Upload
nelson-f-leon-carvajal
View
228
Download
0
Embed Size (px)
Citation preview
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 1/35
T
H
S
N
I
D
H
A M M
E R
A
D
B T
S 2 0 0 6
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 2/35
CONTENTS
PAGE No.
• 2” RANGE 1
DOMINATOR 100 2
MACH 20 2
• 3” RANGE 3
MACH 303 4
DART 350 4
DOMINATOR 350 4
• 4” RANGE 5NT4 6
MACH 44 6
SUPER DOMINATOR 400 7
GROUTMASTER 400 7
• 5” RANGE 8
NT5 9MACH 50 9
DOMINATOR 500 10
SUPER DOMINATOR 500 10
SUPER DOMINATOR 550 10
• 6” RANGE 11
NT6 12
SUPER DOMINATOR 600 13
SUPER DOMINATOR 650 13
MACH 60 14
DOMINATOR 600 15
• 7” RANGE 16
DOMINATOR 750 17
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 3/35
CONTENTS
PAGE No.
• 8” RANGE 18
DOMINATOR 800 19
DOMINATOR 880 20
DOMINATOR 850 21
• 10” RANGE 22
DOMINATOR 1000 23
• 12” RANGE 24
MACH 120 25MACH 122 25
MACH 132 26
MACH 142 26
SUPER DOMINATOR 1200 26
• RC RANGE 27
RC 412 28RC 512 29
RC 512E 29
• MADE TO ORDER BITS 30
• CONDITIONS OF SALE 31
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 4/35
DOMINATOR 100
MACH 20
The Dominator 100 is designed for small diameter drilling operations and its superior drillingerformance makes it at least 50% faster than its nearest competitor
Suitable for operation at air pressures of 7-17 Bar (100-250psi)
Drilling diameters from 55mm - 66mm
The valveless design of the Dominator 100 provides high performance at both low and high pressures
Strong robust design withstands heavy duty applications
A non return valve is fitted into the Dominator 100 improving its performance where ground water is
resent.
Suitable for operation at air pressures of 7-17 Bar (100-250psi)
The valved design of the Mach 20 provides high performance at low pressures
Strong robust design withstands heavy duty applications
Drilling diameters from 70mm to 80mm
All steel valve provides reliable operation and avoids the possibility of heat distortion
Three levels of air volume with a variety of chokes available
2” RANGE
1
AIR CONSUMPTION
PSI BAR CFM M3/MIN
100 7 60 1.6
150 10.5 93 2.6
200 14 126 3.5
250 17 159 4.5
DOMINATOR 100
AIR PRESSURE AIR CONSUMPTION
AIR CONSUMPTION
M3/MIN CFM M3/MIN CFM M3/MIN CFM M3/MIN CFM
SOLID PLUG 2 70 3.8 135 5.8 205 7.6 270
3MM PLUG 2.4 85 4.5 160 6.7 235 8.8 310
NO PLUG 2.8 100 5.1 180 8.3 295 9.8 345
MACH 20
7 BAR (100PSI) 10.5 BAR (150PSI) 14 BAR (200PSI) 17BAR (250 PSI)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 5/35
2” RANGE cont.
DOMINATOR 100
Dominator 100 SK RK
600251
ITEM DESCRIPTION PART NUMBER
1 Thread Protector 200005 - -2 Snap Ring 783041 2 2
3 NRV Seat 603448 - 1
4 O Ring 768147 2 2
5 NRV 603447 - 1
6 NRV Spring 760100 2 2
7 Top Adaptor 603413 - -
8 O Ring 768168 2 2
9 O Ring 768175 2 2
10 Cylinder 603410 - -
11 Piston 603450 - -
12 Snap Ring 783037 2 2
13 Bit Retaining Ring 603449 - 1
14 Chuck Spacer 603412 1 1
15 Chuck 603411 - 116 Protective Cap 741047 - -
Service Kit SK31
Repair Kit RK54
Foot Valve 603208
F/V tool - Body 603233
F/V tool - Pusher 603232
HAMMER TYPE
MODEL NUMBER Contents
Quantities
HAMMER TYPE DOMINATOR 100
PART NUMBER 600251
SHANK HALCO DOM 100TOP THREAD 40mm DIN 405 6 TPI BOX
WEIGHT 7 Kg
OUTSIDE DIAMETER 47mm (1.7/8" )
MAKE UP LENGTH 772mm (30.3/8")
RECOMMENDED
MAXIMUM THRUST120 Kg (264 lbs)
PART FACE WEIGHT
NUMBER MM INCH DESIGN TYPE QTY/DIA (Kg)
650017 55 2.1/6 FLAT DOMED 6 x 11mm / 2 x 9mm 1.16
650032 64 2.1/2 FLAT DOMED 6 x 11mm / 3 x 9mm 1.37
SEMI BAL / 6 x 11mm SB /
BALLISTIC 3 x 9mm B
DIAMETER BUTTONS
HALCO DOMINATOR 100 SHANK
653161 66 2.3/5 FLAT 1.43
SPECIFICATION
SPARE PARTS
DOMINATOR 100 STANDARD BIT RANGE
SK RK
600169 600209
ITEM DESCRIPTION
1 Thread protector 200002 200005 - -
2 Top adaptor 602715 602837 - -
3 Wear spacer (Optional) 602726 602726 2 2
4 NRV 602727 602727 - 1
5 NRV spring 760111 760111 2 2
6 NRV housing 602720 602720 - -
7 Valve Centraliser 602724 602724 1 1
8 Valve 602725 602725 1 1
Solid bleed plug (Standard) 732025 732025
3mm bleed plug (Optional) 602736 602736
10 Air Distributor 602719 602719 - 1
11 Liner 602717 602717 - -
12 Cylinder 602714 602714 - -
13 Piston 602718 602718 - -
14 Piston Guide bush 602723 602723 - -
15 Bottom spacer 602722 602722 - 1
16 Bit retaining rings 602721 602721 - 1
17 Chuck lock ring 602729 602729 2 2
18 Chuck 602716 602716 - 1
19 Protective cap 741013 741013 - -
SK Service Kit SK18 SK18
RK Repair Kit RK30 RK30
Contents
Quantities
1 1
HAMMER TYPE
MODEL NUMBER
PART NUMBER
9
Mach 20
SPARE PARTS
SPECIFICATION
MACH 20 STANDARD BIT RANGE
HAMMER TYPE MACH 20 MACH 20
PART NUMBER 600169 600209
SHANK HALCO MACH 20 HALCO MACH 20TOP THREAD 50mm DIN 405 6TPI BOX40mm DIN 405 6TPI BOX
WEIGHT 13 Kg 13 Kg
OUTSIDE DIAMETER 62mm (2.7/16") 62mm (2.7/16")
MAKE UP LENGTH 840mm (33") 840mm (33")
RECOMMENDED
MAXIMUM THRUST150 Kg (330 lbs ) 150 Kg (330 lbs )
PART FACE WEIGHT
NUMBER MM INCH DESIGN TYPE QTY/DIA (Kg)
HALCO SHANK
650952 70 2.3/4 FLAT DOMED 4 X 9mm / 6 X 11mm 2.4
650953 76 3 FLAT DOMED 5 X 9mm / 6 X 11mm 2.5
650954 76 3 FLAT SEMI-BALLISTIC 5 X 9mm / 6 X 11mm 2.5
DIAMETER BUTTONS
MACH 20
2
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 6/35
3” RANGE
3
MACH 303
DART 350
DOMINATOR 350
MACH 303 General purpose hammer for small hole drilling.Inapplications such as seismic and geological survey, micro-
piling, floor, wall and roof bolting or for blast holes where
environmental considerations limit hole size and blasting
procedure. Suitable for drilling at a wide range of air pressures
in both soft and hard rock conditions.
DOMINATOR 350 hammer is a high performance hammer for
medium to hard rock conditions. Operates at an optimum air
pressure between 14-24 bar (200-350 psi).
DART 350 hammer gives up to 25% increase in performance
compared to conventional 3" hammers. Particularly suitable for
low pressure operation although capable of working between
7-24 bar (100-350psi). Drilling diameters 90mm - 104mm
(3.1/2" - 4.3/32”).
BAR PSI M3/MIN CFM
7 100 2.8 99
10.5 150 4.4 156
12 170 5.0 177
14 200 5.9 207
17 250 7.3 257
24 350 10.0 353
BAR PSI M3/MIN CFM
7 100 2.5 87
10.5 150 4.7 167
12 170 5.6 199
14 200 7.0 247
17 250 9.3 327
24 350 13.8 487
BAR PSI M3/MIN CFM
7 100 2.3 82
10.5 150 4.4 155
12 170 5.2 184
14 200 6.5 228
17 250 8.5 301
24 350 12.6 446
MACH 303
AIR CONSUMPTION
AIR PRESSURE
AIR PRESSURE
AIR PRESSURE AIR CONSUMPTION
AIR CONSUMPTION
DART 350
DOMINATOR 350
AIR CONSUMPTION
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 7/35
3” RANGE cont.
SPECIFICATION
SPARE PARTS
4
MACH 303 / DART 350 / DOMINATOR 350
Mach 303 Dart 350 Dart 350 (no NRV) Dominator 350
Halco IR 3.5 IR 3.5 IR 3.5 SK RK
600080 600198 600303 600199
ITEM DESCRIPTION1 Thread Protector 200111 200111 200111 200111 - -
2 Top Adaptor 602403 602980 603706 602980 - -
3 O Ring 768098 768098 768098 768098 2 2
4 NRV 602328 602328 - 602328 - 1
5 NRV Spring 760100 760100 - 760100 2 2
6 NRV Housing 602327 602971 - 602971 - -
7 Disk Springs 760094 760094 - 760094 2 2
8 Thrust Washer 601920 602972 - 602972 - 1
9 O Ring 768033 768033 - 768033 2 2
10 Air Distributor 601975 602973 - 603108 - 1
11 Washer - 602979 - 602979 - -
12 Snap Ring 777039 783035 - 783035 2 2
13 Piston 602542 603019 603019 603107 - -
14 Cylinder 601890 602974 602974 602974 - -
15 Snap Ring 783016 783036 783036 783036 2 2
16 Bit Retaining Rings 601995 602976 602976 602976 - 1
17 Chuck Lock Ring 602304 - - - 2 2
18 Chuck Spacer 601760 602977 602977 602977 2 2
19 Chuck 601892 602978 602978 602978 - 1
20 End Cap 741012 741045 741045 741045 - -
Service Kit SK01 SK27 SK27 SK27
Repair Kit RK01 RK44 RK44 RK47
Foot Valve 601921 602922 602922 602922F/V tool - Body 601922 603061 603061 603061
F/V tool - Pusher 601659 601659 601659 601659
Contents
Quantities
MODEL NUMBER
HAMMER TYPE
PART NUMBER
MACH 303 / I.R 3.5 STANDARD BIT RANGE
HAMMER TYPE MACH 303 DART 350 DART 350 (NO NRV) DOMINATOR 350
PART NUMBER 600080 600198 600303 600199
SHANK HALCO MACH 303 IR 3.5 IR 3.5 IR 3.5
TOP THREAD 2.3/8 API REG PIN 2.3/8 API REG PIN 2.3/8 API REG PIN 2.3/8 API REG PIN
WEIGHT 20 Kg 23 Kg 22 Kg 23 Kg
OUTSIDE DIAMETER 77mm (3.1/32") 81mm (3.3/16") 81mm (3.3/16") 81mm (3.3/16" )
MAKE UP LENGTH 822mm (32.1/3") 832mm (32.3/4") 832mm (32.3/4") 832mm (32.3/4")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
150 Kg (330 lbs) 150 Kg (330 lbs) 150 Kg (330 lbs) 150 Kg (330 lbs)
300 Kg (660 lbs) 300 Kg (660 lbs) 300 Kg (660 lbs) 300 Kg (660 lbs)
PART FACE WEIGHT
NUMBER MM INCH DESIGN TYPE QTY/DIA (Kg)
HALCO SHANK - MACH 303
650567 85 3.11/32 CONVEX DOMED 11 X 11mm 3.6
650569 90 3.1/2 CONVEX DOMED 11 X 11mm 3.7
650860 90 3.1/2 CONVEX SEMI-BALLISTIC 13 X 11mm 3.7
650926 90 3.1/2 CONVEX BALLISTIC 13 X 11mm 3.7650731 100 3.15/16 FLAT DOMED 16 X 11mm 4.5
IR 3.5 SHANK - DOMINATOR / DART 350
650622 90 3.1/2 CONVEX SEMI-BALLISTIC 13 X 11mm 3.8
650623 90 3.1/2 CONVEX DOMED 13 X 11mm 3.8
653119 92 3.5/8 CONVEX BALLISTIC 13 X 11mm 4.3
650609 95 3.3/4 CONVEX SEMI-BALLISTIC 15 X 11mm 4.0
650620 95 3.3/4 CONVEX DOMED 15 X 11mm 4.0
650610 100 3.15/16 CONVEX BALLISTIC 15 X 11mm 4.5
650621 100 3.15/16 CONVEX DOMED 15 X 11mm 4.5
650624 104 4.3/32 CONVEX DOMED 8 X 13mm/ 8 X 11mm 4.9
DIAMETER BUTTONS
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 8/35
4” RANGE
5
AIR CONSUMPTION
BAR PSI M3/MIN CFM7 100 4.8 170
10.5 150 7.0 245
12 170 8.0 280
14 200 9.5 335
17 250 12.0 425
24 350 17.2 605
BAR PSI M3/MIN CFM7 100 5.2 185
10.5 150 7.5 265
12 170 8.5 300
14 200 9.9 350
17 250 12.2 430
24 350 17 600
BAR PSI M3/MIN CFM
7 100 5.2 185
10.5 150 7.5 265
12 170 8.5 300
14 200 9.9 350
17 250 12.2 430
24 350 17 600
MACH 44
AIR COMSUMPTION AIR PRESSURE
AIR PRESSURE
GROUTMASTER 400
AIR PRESSURE AIR COMSUMPTION
AIR COMSUMPTION
SUPER DOMINATOR 400
BAR PSI M3/MIN CFM
7 100 4.3 151
10.5 150 6.5 230
12 170 8.8 310
14 200 11.0 389
17 250 13.2 468
24 350 15.5 547
NT4
AIR PRESSURE AIR COMSUMPTION
NT4
MACH 44
SUPER DOMINATOR 400
The Super Dominator 400 is designed for maximumperformance at higher pressures, up to and including 350
PSI (24 Bar). The Super Dominator is a heavy duty
hammer with thicker 98mm diameter outer components to
provide an extended service life in abrasive conditions
and is also suitable for water well drilling.
The Mach 44 is a general purpose hammer used atpressures up to and including 350 PSI (24 Bar). It is suitable
for all rock conditions at a wide range of air pressures. The
Mach 44 has a proven track record of performance and
reliability.
The NT4 has been specifically designed for high
production drilling in blast hole applications. The hammer issimple, robust and has few parts, making it user friendly
and reliable. The NT4 utilizes Halco’s all new 12 spline
shank which has simplistic robust geometry combined with
increased drive contact area.
GROUTMASTER 400
The Groutmaster 400 is designed specifically for use with
grouting systems. The hammer is designed to take a drill bit fitted
with a high pressure non return valve to prevent grout entering
the hammer.
