Tellabs 100 Series Mini Optical Network Terminals (ONTs)oristel.com.sg/wp-content/uploads/2016/05/Tellabs_Datasheet.pdf · TELLABS™ 100 SERIES MINI OPTICAL NETWORK TERMINALS (ONT

TELLABS DATA SHEET

See Tellabs.com for more information about Tellabs Solutions 1

OverviewThe Tellabs™ 120W (in-wall) and 120C (cubicle) Mini Optical Network Terminals (ONTs) provide a new level of deployment efficiency and simplicity, further reducing the total cost of deployment of Optical LAN solutions. This next generation of ONTs are deployed fully integrated into the office environment; either in-wall, integrated into office furniture or in a stand-alone mini package. A full suite of voice, video, and high-speed data services in a compact and efficient package.

Like all Tellabs ONTs, the Tellabs™ 100 Series Mini ONTs provide high-speed/low-cost performance in all Enterprise and government environments. Additionally, the Tellabs 120 Series Mini ONT creates a neat, clean and efficient workspace, and provides a new level of security for all office environments.

These small ONTs offer powerful enterprise business features:

n Integrated deployment eliminates the need for desktop ONTs

n Two (2) 10/100/1000 Gigabit Ethernet interfaces

n Power over Ethernet (PoE) on each port

n Link Layer Data Protocol (LLDP) for fast and efficient IP end-point provisioning

n Remote powering allows for repurposing of existing CATx cable or leverage advances in hybrid fiber/copper infrastructure

n Existing battery back-up systems can be repurposed in the communication closet

n Modular design allows ONT to be field upgradable with expansion modules

n Uses Tellabs’ industry-leading government and Enterprise security, provisioning and quality of service mechanisms

n Alarmed faceplate — Removing faceplate sends alarm to management system (120W only)

n Network Access Control (NAC) enables individual user service profiles to automatically follow a user to any port on the Tellabs Optical LAN system, including service profile and security settings

n Operates with Tellabs’ complete line of Optical LAN OLT and ONT solutions

Equipped with an ITU-T G.984-compliant 2.5 Gbps downstream and 1.25 Gbps upstream GPON interface, the Tellabs Series 100 Mini ONT supports the full range of advanced services, including voice, video and High-Speed Internet (HSI).

Compliant with ITU standard ONT Management Control Interface (OMCI) definitions and managed by the Tellabs™ Panorama™ PON Manager, the Tellabs 100 Series Mini ONTs support the full range of FCAPS functions, including supervision, monitoring and maintenance for easy adds, moves and changes.

Tellabs™ 100 Series Mini Optical Network Terminals (ONTs)In-wall and cubicle ONTs save valuable space and enable out-of-sight office environment integration

Tellabs™ 120W Mini Optical Network Terminal (ONT)

Tellabs™ 120C Mini Optical Network Terminal (ONT)

DATA SHEETTELLABS™ 100 SERIES MINI OPTICAL NETWORK TERMINALS (ONTs)


Services

DataThe Tellabs™ 100 Series Mini ONTs deliver Enterprise-class data services in a compact and innovative package. With 2.5 Gbps of delivered bandwidth to the ONT, end-users gain access to gigabit speeds for today’s demanding business applications. Complete with a comprehensive Enterprise-class security architecture, organizations can rely on key features such as Denial of Service (DOS) protection and Network Access Control (NAC) with dynamic policy assignment.

Deployment efficiency can be gained by delivering both data and Power over Ethernet on a single-cable solution supporting edge devices, such as VoIP phones, surveillance cameras and wireless access points (APs). With support for eight (8) VLANs per Ethernet port, connecting multiple IP end points to a single ONT Ethernet port further enhances scalability.

Ease of connectivity is provided with RJ-45 data interfaces located directly on the in-wall faceplate or, in the case of the cubicle unit, directly in the raceway. Flexible location placement supports Wi-Fi APs, video surveillance, building automation systems.

VoIPVoice-over-IP services are supported using external VoIP phones and other Integrated Access Devices (IAD). Link Layer Data Protocol (LLDP) provides plug-and-play configuration for VLAN assignments, Quality of Service (QoS), Security policies and PoE power levels, enabling rapid deployment of unified communication services.

VideoThe Tellabs 100 Series Mini ONTs support flexible video content delivery in the form of Ethernet/IP data, either as unicast and multicast streams. Advanced IGMP, VLAN, and 802.1p/DSCP processing ensures secure and efficient service delivery for video conferencing, video surveillance and other video applications.

Specifications

Dimensionsn In-wall model

Faceplate: 4.51" (H) x 3.075" (W) x 0.525" (D) Base: 2.79" (H) x 1.625" (W) x 2.93" (D) Total depth is 3.45"

n Cubicle model 3.5" (H) x 2.0" (W) x 4.25" (D)

