Co

nst

ruct

ion

Det

ails

Back:

1. Attach center back pieces together. 2. Attach binding with 301 lockstitch topstitch about ¼ inch away from edge. Serge the raw edges on the

inside of the garment. 3. Complete center back darks 4. Attach back yoke.

Sleeves:

1. Sew sleeve sides together. 2. Serge raw edges. 3. Attach binding on opening of sleeve. 4. Baste end of sleeve, gather edges to fit the length of the cuff. 5. Sew the outer edges of the cuff, then turn inside out. Attach the cuff to sleeve (tucking in the raw edge. 6. Top stitch cuff 7. Complete 2 buttonholes, Attach buttons.

Front:

1. Complete darts in front side bodice. 2. Attach front side bodices to back bodices (at side and top seams). 3. At top seam, finish raw edges with ssq seam. 4. Attach sleeve into place. 5. Serge raw edges. 6. Attach button side facing piece on so that it is folded in half. On bottom layer, complete all button holes.

(5). 7. Fold left side of the front bodice in 1 inch. Tuck in raw edges and sew over seam. 8. Attach 5 buttons. 9. On the left side of inside of the front bodice, attach style number tab by serging into the edge. 10. Hem using the Efb seam.

Collar:

1. Sew the collar right sides together, leaving open the bottom of the collar. Turn inside out. 2. Do the same for the collar band, but leave the top of the band open. 3. Attach the band and the collar together, tucking in raw edges. 4. Topstitch using the 301 lockstitch, around the whole piece. 5. Attach the collar band to the shirt, while inserting the folded tags; the care tag and the brand label. 6. On the edge of the right side of the collar band, make 2 buttonholes. 7. Attach special buttons on the left side of the edge of the collar band.

Ruffle:

1. Take ruffle piece, and baste down the middle. 2. Pull then ends of the basting, making the ruffle piece into 1.5 feet.

3. Attach the ruffle piece to the top layer of the button side facing piece, sew down the middle of ruffle

attaching it in place.

Construction Details

Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse

Style Ref HMLP1 Sizes xs-xl Collection Number 2

Supplier Vendor Name Tech Pack Sent 10/31/2016

Packing & Labels

Item Code Description Quantity Details

LAB-1 Brand Logo tag 1/GARMENT See tech pack for placement.

LAB-2 Size tag 1/GARMENT See tech pack for placement.

LAB-3 Style Number tag 1/GARMENT See tech pack for placement.

TAG-1 Hang tag w/ garment description 1/GARMENT Pin w/ TAG-2 at sleeve cuff

TAG-2 Hang tag w/ logo 1/GARMENT Pin w/ TAG-1 at sleeve cuff

BG-1 Poly bag 1/GARMENT Vendor determines size

PPR-3 Tissue paper 1/GARMENT Folded w/ garment

Construction Details

Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse

Style Ref HMLP1 Sizes xs-xl Collection Number 2

Supplier Vendor Name Tech Pack Sent 10/31/2016

Pac

kin

g &

Lab

els

LAB-1, LAB-2, LAB-3 attach with ground color thread.

TAG-1, TAG-2 attach with clear plastic tagging fastener (3” long).

Poly bag size determined by garment size (xs,s,m,l,xl). Garment must fit

securely in bag.

Construction Details

Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse

Style Ref HMLP1 Sizes xs-xl Collection Number 2

Supplier Vendor Name Tech Pack Sent 10/31/2016

Swatch Location Fabric Code Type Color Direction

Whole Garment

M4IC2

Woven

Red Wine

Non-directional

Item Type Item Code Location Dimensions Quantity Color Swatch

Button

B77093

Cuffs,

Neckline

1/8”

diameter

6

(2 on

each)

Gunmetal

Button

B76820

Center

front

1/4”

diameter

12

Black

Fab

rics

& T

rim

s

Design

Season Fall 2016 Item Number 80006 Style Name Ruffle Front Blouse

Style Ref HMLP1 Sizes xs-xl Collection Number 2

Supplier Vendor Name Tech Pack Sent 10/31/2016

Des

ign

Brand Logo tag

Size tag

Fold Brand Logo tag in half along the shorter

edge and sew into neck seam. Fold size tag

along longer edge and sew into neck seam.

Both should be sewn below the collar band.

Fold style # tag in half along longer edge. Sew

into side seam.

Style Number tag