main

TeamEnter team name belowPlease ensure the latest picture of the car is submitted in the online submission systemAnswers required84Answers requiredEnter ID belowEnter Vehicle name belowMissing data84Missing data

Enter vehicle category belowCar cost0Correct answers0Correct answersEnter energy type belowLogistics cost0Score0%ScoreERROR:#REF!NOT hybrid% funding obtained0Input statusIncompleteInput statusIncomplete ( 84 missing )Weight of car0CompliancePassComplianceEnter car history belowEnter car development status belowData rangeFormulasFor NA resultsAnswersComments

ArticleTechnical specificationsInputCalculatedMinMaxDataBlanksEntryResultLimit_OKLinklink2CorrectAnyMinMaxShell commentsComments

Team details.......anyTeam ID > Please fill in09999 > TRUE0 > Within rangeanyTeam name > Please fill in > TRUE0 > Within rangeanyVehicle name > Please fill in > TRUE0 > Within rangeany53Energy type > Please fill in > TRUE0 > Within rangeanyVehicle category > Please fill in > TRUE0 > Within rangeanyIs it a hybrid vehicle (internal combustion + electrical)?Not applicableTRUENANAFALSEis_iceanyCar history > Please fill in > TRUE0 > Within rangeanyCar development status > Please fill in > TRUE0 > Within rangeanyCost of building car (USD) > Please fill in01000000 > TRUE0 > Within rangeanyCost of shipping, air fare, accommodation (USD) > Please fill in01000000 > TRUE0 > Within rangeanyPercentage of funding already obtained (%) > Please fill in0100 > TRUE0 > Within rangeanyIs the SEM part of your curriculum > Please fill in > TRUE0 > Within rangeany16Radio Communication.......Are you using radio communication? > Please fill in > TRUE0 > Within rangeanyIs it handsfree? > Please fill in > TRUE0 > Within rangeis_radioyesRadio communication must be handsfree20Driver weight.......Driver weight with ballast > Please fill in0200 > TRUE0 > FALSEyes50500Driver weight with ballast must be > 50 kgIs ballast requred to meet the required weight > Please fill in > TRUE0 > Within rangeanyIf ballast is used, what type is it? > Please fill in > TRUE0 > Within rangeis_ballastERROR:#N/ABallast can only be in the form of diving weights or running weights20Helmets.......Type of helmet > Please fill in > TRUE0 > Within rangeERROR:#N/AOnly a full face mask or 3/4 mask with full face shield/visor is allowed23Driver comfort.......Cockpit ventilation present > Please fill in > TRUE0 > Within rangeyesThere should be cockpit ventilation25Vehicle design.......Number of wheels > Please fill in06 > TRUE0 > FALSEyes44Prototype cars have only 3 or 4 wheels, while UrbanConcept cars must have 4 wheelsSharp edges/objects outside or inside vehicle > Please fill in > TRUE0 > Within rangenoNo sharp edges allowedAerodynamic appendages (flaps that move with wind) > Please fill in > TRUE0 > Within rangenoNo aerodynamic appendages allowedSharp objects inside the vehicle > Please fill in > TRUE0 > Within rangenoNo sharp objects allowedCar has a rigid and solid floor > Please fill in > TRUE0 > Within rangeyesThe car must have a rigid and solid floorIs the car an open top car? > Please fill in > TRUE0 > Within rangenoOpen top cars are no longer allowed - it must be completely coveredEngine compartment cover can be opened quickly > Please fill in > TRUE0 > Within rangeyesThe engine compartment must be able to be opened quicklyAll parts of drive train within body cover > Please fill in > TRUE0 > Within rangeyesAll parts of the drive train should be within the body coverAll parts securely mounted, including battery, cables, wires > Please fill in > TRUE0 > Within rangeyesAll parts must be securely mounted, especially the battery, cables and wires that might come in contact with the wheels26Chassis/Vehicle roll bar.......Distance (gap) between rollbar and driver's helmet (cm) > Please fill in0100 > TRUE0 > FALSE51300Not enough clearance to rollbar (5 cm minimum)Extends beyond driver's shoulders > Please fill in > TRUE0 > Within rangeyesRollbar should extend beyond shouldersRoll bar withstands 70 kg (154 lbs) static load > Please fill in > TRUE0 > Within rangeyesRollbar must withstand 70 kg static loadChassis/monocoque wide/long enough to protect driver > Please fill in > TRUE0 > Within rangeyesBody/chassis should be big enough to protect driver27Engine and Fuel system isolation from driver.......yesRigid and fire resistant Bulkhead > Please fill in > TRUE0 > Within rangeyesRigid and fire resistant bulkhead requiredAre there any gaps between bulkhead and cover? > Please fill in > TRUE0 > Within rangenoThere should be no gaps between the bulkhead and the body coverEngine/energy compartment accessible by the driver > Please fill in > TRUE0 > Within rangenoThe bulkhead must prevent manual access to the engine / energy compartment by the driverEngine compartment accessible for fueling/inspection > Please fill in > TRUE0 > Within rangeyesThe fuel/power system should be easily accessible for fueling, measurent and inspection28Visibility.......yesDirect visibility : arc of 180 > Please fill in > TRUE0 > Within rangeyes180 visibility required2 rear view mirrors of 25 cm > Please fill in > TRUE0 > Within rangeyes2 rear view mirrors of 25 cm2 each requiredWet weather visbility - windscreen wipers [UrbanConcept]Not applicableTRUENANAFALSEis_urbanyesUrbanConcept cars need windscreen wipers29Safety belts.......yesSafety belts able to withstand 1.5 x drivers weight > Please fill in > TRUE0 > Within rangeyesSafety belt must withstand 1.5 x driver weightSolid chassis mounting > Please fill in > TRUE0 > Within rangeyesSafety belt must be anchored rigidly to chassis5 mounting points, including crotch point > Please fill in > TRUE0 > Within rangeyesSafety belt requires 5 chassis mounting pointsIs the seatbelt loose when the driver is buckled in? > Please