Test Results for Cisco Unified Communications System … · NTP NetworkTimeProtocol OBTP OneButtonToPush OM OperationsManager OSD OnScreenDisplay P2P Peer-to-Peer Test Results for

Test Results for Cisco Unified Communications System Release 11.0Phase II for JapanFirst Published: September 15, 2015

Last Modified: November 19, 2015

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883

© 2015 Cisco Systems, Inc. All rights reserved.

C O N T E N T S

C H A P T E R 1 Cisco Unified Communications System Test 1

Cisco Unified Communications System Test 1

Cisco Unified Communications System Test for Japan 2

Acronyms 3

C H A P T E R 2 Test Topology and Environment Matrix 11

Test Topology 12

Environment Matrix 13

Open Caveats 17

What's New? 17

C H A P T E R 3 Test Results Summary 21

Cisco Unified Communications Manager 21

Cisco TelePresence Video Communication Server 44

Cisco Jabber for iPhone and iPad 80

Cisco Jabber for Android 84

Cisco Jabber for Windows 88

Cisco Jabber for Mac 91

Cisco TelePresence Management Suite 96

Cisco TelePresence Conductor 104

Cisco TelePresence Server 112

Cisco Prime Collaboration 120

Cisco Prime Collaboration Provisioning 120

Cisco Prime Collaboration Assurance 147

Cisco Prime Collaboration Analytics 156

Related Documentation 162

Test Results for Cisco Unified Communications System Release 11.0 Phase II for Japan iii

Test Results for Cisco Unified Communications System Release 11.0 Phase II for Japaniv

Contents

C H A P T E R 1Cisco Unified Communications System Test

• Cisco Unified Communications System Test, page 1

• Cisco Unified Communications System Test for Japan, page 2

• Acronyms, page 3

Cisco Unified Communications System TestCisco Unified Communications System Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified system-level solution for the various products and platforms inthe Cisco Unified Communications System.

Cisco Unified Communications System Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams, when combined, improves theUnified Communications System software quality. This is achieved by testing the different components.

The requirements for Cisco Unified Communications System Test is derived based on the following:

• Popular customer scenarios

• Input from various Business Units, fields and Cisco Services

The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as a part of Cisco UnifiedCommunications System Test are:

• Interoperability/Compatibility

• Functionality

• Availability/Reliability/Stability

• Performance/Scalability/Capacity

• Usability/Serviceability

• Special focus area - CAP (Customer Assurance Program)/Technical Assistance Center (TAC)

• Security

Test Results for Cisco Unified Communications System Release 11.0 Phase II for Japan 1

Cisco Unified Communications System Test for JapanCisco Unified Communications System Test for Japan, in turn is an add-on testing at the solution level, wherethe requirements gathered are specific to Japanese usage and market. The requirements are derived based onthe following:

• Customer found defects in selected UC products

• High priority cases that are covered by the Cisco Unified Communications System Test team

• Inputs from SE's and TAC team of Cisco Japan

The test execution is carried out on selected UC products, which affects the Japanese segment and that areprioritized by SE's of the Cisco Japan team. Japanese specific equivalents such as Japanese locale, ISDNSwitch type being NTT and JPNP for Numbering Plan are implemented.

The objective of Cisco Unified Communications System Test for Japan is to run a sub-set of system testingthat is not covered by Cisco Unified Communications System Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, selected Cisco Compatible Products and third partyequipment.

In this Cisco Unified Communications System Test release for Japan, the following components are tested.

• Cisco Unified Communications Manager

• Cisco IP Phones

• Cisco TelePresence Video Communication Server

• Cisco TelePresence Video Communication Server Expressway

• Cisco Jabber for iPhone and iPad

• Cisco Jabber for Android

• Cisco Jabber for Windows

• Cisco Jabber for Mac

• Cisco Unified Communications Manager IM and Presence

• Cisco Unity Connection

• Cisco TelePresence Management Suite

• Cisco TelePresence Conductor

• Cisco TelePresence Server

• Cisco TelePresence Endpoints

• Cisco Prime Collaboration

Test Results for Cisco Unified Communications System Release 11.0 Phase II for Japan2

Cisco Unified Communications System TestCisco Unified Communications System Test for Japan

