Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Tender Document
for
Design, Supply, Installation, Testing and Commissioning,
Operation & Maintenance of 90 Nos of 30W LED based
Solar Street Lighting Systems at Talaricheruvu Ultra
Mega Solar Park in Ananthapuramu District.
NAME OF THE SUPPLIER / MANUFACTURER: ----------------------------------------------
-
Registration No: ______ / 2019-20
Tender Notice No:
NREDCAP/SE/SPV SSL/ATP/08/2019-20
Dated: 09.10.2019.
NEW AND RENEWABLE ENERGY DEVELOPMENT CORPORATION OF A.P Ltd
(NREDCAP)
Regd Office: 12-464/5/1, River Oaks Apartments,
CSR Kalyana Mandapam Road, Tadepalli,
GUNTUR DISTRICT- 522 501
TEL: 0863-2347650/51/52/53
Website: www.nredcap.in
http://www.nredcap.in/
INDEX
1. Tender Notice ……………………. 3
2. Scope of works…………………… 4
3. Pre Requisites for participation….. 6
4. General Conditions……………… 7
5. Profile of Suppliers/Manufacturers……. 9
6. MNRE Specifications and Component wise Technical Details for 30W LED based Solar Street Lighting Systems… 10
7. Annexure – A 14
8. Annexure – B 15
2
TENDER NOTICE
S.No Particulars Details
1 Tender Notice No NREDCAP/SE/SPV SSL/ATP/08/2019-20, dated:
09.10.2019.
2 Scope of the work
Design, Supply, Installation, Testing and
Commissioning, Operation & Maintenance of 90
Nos of 30W LED based Solar Street Lighting
Systems at Talaricheruvu Ultra Mega Solar Park in
Ananthapuramu District.
3 Estimated Contract Value
(Approximately) Rs. 67,66,920.00
4 Period of Contract 3 months
5 Eligibility for participation
Registered / Renewed Suppliers & Manufacturers
with NREDCAP for the year 2019-20 as
“SPV Solar System Integrators” up to 30.09.2019
6 Processing fee of Tender
Document
Rs. 25,000/- + 4,500/- ( GST @ 18%) =
Rs. 29,500/-
7 Bid Security ( EMD)
Rs. 75,000.00 (Rupees Seventy five thousand only)
by way of Demand Draft drawn in favour of
NREDCAP, payable at Tadepalli.
8 Last Date & Time for
Submission of sealed Tenders 23.10.2019, 13:00 hrs
9 Date & Time for Opening of
Technical Bids 23.10.2019, 15:00 hrs
NOTE:
1. The Tender Document can be downloaded from http://www.nredcap.in and the processing
fee of tender document shall be enclosed by way of demand draft for Rs: 29,500/- in
favour of NREDCAP payable at Tadepalli, which is not refundable.
2. The Financial Bids of Technically qualified Bidders will only be opened.
3. The Valid NSIC certificate holders are exempted from payment of EMD amount. The
copy of the valid NSIC certificate shall be enclosed to the Tender document.
VC & Managing Director
NREDCAP, Tadepalli
3
http://www.nredcap.in/
SCOPE OF THE WORKS
Design, Supply, Installation, Testing, Commissioning and Operation & Maintenance of 90
Nos of 30W capacity LED based Solar Street Light systems consisting of the following.
a) LED Luminary: 30 W LED luminary with inbuilt charge controller to operate dusk
to dawn and with 2 core, 2.5 Sq mm copper cable of required length.
b) Solar PV Module: 12V/150Wp (any IEC/BIS Certified make) along with suitable
Solar PV module support Structure (Powder coated).
c) Battery: 12.8V / 96Ah Lithium Ferro Phosphate (LiFePO4) Battery (any IEC/UL
certified make) separately mounted in battery box.
d) Battery Box: 250X250X200 mm of 2 mm thick battery box (Powder coated) with
reinforcement as required to house the above battery along with fixing arrangement
to GI pole.
