TeeJet Three-way Valve for Foamers - Heartland Agheartlandagequipment.com/wp-content/uploads/2013/10/Section-G.pdf · 44103247 1/2” x 3/8” $4.26 ... Tube Elbow Barb Connector

Bray Butterfly Valves w/ Double-action Air Actuators- are used on self-propelled liquid applicators and in automated liquid handling systems. Features include: A cast iron body with a stainless steel stem and disc; EPDM seat; Alignment holes to help center valve installation.

Part Number Size Description Price 518337 1” 1” Valve w/ Actuator $284.87 2392207 2” 2” Valve w/ Actuator $257.14 2392213 3” 3” Valve w/ Actuator $273.33 518486 1” 1” Valve only (Replacement) $75.43 714002 1” Seat Replacement for 518337 $12.43 714000 1”/2” Repair kit/ Air Actuator (2393118) $12.93 715417 1” Steel Bushing kit (for 1” valve stem only) $17.83 2392207-1 2” 2” Valve only (Replacement) $99.16 2393118 1”/2” Air Actuator only (fits 1” or 2” valve) $174.86 BN2392210 4” Air Actuator for 4” Bray Valve (B1 adapter is

required) $246.94

B1 4” Adapter Kit for 4” Valve with Actuator $17.83

Bray Butterfly Valves w/ Handle- are used on self-propelled liquid applica-tors and in bulk liquid handling plants. Features include: Stainless steel stem and disc; EPDM seat; Handle with spring-loaded lever and 10 position lock plate; Alignment holes to center valve installation.

Part Number Size Description Price 2392207-1 2” 2” Valve w/ handle & lock plate $99.16 2392208 3” 3” Valve w/ handle & lock plate $122.63 2392209 4” 4” Valve w/ handle & lock plate $139.26

DEMA Electric Solenoid Valves Part Number Description Price 2392269 1/2” NPT Valve A-414P $87.63 94066 3/4” NPT Valve A-416P $116.37

Brass Construction-Used on Foamers

TeeJet Three-way Valve for Foamers

144F-1-3 DirectoValve solenoid operated valve used on many foam marking systems including those on Patriots. 3/4” FPT inlet- 1/2” FPT outlets. 12-volt DC coil.

Part No._63912_______Price: $89.93

AMES, IA: 1-800-779-7979 340 MARSHALL, MO: 1-800-889-6161

Part Number Tube x MPT Price44103220 1/4” x 1/8” $1.5444103206 1/4” x 1/4” $1.3744103221 1/4” x 3/8” $1.7944103222 5/16” x 1/4” $2.1644103223 5/16” x 3/8” $2.3944103224 3/8” x 1/4” $2.0644103207 3/8” x 3/8” $2.4444103225 3/8” x 1/2” $2.6144103226 1/2” x 3/8” $3.4644103227 1/2” x 1/2” $2.91

Male ConnectorPart Number Stem x HB Price

44103255 1/4” x 1/4” $1.1944103256 1/4” x 5/16” $1.1944103257 5/16” x 1/4” $1.3644103258 5/16” x 5/16” $1.3644103259 5/16” x 3/8” $1.7144103260 3/8” x 1/4” $1.5444103261 3/8” x 3/8” $1.6744103262 3/8” x 1/2” $2.4344103263 1/2” x 3/8” $2.1044103264 1/2” x 1/2” $2.46

Tube Barb Connector

Part Number Tube x Tube Price44103200 1/4” x 1/4” $2.0944103234 5/16” x 1/4” $2.6444103235 5/16” x 5/16” $2.6644103236 3/8” x 1/4” $2.8044103201 3/8” x 3/8” $2.9044103237 1/2” x 3/8” $3.9944103238 1/2” x 1/2” $3.93

Part Number Tube x FPT-SW Price44103239 1/4” x 1/8” $2.2344103240 1/4” x 1/4” $2.7044103241 5/16” x 1/8” $2.4044103242 5/16” x 1/4” $2.4644103243 3/8” x 1/8” $2.6444103244 3/8” x 1/4” $3.10

Elbow Union Female Adapter

Part Number Tube x MPT Price44103210 1/4” x 1/8” $1.6644103211 1/4” x 1/4” $1.9744103295 1/4” x 3/8” $2.0744103228 5/16” x 1/4” $2.2944103229 5/16” x 3/8” $2.1644103230 3/8” x 1/4” $2.7044103231 3/8” x 3/8” $3.0744103232 1/2” x 3/8” $2.9144103233 1/2” x 1/2” $3.04

Part Number Tube In x Tube Out

Price

44103276 1/4” x 1/4” $2.9744103277 5/16” x 5/16” $2.9744103279 3/8” x 3/8” $3.2644103281 1/2” x 1/2” $3.70

Male ElbowTwo-Way Divider

Part Number Run O.D x Stem O.D

Price

44103208 1/4” x 1/4” $2.4644103245 5/16” x 5/16” $2.7344103246 3/8” x 1/4” $3.0644103209 3/8” x 3/8” $3.0344103247 1/2” x 3/8” $4.2644103248 1/2” x 1/2” $4.27

Part Number Tube O.D. Price44103272 1/4” $5.7644103273 5/16” $5.7644103274 3/8” $5.7644103275 1/2” $5.76

Tee Union Cross

Part Number Stem x MPT Price44103204 1/4” x 1/8” $.7744103212 1/4” x 1/4” $.7944103213 5/16” x 1/4” $.7744103214 5/16” x 3/8” $.8944103215 3/8” x 1/4” $.9044103205 3/8” x 3/8” $1.0744103216 1/2” x 3/8” $1.6744103217 1/2” x 1/2” $1.64

Stem AdapterPart Number Tube x Tube Price

44103202 1/4” x 1/4” $1.6944103265 5/16” x 1/4” $2.2644103266 5/16” x 5/16” $2.4944103267 3/8” x 1/4” $2.3144103268 3/8” x 5/16” $3.0444103203 3/8” x 3/8” $2.4344103270 1/2” x 3/8” $3.3944103271 1/2” x 1/2” $3.56

Union Connector

Part Number Stem x HB Price44103249 1/4” x 1/4” $1.6444103250 1/4” x 5/16” $1.8344103251 5/16” x 1/4” $1.6744103252 5/16” x 5/16” $1.9044103253 3/8” x 1/4” $1.9744103254 3/8” x 5/16” $2.30

Part Number Tube O.D. Price

44103282 1/4” $1.5644103283 5/16” $1.2144103284 3/8” $1.3444103285 1/2” $1.19

Tube Elbow Barb ConnectorTube End Stop

QUICK FIT COUPLERS


Part Number Description Price/ft15018882 Black 1/4” $.202393051 Red 1/4” $.112393052 Yellow 1/4” $.112393053 Green 1/4” $.112393054 Blue 1/4” $.11

15018885 Black 5/16” $.3615018887 Black 3/8” $.3015018893 Black 1/2” $.47

Poly TubingStandard Rolls are in 100’ Rolls. 500’ and 1000’ Reels are Available for Your Large Projects. Call for Pricing.