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 9/35
HAMMER TYPE NT4
PART NUMBER 600354
SHANK HALCO NT4TOP THREAD 2.3/8" API REG PIN
WEIGHT 38.5 Kg
OUTSIDE DIAMETER 100.5mm (4.956")
MAKE UP LENGTH 914mm (35.984")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
250 Kg (550 lbs)
500 Kg (1100 lbs)
4” RANGE cont.
SPECIFICATION
SPARE PARTS
NT4
NT4 STANDARD BIT RANGE
PART FACE OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY/DIA SIZE (KG)
653217 110 4.5/16 CONVEX BALLISTIC 14 X 14mm 7.96
653223 110 4.5/16 CONVEX DOMED 14 X 14mm 7.96
653209 115 4.1/2 CONVEX BALLISTIC 15 X 14mm 8.13
653218 115 4.1/2 CONCAVE BALLISTIC 7 X 13mm + 8 X 14mm 8.32
653224 115 4.1/2 CONVEX DOMED 15 X 14mm 8.14
653229 115 4.1/2 CONCAVE DOMED 7 X 13mm + 8 X 14mm 8.29653230 115 4.1/2 FLAT FACED DOMED 10X13mm + 8X14mm (PX39) 8.99
653228 121 4.3/4 CONCAVE DOMED 7 X 13mm + 8 X 14mm 8.53
653197 127 5 CONVEX BALLISTIC 18 X 14mm Y 9.05
653268 127 5 CONCAVE DOMED 8 X 13mm + 8 X 14mm Y 8.75
DIAMETER BUTTONS
HALCO NT4 SHANK
NT4 HAMMER
Halco NT4 SK RK
600354
ITEM DESCRIPTION PART NUMBER
1 Thread Protector 200111 - -2 Snap Ring 783049 2 2
3 NRV Seat 603919 - 1
4 O' Ring 768187 2 2
5 Non Return Valve 603918 - 1
6 NRV Spring 760142 2 2
7 Top Adaptor 603946 - -
8 O' Ring 768190 2 2
9 O' Ring 768190 2 2
10 Cylinder 603937 - -
11 Piston 604076 - -
12 Bit Guide Bush 603947 - 1
13 O' Ring 768189 2 2
14 Bit Retaining Ring 603948 - 1
15 Chuck Lock Ring 602733 2 216 Chuck 603939 - 1
17 End Cap 741019 - -
Foot Valve 603951
F/V tool - body 604020
F/V tool - pusher 601644
Service Kit SK59
Repair Kit RK93
MODEL Contents
Quantities
SPECIFICATION
MACH 44
MACH 44 STANDARD BIT RANGE
SPARE PARTSMach 44
Halco SK RK
600070
ITEM DESCRIPTION PART NUMBER
1 Thread Protector 200111 - -2 Top Adaptor 601632 - -
3 O Ring 768040 2 2
4 NRV 602330 - 1
5 NRV Spring 760084 2 2
6 NRV Seat 601778 - 1
7 NRV Finger 601717 - -
Shim - 0.5mm 601640 3 3
Shim - 1.0mm 601720 3 3
Shim - 1.5mm 601721 3 3
9 Compression Ring 601635 1 1
10 O Ring 768050 2 2
11 Air Distributor 601868 - -
12 Snap Ring 783014 2 2
13 Cylinder 601865 - -
14 Piston 602456 - -
15 Snap Ring 783014 2 216 Containment Band 792037 - -
17 Bit Retaining Ring 601945 - 1
18 Chuck Spacer 601431 1 1
19 Chuck 601439 - 1
20 End Cap 741019 - -
SK Service Kit SK02
RK Repair Kit RK02
Foot Valve 601641
F/V tool - body 601643
F/V tool - pushert 601644
HAMMER TYPE
MODEL NUMBER
8
Contents
Quantities
HAMMER TYPE MACH 44
PART NUMBER 600070
SHANK HALCO MACH 44
TOP THREAD 2.3/8 API REG PIN
WEIGHT 35.3 Kg
OUTSIDE DIAMETER 95mm (3.3/4")
MAKE UP LENGTH 1000mm (39.3/8")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
250 Kg (550 lbs)
500 Kg (1100 lbs)
6
PART FACE OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY/DIA SIZE (KG)
650930 105 4.1/8 CONVEX DOMED 15 X 13mm 9.1
650580 108 4.1/4 CONCAVE BALLISTIC 14 X 13mm 9.5
650788 108 4.1/4 CONVEX DOMED 13 X 13mm 9.5
650987 108 4.1/4 CONVEX SEMI-BALLISTIC 15 X 13mm 9.1
650931 110 4.5/16 CONVEX DOMED 15 X 13mm 9.6
650932 115 4.1/2 CONVEX DOMED 8 X 14mm / 8 X 13mm 9.7
650936 115 4.1/2 CONVEX BALLISTIC 16 X 13mm 9.7
650969 115 4.1/2 CONVEX SEMI-BALLISTIC 16 X 13mm 9.6
650933 120 4.3/4 CONVEX DOMED 8 X 14mm / 8 X 13mm 10.0
650466 127 5 CONVEX DOMED 16 X 13mm Y 11.0
650925 127 5 CONCAVE SEMI-BALLISTIC 16 X 13mm Y 10.7
650384 130 5.1/8 FLAT FACED DOMED 8 X 16mm / 8 X 13mm Y 11.7
650073 130 5.1/8 CONVEX BALLISTIC 16 X 13mm Y 10.9
650444 140 5.1/2 CONVEX DOMED 17 X 13mm Y 12.5
650445 150 5.7/8 CONVEX DOMED 17 X 13mm Y 13.5
DIAMETER BUTTONS
HALCO MACH 44
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 10/35
4” RANGE cont.
SPECIFICATION
SPARE PARTS
SUPER DOMINATOR 400 / GROUTMASTER 400
MACH 44 / DHD340A STANDARD BIT RANGE
GROUTMASTER 400
Halco-SP A34-15 / SD4 DHD340A GROUTMASTER SK RK
600224 600226 600258 600284
ITEM DESCRIPTION
1 Thread Protector 200111 200111 200111 200111 - -
2 Top Adaptor 603215 603215 603215 603792 - -
3 O Ring 768040 768040 768040 768040 2 2
4 NRV 602633 602633 602633 602633 - 1
5 NRV Spring 760108 760108 760108 760108 2 2
Shim - 4.9mm 602634 602634 602634 602634 - 1
Shim - 5.3mm 602635 602635 602635 602635 - 1
Shim - 5.7mm 602636 602636 602636 602636 - 1
7 Compression Spring 760107 760107 760107 760107 - 1
8 Air Distributor 603266 603266 603266 603266 - -
9 O Ring 768050 768050 768050 768050 2 2
10 Cylinder 603390 603390 603384 603384 - -
11 Piston 603396 603441 603383 603383 - -
12 Snap Ring 783029 783029 783029 783029 2 2
13 Containment Band 792037 792037 - 792037 2 2
14 Bit Retaining Ring 603793 603439 603586 603586 - 1
15 Chuck Lock Ring 602733 602733 602733 602733 2 2
16 Chuck Seal - - - 768166 1 1
17 Chuck 603273 603274 603218 603189 - 1
18 End Cap 741019 741046 741046 741046 - -
SK Service Kit SK30 SK30 SK45 SK35
RK Repair Kit RK52 RK42 RK83 RK56
Foot Valve 601641 601842 601773 603401
F/V tool - body 601643 601848 601643 601643
F/V tool - pushert 601644 601644 601644 601644
6
PART NUMBER
SUPER DOMINATOR 400
Contents
Quantities
HAMMER TYPE
MODEL NUMBER
HAMMER TYPE GROUTMASTER 400
PART NUMBER 600224 600226 600258 600284
HALCO SANDVIK MISSIONINGERSOLL RAND HALCOMACH44 A34-15 / SD4 DHD340A GROUTMASTER 400
TOP THREAD 2.3/8 API REG PIN 2.3/8 API REG PIN 2.3/8 API REG PIN 2.3/8 API REG PIN
WEIGHT 38 Kg 38 Kg 38 Kg 38 Kg
OUTSIDE DIAMETER 98mm (3.7/8") 98mm (3.7/8" ) 98mm (3.7/8" ) 98mm (3.7/8")
MAKE UP LENGTH 1042mm (41") 1042mm (41") 1042mm (41") 1042mm (41")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
250 Kg (550 lbs)
500 Kg (1100 lbs)
250 Kg (550 lbs)
500 Kg (1100 lbs)500 Kg (1100 lbs) 500 Kg (1100 lbs)
SUPER DOMINATOR 400
250 Kg (550 lbs) 250 Kg (550 lbs)
PART FACE BUTTONS OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY/DIA SIZE (KG)
INGERSOLL RAND DHD340A SHANK / ATLAS COPCO COP44
650950 108 4.1/4 CONVEX DOMED 15 X 13mm 8
650968 108 4.1/4 CONVEX SEMI-BALLISTIC 15 X 13mm 10
650949 110 4.5/16 CONVEX DOMED 15 X 13mm 8.1
650961 110 4.5/16 CONVEX SEMI-BALLISTIC 15 X 13mm 8.1
653091 110 4.5/16 CONVEX PARABOLIC 14X 14mm 8.5
650526 115 4.1/2 CONVEX DOMED 16 X 13mm 8.2
650625 115 4. 1/2 CONCA VE DOMED/SEMI BALLISTIC 8 X 14mm D/6 X 13mm S/ B 8. 2
650955 115 4.1/2 FLAT DOMED 8 X 14mm / 10 X 13mm 8.3
650967 115 4.1/2 CONVEX SEMI-BALLISTIC 16 X 13mm 8.5
650680 120 4.3/4 CONCAVE DOMED/SEMI BALLISTIC 8 X 13 mm / 8 X 13 mm 10
650612 121 4.3/4 CONVEX SEMI-BALLISTIC 14 X 13mm 9.5
650611 127 5 CONCAVE DOMED 16 X 13mm Y 9.5
650966 127 5 CONCAVE SEMI-BALLISTIC 16 X 13mm Y 9.6
650013 127 5 CONVEX DOMED 16 X 13 mm Y 10.6
650614 130 5.1/8 CONCAVE DOMED/SEMI BALLISTIC 8 X 14mm D/8 X 13mm S/B Y 10.1
650675 130 5.1/8 CONVEX SEMI-BALLISTIC 16 X 13mm Y 9.2
653094 140 5.1/2 CONCAVE DOMED 9 X 16mm / 9 X 14mm Y 11.8
DIAMETER
FOR GROUTMASTER AND A34-15 (SD4) BITS SEE MADE TO ORDER BITS PAGE 30 7
PART FACE OVER- Weight
UMBER MM INCH DESIGN TYPE QTY/DIA SIZE (KG)
650930 105 4.1/8 CONVEX DOMED 15 X 13mm 9.1
650580 108 4.1/4 CONCAVE BALLISTIC 14 X 13mm 9.5
650788 108 4.1/4 CONVEX DOMED 13 X 13mm 9.5
650987 108 4.1/4 CONVEX SEMI-BALLISTIC 15 X 13mm 9.1
650931 110 4.5/16 CONVEX DOMED 15 X 13mm 9.6
650932 115 4.1/2 CONVEX DOMED 8 X 14mm / 8 X 13mm 9.7
650936 115 4.1/2 CONVEX BALLISTIC 16 X 13mm 9.7
650969 115 4.1/2 CONVEX SEMI-BALLISTIC 16 X 13mm 9.6
650933 120 4.3/4 CONVEX DOMED 8 X 14mm / 8 X 13mm 10.0
650466 127 5 CONVEX DOMED 16 X 13mm Y 11.0
650925 127 5 CONVEX SEMI-BALLISTIC 16 X 13mm Y 10.7
650384 130 5.1/8 FLAT FACED DOMED 8 X 16mm / 8 X 13mm Y 11.7
650073 130 5.1/8 CONVEX BALLISTIC 16 X 13mm Y 10.9
650444 140 5.1/2 CONVEX DOMED 17 X 13mm Y 12.5
650445 150 5.7/8 CONVEX DOMED 17 X 13mm Y 13.5
DIAMETER BUTTONS
ALCO MACH 44
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 11/35
5” RANGE
8
BAR PSI M3/MIN CFM M3/MIN CFM
7 100 5.6 199 6.6 23210.5 150 9.4 333 11.2 395
12 170 13.2 467 15.8 558
14 200 17.0 601 20.4 721
17 250 20.8 735 25.0 884
24 350 24.6 869 29.6 1046
NT5E
AIR CONSUMPTION AIR PRESSURE AIR CONSUMPTION
NT5 / NT5HD
BAR PSI M3/MIN CFM
7 100 6.5 230
10.5 150 8.5 300
12 170 9.9 350
14 200 12 425
17 250 15.6 550
24 350 22.65 800
BAR PSI M3/MIN CFM
7 100 6.5 230
10.5 150 8.5 30012 170 9.9 350
14 200 12 425
17 250 15.6 550
24 350 22.65 800
BAR PSI M3/MIN CFM
7 100 6.5 230
10.5 150 8.5 300
12 170 9.9 350
14 200 12 425
17 250 15.6 550
24 350 22.65 800
DOMINATOR 500
AIR PRESSURE
AIR PRESSURE
AIR PRESSURE AIR CONSUMPTION
AIR CONSUMPTION
AIR CONSUMPTION
SUPER DOMINATOR 550 HD
SUPER DOMINATOR 500
BAR PSI M3/MIN CFM
7 100 5.7 220
10.5 150 7.2 25512 170 8.2 290
14 200 11.0 390
17 250 14.9 525
24 350 23.4 825
MACH 50
AIR PRESSURE AIR CONSUMPTION
AIR CONSUMPTION
NT5
MACH 50
DOMINATOR 500
SUPER DOMINATOR 500
SUPER DOMINATOR 550 HD
The Mach 50 is a general purpose hammer suitable for all
rock conditions at a wide range of air pressures - 100-350 psi(7-24 bar). The hammer is fitted with a reversible cylinder to
prolong the service life. This hammer is versatile and reliable,
requiring only a few simple tool for servicing and maintenance.
The NT5 has been designed to give maximum
performance in blast hole applications. The NT5 has been
tuned to efficiently utilise the air supply to give optimumpenetration rates. This hammer is suitable for drilling a
wide range of air pressures, excelling at higher pressures.
Also available in a heavy duty version for increased life in
abrasive conditions, and an extra version specifically for
deep hole drilling.
Dominator 500 high performance hammer for medium to
hard rock conditions at a wide range of air pressures - 100-
350 psi (7-24 bar). This hammer’s high performance is
achieved through the use of a wide bodied piston which
delivers a greater blow energy.
Super Dominator 500 a class leader in performance, is
suitable for drilling at a wide range of air pressures,
excelling at high working pressures. For waterwell andshallow gas and oil applications with a top supported
piston and a recommended minimum bit size of 135mm
The Super Dominator 550 HD combines the raw power
of the Super Dominator 500 with extended hammer life in
abrasive conditions due to its larger outside diameter.
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 12/35
SPECIFICATION
NT5 STANDARD BIT RANGE
SPARE PARTS
NT5
5” RANGE cont.