e) GI Octagonal Pole: 7 meters of length, 3 mm thick (130 mm dia at bottom and 70
mm dia at top with minimum Galvanizing of 85 microns on hot dip Galvanizing
process) along with suitable Luminary arm to fix luminary.
f) J Bolts & Base plate: GI J bolts of dia 20 mm X600 mm length along with suitable
base plate for making foundation to the GI Octagonal pole are to be supplied by the
selected bidder.
g) Accessories:
i) Hard ware such as GI Nut & Bolts (M10x90, M10x50 & M10x20) and SS Nut &
Bolts (M6), for fixing Solar PV module and Battery box and Luminary arm as
required.
ii) 2.5 Sq sq.mm copper lugs (Ring type).
h) Civil Foundation: All the Civil Foundations will be laid down by APSPCL as
per the design and specifications at their cost. The foundation shall be RCC pile
foundation in CC(1:2:4). The soil stratum at work location is mostly hard rock
covered with ordinary gravel and mixture of soft rock at varying depths. The
foundation shall be cast by drilling 300 mm dia bore hole of minimum depth of 1.3
m below the OGL, laying of RCC (1:2:4) with 6 No’s 10 mm dia main
reinforcement and 8 mm dia stirrups at 250 mm c/c after inserting the G.I J bolts in
position with the help of base plate.
Signature of the Tenderer with seal
4
i) Operation & Maintenance: All the street lighting system (including the battery)
will be warranted for a period of five years from the date of completion of work.
The APSPCL will take over the Street lighting systems after successful
commissioning.
Galvanisation:
i) Structure shall be galvanized properly to avoid resting and the work shall be carried
out as per IS-2629 and IS-4759.
ii) The minimum Galvanization thickness shall be 85 microns (610 gsm).
Testing and Inspection:
i) The Testing and Inspection shall be carried out as per relevant Indian Standards.
ii) The firm shall submit test reports for the materials procured by them from the MNRE
authorized test centers for observation and its record.
Transport and Storage:
i) The materials shall be transported to Talaricheruvu site and shall be stocked.
ii) Every care shall be taken to prevent damage during loading, transportation and unloading.
Mode of payment: The payment shall be made as follows.
a) 90% Cost of the Solar Street Lighting Systems installed will be released by APSPCL
based on the certified bills from NREDCAP along with completion and handing over
documents in the prescribed formats.
b) The balance 10% Performance Guarantee amount will be released by APSPCL after
successful completion of 5 years of operation & maintenance period from the date of
installation (or) against submission of Bank guarantee for 10% of the value of the
work order for a period of 5 years with a claim of period of 6 months.
c) The firm shall pay 2.5% of value of contract towards security deposit at the time of
award of contract for due fulfillment of the contract and the security deposit will be
released after successful completion of the work.
Signature of the Tenderer with seal
5
Pre-Requisites for submission of Tenders for Design, Supply, Installation, Testing and
Commissioning, Operation & Maintenance of 90 Nos of 30W LED based Solar Street
Lighting Systems at Talaricheruvu Ultra Mega Solar Park in Ananthapuramu District
Tenders are invited for Supply, Testing & installation of 90 Nos of 30W LED based Solar
Street Lighting Systems at Talaricheruvu Ultra Mega Solar Park in Ananthapuramu District
from the Registered / Renewed Suppliers & Manufacturers with NREDCAP for the year
2019-20 as “SPV Solar System Integrators” up to 30.09.2019.
The Tenderers shall fulfill the following eligible criteria and submit the necessary
documentary proofs along with Tender document.
1. The Supplier’s & Manufacturer’s shall have valid Test Certificates for all products /
Components from MNRE or any other MNRE authorized Test Centers to install Solar
Street Lighting Systems as per MNRE Specifications.