fill in > TRUE0 > Within rangenoThe seat belt must be adjusted so that the driver is held in tightly (should be almost uncomfortable)Seatbelt adjusters positioned so length adjustment is possible? > Please fill in > TRUE0 > Within rangeyesThe seat belt adjuster must be positioned so that adjustment of belt length is possible (usually at chest level)Top harness mounting is 10 below shoulder of driver > Please fill in > TRUE0 > Within rangeyesThe top harness mounting must be 10 below shoulder of driverLap belt joint free to self align to direction of load > Please fill in > TRUE0 > Within rangeyesLap belt joint should be free to self align to direction of load (usually 45-60)How many release buttons are there? > Please fill in060 > TRUE0 > FALSE11There should be only ONE release button30Vehicle access.......yesDriver exit time (seconds) > Please fill in060 > TRUE0 > Within range10Each driver must be able to exit in 10 seconds maxGood closing of body > Please fill in > TRUE0 > Within rangeyesVehicle body must close properlyAbility to open door/opening from inside > Please fill in > TRUE0 > Within rangeyesIt should be possible to open the door from inside & outsideAdhesive tape used for door/opening > Please fill in > TRUE0 > Within rangenoAdhesive tape is not allowed for door/openingMethod of opening marked on outside > Please fill in > TRUE0 > Within rangeyesMethod of opening should be marked on outside31Horn: Standard and operational.......yesHorn is operational > Please fill in > TRUE0 > Within rangeyesHorn should be functioningFrequency/Tone (Hz) > Please fill in02000 > TRUE0 > FALSE4209999Horn frequency should be > 420 HzDecibels @ 4 m away from vehicle (dB) > Please fill in0500 > TRUE0 > FALSE859999Horn sound level should be > 85 dB @ 4 m32Extinguisher 1 Kg (will be provided by Shell in SEM Asia).......yesSolidly attached (not loose) > Please fill in > TRUE0 > Within rangeyesExtinguisher should be firmly attached33Driving position.......yesLeg forward position (not head first) > Please fill in > TRUE0 > Within rangeyesHead forward position not allowed34Clutch and Transmission.......yesClutch system in place [internal combustion only]Not applicableTRUENANAFALSEis_iceyesA clutch system should be in placeIs an automatic transmission used?Not applicableTRUENANAFALSEis_iceanyStarter motor speed below clutch engagement speed [auto only]?Not applicableTRUENANAFALSEis_iceis_autoyesThe starter motor speed should be below the engagement speed of the auto clutchStarter motor cannot engage clutch [manual clutch only]?Not applicableTRUENANAFALSEis_iceis_manualyesAn interlock should prevent starter motor from running when clutch is engagedVehicle has idling capabiltity [UrbanConcept only]?Not applicableTRUENANAFALSEis_iceis_urbanyesUrbanConcept cars need idling capabilityIs a chain / belt used to transmit power > Please fill in > TRUE0 > Within rangeyesanyChain or belt guard in place (or no chain/belt used) > Please fill in > TRUE0 > Within rangechainyesA chain / belt guard is needed35Exhaust system.......yesEvacuate outside the bodyNot applicableTRUENANAFALSEis_iceyesThe exhaust pipe must exit outside the bodyExhaust pipe sticks out very far from the car body (> 2 cm)Not applicableTRUENANAFALSEis_icenoThe exhaust pipe cannot extend more than one or two cm beyond the vehicle bodyReasonable emission levelsNot applicableTRUENANAFALSEis_iceyesThere should not be excessive black smoke36Sound level.......yesSound > 90 dB @4m from vehicle > Please fill in > TRUE0 > Within rangenoSound level should be < 90 dB @4m distance37Emergency shut down mechanism.......yesExternal emergency shut down mechanism present > Please fill in > TRUE0 > Within rangeyesThe emergency shut down system should be operable from outside the vehicleInternal emergency shut down mechanism present > Please fill in > TRUE0 > Within rangeyesThe emergency shut down system should be operable from inside the vehicleStops engine / motor > Please fill in > TRUE0 > Within rangeyesThe shutdown system must stop the engine/motorPhysical isolation of propulsion bat & elec system [bat elec]?Not applicableTRUENANAFALSEis_pure_elecyesFor battery cars, the shutdown system should physically isolate the propulsion systemIs it a red push button? > Please fill in > TRUE0 > Within rangeyesThe shutdown system must be activated by a RED push buttonDoes it latch (and unlatch in a different way - e.g. by turning) > Please fill in > TRUE0 > Within rangeyesThe shutdown button must latch once engaged, and disengage in a different way (e.g. turning)Switch location shown by red arrow with white border > Please fill in > TRUE0 > Within rangeyesThe location of the emergency shutdown switch should be shown by a red arrow with white borderIs the shutdown switch part of the detachable bodywork? > Please fill in > TRUE0 > Within rangenoThe emergency shutdown switch must not be part of the detachable bodyworkHas Dead man's switch that disengages propulsion/kills engine > Please fill in > TRUE0 > Within rangeyesA deadman's switch is required to stop propulsion if the driver is incapacitated39Vehicle dimensions - Prototype.......Height (mm)Not applicable02000TRUENANAFALSEis_protoyes01000Height should be < 1000 mmTrack width (mm)Not applicable02000TRUENANAFALSEis_protoyes5001300Track width should be > 500 mmHeight-Track width ratio (calculated)Not applicable10.00TRUENANAFALSEis_protoyes1.25Please reduce height or increase track width (Height:Track-width ratio should be < 1.25)Wheelbase (mm)Not applicable05000TRUENANAFALSEis_protoyes10003500Wheel base should be > 1000 mmWidth (mm) [excluding mirrors]Not applicable05000TRUENANAFALSEis_protoyes1300Width should be < 1300 mmLength (mm)Not applicable05000TRUENANAFALSEis_protoyes3500Length should be < 3500 mmWeight