SPECIFICATION
SPARE PARTS
MACH 50
MACH 50 STANDARD BIT RANGE
NT5 NT5 E NT5 HD
Halco NT5 Halco NT5Halco NT5 SK RK
600346 600315 600351
ITEM DESCRIPTION
1 Thread protector 201701 200111 201701 - -
2 Snap Ring 783050 783049 783050 2 2
3 NRV Seat 603872 603822 603872 - 1
4 O' Ring 768112 768182 768112 2 2
5 Non Return Valve 603554 603784 603554 - 1
6 NRV Spring 760135 760079 760135 2 2
7 NRV Spring Shield 603652 - 603652 - 1
8 Top Adaptor 604036 603780 604070 - -
9 O' Ring 768091 768091 768091 2 2
10 O' Ring 768043 768043 768043 2 2
11 Cylinder 603776 604069 604069 - -
12 Piston 603915 603915 603915 - -
13 Snap Ring 783025 783025 783025 2 2
14 Bit Guide Bush 603781 603781 603781 - 1
15 O' Ring 768147 768147 768147 2 2
16 Containment Band 768173 768173 768173 - -
17 Bit Retaining Ring 603782 603782 603782 - 1
18 Chuck 603777 604068 604068 - 1
19 End Cap 741051 741051 741051 - -
Service Kit SK60 SK58 SK60
Repair Kit RK92 RK94 RK95
Foot valve 603252
F/V tool - body 603254
F/V tool - pusher 603253
MODEL NUMBER
PART NUMBER
HAMMER TYPE
Contents
Quantities
HAMMER TYPE NT 5 NT 5E NT 5HD
PART NUMBER 600346 600315 600351
INGERSOLL RANDINGERSOLL RANDINGERSOLL RAND
QL50 QL50 QL50TOP THREAD 3.1/2" API REG PIN 2.3/8" API REG PIN 3.1/2" API REG PIN
WEIGHT 54.5 Kg 56.0 Kg 58 Kg
OUTSIDE DIAMETER 118.5mm (4.65") 126mm (4.96") 126mm (4.96")
MAKE UP LENGTH 1038mm (40.86") 1014mm (39.92") 1038mm (40.86")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
400 Kg (900 lbs)
900 Kg (1980 lbs)
400 Kg (900 lbs)
900 Kg (1980 lbs)900 Kg (1980 lbs)
400 Kg (900 lbs)
MACH 50
Halco SK RK
600046
ITEMDESCRIPTION
1 Thread Protector 201701 - -
2 Top Adaptor 601698 - -
3 O Ring 768043 2 2
4 Non Return Valve 602285 - 1
5 NRV Spring 760084 2 2
6 NRV Finger 601702 - -
7 Shim 601706 3 3
8 Make Up Ring 601700 1 1
9 Air Distributor 601699 - -
10 O Ring 768101 2 2
11 Snap Ring 783013 2 2
12 Piston 601695 - -
13 Cylinder 601694 - -
14 Snap Ring 783013 2 2
15 Spacer 601705 - 1
16 Bit Retaining Ring 602117 - 1
17 Chuck Spacer 601603 1 1
18 Chuck 601602 - 1
19 End Cap 741020 - -
SK Service Kit SK03
RK Repair Kit RK04
Foot Valve 601843
F/V tool - body 601847
F/V tool - pusher 601708
MODEL Contents
Quantities
HAMMER TYPE MACH50
PART NUMBER 600046
SHANK HALCO MACH50
TOP THREAD 3.1/2" API REG PINWEIGHT 54 Kg
OUTSIDE DIAMETER 114mm (4.4/16")
MAKE UP LENGTH 1012mm (40")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
400 Kg (900 lbs)
900 Kg (1980 lbs)
PART FACE OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY / DIA SIZE (Kg)
653064 130 5.1/8 CONVEX DOMED 13 X 16mm 14.3
653031 135 5.5/16 FLAT DOMED 7 X 16mm + 8 X 16mm Long 15.3
653149 140 5.1/2 CONCAVE DOMED 15 X 16mm 16.0
653235 140 5.1/2 FLAT DOMED 7 X 16mm + 8 X 16mm Long 16.3
653032 150 5.7/8 FLAT DOMED 8 X 16mm + 8 X 16mm Long Y 16.6
653246 165 6.1/2 CONVEX DOMED 20 X 16mm Y 19.0
INGERSOLL RAND QL50 SHANK
DIAMETER BUTTONS PART FACE OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY / DIA SIZE (Kg)
650461 127 5 CONVEX DOMED 13 X 16mm 15.0
650717 127 5 CONCAVE BALLISTIC 8 X 16mm / 8 X 13mm 15.0
650758 135 5.5/16 CONVEX DOMED 14 X 16mm 15.5
650913 135 5.5/16 FLAT SEMI-BALLISTIC 9 X 16mm / 9 X 13mm 16.0
650578 140 5.1/2 CONVEX DOMED 14 X 16mm 15.5
650989 140 5.1/2 CONCAVE DOMED 9 X 16mm / 9 X 14mm 17.0
650990 146 5.3/4 CONCAVE DOMED 8 X 18mm / 7 X 16mm 17.8
650463 150 5.7/8 CONVEX DOMED 14 X 16mm Y 18.0
650464 165 6.1/2 CONVEX DOMED 16 X 16mm Y 18.5
DIAMETER BUTTONS
HALCO MACH 50
9
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 13/35
5” RANGE cont.
DOMINATOR 500 / SUPER DOMINATOR 500 / SUPER DOMINATOR 550
SPECIFICATION
SPARE PARTS
MACH 50 / DHD350R / A43-15 STANDARD BIT RANGE
10
OVER-
MM INCH TYPE QTY / DIA SIZE
650772 140 5.1/2 CONCAVE DOMED 15 X 16mm 16.0
650677 140 5.1/2 CONCAVE Domed/Semi-Ballistic 8 X 16mmD / 7 X 16mmSB 16.4
653205 140 5.1/2 FLAT DOMED 7 X 16mm D / 8 X 16mm LONG 16.2
653070 140 5.1/2 CONVEX SEMI-BALLISTIC 8X16mm SB/8X16mm LONG SB 15.9
653257 146 5.3/4 CONCAVE DOMED 15 X 16mm 16.3
650676 150 5.7/8 CONCAVE Domed/Semi-Ballistic 9X16mmD / 10X16mmSB Y 17.8
650711 152 6 CONVEX DOMED 20 X 16mm Y 17.8
653099 160 6.1/4 CONCAVE DOMED 10 X 16mm / 8 X 20mm Y 21.4
653092 165 6.1/2 CONCAVE DOMED 10 X 16mm / 8 X 20mm Y 21.4
SANDVIK MISSION SHANK (A43-15/SD5)
650771 140 5.1/2 CONCAVE DOMED 15 X 16mm 15.7
653095 152 6 CONCAVE DOMED 16 X 16mm 17.7
653096 165 6.1/2 CONCAVE DOMED 10 X 16mm / 8 X 20mm 19.3
INGERSOLL RAND SHANK - DHD350R / ATLAS COPCO COP 54
PART
NUMBER
DIAMETER FACE
DESIGN
BUTTON WEIGHT
(KG)PART FACE OVER- Weight
UMBER MM INCH DESIGN TYPE QTY / DIA SIZE (Kg)
650461 127 5 CONVEX DOMED 13 X 16mm 15.0
650717 127 5 CONCAVE BALLISTIC 8 X 16mm / 8 X 13mm 15.0
650758 135 5.5/16 CONVEX DOMED 14 X 16mm 15.5
650913 135 5.5/16 FLAT SEMI-BALLISTIC 9 X 16mm / 9 X 13mm 16.0
650578 140 5.1/2 CONVEX DOMED 14 X 16mm 15.5
650989 140 5.1/2 CONCAVE DOMED 9 X 16mm / 9 X 14mm 17.0
650990 146 5.3/4 CONCAVE DOMED 8 X 18mm / 7 X 16mm 17.8650463 150 5.7/8 CONVEX DOMED 14 X 16mm Y 18.0
650464 165 6.1/2 CONVEX DOMED 16 X 16mm Y 18.5
DIAMETER BUTTONS
ALCO MACH 50
SUPER DOM 500 SUPER DOM 550 HD
HALCO A43-15 (SD5) DHD350 DHD350 SK RK
600120 600135 600267 600293
ITEM DESCRIPTION1 Thread Protector 201701 201701 201701 201701 - -
2 Snap Ring 783028 783028 783028 783028 2 2
3 NRV Seat 602703 602703 603510 603510 - 1
4 O Ring 768144 768144 768144 768144 2 2
5 NRV 602330 602330 603554 603554 - 1
6 NRV Spring 760084 760084 760135 760135 - 2
7 NRV Shield - - 603652 603652 - -
8 Top Adaptor 602704 602704 603513 603661 - -
9 O Ring 768091 768091 768091 768091 2 2
10 O Ring 768043 768043 768043 768043 2 2
11 Cylinder 602457 602457 603368 603370 - -
12 Piston 602459 602459 603369 603369 - -
13 Snap Ring 783025 783025 783025 783025 2 2
14 Bit Retaining Ring 602430 602562 602706 602706 - 115 Chuck Lock Ring - - 603104 603104 1 1
16 Chuck Spacer 602433 602433 602433 602863 2 2
17 Chuck 602458 602561 602549 602866 - 1
18 End Cap 741020 741020 741020 741020 - -
SK Service Kit SK16 SK16 SK48 SK49
RK Repair Kit RK25 RK26 RK72 RK73
Foot Valve 601843 601843 601902 601902
F/V tool - body 601847 601847 601877 601877
F/V tool - pusher 601708 601708 601708 601708
Contents
Quantities
HAMMER TYPE
MODEL NUMBER
PART NUMBER
DOMINATOR 500
HAMMER TYPE SUPER DOM 500 SUPER DOM 550 HD
PART NUMBER 600120 600135 600267 600293
Halco Sandvik Mission Ingersoll Rand Ingersoll Rand
Mach 50 A43-15 DHD350 DHD350
TOP THREAD 3.1/2" API REG PIN 3.1/2" API REG PIN 3.1/2" API REG PIN 3.1/2" API REG PIN
WEIGHT 58 Kg 58 Kg 58 Kg 67 Kg
OUTSIDE DIAMETER 118mm (4.65") 118mm (4.65") 118mm (4.65") 124.5mm (4.85")
MAKE UP LENGTH 980mm (38.60") 980mm (38.60") 975mm (38.40") 975mm (38.40")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
400 Kg (900 lbs) 400 Kg (900 lbs)
900 Kg (1980 lbs) 900 Kg (1980 lbs) 900 Kg (1980 lbs) 900 Kg (1980 lbs)
SHANK
DOMINATOR 500
400 Kg (900 lbs) 400 Kg (900 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 14/35
6” RANGE
11
BAR PSI M3/MIN CFM M3/MIN CFM
7 100 6.8 239 8.8 31110.5 150 10.8 381 13.5 477
12 170 14.8 522 18.2 642
14 200 18.8 664 22.9 808
17 250 22.8 806 27.5 973
24 350 26.8 948 32.2 1139
NT6 / NT6HD NT6E
AIR PRESSURE AIR CONSUMPTION AIR CONSUMPTION
AIR CONSUMPTION
BAR PSI M3/MIN CFM
10.5 150 9.5 335
12 170 12 42514 200 14.1 500
17 250 19.5 690
24 350 30 1060
BAR PSI M3/MIN CFM
10.5 150 9.5 335
12 170 12 425
14 200 14.1 500
17 250 19.5 69024 350 30 1060
BAR PSI M3/MIN CFM
10.5 150 7.9 280
12 170 9.1 320
14 200 12.5 440
17 250 16.4 580
24 350 25.5 900
BAR PSI M3/MIN CFM
10.5 150 9.5 335
12 170 12 425
14 200 14.1 500
17 250 19.5 690
24 350 30 1060
AIR PRESSURE AIR CONSUMPTION
AIR PRESSURE
MACH 60
AIR CONSUMPTION AIR PRESSURE
DOMINATOR 600
AIR CONSUMPTION
SUPER DOMINATOR 600
SUPER DOMINATOR 650
AIR PRESSURE AIR CONSUMPTION
NT6
The NT6 has been specifically designed for high
production drilling in blast hole applications. Halco
have increased the hammer’s air pressure making
easy going of even the hardest of rock structures.
The NT6 hammers are available in a heavy duty
version for increased life in abrasive conditions, and
an extra version specifically for deep hole drilling.
SUPER DOMINATOR 600
MACH 60
DOMINATOR 600
The Super Dominator 600 is one of the fastest 6”
hammer specifically designed for high production drilling
in blast hole applications.The Super Dominator 600, is a
reduced weight hammer with water well drilling
capabilities.
The Super Dominator 650 Combines the raw power of
the Super Dominator 600 with extended hammer life in
abrasive conditions due to its heavy duty outside
diameter and reversible cylinder. With a recommendedminimum bit size of 6.3/4”.
The Mach 60 is a versatile and reliable hammer.
Economical to operate due to its relatively low air
consumption. A reversible cylinder further reduces
running cost by extending hammer life.
The Dominator 600 is a a class leader in performance
is suitable for drilling at a wide range of air pressures,
excelling at higher working pressures. With water well
drilling capabilities and a recommended minimum bit
size of 6”.
SUPER DOMINATOR 650
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 15/35
6” RANGE cont.
