Upload
rolandoemem
View
216
Download
5
Embed Size (px)
Citation preview
formerly Schaffner Test Systems
Company Profileand Product Overview
formerly Schaffner Test Systems
Teseq for EMC Test Solutions: A New Brand Combining Tradition
and Experience with Dynamic and Innovative Development
Teseq is the new name of the Test Systems Division that belonged to the
Swiss-based Schaffner Group until it became an independent company
in the wake of a management buyout on November 27, 2006.
Teseq has retained all of the former Division’s management and emplo-
yees, and their status as direct stakeholders in the company will ensure
intense commitment and a dynamic approach to development.
The new company also continues to stand for customized client sup-
port, proven products and extensive know-how. The Company’s focus
on its core business – EMC test solutions – will be reinforced by a
greater attention to innovation in the area of research and development.
The streamlined size of the enterprise ensures maximum independence,
agility and flexibility.
Around the world, Teseq stands for reliability – the Company’s manage-
ment and employees look forward to proving this every day.
03
Company Profile
04 Results for fast-paced industries
06 Better by design
08 At your side around the world
10 Cutting-edge technology
12 Convenience equals success
14 Service on demand
Product Overview
18 ESD simulators
19 Conducted EMC generators
20 Automotive conducted immunity test systems
22 Harmonics and flicker
23 RF conducted immunity test generator
24 RF power amplifiers
25 EMC antennas
26 EMI measuring receivers
26 Discontinuous interference analyzer with Windows software
27 GTEM/TEM cells
28 Additional products
32 EMC RF test software
34 Reverberation chambers
35 EMC consulting and system integration
36 Calibration and customer services
37 Customer support centers
38 Product standards and Teseq solutions
04
Time and creativity are the high-tech industry’s most precious resources.
05
Results for fast-paced industries
Teseq provides tools of progress.
Teseq delivers test equipment, test systems and end-to-end
solutions especially for fast-evolving technology sectors
that demand rapid, reliable results in compliance with cur-
rent standards. Nowhere is “survival of the fittest” manifested so
dramatically as in the fast-paced high-tech industry. This is precisely
where the benefit of Teseq’s test systems shines through: With
immediate and reliable results, every test is a step forward. Teseq
focuses on the following industries:
Automotive
Industrial electronics
Consumer electronics
Telecommunications
Medical
Aerospace/Defense
In these industries, we primarily serve the following clientele:
Independent test laboratories
In-house test laboratories
Development laboratories
Educational institutions
Rental companies
System integrators
Arlington, TX, 4pm
06
Better by designTeseq test systems for electronics manufacturers.
Teseq develops, produces, markets and implements test
systems for EMC emission and immunity. As pioneers in our
field, we have decades of market experience. Nowhere else will you
find a greater concentration of expertise. Our technologies, know-
how and representation in the influential bodies governing global
standards keep us one step ahead of our competition. Teseq’s test
systems are always cutting-edge and guaranteed to be standards
compliant. Our systems accelerate product development and pro-
duction, shortening your time to market.
Warsaw, 9am
07With the right tool, you can solve any problem.
08
At your side around the world
Teseq is where you are – worldwide.
Teseq stands for legendary Swiss quality and a personal
proximity to our customers worldwide. Through our branch
offices and network of highly qualified representatives, the world’s
most important regions are our home. Our employees speak the
language of their customers, come from the same culture and have
first-hand knowledge of local business conditions. They understand
the needs, the wants and the technical possibilities particular to
each region and are able to offer precisely the services that best
serve our customers in their own markets. The spectrum ranges
from specific and general consulting to knowledge sharing, system
implementation and the development of customized end-to-end
solutions.
Tokyo, 5pm
09We speak your language, wherever you are.
10
Trust is our standard.
11
Cutting-edgetechnology
Teseq equips you for the future.
Teseq is a leader in the application of cutting-edge techno-
logies. Our systems and solutions represent the state-of-the-art
when it comes to compatibility, connectivity, ease of use and
sustainable hardware and software.
Teseq offers an unparalleled scope. We deliver test systems
that meet all relevant standards. Our product suite is the broadest of
its kind anywhere in the world – and that’s not the only reason we
are unique. We also employ state-of-the-art technologies and offer a
modular test system architecture that allows you to build compre-
hensive, integrated and expandable test systems with lasting value.
Add our application software and you have customized solutions at
reasonable prices.
Product highlights
Touch screen for superior user-friendliness
Mobile PDA and Wi-Fi operation
Automated robotic test solutions
Customer-specific, configurable lab automation software
Windows XP based instruments
Modular system architecture
Perth, 8am
12
Convenienceequals success
Teseq optimizes your productivity.
Teseq guarantees robust software. We start with simplicity, reli-
ability and sustainable compatibility. We place special emphasis on a
user-friendly design that enables the use of convenience features to
enhance efficiency. This is true for both our standard software and
our customized, end-to-end system integration solutions. That’s why
Teseq test equipment has easy-to-use software interfaces.
We provide our customers with on-site experts who evaluate and
implement special software products. We offer training programs
that meet your enterprise’s specific training and education needs.
Our instructors are at home in the language and culture of our
customers.
Hamburg, 11am
13The future will render the virtual world real.
14
We take service personally.
15
Service on demandTeseq is a service provider.
Teseq offers a worldwide network of experts who provide
our customers with rapid response and effective communi-
cation. Our portfolio is not limited to a series of specific services.
We offer whatever service our customers need: from consultation,
service and training to the implementation of end-to-end solutions.
It goes without saying that we assist our customers with regular
hardware and software updates and keep them abreast of the latest
standards developments.
Teseq operates its own officially accredited calibration laboratories.
We offer calibration services around the globe, including all related
services, meeting the highest standards of quality.
