TECHNICAL SPECIFICATIONS 200 SERIES BALLISTIC INSERTS BI P210 · BI P210 LEVEL IIIA+ STAND ALONE 18JAN10 PT005_P210 Recommended side plate pairing: BI P110 SHOOTER CUT - MULTI CURVE

US and Americas Inquiries Hesco Armor, Inc., 2210 Port Industrial Road, Aberdeen, WA 98520, United StatesTelephone: +1 360-637-6867

UK and Rest of World Inquiries Hesco Bastion Ltd., Unit 41, Knowsthorpe Way,Leeds LS9 0SW, United KingdomTelephone: +44 1 13 248 6633

Email: [email protected]

Disclaimer The information contained in this document is intended solely to provide general guidance. The right is reserved to make changes to this document without notice at any time. Nothing in this document (i) constitutes an offer, representation, warranty, term or condition or (ii) is a substitute for the need to employ adequate independent technical expertise and judgment.

Patents and Trademarks HESCO® products are subject to patents and/or patent applications in territories around the world. HESCO® is a registered trademark of Hesco Bastion Ltd and its affiliates (“Hesco”) around the world. Other trademarks also apply.

For full details, please go to: www.hesco.com/legal_notice

Quality Standards Hesco operates a quality management system certified to ISO 9001:2008. Approved Certificate Numbers: C2016-01513; BA9000: 2012; AQAP 2110

This material is subject to copyright protection. Copyright © 2018 Hesco. All rights reserved.

hesco.com

TECHNICAL SPECIFICATIONS 200 SERIES BALLISTIC INSERTS

BI P210 LEVEL IIIA+ STAND ALONE

18JA

N10

PT

00

5_P2

10

Recommended side plate pairing: BI P110

SHOOTER CUT - MULTI CURVE - TORSO PLATES

PART NUMBER WIDTH x LENGTH WEIGHT

P210-SH-MC-L10.0 x 12.0 in(254 x 305 mm)

1.0 lb(0.5 kg)

P210-SH-MC-S8.0 x 10.0 in(203 x 254 mm)

0.6 lb(0.3 kg)

FULL CUT - MULTI CURVE - TORSO PLATES


P210-FC-MC-L10.0 x 12.0 in(254 x 305 mm)

1.1 lb(0.5 kg)

P210-FC-MC-S8.0 x 10.0 in(203 x 254 mm)

0.7 lb(0.3 kg)

SHOOTER CUT - SINGLE CURVE - TORSO PLATES


P210-SH-SC-L10.0 x 12.0 in(254 x 305 mm)

1.0 lb(0.4 kg)

P210-SH-SC-S8.0 x 10.0 in(203 x 254 mm)

0.6 lb(0.3 kg)

FULL CUT - SINGLE CURVE - TORSO PLATES


P210-FC-SC-L10.0 x 12.0 in(254 x 305 mm)

1.0 lb(0.5 kg)

P210-FC-SC-S8.0 x 10.0 in(203 x 254 mm)

0.7 lb(0.3 kg)

THICKNESS: 0.27 in (7 mm)

NIJ Standard–0101.06Special threat testing conducted in accordance with NIJ Standard–0101.06 (modified).

NIJ Standard–0108.01Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard–0108.01.

200 SERIES

P210-SH-MC-L 6 6 6 6 6 6 6 6

P210-SH-MC-S 3 3 3 3 3 3 3 3

P210-SH-SC-L 6 6 6 6 6 6 6 6

P210-SH-SC-S 3 3 3 3 3 3 3 3

P210-FC-MC-L 6 6 6 6 6 6 6 6

P210-FC-MC-S 3 3 3 3 3 3 3 3

P210-FC-SC-L 6 6 6 6 6 6 6 6

P210-FC-SC-S 3 3 3 3 3 3 3 3

P210-SA-MC-XL 6 6 6 6 6 6 6 6

P210-SA-MC-L 6 6 6 6 6 6 6 6

P210-SA-MC-M 6 6 6 6 6 6 6 6

P210-SA-MC-S 3 3 3 3 3 3 3 3

P210-SA-MC-XS 3 3 3 3 3 3 3 3

9 x 19

mm

Para

bellum

.45 ACP

.40 S

&W

FN 5,7 x 2

8 mm

.357 Magnum

.357 SIG

.44 M

agnum

7.62 x

25 mm

Toka

rev

THREAT PERFORMANCE MATRIX

Hesco Testing Protocol

NIJ Certification of hard armor requires submission of 10” x 12” test plates which must demonstrate the ability to defeat specific rounds tested to a valid NIJ shot pattern, after exposure to a stringent conditioning protocol to simulate aging and wear. Level IIIA requires six .357 sig (9 mm FMJ in the case of NIJ 0108.01) and six .44 mag per plate.