AcronymsDescriptionAcronym

Advanced Audio Coding - Low DelayAAC-LD

Automated Alternate RoutingAAR

Automatic Call DistributionACD

Alternate Contact NumberACN

Active DirectoryAD

Automatic Gain ControlAGC

Audible Message Waiting IndicatorAMWI

Alternate Network Address TranslationANAT

Adaptive Security ApplianceASA

American Standard Code for Information InterchangeASCII

Analog Telephone AdapterATA

Bulk Administration ToolBAT

Binary Floor Control ProtocolBFCP

Busy Lamp FieldBLF

Certificate AuthorityCA

CDR Analysis and ReportingCAR

Channel Associated SignalingCAS

Call Control DiscoveryCCD

Cisco Desktop AdministratorCDA

Cisco Discovery ProtocolCDP

Call Detail RecordCDR

Caller Entered DigitsCED

Call Forward AllCFA

Call Forward BusyCFB

Customer Found DefectCFD

Call Forward No AnswerCFNA

Call Forward No CoverageCFNC

Call Forward UnregisteredCFUR

Cisco Unified IP CommunicatorCIPC


Cisco Unified Communications System TestAcronyms

DescriptionAcronym

Cisco Jabber for AndroidCJA

Cisco Jabber for iPhoneCJI

Cisco Jabber for MacCJM

Cisco Jabber for iPadCJIPad

Cisco Jabber for WindowsCJW

Cisco Jabber for Windows WebEx MeetingCJWWM

Command Line InterfaceCLI

Calling Line IdentificationCLID

Client Matter CodeCMC

Call Management RecordCMR

Clustering over WANCoW

Cisco Prime CollaborationCPC

Client Services FrameworkCSF

Cross Site Request ForgeryCSRF

Calling Search SpaceCSS

Computer Telephony InterfaceCTI

Computer Telephony IntegrationCTI

Certificate Trust ListCTL

Cisco Unified Border ElementCUBE

Cisco Unity ConnectionCUC

Cisco Unified Communications ManagerCUCM

Cisco Unified Communications Manager IM and PresenceCUCM IM and Presence

Cisco Unified PresenceCUP

Cisco Unified Personal CommunicatorCUPC

Cisco Unified Customer Voice PortalCVP

Cisco WebEx Meetings ServerCWMS

Directed Call ParkDCP

Device and Credential RepositoryDCR

Dynamic Host Configuration ProtocolDHCP

Direct In-Ward DialingDID

Directory NumberDN



DescriptionAcronym

Dialed Number AnalyzerDNA

Do Not DisturbDND

Domain Name ServerDNS

Delayed OfferDO

Digital Private Network Signaling SystemDPNSS

Disaster Recovery SystemDRS

Differentiated Services Code PointDSCP

Device Work CenterDWC

Extended Display Identification DataEDID

Emergency Location Identification NumberELIN

Enterprise License ManagerELM

Extension MobilityEM

Extension Mobility Cross ClusterEMCC

Early OfferEO

Cisco Enhanced Survivable Remote Site TelephonyE-SRST

Forced Authorization CodeFAC

Far End Camera ControlFECC

Federal Information Processing StandardsFIPS

Fully Qualified Domain NameFQDN

Foreign Exchange OfficeFXO

Foreign Exchange StationFXS

Graphical User InterfaceGUI

GatewayGW

High AvailabilityHA

High DefinitionHD

Historical ReportingHR

Hyper Text Markup LanguageHTML

Hyper-Text Transfer ProtocolHTTP

Hyper Text Transfer Protocol SecureHTTPS

Inter Cluster TrunkICT

Identity ProviderIdP



DescriptionAcronym

Instant MessagingIM

IP Phone MessengerIPPM

IP Service Level AgreementsIPSLA

Integrated Services Digital NetworkISDN

Indian Standard TimeIST

Initial Trust ListITL

Interactive Voice ResponseIVR

Key Expansion ModuleKEM

Log Collection CenterLCC

Lightweight Directory Access ProtocolLDAP

Light Emitting DiodeLED

Media Convergence ServerMCS

Multipoint Control UnitMCU

MultiDimensional eXpressionsMDX

Managed File TransferMFT

Media Gateway Control ProtocolMGCP

Multilevel Precedence and PreemptionMLPP

Music On HoldMOH

Mobile and Remote AccessMRA

Media Resource Group ListMRGL

Managed Service ProviderMSP

Maximum Transmission UnitMTU

Message Waiting IndicatorMWI

Network Interface and Configuration EngineNICE

Non Linear ProcessingNLP

New Technology LAN Manager version 2NTLMv2

Network Time ProtocolNTP

One Button To PushOBTP

Operations ManagerOM

On Screen DisplayOSD

Peer-to-PeerP2P



DescriptionAcronym

Product Authorization KeyPAK

Personal Communication AssistantPCA

Prime Collaboration DeploymentPCD

PC over IPPCoIP

Personal Identification NumberPIN

Personal MultipartyPMP

