Embed Size (px)
Citation preview
Presse Infromation
We measure the resources of our world
Tender documents For oval gear meters
1. IOG® series
1.1 Description
1.2 Operation principle
1.3 Features
2. Models
2.1 IOG® 1/8”
2.2 IOG® 1/4” LF
2.3 IOG® 1/4”
2.4 IOG® 1/2”
2.5 IOG® 3/4”
2.6 IOG® 1”
2.7 IOG® 1” HF
2.8 IOG® 1 ½”
2.9 IOG® 2”
2.10 IOG® 3”
Content
Presse Infromation
1. IOG® series
1.1 Description
The industrial oval gear meter is a modular flow meter design, economical yet highly accurate and rugged. Due to the rugged nature of this particular flow measurement technology, the meter can be used in a number of applications where conventional meters are not acceptable. 1.2 Operation principle
Fluid enters the inlet port and then passes through the metering chamber. Inside the chamber, fluid forces the internal gears to rotate before exiting through the outlet port. Each rotation of the gears displaces a specific volume of fluid. As the gears rotate, a magnet on each end of the gear pass a reed switch in the top-mounted register’s circuit board. The reed switches send pulses to the microprocessor in the register to change the LED display segments. The oval gear meter can be used in conjunction with a variety of industrial registers.
1.3 Features
• High accuracy and repeatability • Insensitive to viscosity change – Maintains accuracy • Not affected by pulsating flows • Can be mounted in tight pipe-work and any orientation • Most industrial communications and outputs available • Custom options available • ATEX approval, FDA conformity
Presse Infromation
2. Models
2.1 IOG® 1/8”
Nominal size: 1/8" (DN6) Flow range: 1,0 – 50 l/h ( 0,0044 – 0,22 US GPM) Body material: Stainless steel 316 Rotor material: Stainless steel 316 Pulser/displays (code): 2 pulse outputs / 1 reed / 1 hall (approx. 4400 PPL) Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.2 IOG® 1/4” LF
Nominal size: 1/4" (DN8) Flow range: 2,4 – 100 l/h ( 0,009 – 0,44 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): 2 pulse outputs / 1 reed / 1 hall (approx. 2170 PPL) Remote display (code): …………………………………………………. Connection type: …………………………………………………. Seals: …………………………………………………. Options: ………………………………………………….
2.3 IOG® 1/4”
Nominal size: 1/4" (DN6) Flow range: 15 – 500 l/h ( 0,066 – 2,2 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): 2 pulse outputs / 1 reed / 1 hall (approx. 390 PPL) Remote display (code): …………………………………………………. Connection type: …………………………………………………. Seals: …………………………………………………. Options: ………………………………………………….
2.4 IOG® 1/2”
Nominal size: ½" (DN15) Flow range: 1 – 30 l/min (0.25 – 8 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.5 IOG® 3/4”
Nominal size: ¾" (DN20) Flow range: 2 – 60 l/min (0.5 – 16 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.6 IOG® 1”
Nominal size: 1" (DN25) Flow range: 2,3 – 68 l/min (0.6 – 18 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.7 IOG® 1” HF
Nominal size: 1" (DN25) Flow range: 5,7 – 170 l/min (1,5 – 45 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.8 IOG® 1 ½”
Nominal size: 1 1/2" (DN40) Flow range: 9,5 – 246 l/min (2.5 – 65 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.9 IOG® 2”
Nominal size: 2 " (DN50) Flow range: 15 – 379 l/min (4 – 100 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
2.10 IOG® 3”
Nominal size: 3 " (DN80) Flow range: 19 – 700 l/min (5 – 185 US GPM) Body material: …………………………………………………. Rotor material: …………………………………………………. Pulser/displays (code): …………………………………………………. Remote display (code): …………………………………………………. Connection type: 1/8” BSP Seals: …………………………………………………. Options: ………………………………………………….
Brand: IOG® meter Manufacturer: Badger Meter
Presse Infromation
Nürtinger Str. 76 72639 Neuffen Germany Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de [email protected]
We measure the resources of our world
Product range
Electromagnetic flow meters
Ultrasonic flow meters
Weirs and flumes
Turbine meters
Nutating disc meters
Impeller meters
Vortex meters
Variable area flow meters
Differential pressure flow meters
Venturi tubes
Mass meters
Heat meters
Hydraulic testers
Flow calibrators
Lubrication meters
Oil management systems
Control valves