of vehicle (kg)Not applicable01000TRUENANAFALSEis_protoyes140Vehicle weight should be < 140 kg45Vehicle dimensions - UrbanConcept.......Height (mm)Not applicable05000TRUENANAFALSEis_urbanyes10001300Height should be between 1000 & 1300 mmTrack width - front (mm)Not applicable05000TRUENANAFALSEis_urbanyes10001300Front track width should be > 1000 mmTrack width - rear (mm)Not applicable05000TRUENANAFALSEis_urbanyes8001300Rear track width should be > 800 mmWidth (mm) [excluding mirrors]Not applicable05000TRUENANAFALSEis_urbanyes12001300Width should be between 1200 & 1300 mmWheelbase (mm)Not applicable05000TRUENANAFALSEis_urbanyes12003500Wheel base should be > 1200 mmLength (mm)Not applicable05000TRUENANAFALSEis_urbanyes22003500Length should be between 2200 & 3500 mmDriver compartment height (mm)Not applicable01000TRUENANAFALSEis_urban8801300Driver compartment height should be > 880 mmDriver compartment width at shoulder (mm)Not applicable01000TRUENANAFALSEis_urban7001300Driver compartment width @ driver's shoulders should be > 700 mmGround clearance (mm)Not applicable0500TRUENANAFALSEis_urban1001300Ground clearance should be > 100 mmWeight of vehicle (kg)Not applicable05000TRUENANAFALSEis_urbanyes225Vehicle weight should be < 225 kg41/48Wheels and Axles.......yesAppropriate dimensions and fixing > Please fill in > TRUE0 > Within rangeyesWheels should be suitable for car and fixed securelyAre the wheels isolated from driver with a bulkhead? > Please fill in > TRUE0 > Within rangeyesWheels should be isolated from the driver by a bulkheadWheel rims diameter [UrbanConcept]Not applicable0500TRUENANAFALSEis_urban1517UrbanConcept wheel rims must be between 15-17 inchesDo wheels come in contact with other parts of vehicle? > Please fill in > TRUE0 > Within rangenoWheels should be isolated from all vehicle parts49Tyres - [UrbanConcept].......yesWidth of tyre (mm) [UrbanConcept]Not applicable0500TRUENANAFALSEis_urban80500Tyre width should be > 80 mmTyre thread depth (mm) [UrbanConcept]Not applicable050TRUENANAFALSEis_urban1.610Tyre thread depth should be > 1.6 mm42/47Vehicle handling and driver position.......yesSteering is precise (no excessive play) > Please fill in > TRUE0 > Within rangeyesSteering should be precise, with no excessive playTurning radius (m) > Please fill in060 > TRUE0 > Within rangeyes8Turning radius should be < 8 metresProper steering wheel [UrbanConcept]Not applicableTRUENANAFALSEis_urbanyesFor UrbanConcept cars a proper steering wheel must be used - no joysticks, tillers, bars, indirect, electric steeringSteering wheel diameter (cm) [UrbanConcept]Not applicable060TRUENANAFALSEis_urban25500Steering wheel diameter should be > 25 cm43/51Braking.......yes1 independent front system [Prototype]Not applicableTRUENANAFALSEis_protoyes1 independent front brake system required1 independent rear system [Prototype]Not applicableTRUENANAFALSEis_protoyes1 independent rear brake system requiredDisc or V-brake [Prototype]Not applicableTRUENANAFALSEis_protoyesDisc or V-brake system required4 disc hydraulic brake [UrbanConcept]Not applicableTRUENANAFALSEis_urbanyesFor UrbanConcept vehicles, 4 disc hydraulic brake (min 25 cm2 surface area) is required2 independent systems in "X" design or front / rear [UrbanConcept]Not applicableTRUENANAFALSEis_urbanyesFor UrbanConcept vehicles, 2 independent brake systems in "X" design or front / rear brake system is requiredBrake pedal size 5 x 5 cm [UrbanConcept]Not applicableTRUENANAFALSEis_urbanyesFor UrbanConcept vehicles, the brake pedal must be at least 5 x 5 cmHow many brake pedals are there? [UrbanConcept]Not applicable060TRUENANAFALSEis_urban11A single brake pedal is requiredErgonomic (able to activate with hands on steering) > Please fill in > TRUE0 > Within rangeyesBrake controls must be ergonomic (able to activate with hands on steering)Individual brake systems hold the car on a 20% incline? > Please fill in > TRUE0 > Within rangeyesEach individual brake systems must be able to hold the car on a 20% inclineDo you use electronic braking? > Please fill in > TRUE0 > Within rangenoElectronic braking is not allowedWet weather braking capability [UrbanConcept]Not applicableTRUENANAFALSEis_urbanyesFor UrbanConcept vehicles, wet weather braking capability is required46Vehicle body [UrbanConcept].......is_urbanyesCovers all mechanical parts, wheels & suspensionNot applicableTRUENANAFALSEis_urbanyesThe body must cover all mechanical parts, wheels & suspensionWings/fenders are integral part of bodyNot applicableTRUENANAFALSEis_urbanyesWings/fenders must be an integral part of bodyAre you using a commercial body?Not applicableTRUENANAFALSEis_urbannoA commercial body is not allowedAccess typical of production car (e.g. door)Not applicableTRUENANAFALSEis_urbanyesAccess must be typical of production car (door)Door opening is at least 500 x 800 mmNot applicableTRUENANAFALSEis_urbanyesThe door opening must be at least 500 x 800 mmOpening mechanism firmly attached (no adhesive tape)Not applicableTRUENANAFALSEis_urbanyesThe opening mechanism must be firmly attached (no adhesive tape allowed)Roof presentNot applicableTRUENANAFALSEis_urbanyesA roof must be presentWindscreen presentNot applicableTRUENANAFALSEis_urbanyesA windscreen must be presentEffective windscreen wiper(s) presentNot applicableTRUENANAFALSEis_urbanyesAn effective windscreen wiper(s) presentLuggage compartment 50x40x20 cm (L,H,W), accessibleNot applicableTRUENANAFALSEis_urbanyesAn accessible luggage space of 50x40x20 cm (L,H,W) is requiredLuggage compartment is strong enough to hold weight of ballastNot applicableTRUENANAFALSEis_urbanis_ballastyesThe luggage compartment must be strong enough to hold the weight of the ballast safelySuitcase like object providedNot applicableTRUENANAFALSEis_urbanyesA