Part Number Description Price

44103218 Cutter $14.1144103219 Replacement Blades

(pack of 5 blades)$30.61

Tubing Cutter Control Valve w/Union Connector


44103286 1/4” Flow Regulator $14.0644103287 3/8” Flow Regulator $18.70

Adjustable collar locks when pushed back in.

Part Number Description Price44103288 1/4” Hand Valve $11.1144103289 3/8” Hand Valve $8.0644103290 1/2” Hand Valve $12.51

Hand Valve w/Union Connector


44103291 1/4” Check Valve $17.0344103292 5/16” Check Valve $16.7644103293 3/8” Check Valve $21.1044103294 1/2” Check Valve $20.80

Check Valve

Chromed Airline Coupler Set (Bulkhead Style)


2295091 1/4” Coupler Set $36.25 2295092 3/8” Coupler Set $33.05


NS-NZ6-10 Air Regulator, 1/8” FPT w/ gauge port and locking knob.

$52.63

NS-NZ6-09 0-100 PSI Gauge, 1/8” MPT, Port to rear, can be mounted directly to regulator or in panel with 1-5/8” hole.

$36.85

Air Regulator


Air Valves, Regulators & Gauges

Replacement parts for Richway Nozzle Stop systems

Part Number Description Price NS-NZ6-10 Pressure Regulator $52.63 NS-NZ6-09 Pressure Gauge, 0-100 PSI $36.85 NS-NZ7-05 Master Switch Air Toggle (MJTV-4) $65.65 NS-NZ7-02 Boom Switch Air Toggle (MJTV-3) $40.97

Clippard Switch used on Mertz & Big A Floaters.

Part Number Description Price 2402090 Air Toggle Boom Switch

(MJTV-5) $75.25

Push-Pull Air Switch used for Mertz boom valves.

Part Number Description Price 2298260 5 Port Valve/Switch $110.94

Air Toggle Switch used on Mertz & Titan for 2-speed axle & boom on/off on older Mertz.

Part Number Description Price 2292202 Air Toggle Switch $127.00

Air Toggle Switch used on Titan for air stabiliz-ers & foamer on/off. Has FPT exhaust port.

Part Number Description Price 2402092 Air Toggle Switch $82.82

Air Toggle Switch used on Titan & FLX models for foamer on/off. Chromed toggle. Exhaust port is not tapped.

Part Number Decription Price 2402091 Air Toggle Switch $67.85

FIG. A

FIG. BGauge Only

FIG. C

Air Regulator used on Mertz, Titan and FLX foamer systems. Mounts in panel with 1-3/16” hole. Locking adjustment knob. Pressure gauge port.

Part Num-ber

REF. Description Price

87388151 FIG. A Air Regulator w/ 1/8” gauge port. $36.25 87388327 FIG. A Retainer Nut for 87388151 $5.30 2296768 FIG. C Pressure Gauge, 0-60 PSI, Panel mount-

ing. Used on Mertz, Titan & FLX foamer. $37.59

BN27363 FIG. B Pressure Gauge, 0-100 PSI , 1/8” MPT $45.25


Check Valves for Liquid and Air Applications


Isolator Valve for Boom Air Lines- used on air systems including nozzle stops and product valves. Quickly dumps air from valves and safeguards against product entering air system if a breach occurs. Repair parts are available. Poly construction. Note: the new style valve has built-in 1/4”tube fittings.

Part Number Description PriceNS-NZ92-16 Isolator Valve (new style w/band clamp) $35.33NZ-2368 Diaphram Replacement for New syle $10.00NS-NZ92-18 Diaphram Replacement for Old style $10.08NS-NZ92-19 Check Valve Replacement for Old style $14.73

Old style isolator valve w/screws

New style w/band clamp

Part No. Construction Size (NPT) Used on Price 2292256 Stainless Steel 1/4” FPT Air lines $66.41 333-0011-078 Stainless Steel 3/8” FPT Air lines; Injection lines $67.00 CVSE50 Stainless Steel 1/2” FPT Injection lines $13.57 333-0011-102 Stainless Steel 1/2” FPT for N-SERVE injection $66.71 CVSE75 Stainless Steel 3/4” FPT Pressure lines $20.11 CVSE100 Stainless Steel 1” FPT Pressure lines $26.66 CVSE125 Stainless Steel 1-1/4” FPT Pressure lines $31.17 CVSE150 Stainless Steel 1-1/2” FPT Pressure lines $46.26 CVSE200 Stainless Steel 2” FPT Pressure lines $66.89 CV-0750-FF PVC 3/4” FPT Liq. N Applicators 10 psi $10.00 CV100MT Poly 1” MPT inlet x

1” FPT outlet Liquid products $9.53

84347992 Poly 1-1/4” FPT Pressure lines, Eductors $43.25

120’ BOOM FITTINGS


87630105 quick-nut for end of tubes

87638736 quick-nutfor sweep tee

87630097 elbow w/1-1/4” barb

87630096 straightw/ 1-1/4” barb

87630101 sweep tee with 87630102 coupling 84181302 square-cut seal ring for tee

87629044 oringfor end of tubes

bare tube end shows seat for oring

87630099 plug

87630102 adapter coupling

tube end with male adapter assy. (87630103 + 87630104) 87630103 bind ring & 87630104 split sleeve

New!

CASE Flush Valve- 41402-VOFlush Valve for 1” Threaded Boom Tubes- 25176-VO

SPRAYBAR ASSEMBLIES for CASE BOOMS (TWS TUBE)

Part Number Nozzle Outlets O.A. Length 87671764 4 65” 87671763 5 85” 87671762 6 106”

3330, 4420 & 4430 w/ 20” Spacings

Part Number Nozzle Outlets O.A. Length 87696867 7 65” 87696869 6 75” 87696868 5 82” 87696870 6 85” 87696871 7 95” 87696872 7 106”

3330, 4420 & 4430 w/ 20/30” Spacings

Part Number Nozzle Outlets O.A. Length 84159733 3 44” 87671764 4 65” 87671763 5 85” 87671762 6 106”

Part Number Nozzle Outlets O.A. Length 84226601 4 55” 84226604 5 66” 87696872 7 106” 84226605 8 115”

3230 w/ 20” Spacings 3230 w/ 20/30” Spacings

These assemblies include the spraybar tube and the polypropylene end fittings.