NT6
SPECIFICATION
SPARE PARTS
QL60 STANDARD BIT RANGE
12
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY / DIA SIZE (KG)
650094 156 6.1/8 CONCAVE DOMED 16 X 16mm 23.2
653139 165 6.1/2 CONCAVE DOMED 18 X 18mm 24.4
653231 165 6.1/2 CONCAVE DOMED/PARABOLICS 9X18mm (D) + 9X18mm (P) 24.4
653256 165 6.1/2 FLAT DOMED 14 X 16mm + 10 X 18mm 23.9653160 171 6.3/4 CONVEX DOMED 19 X 18mm 25.3
653128 178 7 CONCAVE DOMED 8X 20m m + 11 X 16mm Y 26.2
653227 190 7.1/2 CONCAVE DOMED 24 X 16mm Y 31.7
653142 203 8 CONCAVE DOMED 31 X 16mm Y 34.1
INGERSOLL RAND QL60 SHANK
DIAMETER BUTTONS
NT6 HAMMER NT6 E HAMMER NT6 HD HAMMER NT6 E HD HAMMER
I .R QL60 I .R QL60 I .R QL60 I .R QL60 SK RK
600333 600334 600336 600364
ITEM DESCRIPTION
1 Thread protector 201701 201701 201701 201701 - -
2 Snap Ring 783050 783050 783050 783050 2 2
3 NRV Seat 603872 603872 603872 603872 - 1
4 O' Ring 768112 768112 768112 768112 2 2
5 Non Return Valve 603554 603554 603554 603554 - 1
6 NRV Spring 760135 760135 760135 760135 2 2
7 NRV Spring Shield 603652 603652 603652 603652 - 1
8 Top Adaptor 603895 603894 603936 604123 - -
9 O' Ring 768140 768140 768140 768140 2 2
10 O' Ring 747105 747105 747105 747105 2 2
11 Cylinder 603650 603650 603934 603934 - -
12 Piston 604215 604215 604215 604215 - -
13 Snap Ring 783017 783017 783017 783017 2 2
14 Bit Guide Bush 604247 604247 604247 604247 - 1
15 Snap Ring 783017 783017 783017 783017 2 2
16 Bit Retaining Ring 604216 604216 604216 604216 - 117 Chuck Spacer 601942 601942 601928 601928 1 1
18 Chuck 604288 604288 604122 604122 - 1
19 End Cap 741034 741034 741034 741034 - -
SK Service Kit SK55 SK55 SK55 SK61
RK Repair Kit RK87 RK87 RK88 RK96
Foot valve 602852 602852 602852 602852
F/V tool - body 603547 603547 603547 603547
F/V tool - pusher 601569 601569 601569 601569
MODEL NUMBER
HAMMER TYPE
PART NUMBER
Contents
Quantities
HAMMER TYPE NT6 NT6 E NT6 HD NT6 E HD
PART NUMBER 600333 600334 600336 600364
INGERSOLL RAND INGERSOLL RAND INGERSOLL RAND INGERSOLL RAND
QL60 QL60 QL60 QL60TOP THREAD 3.1/2" API REG PIN 3.1/2" API REG PIN 3.1/2" API REG PIN 3.1/2" API REG PIN
WEIGHT 107 Kg 107 Kg 110 Kg 110 Kg
OUTSIDE DIAMETER 140mm (5.512") 140mm (5.512") 146mm (5.748") 146mm (5.748")
MAKE UP LENGTH 1063mm (41.850") 1063mm (41.850") 1063mm (41.850") 1063mm (41.850")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
500 Kg (1100 lbs)
1500 Kg (3300 lbs) 1500 Kg (3300 lbs)
500 Kg (1100 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 16/35
SPECIFICATION
DHD360 / A53-15 STANDARD BIT RANGE
SPARE PARTS
13
SUPER DOMINATOR 600 / SUPER DOMINATOR 650
6” RANGE cont.
1
234
5
6
7
8
9
10
11
12
13
14
15
16
17
1918
20
21
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (KG)
INGERSOLL RAND (DHD360) / ATLAS COPCO COP64
650783 152 6 CONVEX DOMED 20 X 16mm 25
650793 152 6 CONCAVE DOMED 17 X 16mm 25
650789 165 6.1/2 CONCAVE DOMED 18 X 16mm 25.5
650795 165 6.1/2 CONVEX DOMED 20 X 16mm 26
650605 165 6.1/2 FLAT DOMED 12 X 16mm / 8 X 16mm Long 25.8
650897 165 6.1/2 FLAT DOMED 8 X 20mm / 9 X 16mm 26.2
650016 165 6.1/2 FLAT DOMED/WEAR 12X16mm/8X16mm L/8X13mm W 26.7
653134 165 6.1/2 CONVEX DOMED 16 X 16mm / 12 X 16mm Long 25
650982 170 6.3/4 CONVEX DOMED 6 X 16mm / 13 X 18mm 26.5653038 170 6.3/4 CONCAVE DOMED 18 X 16mm 26.5
653097 180 7 CONCAVE DOMED 18 X 16mm Y 27.3
650686 180 7 CONCAVE DOMED/S-BALL 8 X 16mm D / 10 X 16mm S-B Y 27.3
653098 190 7.1/2 CONCAVE DOMED 24 X 16mm Y 30
653023 200 7.7/8 CONVEX DOMED 21 X 16mm Y 34.5
650673 203 8 CONCAVE DOMED 31 X 16mm Y 35.2
650335 203 8 CONVEX DOMED 20 X 16mm Y 35
650684 220 8.5/8 CONCAVE DOMED 22 X 20mm Y 40
650696 241 9.1/2 FLAT DOMED 18 X 16mm / 10 X 20mm Y 50
DIAMETER BUTTON PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (KG)
SANDVIK MISSION A53-15 / SD6
650550 151 6 CONCAVE DOMED 16 X 16mm 26
650790 165 6.1/2 CONCAVE DOMED 18 X 16mm 27.5
650940 165 6.1/2 CONVEX DOMED 19 X 16mm 27.5
650701 171 6.3/4 CONCAVE DOMED 24 X 16mm 26.2
650695 178 7 FLAT DOMED 20 X 16mm Y 29
650008 191 7.1/2 CONCAVE DOMED 24 X 16mm Y 30
650336 203 8 CONVEX DOMED 20 X 16mm Y 36
650065 216 8.1/2 CONCAVE DOMED 22 X 20mm Y 36
DIAMETER BUTTON
SUPER DOMINATOR 600
I.R DHD360 I.R DHD360 A53-15 / SD6 SK RK
600272 600213 600233
ITEM DESCRIPTION
1 Thread Protector 201701 201701 201701 - -
2 Snap Ring 783050 783050 783050 2 2
3 NRV Seat 603872 603872 603872 - 1
4 O Ring 768112 768112 768112 2 2
5 Non Return Valve 603554 603554 603554 - 1
6 NRV Spring 760135 760135 760135 2 2
7 NRV Spring Shield 603652 603652 603652 - 1
8 Top Adaptor 603506 603643 603643 - -
9 O Ring 768140 768140 768140 2 2
10 O Ring 768055 768055 768055 2 2
11 Cylinder 603584 603151 603151 - -
12 Piston 602891 602891 602600 - -
13 Snap Ring 783017 783017 783017 2 2
14 Bottom Spacer - - 601943 - -
15 O Ring 747105 747105 - 2 216 Bit Guide Bush 602239 602239 601992 - 1
17 Bit Retaining Ring 603749 603749 601994 - 1
18 O Ring 747105 747105 747105 2 2
19 Chuck Spacer 601942 601928 601928 - 1
20 Chuck 602495 602595 602017 - 1
21 End Cap 741009 741009 741009 - -
SK Service Kit SK37 SK28 SK44
RK Repair Kit RK65 RK48 RK71
Foot valve 601595 601595 601570
F/V tool - body 601878 601878 601568
F/V tool - pusher 601569 601569 601569
Contents
Quantities
HAMMER TYPE
MODEL NUMBER
SUPER DOMINATOR 650
PART NUMBER
HAMMER TYPE SUPER DOMINATOR 600
PART NUMBER 600272 600213 600233
INGERSOLL RAND INGERSOLL RAND SANDVIK MISSION
DHD360 DHD360 A53-15 / SD6
TOP THREAD 3 .1/2" API REG PIN 3 .1/2" API REG PIN 3 .1/2" API REG PIN
WEIGHT 100 Kg 104 Kg 104 Kg
OUTSIDE DIAMETER 140mm (5.511") 146mm (5.748") 146mm (5.748")
MAKE UP LENGTH 1139mm (44.842") 1139mm (44.842") 1139mm (44.842")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
SUPER DOMINATOR 650
SHANK
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 17/35
SPECIFICATION
MACH 60 STANDARD BIT RANGE
SPARE PARTS
14
MACH60
6” RANGE cont.
HAMMER TYPE MACH 60
PART NUMBER 600035
HALCO
MACH 60
TOP THREAD 3.1/2" API REG PIN
WEIGHT 89 Kg
OUTSIDE DIAMETER 138mm (5.433")
MAKE UP LENGTH 1095mm (43.110")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
SHANK
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (KG)
650585 152 6 CONVEX DOMED 16 X 16mm 23.5
650939 165 6.1/2 CONVEX DOMED 19 X 16mm 26
650927 170 6.3/4 FLAT DOMED 19 X 16mm 26
650474 178 7 CONVEX DOMED 18 X 16mm Y 30650354 191 7.1/2 CONVEX DOMED 21 X 16mm Y 32.5
650440 200 7.7/8 CONVEX DOMED 20 X 16mm Y 34
650681 203 8 CONCAVE DOMED 31 X 16mm Y 35
650441 225 8.7/8 CONVEX DOMED 26 X 16mm Y 42
650457 245 9.5/8 CONVEX DOMED 27 X 16mm Y 49
BUTTONDIAMETER
HALCO MACH 60 SHANK
MACH 60
HALCO SK RK
600035
ITEM DESCRIPTION PART NUMBERS1 Thread protector 201701 - -
2 Top adaptor 601555 - -
3 NR valve 601560 - 1
4 NRV spring 760079 2 2
5 NRV housing 601558 - -
6 Compression ring 601562 1 1
Shim - 0.50MM 601590 3 3
Shim - 1.00MM 601797 3 3
Shim - 1.50MM 601798 3 3
8 Air distributor 601557 - -
9 'O'ring 768130 2 2
10 Snap ring 783012 2 2
11 Cylinder 601553 - -
12 Piston 601554 - -
13 Snap ring 783012 2 2
14 Bottom spacer 601571 - 1
15 Bit Retaining ring 601573 - 1
16 'O'ring 747105 2 2
17 Chuck spacer 601563 1 1
18 Chuck 601556 - 1
19 Cap 741009 - -
SK Service Kit SK07
RK Repair Kit RK10
Foot valve 601570
F/V tool - body 601568
F/V tool - pusher 601569
7
HAMMER TYPE
MODEL NUMBER Contents
Quantities
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 18/35
DOMINATOR 600
SPECIFICATION
DHD360 / A53-15 / MACH 60 STANDARD BIT RANGE
SPARE PARTS
15
6” RANGE cont.
SPECIFICATION
SPARE PARTSDOMINATOR 600
I.R DHD360 SK RK
600094
ITEM DESCRIPTION
1 Thread protector 201701 - -2 Top adaptor 602240 - -
3 O'ring 768140 2 2
4 NR valve 601560 - 1
5 NRV spring 760079 2 2
6 NRV housing 601940 - -
Shim - 4MM 601946 - 1
Shim - 5MM 601947 - 1
Shim - 6MM 601948 - 1
Shim - 7MM 601949 - 1
8 Compression Spring 760096 - 1
9 Air distributor 601979 - -
10 O'ring 768055 2 2
11 Snap ring 783017 2 2
12 Cylinder 601937 - -
13 Piston 602891 - -
14 Snap ring 783017 2 215 O' Ring 747105 - 1
16 Bit guide bush 602239 - 1
17 Bit retaining ring 602504 - 1
18 O'ring 747105 2 2
19 Chuck spacer 601942 1 1
20 Chuck 602495 - 1
21 Cap 741009 - -
SK Service Kit SK21
RK Repair Kit RK35
Foot valve 601595
F/V tool - body 601878
F/V tool - pusher 601569
HAMMER TYPE
MODEL NUMBER
7
Contents
Quantities
HALCO A53-25 SK RK
600151 600152
ITEM DESCRIPTION
1 Thread protector 201701 201701 - -2 Top adaptor 601935 602240 - -
3 O'ring 768140 768140 2 2
4 NR valve 601560 601560 - 1
5 NRV spring 760079 760079 2 2
6 NRV housing 601940 601940 - -
Shim - 4MM 601946 601946 - 1
Shim - 5MM 601947 601947 - 1
Shim - 6MM 601948 601948 - 1
Shim - 7MM 601949 601949 - 1
8 Compression Spring 760096 760096 - 1
9 Air distributor 601979 601979 - -
10 O'ring 768055 768055 2 2
11 Snap ring 783017 783017 2 2
12 Cylinder 601937 601937 - -
13 Piston 602600 602600 - -
14 Snap ring 783017 783017 2 215 Bottom spacer 601943 601943 - 1
16 Bit guide bush - 601992 - 1
17 Bit retaining ring 601941 601994 - 1
18 O'ring 747105 747105 2 2
19 Chuck spacer 601942 601942 1 1
20 Chuck 601936 602004 - 1
21 Cap 741009 741009 - -
SK Service Kit SK05 SK06
RK Repair Kit RK07 RK08
Foot valve 601570 601570
F/V tool - body 601568 601568
F/V tool - pusher 601569 601569
Contents
Quantities
7
HAMMER TYPE
MODEL NUMBER
DOMINATOR 600
PART NUMBER
HAMMER TYPE
PART NUMBER 600151 600152
HALCO SANDVIK MISSION
MACH 60 A53-25TOP THREAD 3.1/2" API REG PIN 3.1/2" API REG PIN
WEIGHT 89 Kg 89 Kg
OUTSIDE DIAMETER 139mm (5.472") 139mm (5.472")
MAKE UP LENGTH 1208mm (47.559") 1208mm (47.559")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
DOMINATOR 600
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
HAMMER TYPE DOMINATOR 600
PART NUMBER 600094
INGERSOLL RAND
DHD360
TOP THREAD 3.1/2" API REG PIN
WEIGHT 89 Kg
OUTSIDE DIAMETER 139mm (5.472")
MAKE UP LENGTH 1208mm (47.559")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
500 Kg (1100 lbs)
1500 Kg (3300 lbs)
SHANK
PART FACE OVER- WEIGHT
UMBER MM INCH DESIGN TYPE QTY SIZE (KG)
GERSOLL RAND (DHD360) / ATLAS COPCO COP64
650783 152 6 CONVEX DOMED 20 X 16mm 25
650793 152 6 CONCAVE DOMED 17 X 16mm 25
650789 165 6.1/2 CONCAVE DOMED 18 X 16mm 25.5
650795 165 6.1/2 CONVEX DOMED 20 X 16mm 26
650605 165 6.1/2 FLAT DOMED 12 X 16mm / 8 X 16mm Long 25.8
650897 165 6.1/2 FLAT DOMED 8 X 20mm / 9 X 16mm 26.2
650016 165 6.1/2 FLAT DOMED/WEAR 12X16mm/8X16mm L/8X13mm W 26.7
653134 165 6.1/2 CONVEX DOMED 16 X 16mm / 12 X 16mm Long 25
650982 170 6.3/4 CONVEX DOMED 6 X 16mm / 13 X 18mm 26.5
653038 170 6.3/4 CONCAVE DOMED 18 X 16mm 26.5
653097 180 7 CONCAVE DOMED 18 X 16mm Y 27.3
650686 180 7 CONCAVE DOMED/S-BALL 8 X 16mm D / 10 X 16mm S-B Y 27.3653098 190 7.1/2 CONCAVE DOMED 24 X 16mm Y 30
653023 200 7.7/8 CONVEX DOMED 21 X 16mm Y 34.5
650673 203 8 CONCAVE DOMED 31 X 16mm Y 35.2
650335 203 8 CONVEX DOMED 20 X 16mm Y 35
650684 220 8.5/8 CONCAVE DOMED 22 X 20mm Y 40
650696 241 9.1/2 FLAT DOMED 18 X 16mm / 10 X 20mm Y 50
DIAMETER BUTTON PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (KG)
SANDVIK MISSION A53-15 / SD6
650550 151 6 CONCAVE DOMED 16 X 16mm 26
650790 165 6.1/2 CONCAVE DOMED 18 X 16mm 27.5
650940 165 6.1/2 CONVEX DOMED 19 X 16mm 27.5
650701 171 6.3/4 CONCAVE DOMED 24 X 16mm 26.2
650695 178 7 FLAT DOMED 20 X 16mm Y 29
650008 191 7.1/2 CONCAVE DOMED 24 X 16mm Y 30
650336 203 8 CONVEX DOMED 20 X 16mm Y 36
650065 216 8.1/2 CONCAVE DOMED 22 X 20mm Y 36
650585 152 6 CONVEX DOMED 16 X 16mm 23.5
650939 165 6.1/2 CONVEX DOMED 19 X 16mm 26
650927 170 6.3/4 FLAT DOMED 19 X 16mm 26650474 178 7 CONVEX DOMED 18 X 16mm Y 30
650354 191 7.1/2 CONVEX DOMED 21 X 16mm Y 32.5
650440 200 7.7/8 CONVEX DOMED 20 X 16mm Y 34
650681 203 8 CONCAVE DOMED 31 X 16mm Y 35
650441 225 8.7/8 CONVEX DOMED 26 X 16mm Y 42
650457 245 9.5/8 CONVEX DOMED 27 X 16mm Y 49
HALCO MACH 60 SHANK
DIAMETER BUTTON
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 19/35
7” RANGE
16
AIR CONSUMPTION
BAR PSI M3/MIN CFM
7 100 9.9 349
10.5 150 15.7 553
12 170 18 634
14 200 21.5 756
17 250 27.3 960
24 350 38.5 1368
DOMINATOR 750
AIR CONSUMPTION AIR PRESSURE
DOMINATOR 750
The Dominator 750 is suitable for a wide range of air
pressures, 100 - 350psi (7-24 Bar).
