Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBAM6
THE STURDY SIMBA M6 IS A LONG-HOLE PRODUCTION DRILL RIG FOR MEDIUM TO LARGE-DRIFT MINING. IT ACCOMMODATES A RANGE OF DRILL BITS, ROCK DRILLS AND IN-THE-HOLE HAMMERS TO ADAPT TO YOUR SPECIFIC NEEDS. THE RIG OPERATOR ENJOYS EXCELLENT VISIBILITY AND ENHANCED SAFETY IN THE COMFORTABLE CABIN. WHEN YOU SEEK A HARD-WORKING, HIGH-PRECISION SOLUTION FOR LONG-HOLE DRILLING, RELY ON THE POWERFUL SIMBA M6.
SIMBA HIGH PRECISION SOLUTION
MAIN BENEFITS
Sturdy and precise The Simba M6 drilling unit is mounted on an I-frame with a pendulum arm for easy setup and steady, accurate drilling.
Suits your needs The Simba M6 can accommodate a wide range of top-hammers and in-the-hole hammers to best suit your opera-tion and optimize your performance, hole quality and drill steel economy.
Precision and productivity The Simba M6 features our acclaimed rig control system (RCS) and can be equipped with smart automated single-hole or multi-hole drilling functions. With tele-remote control, the Simba M6 can be operated from one or more remote locations.
2
SIMBA HIGH PRECISION SOLUTION
The bit changer increases efficiency and keeps the operator at a safe distance from the drilling zone.
The reverse camera enhances visibility and safety while transporting the drill rig.
The cabin is ROPS and FOPS approved for a safe, ergonomic operating environment.
3
+ SAFETY The Simba M6 is designed with safety in mind. The rig operator sits in
a ROPS and FOPS-approved cabin that offers excellent visibility and comfort. Barrier sensors protect the operator and other workers from
rotating parts during automatic drilling.
+ AUTOMATIONBoost your productivity by equipping your Simba M6 with smart
automated functions such as ABC Regular or ABC Total. Your Simba M6 can then effectively continue to drill unattended throughout personnel
breaks and shift changes. With the tele-remote control function, the rig operator can safely and comfortably command the rig from a distance.
+ ATLAS COPCO RIG CONTROL SYSTEMWe introduced the first version of our computerized drill rig control system in 1998 to take the market by storm. Throughout the years, the Rig
Control System (RCS) has been further advanced and refined to include increasingly sophisticated functions informed by practical work experience
and an on-going dialogue with clients. More than 3 000 RCS-equipped rigs are currently in operation the world over. At Atlas Copco, we continue to
drive development in the drilling and mining industry.
+ WORLD CLASS SERVICEFlexiROC T35 and FlexiROC T40 are flexible and versa-tile tophammer drill rigs, developed and designed for high performance in demanding construction appli-cations. They are also a very efficient alternative for small and medi um size quarrying jobs. Even in tough terrain conditions, utilization of the rig is high, thanks to the long reach of the boom, FlexiROC T35 and FlexiROC T40 are flexible and versa-tile tophammer drill rigs, developed and designed for high performance in demanding
FAST AND PRECISE ROCK DRILLINGSIMBA M6SIMBA M6 MODELS ARE BUILT FOR FAST ON-SITE POSITIONING AND ACCURATE HOLE PLACEMENT. INTELLIGENT FUNCTIONS ON THESE HIGH-PERFORMANCE RIGS BOOST EFFICIENCY AND PRODUCTIVITY WHILE MAKING THE OPERATOR’S JOB SAFER AND EASIER.
ATLAS COPCO SERVICE– IT’S NOT JUST ABOUT OUR PROMISES, IT’S ABOUT DELIVERYWe offer several levels of service to meet the requirements of your operation and ensure your productivity. Choose a service agreement that will help you build a quality operation. Minimize unplanned downtime through proactive, planned maintenance. We offer expert advice and maintenance on every machine, component and accessory in our inventory.