London, 2pm
formerly Schaffner Test Systems
17
Product Overview
18 ESD simulators
19 Conducted EMC generators
20 Automotive conducted immunity test systems
22 Harmonics and flicker
23 RF conducted immunity test generator
24 RF power amplifiers
25 EMC antennas
26 EMI measuring receivers
26 Discontinuous interference analyzer with Windows software
27 GTEM/TEM cells
28 Additional products
32 EMC RF test software
34 Reverberation chambers
35 EMC consulting and system integration
36 Calibration and customer services
37 Customer support centers
38 Product standards and Teseq solutions
H- and E-field adapter, flexible discharge tips,
custom RC networks, calibration targets, etc.
Mains adapter, custom RC networks,
calibration targets, etc.
NSG 438
NSG 435
Voltage Display Polarity Accessories
30kV air/
contact max.
16.5kV air/9kV
contact max.
Easy to read
touch screen
Easy to read LCD
+/-, alternating
+/-, alternating
ESD simulatorscompact, user-friendly, and ready for tomorrow’s standards
The simulation of electrostatic discharges is an important part of EMC tests for
all types of electronic equipment. Many test standards require pulse voltages of
a few kV to 15kV while the automotive industry has even higher requirements. In
this case, voltages of up to 30kV must be applied to determine the immunity level.
Not only do Teseq’s ESD simulators meet all of today’s requirements, they are also
designed to comply with tomorrow’s standards.
Teseq’s ESD simulators are characterized by a compact and user-friendly design. The NSG 435
and NSG 438 both feature a large, easy to read LCD display that shows the user all necessary
parameters during tests. They can be operated either from rechargeable batteries or from a
mains power supply.
Air and contact discharge operation 200V to 30kV
Touch screen display
Battery-powered
Compliant with industry standards (IEC, ANSI, SAE, ISO, etc.)
Interchangeable network modules
Adjustable discharge detection
ISO self-test function
18
Magnetic field antenna, 3-phase
coupling network, variac, step transformers,
verification attenuators, etc.
Telecom wave, ring wave, damped oscillatory
pulses, 3-phase coupling network, variac,
verification attenuators, etc.
3-phase coupling network, 100A max.
constant current, verification attenuators, etc.
3-phase coupling network, verification
attenuators, etc.
Modula 6100
NSG 2050
NSG 2025
NSG 3025
Surge max.Burst/Fast transient max.
Power quality test (PQT) max. Accessories
4.4kV
6.6kV (8kV opt.)
–
–
4.8kV/1MHz
4.8kV/1MHz
8kV/500kHz
4.8kV/1MHz
Continuous: 16A
Short-term: 25A
Continuous: 16A
–
–
Conducted EMC generatorsinnovative user interface and software simplify test operations
Transient pulses superimposed on power and data cables, power interruptions, and
electromagnetic fields often cause malfunctions in electronic circuits and equip-
ment. Immunity testing can ensure that components, instruments, and systems
function properly during routine operation in conformance with product standards.
Teseq offers an extensive range of pulsed immunity generators as well as coupling
networks, antennas, variacs, and accessories to ensure that interference phenome-
na can be safely and reliably reproduced.
Teseq’s WIN Modula and EMC Suite test software simplify testing procedures and test file pro-
cessing, deliver flexible and adaptable test reports, and offer remote operation.
Comprehensive concept for immunity testing
Meet new IEC/EN standards
Innovative PDA operating concept
Open architecture
TCP/IP communication
Broad assortment of calibration accessories
Windows-based software
19
Capacitive discharge pulse
immunity generator
With its capacitive discharge circuits, the
NSG 5500 takes Teseq’s exclusive Gemini
technology a step further with unique pulse
generating functions, making it the only
solution that meets all ISO 7637-2:2004
immunity requirements.
Integrated battery switch/coupler
100A (250A peak)
Modular system based on Gemini
technology is easy to upgrade
Compliant with “capacitive discharge into
pulse shaping network”
JT 5510/JT 5550 JASO modules and NT
5510 NISSAN module
Automotive pulse 3a/b generator with two
pulse widths of 5/100ns and 5/150ns in
conformance with old and new standards
Generates pulses 1, 2 and supports prior
and current standards as well as pulses 6,
7 for backwards compatibility
The only pulse 5 generator that meets all
load-dump requirements
Battery voltage variation
and noise simulation generator
The NSG 5600, a combination function gene-
rator and power amplifier, makes it possible
to simulate vehicle voltage starting profiles,
voltage dips and drops, transformer-coupled
and other sinusoidal noise, and to conduct
magnetic field immunity tests.
Flexible, powerful, function generators are
simple to program
Modular and expandable up to 4 internal
synchronized function generators
Clone function for the digital recording
and duplication of oscilloscope
wave forms, or for importing from Math-
CAD, Excel, etc.
Direct programming of sine, square,
triangle, and exponential functions, DC
offsets and ramps
Unique functions for transformer-
coupled, sine-wave noise and
magnetic field immunity tests
NSG 5500
NSG 5600
Automotive conducted immunity test systemsmodular design is the key to success
Teseq is the first company to provide compact, modular, standards-compliant
systems, generators with automotive-specific functions, and power amplifiers for
battery simulation during EMC testing.
20
Battery simulator/Power amplifier
Based on years of experience with fast
power amplifiers for the automotive industry,
the PA 5840 has a unique capacitive stability
mode. Teseq test system users will now
enjoy the convenience of a wide range of
functions provided in one device: low impe-
dance, high currents, very high peak inrush
currents, high bandwidth, and stability in the
case of complex, variable loads in vehicle
electrical systems.
