13
TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL CURTAIN AND PERFECT WAVE) KIT SPECIFICATIONS MOTOR SPECIFICATIONS REMOTE CONTROL SPECIFICATIONS BULK SERVICE 2-5 6-8 9-10 11-13

TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

1

TECHNICAL SPECIFICATIONS AND BULK SERVICE

(TRADITIONAL CURTAIN AND PERFECT WAVE)

• KIT SPECIFICATIONS

• MOTOR SPECIFICATIONS

• REMOTE CONTROL SPECIFICATIONS

• BULK SERVICE

2-5

6-8

9-10

11-13

Page 2: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

2

• KIT SPECIFICATIONS:

GENERAL PROPERTIES:

- The motor is silent and does not vibrate, and the curtain slides smoothly.

- With the motor running, the curtain can be closed and open manually.

- The motor can register an intermediate position, which will be stored in its memory

even if it is turned off and on again.

- The assembly is simple, as well as its installation.

- If the motor is off, you can use the curtain manually.

- Several motorized tracks can be controlled with the same remote control. In

addition, the motorized track is compatible with domotic installations.

- The maximum weight supported: 50 kg and Maximum length: 8.11 m.

- The motorized track can be controlled by a remote control, a wall switch, a mobile

app or domotic systems.

- The motor is covered by the curtain.

- You can choose between side or center opening.

- The motorized track can be installed on the wall or the ceiling (in the latter you will

need special brackets).

- The motorized track works with heavy and light curtains.

TECHNICAL SPECIFICATIONS:

- Material: aluminum

- Colors: white (electrophoretic painting) and metallic

- Profile dimensions: 1.70 x 4.20 x 100 cm

- Kit dimensions (box): 106 x 30 x 7.5 cm

- Box Weight: 5-6kg (depending on the profile units you carry)

- When installing the rail (with or without curve), check the distances that must be

left with the walls for proper operation (page 3).

Page 3: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

3

Page 4: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

4

KIT STANDARD COMPONENTS:

ADDITIONAL COMPONENTS:

1 set

1 unit / m + 1

8 units

1 unit /

2 units

2 units

1 unit

1 unit

1 unit

1 unit

* Only for wave system (in replacement of 2427 and 2908).

Page 5: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

5

Reference number

Nam

e Track length

Motor

Remote

control Standard

Components

Window

size

2103 Kit 3

3

BCM100D

BE201

yes <3,20m

2104 Kit 4

4 yes

<4,20m

2106 Kit 6

6 yes

<6,20m

2108 Kit 8

8 yes

<8,20m

KITS AV

AILA

BLE IN A

MA

ZON

(.es, .it, .fr, .de, .co.uk)

Contact us for other combinations.

Page 6: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

6

• MOTOR SPECIFICATIONS: GENERAL PROPERTIES:

- It's silent and does not vibrate. - The motor has memory (being able to register an intermediate position) and its

activity can be programmed. - The maximum weight that the motor supports are 50 kg.

TECHNICAL SPECIFICATIONS:

- Dimensions: 4.9 x 4.9 x 24.6cm - Weight (with packaging): ~ 1.7kg - Color: white - Integrated AC / DC converter - Voltage: AC 110V ~ 230V - Power: 40W - Cable length (*): 125 cm - Radio control:> 50m - Protection: IP20 - Nominal torque: 12Nm - 3-year warranty.

(*) The cable comes with a screw terminal. You will need to buy the connection plug separately.

Page 7: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

7

Reference num

ber N

ame

Motor pow

er W

ifi control

Radio-control

Switch

(MO

DEL 1) Sw

itch (M

ODEL 2)

Z-wave

Zigbee Com

patible w

ith Domotic

Wires

Specifications

BCM100D

MO

TO

R

3C

E

lectric

cu

rren

t N

o

Ye

s Y

es

No

N

o

Un

de

r

req

ue

st

No

3

-

BCM100D-

RS485 M

OT

OR

RS

Ele

ctric

cu

rren

t N

o

Ye

s Y

es

No

N

o

No

Ye

s (bu

s

co

ntro

l) 3

W

ith R

S-4

85

BCM100DC

MO

TO

R

4C

E

lectric

cu

rren

t N

o

No

N

o

Ye

s N

o

No

No

4

Use

in h

ote

ls.