Victaulic Clamps & Fittings

Victaulic couplings for joining a variety of special grooved fittings. Two-piece clamp with two bolts and an EPDM gasket are quick and easy to assemble or disassemble.

Part Number Description Price 2399444 3” Coupling assembly $72.75 2399444-001 3” Gasket only $43.00 2399446 4” Coupling assembly $94.00 2399446-001 4” Gasket only $29.72

Victaulic pipe nipple with male threads and grooved end for clamp.

Part Number Description Price 8195374 3” Nipple x 3” long $51.50 2399453 3” Nipple x 6” long $47.50 8195451 4” Nipple x 3” long $93.50

Victaulic pipe/hose adapter with hose barb and grooved end for clamp.

Part Number Description Price 2399445 3” Hose barb adapter $51.25

Victaulic elbow- 90 degree. Both ends grooved for clamp.

Part Number Description Price 2393524 3” Elbow- 90 degree $75.00 VIC11 4 4” Elbow- 90 degree $64.17 VIC11 3 3” Elbow- 45 degree $71.73 VIC19 4” 4” Elbow- 45 degree $55.00

Other victaulic fittings are available on request.

Used on Case Titan liquid floaters and liquid bulk plants.



Aerofiner II Air Dryer- used on self-propelled equipment of all makes. Repair parts available for normal service intervals. Over time, air dryer dessicant becomes inefficient due to saturation by oils passing through the air system from the compressor. When this occurs the dessicant must be replaced. In some cases the purge valve may also need servicing. A seperate purge valve kit is available. It is recommended that dessicant be replaced yearly on most systems and more often on older systems with compressors that bypass too much oil.

Part Number Description Price 2294190 Dessicant Replacement Kit $152.54 2294195 Purge Valve Service Kit $116.80

Midland Pure Air Plus Air Dryer- used on Case self-propelled equipment including Titan and FLX models. Air dryers should be serviced before each season of use. Dessicant material can become inefficient by contamination with oil in the air system from the air compressor. Replace dessicant yearly or when contamination occurs. Purge valves should be serviced as required. A seperate repair kit is available for purge valve. Coalescing filters should be replaced yearly or sooner if it becomes coated with carbon or other contaminants.

Part Number Description Price 2296407 Air Dryer Replacement $756.81 2296407-001 Coalescing Filter Kit $67.50 2296407-002 Dessicant & Coalescing Filter Kit $234.00 2296407-003 Purge Valve Kit $87.50

Magnum 100 Air Suspension Seat- Replacement for air seats in many makes of self-propelled application equipment. Seat with Tuff-Tex™ fabric for long wear, self-lubricating, Teflon-impregnated bearings, built-in lumbar and thigh support, fore-aft slide adjustment, easy operator weight adjustment, four position height adjust-ment and infinite-position back angle adjustment, arm rests.

Part Number Description Price 2394917 Magnum Seat $1480.03 2293211 Seat Belt Kit $67.25 2394915-001 Air Bag Replacement $126.40 2394915-003 L.H. Arm Rest Asm. $120.00 2394915-004 R.H. Arm Rest Asm. $120.00 2394915-009 Shock Absorber Replacement $112.00 2392255 Air Valve Replacement $82.75

Halogen Floodlight Worklamp- 3” x 5-1/2” halogen sealed beam flood light for add-on field lighting.

Part Number Description Price 29252 50 Watt Flood Light, Pedestal Mount $49.53 98185 Sealed Beam Replacement $36.14

Purest Air Dryer- used on newer Case self-propelled equipment including FLX 20 series models.

Part Number Description Price 87656542 Air Dryer Replacement $842.42 87656549 Multi-treatment Cartridge Kit $221.00 87656555* Purge Assembly Kit $77.75 87656556* Pressure Relief Valve Kit $36.67` 87656569 Lower Housing Repair Kit (incl. items marked *) $93.00

Top Tank 135 gallon fresh water supply tank for top mounting on 56”-65” diameter floater tanks. Kit includes mounting hardware. Tank has 6” fill with vented, screw-on cap. Bulkhead type fittings required for outlets are ordered separate.

Part Number Description Price 2395067 135 gal. Top Tank Kit, White $512.69 CRM99-0003 Repl. Straps (4) $37.38 2395067-003 Mounting kit only $253.10 2395067-004 135 gal. Tank only, White $379.21 310977 135 gal. Tank only, Grey $379.21 321007 70 gal. Tank only, Grey $540.74

Floor Mats & Mud Flaps for Floaters Part Number Description Price 2406306-002 Floor Mat for Titan with Steel Cab, Precut $167.41 314494 Floor Mat for FLX cab $584.3920017500-4 Mud Flap Material, 39” Wide x 48” Long $97.15


Foam Marker System FM-150 foam marker kit by CDS-John Blue Co. is economical and dependable. Kit consists of 12-volt compressor, solution tank, con-trol box and parts necessary for installation on any type of sprayingor other application equipment. Features include: • Compressor is factory mounted on the tank • 15 gallon solution tank • 2-way switch for either left or right side operation • Adjustable for foam output frequency • Foam mixes at end of boom for quick delivery • 118 feet of liquid and air tubing for booms up to 100 feet • Air tube is 5/16” diameter • Liquid tube is 1/4” diameter • 15 feet of cable for connecting remote switch to compressor • 6 feet of power cable to connect to power supply Optional kits available: • Foam nozzle extension (used to generate small foam strips) • 150 feet of liquid and air tubing for booms larger than 100 feet

Part no._ FM-150__ Price: $877.91 (net)



Ref Part # QTY Description

1 27463 1 Air Compressor

2 27466 1 Breather Filter

3 63912 + 1 Directional Valve

7 73408 1 Tee- Pump Outlet

8 69056 * + 1 Mix Tube w/Fittings & Check Valve

9 53888 2 Mix Tube Clamp

10 27472 * + 1 Check Valve

11 GHSG05000125 4 1/2" x 48" SG Tubing

NS HC-.500 2 Hose Clamp #10

12 27469 1 Liquid Pump

13 HB025 1 Hose Barb 1/4 NPT

14 GHEVA02500125 10 1/4" EVA Tubing x 120"


15 HB050/075-90 2 Hose Barb 90- 1/2"MPT x 3/4" Barb

16 GHEVA07500125 90 EVA Tubing to 60' Booms

~ 100 EVA Tubing to 75' Booms

~ 120 EVA Tubing to 90' Booms


19 TF150 1 1-1/2" Bulkhead Fitting

20 RB150-075 1 Reducer Bushing 1-1/2" x 3/4"

21 RB075-050 1 Reducer Bushing 3/4" x 1/2"

22 SL050-90 1 Street Elbow 1/2"

23 313233 1 Strainer Asm.