Drilling hole diameters of from 192mm to 254mm (7.5/8” to
10”), the Dominator 750 is up to 50% faster than competing
models. The mining quarrying and waterwell industries will all
benefit from high reliability offered by a one piece top
adaptor/ air distributor.
A reversible cylinder is also fitted to the Dominator 750 to
prolong hammer life and reduce costs.
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 20/35
DOMINATOR 750
SPECIFICATION
A63-15 STANDARD BIT RANGE
SPARE PARTS
17
7” RANGE cont.
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
SANDVIK MISSION A63-15/SD8 SHANK
650959 200 7.7/8 CONCAVE DOMED 12X16mm/9X20mm/6X13mm 43.0
650375 203 8 CONCAVE DOMED 10X20mm / 14X16mm 43.5
650922 203 8 CONCAVE DOMED/S-BALLISTIC 10x20mmD/14X16mmSB 43.0
650837 219 8.5/8 CONCAVE DOMED 18 X 20mm 46.0
650705 222 8.3/4 CONCAVE DOMED 24 X 20mm 46.5
650357 241 9.1/2 CONCAVE DOMED 18 X 20mm 52.5650606 254 10 CONCAVE DOMED 11X16mm / 18 X 20mm 56.5
650037 254 10 FLAT DOMED 28 X 20mm 58.3
653105 270 10.5/8 CONCAVE DOMED 34 X 18mm 57.0
650039 300 11.7/8 FLAT DOMED 29 X 20mm Y 73.0
DIAMETER BUTTONS
DOMINATOR 750
A63-15 / SD8 SK RK
MODEL NUMBER 600243
ITEM DESCRIPTION PART NUMBER
1 Thread Protector 207295 - -
2 Snap Ring 783034 2 2
3 O Ring 768150 2 2
4 NRV Seat 602887 - 1
5 Non Return Valve 602285 - 1
6 NRV Spring 760117 2 2
7 Top Adaptor 602882 - 1
8 O Ring 768151 2 2
9 O Ring 768152 2 2
10 Spacer 602885 1 1
11 Cylinder 602880 - 2
12 Piston 603382 - 213 Snap Ring 783033 2 2
14 O Ring 768149 2 2
15 Bit Retaining Ring 602886 - 1
16 Chuck Spacer 602885 1 1
17 Chuck 602881 - 1
18 Cap 741044 - -
SK Service Kit SK23
RK Repair Kit RK37
Foot Valve 601828
F/V tool - body 601829F/V tool - pusher 601569
HAMMER TYPE
Contents
Quantities
HAMMER TYPE DOMINATOR 750
PART NUMBER 600243
SANDVIK MISSION A63-15 / SD8
TOP THREAD 4 .1/2" API REG PIN
WEIGHT 165 Kg
OUTSIDE DIAMETER 172mm (6.772")
MAKE UP LENGTH 1232mm (48.504")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
800 Kg (1760 lbs)
2000 Kg (4400 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 21/35
8” RANGE
18
AIR CONSUMPTION
BAR PSI M3/MIN CFM
7 100 6.5 230
10.5 150 10.8 380
12 170 13.9 490
14 200 15.1 535
17 250 19.3 680
24 350 27.9 985
BAR PSI M3/MIN CFM
7 100 10.9 384
10.5 150 16.6 586
12 170 18.9 667
14 200 22.4 788
17 250 28.1 990
24 350 39.6 1394
BAR PSI M3/MIN CFM
7 100 14.6 513
10.5 150 23.5 829
12 170 27.1 955
14 200 32.5 1144
17 250 41.5 1460
24 350 59.4 2092
BAR PSI M3/MIN CFM
7 100 11 390
10.5 150 16.8 591
12 170 19 671
14 200 22.5 791
17 250 28.2 992
24 350 39.6 1393
DOMINATOR 880
DOMINATOR 800 AIR CONSUMPTION AIR PRESSURE
AIR CONSUMPTION
DOMINATOR 850
AIR PRESSURE AIR CONSUMPTION
DOMINATOR 880 DW
AIR PRESSURE AIR CONSUMPTION
AIR PRESSURE
DOMINATOR 800
DOMINATOR 880
DOMINATOR 850
DOMINATOR 880 DW
The Dominator 800 is a general purpose hammer
suitable for a wide range of air pressures, 100-350 psi
(7-24 Bar). The Dominator 800 is a well drilling hammer
with a mid-range air volume.
The Dominator 880 is a well drilling hammer with a midrange air volume. A choice of blank, 4mm, 6mm or 8mm
chokes can be fitted to provide varied air flow making the
Dominator 880 a versatile hammer. The wide body
diameter of the Dominator 880 allows for an increased
piston weight and therefore an improved performance.
The Dominator 880 Deepwell hammer has been
specifically designed for drilling deep holes in ground
water.
The Dominator 850 has been designed for high
performance drilling in hard to medium rock formations,
particularly mining applications. Its class leading
performance has been achieved with a larger / heavier
piston and a valveless air cycle providing a 50% increase
in stroke. As well as a reversible cylinder for prolonged
hammer life the Dominator 850 benefits from a QL80
shank design.
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 22/35
DOMINATOR 800
SPECIFICATION
MACH 80 / DHD380 / A63-15 STANDARD BIT RANGE
SPARE PARTS
19
8” RANGE cont.
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
650980 203 8 CONVEX DOMED 21 X 20mm 51.5
650938 216 8.1/2 CONVEX DOMED 21 X 20mm 53.0
650690 220 8.5/8 CONCAVE DOMED 22 X 20mm 55.2
650571 225 8.7/8 CONVEX DOMED 26 X 16mm 55.5
650746 254 10 CONVEX DOMED 21 X 20mm 65.0
650479 300 11.7/8 CONVEX DOMED 36 X 16mm Y 82.0
653040 300 11.7/8 FLAT DOMED 38 X 20mm Y 83.3
650365 311 12.1/4 CONVEX DOMED 29 X 20mm Y 83.0650908 375 14.3/4 FLAT DOMED 40 X 20mm Y 121.0
SANDVIK MISSION A63-15/SD8 SHANK
650959 200 7.7/8 CONCAVE DOMED 12X16mm/9X20mm/6X13mm 43.0
650375 203 8 CONCAVE DOMED 10X20mm / 14X16mm 43.5
650922 203 8 CONCAVE DOMED/S-BALLISTIC 10x20mmD/14X16mmSB 43.0
650837 219 8.5/8 CONCAVE DOMED 18 X 20mm 46.0
650705 222 8.3/4 CONCAVE DOMED 24 X 20mm 46.5
HALCO SHANK
DIAMETER BUTTONS PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
SANDVIK MISSION A63-15/SD8 SHANK cont.
650357 241 9.1/2 CONCAVE DOMED 18 X 20mm 52.5
650606 254 10 CONCAVE DOMED 11X16mm / 18 X 20mm 56.5
650037 254 10 FLAT DOMED 28 X 20mm 58.3
653105 270 10.5/8 CONCAVE DOMED 34 X 18mm 57.0
650039 300 11.7/8 FLAT DOMED 29 X 20mm Y 84.5
INGERSOLL RAND SHANK - DHD380
650977 200 7.7/8 CONCAVE DOMED 31 X 16mm £52
650373 203 8 CONCAVE DOMED 10 X 20mm / 14 X 16mm 51.5650022 241 9.1/2 CONCAVE DOMED 10 X 16 / 18 X 20mm 56.9
650389 254 10 CONCAVE DOMED 18 x 20mm / 10X16mm 64.5
650898 300 11.7/8 CONVEX DOMED 34 X 20mm Y 84.5
653041 311 12.1/4 CONCAVE DOMED 42 X 20mm Y 84.1
BUTTONSDIAMETER
A63-15 / SD8 DHD 380 Halco SK RK
600308 600309 600310
ITEM DESCRIPTION1 Thread Protector 207295 207295 207295 - 1
2 Snap Ring 783034 783034 783034 2 2
3 NRV Seat 602887 602887 602887 - 1
4 O Ring 768150 768150 768150 2 2
5 NRV 602285 602285 602285 - 1
6 NRV Cover 603696 603696 603696 - 1
7 NRV Spring 760108 760108 760108 2 1
8 Top Adaptor 603607 603607 603607 - -
9 Spacer 603576 603576 603576 1 1
10 O Ring 768103 768103 768103 2 2
11 O Ring 768145 768145 768145 2 2
12 Cylinder 603687 603687 603687 - -
13 Piston 603747 603755 603754 - -14 Snap Ring 783015 783015 783015 2 2
15 Spacer - 602840 - - 1
16 Containment Band 768102 603549 603549 2 2
17 Bit Ring 601839 603043 601677 - 1
18 Chuck Spacer 603576 603576 603576 1 1
19 Chuck 603686 603495 603685 - 1
20 End Cap 741034 741034 741034 - -
SK Service Kit SK51 SK25 SK25
RK Repair Kit RK79 RK64 RK78
Foot Valve 601828 601819 601675
F/V tool - Body 601829 601820 601820
F/V tool - Pusher 601569 601569 601569
Contents
Quantities
DOMINATOR 800
HAMMER TYPE
MODEL NUMBER
PART NUMBER
HAMMER TYPE
PART NUMBER 600308 600309 600310
SANDVIK MISSION INGERSOLL RAND HALCO
A63-15 / SD8 DHD380 MACH 80
TOP THREAD 4. 1/2" API REG PIN 4. 1/2" API REG PIN 4. 1/2" API REG PIN
WEIGHT 180 Kg 181 Kg 175 Kg
OUTSIDE DIAMETER 182mm (7.165") 182mm (7.165") 182mm (7.165")
MAKE UP LENGTH 1180mm (46.456") 1180mm (46.456") 1180mm (46.456")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
DOMINATOR 800
800Kg (1760 lbs ) 800Kg (1760 lbs ) 800Kg (1760 lbs )
2000KG (4400 lbs) 2000KG (4400 lbs) 2000KG (4400 lbs)
SHANK
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 23/35
SPECIFICATION
DHD380 / A63-15 STANDARD BIT RANGE
SPARE PARTS
20
8” RANGE cont.
DOMINATOR 880 / DOMINATOR 880 DEEPWELL
8” RANGE cont.
PART FACE OVER- WEIGHT
UMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
ANDVIK MISSION A63-15/SD8 SHANK
650959 200 7.7/8 CONCAVE DOMED 12X16mm/9X20mm/6X13mm 43.0
650375 203 8 CONCAVE DOMED 10X20mm / 14X16mm 43.5
650922 203 8 CONCAVE DOMED/S-BALLISTIC 10x20mmD/14X16mmSB 43.0
650837 219 8.5/8 CONCAVE DOMED 18 X 20mm 46.0
650705 222 8.3/4 CONCAVE DOMED 24 X 20mm 46.5
650357 241 9.1/2 CONCAVE DOMED 18 X 20mm 52.5
650606 254 10 CONCAVE DOMED 11X16mm / 18 X 20mm 56.5
650037 254 10 FLAT DOMED 28 X 20mm 58.3
653105 270 10.5/8 CONCAVE DOMED 34 X 18mm 57.0
650039 300 11.7/8 FLAT DOMED 29 X 20mm Y 84.5
DIAMETER BUTTONS PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
INGERSOLL RAND SHANK - DHD380
650977 200 7.7/8 CONCAVE DOMED 31 X 16mm £52
650373 203 8 CONCAVE DOMED 10 X 20mm / 14 X 16mm 51.5
650022 241 9.1/2 CONCAVE DOMED 10 X 16 / 18 X 20mm 56.9
650389 254 10 CONCAVE DOMED 18 x 20mm / 10X16mm 64.5
650898 300 11.7/8 CONVEX DOMED 34 X 20mm Y 84.5
653041 311 12.1/4 CONCAVE DOMED 42 X 20mm Y 84.1
DIAMETER BUTTONS
DOMINATOR
880 DW
A63-15 / SD8 DHD 380 DHD 380 SK RK
600311 600312 600261ITEM DESCRIPTION
1 Thread Protector 207295 207295 207295 - -
2 Snap Ring 783034 783034 783034 2 2
3 NRV Seat 602887 602887 602887 - 1
4 O Ring 768150 768150 768150 2 2
5 Non Return Valve 602285 602285 602285 - 1
6 NRV Cover 603696 603696 603696 - 1
7 NRV Spring 760108 760108 760108 2 2
8 Top Adaptor 603607 603607 603498 - 1
9 Spacer 603576 603576 603576 1 1
10 O Ring 768103 768103 768103 2 2
11 O Ring 768145 768145 768145 2 2
Blank Plug (blank) 602450 602450 - - -
Blank Plug (4mm) 602451 602451 - - -
Blank Plug (6mm) 602452 602452 - - -Blank Plug (8mm) 602453 602453 - - -
13 Cylinder 603691 603691 603496 - -
14 Piston 603614 602654 602743 - -
15 Snap Ring 783015 783015 783015 2 2
16 Spacer - 602840 602840 - 1
17 Containment Band 768102 603549 603549 - -
18 Bit Ring 601839 603043 603043 - 1
19 Chuck Spacer 603576 603576 603576 1 1
20 Chuck 603686 603495 603495 - 1
21 End Cap 741027 741027 741027 - -
SK Service Kit SK51 SK25 SK25
RK Repair Kit RK79 RK64 RK64
Foot Valve 601828 601819 601819
F/V tool - Body 601829 601820 601820
F/V tool - Pusher 601569 601569 601569
HAMMER TYPE
DOMINATOR 880
PART NUMBER ContentsQuantitiesMODEL NUMBER
12*
* Available as a Bleed Kit part number 602548
HAMMER TYPE DOMINATOR 880DW
PART NUMBER 600311 600312 600261
SANDVIK MISSION INGERSOLL RAND INGERSOLL RAND
A63-15 / SD8 DHD380 DHD380
TOP THREAD 4. 1/2" API REG PIN 4. 1/2" API REG PIN 4. 1/2" API REG PIN
WEIGHT 177 Kg 177 Kg 177 Kg
OUTSIDE DIAMETER 182mm (7.165") 182mm (7.165") 182mm (7.165")
MAKE UP LENGTH 1263mm (49.724") 1263mm (49.724") 1263mm (49.724")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST2000KG (4400 lbs) 2000KG (4400 lbs) 2000KG (4400 lbs)
800Kg (1760 lbs)
DOMINATOR 880
SHANK
800Kg (1760 lbs) 800Kg (1760 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 24/35
SPECIFICATION
QL80 STANDARD BIT RANGE
SPARE PARTS
21
DOMINATOR 850
8” RANGE cont.