Power Supplyn Input at ONT (volts): 48–56 VDC

n Consumption Idle (watts): 6.3 W

n Consumption w/o PoE Max (watts): 6.4 W

n Consumption w/PoE Max (watts): 15.W

n Max Draw at ONT (amps): .536 A

n IEEE 802.3af PoE compliant

n 15.4 W of total PoE power per ONT120

n Remote powering or local powering

n Optional battery back-up

Operating Environmentn Temperature: -5° C to 50° C

n Relative humidity: 5% to 85%, noncondensing

Safety & EMIn ETSI, FCC and UL certified

Installationn In-wall unit mounts directly in wall

with standard gang box, mud ring, or extension ring

– 3/4" deep

– will work with the alarm of the 120W

– extension ring can be stacked to get 1.5" deep

n Cubicle unit mounts directly within standard raceways

Network Interfacen Compliant with ITU-T G.984

GPON standards

n SFF-type laser, SC/UPC connector

n SC/UPC to SC/APC jumper available separately

n Wavelengths: Downstream 1490 nm, Upstream 1310 nm

n 1.244 Gbps burst mode upstream transmitter

n 2.488 Gbps downstream receiver

n Compliant with ITU-T G.984.2 Amd1, Class B+

n APD receiver and DFB transmitter

n 0.5~+5 dBm launch power, -27 dBm sensitivity and -8 dBm overload

n Laser compliant to FCC 47 CFR Part 15

n Class B and FDA 21 CFR 1040.10 and 1040.11, Class I

GPON Quality of Service (QoS)n Fully ITU-T G.984-compliant framing

n Multiple T-CONTs and GEM ports per device

n Supports single T-CONT and multiple T-CONTs modes

n Flexible mapping between GEM ports and T-CONT with priority queue-based scheduling

n Activation with automatic discovered Serial Number and password

n AES-128 Decryption with key generation and switching

n Forward Error Correction (FEC)

n IP DSCP/ToS to 802.1p mapping

n Support for multicast GEM port

DATA SHEETTELLABS™ 100 SERIES MINI OPTICAL NETWORK TERMINALS (ONTs)


DATA SHEET

TEL9449 1/15

Ethernet Interfacesn Two (2) 10/100/1000Base-T Gigabit

Ethernet with RJ-45 connectors

n 802.3az Energy-Efficient Ethernet

n Power over Ethernet (PoE) leveraging the latest 802.3at chipset

n Class 3 15.4 W total, shared

n Autosensing MDI/MDIX or manual configuration

n IEEE 802.1D bridging

n Virtual switch based on 802.1Q VLAN

n 1024 MAC address, 512 VLAN groups

n Eight (8) VLANs per Ethernet port

n VLAN tagging/detagging, marking/ remarking per Ethernet port

n VLAN translation, trunking, stacking (Q-in-Q)

n CoS, QoS and Security policies based on each VLAN-ID, 802.1p, DSCP

n MAC address limiting to prevent flooding overflow

n IPv6 capable for Enterprise services

n L2–L4 Access Control Lists (ACLs)

n Upstream ACL rate limiting

n 802.1x Port-Based Authentication

n Link Layer Data Protocol (LLDP) for auto-provisioning and power control

n Network Access Control (NAC)

n IGMP v2/v3 snooping

LED Indicatorsn PON link status

n Ethernet link (per port)

n Ethernet Tx/Rx (per port)

Operations, Administration and Maintenance (OAM)n Standards-compliant OMCI as defined in

ITU-T G.984.4 and G.983.2

n Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get and Get Next commands

n Complete service provisioning, including Ethernet, VoIP, etc.

n Alarming and AVC report, performance monitoring

n Remote image download over OMCI as well as activation and rebooting

n Holds two versions with image integrity checking and automatic rollback

n Built-in location indicator for easy installation and labeling identification

Ordering Information

ONT120Cn Order part number 81.11G-ONT120C-R6

ONT120Wn Order part number 81.11G-ONT120W-R6

© 2015, Tellabs Access, LLC. All rights reserved.

+1 800 690 2324 +1 630 798 9900 www.tellabs.com

1415 West Diehl Road Naperville, IL 60563 U.S.A.

Take the next step. Contact Tellabs today.

TELLABS DATA SHEET

See Tellabs.com for more information about Tellabs Solutions

OverviewDesigned to deliver powerful business services to end users in a variety of free-standing, wall- or desk-mounting options, the Tellabs 709GP Optical Network Terminal (ONT) incorporates multiple Gigabit Ethernet ports in one compact, cost-efficient package.

Equipped with ITU-T G.984-compliant 2.5 Gbps downstream and 1.25 Gbps upstream G-PON interfaces, the Tellabs 709GP ONT supports a full range of advanced services, including voice, video, high-speed data, wireless, security, access controls and building automation. Power over Ethernet (PoE) compliant with IEEE 802.3at is provided on all four ports providing up to 60 watts of total power for VoIP phones, security cameras and wireless access points. An optional battery back-up is available separately, providing up to four (4) hours of back-up time.

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being compliant with ITU standard ONT Management Control Interface (OMCI) definitions and managed by the Tellabs® Panorama™ PON Manager helps speed installations and daily operations. Centrally controlled by the Tellabs Panorama PON Manager, the Tellabs 709GP ONT supports autodiscovery mechanisms, can be quickly provisioned using global templates and wizards, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes in everyday operations.

Services

DataFour 10/100/1000 Base-T Ethernet data interfaces support: autonegotiation and MDI/MDIX autosensing, data transfer at wire speed and advanced data features, such as VLAN tag manipulation, VLAN trunking, classification and filtering Power over Ethernet on all ports.

VoIPTo enable VoIP access, the Tellabs 709GP ONT supports interfacing to an external VoIP desktop phone or other IAD device. Quality of service and security are maintained throughout the G-PON network.

VideoThe Tellabs 709GP ONT supports video content delivered in the form of Ethernet/IP data (by multicast or unicast). When multicast technology is used for delivering video content through the data channel, the Tellabs 709GP ONT supports the dedicated multicast GEM port on the downstream. Thus, video content is received and processed by all the ONTs through the unified channel, significantly improving bandwidth efficiency.