~ 98717 1 80 Mesh Screen

24 73517 1 Hose Barb 1/2" FPT

25 41770 1 Vinyl Coated Clamp

26 27474 2 Foam Drop Asm. (includes items 27-33)

27 HB100-075 Hose Barb 1" MPT x 3/4"

28 NY-CC1616 Coupling 1"

29 HB100-075-90 Hose Barb 90- 1" MPT x 3/4"

30 GHSP075002 Hose 3/4" SP x 12"

NS HC-.750 Hose Clamp #12

31 25319 Bell- Foamer Drop

NS HC-1.50 Hose Clamp #28

32 Sold with 33

33 27462 Screen Asm.

34 63914 1 Valve 1/2" MPT x FPT

35 301731 * + 1 Orifice Asm.(includes items 36-40)

36 Filter Body Cap

37 Body Cap- 1/4" HB

38 CP4916-35 Orifice

39 8079-PP-100 Filter Screen

40 Filter Body- 1/4" MPT

Foam Marker-High Volume

Notes: (*) Indicates parts included in Kit # 27468 (also includes vinyl hoses for updating mix tube) (+) Indicates parts included in Kit # 27470-1 (also includes vinyl hoses for updating mix tube and older 2-valve systems) NS = Not Shown

PRO TUFF® 18V CORDLESS GREASE GUN

Features: • Powerful 18 Volt battery- the strongest of any cordless grease guns. • Heavy-duty motor delivers over 7,500 psi of force. • 1-hour Quick charger (110 volt). • Two (2) 18 Volt long-life, Nicad batteries included. • Extra-long 42” rugged professional-grade flex hose. • Coupler with durable bend restrictors on both ends for extended hose life.

Part No._ 30-600 Price: $199.33 (Net)

Accessories:30-610_ 18V Battery___$74.1930-611_ 18V Charger__$38.5030-612_ 42” Flex hose__$33.0930-616_ Plastic Cover__$31.00 Net Pricing prevails.

Heavy-Duty Plastic Storage Case

18 Volt 1- Hour QuickCharger

Two 18 VoltHeavy-DutyNICADBatteries

42” Heavy-Duty Flexible Hose with Bend Restrictors for added life and durability

Carrying Strap

• Heavy-duty plastic storage case. • Ergonomically balanced to minimize operator strain. • Three (3) loading options: cartridge, suction and bulk loading. • Shoulder strap to reduce user fatigue. • Detailed, easy-to-follow User Manual. • Gun weight is only six (6) pounds.

Professional Pistol Grip Grease Gun

Features: • Variable stroke increases volume of grease released. • Three-way loading: cartridge, bulk or suction. • Includes 18” hose, bulk filler fitting, air relief valve & vinyl grip. • Developes up to 7,000 psi.

Part No._ 30-416 Price: $33.93


Portable Pressure Washers

Part Number Description PriceMC275HX 2700 PSI Gas Engine Powered Pressure Washer with Honda GC160 (160cc)

2.3 gpm Commercial-grade Axial Pump, 25’ X 1/4” High-pressure Hose with Quick Connect Ends, 36” Industrial-grade Gun/Wand Assembly & Four Spray Nozzles (0°, 15°, 40°, soaper), Downstream (low-pressure) Soap Injector.

$578.00

MC317RX 3100 PSI Gas Engine Powered Pressure Washer with PowerEase OHV(210cc) 2.3 gpm Commercial-grade Axial Pump, 25’ x 1/4” High-pressure Hose with Quick Connect Ends, 36” Industrial-grade Gun/Wand Assembly & Four Spray Nozzles (0°, 15°, 40°, soaper), Downstream (low-pressure) Soap Injector.

$453.00

MC4013HA 4000 PSI Gas Engine Powered Pressure Washer with Honda GX390, 389cc, 4.0 gpm Commercial-grade Triplex Plunger Pump, 50’ x 3/8” High-pressure Hose with Quick Connect Ends, 36” Industrial-grade Gun/Wand Assembly & Four Spray Nozzles (0°, 15°, 40°, soaper), Downstream (low-pressure) SoapInjector.

$1310.00

MC4015RA 4000 PSI Gas Engine Powered Pressure Washer with PowerEase OHV 420cc, 4.0 gpm Commercial-grade Triplex Plunger Pump, 50’ x 3/8” High- pressure Hose with Quick Connect Ends, 36” Industrial-grade Gun/Wand Assembly & Four Spray Nozzles (0°, 15°, 40°, soaper), Downstream (low-pressure) Soap Injector.

$824.83

MC152EN 1500 PSI Electric Motor Powered Pressure Washer with 2 hp, 110 volt, Com-mercial-grade Triplex Plunger Pump, 25’ x 1/4” High-pressure Hose withQuick Connect Ends, 36” Industrial-grade Gun/Wand Assembly & Four Spray Nozzles (0°, 15°, 40°, soaper), Downstream (low-pressure) Soap Injector.

$726.00

MC205BA 2000 PSI Electric Motor Powered Pressure Washer with 5 hp, 220 volt, Com-mercial-grade Triplex Plunger Pump, 50’ x 3/8” High-pressure Hose with36” Industrial-grade Gun/Wand Assembly & Four Nozzles (0°, 15°, 40°, soaper), Downstream (low-pressure) Soap Injector.

$1450.00

MC275HX MC4015RA

Other models available on request.

MC4013HA

MC152EN MC205BA


AIR COMPRESSORS

25 GallonVertical12 Gallon Horizontal

Part Number Description PriceMCAC3025 25 Gallon Vertical Air Compressor with 3 hp, 120 volt Electric Mo-

tor, 13.6 Amps, 125 psi, 5.2 cfm @ 40 psi, 3.8 cfm @ 90 psi. $466.00

MCAC5080MH 80 Gallon Vertical Air Compressor with 5 hp, 208-240 volt, 1- phase Electric Motor, 175 psi, 17.5 cfm @ 100 psi, 15.8 cfm @ 175 psi.

$1970.00

MCAC3012 12 Gallon Air Horizontal Air Compressor with 3 hp, 120 volt Elec-tric Motor, 125 psi, 5.2 cfm @ 40 psi, 3.8 cfm @ 90 psi.