BCM100D5X

MO

TO

R

5C

E

lectric

cu

rren

t N

o

Ye

s Y

es

Ye

s U

nd

er

req

ue

st

No

Ye

s (z-w

ave

)

5

Use

in h

ote

ls.

BCM100DB

MO

TO

R

BA

T

Lith

ium

Batte

ry

No

Y

es

Ye

s N

o

No

N

o

No

3

Lo

w c

on

su

mp

tion

. 5

mo

nth

s a

uto

no

my.

BCM700D-TY

MO

TO

R

TY

E

lectric

cu

rren

t Y

es

Ye

s Y

es

No

N

o

No

Ye

s (wifi)

3

Co

mp

atib

le w

ith T

uya,

Ale

xa

, Go

ogle

MO

TO

RS

:

Page 8: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

8

MO

DE

L 2

: M

OD

EL 1

:

wire

s

wire

s

3 a

nd

5 w

ire

s

Page 9: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

9

• REMOTE CONTROL SPECIFICATIONS: GENERAL PROPERTIES:

- Both the control and wall control allow to control the activity of the motorized track. - The remote control works with 2 1.5V batteries (AAA) and the wall control with a

3V button cell (CR2032). - The remote control has a back cover, which is removed as shown in figure 1. - The button is divided into a remote control and a bracket (figure 2). - The installation of the wall control can be done with double-sided tape (included),

screws or using the magnet on the back. TECHNICAL SPECIFICATIONS:

- Dimensions (remote control): 12,5 x 3,8 x 1,1 cm

- Frequency: 433,92 MHz - Output power: 10mW - Work temperature: -10 ~ 50ºC

- Dimensions (Wall control): 8 x 8 x 1,9 cm

- Frequency: 433,92 MHz - Output power: 10mW - Work temperature: -10 ~ 50ºC

figure 1 figure 2

Page 10: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

10

Reference N

ame

Power

Channels* Bracket m

ount Specifications

BE102 PU

LSAD

OR 2C

1 button cell 3V

(CR2032) 2

Yes U

se in hotels.

BE201 M

AN

DO

1C 2 batteries 1,5V

(AA

A)

1 U

nder request -

BE206 M

AN

DO

6C 2 batteries 1,5V

(AA

A)

6 U

nder request -

BE216L M

AN

DO

16L 2 batteries 1,5V

(AA

A)

16 U

nder request -

BE216LT M

AN

DO

16LT 2 batteries 1,5V

(AA

A)

16 U

nder request -

REMO

TE AN

D W

ALL CO

NTRO

LS:

* 8 motorized tracks can be introduced in each channel. The com

mands w

ill be the same for all of them

.

Page 11: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

11

BULK SERV

ICE: W

e also offer you the opportunity to buy the components individually:

1 2

3 4

5 6

7 8

9 10

11 12

13 14

15 16

17 18

19 20

1 PRO

FILE [de 4,20 m

] 1

1 1

1 2

2 2

2 3

3 3

3 4

4 4

4 5

5 5

5

2 PU

LLEYS – PU

LLEYS (WS)

[sets]

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

1 –

1

3 BELT [m

] 2.3

4.3 6.3

8.3 10.3

12.3 14.3

16.3 18.3

20.3 22.3

24.3 26.3

28.3 30.3

32.3 34.3

36.3 38.3

40.3

4 M

ASTER CA

RRIERS – M

ASTER CA

RRIERS (WS)

[sets]

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

2 –

1

5 CA

RRIERS [units] – CA

RRIERS (WS) [m

]