In addition, the Tellabs 709GP ONT supports an Internet Group Management Protocol (IGMP) snooping function to be applied for further optimization. When IGMP snooping is enabled, the Tellabs 709GP ONT monitors the member joining and leaving activities at the Ethernet service port and then selectively delivers up to 48 multicast streams. Multicast Quality of Service (QoS) is supported via the 802.1p bits.

Tellabs® 709GP Optical Network Terminal (ONT)Flexible free-standing, wall- or desk-mounted multiport ONT provides a variety of service options and supports Power over Ethernet.

The Tellabs 709GP ONT features PoE on each data port.

DATA SHEETTELLABS® 709GP OPTICAL NETWORK TERMINAL (ONT)

See Tellabs.com for more information about Tellabs Solutions

DATA SHEET

TEL9940 10/15

Specifications

Dimensionsn 5.84 in (H) x 10.07 in (W) x 1.86 in (D)

Power n Input at ONT (volts): 48–56 VDC


n Consumption w/o PoE Max (watts): 8.44 W

n Consumption w/PoE Max (watts): 74.3 W

n Max Draw at ONT (amps): 1.5 A

n IEEE 802.3af PoE and IEEE 802.3at PoE+ compliant

n 60 watts of total PoE+ power per ONT709GP

n Remote powering or local powering

n Optional battery back-up system

n Dying Gasp support

Operating Environment n Temperature: -5° C to +55° C


Safety & EMI n ETSI, FCC and UL/ETL certified

Installation n Wall mounting, plenum &

desktop mounting

n Optional wall mounting bracket and plenum bracket sold separately

n Plenum bracket 81.11K-BKP140-5-R6 (5/pack)

Network Interface n Compliant with ITU-T G.984

G-PON standards

n SFF-type laser, SC/APC connector





n 0.5~+5 dBm launch power, -27 dBm sensitivity and -8 dBm overload

n Wavelengths:

– Upstream 1310 nm, Downstream 1490 nm

– Laser compliant to FCC 47 CFR Part 15, Class B and FDA 21 CFR 1040.10 and 1040.11, Class I

G-PON Quality of Service n Fully ITU-T G.984-compliant framing

n Multiple T-CONTs per device

n Multiple GEM ports per device

n Supports a single T-CONT and multiple T-CONTs modes

n Flexible mapping between GEM ports and T-CONT

n Activation with automatic discovered SN and password

n AES-128 decryption with key generation and switching forward error correction

n 802.1p mapper service profile on U/S

n Mapping of GEM ports into a T-CONT with priority queues-based scheduling

n Support for multicast GEM ports

Ethernet Interface n 10/100/1000 Base-T interface with

RJ-45 connectors

n Power over Ethernet compliant with IEEE 802.3at on all ports

n Total PoE Power = 60 watts (when using wall power supply or direct 48 VDC feed)

n Total PoE Power = 38 watts (when using battery back-up system)

n Link Layer Data Protocol for automated PoE power management

n Ethernet port autonegotiation or manual configuration

n MDI/MDIX automatic sensing

n Hardware priority queues in the downstream direction supporting Class of Service


n Up to 256 MAC addresses and 4 VLAN groups

n VLAN tagging/detagging per Ethernet port

n VLAN stacking, VLAN translation, VLAN trunking

n Marking/remarking of 802.1p



n Upstream broadcast rate limiting and filtering for security control

LED Indicators n Power n Alarm

n Update n LAN

n Optical

Operations, Administration and Maintenancen Standards-compliant OMCI as defined by

ITU-T G.984.4 and G.983.2

n Management Information Base manipulation over OMCI by Create, Delete, Set, Get and Get Next commands

n Provisioning of multiple services, including Ethernet, VoIP, etc.





Tellabs 709GP ONT n Order part number 81.16G-709GP00X-R6

n Minimum base software SR27.0

n Plenum bracket 81.11K-BKP709-5-R6 (5/pack)


+1 800 690 2324 +1 630 798 9900 www.tellabs.com



TELLABS DATA SHEET


OverviewDesigned to deliver powerful business Data, VoIP, and POTS services to 24 users, the stackable, scalable Tellabs® 1100-728GP and Tellabs® 1100-729GP MultiDesk/MultiDwelling Unit (MDU) GPON ONTs pack a lot of functionality into a compact one-rack unit (1 RU) chassis. Both units can be located in a telecommunications room, data center or telephone closet, driving fiber optics closer to the user.

Both units feature 24 Gigabit Ethernet ports with Power over Ethernet (PoE) for powerful business data service delivery. IEEE 802.3af PoE and 802.3at PoE+ compliance provides up to 30 watts on each Ethernet port. PoE provides remote power to VoIP desktop phones, Wi-Fi Access Points, IP Security Cameras, and other environmental and access control systems. The Tellabs 1100-729GP also features 24 POTS ports for analog business POTS service delivery.

Equipped with standard CAT-rated cabling for Ethernet data and voice service delivery, the Tellabs 1100-728GP and Tellabs 1100-729GP ONTs feature an ITU-T G.984-compliant 2.5 Gbps downstream and 1.25 Gbps upstream GPON interface supporting the full range of advanced services, including voice, video, data, Wi-Fi, smart buildings apps, security, surveillance, environmental and automation.

Compliant with ITU standard ONT Management Control Interface (OMCI) definitions, the Tellabs 1100-728GP and Tellabs 1100-729GP ONTs are managed by the Tellabs® Panorama™ PON Manager with full fault, configuration, automation, performance and security (FCAPS) functions, including supervision, monitoring and maintenance.