2. The Suppliers & Manufacturers shall have experience in installation of at least 30 Nos
of 9W / 18W LED based Solar Street Lighting Systems with NREDCAP or any of the
Govt. Nodal Agencies in the country (submit the attested experience certificates)
during the last two years 2017-18 & 2018-19.
3. Supply of one sample piece of 30W LED based Solar Street Lighting System as per
Tender Specifications is mandatory.
4. The Suppliers & Manufacturers cumulative turnover shall not be less than Rs: 3.00
Crores (Rupees Three Crores only) during last two years i.e., 2017-18 and 2018-19.
(Attach balance sheets from certified Chartered Accountant).
5. The Suppliers & Manufacturers have not been black listed at any time by NREDCAP
as well as any of the Govt. Nodal Agencies in the country.
6. The Bidder who submits the tender without satisfying or deviating the above
conditions will be rejected duly forfeiting the EMD amount.
Signature of the Tenderer with seal
6
GENERAL CODITIONS OF THE TENDER DOCUMENT
1. The rates are inclusive of all latest prevailing taxes and duties etc., of Govt. of Andhra
Pradesh as well as Govt. of India. The rates quoted shall also be inclusive of
transportation, Installation & Commissioning charges and exclusive of cost of civil
foundations of the solar street lighting systems and to be submitted in the enclosed
format of Annexure – B.
2. All the Solar Street Lightings Systems are to be supplied, installed & commissioned
as per the directions of NREDCAP within 45 days from the date of work order.
3. The filled in Tender document duly signed on each page has to be submitted along
with EMD amount of Rs. 75,000.00 (Rupees Seventy five thousand only) by way of
Demand Draft in favour of “NREDCAP” Payable at Tadepalli. In case of
unsuccessful bidder, the EMD amount will be refunded immediately after finalization
of the Tender.
4. The successful bidder shall pay the Security Deposit amount of 2.5% of the work
order value and will be released on successful completion of the works awarded.
5. The filled in Tender document with all enclosures should be submitted in a sealed
cover super scribing “Tender for 90 Nos of 30W LED based Solar Street Lighting
Systems at Talaricheruvu Ultra Mega Solar Park in Ananthapuramu District”
for Technical & Financial bid separately.
6. Good quality components shall be supplied. In case if it is found that materials are not
as per MNRE Specifications, such components are to be replaced at your cost.
7. The entire Solar Street Lighting Systems including Battery should be under guarantee
/ warranty for a period of Five years from the date of commissioning against all
defects.
8. All the SPV Modules irrespective of the capacity shall have RFID tags fixed inside /
outside and it should with stand local weather conditions.
9. After completion of installation & commissioning, the supplier / manufacturer has to
submit the Installation, Commissioning & handing over documents report containing
the details of the components installed, layout diagrams etc., The copies of the test
certificates for SPV Modules, LED Luminary, Batteries etc are also to be submitted.
Signature of the Tenderer with seal
7
10. The selected bidder should establish service centre at the site for regular operation &
maintenance during the warranty period of 5 years from the date of installation.
11. The Supply, Installation & Commissioning of Solar Street Lighting Systems will be
awarded to the bidder who quoted at L1 price which excludes the cost of civil
foundations (APSPCL will laid down all civil foundations as per design and
specifications).
12. The bills are to be raised in favour of Managing Director, APSPCL by suppliers /
manufacturers with GST number as per GST Act in force w.e.f. 01.07.2017 and
submit in triplicate after duly handing over the systems to APSPCL.
13. The 90% of the invoice value for the Solar Street Lighting Systems installed will be
released by APSPCL based on the certificate from NREDCAP along with completion
and handing over documents in the prescribed formats.
14. The balance 10% Performance Guarantee amount will be released by APSPCL after
successful completion of 5 years of operation & maintenance period from the date of
installation (or) against submission of Bank guarantee for 10% of the value of the
work order for a period of 5 years with a claim period of 6 months.