NIJ’s process provides for the inclusion of other size torso plates of identical construction to be included under the Certification without further NIJ testing.

Hesco holds itself to a higher standard by publishing the minimum number of shots that each size plate can be expected to defeat under similar NIJ testing methods, as well as listing many additional threats not addressed under the NIJ Certification process. The minimum number of shots are shown in the Threat Performance Matrix.

Additional ammunition types were tested within some of the matrix categories. Contact Hesco Armor for a complete list.

Export Control AdvisoryModel BI P210 (ECCN 1A005.b) is subject to the Export Administration Regulations (EAR). It may not be sold or otherwise provided to any non-U.S. Person and/or exported or re-exported without a valid U.S. Department of Commerce BIS export license, or applicable EAR license Exception.

Manufacturing Tolerances: Actual nominal sizes are 0.2 inches smaller than listed. Thickness dimensions are ± 1/8 in (± 3 mm).Width and length dimensions are ± 0.13 in (± 3 mm).All weights are ± 5%.

SH

OO

TE

R

SA

PI

FUL

L

General InformationAdvanced UHMWPE design. Buoyant. Multi shot rated on selected threats. Water repellant polyurethane coated CORDURA® fabric finish. Made in the U.S.A.

MULTI CURVE AND SINGLE CURVE

SAPI CUT - MULTI CURVE - TORSO PLATES


P210-SA-MC-XL11.00 x 14.00 in(279 x 356 mm)

1.4 lb(0.6 kg)

P210-SA-MC-L10.25 x 13.25 in(260 x 337 mm)

1.2 lb(0.5 kg)

P210-SA-MC-M9.50 x 12.50 in(241 x 318 mm)

1.0 lb(0.5 kg)

P210-SA-MC-S8.75 x 11 .75 in(222 x 298 mm)

0.9 lb(0.4 kg)

P210-SA-MC-XS7.25 x 11.50 in(184 x 292 mm)

0.7 lb(0.3 kg)









hesco.com

SH

OO

TE

R

FUL

LSHOOTER CUT - SINGLE CURVE - TORSO PLATES


L210-SH-SC-L10.0 x 12.0 in(254 x 305 mm)

5.5 lb(2.5 kg)

L210-SH-SC-S8.0 x 10.0 in(203 x 254 mm)

3.5 lb(1.6 kg)

FULL CUT - SINGLE CURVE - TORSO PLATES


L210-FC-SC-L10.0 x 12.0 in(254 x 305 mm)

6.1 lb(2.8 kg)

L210-FC-SC-S8.0 x 10.0 in(203 x 254 mm)

4.0 lb(1.8 kg)


BI L210 SPECIAL THREAT RIFLE STAND ALONE

18JA

N10

PT

00

5_L2

10


Recommended side plate pairing: BI L110

Manufacturing Tolerances: Thickness dimensions are ± 1/8 in (± 3 mm). Width and length dimensions are +0.00 to -0.25 in (+0.00 to -6 mm). All weights are ± 5%.

General InformationCeramic/composite design. Light AP protection including 7.62 x 39 API. Multi shot rated on selected threats. Water repellant polyurethane coated 1000 Denier CORDURA® fabric finish. Made in the U.S.A.



NIJ Certification of hard armor requires submission of 10” x 12” test plates which must demonstrate the ability to defeat specific rounds tested to a valid NIJ shot pattern, after exposure to a stringent conditioning protocol to simulate aging and wear.



Export Control AdvisoryModel BI L210 (ECCN 1A613.d.2) is subject to the Export Administration Regulations (EAR). It may not be sold or otherwise provided to any non-U.S. Person and/or exported or re-exported without a valid U.S. Department of Commerce BIS export license, or applicable EAR license Exception.