8 –

1.5

16 –

2.5

24 –

3.5

32 –

4.5

40 –

5.5

48 –

6.5

56 –

7.5

64 –

8.5

72 –

9.5

80 –

10.5

88 –

11.5

96 –

12.5

104 –

13.5

112 –

14.5

120 –

15.5

128 –

16.5

136 –

17.5

144 –

18.5

152 –

19.5

160 –

20.5

6 CEILLIN

G BRA

CKETS [units]

2 3

4 5

6 7

8 9

10 11

12 13

14 15

16 17

18 19

20 21

7 CO

NN

ECTION

S [units] 0

0 0

0 1

1 1

1 2

2 2

2 3

3 3

3 4

4 4

4

8 M

otor [units] 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1

9 Rem

ote control / W

all control [units] 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1

(WS): W

ave system.

Nam

e

Track length [m

]

Page 12: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

12

Price of the different components:

REFERENCE NAM

E BO

X

Unitary Price (€)

Units / Box Box Price (€)

1 2010

PROFILE

[ 4,20 m]

10,40 € / 4,20m

(4.20m x 10 uds) = 42m

104,00

2 2221 –

2221P*

PULLEYS SET –

PULLEYS SET (W

S) [units]

4,40 € / set –

4,50 € / set

5 sets –

5 sets

22 –

22,50

3 2009

CORREA [m

] 2,00 € / m

100m

200

4 2427 –

2429*

MA

STER CARRIERS SET – M

ASTER CARRIERS SET (W

S) [units]

2,00 € / set –

7,18 € / set

10 sets –

10 sets

20 –

71,80

5 2908 –

2910* CA

RRIERS [units] – CA

RRIERS (WS) [m

]

0,16 € / unit –

6,68 € / m

200 units –

40m

32,00 –

267,20

6 2508

CEILLING

BRACKETS

[units] 0,60 € / unit

20 units 12

7 2907

CON

NECTIO

N

[units] 2,00 € / unit

20 units 40

8

BCM100D

BCM100DB

BCM100D5X

BCM100DRS485

Motor

[units]

78,00

179,80

88,00

93,00

1 unit -

9

BE102 BE201 BE206 BE216L

BE216LT

Remote Control / W

all Control [units]

12,00

12,00

16,00

20,90

23,80

1 unit -

Longitud del riel [m

]

* Only for w

ave system (in replacem

ent of 2221, 2427 and 2908).

Page 13: TECHNICAL SPECIFICATIONS AND BULK SERVICE (TRADITIONAL

13

Reference Description Photo Specifications 2010 PROFILE

(4,20m x 10) / box

2907 CONNEXION

20 units / box

2221 PULLEYS 5 sets / box 1 motor pulley

1 normal pulley

2 metallic brackets

2 units (1) 2 units (2)

1 measuring device

2221P* PULLEYS (WS) 5 sets / box

1 motor pulley

1 simple pulley

2 metallic brackets

2 units (1) 2 units (2)

1 measuring device

2009 BELT

100 m

2427 MASTER CARRIER SET 1 master carrier

10 sets / box

2 units (1)

2 units (2)

2429 * MASTER CARRIERS SET (WS) 10 sets / box 1 long master carrier

1 short master carrier

4 units (1)

4 units (2)

2508 CEILLING BRACKET

20 units / box

2908 CARRIERS

200 units / box

2910 * CARRIERS (WS)

40 m / roll

BCM100D BCM100D-RS485

BCM100DC BCM100D5X BCM100DB

MOTOR

1 unit

BE201 BE202 BE206

BE216L BE216LT

REMOTE CONTROL

1 unit

BE102 WALL CONTROL

1 unit

2011 90º ANGLE 1 set / box

1 90º angle

1 special master carrier

2 units (3)

2 units (4)

2012 135º ANGLE 1 set / box

135º angle

1 special master carrier

2 units (3)

2 units (4)

COMPONENTS:

* Only for wave system (in replacement of 2221, 2427 and 2908). WS: wave system.