$308.00

80 Gallon Vertical

Other models available on request.


Battery Chargers & Accessories by Schumacher®

SE-1275A

SE-6030

Traditional metal hand-held starter/chargers are fully automatic- will not overcharge batteries. 2 year limited warranty. SE5212ADS_ 50 amp start/ 10 amp fast charge/ 2 amp trickle charge for 12-volt batteries__ Price: $82.75 SE1275ADS_ 75 amp start/ 12 amp fast charge/ 2 amp trickle charge for 12-volt batteries__ Price: $109.00 SE125ADS_ 125 amp start/ 15 amp fast charge/ 2 amp trickle charge for 6 & 12-volt batteries__ Price: $143.00

Wheel-style portable starter/chargers with tough, all-steel cases and baked enamel fin-ish. Fan cooled. 3 year limited warranty. SE4022DS_ 200 amp start/ 40 amp rapid charge/ 10 amp fast charge/ 2 amp trickle charge for 6 & 12-volt batteries. Has multi-function tester to help analyze electrical sys-tems__ Price: $220.00 SE6030DS_ 300 amp start/ 60 amp rapid charge/ 30 amp rapid charge for 6 & 12-volt batteries__ Price: $300.00 SE8050DS_ 300 amp start/ 60 amp rapid charge/ 30 amp rapid charge for 6 & 12-volt batteries. Has on-board load tester- tests up to 50 amps on 6-volt/ 100 amps on 12-volt_ _Price: $342.00

Other battery chargers, starters, power sources and related equipment are available. For more information on other products, go to web site - www.batterychargers.com

CASE IH Portable Power Station

Multi-purpose power supply for use as auto jump starter, tire inflation, and alter-nate power source for tools, computers and audio equipment. Features: Auto jump starter with 600 cranking amps; Heavy duty booster cables42” long with rust resistant clamps and built-in storage; 260 psi high-output motorwith 18” hose; AC power inverter with 800 watt peak surge and overload protection and two receptacles; DC power source with overload protection for 12 volt applica-tions; AC & DC charging adapters; Rapid recharge (AC/36 hours - DC/12 hours);USB port for charging your iPod, cell phone, laptop, digital cameras and more;Audio input socket for AM/FM radio; Built-in 5 LED bright flashlight function.

Part No.__ MC2454__ Price: $171.00



$271.00

$374.00

$420.00

$466.00

$1400.00

$540.00

$938.00

$1032.00

Mechanics Tools from CASE Quality hand tools made for CASE IH by Snap-On Industrial Tools. This new tool line has been engineered and priced to provide the best value for all users and carry a lifetime warranty. * * Does not include air tools or torque wrenches.

Combination Wrenches - All wrenches are highly polished, chrome plated for lasting durability and appearance.Available in sets or single wrenches in SAE & Metric sizes.

Part Number Description Price SC60001 11- Piece SAE set. Incl. 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”,

13/16”, 7/8”, 15/16” & 1” $73.50

SC60501 10- Piece Metric set. Incl. 10, 11, 12, 13, 14, 15, 16, 17, 18, & 19 mm $67.00 SC60006 7- Piece SAE set. Incl. 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16” &

1-1/2” $166.00

SC60506 7- Piece Metric set. Incl. 20, 21, 22, 23, 24, 27 & 30 mm $169.00

Ratcheting Box Combination Wrenches - 15 degree offset on box end with dual pawl ratchet for smooth operation and maximum strength. Nickel chrome finish for durability.

Part Number Description Price SC70001 8- Piece SAE set. Incl. 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” & 3/4” $136.00 SC70501 8- Piece Metric set. Incl. 10, 11, 12, 13, 14, 15, 16 & 17 mm $136.00

Crowfoot Ratcheting Wrenches - Made from high-grade chrome vanadium steel with nickel chrome finish for durability.Dual pawl ratchet for smooth operation and maximum strength.

Part Number Description Price SC24001 9- Piece SAE, 3/8” drive set. Incl. 5/16”, 3/8”, 7/16”, 1/2”, 9/16”,

5/8”, 11/16”, 3/4” & locking extension bar $155.00

SC24501 11- Piece Metric, 3/8” drive set. Incl. 10, 11, 12, 13, 14, 15, 16, 17,18, 19 mm & locking extension bar

$212.00

Screwdrivers - Extra-strong chrome vanadium blade with bi-mold comfort grip handles for dura-bility and added gripping power. Available in sets or individual pieces.

Part Number Description Price SC80001 5- Piece set. Incl. three slotted blade (3/16”, 1/4”, 5/16”)

drivers & two Phillips blade ( #1 & #2) drivers $24.75

SC80007 One 3/8” x 8” slotted blade driver $9.85 SC80010 One 3/8” x 10” slotted blade driver $11.25 SC80005 One Magnetic Ratcheting screwdriver $25.00


Mechanics Tools from CASE Socket Sets - Made from high-grade cold-formed alloy with highly polished chrome finish for durability and appearance. Hardened sockets for ultimate strength.


SC10001 28- Piece set with 1/4” drive. Incl. 6 pt. SAE sockets 5/32” to 9/16”, 6 pt. Metric sockets 4 mm to 14 mm,1/4” pearhead ratchet, 1-1/2” & 6” extensions, universal joint & driver handle.

$48.75

SC20001 16- Piece set with 3/8” drive. Incl. 12 pt. SAE sockets 1/4” to 7/8”, 3/8” ratchet, 3” & 6” extensions, universal joint & 5/8” spark plug socket

$48.50

SC20501 12- Piece sockets set with 3/8” drive. Incl. 12 pt. Metric sockets 8 mm to 19 mm $16.50 SC30001 12- Piece set with 1/2” drive. Incl. 12 pt. SAE sockets 7/16” to 1”, 1/2” ratchet & 5” extension $51.04 SC30501 13- Piece sockets set with 1/2” drive. Incl. 12 pt. Metric sockets 13 mm to 32 mm $36.63 SC40001 21- Piece set with 3/4” drive. Incl. 12 pt. SAE sockets 7/8” to 2”, 3/4” ratchet, 4” & 8” extensions &