ServicesDatan 24 10/100/1000Base-T Gigabit Ethernet data interface ports

n IEEE 802.3at (30 W) PoE+ on each port

n Auto-negotiation and MDI/MDIX auto-sensing

n Data transfer at wire speed

n Advanced data features, including Virtual Local Area Network (VLAN) trunking, VLAN termination, VLAN translation, traffic classification and Access Control Lists (ACLs)

n IEEE 802.1P and IEEE 802.1Q

n 802.1x authentication


Voice (only available on Tellabs 1100-729GP ONT)n 24 POTS interface ports for carrier-grade voice services

n Five REN per line, balanced ring at 55 V RMS, DTMF dialing

n Support for multiple voice codecs

n Echo canceling, VAD, CNG

n Full CLASS service support — caller ID, call waiting, call forwarding, call transfer, etc.

n SIP (RFC-3261)

n Drop-in replacement to serve existing analog telephone sets

To enable VoIP access, the Tellabs 1100-729 MDU GPON ONT also supports interfacing an external IAD box or home router with voice capability through the Ethernet interface.

Tellabs® 1100-728GP and Tellabs® 1100-729GP MultiDesk/MultiDwelling Unit GPON ONTsFlexible, stackable MultiDesk/MultiDwelling Unit GPON ONT for Gigabit Ethernet, PoE+ and (optional) POTS services delivery.

Tellabs® 1100-728GP MultiDesk/MultiDwelling Unit GPON ONT

Tellabs® 1100-729GP MultiDesk/MultiDwelling Unit GPON ONT

DATA SHEETTELLABS® 1100-728GP AND TELLABS® 1100-729GP MULTIDESK/MULTIDWELLING UNIT GPON ONTs


VideoTellabs 1100-728GP and Tellabs 1100-729GP ONTs support flexible video content delivery in the form of Ethernet/IP data, either as unicast or multicast streams controlled by the Internet Group Management Protocol (IGMP). Multicast Quality of Service (QoS) is supported with a combination of 802.1p bits and advanced bandwidth management mechanisms. Using VLANs and advanced IGMP processing ensures security, service delivery and efficiency for each user.

The Tellabs 1100-728GP and Tellabs 1100-729GP ONTs are an excellent choice for all forms of enterprise video such as entertainment, security, video conferencing, high-end telepresence conferencing, telepresence robotics and surveillance.

Specifications

Dimensionsn 1.7 in/43 mm (H) x 17.3 in/439 mm (W) x

17.5 in/444 mm (D)

Power Supplyn Input power — 120/240 V AC 50/60 Hz

n 3-Pin AC power connector with switch and fuse (rear accessible)

n Dying Gasp support

Powering (ONT728GP)n Input at ONT (volts): 100–240VAC


n Consumption w/o PoE Max (watts): 110 W

n Consumption w/PoE Max (watts): 559 W

n Max Draw at ONT (amps): 8.0A



n Back-up power through existing building emergency power generation plant

n Power cord included (IEC C15)

Powering (ONT729GP)n Input at ONT (volts): 100–240V AC

n Consumption Idle (watts): 63 W

n Consumption w/o PoE Max (watts): 140 W

n Consumption w/PoE Max (watts): 589 W

n Max Draw at ONT (amps): 8.0 A



n Back-up power through existing building emergency power generation plant

n Power cord included (IEC C15)

Operating Environmentn Temperature: -5° C to +55° C


Safety & EMIn ETSI, FCC and UL/ETL certified

Installationn Rack or wall mounting

n 19-inch rack mounting, 1 RU height

n Brackets available for 23" mount option

Network Interfacen Compliant to ITU-T G.984 GPON

standards

n SFF-type laser, SC/APC connector

n Wavelengths: Upstream 1310 nm, Downstream 1490 nm





n 0.5~+5 dBm launch power, -27 dBm sensitivity, and -8 dBm overload

n Laser compliant to FCC 47 CFR Part 15, Class B and FDA 21 CFR 1040.10 and 1040.11, Class I

GPON Quality of Service (QoS)n Fully ITU-T G.984-compliant framing

n Multiple T-CONTs per device

n Multiple GEM ports per device


n Flexible mapping between GEM ports and T-CONT

n Activation with automatic discovered SN and password

n AES-128 Decryption with key generation and switching

n Forward Error Correction (FEC)

n 802.1p mapper service profile on U/S

n Mapping of GEM Ports into a T-CONT with priority queues-based scheduling


Ethernet Interfacen 10/100/1000Base-T Gigabit Ethernet

with RJ-45 connectors

n Power over Ethernet compliant with IEEE 802.3af and 802.3at

n Maximum PoE power: 30 W/port; 450 W per unit

n Ethernet port auto-negotiation or manual configuration

n MDI/MDIX automatic sensing


n Up to 384 MAC addresses and 92 VLAN groups

n VLAN tagging/detagging per Ethernet port

n VLAN stacking (Q-in-Q), VLAN translation, VLAN trunking

n IP ToS/DSCP to 802.1p mapping

n CoS based on VLAN-ID, 802.1p bit, ToS/DSCP

n Marking/remarking of 802.1p



n Upstream broadcast rate limiting and filtering for security control

n L2, L3, L4 Access Control Lists (ACLs)

n 802.1x port-based authentication


DATA SHEETTELLABS® 1100-728GP AND TELLABS® 1100-729GP MULTIDESK/MULTIDWELLING UNIT GPON ONTs


DATA SHEET

TEL9452 11/14

POTS Interface (only available on Tellabs 1100-729GP ONT)n Standard 50-pin connector (RJ-21)

n 5-REN load

n Balanced Ring, 55 V RMS

n DTMF Dialing

n Multiple Codecs:

– G.711 ( -law and A-law)

– G.729 (A and B)

– G.723.1

n Echo Cancellation

n Voice Activity Detection (VAD) and Comfort Noise Insertion

n SIP (RFC-3261)

n SDP (RFC-2327)

n RTP (RFC3550/3551)

n DTMF encoding by RELAY or IN-BAND method

n Full CLASS service support — caller ID, call waiting, call forwarding, call transfer, call toggle, three-way calling, distinctive ringing and more

n G.711 for Fax, modem connection and TTY devices

n T.38/T.30 Fax

n Configurable dial plan

n Country-specific ring tone generation

n DHCP client or static IP configurations

LED Indicatorsn Power

n Optical Signal

n Alarm

n POTS

n POE

n Individual LAN port speed indication

Operations, Administration and Maintenance (OAM)n Standards-compliant OMCI as defined by

ITU-T G.984.4 and G.983.2

n Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get and Get Next commands

n Provisioning for all services, including Ethernet, VoIP, etc.





Tellabs 728GP ONT n Order part number 81.16G-728GP00B-R6

Tellabs 729GP ONT n Order part number 81.16G-729GP0PB-R6


+1 800 690 2324 +1 630 798 9900 www.tellabs.com



TELLABS DATA SHEET


Overview The Tellabs® 1131 Optical Line Terminal provides a small form-factor OLT for low-density enterprise LAN deployments. It is ideal for replicating the benefits of Tellabs® Optical LAN solution into regional offices, smaller schools, boutique hotels/resorts, healthcare clinics, physician offices and small enterprise facilities. It is the smart choice for serving modern voice, video, data, wireless access, access control, security, surveillance, building environmental and building automation in high-performance enterprise LAN. The slim Tellabs 1131 OLT is equipped with both Ethernet network uplinks and G-PON service ports supporting all of Tellabs Optical Network Terminals (ONTs) in a cost-effective low-energy and space-savings means [Table 1].

Tellabs 1131 OLT

Height 1.75"/1 RU

Width 17.7"

Depth 13"

Fans Integrated (5)

Power Source Integrated rectifier

Switching capacity 200 Gbps

Total G-PON ports 4

Total ONTs served Up to 128

Total PON Ethernet ports Up to 512

10 GbE network interfaces 2

1 GbE network interfaces 4

Table 1: Tellabs 1131 OLT quick reference

IP/Ethernet InterfaceThe sleek Tellabs 1131 OLT comes equipped with four Gigabit Ethernet and two 10 Gigabit Ethernet network uplink interfaces. These 1 GbE and 10 GbE ports are integral to the Ethernet switching fabric, common control and timing mechanism of the Tellabs 1131 OLT. This allows for efficient delivery of modern enterprise services and applications (both IPv4 and IPv6), including the management of subtended powered devices (e.g., VoIP phones, Wi-Fi WAPs, IP cameras). Quality of Service (QoS) is provided through traffic segmentation/classification, rate limiting (shaping), queue management (buffering) and scheduling (policing). High availability is also provided via Link Aggregation (LAG) and Rapid Spanning Tree Protocol (RSTP) for dual homing to core routers. Advanced security is maintained through the regimented support of Network Access Control (NAC), IEEE 802.1x, RADIUS, MAC Authentication Bypass (MAB, Dynamic ARP Inspection (DAI) and DHCP. Additional security functions include Access Control List (ACLs) implemented at Layer-2, Layer-3 and Layer-4 triggers.

10 GbE Interfacen Quantity: 2

n Connectors: XFP based

n XFPs are ordered separately

1 GbE Interfacen Quantity: 4

n Connectors: SFP based

n SFPs are ordered separately

Tellabs® 1131 Optical Line Terminal A cost-effective low-energy and space-savings 1 RU OLT for low-density Enterprise LANs

DATA SHEETTELLABS® 1131 OPTICAL LINE TERMINAL


IP/Ethernet Supportn Ethernet — IEEE 802.1

n LLDP/LLDP-MED — IEEE 802.1AB

n Ethernet Bridging — IEEE 802.1ad

n Connectivity Fault Management — IEEE 802.1ag

n Link Aggregation — IEEE 802.1AX

n MAC Bridging Standard — IEEE 802.1D

n Rapid Spanning Tree Protocol (RSTP) — IEEE 802.1D

n Traffic Classification — IEEE 802.1p

n Virtual LANs — IEEE 802.1Q

n VLAN by protocol/by port — IEEE 802.1v

n Port-based Network Access Control — IEEE 802.1X

n Flow Control — IEEE 802.3x

n Link Aggregation Protocol — IEEE 802.3ax

n Link-level OAM — IEEE 802.3ah

n Energy Savings — IEEE 802.3az

n Gigabit Ethernet — IEEE 802.3z

n 10 Gigabit Ethernet — IEEE 802.3ae

n Timing over Packet (ToP) — IEEE 1588

n IGMPv2 Snooping and Proxy — RFC 2236

n IGMPv3 Snooping and Proxy — RFC 3376

n Priority Queuing — RFC 1046

n Weighted Fair Queuing — RFC 3662

n SIP — RFC 3261

n SDP — RFC 2327

n RTP — RFC 3350/3551

n Endpoint Discovery (MED) — ANSI/TIA-1057

n IPv4 and IPv6n Syslog - RFC 5424

n Dynamic ARP Inspection (DAI)

n MAC Authentication Bypass (MAB)