200 SERIES

L210-SH-SC-L 6 6 6 3 1

L210-SH-SC-S 3 3 3 3 1

L210-FC-SC-L 6 6 6 3 1

L210-FC-SC-S 3 3 3 3 1

5.56 x 45 m

m –

MI93

Max Velo

city 3

150 ft/s

(960 m/s)

7.62 x

39 mm

- M67

Max Velo

city 2

390 ft/s

(728 m/s)

5.56 x 45 m

m - M855/S

S109

Max Velo

city 3

150 ft/s

(960 m/s)

7.62 x

39 mm

– M43

Max Velo

city 2

390 ft/s

(728 m/s)

7.62 x

39 mm

- API

Max Velo

city 2

390 ft/s

(728 m/s)

LEAD CORE ARMORPIERCING COREMILD STEEL CORE










hesco.com


BI U210 SPECIAL THREAT RIFLE STAND ALONE

18JA

N10

PT

00

5_U

210


Recommended side plate pairing: BI L110

Manufacturing Tolerances: Thickness dimensions are ± 1/8 in (± 3 mm). Width and length dimensions are +0.00 to -0.25 in (+0.00 to -6 mm). All weights are ± 5%.

SHOOTER CUT - MULTI CURVE - TORSO PLATES


U210-SH-MC-L10.0 x 12.0 in(254 x 305 mm)

3.9 lb(1.8 kg)

U210-SH-MC-S8.0 x 10.0 in(203 x 254 mm)

2.6 lb(1.2 kg)

SAPI CUT - MULTI CURVE - TORSO PLATES


U210-SA-MC-XL11.00 x 14.00 in(279 x 356 mm)

5.4 lb(2.5 kg)

U210-SA-MC-L10.25 x 13.25 in(260 x 337 mm)

4.7 lb(2.1 kg)

U210-SA-MC-M9.50 x 12.50 in(241 x 318 mm)

4.1 lb(1.9 kg)

U210-SA-MC-S8.75 x 11 .75 in(222 x 298 mm)

3.5 lb(1.6 kg)

U210-SA-MC-XS7.25 x 11.50 in(184 x 292 mm)

2.8 lb(1.3 kg)

General InformationAdvanced Spectra® design. Full AK-47 protection including 7.62 x 39 API. Multi shot rated on selected threats. Water repellant polyurethane coated CORDURA® fabric finish. Made in the U.S.A.



NIJ Certification of hard armor requires submission of 10” x 12” test plates which must demonstrate the ability to defeat specific rounds tested to a valid NIJ shot pattern, after exposure to a stringent conditioning protocol to simulate aging and wear.



Export Control AdvisoryModel BI U210 (ECCN 1A613.d.2) is subject to the Export Administration Regulations (EAR). It may not be sold or otherwise provided to any non-U.S. Person and/or exported or re-exported without a valid U.S. Department of Commerce BIS export license, or applicable EAR license Exception.

200 SERIES

U210-SH-MC-L 3 3 3 3 3 1

U210-SH-MC-S 3 3 3 1 3 1

U210-SA-MC-XL 3 3 3 3 3 1

U210-SA-MC-L 3 3 3 3 3 1

U210-SA-MC-M 3 3 3 3 3 1

U210-SA-MC-S 3 3 3 1 3 1

U210-SA-MC-XS 3 3 3 1 3 1

5.56 x 45 m

m –

MI93

Max Velo

city 3

150 ft/s

(960 m/s)

7.62 x

39 mm

- M67

Max Velo

city 2

390 ft/s

(728 m/s)

5.56 x 45 m

m - M855/S

S109

Max Velo

city 3

150 ft/s

(960 m/s)

5.56 x 45 m

m - M855A1

Max Velo

city 3

030 ft/s

(923 m/s)

7.62 x

39 mm

– M43

Max Velo

city 2

390 ft/s

(728 m/s)

7.62 x

39 mm

- API

Max Velo

city 2

390 ft/s

(728 m/s)

LEAD CORE ARMORPIERCING COREMILD STEEL CORE


SH

OO

TE

R

SA

PI

Documents

TECHNICAL SPECIFICATIONS 200 SERIES BALLISTIC INSERTS BI P210 · BI P210 LEVEL IIIA+ STAND ALONE 18JAN10 PT005_P210 Recommended side plate pairing: BI P110 SHOOTER CUT - MULTI CURVE