suitcase like object must be providedSuitcase type providedNot applicableTRUENANAFALSEis_urbanis_suitcaseERROR:#N/AA proper suitcase like object must be providedAre there any sharp edges inside or outside the car?Not applicableTRUENANAFALSEis_urbannoNo sharp edges allowedIs there a towing hook/ring capable of pulling vehicle weight?Not applicableTRUENANAFALSEis_urbanyesA towing hook/ring capable of pulling weight of vehicle is requiredIs the towing hook/ring placed fully under the body?Not applicableTRUENANAFALSEis_urbanis_towyesThe towing hook/ring must be placed fully under the body?Towing hook opening width (cm)Not applicable060TRUENANAFALSEis_urban3500The towing hook/ring must have a minumum diameter of 3 cm50Lighting [UrbanConcept].......is_urbanyes2 front headlightsNot applicableTRUENANAFALSEis_urbanyes2 front headlights required2 front turn indicatorsNot applicableTRUENANAFALSEis_urbanyes2 front turn indicators required2 amber rear turn indicatorsNot applicableTRUENANAFALSEis_urbanyes2 amber rear turn indicators required2 red rear brake lightsNot applicableTRUENANAFALSEis_urbanyes2 red rear brake lights required2 red rear lightsNot applicableTRUENANAFALSEis_urbanyes2 red rear lights required52Wet weather running [UrbanConcept].......is_urbanCapable of running in wet weatherNot applicableTRUENANAFALSEis_urbanyesUrbanConcept cars must be capable of running safely in wet weatherElectric windscreen wipers which give a clear viewNot applicableTRUENANAFALSEis_urbanyesUrbanConcept cars need electric windscreen wipers that work effectivelyWindscreen wipers easily operated by driver switchNot applicableTRUENANAFALSEis_urbanyesThe windscreen wiper must be operable by the driverProper ventilation to prevent fogging of windscreenNot applicableTRUENANAFALSEis_urbanyesThere should be proper ventilation to prevent fogging of the windscreenElectrical system suitable for wet weather conditionsNot applicableTRUENANAFALSEis_urbanyesThe electrical system must be suitable for wet weather conditionsWet weather braking capabilityNot applicableTRUENANAFALSEis_urbanyesFor UrbanConcept vehicles, wet weather braking capability is required57Vehicle electrical systems.......Electrical safety.......Maximum voltage at any point in electrical system > Please fill in0200 > TRUE0 > Within range060Maximum peak voltage in electrical circuits is 60 VMaximum nominal voltage at any point in electrical system > Please fill in0200 > TRUE0 > Within range048Maximum nominal voltage in electrical circuits is 48 VAll batteries & super capacitors short circuit protected? > Please fill in > TRUE0 > Within rangeyesAll batteries and super capacitors must be short circuit protected (with fuse, fusable link, circuit breaker)Short circuit protection on +ve terminal of battery/super cap > Please fill in > TRUE0 > Within rangeyesShort circuit protection devices must be located on the positive conductor and as close as possible to the battery itselfElectrical circuits protected against electrical overload? > Please fill in > TRUE0 > Within rangeyesAll electrical circuits must be protected against electrical overloadAll batteries & super capacitors outside driver compartment > Please fill in > TRUE0 > Within rangeyesAll batteries & super capacitors must be outside the driver compartmentSuper capacitor [H2 & hybrids].......Number of super capacitorsNot applicable0100TRUENANAFALSEis_supercap01Only 1 propulsion battery/ super capacitor is allowedSuper capacitor isolated from frame and accessory batteryNot applicableTRUENANAFALSEis_supercapno_propulsion_batteriesyesThe propulsion super capacitor must be electrically isolated from the vehicle frame and the accessory battery circuitAccessory Batteries.......Number of accessory batteries > Please fill in0100 > TRUE0 > Within range01Only 1 battery is allowedNumber of terminals on the batteriesNot applicable0100TRUENANAFALSEno_accessory_battery22Accessory battery must have only 2 terminals (+ and -)Used for compressors/blowers/engine cooling/motorsNot applicableTRUENANAFALSEno_accessory_batterynoThe battery cannot be used for compressors, blowers, engine cooling, motorsMaximum voltage of the battery (V)Not applicable0200TRUENANAFALSEno_accessory_battery060Maximum accessory battery voltage is 60 VAmp-hours of battery (Amp-hr)Not applicable0200TRUENANAFALSEis_ice_or_h20100Amp-hours of accessory battery are very high (accessories shouldn't consume so much power)Is it a lithium polymer battery?Not applicableTRUENANAFALSEno_accessory_batteryany - Is there a BMS that automatically isolates batteryNot applicableTRUENANAFALSEno_accessory_batteryis_lithiumyesLithium polymer batteries must have a BMS that AUTOMATICALLY isolates the battery - Is there a metal tray underneath the batteryNot applicableTRUENANAFALSEno_accessory_batteryis_lithiumyesLithium polymer batteries must have a metral tray underneath the batteryDoes the accessy battery have a negative ground?Not applicableTRUENANAFALSEno_accessory_batteryyes4BINTERNAL COMBUSTION.......60Other on-board energy.......Coolant system usedNot applicableTRUENANAFALSEis_iceERROR:#N/AOil is not allowed as an engine cooling mediumAre any auxiliary (additional) energy sources used?Not applicableTRUENANAFALSEis_icenoNo auxiliary (additional) energy sources are allowedElectric pump used for oil / water / fuel system?Not applicableTRUENANAFALSEis_icenoElectric pumps are not allowed for oil / water / fuel systemsElectrical energy used to drive the vehicle?Not applicableTRUENANAFALSEis_iceis_non_hybridnoElectrical energy cannot be used to propel the vehiclePneumatic energy used to drive the vehicle?Not applicableTRUENANAFALSEis_icenoPneumatic energy cannot be used to propel the vehicleAre additives/ hydrogen/ water/ catalysts added to