Plain Old Telephony SystemPOTS

Primary Rate InterfacePRI

Provisioning Northbound InterfaceProvisioning - NBI

Problem Reporting ToolPRT

Public Switched Telephone NetworkPSTN

Quality Report ToolQRT

Q-Signaling protocolQSIG

Remote Desktop ProtocolRDP

Really Simple SyndicationRSS

Real Time Control ProtocolRTCP

Real Time Monitoring ToolRTMT

Realtime Transport ProtocolRTP

Security Assertion Markup LanguageSAML

Skinny Client Control ProtocolSCCP

Severely Conceal Seconds RatioSCSR

Standard DefinitionSD

Selsius Ethernet PhoneSEP

Secure File Transfer ProtocolSFTP

Session Initiation ProtocolSIP

Small and Midsize BusinessSMB

Shared MultipartySMP

Simple Network Management ProtocolSNMP

Cisco Unified Survivable Remote Site TelephonySRST

Secure ShellSSH

Secure Socket LayerSSL



DescriptionAcronym

Single Sign OnSSO

Technical Assistant CenterTAC

Transmission Control ProtocolTCP

Transport Layer SecurityTLS

TelePresence Management SuiteTMS

TelePresence Management Suite Provisioning ExtensionTMSPE

Time of Day RoutingTODR

Trust Relay PointTRP

TelePresence ServerTS

Telephony User InterfaceTUI

Cisco Unified Contact Center EnterpriseUCCE

Cisco Unified Contact Center ExpressUCCX

Unified Computing SystemUCS

User Datagram ProtocolUDP

User Data ServiceUDS

Unified Messaging GatewayUMG

Cisco Unified Communications ManagerUnified CM

Uniform Resource IdentifierURI

Coordinated Universal TimeUTC

Cisco TelePresence Video Communication ServerVCS

Voice GatewayVGW

Virtual MachineVM

Voice Mail NotificationVMN

View Mail for OutlookVMO

Voice over IPVoIP

Voice Profile for Instant MessagingVPIM

Virtual Private NetworkVPN

Video SLA Assessment AgentVSAA

TelePresence Server on VMVTS

Wide Area NetworkWAN

Wireless FidelityWi-Fi



DescriptionAcronym

Extensive Application Programming InterfacexAPI

Extensible Markup LanguageXML





C H A P T E R 2Test Topology and Environment Matrix

• Test Topology, page 12

• Environment Matrix, page 13

• Open Caveats, page 17

• What's New?, page 17


Test TopologyFigure 1: Topology in Use


Test Topology and Environment MatrixTest Topology

Environment MatrixVersionComponentApplications

11.0.1.20000-2VersionCisco Unified CommunicationsManager

Call Control

11.0.1.1000-1Locale

3-1-9.JPDial Plan

10.5VersionCiscoUnified Survivable RemoteSite Telephony (SRST)

15.5.3 MIOS

X8.6VersionCisco TelePresence VideoCommunication Server (VCS)

vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

X8.6VersionCisco TelePresence VideoCommunication ServerExpressway (VCS Expressway) vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

X8.6VersionCisco TelePresence VideoCommunication ServerExpressway on VM vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

11.0.1.10000-6VersionCisco Unified CommunicationsManager IM and PresenceService

Applications

11.0.1.1000-1Locale

11.0.1.20000-2VersionCisco Unity ConnectionVoice Mail andUnifiedMessaging 11.0.0.1-1Locale

11.0.0.815VersionCisco Prime CollaborationProvisioning

NetworkManagement

11.0.62092VersionCisco Prime CollaborationAssurance and Analytics


Test Topology and Environment MatrixEnvironment Matrix

VersionComponentApplications

9-4-1SR1-3Cisco Unified SIP Phone 3905End Point

9-4-1-3SR2Cisco Unified IP Phone6921/41/45/61

10-3-1-12Cisco IP Phone 7821/41/61

1-4-5-7Cisco Unified IP ConferenceStation 7937G

9-4-2SR1-1Cisco Unified IP Phone7942/62/75

1-4-7-3Cisco Unified Wireless IP Phone792X

10-3-1-16Cisco Unified IP ConferencePhone 8831

10-3-1-20Cisco IP Phone 8811/41/51/61

9-4-2SR1-2Cisco Unified IP Phone8941/8945/8961

9-4-2SR1-2Cisco Unified IP Phone9951/9971

1-2-1-004Cisco ATA 190 AnalogTelephone Adaptor

TC 7.3.4EX60 - Cisco TelePresenceSystem EX60

TC 7.3.4EX90 - Cisco TelePresenceSystem EX90

CE 8.0 Beta 11SX20 - Cisco TelePresence SX20Quick Set

CE 8.0 Beta 11SX80-Cisco TelePresence SX80Codec

CE 8.0 Beta 11SX10-Cisco TelePresence SX10Quick Set

TC 7.3.4C90 - Cisco TelePresence SystemIntegrator Package C90

TX6.1.9.12500-32 – Cisco TelePresenceSystem 500 (32)