Developed specifically for automotive
tests, with capacitive stability mode and
additional unique functions
Output range -15V to +60V
Bandwidth up to 150kHz
Rise time < 10μs, i.e., no additional switch
required for voltage drops and dips for
most dropout applications
Three versions: 25A, 50A, and 100A conti-
nuous
Peak inrush current up to three times
continuous rating for up to 200ms
Rack mountable, modular, and
upgradeable
Immunity test software
AutoStar, Teseq’s leading software for auto-
motive immunity applications, features a test
management platform for controlling capaci-
tive discharge transient simulations, voltage
variations, and other immunity tests.
Optimized for automotive industry EMC
testing
More than 600 pre-programmed
standard tests for international and ma-
nufacturer-specific EMC standards
New tests can be programmed by the
user or downloaded from the Teseq web
site
PA 5840
AutoStar
21
System Power
[kVA]
Max. current outputLow voltage range [A]
High voltage range [A]
No. of output phases
IEC
610
00-3
-2
IEC
610
00-3
-3
IEC
610
00-3
-11
IEC
610
00-3
-12
IEC
610
00-4
-8
IEC
610
00-4
-11
IEC
610
00-4
-13
IEC
610
00-4
-14
IEC
610
00-4
-17
IEC
610
00-4
-27
IEC
610
00-4
-28
IEC
610
00-4
-29
PL 2101 1.25 8 4 1Ph
PL 2103 3 22 11 1Ph
PL 2105 5 37 18 1Ph
PL 2109 9 22 11 3Ph
PL 2115 15 37 18 3Ph
PL 2130 30 74 36 3Ph
PL 2145 45 100 50 3Ph
Harmonics and fl ickerTeseq as a pioneer for manufacturers and test centers
Teseq is a pioneer in the field of harmonics and flicker EMC testing. Manufac-
turers and test centers around the world trust Teseq ProfLine 2100 systems.
The ProfLine 2100 family’s modular design enables Teseq’s customers to configure
customized testing systems. These systems also offer cost-effective solutions for
a wide range of amperages from 1.25kVA to 45kVA per phase.
Real time PC-based power analyzer
1MS/s
Programmable AC/DC voltage source
Large power range 1.25kVA to 45kVA
Harmonic and interharmonic immunity testing in compliance
with IEC/EN 61000-4-13
Voltage drops and interruptions in compliance with IEC/EN 61000-4-11
and IEC/EN 61000-4-34 to 50A per phase
Windows software: WIN 2100 and WIN 2120 for simple testing
procedures, remote control, test file processing, and flexible test reports
22
RF conducted immunity test generator an advanced, compact RF immunity test system
The NSG 4070 is Teseq’s next-generation multifunctional immunity test system. It
replaces the NSG 2070 and offers expanded functionality plus new features. The
NSG 4070 has a broader frequency range of 9kHz to 1GHz and a modular design
which accommodates both internal and external amplifiers. The system can be
used in a wide variety of applications, including tests according to IEC/EN 61000-4-
6 and various BCI applications. The NSG 4070’s signal generator and power meter
can also be used to implement test systems for other applications such as IEC/EN
61000-4-3, IEC/EN 61000-4-20, and IEC/EN 61000-4-21.
Powerful and easy-to-use firmware allows the NSG 4070 to be operated independently. How-
ever, it can also be controlled by an external PC and control software. The USB port in the front
panel can be used with a standard USB memory stick to download test and measurement data
for documentation purposes.
Integrated signal generator 9kHz to 1GHz
4-channel power meter 9kHz to 1GHz
Integrated power amplifier for frequency ranges up to 1GHz and up to 75W
nominal output power
Multiple EUT monitoring options
Internal, menu-based control software
5.7” TFT color display
Optional remote control software
Additional products for conducted RF immunity tests
Teseq offers a wide assortment of coupling/decoupling networks and current injection clamps,
as well as an EM clamp for conducted RF immunity tests. All additional products are designed
to allow the highest possible injected signal levels at moderate input powers. Detailed informa-
tion about additional products can be found on page 26 ff.
23
Features Typical applications
Broadbandpower amplifiers
Power[W]
An
ten
na
mat
ched
, pro
file
d
freq
uen
cy r
esp
on
se
No
min
ally
fla
t fr
equ
ency
re
spo
nse
Sh
ort
- an
d o
pen
-cir
cuit
tole
ran
t
Cla
ss-A
Co
mm
erci
al E
MC
tes
tin
g
Au
tom
oti
ve
Mili
tary
Tele
com
CBA 9477B 15
CBA 9424/25/37 20/30/75
CBA 9423/42 100/200
CBA 9439 100
CBA 9450/35 300/1100
CBA 9426/13B/33 50/100/200
CBA 9434 400
CBA 9436 1000
CBA 9428/82 20/40
CBA 9429/38 75/120
CBA 9480 60
CBA 9481/83 800/250
CBA 9479 17
150kHz 1Ghz
150kHz 80MHz 230MHz 400MHz 800MHz
10kHz 100kHz 1MHz 10MHz 100MHz 1GHz 3GHz
150kHz 230Mhz
1MHz 400Mhz
80MHz 1Ghz
80MHz 1Ghz
800MHz 3Ghz
80MHz 1Ghz
800MHz 3Ghz
10kHz 100Mhz
10MHz 1Ghz
100kHz 1Ghz
10kHz 100Mhz
Frequency range
80MHz 1Ghz
RF power amplifi ershigh reliability at low operating costs
The CBA series is a complete range of solid-state class-A power amplifiers designed
with frequency and power ratings specifically for EMC immunity test applications.
These robust and dependable power amplifiers ensure complete reliability at low
operating costs. Teseq is constantly expanding the CBA series with models that
support new power and frequency ranges. Our specialists are ready to consult with
you regarding your application and custom requirements.