the fuel?Not applicableTRUENANAFALSEis_icenoAdditives/ hydrogen/ water/ catalysts cannot be added to the fuel61Fuel tank.......Are you using a Shell fuel tank from e-shop?Not applicableTRUENANAFALSEis_liquidyesOnly the Shell fuel tank from e-shop is allowedNumber of fuel tanksNot applicable0600TRUENANAFALSEis_liquidyes11Only 1 fuel tank is allowedFuel tank capacity (ml)Not applicableTRUENANAFALSEis_liquidyesanyFuel delivery methodNot applicableTRUENANAFALSEis_liquidERROR:#N/AElectrical fuel pumps are not allowed - What is the safety valve pressure limit (bars)?Not applicable0600TRUENANAFALSEis_liquidpressurizedyes05The maximum safety valve pressure is 5 bars -What is the normal operating pressure (bars)?Not applicable0600TRUENANAFALSEis_liquidpressurizedyes05The maximum fuel pressure is 5 barsAre the fuel hoses compatible with the fuel?Not applicableTRUENANAFALSEis_liquidyesFuel hoses must be compatible with the fuelAre the fuel hoses translucent?Not applicableTRUENANAFALSEis_liquidyesFuel hoses should be translucentAre the fuel hoses rigid?Not applicableTRUENANAFALSEis_liquidpressurizedyesFuel hoses should be rigid in a pressurized system so that volume does not changeIs the top of fuel tank > 5 cm BELOW the roll bar?Not applicableTRUENANAFALSEis_liquidyesThe fuel tank should be > 5 cm below the roll barIs the fuel tank vertical?Not applicableTRUENANAFALSEis_liquidyesFuel tank should be verticalIs the fuel tank accessible to a 1 metre long vertical burette?Not applicableTRUENANAFALSEis_liquidyesFuel tank should be accessible with a buretteIs there a fuel return line?Not applicableTRUENANAFALSEis_liquidany - Is the fuel return line returning below the fuel tank?Not applicableTRUENANAFALSEis_liquidfuel_returnyesFuel must return to the fuel line below the fuel tank62Fuel system.......Fuel filter present?Not applicableTRUENANAFALSEis_liquidnoFuel filters are not allowedSolenoid valve presentNot applicableTRUENANAFALSEis_liquidis_dieselERROR:#N/ASolenoid valves are not allowed (except for diesel engines)Float chamberNot applicableTRUENANAFALSEis_liquidyesanyCarburetorNot applicableTRUENANAFALSEis_liquidyesanyFuel injection systemNot applicableTRUENANAFALSEis_liquidyesanyIs there any fuel in the air intake system?Not applicableTRUENANAFALSEis_liquidnoThere should be no fuel in the air intake systemIs there recyling of blowby gas?Not applicableTRUENANAFALSEis_liquidnoRecycling of blowby gas is not allowed64Hybrids.......is_iceno -What kind of hybrid is it (parallel/series)Not applicableTRUENANAFALSEis_iceis_hybridyesany - Is the generated energy stored in a super capacitor?Not applicableTRUENANAFALSEis_iceis_hybridyesAll energy generated in hybrid vehicles must be stored in a supercapacitor only (batteries are not allowed) - External connectors for measuring super cap voltage?Not applicableTRUENANAFALSEis_hybridis_supercapacitor_iceyesThere should be connectors outside the vehicle to enable a check of super capacitor voltage - Have you added a drawing of how the hybrid system works?Not applicableTRUENANAFALSEis_iceis_hybridyesSchematic of the hybrid system not provided64Starter.......is_icenoDo you use an electric starter motor?Not applicableTRUENANAFALSEis_iceanyCan the starter propel the vehicle forward?Not applicableTRUENANAFALSEis_icestarternoThe starter motor should not be able to propel the vehicle - a suitable interlock should be installed to prevent thisIs a red starter light connected to the starter motor included?Not applicableTRUENANAFALSEis_icestarteryesA red starter light must be installed to indicate operation of the starter motorDoes the starter light turn on when electrical starter motor runs?Not applicableTRUENANAFALSEis_icestarteryesThe starter light must turn on when the starter motor is operatingDoes the starter light turn on whenever the engine runs?Not applicableTRUENANAFALSEis_icestarternoThe starter light should only turn on when the electrical starter motor is operating. It is not meant to indicate operation of the internal combustion engineIs the luminescence equivalent to a 21 W light bulb?Not applicableTRUENANAFALSEis_icestarteryesThe starter light must be as bright as a 21 W light bulbIs this shown in your electrical circuit diagram?Not applicableTRUENANAFALSEis_icestarteryesPlease show the starter light in the electrical circuit diagram65Hydrogen.......5 cm ventilation hole at highest point of engine compartment?Not applicableTRUENANAFALSEis_hydrogenyesA 5 cm ventilation hole at highest point of engine compartment is required5 cm ventilation hole at highest point of driver compartment?Not applicableTRUENANAFALSEis_hydrogenyesA 5 cm ventilation hole at highest point of driver compartment is requiredHydrogen flowmeter visible from outsideNot applicableTRUENANAFALSEis_hydrogenyesHydrogen flowmeter should be visible from outsideFlowmeter pressure same as fuel cell pressureNot applicableTRUENANAFALSEis_hydrogenyesFlowmeter pressure same as fuel cell pressureHow many hydrogen cylinders are you using?Not applicable010TRUENANAFALSEis_hydrogen11Only one hydrogen cylinder is allowedDo you use oxygen or compressed air reserves?Not applicableTRUENANAFALSEis_hydrogennoOxygen or compressed air is not allowed for the fuel cellWhat is your fuel system pressure (bars absolute)?Not applicable010TRUENANAFALSEis_hydrogenanyWhat kind of piping are you using?Not applicableTRUENANAFALSEis_hydrogenERROR:#N/ASteel piping is required if > 1.5 bar absolute, PFTE is OK if < 1.5 bar absolute. PTFE (Teflon) piping is recommended if < 1.5 bar absoluteAre you using teflon tape or equivalent to seal connections?Not applicableTRUENANAFALSEis_hydrogennoTeflon tape is not allowed for sealing as it can damage the flow meterIs system: Tank > regulator > solenoid valve > flow meter > FCNot