Passive Optical Network InterfaceThe Tellabs 1131 OLT is compliant with the ITU-T G.984 standard, based on the recommendations of the Full Service Access Network (FSAN) committee. It delivers both IP video (all types of enterprise video) and can be deployed in conjunction with RF overlay video. Tellabs 1131 OLT provides efficient delivery of IP voice, unified communications and analog POTS voice services. Relative to data services, it is ideal for serving wireless access, access control, security, surveillance, building environmental and building automation endpoints from Tellabs ONTs. It supports Ethernet-centric G-PON Encapsulation Mode (GEM), highly reliable Forward Error Correction (FEC), support secure

transmission with Advanced Encryption Standard (AES) and Dynamic Bandwidth Allocation (DBA). The Tellabs 1131 OLT supports extended optical reach as far as 18.5 miles (30 km). It also supports fiber route diversity and geographically dispersed OLTs with FSAN-based Type-B PON redundancy. It fully interoperates with all of Tellabs G-PON ONTs, including desktop, in-wall, in-cubicle and telecom closet-based ONTs.

G-PON Interface n Quantity: 4

n Connectors: ships with 4 SC/UPC G-PON SFPs

n Optical budget: 28 dB (G.984 Class B+)

n Maximum reach: 18.5 mi/30 km (split ratio 1:16)

n Maximum split ratio 1:32 (reach 12.5 mi/20 km)

n Wavelength downstream: 1490 nm ± 10 nm

n Wavelength upstream: 1310 nm ± 50 nm

n Downstream: 2.488 Gbps

n Upstream: 1.244 Gbps

G-PON Supportn Compliant with the ITU-T G.984 standard, based on the

recommendations of Full Service Access Network (FSAN)

n Compliant with the ITU-T G.988 OMCI standard

n Delivers both IP video (all types of enterprise video) and RF overlay video

n Efficient delivery of both IP voice and Analog POTS voice

n Data transport, including wireless access, access control, security, surveillance, building environmental and building automation

n Supports Transparent LAN Services (TLS) to the ONT

n Ethernet-centric G-PON Encapsulation Mode (GEM)

n Multiple T-CONTs and GEM ports per device


n Flexible mapping between GEM ports and T-CONT with priority queue-based scheduling

n Activation with automatic discovered Serial Number (SN) and password

n AES-128 Decryption with key generation and switching with 60-second key re-generation


n Highly reliable Forward Error Correction (FEC)

n Secures transmission with Advanced Encryption Standard (AES)

n Dynamic Bandwidth Allocation (DBA)

n Extended optical reach as far as 18.5 miles (30 km)

n Fiber route diversity and geographically dispersed OLTs with Type-B PON redundancy

DATA SHEETTELLABS® 1131 OPTICAL LINE TERMINAL


DATA SHEET

TEL0010 10/15

General Specifications

Dimensionsn Height: 1.75 in/4.4 cm

n Width: 17.7 in/45 cm

n Depth: 13 in/33.3 cm

Weightn 15 lb/6.8 kg

Capacityn 200 Gbps switch fabric

Powern Input: redundant 100/240 VAC

n Consumption Max: 240 W

n Max Draw: 5 A

n Ships with AC power cord

Timingn No timing support for fax or

modem traffic

Environmentaln Environmentally hardened for remote

deployments in areas with no air conditioning or heating

n Temperature: -40° F/-40° C to +149° F / +65° C


n Altitude: -200 ft/-61 m to +10,000 ft/+3 km

Fann 5 Optical Fan Assemblies (OFA1)

n Horizontal discharge (front/rear to right)

Mountingn 19-in or 23-in rack


Tellabs 1131 OLT n Order part number 81.11S-1131-10G-R5

n Minimum base software SR29

n Ships with 4 SC/UPC G-PON SFPs

n 1 GbE SFPs and 10 GbE XFPs are ordered separately

SFP and XFP OptionsSmall Form-factor Pluggable (SFP) Optionsn Part Number = 128211

– 1000Base-SX with LC/MM connector

– 850nm with up to 550 meter reach

n Part Number = C.11T-S1GBELX1131S

– 1000 Base-SX and LC/SM connector

– 1310nm and 10 kilometer reach

n Part Number = 81.11T-S1GB40KM-R6

– 1000 Base-LX and LC/SM connector

– 1310nm and 40 kilometer reach

n Part Number = C.11T-S1GBER450030

– 1000 Base-T and RJ-45

– Up to 100 meters reach

10 Gigabit Form-factor Pluggable (XFP) Optionsn Part Number = C.11T-XO192SR1851M

– 10GbE with LC/MM connector

– 850nm with up to 550 meter reach

n Part Number = 4195098

– 10GbE with LC/SM connector

– 1310nm with up to 10 kilometer reach

n Part Number = C.11T-8800-XFP-IR2

– 10GbE with LC/SM connector

– 1550nm with up to 40 kilometer reach

Software Optionsn Base Software

– 81.SR290BASE1131

n Advance Security

– 81.SR290AS1131

n Advance Availability

– N/A

n Advance Operations

– 81.SR290AO1131

For more information, please contact your local Tellabs sales representative or local Tellabs sales office at the phone numbers provided below, or visit www.tellabs.com.