15. NREDCAP reserves the right to cancel the order partially or fully in case the material
supplied are substandard / delay in progress of the works without any notice and
forfeit the Security Deposit. All the disputes arises regarding this tender will be settled
under area of jurisdiction of NREDCAP, Amaravati only.
16. For the delayed installation beyond the stipulated period, penalty @1% on the cost of
the systems per week will be levied subject to the maximum of 5%. For valid reasons,
if the supplier is not able to supply the systems within the time prescribed, the VC &
Managing Director, NREDCAP, on receipt representation from the supplier prior to
due date, may grant extension of time. If the work is not completed within one month
beyond scheduled date, the entire work will be cancelled and the Security Deposit will
be forfeited.
17. The VC & Managing Director, NREDCAP may relax any of the conditions for valid
reasons and the decision of VC & Managing Director is final and binding.
Signature of the Tenderer with seal
8
PROFILE OF SUPPLIERS / MANUFACTURERS
S.No Particulars Details
1 Name of the Tenderer
2 Postal Address
3 Email address for communication
4 Telephone, Fax No:
5 Name, designation & Contact number of
the representative of the Tenderer.
6
Nature of the firm (Individual
Partnership/Pvt. Ltd/ Public Ltd., Co.
/Public Sector etc.,)
7 Amount paid towards Tender processing
fee with details
8 Amount paid towards Earnest money
deposited with details
9
Cumulative Turnover for last Two
financial years 2017-18 & 2018-19
(Attach balance sheets from certified
Chartered Accountant)
2017-18
(Rs) 2018-19
(Rs) Total
(Rs)
10 PAN Number, GST Number along with
Registration details
(evidences are to be attached)
11
Details of Test Certificate(s) issued by
MNRE/MNRE authorized test centers.
a. Name of the Test Center b. Valid Test Certificate for the
following components
i) SPV Modules
ii) LED Luminary
iii) Batteries
Signature of the Tenderer with seal
9
TECHNICAL SPECIFICAIONS OF 30W CAPACITY LED BASED SOLAR STREET
LIGHTING SYSTEMS AT TALARICHERUVU ULTRA MEGA SOLAR PARK IN
ANANTHAPURAMU DISTRICT
Location of site Talaricheruvu Ultra Mega Solar Park, Ananthapuramu District
SPV modules Capacity 12V/150Wp (any IEC/BIS Certified make) along with suitable Solar
PV module support Structure (Powder coated).
Battery
Battery Type / make Lithium Ferro Phosphate (LiFePO4) Battery (any IEC/UL certified
make) separately mounted in battery box
Battery voltage &
Capacity 12.8 V / 96 Ah
Battery Box
250X250X200 mm of 2 mm thick battery box (powder coated) with
reinforcement as required to house the above battery along with
fixing arrangement to GI Pole
LED Luminary 30W LED luminary with inbuilt charge controller to operate dusk to
dawn and with 2 core, 2.5 Sq mm copper cable of required length
GI Octagonal Pole
7 meters of length, 3 mm thick (130 mm dia at bottom and 70 mm dia
at top with minimum Galvanizing of 85 microns on hot dip
Galvanizing process) along with suitable Luminary arm to fix
luminary.
J Bolts & Base Plate GI J bolts of dia 20 mm X600 mm length along with base plate for
making foundation to the GI Octagonal pole.
Accessories
i) Hard ware such as GI Nut & Bolts (M10x90, M10x50 &
M10x20) and SS Nut & Bolts (M6), for fixing Solar PV module and
Battery box and Luminary arm as required.
ii) 2.5 Sq sq.mm copper lugs (Ring type).
Foundation
All the Foundations will be laid down by APSPCL as per the
design and specifications at their cost. The Foundation shall be
RCC pile foundation in CC(1:2:4). The soil stratum at work location
is mostly hard rock covered with ordinary gravel and mixture of soft
rock at varying depths. The foundation shall be cast by drilling 300
mm dia bore hole of minimum depth of 1.3 m below the OGL, laying
of RCC (1:2:4) with 6 No’s 10 mm dia main reinforcement and 8 mm
dia stirrups at 250 mm c/c after inserting the G.I J bolts in position
with the help of base plate.