applicableTRUENANAFALSEis_hydrogenyesH2 system should be : Tank > regulator > solenoid valve > flow meter > FCIs the solenoid shutdown valve normally opened?Not applicableTRUENANAFALSEis_hydrogennoThe H2 solenoid shutdown valve must be normally closed (when power is off)Is there a purge pipe for hydrogen?Not applicableTRUENANAFALSEis_hydrogenanyPurge pipe exits outside vehicle?Not applicableTRUENANAFALSEis_hydrogenpurgeyesPurge pipe should exit outside the vehicleH sensor (1% H) near engine compartment ventilation hole?Not applicableTRUENANAFALSEis_hydrogenyesH sensor (1% H) is needed near engine compartment ventilation holeDoes shutdown system shut both solenoid valve & motor?Not applicableTRUENANAFALSEis_hydrogenyesH2 Emergency shutdown system should shut both solenoid valve & stop motorShut down activated in 3 ways: H sensor, driver, external?Not applicableTRUENANAFALSEis_hydrogenyesH2 shutdown system must be capable of being activated in either of 3 ways: H sensor, driver, externalAre there any leaks from the hydrogen system?Not applicableTRUENANAFALSEis_hydrogennoNo hydrogen leaks allowed - please check for leaks with a hydrogen sensorElectrical system.......Electrical energy stored before driving motor?Not applicableTRUENANAFALSEis_hydrogenyesanySuper capacitor used to store electricity produced by the FC?Not applicableTRUENANAFALSEis_hydrogenFC_directyesIf fuel cell energy is stored, it must be stored in a supercapacitor, NOT a batteryElectrical/electronic casings are transparentNot applicableTRUENANAFALSEis_hydrogenyesAll electrical/electronic casings should be transparentAccessory battery.......Accessory bat. used for compressors, pumps, fuel cell cooling?Not applicableTRUENANAFALSEis_hydrogennoThe accessory battery should not be used for compressors, pumps or fuel cell cooling - these must be powered by the fuel cellAccessory battery used to start the fuel cell?Not applicableTRUENANAFALSEis_hydrogennoThe accessory battery cannot be used to start the fuel cellExternal battery.......External battery used to start the vehicle?Not applicableTRUENANAFALSEis_hydrogenyesany - What is the voltage?Not applicable02000TRUENANAFALSEis_hydrogenexternal_battery060Maximum voltage of the external battery is 60 V - What is the power rating (Amp-hours)?Not applicable02000TRUENANAFALSEis_hydrogenexternal_battery0100Starting a fuel cell shouldn't consume so much power - Why is this ncessary? - Are there connectors outside the vehicle?Not applicableTRUENANAFALSEis_hydrogenexternal_batteryyesThere should be connectors outside the vehicle for connecting the external startup batterySupercapacitor:.......is_hydrogen - What is the maximum voltage? (Volts)Not applicable02000TRUENANAFALSEis_hydrogenis_H2supercapyes060Maximum voltage of the super capacitor is 60 V - What is the power rating (Watts)?Not applicable02000TRUENANAFALSEis_hydrogenis_H2supercapany - What is the capacitance (Farads)?Not applicable02000TRUENANAFALSEis_hydrogenis_H2supercapyesany - Number of terminals on the supercapacitorNot applicable0100TRUENANAFALSEis_hydrogenis_H2supercap22The super capacitor must have only 2 terminals (+ and -) - Fuse on supercapacitor +ve (Amps)Not applicable02000TRUENANAERROR:#DIV/0!is_hydrogenis_H2supercapyes0ERROR:#DIV/0!ERROR:#DIV/0! - Are there connectors outside the car for voltage measurement?Not applicableTRUENANAFALSEis_hydrogenis_H2supercapyesThere should be connectors outside the vehicle to enable a check of super capacitor voltage - Super capacitor isolated from frame and accessory batteryNot applicableTRUENANAFALSEis_hydrogenis_H2supercapyesThe super capacitor must be electrically isolated from the vehicle frame and the accessory battery circuitFuel cell (FC).......is_hydrogenyesNumber of cellsNot applicable02000TRUENANAFALSEis_hydrogenyesanyActive area of ONE cell (cm )Not applicable02000TRUENANAFALSEis_hydrogenyesanyBrand and model of fuel cellNot applicableTRUENANAFALSEis_hydrogenyesanyFuse on fuel cell +ve terminalNot applicableTRUENANAFALSEis_hydrogenyesA fuse is required on the +ve terminal of the fuel cellFuse rating (Amps)Not applicable02000TRUENANAFALSEis_hydrogenyes0The fuse on the fuel cell should be < 0.0 Amps, which is equivalent numerically to surface area of one cellFuel cell isolated from frame and accessory batteryNot applicableTRUENANAFALSEis_hydrogenyesThe fuel cell must be electrically isolated from the vehicle frame and the accessory battery circuit67Battery electric.......1 labelled Joulemeter (for motor)Not applicableTRUENANAFALSEis_batteryyes1 labelled Joulemeter must be installed (between battery & motor)Joulemeter inaccessible to driverNot applicableTRUENANAFALSEis_batteryyesThe battery joulemeter must be inaccessible to the driverJoulemeter can be read without removing cover of vehicleNot applicableTRUENANAFALSEis_batteryyesThe battery joulemeter must be able to be read EASILY from outside the vehicle, without removing the cover of the vehiclePropulsion battery.......is_batteryPropulsion battery voltage (V) - nominalNot applicable01000TRUENANAFALSEis_batteryyes48The nominal propulsion battery voltage should be < 48 VoltsPropulsion battery voltage (V) - maxNot applicable01000TRUENANAFALSEis_batteryyes60The max propulsion battery voltage should be < 60 VoltsNumber of terminals on the batteriesNot applicable0100TRUENANAFALSEis_battery22Propulsion battery must have only 2 terminals (+ and -)Is it a lithium polymer battery?Not applicableTRUENANAFALSEis_batteryyesOnly lithium polymer batteries are allowed - Is there a BMS that automatically isolates batteryNot applicableTRUENANAFALSEis_batteryyesLithium polymer batteries must have a BMS that AUTOMATICALLY isolates the battery - Does the BMS do cell balancing during charging?Not applicableTRUENANAFALSEis_batteryyesLithium