Solid-state class-A operation
Frequency range 10kHz to 3GHz
Reliable, designed and tested for EMC applications
Safe operation during open-circuit and short-circuit
Outputs suitable for EMC loads
24
BiLog®
X-wing BiLog
Biconical
antennas
Loop
antennas
CBL 6111
30MHz to 1GHz
CBL 6112
30MHz to 2GHz
CBL 6140
26MHz to 2GHz
CBL 6144
25MHz to 3GHz
Up to 600W
DPA 3000
800MHz to 2.8GHz
DPA 4000
200MHz to 1GHz
VBA 6106
30MHz to 300MHz
HLA 6120
9kHz to 30MHz
Compact
X-wing BiLog
Log periodic
antennas
DiPole
antennas
Broadband
horn antennas
CBL 6141
30MHz to 2GHz
CBL 6143
30MHz to 3GHz
UPA 6108
300MHz to 1GHz
UPA 6109
200MHz to 1GHz
VDA 6116
30MHz to 300MHz
UHA 9105
300MHz to 1GHz
BHA 9118
1GHz to 18GHz
BHA 9220
200MHz to 2GHz
EMC antennas achieve better results faster
Teseq has an extensive offering of EMC antennas. The
well-known BiLog® antenna, the first ultra wide band EMC
emission measurement antenna, represents an important
milestone in the development of EMC measuring instru-
ments. The BiLog® is a unique combination of a sophistica-
ted matching network and innovative design that provides
significant advantages over conventional EMC antennas.
As a result, measurements can be performed in one pass
without changing the antenna, resulting in a potential test
time savings of up to 30%. Subsequent measurements are
also easier to conduct and more reliable.
25
With its X-Wing® antennas, Teseq has applied the advancements of
the BiLog® antenna to immunity testing. The advantage of running
a complete immunity test with a single antenna provides significant
time savings. Teseq also offers loop antennas, biconical antennas
and broadband horn antennas.
Emission testing
Immunity testing
Wide frequency range
Individually calibrated
Optional accredited calibration
Frequency range 9kHz to 1GHz (SCR 3501)
Frequency range 9kHz to 2.75GHz (SCR 3502)
Compact and portable with built-in battery
Detectors (AV peak, QP)
IF bandwidth 200Hz, 9kHz, 120kHz
SCR 3501
SCR 3502
Frequency range 9kHz to 3GHz (SMR 4503)
Frequency range 9kHz to 18GHz (SMR 4518)
Detectors (AV peak, QP)
IF bandwidth 200Hz, 9kHz, 120kHz, 1MHz
SMR 4503
SMR 4518
Product Technical specifications
EMI measuring receivers compact, portable, multifunctional
All of Teseq’s EMI receivers can be used
in the laboratory to perform CISPR 16 ful-
ly compliant EMC testing and highly sen-
sitive, frequency selective voltage mea-
surements, calibrate other measuring
instruments, and perform attenuation
measurements to verify shielding effect.
They can also be used as components in
automated emission test systems.
26
The SMR series covers a broad frequency range of 9kHz up to 18GHz and provides a compre-
hensive user interface for performing even the most complicated measurements in a quick
and user-friendly manner. These receivers feature a large color display and provide extensive
setup information from the top-level menu. A special feature of the SMR 4503 is its upgrade-
ability to 18GHz.
The SCR series receivers are compact, portable and battery powered, which make them con-
venient to use in automotive and ungrounded test applications.
Even if they do not produce continuous interference, household products, power tools and
other appliances need to be measured for discontinuous interference in the range of 150kHz
to 30MHz. The DIA 1512D is comprised of a base unit and up to six plug-in fixed frequency
receivers, and all components are CISPR 16 compliant. With the DIA, all of the latest CISPR 14
tests can be conducted fully automatically – from determining click rate to analyzing click du-
ration and evaluating results in the form of a pass/fail test report. Since each channel operates
independently of the others, the analyzer may be used to perform simultaneous measure-
ments on different frequencies, dramatically reducing total test time.
CISPR 14 and CISPR 16 compliant
6 measuring channels
Self-calibration prior to every measurement
Modular system
Standard frequencies 150kHz, 500kHz, 1.4MHz, 30MHz
Windows-based ClickWare software (DIS 9966)
Discontinuous interference analyzer with Windows softwaremodular convenience
250mm
250mm
500mm
750mm
1000mm
1250mm
GTEM 250
GTEM 250 SAE
GTEM 500
GTEM 750
GTEM 1000
GTEM 1250
1500mm
1750mm
2000mm
GTEM 1500
GTEM 1750
GTEM 2000
300mmDTEM
150mm
150mm
800mm
SL 50
SL 90
SL 150
300mmTPL 3000
Product Septum height
DC to 20GHz
DC to 20GHz
DC to 400MHz
10kHz to 1GHz
10kHz to 1GHz
Frequency range
GTEM/TEM cellscustomizable, fast and effi cient
Teseq offers GTEM/TEM test cells for
EMC emission and immunity testing in
a shielded environment in accordance
with IEC/EN 61000-4-3 and IEC/EN
61000-4-20. Pre-certification tests can
be conducted during development in
compliance with IEC/EN 55022, VDE
0871, and other standards. Teseq’s
GTEM/TEM cells generate largely homo-
genous and simple to calculate fields
with an excellent VSWR over the entire
frequency range.