19” flex breaker bar $335.00

SC40501 13- Piece sockets set with 3/4” drive. Incl. 12 pt. Metric sockets 22 mm to 55 mm $186.00 SC14001 10- Piece Deep well sockets set with 1/4” drive. Incl. SAE sockets 3/16” to 9/16” $21.75 SC14501 12- Piece Deep well sockets set with 1/4” drive. Incl. Metric sockets 4 mm to 14 mm $25.25 SC22001 11- Piece Deep well sockets set with 3/8” drive. Incl. SAE sockets 3/8” to 1” $42.75 SC22501 10- Piece Deep well sockets set with 3/8” drive. Incl. Metric sockets 10 mm to 19 mm $32.25 SC32001 10- Piece Deep well sockets set with 1/2” drive. Incl. SAE sockets 7/16” to 1” $47.62 SC32501A 14- Piece Deep well sockets set with 1/2” drive. Incl. Metric sockets 13 mm to 32 mm $81.75


SC17050 1/2” drive impact wrench. 425 ft. lb. torque $195.00 SC17075 3/4” drive impact wrench. 1,100 ft. lb. torque, 3/8” air inlet, 9.5 cfm $573.00 SC17038 3/8” drive air ratchet. 55 ft. lb. torque $153.79 SC31001 11- Piece impact sockets set with 1/2” drive. Incl. SAE sockets 3/8” to 1” $35.25 SC31501 10- Piece impact sockets set with 1/2” drive. Incl. Metric sockets 10 mm to 19 mm $33.25 SC41001 13- Piece impact sockets set with 3/4” drive. Incl. SAE sockets 3/4” to 1-1/2” $150.88 SC41501 14- Piece impact sockets set with 3/4” drive. Incl. Metric sockets 19 mm to 46 mm $168.05


Mechanics Tools from CASE 42-Piece Bit Set - made from high-grade chrome vanadium steel.Nickel chrome finish for durability. Includes 3/8” ratchet, torx bits, metric sockets, standard SAE sockets, phillips bits, slotted bits, 3” extension, 3/8” x 1/2” adapter and universal joint. Part Number_ SC18001__Price: $163.96

3-Piece Pliers Set - Quality chrome vana-dium, heat-treated for strength and durability.Includes 7” slip-joint pliers, 7” needle nose &7” diagonal cutter. Part Number_ SC90001__ Price: $23.79

5-Piece Locking Pliers Set - E-coated for resistance to corrosion and welding splatter. Quality cold-rolled steel with drop forged jaws.Smooth rounded edges for comfort and safety. Spring-loadedrelease permits quick, ‘no-pinch’ release when firmly locked. Part Number_ SC90005__ Price: $80.25

4-Piece Snap Ring Pliers Set - Adjustable forinside and outside snap rings. Includes one 5-1/2”straight nose, one 5-1/2” 90° nose, one 7-1/4” straight nose and one 7-1/4” 90° nose pliers. Part Number_ SC90004__ Price: $64.75

Prybars - Set of four sizes with handles, 8”, 12”, 18” & 24”. Also, individual prybars in 36”, 42”, 48” or 58”. Also available is a 30” pinch bar with one end pointed. High-quality for high leverage potential.

Part Number Description Price SC16001 4-Piece Set, 8” to 24” $47.77 SC16136 36” Prybar $72.06 SC16142 42” Prybar $77.47 SC16148 48” Prybar $106.49 SC16158 58” Prybar $117.41 SC16030 30” Pinch Bar w/ pointed end $29.73


Mechanics Tools from CASE

6-in-1 Screwdiver Set - Over-size, ultra-comfort-able rubber-grip handle for greater torque. Heavy-duty chrome vanadium bits with magnetic tips. Part Number_ MC220061__ Price: $6.45

8-Piece Punch & Chisel Set - Includes three pin punches (1/8”, 3/16” & 1/4”), one solid 5/32” punch, one center punch and three cold chisels (5/16”, 1/2” & 3/4”). Part Number_ SC13100__ Price: $48.40

4-Piece Utility Tool Set - includes one each of chisel-type scraper, scratch awl,cotter pin puller & radiator hose remover. Part Number_ SC80520__ Price: $31.03

Stainless Steel Scraper - Offset design blade, 1-1/4” wide with metal-capped, rubber grip handle. Part Number_ MC000SCR__ Price: $7.35

Heavy-duty Utility Knife - Industrial grade,folding utility knife. Comes with 5 extra blades. Part Number_ MC59952__ Price: $12.50

Tape Measure - Compact design, 25’ x 1” tape with markings in feet and inches ( to 1/32”), oversized numbers, heavy-duty spring for smooth retraction, coated and hardened steel blade to resist wear. Part Number_ MCIH54125__ Price: $9.72

Digital Tire Gauge - Features an illuminated tip and readout, heavy-duty metal die cast body, a shock-proof rubber guard, molded fingergrips, auto OFF and steel carrying clip. Reads 5-150 psi. Battery isincluded. Part Number_ MC5030__ Price: $18.75

Magnetic Parts Trays - Large 5-3/8” x 9-3/8” magnetic tray.Part Number_ MC2202LMT__ Price: $10.50or3-Piece Utility set - includes 4” round tray, tele-scoping pick up tool and mirror tool.Part Number_ MC22013MT__ Price: $10.50


Mechanics Tools from CASE Cargo Straps w/ Ratchet - Available in 1” standard duty or 2” heavy duty. Features weather and corrosion-resistant hardware finished with zinc and nickel plating or powder coating, cut and abrasion-resistant, high-strength polyester webbing -performs better than nylon- with engineered stitching for added strength, comfortable thermo-plastic handles molded onto frames of ratchet. Standard duty 1” straps have PVC coated ‘J’ hooks that will not scratch.

Part Number Description Break Strength

Price

MC3000 2” Heavy-duty Strap with JJ Hooks, 27’ x 2” 10,000 lbs. $31.20MC3100 2” Heavy-duty Strap with Flat Hooks, 27’ x 2” 10,000 lbs. $31.20MC3300 1” Standard duty Strap with J Hooks, 16’ x 1” 1,500 lbs. $12.00MC3500 1-1/4” Standard duty Strap with JJ Hooks, 16’ x 1-1/4” 2,500 lbs. $19.85MC3600 1-1/2” Standard duty Strap with JJ Hooks, 16’ x 1-1/2” 5,000 lbs. $19.81

1” Standard duty strapwith J Hooks 2” Heavy-duty strap

with JJ Hooks

Heavy-Duty Drum Dolly - Extra heavy-duty design for 55 gallon drums in a rough shop environment. Four heavy-duty casters are welded to the base. For drums up to 23” diameter. Part Number_ MC5432__ Price: $99.75

Drum Wrench/Drum Opener - Designed to open both 2” and 3/4” plugs on most types of drums. Made from non-sparking, durable cast aluminum that has been tempered and hardened for increased strength. Part Number_ MC5433 __ Price: $16.50