polymer batteries must do cell balancing during charging - Maximum cell level voltage cut-off during charging (Volts)Not applicableTRUENANAFALSEis_batteryyes0.11000Lithium polymer batteries must have a maximum cell level cut-off voltage during charging - Minimum celll level voltage cut-off during discharge (Volts)Not applicableTRUENANAFALSEis_batteryyes0.11000Lithium polymer batteries must have a minimum cell level cut-off voltage during discharge - Maximum discharge current (Amps)?Not applicableTRUENANAFALSEis_batteryyes0.11000Lithium polymer batteries must have a maximum discharge current cut-off during discharge - Maximum battery temperature cut-off limit (C)Not applicableTRUENANAFALSEis_batteryyes0.1100Lithium polymer batteries must have a maximum temperature cut-off limit - Do you know where is the temperature measurement taken?Not applicableTRUENANAFALSEis_batteryyesPlease ensure that you know where the temperature measurement is made - Do you have printed documentation for the BMS data above?Not applicableTRUENANAFALSEis_batteryyesPlease ensure that you have printed data from the suppliers on all BMS data requested - Do you have a battery bag or fire blanket for battery charging?Not applicableTRUENANAFALSEis_batteryyesPlease ensure that you have a battery bag or fire blanket to use during battery chargingWatt -hours of battery (W-hr) - battery electric vehicles onlyNot applicable020000TRUENANAFALSEis_battery01000Watt-hours of propulsion battery must not exceed 1000 W-hrBattery circuit isolated from frameNot applicableTRUENANAFALSEis_batteryyesThe propulsion battery circuit must be isolated from the frameHow will you ship the battery to the event?Not applicableTRUENANAFALSEis_batteryERROR:#N/ABatteries need to be shipped separately from the car 2 months before event (except for local teams who can have it in their cars)Motor.......is_batteryHow many motors do you haveNot applicable1100TRUENANAFALSEis_battery2The maximum number of propulsion motors allowed is 2Is the motor a 2 wire motor or 3 wire motorNot applicable23TRUENANAFALSEis_batteryany23Propulsion battery must have only 2 terminals (+ and -)Type of motor controllerNot applicableTRUENANAFALSEis_batteryERROR:#N/AMotor controllers must be custom designed for SEM (kits or ready made controllers are not allowed) - Does the PCB have the word "SEM" etched into it ?Not applicableTRUENANAFALSEis_batteryyesThe PCB must have the word "SEM" etched into it - Do you have the schematic of the PCB ?Not applicableTRUENANAFALSEis_batteryyesPlease ensure that you have the scematic layout of the PCBSolar panel.......Is a solar panel used to supplement the propulsion battery?Not applicableTRUENANAFALSEis_batterynoSolar panels are no longer allowed in the Battery Electric energy group68CNG.......5 cm ventilation hole at highest point of engine compartment?Not applicableTRUENANAFALSEis_CNGyesA 5 cm ventilation hole at highest point of engine compartment is required5 cm ventilation hole at highest point of driver compartment?Not applicableTRUENANAFALSEis_CNGyesA 5 cm ventilation hole at highest point of driver compartment is requiredWhat is the maxmum temperature of the CNG cylinder (C)Not applicable0100TRUENANAFALSEis_CNG050The maximum allowable temperature is 50 CWhat is your CNG system pressure (bars absolute)?Not applicable0100TRUENANAFALSEis_CNG03The maximum allowable pressure is 3 barsDo you have certification that the hoses are suitable for CH4?Not applicableTRUENANAFALSEis_CNGyesAll hoses must be suitable for methane use and certification must be shown as proofMinimum rated pressure of the hoses/connectors (bars)Not applicable0100TRUENANAFALSEis_CNG91000The minimum rated rated hose pressure is 9 barsIs system: Tank > regulator assembly > hose > injectorNot applicableTRUENANAFALSEis_CNGyesMethane system should be : Tank > regulator > solenoid valve > flow meter > FCIs the entire fuel system removable for weighing?Not applicableTRUENANAFALSEis_CNGyesThe entire fuel system must be removable for weighingIs the solenoid shutdown valve normally opened?Not applicableTRUENANAFALSEis_CNGnoThe methane solenoid shutdown valve must be normally closed (when power is off)Is there a safety valve, which discharges outside the vehicle?Not applicableTRUENANAFALSEis_CNGyesA CNG safety valve that vents outside the vehicle is requiredCH4 sensor (1% ) near engine compartment ventilation hole?Not applicableTRUENANAFALSEis_CNGyesMethane sensor (1% methane) is needed near engine compartment ventilation hole - Sensor has a manual reset in engine compartment?Not applicableTRUENANAFALSEis_CNGis_cng_sensoryesThe methane sensor must have a manual reset in the engine compartmentDoes shutdown system shut both solenoid valve & engine?Not applicableTRUENANAFALSEis_CNGyesEmergency shutdown system should shut both solenoid valve & stop motorShut down activated in 3 ways: CH4 sensor, driver, external?Not applicableTRUENANAFALSEis_CNGyesShutdown system must be capable of being activated in either of 3 ways: methane sensor, driver, externalAre there any leaks from the CNG system?Not applicableTRUENANAFALSEis_CNGnoNo methane leaks allowed - please check for leaks with a methane sensor58 cDocumentation to be brought to event (in bound book).......i) ii)Energy supply diagram (tank to engine/motor) > Please fill in > TRUE0 > Within rangeyesA printed copy of the Energy supply diagram (tank to engine/motor) must be brought to the eventPropulsion system diagram (engine/motor to wheels) > Please fill in > TRUE0 > Within rangeyesA printed copy of the Propulsion system diagram (engine/motor to wheels) must be brought to the eventElectrical schematic > Please fill in > TRUE0 > Within rangeyesA printed copy of the Electrical schematic must be brought to the