27
High field strengths at low amplifier output
No need to measure reflected power
Only simple single-channel power meters required
Reduced test time
Customized configurations
Frequency range DC to 20GHz
30MHz to 1GHz
1GHz to 18GHz
800MHz to 3GHz
30MHz to 3GHz
VSQ 1000
VSQ 2000
VSQ 3000
GVSQ 3002
30MHz to 1GHzKSQ 1000
150kHz to 2GHzCNE 6500B
1MHz to 1GHz
1GHz to 18GHz
1GHz to 6GHz
RSG 1000
RSG 2000
RSG 3000
Product Frequency range
Comparison radiation sources
Spherical radiation source
Comparison noise emitter
Reference voltage generators
Additional productsthe right choice for every need
Reference sources
In addition to EMC test systems meeting standards requirements, it is often necessary to com-
pare system performance of individual test setups and test sites. Teseq offers a wide range of
reference source products to meet these requirements.
Battery-powered
Ungrounded use
Reference calibrations available
28
RF switch networks
Teseq RF switch networks can be configured to switch RF signals in a wide range of automatic
test systems. Individual switches can connect one input to 2, 4, 6, or 8 outputs. Multiple swit-
ches can be configured in a mainframe, making the number of switch configurations virtually
unlimited. All RF switch networks are characterized by high quality and an operating life of at
least one million switch cycles.
Frequency range up to 18GHz
Simple control via IEEE488 interface
Listener and talker functionality
Actual switch positions are readable
Mainframe can hold up to 12 switch units
Virtually unlimited switch configurations
RFB/RFC 2000
Coupling/decoupling networks (CDN) in
compliance with IEC/EN 61000-4-6
IEC/EN 61000-4-6 specifies the design and per-
formance of a wide range of coupling and
decoupling networks (CDNs). Each CDN is
specific to a particular type of cable and signal.
Teseq offers an extensive range of CDNs
which fully comply with the requirements
of the standard and provide a simple and
reliable method of injecting RF energy into
the equipment under test. CDNs can also be
used for emission testing. Special types fulfill
CISPR/F/399/CDV (CISPR 15) requirements to
300MHz.
IEC/EN 61000-4-6 compliant
Frequency range 150kHz to 230MHz
Wide range of special models and
connector types
CDN types: M, S, T, AF, ST, USB and CAN
EUT AC voltages up to 250V
RF voltages to 30V max.
Calibration adapters available
Impedance stabilization networks (ISN)
compliant with CISPR 22 Ed. 5.0
Impedance stabilization networks (ISNs) are
used for emission measurement on tele-
communication lines. Teseq offers a wide
range of ISNs for CISPR 22 Ed. 5.0. Adapter
sets are available for shielded or unshielded
cables with connector types BNC, RJ11 or
RJ45. T-type ISNs for unshielded, balanced
wire pairs are supplied with LCL adapters for
cable categories 3 and 5.
Frequency range 150kHz to 230MHz
Emission measurements on balanced wire
pairs
CISPR 22 Ed. 5.0/EN 55022:2003
compliant
Support all common connector types
Models support 1 to 8 lines
CDN
ISN
29
Decoupling and absorbing clamps
Decoupling clamps are available for a variety of different EMC applications.
They can provide additional isolation of the test signal from the auxiliary
equipment during immunity testing. For emission testing, they are used as
terminations on all cables coming from the equipment under test, thus creating
a more repeatable test setup.
Max. operating current 25A
3 models 150kHz to 1GHz
Absorbing clamps are used for measuring interference signals on power supply cables of
household appliances according to CISPR 14, and are CISPR 16 compliant. They can be used
in manual as well as automated measuring fixtures.
Frequency range 30MHz to 1000MHz
Current sensing probe
RF current sensing probe CSP 9160 for measurements according to CISPR 22
or BCI with a transfer impedance of 1 . The CSP 9160 is the probe of choice for conducted
emission measurements.
Frequency range 10kHz to 100MHz
Emission testing
CISPR 16 compliant
CMAD 10
CMAD 20
KEMA 801
AMZ 41
CSP 9160
CVP 2200
NNB 41/NNB 42 Line impedance stabilization networks (LISN)
In emission tests, EUT cables must be terminated with a defined RF impedance. Line impe-
dance stabilization networks (LISNs) provide the defined impedance
so that the interference voltage of the equipment under test can be measured in
a reproducible manner.
Frequency range 9kHz to 30MHz
V-network
EUT voltage up to 240V single phase, 450V 3-phase
EUT current up to 16A single phase, 32A 3-phase
EUT supply frequency up to 63Hz
Capacitive voltage probe
Capacitive voltage probe CVP 2200 according to CISPR 22. Active probe with
switchable gain.
Frequency range 100kHz to 30MHz
Emission testing
CISPR 16 compliant
Additional products30
Near field probe set
The near field probe set is a diagnostic tool
kit for detecting electrical and magnetic
interference fields. The set includes three
hand-held probes (two magnetic fields and
one electric field) for a frequency range of
9kHz to 1GHz, 30dB pre-amplifier, power
supply, and a test fixture. When used in
conjunction with a spectrum analyzer or
measuring receiver, the probes can locate
and evaluate electromagnetic interference
sources.
Frequency range 9kHz to 1GHz
Emission testing
Development tool
Pre-amplifier
The pre-amplifier model series is invalu-
able for the measurement of low signal
strengths. These pre-amplifiers offer a
wide bandwidth, high gain, and a low noise
figure. They are essential for radiated field
strength measurements using spectrum
analyzers, together with low sensitivity/
small gain broadband antennas.
Frequency range 9kHz to 3GHz
Emission testing
N-connectors
RF accessories
Teseq offers an extensive range of acces-
sories for various EMC applications.
The RF power meters, tripods, antenna
adapters, pulse limiters, etc. that are used
in EMC systems are not included herein.