4
Atlas Copco Rig Control System (RCS)
Advanced Boom Control (ABC) Regular
Advanced Boom Control (ABC) Total
Breaktrough Automatic Stop
Underground Manager pro
Drill plan handling
Drill plan handling with raise view
Full Drilling Data Handling
Measure While Drilling (MWD)
Void Detection
Remote Cradle Control/Remote Feed Control
Rig Remote Access (RRA)
Mobile Tele Remote/Multi Tele Remote
Remote operating kit
Additional panel
Remote controlled camera on tripod with monitor in cabin
Total Station Navigation
Certiq professional
CONTROL SYSTEM A BCOP 1838+
COP 1838MUX+, COP 1838HUX+
COP 2550UX+
COP 3060MUX
COP 4050MUX
COP 44 to COP 64
Dry drilling system
Collar Pipe Inserter (CPI)
Thread lubrication kit
Bit changer
Water mist flushing, external water and air supply (Hydraulic oil cooled by water cooler)
Water mist flushing, external water and air supply (Hydraulic oil cooled by air fan)
Hole blowing kit
Rock drill lubrication warning kit
DRILLING SYSTEM A B
TECHNICAL SPECIFICATIONS = STANDARD = OPTION A = SIMBA M6 B = SIMBA M6-ITH
Automatic lubrication for drilling and positioning unit
Central lubrication for drilling and positioning unit
Rod Handling System, RHS 17 (17+1 rods) Mechanized drilling up to 32 m
Rod Handling System, RHS 27 (27+1 rods) Mechanized drilling up to 51 m
Rod Handling System, RHS 35 (35+1 rods) Mechanized drilling up to 63 m
Adaptable to 4', 5' and 6' rods
Adaptable to 5' and 6' rods
2 x Rear and 2 x front stinger
BOOM A B C DBOOM/DRILLING UNIT A B
Air flow guard
Compressor: Atlas Copco GAR 5
Compressor: Atlas Copco GAR 30
Compressor: Double GAR 30 +air receiver
Compressor: On-board booster, 25 bar/ 380 l/s
External air supply connection for hole blowing
HECL lubrication system with electric filling pump
AIRSYSTEM A B
Minimum water inlet pressure 2 bar
Hydraulic water booster pump. Capacity, at 15 bar 250 l/min
Water injection pump. Capacity 50 l/min
Water hose reel including hose*
*Not applicable when booster compressor is installed on ITH drill rigs
WATERSYSTEM A B
Low oil level indicator and shut-down
Smart oil leakage shut-down system
Oil temperature gauge on oil tank, electronically supervised
Hydraulic oil thermostat
Water/Oil cooler in stainless steel
Filtration 16 μm
Oil filter indicator
Mineral hydraulic oil
Electrical oil filling pump
Heater kit for hydraulic oil tank, diesel engine and electric motors
Biodegradable hydraulic oil
Nr-Cr plated piston rods (limited selection on request)
HYDRAULIC SYSTEM A B
Total installed power 118 kW (Main motors 2 x 55 kW)
Total installed power 63 kW (Main motor 1 x 55 kW)
Total installed power 158 kW (Main motor 1 x 95 kW, Equipped with booster compressor)
Total installed power 158 kW (Main motors 2 x 75 kW)*
Voltage 400-1 000 V 50/60 Hz
Starting method star/delta (400-690 V)
Soft start of main electrical motors (not for 1000 V)
Electronic overload protection for electric motors
Digial voltmeter/amperage meter in electric cabinet
Electric outlet for accessories, 16 A (CE) / 32 A (CE)
Extra transformer 15 kVA
PC4 or PC5 Plug/Socket
Phase sequence and eart fault indicator
Battery charger
Dual controls for cable reel
Limit switch for cable reel with signal lamp and brake connection
Stainless steel electrical enclosure
*Only when equipped with COP 3060MUX and COP 4050MUX.
ELECTRICAL SYSTEM A B
BMH 200-Series 3 160 mm, 3 465 mm, 3 770 mm
BMH 200-Series (Extractor) 3 365 mm, 3 670 mm, 3 975 mm
BMH 200-Series 3 620 mm, 3 925 mm
FEED A B
5
TECHNICAL SPECIFICATIONS = STANDARD = OPTION A = SIMBA M6 B = SIMBA M6-ITH
ROPS and FOPS approved cabin
Mounting height -140 mm
Cabin lift/tilt system, 375 mm/15º
Swingable seat for drilling and tramming
Front window 22 mm (P8B safety classified)
Reversing camera with monitor
12 V Outlet
Joystick-controlled spotlights left and/or right, 70 W
FOPS-approved grizzly bar for front window
Low-designed cabin, for seated operator cabin height 2 735 mm
Mediaplayer
Air condition
Heating function for air conditioning (water transferred)
Electrical heater, 1.2 kW, 230 V (CE)
Cabin body made of stainless steel
CABIN (OPTIONAL) A B
FOPS approved
Swingable seat for drilling and tramming
Stainless steel
Joystick-controlled spotlights left and/or right, 70 W
PROTECTIVE ROOF A B
Rock drill Rod/Pipe Guide tubes Min. hole diameter (mm)
COP 1838+, HUX+,MUX+
R32 Speedrod TDS 45 51-64
T38 Speedrod TDS 54/TDS 64 64-76
T45 Speedrod TDS 64/TDS 76 76- 89
COP 2550UXT51 TDS 76 76 -115
TDS 64/TDS 76 N/A 89 -102 (ST58 Shank adapter)
COP 3060MUXTDS 76 N/A 89
TDS 87 N/A 102
COP 4050TDS 76 N/A 89
TDS 87 N/A 102-147
COP 44 TAC 76/89 N/A 110-125
COP 54 TAC 89 (TDS102) N/A 134-152
COP 64 TAC 89 (TDS102) N/A 156-178
DRIFTER RODS/PIPES
Operator sound pressure level in canopy, drilling, free field (ISO 11201)
104±6 dB(A) re 20uPa
Operator sound pressure level in cabin, drilling, free field (ISO 11201)
75± 3 dB(A) re 20uPa 75± 3 dB(A) re 20uPa (DH)
Operator sound pressure level working close to machine, drilling, free field
104±6 dB(A) re 20uPa
Peak C-weighted instantaneous sound pressure level (EN16228)
Less than 130 dB
Sound power level (ISO 3747), drilling, free field 128 dB(A) re 1pW
Vibration levels seated, drilling (ISO 2631-1) 0.07± 0.07 m/s^2
Vibration levels standing, drilling (ISO 2631-1) 0.07±0.07 m/s^2
NOISE AND VIBRATION
Voltage Type Dimension (mm2) Diameter (mm) Length (m) Length ITH (m)
380-400 V Buflex 3x185+3G35 56 80 65
440-500 V Buflex 3x150+3G25 52 120 70
550 V Buflex 3x120+3G25 46 120 95
660-690 V Buflex 3x95+3G16 45 150 125
1 000 V Buflex 3x50+3G10 33 200 200
Recommendations are given for surrounding temperature of 40 °C and up to a height of 2 000 m.