+1 800 690 2324 +1 630 798 9900 www.tellabs.com



TELLABS DATA SHEET


Overview The goal of the Tellabs® 1100 Series is to optimize capital expenditures, energy consumption and space requirements wherever possible. To accomplish that end goal, Tellabs provides four different distribution shelves that best match the total number of IP/Ethernet end points desired and power utilization, and minimize the physical space required within the data communications closet. This is accomplished with the following four IP/Ethernet-centric Optical Line Terminal (OLT) distribution shelves:

n Tellabs 1150 OLT — high-density 23"-wide shelf

n Tellabs 1150E OLT — mid-to-high density 19"-wide shelf

n Tellabs 1134 OLT — low-density 19"-wide shelf

n Tellabs 1134AC OLT — low-density 19"-wide shelf with integrated AC to DC rectifier

n Tellabs 1131 OLT — for more information, see Tellabs 1131 OLT (81.11S-1131-10G-R5) data sheet

All four of these OLT distribution shelves support common software and common hardware. They provide options for multiple 10 GbE and 1 GbE Ethernet uplinks. Each can be equipped with G-PON, Ethernet, ADSL2+ and VDSL2 service cards, supporting both Passive Optical LAN and Multiservice Access architectures. Ultimately, these shelves are built to serve voice, video, data, wireless access, building security, building surveillance and building automation end points.

Physical Attributes Whether serving 200 Gigabit IP/Ethernet end points or serving 8,000 Gigabit IP/Ethernet end points, Tellabs can provide the right-size distribution shelf for the lowest first cost CapEx, on-going OpEx, energy use and space required (Table 1).

Tellabs® 1100 Series Optical Line Terminals (OLTs)

Table 1: 1150, 1150E, 1134 and 1134AC Quick Reference

*Shelf and slot capacity calculated based on shelf being equipped with next generation ESU and next generation 10G XG-PON service module

Variety of OLT sizes for right-size density, least energy and rack space usage

Tellabs 1150 OLT Tellabs 1150E OLT Tellabs 1134 OLT Tellabs 1134AC OLT

Height 15.75"/9 RU 15.75"/9 RU 6"/4 RU 6"/4 RU

Width 23" 19" 19" 19"

Depth 12" 12" 12" 16"

Fan (2 per 1150 and 1150E) 3.50"/2 RU 3.50"/2 RU Integrated Integrated

Power Source External rectifier External rectifier External rectifier Integrated rectifier

Multiservice slots 16 14 4 4

Shelf backplane capacity* 1.28 Tbps* 1.12 Tbps* 320 Gbps* 320 Gbps*

Bandwidth slot capacity 80 Gbps* 80 Gbps* 80 Gbps* 80 Gbps*

Total G-PON ports 64 56 16 16

Total ONTs served Up to 2,048 Up to 1,792 Up to 512 Up to 512

Total Ethernet ports served Up to 8,192 Up to 7,168 Up to 2,048 Up to 2,048

Ethernet Switch Unit slots 2 2 2 2

10 GbE interfaces (with dual ESUs) 4 4 ESU32 = 4 ESU32 = 4

1 GbE interfaces (with dual ESUs) 8 8 ESU30 = 12 ESU32 = 8

ESU30 = 12 ESU32 = 8

DATA SHEETTELLABS® 1100 SERIES OPTICAL LINE TERMINALS (OLTs)


These Tellabs OLTs equipped with network uplinks, service modules and Optical Network Terminals (ONTs) support flexible service delivery models (e.g., bridged or private VLAN), strict quality of service (e.g., rate shaping, VLAN trunking and priority, dynamic bandwidth allocation (DBA), Type-B PON protection (at ports, modules or OLTs), advanced security (e.g., ACLs, ingress broadcast rate limiting, AES) and strong authentication mechanisms (e.g., NAC, 802.1x, RADIUS, DHCP).

Features and Benefits

Tellabs® 1150 OLT (23") distribution shelf The Tellabs 1150 distribution shelf is designed for high-density deployments (Figure 1). The Tellabs 1150 is well suited to support Optical LAN, Fiber to the Premises and Multiservice Access. Voice, video and data services can be delivered from this distribution shelf. It also supports voice, delivering both IP PBX, application servers and unified communications systems, and it can support TDM analog voice when bundled with Tellabs® 1000 Voice Gateway. For video delivery, the Tellabs 1150 can be deployed in IP video and RF video configurations within telecom service provider, commercial enterprise, government, healthcare, education and hospitality markets — this is true for all four of the Tellabs OLT distribution shelves.

The Tellabs 1150 can be equipped with Ethernet Switch Unit Two (ESU2). ESU2 provides a nonblocking 184 Gbps switch fabric, two 10 GbE XFP-based and four 1 GbE SFP-based IP/Ethernet interfaces. This ESU can be deployed redundantly for highest resiliency and reliability. System timing is controlled by redundant Timing Distribution Unit (TDU) cards in the Tellabs 1150 shelf. An Alarm Maintenance Unit (AMU) provides alarm collection, alarm reporting, visual alarms and alarm audible functions.

Tellabs® 1150E OLT (19") distribution shelf The Tellabs 1150E supports common software and common hardware with the Tellabs 1150. The Tellabs 1150E distribution shelf is built for high-density enterprise and international needs (Figure 2). In both enterprise and international deployments, 19" racks are expected within the data communication center. With voice service being delivered directly from IP PBX, application servers and unified communications systems, the Tellabs 1150E is targeted for pure VoIP, IP video and IP/Ethernet data service delivery. The Tellabs 1150E supports ESU2 equipped in simplex or duplex for high availability.