Barrel Pump - For oil-based fluids. Fits drums from 15 gallons to 55 gallons. Dispenses 10 ounces per stroke. Designed with a steel body and ribbed section and an aluminum die-cast pump head providing maximum strength and durability. The plated steel handle has a rubber grip for comfort. It comes with a built-in 1-1/2” and 2” bung adapter for drums with either opening. Part Number_ MC5404__ Price: $41.25

7-Way Trailer Adapter - Plugs into 7-way spade type terminals foundon most vehicles. Adapts to 6 round pin and 4/5 pin trailer connections.Sealed plug keeps out debris and protects against corrosion. Part Number_ MC8400 __ Price: $27.29


Gasket Maker - Makes high performance black elastomeric rubber gaskets in one min-ute. Blowout resistant. Temperature resistant to 500° F. 4 oz. container. Part No._ ZPX25223__ Price: $24.75

Clear RTV Silicone Adhesive Sealant - All-purpose adhesive and sealant. Dries clear. 7.25oz. power container. Part No._ ZPX30562__ Price: $22.00

Carb & Choke Cleaner - Removes depositedgum, grease and gasoline residue from carbure-ators, choke linkages and external metal engine parts. Smooths rough idle and restores power.16 oz. container. Part No._ ZRG017CRBC__ Price: $5.67

Glass Cleaner - Cleans, shines andpolishes all glass and plastic surfaces.Non-streaking finish. 18.5 oz. container. Part No._ ZRG018GLC__ Price: $3.70

Brake Parts Cleaner - Professional strength, non-chlorinated formula cleans parts of grease, oil and brake fluid residue. Instant evaporation. Loosens brake dust. 14 oz. container. Part No._ FL201__ Price: $3.49

Electric Contact Cleaner - Heavy-duty,fast-evaporating cleaner removes greaseand other contaminants from electrical parts. Can be uses to clean metal. Use asa final wash of parts before assembly. Improves gasket and sealant adhesion.11.5 oz. container. Part No._ B505513__ Price: $5.89

Battery Saver - Provides a protective coatingthat prevents formation of corrosion. Prolongsbattery, cable and clamp life. 12 oz. container. Part No._ B505515__ Price: $6.16

Graphite Lubricant - Non-stick coating canbe sprayed onto any surface to reduce friction.Can be used as a lubricant on chains, hitches,door tracks, winches and hinges. Also, use asa surface conditioner on gravity boxes, hoppers,wagon beds, chutes, moldboards, planters and markers. Protects metal against rust. 12 oz. container. Part No._ 407408R1__ Price: $9.44

Degreaser - All-purpose, biodegradable,industrial strength cleaner/degreaser. Thisproduct is formulated for wipe down, pres-sure spraying and immersion at normaltemperatures. Citrus scented and non-flammable. Available in one gallon full strength or 24 oz. spray bottle diluted 1:1 for ready use. 24 oz. spray bottle_ Part No._ B505517__ Price: $11.18 1 gallon concentrate_ Part No._B505518__ Price: $25.25

Silicone Lube Spray - Heavy-duty lubricantthat weather-proofs and protects. Reduces friction. Works on metal, plastics, rubber and synthetics. Great for installing hoses on barbedfittings and replacing bladders in pinch valves.12 oz. container. Part No._ B505503__ Price: $5.18

Anti-Seize Lubricant - High-performance lubri-cant that keeps parts free from seizing due to high heat or corrosion. Reduces galling of press-fitted parts. 16 oz. jar_ Part No._ ZPX76716__ Price: $19.74 12 oz. spray_ Part No._ B505504__ Price: $9.67

Penetrating Oil - Industrial strength, loosens rusted parts. Penetrates quickly. Prevents corrosion on all metals. 12 oz. container. Provides lubrication. Part No._ B505501__ Price: $4.85

Automotive & Industrial Lubricants, Sealants & Cleaners


Vibra-Tite Thread Lockers & SealersPart Number Description Price ND12150 Medium Strength Thread Locker, Blue, 50 ml $26.50 ND13150 Permanent Strength Thread Locker, Red, 50 ml $26.50 ND 44450 Hydraulic Thread Sealer, Brown, 50ml $25.20

Chain & Cable Lube - Helps protect againstrust and corrosion on all types of equipment.Fast penetrating action. Reduces chain wear. Resists high temperature breakdown. Heavyviscosity reduces throw-off. Increases life ofchains and cables. 12 oz container. Part No._ B505500__ Price: $6.04

White Lithium Grease - Aerosolized lithiumcomplex grease, which has exceptional resistanceto water and evaporation. Provides good lubrica-tion and reduces friction. Sprays into hard-to-reach places. Not affected by normal hot and coldtemperature extremes. 12 oz. container. Part No._ ZRG012WGC__ Price: $5.86

Wheel Bearing Grease - Composed of EP Grease. Resistant to water, acid, salt and alkali. Formulated to withstand high temperatures. 1 lb. container. Part No._ B505497__ Price: $17.95

Starting Fluid - Premium grade with 70%ether for quicker engine starts. For use withboth gasoline and diesel engines. Contains upper cylinder lubricant and corrosion inhib-tors. Not for use with pre-heat manifolds or glow plugs. 7.4 oz. container. Part No._ ZAD3__ Price: $3.99

Paints Part No. Description Price 55083 Bengal Tan, Mertz/Tyler - Aerosol $14.60 96939A Bengal Tan, Mertz/Tyler- Gallon $185.76 AGC513210 Yellow, Mertz/Tyler- Aerosol $14.56 FL404 White, Gloss- Aerosol $16.15 FL401 Black, Gloss- Aerosol $15.23 FL402 Black, Flat- Aerosol $15.23 990121N CASE Black, No-Glare- Aerosol $9.95 B17680N CASE Black, Gloss- Aerosol $9.95 B96104 CASE Black (Dark Gray) - Aerosol $9.95 B96105 CASE Black (Dark Gray) - Quart $17.49 B17566N CASE Red- Aerosol $9.95 B17564 CASE Red- Quart $17.49 B17562 CASE Red- Gallon $61.95 B17567N CASE Silver- Aerosol $9.95 B17565 CASE Silver- Quart $17.49

Part No. Description Price B91253N Primer, Gray- Aerosol $10.23 B17692 Thinner- Quart $9.24 B17693 Thinner- Gallon $27.00 600225 AgSystems Red- Aerosol $17.55 600222 AgSystems Blue- Aerosol $15.05 1856 Primer, Tufcote- Gallon $144.75 FL403 Primer, Gray Sandable- Aerosol $15.62 8108P Hardener (use with Bengal Tan- Gal-

lon) $24.99

5855 Reducer- Gallon $19.99

Automotive & Industrial Lubricants & Other Products


Nylon Tie Straps

Part No. Description Qty./ Pkg. Price CTB06 6” Tie Strap, Black 100 $6.83 CTB14 14” Tie Strap, Black 100 $13.33 CTB14H 14” H.D. Tie Strap, Black 100 $25.00 CTB28 28” H.D. Tie Strap, Black 50 $27.50

Work Gloves from CASE Mechanics Gloves - Durable synthetic leather palm. Breathable, form-fitting spandex back with adjustable wrist closure to lock out dirt and debris. Machine wash, air dry.