Maintenance
Operation and Maintenance of 5 years with regular field visit,
replacement of damaged materials, replacement of dead batteries or
any other equipment for effective functioning of solar street lighting
system for five years from the date of completion of work.
Electronics Overall total efficiency of the Electronics should be minimum 90%
Signature of the Tenderer with seal
10
COMPONENT WISE MNRE TECHNICAL DETAILS
PV MODULE:
i. Indigenously manufactured PV module should be used.
ii. The PV module should have crystalline silicon solar cells and must have a certificate
of testing conforming to IEC 61215 Edition II / BIS 14286 from an NABL or IECQ
accredited Laboratory.
iii. The power output of the module(s) under STC should be a minimum of 150 Wp at a
load voltage* of 16.4 ± 0.2 V.
iv. The open circuit voltage* of the PV modules under STC should be at least 21.0 Volts.
v. The module efficiency should not be less than 14 %.
vi. The terminal box on the module should have a provision for opening it for replacing
the cable, if required.
vii. There should be a Name Plate fixed inside the module which will give:
a. Name of the Manufacturer or Distinctive Logo.
b. Model Number
c. Serial Number
d. Year of manufacture
viii. A distinctive serial number starting with NSM will be engraved on the frame of the
module or screen printed on the tedlar sheet of the module.
*The load voltage and Voc conditions of the PV modules are not applicable for the system
having MPPT based charge controller BATTERY:
i. Lithium Ferro Phosphate (LiFePO4) Battery. ii. The battery will have a minimum rating of 12.8V, 96 Ah LiFePO4 Battery.
iii. 85 % of the rated capacity of the battery should be between fully charged and load cut
off conditions. iv. Battery should conform to the latest MNRE/ BIS/ International standards.
LIGHT SOURCE:
i. The light source will be a white LED type.
ii. The colour temperature of white LED used in the system should be in the range of 5500oK–6500oK.
iii. W-LEDs should not emit ultraviolet light.
iv. The light output from the white LED light source should be constant throughout the duty cycle.
Signature of the Tenderer with seal
11
v. The lamps should be housed in an assembly suitable for outdoor use. vi. The temperature of heat sink should not increase more than 20oC above ambient
temperature during the dusk to dawn operation.
ELECTRONICS:
i. The total electronic efficiency should be at least 85%.
ii. Electronics should operate at 12 V and should have temperature compensation for proper charging of the battery throughout the year.
iii. No Load current consumption should be less than 20 mA.
iv. The PV module itself should be used to sense the ambient light level for switching ON and OFF the lamp.
v. The PCB containing the electronics should be capable of solder free installation and replacement.
vi. Necessary lengths of wires/cables, switches suitable for DC use and fuses should be
provided.
ELECTRONIC PROTECTIONS:
i. Adequate protection is to be incorporated under “No Load” conditions e.g. when the lamp is removed and the system is switched ON.
ii. The system should have protection against battery overcharge and deep discharge
conditions. iii. Fuse should be provided to protect against short circuit conditions. iv. Protection for reverse flow of current through the PV module(s) should be provided.
v. Electronics should have temperature compensation for proper charging of the battery
throughout the year. vi. Adequate protection should be provided against battery reverse polarity.
vii. Load reconnect should be provided at 80% of the battery capacity status.
DUTY CYCLE:
Dust to Dawn with Autonomy of 3 days or 36 operating hours per permissible
discharge.
MECHANICAL COMPONENTS:
i. A corrosion resistant metallic frame structure should be fixed on the pole to hold the SPV module.
ii. The frame structure should have provision to adjust its angle of inclination to the
horizontal, so that it can be installed at the specified tilt angle. iii. The pole should be made of Galvanised Iron (GI) pipe.
iv. The height of the pole should be 4 metres above the ground level, after grouting and
final installation.