Wide array of RF accessories,
including DCP 0100, CHA 9652,
ATN series, CFL 9206
NFPS1
CFL 9206
RFP 4001*
RFP 4002*
CPA 9231CPA 9232
* special design for Teseq receivers
31
The user can configure the program for any type of test (commercial, automotive, military,
telecommunications, etc.) and set up customized and optimized testing processes. The Emis-
sion Assistant feature allows the user to clone existing standard tests, modify them, and then
save or run the result through an interactive check box system.
Fully featured, infinitely flexible
Applicable to all market segments
User can create new instrument drivers
Complex hardware configurations using multiple receivers/spectrum analyzers
Unlimited mechanical handling devices (antenna masts, turn tables, etc.)
Choice of test report generating tools provides fast configurable reports
Compliance 3 Emission
Extremely complex hardware configurations with multiple frequency-specific test segments
can be displayed and checked prior to conducting testing. Special monitoring functions en-
sure the reliability and functionality of the test equipment as well as the EUT, thus maximizing
test efficiency.
Supports virtually any hardware
Hardware configuration and test setup displayed in simple graphical format
Administrator controls all user access
Locked down test, factor files, etc. ensure consistency
Access to raw data and factor file information on a frequency point basis allows
checking of data manipulation
Supports most languages
Help desk support and comprehensive web site
Compliance 3 Immunity
EMC RF test softwarefaster automated results
Compliance 3
Windows-based Compliance 3 is a new and creative approach to the operation of
RF emission and immunity test systems for EMC applications. Compliance 3’s open
architecture allows users to select from Teseq’s comprehensive suite of pre-pro-
grammed standards-compliant test methods, or to design their own custom test
methods. Compliance 3’s most unique feature is the flexibility of its EUT monitoring
capability, which allows the user to more completely automate the test process.
Teseq also offers application specific versions of Compliance 3: Emipak 3 for low
cost, pre-compliance emission testing and GTEM 3 for emission and immunity
testing in GTEM cells.
32
Based on the Compliance 3 package, Emipak 3 is configured for low cost, pre-compliance
emission testing. The program includes pre-defined test procedures as well as an Assistant
feature that leads the user through the process of creating a new test.
Easy to operate user interface
Pre-configured
Pre-compliance RF conducted and radiated emission testing
Results presented simply and clearly
Can be upgraded to Compliance 3 Emission
Emipak 3
These versions of Compliance 3 are optimized for conducting immunity or emission testing in
a GTEM cell. The Immunity package features pre-defined hardware configurations and a four
step menu to lead the user through defining and running a test. With the Emission package
and an EUT manipulator, the EUT can be automatically positioned into each of the orthogonal
X, Y and Z planes. The program records the three files and simulates final data on an open
area test site (OATS).
Easy to operate user interface
Pre-configured
Supports conducted and radiated testing
Results presented simply and clearly
Can be upgraded to full Compliance 3 versions
GTEM 3 Emission and Immunity
33
Model S
Model M
Model L
Model range Technical specifications
Model S, M, or L screened room
Mode tuner with stepping motor
Control software
Shield test of the screened room
Custom room sizes
Shielded control room
Antennas and tripods from Teseq
Calibration and performance tests
per various standards
Turnkey systems
Standard configuration Options
2.5 x 4 x 2.55m, LUF 200MHz,
max. EUT volume 1m3
3.1 x 7 x 2.55m, LUF 100MHz,
max. EUT volume 4m3
12.5 x 5.5 x 4m, LUF 80MHz,
max. EUT volume 30m3
Other sizes and upgrades of existing screened rooms to a reverberation chamber on request.
Reverberation chamberspowerful software delivers automatic effi ciency
Reverberation chambers (RCs) are modern EMC test environments in addition to
the established methods like semi- or full anechoic rooms, open area test sites or
(G)TEM cells. They can be used for emission and immunity testing.
Wide frequency range 100MHz to > 18GHz
Excellent field homogeneity (< 3dB)
Full and pre-compliance testing
Radiated emission and immunity measurements
Stirrer optimized by numerical analysis
Continuous or stepped rotation
Calibrated per IEC/EN 61000-4-21 and various other standards
Powerful control software for automated system operation
Consulting, calibration and services
34
Supported standards
IEC/EN 61000-4-21
RTCA DO 160 D/E
MIL461E
GMW3097
ES-XW7T-1A278-AC
Others on request
One of the most important points during establishment, calibration, and final use of a rever-
beration chamber is the calibration, control and evaluation software. Using Teseq’s powerful
system software (C++ based) Compliance 3, these procedures are solved comfortable and
time effective, e.g.:
Individual equipment configuration for the reverberation chamber system
Complex EUT test sequences can be defined on worksheets
Different test segments can be created, any details are stored in an input window
Results are displayed simultaneously in graphical and tabular form
Powerful test report generator and measurement data export options
Powerful control software
Consultation and quotationSystem design and
implementaionInstallation, maintenance
and support
EMC consulting and system integrationreliability in every phase
Meeting today‘s EMC compliance requirements is an extensive and complex task.
There are numerous standards and requirements depending upon product, ap-
plication and territory. Most manufacturers and test laboratories do not have the
resource to define a complex EMC test system to meet their needs. This leads to
considerable risk when selecting and constructing an EMC test laboratory.
Teseq offers a complete solution for EMC test facilities and guarantees full service over the
entire product life – from site surveys and hardware/software configuration to start-up, final
acceptance, training and calibration. Its extensive knowledge of EMC systems can be seen
around the world with hundreds of systems installed in application fields such as automotive,
telecommunications, commercial, military and medical.
Complete integration of Teseq and third party EMC equipment
Global experience, purchasing, logistics, consultancy and support
Expertise in automotive, medical, military and telecommunications
applications and many more
Hundreds of systems installed worldwide
Dedicated EMC specialists to evaluate current and future requirements
35
Calibration and customer servicesworldwide, fast and cost-effective
For fast-turnaround calibration and repair of all your commonly used EMC test
equipment, choose Teseq’s calibration and customer services. The most extensive,
single-source service for the calibration of RF and conducted EMI test equipment in
the world, Teseq provides test laboratories with fast, reliable, high quality service.