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
INGERSOLL RAND SHANK - QL80
653062 222 8.3/4 CONCAVE DOMED 14 X 18mm / 10 X 18mm Long 56.8
653239 254 10 CONCAVE DOMED 34X18mm / 12X13mm Retracks 64
653254 270 10.5/8 CONCAVE DOMED 42X18mm / 12X13mm Retracks 69.5
653263 270 10.5/8 CONCAVE PARABOLIC 42X18mm / 12X13mm Retracks 69.5
DIAMETER BUTTONS
DOMINATOR DOMINATOR
850 850 DW
QL80 QL80 SK RK
MODEL NUMBER 600245 600314
ITEM DESCRIPTION PART NUMBER
1 Thread Protector 207295 207295 - -
2 Snap Ring 783034 783034 2 2
3 NRV Seat 602887 602887 - 1
4 O Ring 768150 768150 2 2
5 NRV 602285 602285 - 1
6 NRV Cover 603696 603696 - 1
7 NRV Spring 760108 760108 2 2
8 Top Adaptor 603353 603353 - -
9 Spacer 603358 603358 1 1
10 O Ring 768169 768169 2 2
11 Cylinder 603347 603765 - -12 Piston 603349 603349 - -
13 Snap Ring 783039 783039 2 2
14 O Ring 768169 768169 2 2
15 Bit Guide Bush 603360 603767 - 1
16 Bit Ring 603359 603359 - 1
17 Chuck Spacer 603358 603358 1 1
18 Chuck 603357 603357 - 1
19 End Cap 741027 741027 - -
SK Service Kit SK32 SK32
RK Repair Kit RK55 RK55
Foot Valve 603334 603334
Body 603342 603342
Pusher 603341 603341
HAMMER TYPE
Contents
Quantities
HAMMER TYPE DOMINATOR 850 DOMINATOR 850 DW
PART NUMBER 600245 600314
INGERSOLL RAND INGERSOLL RANDQL80 QL80
TOP THREAD 4. 1/2" API REG PIN 4. 1/2" API REG PIN
WEIGHT 210 Kg 210 Kg
OUTSIDE DIAMETER 192mm (7.559") 192mm (7.559")
MAKE UP LENGTH 1281mm (50.433") 1281mm (50.433")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
800Kg (1760 lbs)
2000KG (4400 lbs)
800Kg (1760 lbs)
2000KG (4400 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 25/35
10” RANGE
22
DOMINATOR 1000
The Dominator 1000 incorporates a unique piston design
or high performance and reliability especially in water well applications. This hammer is suitable for a wide
ange of air pressures. Its optimum performance is
eached at air pressures of 200psi (14 bar) and above.
The Dominator 1000 has a body diameter of 230mm and
iston weight of 87.6kg, one of the heaviest in its class
roviding excellent performance. A reversible cylinder is
tted to the hammer to prolong its life and reduce cost.
Captive” bit retaining rings and an improved 2 start
hread design ensures that the Dominator 1000 is simpleo service with a few tools.
AIR CONSUMPTION
PSI BAR CFM M3/MIN
100 7 550 15.6
150 10.5 850 24
200 14 1130 32
250 17 1425 40.3
300 21 1710 48.5
350 24 2000 56.6
DOMINATOR 1000
AIR PRESSURE AIR CONSUMPTION
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 26/35
SPECIFICATION
SD10 STANDARD BIT RANGE
SPARE PARTS
23
DOMINATOR 1000
10” RANGE cont.
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
SANDVIK MISSION SD10 SHANK
650648 254 10 CONCAVE DOMED 11 X 16mm / 18 X 20mm 84.7
650644 280 11 CONCAVE DOMED 34 X 18mm 97.0
650650 305 12 CONCAVE DOMED 34 X 20mm Y 96.4650071 311 12.1/4 CONCAVE DOMED 46 X 20mm Y 107.0
650072 381 15 CONCAVE DOMED 65 X 20mm Y 146.0
DIAMETER BUTTONS
DOMINATOR 1000
SD10 SK RK
600248
ITEM DESCRIPTION PART NUMBER1 Lifting cap 602354 - -
2 Circlip 777001 2 2
3 'O'ring 768133 2 2
4 NRV seat 602286 - 1
5 NR valve 602288 - 1
6 NRV spring 760055 2 2
7 Adaptor assy 603429 - -
8 Top adaptor spacer 603432 1 1
9 O Ring 768172 2 2
10 O Ring 768172 2 2
Bleed Plug Blank 602499 - -
Bleed Plug 3mm 602500 - -
Bleed Plug 4mm 602501 - -
Bleed Plug 5mm 602502 - -
Bleed Plug 6mm 602503 - -
Bleed Plug 8mm 602874 - -
12 Cylinder 603434 - -
13 Piston 603433 - -
14 Snap ring 783040 2 2
15 Bit retaining ring 603435 - 1
16 Chuck spacer 603432 1 1
17 Chuck 603436 - 1
18 Cap 741049 - -
SK Service Kit SK29
RK Repair Kit RK50
Foot valve 603186F/V tool - body 603188
F/V tool - pusher 603187
11*
HAMMER TYPE
MODEL NUMBER Contents
Quantities
* Available as a Bleed Kit part number 600579
HAMMER TYPE DOMINATOR 1000
PART NUMBER 600248
SANDVIK MISSIONSD10
TOP THREAD 6 .5/8" API REG PIN
WEIGHT 367 Kg
OUTSIDE DIAMETER 230mm (9.055")
MAKE UP LENGTH 1390mm (54.724")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
1500 Kg (3400 lbs)
3500 Kg (7700 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 27/35
12” RANGE
24
AIR CONSUMPTION
MACH 120
MACH 122
MACH 132
MACH 142
The Mach 120 accepts A100-15 (SD12) shank bits
and has a working pressure range of 170 – 350 psi
(12 – 24 bar) whilst its optimum performance is
reached at air pressures of 200 psi (14 bar) and
above.
The Mach 122 accepts A100-15 (SD12) shank bits and
drills most efficiently at air pressures between 100 psi
(7 bar) and 170 psi (14 bar), due to its higher air consumption, provides increased uphole velocity,
particularly when using oversized diameter drill bits.
The Mach 132 hammer accepts IR DHD112 shank bits.
This hammer, although capable of high pressure drilling
s particularly suitable at pressures between 7-14 bar
(100-200 psi). This hammer has a pin drive arrangement
to prevent spline to spline contact thereby minimising
spline wear and damage which can result in bit shank
failure.
The Mach 142 hammer accepts IR DHD112S shank
bits and is equipped with an oversize chuck to drill
arger diameters at air pressures between 7-24 bar
(100-350 psi). This oversize chuck protects the
cylinder and prolongs its life. This hammer has a pindrive arrangement to prevent spline to spline contact
thereby minimising spline wear and damage which
can result in bit shank failure.
SUPER DOMINATOR 1200
The Super Dominator 1200 is accepts QL120 shank
bits and drills most efficiently at air pressures between
100 psi (7 bar) and 170 psi (14 bar), due to its higher air consumption, provides increased uphole velocity,
particularly when using oversized diameter drill bits.
BAR PSI M3/MIN CFM7 100 - -
10.5 150 - -
12 170 24.35 860
14 200 28.3 1000
17 250 35.4 1250
21 300 41.9 1480
24 350 48.1 1700
BAR PSI M3/MIN CFM
7 100 19.8 70010.5 150 29.45 1040
12 170 33.4 1180
14 200 39.05 1380
17 250 48.1 1700
21 300 59.5 2100
24 350 70.8 2500
BAR PSI M3/MIN CFM
7 100 19.8 700
10.5 150 29.5 104012 170 33.4 1180
14 200 39.05 1380
17 250 48.1 1700
21 300 59.5 2100
24 350 70.8 2500
BAR PSI M3/MIN CFM
7 100 19.8 700
10.5 150 29.5 1040
12 170 33.4 118014 200 39.05 1380
17 250 48.1 1700
21 300 59.5 2100
24 350 70.8 2500
BAR PSI M3/MIN CFM
7 100 19.8 700
10.5 150 29.45 1040
12 170 33.4 1180
14 200 39.05 138017 250 48.1 1700
21 300 59.5 2100
24 350 70.8 2500
SUPER DOM 1200
AIR PRESSURE AIR CONSUMPTION
AIR PRESSURE AIR CONSUMPTION
MACH 142
MACH 120
MACH 122
MACH 132
AIR PRESSURE AIR CONSUMPTION
AIR PRESSURE AIR CONSUMPTION
AIR PRESSURE AIR CONSUMPTION
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 28/35
SPECIFICATION
A100-15 / SD12 STANDARD BIT RANGE
SPARE PARTS
25
MACH 120 / MACH 122
12” RANGE cont.
PART FACE OVER- WEIGHT
NUMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
650874 300 11.7/8 CONVEX DOMED 29 X 20mm 138
650383 311 12.1/4 CONCAVE DOMED 31 X 20mm 133.5
650626 314 12.3/8 CONCAVE DOMED 34 X 20mm 140650988 381 15 CONCAVE DOMED 65 X 20mm D / 18 X 16mm W 208
653138 406 16 CONCAVE DOMED 74 X 20mm D / 18 X 16mm W 210
650706 438 17.1/4 CONCAVE DOMED 82 X 20mm D / 30 X 16mm W Y 267
650376 445 17.1/2 CONCAVE DOMED 79 X 20mm Y 245
HALCO/ SANDVIK MISSION A100-15 / SD12 SHANK
DIAMETER BUTTONS
MACH120 MACH122
A100-15 / SD12 A100-15 / SD12 SK RK
600108 600110
ITEM DESCRIPTION
1 LIFTING CAP 602354 602354 - -
2 CIRCLIP 777001 777001 2 2
3 O RING 768133 768133 2 2
4 NRV SEAT 602286 602286 - 1
5 NR VALVE 602288 602288 - 1
6 NRV SPRING 760055 760055 2 2
7 TOP ADAPTOR 602639 602639 - -
8 O RING 768137 768137 2 2
9 O RING 768137 768137 2 2
10 TOP ADAPTOR SPACER 602366 602366 1 1
11 CYLINDER 602013 602425 - -
12 PISTON 602047 602047 - -
13 SNAP RING 783021 783021 2 2
14 CONTAINMENT BAND 768105 768105 - -
15 BIT RETAINING RING 602102 602102 - 1
16 CHUCK SPACER 602366 602366 1 1
17 CHUCK 602052 602052 - 1
18 END CAP 741035 741035 - -
SK SERVICE KIT SK12 SK12
RK REPAIR KIT RK19 RK19
FOOT VALVE 601811 601811
F/V TOOL - BODY 601812 601812
F/V TOOL - PUSHER 601813 601813
PART NUMBER
HAMMER TYPE
MODEL NUMBER Contents
Quantities
HAMMER TYPE MACH 120 MACH 122
PART NUMBER 600108 600110
SANDVIK MISSION SANDVIK MISSION A100-15 / SD12 A100-15 / SD12
TOP THREAD 6 .5/8" API REG PIN 6 .5/8" API REG PIN
WEIGHT 614 Kg 614 Kg
OUTSIDE DIAMETER 273mm (10.748") 273mm (10.748")
MAKE UP LENGTH 1667mm (65.629") 1667mm (65.629")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
1600 Kg (3520 lbs)
3500 Kg (7700 lbs)
1600 Kg (3520 lbs)
3500 Kg (7700 lbs)
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 29/3526
12” RANGE cont.
MACH 132 / 142
SPECIFICATION
SPARE PARTS
DHD112 STANDARD BIT RANGE
SPARE PARTS
SPECIFICATION
QL120 STANDARD BIT RANGE
SUPER DOMINATOR 1200
PART FACE OVER- WEIGHT
UMBER MM INCH DESIGN TYPE QTY SIZE (Kg)
50946 381 15 CONCAVE DOMED 62 X 20mm / 30 X 16mm Wear 217
50942 444 17.1/2 CONCAVE DOMED 82 X 20mm / 30 X 16mm Wear Y 271
50943 476 18.3/4 CONCAVE DOMED 82 X 20mm / 30 X 16mm Wear Y 291
50646 489 19.1/4 CONCAVE DOMED 82 X 20mm / 30 X 16mm Wear Y 300
ACH 132 / DHD 112 SHANK
DIAMETER BUTTONS
MACH132 MACH142
DHD112 DHD112S SK RK
600142 600143
ITEM DESCRIPTION1 Lifting cap 602354 602354 - -
2 Circlip 777001 777001 2 2
3 NRV Seat 602286 602286 - 1
4 O Ring 768133 768133 2 2
5 Non Return Valve 602288 602288 - 1
6 NRV Spring 760055 760055 2 2
7 Top Adaptor 602639 602639 - -
8 O Ring 768137 768137 2 2
9 O Ring 768137 768137 2 2
10 Top Adaptor Spacer 602366 602366 1 1
11 Cylinder 602563 602563 - -
12 Piston 602532 602532 - -
13 Snap Ring 783021 783021 2 2
14 Bearing Bush 602531 602531 - 1
15 O Ring 768184 768184 2 2
16 Containment Band 603819 603819 4 417 Bit Retaining Ring 602530 602530 - 1
18 Chuck Spacer 602366 602366 1 1
19 Drive Pins 602533 602534 3 6
20 Chuck 602528 602529 - 1
21 End Cap 741035 741035 - -
SK Service Kit SK14 SK15
RK Repair Kit RK23 RK24
Foot valve 602522 602522
F/V tool - body 602523 602523
F/V tool - pusher 601813 601813
HAMMER TYPE
MODEL NUMBER
PART NUMBER
Contents
Quantities
HAMMER TYPE MACH 132 MACH 142
PART NUMBER 600142 600143
INGERSOLL RAND INGERSOLL RAND
DHD112 DHD112S
TOP THREAD 6 .5/8" API REG PIN 6 .5/8" API REG PIN
WEIGHT 614 Kg 688 Kg
OUTSIDE DIAMETER 273mm (10.748") 273mm (10.748")
MAKE UP LENGTH 1684mm (66.299") 1819mm (71.614")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
1600 Kg (3520 lbs)
3500 Kg (7700 lbs)
1600 Kg (3520 lbs)
3500 Kg (7700 lbs)
S-DOM1200
QL120 SK RK
600321ITEM DESCRIPTION PART NUMBER
1 Lifting Cap 602354 - -
2 Circlip 777001 2 2
3 O Ring 768133 2 2
4 NRV Seat 602286 - 1
5 Non Return Valve 602288 - 1
6 NRV Spring 760055 2 2
7 Top Adaptor 603813 - -
8 O Ring 768137 2 2
9 O Ring 768137 2 2
10 Top Adaptor Spacer 603575 1 1
11 Cylinder 603565 - -
12 Piston 603572 - -
13 Inner Bearing Ring 603566 1 1
14 Containment Band 603581 - -
15 Bit Retaining Ring 603567 - -16 Chuck Spacer 603568 1 1
17 Drive Pins 600595 3 6
18 Chuck Bearing 603563 1 1
19 Chuck 603562 - 1
20 End Cap 741050 - -
SK Service Kit SK47
RK Repair Kit RK76
Foot Valve 603561
F/V - Body 603582
F/V - Pusher 603583
HAMMER TYPE
MODEL NUMBER ContentsQuantities
FOR QL120 SHANK BITS SEEMADE TO ORDER BITS PAGE 30
HAMMER TYPE SUPER DOMINATOR 1200
PART NUMBER 600321
INGERSOLL RANDQL120
TOP THREAD 6 .5/8" API REG PIN
WEIGHT 614 Kg
OUTSIDE DIAMETER 284mm (11.181")
MAKE UP LENGTH 1796mm (70.709")
RECOMMENDED
MINIMUM THRUST
RECOMMENDED
MAXIMUM THRUST
SHANK
1600 Kg (3520 lbs)
3500 Kg (7700 lbs)
FOR DHD112S SHANK BITS SEEMADE TO ORDER BITS PAGE 30
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 30/35
RC RANGE
27
RC412 & RC512
The new Halco RC412, 512 & 512E hammer’s improved
performance ensures that any drilling project undertaken
gets done in a fraction of the time, resulting in cost savingsfor the contractor. The halco range of RC hammers have
been designed to give maximum performance in
Exploration & Grade Control hole applications. These
hammers have a one piece “integral top adaptor” which is
robust and simple requiring no make-up components, this
gives reliability and ease of service. At higher pressures the
RC hammers make easy going of even the hardest of rock
structures.