Signature of the Tenderer with seal
12
v. The pole should have the provision to hold the luminaire.
vi. The lamp housing should be water proof and should be painted with a corrosion resistant paint.
INDICATORS:
(i) The system should have two indicators, green and red.
(ii) The green indicator should indicate the charging under progress and should glow only
when the charging is taking place. It should stop glowing when the battery is fully
charged. (iii) Red indicator should indicate the battery “Load Cut Off” condition.
QUALITY AND WARRANTY:
i. The street lighting system (including the battery) will be warranted for a period of five years from the date of supply.
ii. The PV module(s) will be warranted for a minimum period of 25 years from the date
of supply. The PV modules must be warranted for their output peak watt capacity,
which should not be less than 90% at the end of Ten (10) years and 80% at the end of
Twenty five (25) years.
iii. The Warranty Card to be supplied with the system must contain the details of the system.
OPERATION AND MAINTENANCE MANUAL:
An Operation, Instruction and Maintenance Manual, in English and the local
language, should be provided with the Solar Street Lighting System. The following
minimum details must be provided in the Manual:
(i) Basic principles of Photovoltaics.
(ii) A small write-up (with a block diagram) on Solar Street Lighting System - its
components, PV module, battery, electronics and luminaire and expected
performance.
(iii) Type, Model number, Voltage & capacity of the battery, used in the system.
(iv) The make, model number, country of origin and technical characteristics (including IESNA LM-80 report) of W-LEDs used in the lighting system.
(v) About Charging and Significance of indicators.
(vi) Clear instructions about erection of pole and mounting of PV module (s) and lamp housing assembly on the pole.
(vii) Clear instructions on regular maintenance and trouble shooting of the Solar
Street Lighting System. (viii) DO's and DONT's.
(ix) Name and address of the contact person for repair and maintenance, in case of
non-functionality of the solar street lighting system.
Signature of the Tenderer with seal
13
Annexure – A
TECHNICAL BID
TECHNICAL SPECIFICATIONS FOR 30W LED BASED SOLAR STREET
LIGHTING SYSTEMS AT TALARICHERUVU ULTRA MEGA SOLAR PARK IN
ANANTHAPURAMU DISTRICT
SI. No. Name of the Item Description /Specifications
(make, capacity etc)
1
Solar PV Module(s)
1.Type & make
2.Capacity of each module
3.No. of modules
2
Battery Bank
1.Type & make
2.Capacity and discharge rate
of each battery
3.No. of batteries
3 Light Source Rating
4 GI Pole
5 J-Bolts with base plate
6 Electronics
7 Duty Cycle
8 Autonomy
9 Others
Signature of the Tenderer with seal
14
Annexure-B
FINANCIAL BID
FINANCIAL BID FOR 30W CAPACITY LED BASED SOLAR STREET LIGHTING
SYSTEMS AT TALARICHERUVU ULTRA MEGA SOLAR PARK IN
ANANTHAPURAMU DISTRICT
S.No. Name of the Item Rate (Rs)
(In words)
01
Design, Supply, Installation, Testing and
Commissioning, Operation & Maintenance of 30W LED
based Solar Street Lighting System with the following
components including installation and transportation
charges on Turnkey basis
i) 12V, 150Wp SPV Modules
ii) 30W LED based luminaire
iii) 12.8V, 96 Ah Lithium Ferro Phosphate Battery
(LiFePO4)
iv) 7 mtrs length Octagonal hot dipped galvanized GI
Pole
v) J-Bolts along with base plate for making civil
foundation
vi) Other Electrical & Electronic items
vii) Civil Foundation: The civil foundation will be laid
down by APSPCL as per the design and specifications at
their cost - Need not to Quote.
02 GST @5% on 70% of item no: 01
03 GST @18% on 30% of item no: 01
04
Total – (01+02+03)
Signature of the Tenderer with seal
15