412-01-1 412-01-1Climate Control

REMOVAL AND INSTALLATION

4. NOTE: The upper RH temperature blend doorTemperature Blend Door Actuator —actuator screw can be removed using a shallowRH, EATC1/4-inch drive swivel-type socket and extension.

Working through the glove compartmentopening, remove the upper RH temperatureblend door actuator screw.

Item Part Number Description

1 — RH temperature blend dooractuator electrical connector(part of 14401)

5. Remove the 2 remaining RH temperature blend2 W701696 RH temperature blend doordoor actuator screws.actuator screw (3 required)

3 19E616 RH temperature blend door6. Remove the RH temperature blend dooractuator

actuator.Removal and Installation

7. To install, reverse the removal procedure.

1. Remove the RH floor console finish panel.

2. Lower the glove compartment.

3. Disconnect the RH temperature blend dooractuator electrical connector.

Copyright 2007, Ford Motor CompanyLast updated: 5/15/2009 2008 Explorer, Mountaineer, Explorer Sport Trac, 7/2007