The RC512E hammer has been specifically designed for use with high pressure and large volume compressors.
BAR PSI M3/MIN CFM
150 325 10 9.2
200 405 14 11.5
250 490 17 13.9
300 580 21 16.4
350 665 24 18.8
400 745 28 21.0
450 830 32 23.5
500 920 35 26.0
BAR PSI M3/MIN CFM
150 360 10 10.2
200 450 14 13.0
250 545 17 15.5
300 645 21 18.3
350 740 24 21.0400 830 28 23.5
450 925 32 26.2
500 1020 35 29.0
AIR PRESSURE AIR CONSUMPTION
RC512 AIR PRESSURE AIR CONSUMPTION
RC512E
AIR CONSUMPTION
BAR PSI M3/MIN CFM
150 300 10.5 8.5
200 400 14.0 11.5
250 500 17.0 14.2
300 600 21.0 17.0
350 700 24.0 19.8
400 800 27.0 22.7
450 900 31.0 25.5
500 1010 34.5 28.6
RC412
AIR PRESSURE AIR CONSUMPTION
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 31/3528
4” RC RANGE
RC 412
SPECIFICATION
SPARE PARTS
RC412 BIT CATCHERS RC412 STANDARD BIT RANGE
REMET 4" METZKE 4" SK RK
600339 600341
ITEM DESCRIPTION
Sub Adaptor Assy 600611 6006131 O Ring 747120 - - -
2 Tube Connector 603848 603853 - -
3 O Ring 768099 768099 2 2
4 Sub Adaptor Body 603966 603968 - -
5 Spider 603821 603821 - -
6 Snap Ring 777019 777019 1 1
7 Sample Tube Spring 760139 760139 - -
8 Upper Sample Tube 603824 603824 - 1
Base Hammer 600608 600608
9 Circlip 777044 777044 1 1
10 NRV Seat & Filter 603823 603823 - -
11 O Ring 768135 768135 1 1
12 Quad-Ring Seal 768148 768148 1 1
13 Non Return Valve 603828 603828 - 1
14 NRV Spring 760140 760140 1 1
15 Top Adaptor Assy 603972 603972 - -
16 O Ring 768127 768127 4 10
17 O Ring 768133 768133 1 1
18 Sample Tube 603917 603917 - -
19 Cylinder 603971 603971 - -
20 Piston 603831 603831 - -
21 Snap Ring 783031 783031 1 1
22 Guide Bush 603921 603921 - 1
23 O Ring 768183 768183 3 5
24 Bit Retaining Ring 603920 603920 - 1
25 O Ring 792037 792037 - -
26 Bit Catcher see below see below - -27 Key 603142 603142 - -
28 Chuck 603953 603953 - 1
SK Service Kit SK52 SK52
RK Repair Kit RK86 RK86
HAMMER TYPE
RC412
Contents
Quantities
MODEL NUMBER
PART NUMBERS
Outside Diameter Part Number
118.00 / 118.25 603955
119.50 / 119.75 603956
121.00 / 121.25 603957
122.50 / 122.75 603958
124.00 / 124.25 603959
125.50 / 125.75 603960
127.00 / 127.25 603961
128.50 / 128.75 603962
130.00 / 130.25 603963
131.50 / 131.75 603923
133.00 / 133.25 604013
HAMMER TYPE
PART NUMBER 600339 600341
HALCO HALCORC412 RC412
TOP THREAD REMET 4" METZKE 4"
WEIGHT 69 Kg 69 Kg
OUTSIDE DIAMETER 116mm (4.567") 116mm (4.567")
MAKE UP LENGTH 1393mm (54.842") 1393mm (54.842")
SHANK
RC412
Part Face Weight
Number mm Inch Design Type Qty/Dia (Kg)
653178 121 4.3/4 CONCAVE DOMED 16 x 13mm 13.7
653179 127 5 CONCAVE DOMED 8x16mm/9x13mm 14.3
653177 130 5.1/8 CONCAVE DOMED 8x16mm/5x13mm/4x14mm 14.5
653164 133 5.1/4 CONCAVE DOMED 8x16mm/5x13mm/4x14mm 14.7
653194 136 5.3/8 CONCAVE DOMED 8x16mm/5x13mm/4x14mm 15.0
Diameter Buttons
Halco RC412
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 32/3529
5” RC RANGE
RC 512
SPECIFICATION
SPARE PARTS
RC512 BIT CATCHERS RC512 STANDARD BIT RANGE
RC512E
REMET 4 1/2" METZKE 4 1/2" REMET 4 1/2" SK RK
MODEL NUMBER 600347 600348 600358
ITEM DESCRIPTION
Sub Adaptor Assy 600621 600622 6006211 O Ring 747121 - 747121 - -
2 Tube Connector 604058 604060 604058 - -
3 O Ring 747047 747047 747047 2 2
4 Sub Adaptor Body 604059 604061 604059 - -
5 Spider 604056 604056 604056 - -
6 Snap Ring 783029 783029 783029 1 1
7 Sample Tube Spring 760144 760144 760144 - -
8 Upper Sample Tube 604057 604057 604057 - 1
Base hammer 600620 600620 600630
9 Circlip 777001 777001 777001 1 1
10 NRV Seat & Filter 604023 604023 604023 - -
11 O Ring 768040 768040 768040 1 1
12 Quad-Ring Seal 768156 768156 768156 1 1
13 Non Return Valve 604027 604027 604027 - 114 NRV Spring 760143 760143 760143 1 1
15 Top Adaptor Assembly 604047 604047 604024 - -
16 O Ring 768120 768120 768120 4 10
17 O Ring 768045 768045 768045 1 1
18 Sample Tube 604029 604029 604029 - -
19 Cylinder 604026 604026 604026 - -
20 Piston 604018 604018 604018 - -
21 Snap Ring 783009 783009 783009 1 1
22 Guide Bush 604021 604021 604021 - 1
23 O Ring 768191 768191 768191 3 5
24 Bit Retaining Ring 604019 604019 604019 - 1
25 O Ring 768091 768091 768091 - -
26 Bit Catcher see below see below see below - -
27 Key 603142 603142 603142 - -
28 Chuck 604011 604011 604011 - 1
SK Service Kit SK56 SK56 SK56
RK Repair Kit RK89 RK89 RK89
PART NUMBER
RC512
HAMMER TYPE
Contents
Quantities
HAMMER TYPE RC512E
PART NUMBER 600347 600348 600358
HALCO HALCO HALCORC512 RC512 RC512
TOP THREAD REMET 4 1/2" METZKE 4 1/2" REMET 4 1/2"
WEIGHT 87 Kg 87 Kg 87 Kg
OUTSIDE DIAMETER 130mm (5.118") 130mm (5.118") 130mm (5.118")
MAKE UP LENGTH 1412mm (55.590") 1412mm (55.590") 1412mm (55.590")
SHANK
RC512
Outside Diameter Part Number
133.00 / 133.25 604030
136.00 / 136.25 604016
142.00 / 142.25 604031152.00 / 152.25 604032
155.50 / 155.25 604033
185.00 / 185.25 604102
Part Face Weight
Number mm Inch Design Type Qty/Dia (Kg)
653199 137 5.3/8 CONCAVE DOMED 8x16mm/5x13mm/4x14mm 18.5
653200 140 5.1/2 CONCAVE DOMED 8x16mm/5x13mm/4x14mm 18.7
653201 146 5.3/4 CONCAVE DOMED 8x16mm/5x13mm/4x14mm 18.9
653202 156 6.1/8 CONCAVE DOMED 12x16mm/5x13mm 20.0
653203 159 6.1/4 CONCAVE DOMED 12x16mm/5x13mm 21.0
653214 190 7.1/2 CONCAVE DOMED 16x16mm/10x13mm 24.0
Diameter Buttons
Halco RC512
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 33/35
PART FACE OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY/DIA SIZE (KG)
650084 57mm 2 1/4" Flat DOMED / BALL 6x11mm D / 3x9mm B 1.2
653001 64mm 2 1/2" Flat S-BALL / BALL 6x11mm SB / 3x9mm B 1.37
653088 80mm 3 1/6" Flat DOMED 6 x 11mm / 6 x 9mm 2.5
653247 95mm 3 3/4" Convex BALLISTIC 13 x 11mm 3.9
650055 90mm 3 1/2" Convex DOMED / S-BALL 6 x 11mm / 7 x 11mm S-B 3.9
653237 95mm 3 3/4" Flat DOMED 6 X 11mm / 8 x 14mm 4.5
653241 115mm 4 1/2" Flat DOMED 8 x 14mm / 8 x 13mm 9.5
653248 108mm 4 1/4" Concave DOMED / BALL 8 x 11mm D / 8 x11mm B 9.1
653249 115mm 4 1/2" Concave DOMED / BALL 8 x 11mm D / 8 x11mm B 9.6
653136 115mm 4 1/2" Convex PARABOLC 17 x 14mm 9.5
650798 108mm 4 1/4" Flat DOMED 15 x 13mm 9.1
650740 115mm 4 1/2" Concave DOMED 14 x 13mm 9.2
650885 120mm 4 3/4 Flat DOMED 16 x 13mm 10
653107 110mm 4 5/16" Convex SEMI-BALLISIC 18 x 11mm 7.9
653033 115mm 4 1/2" Concave DOMED 12 x 13mm 9
653240 115mm 4 1/2" Flat DOMED 8 x 13mm / 8 x 14mm 9.1653270 115mm 4 1/2" Flat DOMED / S-BALL 8 x 14mm D / 8 x 13mm S-B 9.1
650679 120mm 4 3/4" Concave SEMI-BALLISTIC 16 x 13mm 9.3
650659 130mm 5 1/8" Concave SEMI-BALLISTIC 16 x 13mm Y 9.6
650965 130mm 5 1/8" Flat DOMED 10 x 13mm / 8x 14mm Y 10
650058 115mm 4 1/2" Concave DOMED 16 x 13mm 9.7
653232 127mm 5" Concave DOMED 16 x 13mm Y 10
653233 127mm 5" Concave DOMED / S-BALL 9 x 13mm D / 9 x 13mm S-B Y 10
653238 130mm 5 1/8" Convex BALLISTIC 18 x 14mm 13.5
653234 140mm 5 1/2" Concave SEMI-BALLISTIC 15 x 16mm 15.9
650599 127mm 5" Concave DOMED 8 x 16mm / 8 x 13mm 16.6
650838 127mm 5" Convex BALLISTIC 18 x 11mm 15
650654 130mm 5 1/8" Convex DOMED 13 x 16mm 15.4
650707 130mm 5 1/8" Convex SEMI-BALLISTIC 15 x 13mm 14.9
653269 135mm 5 1/3" Concave DOMED / BALL 9 x 16mm D / 9 x 13mm B 17650048 135mm 5 1/3" Flat DOMED / S-BALL 9 x 16mm D / 9 x 13mm S-B 16
653061 127mm 5" Concave DOMED 8 x 13mm / 8 x 16mm 16
650627 140mm 5 1/2" Concave DOMED 8 x 18mm / 7 x 16mm 16.6
653071 140mm 5 1/2" Convex DOMED 8 x 16mm / 8 x 16mm Long 15.9
653108 146mm 5 3/4" Concave DOMED 9x16mm/3x13mm/9x14mm 17.2
650778 140mm 5 1/2" Flat DOMED 15 x 16mm 16.6
650956 146mm 5 3/4" Concave DOMED 9x16mm/3x13mm/9x14mm 16.5
653063 152mm 6" Convex BALLISTIC 20 x 16mm Y 17
653118 172mm 6 3/4" Concave DOMED 18 x 16mm 25.1
653212 220mm 8 5/8" Concave DOMED 22 x 20mm Y 38.6
653211 241mm 9 1/2" Concave DOMED 18 x 20mm / 10 x 16mm Y 39.5
650640 154mm 6 1/16" Convex DOMED 16 x 16mm 23.2
653141 171mm 6 3/4" Convex PARABOLIC 12 x 18mm / 10x16mm Y 27.8650066 172mm 6 3/4" Concave DOMED 18 x 16mm Y 28.3
650694 178mm 7" Flat DOMED 20 x 16mm Y 27.3
653170 251mm 9 7/8" Concave DOMED 40 x 16mm Y 46.2
3" RANGE
4" RANGE
5" RANGE
INGERSOLL RAND DHD340 SHANK
HALCO GROUT MASTER 400 SHANK
DIAMETER BUTTONS
SANDVIK MISSION A34-15/SD4 SHANK
HALCO DOMINATOR 100 SHANK
HALCO MACH 20 SHANK
INGERSOLL RAND DHD 3.5 SHANK
HALCO NT4 SHANK
HALCO MACH 44 SHANK
HALCO MACH 303 SHANK
2" RANGE
INGERSOLL RAND QL60 SHANK
INGERSOLL RAND DHD360 SHANK
INGERSOLL RAND QL50 SHANK
HALCO MACH 50 SHANK
INGERSOLL RAND DHD350R SHANK
SANDVIK MISSION A43-15 / SD5 SHANK
6" RANGE
MADE TO ORDER BITS.