Teseq’s extensive worldwide EMC calibration and repair capability is built on our own high
quality standards and longstanding engineering experience. We operate own laboratories,
most of them accredited to national and international standards, and offer both accredited and
traceable calibration services. All have full test and repair facilities for our EMC equipment. We
test and calibrate other manufacturers’ equipment as well.
Teseq guarantees 10 years of calibration and repair service from the date of purchase and
minimal downtime for the customer. Our experts are also available for customer-specific
consulting and training.
Teseq also offers the following services around the globe:
On-site calibration*
Repair
Training
Consulting
Equipment rental*
Television antenna benchmarking*
* Not available at all sites
Accreditation gives confidence in the competence of a calibration laboratory.
Accreditation provides confidence in certificates and reports by implementing widely accepted
criteria set by the European (CEN) or international (ISO) standardization bodies. The standards
address issues such as impartiality, competence and reliability; leading to confidence in the
compatibility of certificates and reports across national borders.
36
Switzerland Germany UK USA Singapore China Japan
SA
S a
ccre
dit
atio
nEN
ISO
/IEC
170
25
Trac
eab
le
DK
D a
ccre
dit
atio
nEN
ISO
/IEC
170
25
Trac
eab
le
UK
AS
acc
red
itat
ion
EN IS
O/I
EC 1
7025
Trac
eab
le
A2L
A a
ccre
dit
atio
nEN
ISO
/IEC
170
25
Trac
eab
le
Trac
eab
le
Trac
eab
le
Trac
eab
le
ESD pulses, e.g. IEC 61000-4-2 to 30kV
Burst pulses, e.g. IEC 61000-4-4 to 8kV
Surge pulses, e.g. I EC 61000-4-5 to 10kV
Mains drop-outs and dips, e.g. IEC 61000-4-11
Mains drop-outs and dips, DC, IEC 61000-4-29
Automotive pulse generators
Power amplifiers
Electric field strength 10kHz to 1000MHz,1 to 30V/m
Field strength probes DC to 6GHz
EMI measuring receivers
TEM wave guides (e.g. GTEM cells), IEC 61000-4-20
Chambers
Coupling and decoupling networks(LISNs, ISNs, CDNs, clamps)
Current clamps
Directional couplers
RF probes, RF pre-amplifiers and attenuators
RF site calibration
Antennas
LVD testers
Harmonics and flicker
On-site conducted EMC calibration
Customer support centerssupporting you worldwide
The accredited calibration service is designed for accredited test laboratories. It is based
on calibration equipment, procedures, measurement uncertainties and personnel which have
all been assessed by a national accreditation authority to ensure accuracy of measurement.
The traceable calibration service is ideal for all types of commercial and in-house test la-
boratories. It uses similar traceable measurement equipment, and almost the same processes.
Both accredited and traceable calibration services are in line with the recommendations of
EN ISO/IEC 17025. The capabilities of each Teseq support center are listed below.
37
Commercial & Industrial
EN 61000-6-1 IEC 61000-6-1 Generic immunity standard Residential, commercial and light industrial environment
EN 61000-6-2 IEC 61000-6-2 Generic immunity standard Industrial environment
EN 61000-6-3 IEC 61000-6-3 Generic emission standard Residential, commercial and light industrial environment
EN 61000-6-4 IEC 61000-6-4 Generic emission standard Industrial environment
EN 61000-3-2 IEC 61000-3-2 Basic emission standard Harmonic currents
EN 61000-3-3 IEC 61000-3-3 Basic emission standard Voltage fluctuations and flicker
EN 61000-3-11 IEC 61000-3-11 Basic emission standard Voltage fluctuations and flicker
EN 61000-3-12 IEC 61000-3-12 Basic emission standard Harmonic currents
EN 61000-4-2 IEC 61000-4-2 Basic immunity standard Electrostatic discharge
EN 61000-4-3 IEC 61000-4-3 Basic immunity standard Radiated RF field
EN 61000-4-4 IEC 61000-4-4 Basic immunity standard Electrical fast burst transients
EN 61000-4-5 IEC 61000-4-5 Basic immunity standard Surge
EN 61000-4-6 IEC 61000-4-6 Basic immunity standard Conducted RF
EN 61000-4-8 IEC 61000-4-8 Basic immunity standard Power frequency magnetic field
EN 61000-4-9 IEC 61000-4-9 Basic immunity standard Pulse magnetic field
EN 61000-4-11 IEC 61000-4-11 Basic immunity standard AC voltage dips, interruptions and variations < 16A per phase
EN 61000-4-12 IEC 61000-4-12 Basic immunity standard Ring waves and oscillatory waves
EN 61000-4-13 IEC 61000-4-13 Basic immunity standard Harmonics and interharmonics
EN 61000-4-14 IEC 61000-4-14 Basic immunity standard Voltage fluctuations
EN 61000-4-20 IEC 61000-4-20 Basic immunity and emission standard Transverse electromagnetic (TEM) waveguides
EN 61000-4-21 IEC 61000-4-21 Basic immunity and emission standard Reverberation chamber test methods
EN 61000-4-27 IEC 61000-4-27 Basic immunity standard Voltage unbalance