RECOMMENDED CABLE SIZE AND LENGTH
On flat ground >15 km/h
On incline 1:8 >5 km/h
TRAMMING SPEED
Rig type Total Boom side Engine side
Simba M6 26 000 kg 14 500 kg 6 400 kg
GROSS WEIGHT (DEPENDING ON CONFIGURATION)
Feed Rod Minimum (H x W)
BMH 214/234 1 220 4 600 x 3 600 mm
BMH 215/235 1 525 4 900 x 3 900 mm
BMH 216/236 1 830 5 200 x 4 200 mm
RECOMMENDED DRIFT SIZE
Measurement Simba M6 Simba M6 ITH
Width 2 210 mm 2 210 mm
Height with cabin 3 100 mm 3 100 mm
Height roof up/down 3 050/2 945 mm 3 144/2 518 mm
Length tramming 10 420 mm 10 720 mm
Ground clearence 265 mm 265 mm
Turning radius outer/inner 6 900/3 800 mm 7 625/4 750 mm
DIMENSIONS
Deutz TCD 2013 L04 2V Stage III A Tier 3 (120 kW)
Deutz TCD 4.1 L04 Stage IV / Tier 4F (115 kW)
Deutz TCD 2012 L06 2V Stage III A Tier 3 (155 kW)
Deutz TCD 6.1 L06 Stage IV / Tier 4F**
Front axel DANA Spicer 123/90
Rear axel DANA Spicer 123/90 ±8° oscillation
Articulated steering ±41° steering angle
Four-wheel drive
Electric system 24 V
Batteries 2 x 125 Ah
Hose/cable guiding at water/cable reel
Automatic differential lock on front axle, limited slip
Tires 12 x R24
Tramming lights 8 x 22 LED, 24 V DC
Working lights 4 x 150 LED, 24 V DC
Rig alignment laser
Illuminated stairs for platform LED
Front and rear jacks
Fuel tank, volume 110 L
Central grease point
Fire suppression system ANSUL (manual or automatic)
Fire suppression system FORREX (manual or automatic)
Hot climate tramming kit
Rig washing kit*
Manual lubrication kit
Boot washing kit*
*Not applicable when equipped with dry drilling system.**Maximum ambient temperature 25°
CARRIER A B
6
3 10
0
2 900 3 740 3 7802 023
10 420
www.atlascopco.com
M6 C
M6 C
TECHNICAL SPECIFICATIONS
380o
30o
45 o
3 000 (PH)
5 00
05
650
8 520
Stinger extension
Stinger extension2 000
150
Dimensions in mm
RD = Ring drillingPH = Parallel holes
Feed extension1 200 (900)
R 2 760 (RD)
R 4 880 (RD)
1 15
090
0
2 78
0
A-A
45o45
o
A
A
Simba M6/Simba M6-ITH
3 10
0
2 0503 7803 7403 200
www.atlascopco.com
M6 C-ITH
M6 C-ITH
10 720
Simba M6-ITH, equipped with booster compressor.
Coverage area
7
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call – Sustainable Productivity.
98
51 3470 01b 2
016-11 Ö
reb
ro, Sw
ed
en. L
eg
al Notice ©
Co
pyright 2
016, A
tlas Co
pco R
ock D
rills AB
, Öre
bro, S
we
den
. Any un
auth
orize
d use or co
pying of the co
ntents or any p
art thereof is p
rohib
ited
. Illustrations
and p
hoto
s may sh
ow e
quip
ment w
ith optio
nal extras. N
o warranty is m
ade re
gard
ing sp
ecificatio
ns or otherw
ise. Sp
ecificatio
ns and e
quip
ment are su
bje
ct to chan
ge w
itho
ut n
otice. Co
nsult your A
tlas Co
pco C
ustom
er C
enter for sp
ecific info
rmatio
n.
www.atlascopco.com