Tellabs® 1134 OLT distribution shelf The Tellabs 1134 supports common software and common service cards with the Tellabs 1150 and Tellabs 1150E. The Tellabs 1134 distribution shelf is designed for lower-density enterprise and international deployments (Figure 3). Furthermore, with its smaller form-factor, the Tellabs 1134 shelf is ideal for space-challenged installation in data center, communications closets and outdoor remote cabinets. The Tellabs 1134 can be equipped with the ESU30 and ESU32.

Tellabs® 1134AC OLT distribution shelf The Tellabs 1134AC adds a redundant AC to DC power rectifier integrated with the distribution shelf, resulting in faster installations (Figure 4). By integrating the power rectification, the time and material needed to install this distribution shelf are significantly reduced. Just like the other three Tellabs OLT distribution shelves, this Tellabs 1134AC leverages common software and common service cards. The Tellabs 1134 can be equipped with the ESU30 and ESU32

Tellabs® 1131 OLT It should be noted that the one rack unit Tellabs 1131 OLT comes equipped with two 10G and four 1G network interfaces and four G-PON service interfaces. For more information about the Tellabs 1131 OLT, please review its specific data sheet.



Tellabs® 1150 (23") Specifications

Dimensions n Height: 15.75 in/40.00 cm

n Width: 23 in/58.42 cm


Weight n 41.55 lb/18.84 kg

Capacity n 1.28 Tbps* backplane

n 80 Gbps* per multiservice slot

Power n Dual -48 V power feeds

n Total input power 1600 W

n Max draw 26.5 A @ -48 VDC

Timing n Composite clock input

n Timing over Packet (ToP)

n Network Time Protocol (NTP)

n Equip with redundant TDU (for analog voice/fax/modem)

Alarming n Equip with AMU for dry relay

contact inputs

Environmental n Temperature: -40°F/-40°C to

+158°F/+70°C



Fan n 1 RU 23" Fan Tray Assembly

n 1600 CFM

n Vertical discharge

Mounting n 23" rack

Cable management n Horizontal fiber tray & guides

Tellabs® 1150E (19") Specifications

Dimensions n Height: 15.75 in/40.00 cm



Weight n 32.35 lb/14.67 kg

Capacity n 1.12 Tbps* backplane




n Max draw 23 A @ -48 VDC

Timing n No timing support for fax or

modem traffic

Alarming n No dry relay contact inputs


+158°F/+70°C



Fan n 1 RU 19" Fan Tray Assembly

n 1100 CFM

n Vertical discharge

Mounting n 19" or 23" rack

Cable management n Horizontal fiber tray & guides

Tellabs® 1134 Specifications

Dimensions n Height: 6 in/15.24 cm



Weight n 21 lb/9.52 kg

Capacity n 320 Gbps* backplane




n Max draw 10 A @ -48 VDC


modem traffic

Alarming n Eight (8) dry relay contact

inputs


+158°F/+70°C



Fan n Integrated

n 950 CFM

n Horizontal discharge


Cable management n Cable guides on right side

Tellabs® 1134AC Specifications

Dimensions n Height: 6 in/15.24 cm



Weight n 28 lb/12.70 kg

Capacity n 320 Gbps* backplane


Power n Dual power 100-240 VAC


n Max draw 6.0 Amps


modem traffic

Alarming n Eight (8) dry relay

contact inputs


+158°F/+70°C



Fan n Integrated

n 950 CFM

n Horizontal discharge


Cable management n Cable guides on right side

Figure 1: Tellabs 1150 OLT Figure 2: Tellabs 1150E OLT Figure 3: Tellabs 1134 OLT Figure 4: Tellabs 1134AC OLT

* Shelf and slot capacity calculated based on shelf being equipped with next generation ESU and next generation 10G XG-PON service module



DATA SHEET

Compliance and Safety All distribution shelves meet the following compliance and safety requirements:

n NEBS Level 3 compliant

n Department of Defense Joint Interoperability Test Command (JITC)

n FCC Part 15 Class A

n UL 60950

n NEC 2002

n ANSI 319

n SR-3580 Issue 1

n GR-63 Issue 2

n GR-78-CORE Issue 1



n GR-487 Issue 2


n GR-1089 Issue 3


Tellabs® 1150 OLT n Tellabs 1150 distribution shelf,

order part number — 4125053

n Tellabs 1150 1 RU fan tray and power cable, order part number — 4195091

Tellabs® 1150E OLT n Tellabs 1150E distribution shelf,


n Tellabs 1150E 1 RU fan tray and power cable, order part number — 4125073

Tellabs® 1134 OLT n Tellabs 1134 distribution shelf,


n Tellabs 1134 fan assembly (OFA1), order part number — 4115094

Tellabs® 1134AC OLT n Tellabs 1134AC distribution shelf,

order part number — 81.11K-1134ACSH-R5

n Tellabs 1134AC power rectifier, order part number — 81.11P-1134ACPW-R6

n Tellabs 1134 fan assembly (OFA1), order part number — 4115094

Tellabs® 1131 OLT n Tellabs 1131 OLT, order part number — 81.11S-1131-10G-R5

For more information, see Tellabs 1131 OLT data sheet.

For more information, please contact your local Tellabs sales representative or local Tellabs sales office at the phone numbers provided below, or visit www.tellabs.com.

TEL9968 12/15© 2015, Tellabs Access, LLC. All rights reserved.

+1 800 690 2324 +1 630 798 9900 www.tellabs.com



Documents

Tellabs 100 Series Mini Optical Network Terminals (ONTs)oristel.com.sg/wp-content/uploads/2016/05/Tellabs_Datasheet.pdf · TELLABS™ 100 SERIES MINI OPTICAL NETWORK TERMINALS (ONT