EN 61000-4-28 IEC 61000-4-28 Basic immunity standard Variation of power frequency
EN 61000-4-29 IEC 61000-4-29 Basic immunity standard DC voltage dips, interruptions and variations
EN 61000-4-34 IEC 61000-4-34 Basic immunity standard AC voltage dips, interruptions and variations > 16A per phase
EN 55011 CISPR 11 Product family emission standard Industrial scientific and medical (ISM) radio frequency equipment
EN 55013 CISPR 13 Product family emission standard Broadcast receivers and associated equipment
EN 55014-1 CISPR 14-1 Product family emission standard Household appliances, electric tools and similar
EN 55014-2 CISPR 14-2 Product family immunity standard Household appliances, electric tools and similar
EN 55015 CISPR 15 Product family emission standard General lighting equipment
EN 55020 CISPR 20 Product family immunity standard Broadcast receivers and associated equipment
EN 55022 CISPR 22 Product family emission standard Information technology equipment
EN 55024 CISPR 24 Product family immunity standard Information technology equipment
ANSI IEEE C62.41 Recommended practice in low voltage AC power circuits
Scope Area of use
Automotive
EN 55025 CISPR 25 Vehicle and component RF emission tests
ISO 11451 Vehicle RF immunity tests
ISO 11452 Component RF immunity tests
SAE J1113 Component emission and immunity tests
ISO 7637 Component conducted emission and immunity tests
ISO 10605 Electrostatic voltage immunity in road vehicles
ISO 16750-2 Stress testing of electronic systems and components
2004/104/EC EC type-approval – "e" marking for components
Telecommunications
Bellcore EMC and electrical safety – generic criteria for network telecom equipment
FCC Connection of terminal equipment to the telephone network
ETSI EMC for telecom equipment
ITU – K series Immunity of telecom equipment
Product standards and Teseq solutionsselection of the most commonly used standards
38
EN 61000-6-1 IEC 61000-6-1
EN 61000-6-2 IEC 61000-6-2
EN 61000-6-3 IEC 61000-6-3
EN 61000-6-4 IEC 61000-6-4
EN 61000-3-2 IEC 61000-3-2
EN 61000-3-3 IEC 61000-3-3
EN 61000-3-11 IEC 61000-3-11
EN 61000-3-12 IEC 61000-3-12
EN 61000-4-2 IEC 61000-4-2
EN 61000-4-3 IEC 61000-4-3
EN 61000-4-4 IEC 61000-4-4
EN 61000-4-5 IEC 61000-4-5
EN 61000-4-6 IEC 61000-4-6
EN 61000-4-8 IEC 61000-4-8
EN 61000-4-9 IEC 61000-4-9
EN 61000-4-11 IEC 61000-4-11
EN 61000-4-12 IEC 61000-4-12
EN 61000-4-13 IEC 61000-4-13
EN 61000-4-14 IEC 61000-4-14
EN 61000-4-20 IEC 61000-4-20
EN 61000-4-21 IEC 61000-4-21
EN 61000-4-27 IEC 61000-4-27
EN 61000-4-28 IEC 61000-4-28
EN 61000-4-29 IEC 61000-4-29
EN 61000-4-34 IEC 61000-4-34
EN 55011 CISPR 11
EN 55013 CISPR 13
EN 55014-1 CISPR 14-1
EN 55014-2 CISPR 14-2
EN 55015 CISPR 15
EN 55020 CISPR 20
EN 55022 CISPR 22
EN 55024 CISPR 24
ANSI IEEE C62.41
ESD
gen
erat
ors
Co
nd
uct
ed E
MC
ge
ner
ato
rs
Au
tom
oti
ve c
on
du
cted
im
mu
nit
y te
st s
yste
ms
Har
mo
nic
s an
d f
licke
r
RF
con
du
cted
imm
un
ity
test
gen
erat
or
RF
po
wer
am
plif
iers
EMC
mea
suri
ng
ante
nn
as
EMI m
easu
rin
g re
ceiv
ers
Dis
con
tin
uo
us
inte
rfer
ence
an
alyz
er
GTE
M/T
EM c
ells
Rev
erb
erat
ion
cham
ber
s
EMC
RF
test
so
ftw
are
EN 55025 CISPR 25
ISO 11451
ISO 11452
SAE J1113
ISO 7637
ISO 10605
ISO 16750-2
2004/104/EC
Bellcore
FCC
ETSI
ITU – K series
Commercial & Industrial
39
To find your local partner within Teseq’s global network, please go to www.teseq.com
691-001B Mar 2007
© 2007 TeseqSpecifications subject to change without notice. All trademarks recognized.
HeadquartersTeseq AG4542 Luterbach, SwitzerlandT +41 32 681 40 40F +41 32 681 40 [email protected]
Why buy from Teseq?Decades of market experience
Industry experts active in establishing global standards
Best-of-breed products
Modular architecture
Excellent price-to-performance ratio
User-friendly software solutions
Widest range of local services around the globe
Shared language and culture with our customers
ChinaTeseq Limited CompanyT +86 10 6510 1772F +86 10 6510 [email protected](as of Apr 2007)
FranceTeseq SarlT +33 1 39 47 42 21F +33 1 39 47 40 [email protected]
GermanyTeseq GmbHT +49 30 5659 8835F +49 30 5659 [email protected]
JapanTeseq K.K.T +81 3 5456 8929F +81 3 5456 [email protected]
SingaporeTeseq Pte Ltd.T +65 6846 2488F +65 6841 [email protected]
SwitzerlandTeseq AGT +41 32 681 40 50F +41 32 681 40 [email protected]
UKTeseq Ltd.T +44 845 074 0660F +44 845 074 [email protected]
USATeseq Inc.T +1 732 417 0501F +1 732 417 0511Toll free +1 888 417 [email protected]
Teseq is an ISO-registered company. Its products are designed and manu-factured under the strict quality andenvironmental requirements of the ISO 9001.
This document has been carefully checked. However, Teseq does not assume any liability for errors or inaccuracies.