30
PART FACE OVER- Weight
NUMBER MM INCH DESIGN TYPE QTY/DIA SIZE (KG)
650583 152mm 6" Convex DOMED 16 x16mm 26.1
650524 159mm 6 1/4" Flat DOMED 20 x 16mm 27
653115 165mm 6 1/2" Flat DOMED 12 x 16mm / 8 x 16mm Long 28.1
650007 178mm 7" Concave DOMED 20 x 16mm Y 28.8
653101 203mm 8" Concave DOMED 31 x 16mm Y 37.9
653102 219mm 8 5/8" Concave DOMED 22 x 20mm Y 41.7
650697 241mm 9 1/2" Flat DOMED 10 x 20mm / 18 x 16mm Y 51.8
650634 165mm 6 1/2" Convex DOMED 10 x 16mm / 9 x 16mm Long 25.7
650996 165mm 6 1/2" Convex SEMI-BALLISTIC 19 x 16mm 25.7
650363 216mm 8 1/2" Flat DOMED 24 x 16mm Y 39
650458 300mm 11 4/5" Flat DOMED 36 x 16mm Y 72
653267 241mm 9.5" Concave DOMED 18 x 20mm / 10 x 16mm 51.5
650038 254mm 10" Flat DOMED 28 x 20mm 66.1
650514 330mm 13" Flat DOMED 38 x 16mm Y 93.8
650591 192mm 7 5/9" Concave DOMED 20 x 16mm 41
DOMED / S-BALL 15 x 18mm D / 6 x 16mm SB
/ RETACKS / 6 x 13mm Retracks
650870 216mm 8 1/2" Concave DOMED 18 x 20mm 44.5
650704 216mm 8 1/2" Concave DOMED 10 x 20mm / 14 x 16mm 45
DOME D / 10 x 20mm / 14 x 16mm /
RETRACKS 10 x 13mm Retracks
650912 222mm 8 3/4" Concave DOMED 19 x 20mm 50.4653103 241mm 9 1/2" Concave DOMED 18 x 20mm / 10 x16mm 51.5
650382 311mm 12 1/4" Concave DOMED 35 x 20mm Y 76.7
653014 203mm 8" Concave DOMED 11 X 18mm / 9 x 18mm Px39 51.5
650074 216mm 8 1 /2" Concave DOMED/RETRACKS 20 x 20mm / 9 x 13mm R 54.2
650962 225mm 8 7/8" Concave DOMED 19 x 20mm 58.6
653044 300mm 11 7/8" Concave DOMED 42 X 20mm Y 81.2
650710 311mm 12 1/4" Convex DOMED 39 x 20mm Y 84.1
653245 216mm 8 1/2" Concave DOMED 16 x 18mm / 10 x 18mm Long 56.8
653213 229mm 9" Concave DOMED/RETRACKS 30 x 20mm / 12 x 13mm R 58.4
653221 270mm 10 5/8" Concave DOMED/RETRACKS 42 x 20mm / 12 x 13mm R 64
650010 337mm 13 1/4" Concave DOMED 32 x 20mm 144
653236 375mm 14 3/4" Concave DOMED 65 x 20mm 205
650360 508mm 12" Flat DOMED 83 x 20mm 325
650699 550mm 21 2/3" Concave DOMED 112 x 20mm Y 346
650348 610mm 24" Flat DOMED 107 x 20mm Y 415
650018 438mm 17 1/4" Concave DOME D / W EA R 82 x 20mm / 18 x 16mm W Y 354
650964 508mm 20" Concave DOMED / WEAR 91 x 20mm / 36 x 16mm W Y 407
650907 610mm 24" Concave DOMED / WEAR 122 x 20mm / 66 x 16mm W Y 512
653126 660mm 26" Convex DOMED / WEAR 171 x 20mm / 39 x16mm W Y 600
653034 311 12.1/4 Concave DOMED 31 x 20mm 168
653089 314 12.3/8 Concave DOMED 32 x 20mm 168
653035 445 17.1/2 Concave DOMED / WEAR 82 x 20mm / 30 x 16mm W Y 271
INGERSOLL RAND QL80 SHANK
SANDVIK MISSION SD12 SHANK
INGERSOLL RAND DHD112S SHANK
QL120 SHANK
8" RANGE
12" RANGE
42.5
650693 216mm 8 1/2" Flat 47.6
650979
INGERSOLL RAND DHD380 SHANK
DIAMETER BUTTONS
6" RANGE cont.
200mm 7 7/8" Convex
SANDVIK MISSION A53-15 / SD6 SHANK
HALCO MACH 60/66 SHANK
HALCO MACH 80 SHANK
SANDVIK MISSION A63-25 / SD8 SHANK
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 34/35
CONDITIONS OF SALE
31
GENERAL All quotations, offers, acceptances and contracts of sale made by us or on our behalf are subject to the following terms and conditions which shall apply so far as the samee not varied by any special terms or conditions agreed in writing between the parties. Subject as aforesaid these terms and conditions shall apply to the exclusion of all other terms andnditions and in particular it is expressly agreed by the Buyer that the contractual conditions (if any) of the Buyer are excluded in their entirety. Quotations are valid for a period of 28 daysd for the goods in the quantities specified therein. Quotations are not offers and any order given in respect of a quotation is not binding on us until accepted on our order acceptancems. All prior correspondence or oral communications shall be regarded as superseded and not forming part of the contract. Prices quoted are subject to revision for errors andissions at any time. No statement, description, information, condition or recommendation, contained in any catalogue advertisement or communication or made verbally by any of our ployees or agents shall or shall be construed to enlarge vary or override in any way of these conditions.
SPECIFICATIONS All specifications, drawings, and particulars of weights and dimensions submitted with our tender are approximate only, and the descriptions and illustrationsntained in our catalogues, price lists and other advertisement matter are intended merely to present a general idea of the goods described therein, and none of these shall form part of contract. We reserve the right to change any specification for the Products without notice in writing to the Buyer.
BUYER'S DRAWING We accept no responsibility for the accuracy of patterns, drawing particulars or specifications supplied by the Buyer. To the extent that specifications supplied by
Buyer are inadequate goods will be supplied to our standard specifications.PRICES will be those ruling at the date of dispatch unless otherwise agreed. Where the goods or materials have to be imported in order to fulfill the contract, any increased costsnsequent on any change in exchange rates or duties will be invoiced to the Buyer. All prices are exclusive of VAT and any other tax. Any increase in costs or expenses arising from anyor omission or any special requirements of the Buyer or any modifications made at the Buyer's request may, at our option, be charged to the Buyer.
TERMS OF PAYMENT The Buyer shall pay the price of the goods net at our registered office 30 days from the date of our invoice. If the Buyer fails to make any payment on the duete we shall be entitled to charge interest on all amounts unpaid at the rate of two per cent per month on the outstanding balance. Notwithstanding the foregoing provisions we shallhout prejudice to our other rights have the right by notice in writing to the Buyer to demand immediate payment of all monies due from the Buyer to us for any goods delivered at anye.OVERDUE PAYMENTS We reserve the right to refuse to execute any order if the arrangements for payment or the Buyer's credit are not satisfactory to us, and to suspend or continue delivery of any goods or materials to any Buyer whose account is overdue for payment. Where any payment from a Buyer is overdue, all amounts owing to us from that Buyer,ether under this contract of sale or otherwise shall become immediately due and payable notwithstanding any other provision to the contrary wherever contained. When goods are
ady for delivery but the buyer cannot or will not accept delivery, the payment period will be deemed to have started when the goods are so ready. We reserve the right to require securitypayment by the Buyer before delivering any goods
DELIVERY shall take place ex-works on our premises in Southowram. The date(s) for delivery is (are) given in good faith but we accept no liability in the event of it (their) beingceeded. We accept no responsibility or liability for delay in delivery or non-delivery in whole or part caused by lockouts, strikes, fires, tempest, accidents to machinery or war or by anytute or statutory rule, order or regulation, or requisition of any government department or body or other authority or by any other cause whatsoever beyond our control or of anyexpected or exceptional nature. If any contract becomes impossible of performance or otherwise frustrated by the Buyer he shall be liable to pay to us a minimum of 15% of the contractce representing all costs, expenses, overheads, and a measure of profit which we, our suppliers, or sub contractors, have incurred or for which we or they are or may become liable innnection with the contract at the time of frustration or impossibility of perform provided that we shall not require payment for any standard parts or material which we may be able to usehe time in any other contract then current. Any pre-payments, which may have been made to us under the contract, shall be applied towards satisfaction of such sum as may becomee to us under the foregoing provisions, and the excess (if any) prepayment will be refunded by us. The Buyer shall be deemed to have accepted all goods upon their delivery by us. If Buyer fails to take delivery of the goods or to give us adequate delivery instructions at the time stated for delivery then, without prejudice to any other right or remedy available to us,may store the goods at the Buyer's risk and shall be entitled to make appropriate charges. Goods can be delivered in part quantities. In cases where a number of items are ordered
d which are either made specially to order or are not normally held in stock, then we reserve the right to supply up to 10% over or below the number stated on the order.LOSS OR DAMAGE IN TRANSIT We do not accept responsibility for damage, shortage or non delivery of any goods not insured by us nor where they are insured by us unless: (a)mage or shortage is notified in writing to both us and the carriers within three days of receipt of goods; (b) Non-delivery is notified both to us and the carriers, in writing, within ten dayshe date of dispatch (or, in the case of export sales, within 10 days of their scheduled arrival of at port of destination).
PACKING Carriage and packing charges are extra unless stated in our quotation. Packing materials will be charged. We are not liable to protect goods in a defined way, but will takeatever measures we consider necessary to protect goods and will charge accordingly.PASSING OF PROPERTY The risk in the goods shall pass to the Buyer on delivery but the property in the goods shall remain our sole and absolute property until such time as theyer shall have paid to us cash or cleared funds the agreed price together with the full price of any other goods the subject of any other contract with us for which payment is due. Theyer acknowledges that until such a time as the Buyer becomes the owner of the goods the Buyer is in possession of the goods solely as our fiduciary agent and bailee and the Buyer store, protect and insure them from the point of delivery and on his premises separately from the Buyer's own goods or those of any other person and in a manner which makes them
adily identifiable as our goods. The Buyer may, as our agent, sell or deal in the ordinary course of business with any such goods and with any object in which any such goods may beorporated and with our interest in any such goods or objects and may, for the purpose of any such sale or dealing, part with possession thereof. Until such time as the Buyer becomesner of the goods we shall be entitled to require the Buyer to deliver up the goods to us and, if the Buyer fails to do so forthwith, to enter upon the premises of the Buyer or any thirdrty where the goods are stored and repossess the goods. Notwithstanding that property in the goods has not passed to the Buyer we shall be entitled to maintain an action for the price
der Section 49 of the Sale of Goods Act 1979. EXCLUSIONS OF LIABILITY Every effort is made to ensure sound material and good workmanship but all terms, statements, conditions, warranties and representations whether ating to the nature, quality or condition of the goods or to their merchantable quality or fitness for purpose for which they may be required or otherwise howsoever used, whether pressed or implied, statutory or otherwise and whether contained in or collateral to the contract of sale are hereby excluded. Our liability under these Conditions shall be limited to thece of the goods, which are the subject of the contract. We shall be under no liability under these Conditions if the Buyer has not paid in full for the goods or the Buyer has executed or empted to execute repairs or alterations to the goods which are not authorized by us or has failed in any other respect to adhere strictly to the terms hereof or we have not been notifiedany defect in the goods (whether apparent on reasonable inspection or not) within one month of the defect becoming apparent. Our liability does not extend to any other loss or damageany nature whether or not on account of the negligence of us, our employees or agents, including (without limitation) loss of profit, cost of replacement elsewhere, loss or productionmage to plant, personal injury whether caused or not through failure to wear the correct protective clothing or any consequential or special loss or damage valid and effective. WARRANTY Any warranty, which must be confirmed in writing by Halco in order to be valid, is limited to faulty materials or workmanship and not as a consequence of fair wear andr which is excluded in its entirety and only then to that proportion of the unused life expectancy as decided by Halco at its sole discretion. In the absence of anything in writing to the
ntrary claims must be notified to us in writing within 12 months of dispatch ex Halco factory. Halco reserve the right to refuse claims of any nature, arising from any item which has noten operated or maintained strictly in accordance the standard recommendations published in Halco's operating manuals, in particular but not limited to any product which –
* has been subjected to excessive thrust (feed force), rotational torque or rotation speed.* has been operated outside its designated air pressure working range.* has been rendered inoperable or broken by voluntary or involuntary admission of foreign elements into the air line or drill string.* has suffered insufficient or incorrect lubrication or routine maintenance.* has been fitted with any parts, not of Halco manufacture.* has been abused, neglected or subjected to wanton damage, in particular but not limited to the application of heat, weld or direct impact to DTH hammer
components.* has not, where Halco has so requested, been returned for inspection in its entirety.With particular respect to Halco DTH button bits, any button bit which -* has not been reground at necessary intervals commensurate with the nature of the rock being drilled.* in the case of oversize drill bit diameters as defined in Halco's catalogues, have been used in conditions unsuited to their use and/or where shank failurehas occurred.
* has suffered breakage of only one single button.edit against warranty claims will be granted, if proved valid, and will be paid on the basis of the ex warehouse price of the goods as sold. Such credit will exclude items considered asnsequential loss, in particular but not limited to packing, carriage charges, import duties, sales tax, retail profit etc. Halco however retains the right to supply replacement goods insteadts sole discretion. The above only covers goods of Halco's manufacture, whether supplied as separate units or incorporated in manufactured equipment. In the case of goods not of lco manufacture, the Buyer shall be entitled only to the benefit of any supplier warranty given to us in respect of the goods. RETURNED GOODS Goods ordered in error may ONLY be returned for credit providing Halco has given written approval to do so. No goods will be accepted or credit granted onurned goods where our prior approval has not been obtained. The return of rubber based or other perishable goods is prohibited. All goods received by Halco without authorization willreturned to the customer at his cost. Goods returned, with Halco's agreement, will be accepted providing that after inspection they are found to be new and unused and that they haveen returned within 6 months of date of dispatch from our works. A deduction will be made against the value of credit granted, to cover any costs of any nature incurred by Halco, againsturned goods. INDEMNITY The Buyer shall indemnify us against any claims whatsoever for damage and costs and against all liability in respect of any infringement of patent rights resulting from
mpliance with the Buyer's instructions expressed or implied. Copyright in all drawings made by or for us remain our intellectual property and transmission to a third party is notrmitted. Failure to respect Halco copyright will be prosecuted under the law relating to intellectual property rights.
SEVERANCE If any condition herein shall be deemed void for any reason whatsoever, but would be valid if part of its wording were deleted any such conditions shall apply with suchdification as may be necessary to make it valid and effective. DEALS AS A CONSUMER Nothing in these Conditions shall affect the statutory rights of a customer who in relation to us "deals as a consumer" as defined in section 12 of the unfair ntract Terms Act 1977 or any amendment or modification thereof. GOVERNING LAW The Contract shall in all respects be construed in accordance with English Law and the parties submit to the nonexclusive jurisdiction of the Courts of England. These Conditions of Sale supersede any other that pre-dates them.
7/22/2019 TEREX Halco Hammers & Bits[1]
http://slidepdf.com/reader/full/terex-halco-hammers-bits1 35/35
PO Box 25,West Lane,Southowram,Halifax,
HX3 9TW,
Tel : +44 (0) 1422 399900
Fax : +44 (0) 1422 330186
Email : [email protected]
Website : www halcodrilling com