eventHybrid system diagramNot applicableTRUENANAFALSEis_hybridyesA printed copy of the Hybrid system diagram must be brought to the eventMotor controller and sub-component schematicNot applicableTRUENANAFALSEis_batteryyesA printed copy of the Motor controller and sub-component schematics must be brought to the eventMotor controller flowchartNot applicableTRUENANAFALSEis_batteryyesA printed copy of the Motor controller flowchart must be brought to the eventBMS information (including cut-off limits)Not applicableTRUENANAFALSEis_batteryyesA printed copy of the BMS information (including cut-off limits) must be brought to the eventBattery and battery charger informationNot applicableTRUENANAFALSEis_batteryyesA printed copy of the Battery and battery charger information must be brought to the eventSoftware code and documentation for the motor controllerNot applicableTRUENANAFALSEis_batteryyesA printed copy of the Software code and documentation for the motor controller must be brought to the eventFlowchart for motor controllerNot applicableTRUENANAFALSEis_batteryyesA printed copy of the Flowchart for the motor controller programming must be brought to the eventPCB schematic layoutNot applicableTRUENANAFALSEis_batteryis_pcbyesA printed copy of the PCB schematic layout must be brought to the eventSuper capacitor informationNot applicableTRUENANAFALSEis_supercapyesA printed copy of the Super capacitor information must be brought to the eventFuel cell information (including surface area/cell)Not applicableTRUENANAFALSEis_hydrogenyesA printed copy of the fuel cell information (including the surface area per cell) must be brought to the event

ID numberID number0TeamTeamEnter team name belowVehicle typeVehicle type0Energy typeEnergy type0Battery shippingBattery shippingNAMotor controllerMotor controllerNACar historyCar historyERROR:#N/ANew carNew carnoCar statusCar statusERROR:#N/AWeightWeight0%Funding %Funding %0Answers requiredAnswers required84In CurriculumIn Curriculum0Missing dataMissing data84Incorrect answersIncorrect answers0Correct answersCorrect answers084ScoreScore0.0%Input statusInput statusIncompleteComplianceComplianceFailresult_summary

StatusTop of pageRules 2016email usRegistration

c

fuelsSolenoid valveClassUnitsfuelsyspure_elecice_or_h2GasolineNoInternal combustionkm/lyesnoyesDieselYesInternal combustionkm/lyesnoyesCNGYesInternal combustionkm/lyesnoyesGTLYesInternal combustionkm/lyesnoyesEthanolNoInternal combustionkm/lyesnoyesHydrogenNoE-Mobilitykm/kWhyesnoyesBatteryNoE-Mobilitykm/kWhnoyesnoSolarNoE-Mobilitykm/kWhnononoLPGNoInternal combustionkm/lyesnonosolenoid_answerERROR:#N/Aenergy_classERROR:#N/Afuelsys_neededERROR:#N/Aprevious_energy_classERROR:#REF!previous_energy_limitERROR:#REF!Ballast_optionsCorrect answerBottle(s) of water or other liquidNot allowedToolsNot allowedRunning weightsRunning weightsBag of small items (e.g. rice)Not allowedDiving weightsDiving weightsBallast_acceptableERROR:#N/AHelmet_optionsBicycle helmetNot allowedMotorcycle helmet (3/4) with gogglesNot allowedMotorcycle helmet (3/4) with half face shield (below eye)Not allowedMotorcycle helmet (3/4) with full face shield (to chin)Motorcycle helmet (3/4) with full face shield (to chin)Full face motorcyle helmetFull face motorcyle helmetArmy hatNot allowedHard hatNot allowedHelmet acceptableERROR:#N/AyesnoyesnovtypePrototypeUrbanConceptSEMeventsAmericasEuropeAsiatank_size30 ml100 ml250 ml350 mlFuel_deliveryCorrect answerGravity fedGravity fedPressurized airPressurized airMechanical pumpMechanical pumpElectrical pumpNot alloweddelivery_methodERROR:#N/Apressurizednoh2_pipingCorrect answerSteelSteelPTFE (Teflon)PTFE (Teflon)Polyurethane (PU)Not allowedOther materialNot allowedh2_pipeERROR:#N/AcoolantWaterWaterAirAirOilNot allowedcoolant_answercoolant_methodERROR:#N/AMotor controllerCorrect answerMotor controller that came with motorNot allowedMotor controller purchased separately from motorNot allowedModified a purchased motor controllerNot allowedDesigned own PCB and did own programmingDesigned own PCB and did own programmingProgrammed a purchased motor controller evaluation kitNot allowedBuilt from subcomponentsBuilt from subcomponentsmotor_controller_answersmotor_controllerERROR:#N/Ais_pcbERROR:#N/AhybridParallelSeriesTop team limitE-mobility500Internal combustion1000is_protonois_urbannois_solarnois_hydrogennois_CNGnois_batterynois_hybridnois_icenois_gasnois_liquidnois_dieselyesis_emobilitynois_pure_elecnois_manualyesis_electric_motornois_supercapnois_ice_or_h2nono_accessory_batterynono_propulsion_batteriesnois_non_hybridyesis_newcarnoDevelopment levelRatingdevelopment_statusSketch only1Technical drawing with dimensions2Partially built5Completely built (or modifications completed)7Short road test with complete (or modified) car8Race distance test with complete (or modified) car10development_status_answersHistory levelOld or NewRatingcar_historyNew car built from scratchNew1Previous car at SEM event (no change)Old2Modification of previous car from SEM eventOld3car_history_answerscar_historybattery_shipmentNo shipping required as we are a local teamNo shipping required as we are a local teamShipping OKShip together with the carNot OKProblemBuy a battery on arrivalNot OKProblemShip separately from the car a few weeks before eventNot OKProblemShip separately from the car 2 months before eventShip separately from the car 2 months before eventShipping OKbattery_shipmentERROR:#N/Asuitcase_typesSuitcase typeAnswerNo suitcaseNot allowedRucksackNot allowedBackpackNot allowedCardboard box < 20 x 40 x 50 cmCardboard box < 20 x 40 x 50 cmProper solid suitcaseProper solid suitcasesuitcase_typeERROR:#N/A

main

dData variablesdata > dash.NNnaNot applicablereqPlease fill infilledpicturePicture added?

menu