Part No. Description Price

MC6000M Case IH, Medium $16.25MC6000L Case IH, Large $16.25MC6000XL Case IH, X-Large $16.25

Heavy-duty Mechanics Gloves - Breathable, form-fitting spandex back and padded knuckles. Abrasion-resistant, non-slip palm patches. Terry cloth sweat wipe on thumbs. Adjustable wrist closure to lock out dirt and debris. Machine wash, air dry.



Grain Cowhide Gloves - Classic soft-tanned leather with tailored keystone thumb.Self-hemmed with shirred elastic back.



Lined Suede Cowhide Gloves - Soft and durable suede leather with tailored keystone thumb. Extra-warm lining. Self-hemmed with shirred elastic back.


MC6855L Case IH, Large $17.00MC6855XL Case IH, X-Large $17.00

Leather Palm Gloves - Rugged suede cowhide. Leather finger tips and knuckle strap.Shirred elastic back, Rubberized safety cuff.


MC6900L Case IH, Large $6.25


FILL-RITE FUEL PUMPS by TUTHILL Fill-Rite fuel pumps are designed for moderate to heavy-duty use for gaso-line, diesel fuel, light oils and most non-corrosive petroleum-based fluids. Durable cast iron construction offers high quality, long-lasting performance. The Fill-Rite standard duty line is backed with a one year warranty and is the ideal choice for cost-conscious consumers. The heavy-duty pumps carry a two year warranty. Available in both 12-volt DC and 115 volt AC versions. Rated up to 20 gpm. U/L listed motors. Thermal overload protection, 30 minute duty cycle. Comes with 2” NPT tank adapter and nozzle hanger. Pump can be padlocked.

Part No. Description Net Price SD1202 Standard Duty 12-volt fuel pump w/ 15’ power cable, 10’ x

3/4” fuel hose, 3/4” manual nozzle & 2-piece suction tube. Pumps up to 13 gpm.

$250.31

SD602 Standard Duty 115 volt, fuel pump w/ 12’x 3/4” fuel hose, 3/4” manual nozzle & 3-piece suction tube. 1/4 hp motor. Pumps up to 13 gpm.

$290.08

FR700Z Heavy-duty 115-volt fuel pump w/ 12’ x 3/4” fuel hose, 3/4” manual nozzle & 3-piece suction tube. 1/3 hp motor. Pumps up to 20 gpm.

$479.13

FR701Z Heavy-duty 115-volt fuel pump w/ 807 meter, 12’ x 3/4” fuel hose, 3/4” manual nozzle & 3-piece suction tube. 1/3 hp motor. Pumps up to 17 gpm.

$596.63

Fill-Rite Series 800 meter for AC or DC pumps. Heavy-duty mechanical meter with 1% accuracy @ 5-20 gpm flow. Resettable meter registers up to 99.9 gallons. Totalizer registers up to 99,999.9 gallons. U/L listed. Kit includes pipe adapters. Part No.__FR807CMK____price: $161.73 (net)

Accessories for Fuel Pumps Part Number Description Price 98108450 Farm fuel hose w/ static wire, 3/4” x 10’ $19.97 98108455 Farm fuel hose w/ static wire, 3/4” x 12’ $21.19 98108480 Farm fuel hose w/ static wire, 1” x 12’ $33.24 98108485 Farm fuel hose w/ static wire, 1” x 14’ $39.09 99000246 Automatic nozzle, unleaded gas- Red $32.61 99000239 Automatic nozzle, all fuels- Blue $33.40 99000247 Automatic nozzle, Diesel- Green $51.27


SD Series

FR Series

GPI OIL PUMPS

These GPI oil pumps are specifically designed for use with high viscosity fluids like oil. They willpump oil (up to 90 wt.), waste oil, hydraulic fluid, antifreeze and non-flammable oil-based solvents.They are weatherproof and will give years of service. Motors are UL recognized components and CSA approved. They have a one year factory warranty. Available with 12-volt DC or 115/230-volt ACmotors. Maximum operating temperature is 140° F. / 60° C.

Pump Model L5016 L5116 L5132Part Number 142100-03 142100-01 142100-02Voltage/Type 12- volt DC 115/230-volt AC 115/230-volt ACMotor HP 40 Amps 1/2 HP 1 HPFlow Rate up to 16 QPM up to 16 QPM up to 32 QPMBypass Pressure 50 psig 50 psig 50 psigDuty Cycle 30 min. on/30 min. off 30 min. on/30min. off 30 min. on/30 min. offPower Cord not supplied 36” w/grounded plug 36” w/grounded plugNozzle 3/4” Ball Valve Nozzle Ball Valve Type Ball Valve TypeInlet/Outlet Size 1” / 3/4” 1” / 3/4” 1” / 3/4”Suction Pipe Two-piece Two-piece Two-pieceHose 8 ft. x 3/4” 8 ft. x 3/4” 8 ft. x 3/4”Motor Protection Requires 50 Amp fuse Thermally Protected Thermally Protected Price (Net) $639.38 $358.05 $358.05

L5016 L5116 L5132

Oil Meters These GPI oil meters are designed for engine oils, transmission fluids or anti-freeze. They can be used for waste oil if a filter is installed before the meter.

LM50MNQ

LM-300

Pump Model LM50MNQ LM-300Construction Aluminum PBT PolyesterType Oval Gear Nutating DiscDisplay Mechanical DigitalDisplay Value up to 7 digits up to 6 digitsAccuracy +/- 1% +/- 2%Flow Rate 1-31 Qt./min. 8-80 Qt./min.Measures Quarts Quarts/LitersInlet/Outlet 1/2” NPT 1” NPTPrice (Net) $203.00 $194.91


Documents

TeeJet Three-way Valve for Foamers - Heartland Agheartlandagequipment.com/wp-content/uploads/2013/10/Section-G.pdf · 44103247 1/2” x 3/8” $4.26 ... Tube Elbow Barb Connector