TX6.1.9.12TX9000 - Cisco TelePresenceTX9000

CE 8.0 Beta 11MX200-G2- Cisco TelePresenceMX200-G2




MX300-G2- Cisco TelePresenceMX300-G2

CE 8.0 Beta 11

10.2.4(99)Cisco Desktop CollaborationExperience DX650

10.2.4(99)DX70-Cisco DX70

10.2.4(99)DX80-Cisco DX80

15.5.3 MIOSISR Gateways (3945e, 3925e,3945, 2921)

CommunicationsInfrastructure

3.14.0SIOSISR 4451-X

15.5.3 MCiscoUnified Border Element forISR

15.0.2-SE 5Cisco 3750 PoE Switch

ESXi 5.1.0vCenter Server

5.2(2 a)M9500MDS Switch

15.0VersionCisco TelePresenceManagementSuite - TMS

TelePresence

4.5 (1.72)VersionMCU 4510 & 5310 - CiscoTelePresence MCU

MCU_4-3_UI_and_audio_JPN.packageLocale

4.2(4.18)VersionCisco TelePresence Server onVM

XC4.0VersionCisco TelePresence Conductor

4.2(4.18)VersionCisco TelePresence Server 7010

15.3VersionWireless Access Point 1142Wireless andMobility




11.1.0(219067M)Cisco Jabber for MacMessagingApplications

11.1.0 (20345)Cisco Jabber for Windows

11.0.0.213564 - 32 bit (iPhone5 andiPad)

VersionCisco Jabber for iPhone and iPad

11.0.0.213564 - 64 bit (iPhone6)

Apple iOS 8.4.1 (12H321)iPhone5

Apple iOS 8.4.1 (12H321)iPhone6

Apple iOS 8.4.1 (12H321)iPad

11.0.1.218523VersionCisco Jabber for Android

Android OS 5.0.1Galaxy S4

Android OS 4.4.4Xperia Z1

2.1(2a)Cisco UCS6140

Fabric Interconnect PRIMARYUCS


Fabric InterconnectSUBORDINATE


Fabric Cluster

ESXi 5.1.0B-SeriesServer

ESXi Host

ESXi 5.1.0C-SeriesServer

Windows 7-SP1 (Japanese)Windows7-SP1

Operating SystemClient

Windows 8/8.1 (Japanese)Windows8/8.1

10.10.5Mac

IE 10, 11 (Supported Japaneselanguage)

IEBrowser

Firefox 38, Firefox ESR 31, 38(Supported Japanese language)

Mozilla

Chrome 43 or later (Supported Japaneselanguage)

Chrome




Windows Server 2008 (R2 Enterprise- Japanese)

Microsoft Windows ServerServer

Windows Server 2012 (R2 Enterprise- Japanese)

2010Microsoft Exchange Server

2.5.1.28.BCisco WebEx Meetings Server

Open CaveatsTitleDefect ID

Cisco Unified Communications Manager

"060" code is not available in JP Dial PlanCSCuv46080

Cisco Unified IP Phone

In Japanese, the string displayed differently while making a callCSCuw10831

In 6941, Directed call park BLF is working incorrectlyCSCuw21055

In 6941/61, DCP BLF line is not working when it is in connected stateCSCuw20965

Cisco TelePresence Video Communication Server

Self-view disappeared when DX80 camera is acting as document cameraCSCuv75765

Not able to display presentation via VGA port in TX9000CSCuw10516

Japanese System Name is garbled in SX10 Quick Set having EnglishLocale

CSCuv87481

Mute Icon displayed in EX60 OSD when far end endpoint not on muteCSCuv83164

Japanese System Alerting name not displayed in far end endpointCSCuv77445

Video Call Not Established during Continuous Hold and ResumeCSCuv75837

What's New?Test Coverage:

New FeaturesComponents


Test Topology and Environment MatrixOpen Caveats

Security Cert Management EnhancementCisco Unified CommunicationsManager

Re-Enable Multilingual Sort in UCM Admin

Disable https for endpoint services when rollback parameter isenabled

AD Group support for IM/P Roster

Common Criteria requirements for CUCM

Device Load Management

Windows Taskbar shortcutsCisco Jabber for Windows

Chat search

Persistent ChatCisco Jabber for Mac

Search persistent chat room content

DTMF Digital ManagementCisco Jabber for iOS

Click-to-Call URI Handler

Telephony and Chats URIs in Chat Window

Administrative Control for Showing Offline Contacts

Administrative Control for Loading Native Address Book

Far End Camera Control (FECC)Cisco Jabber for Android

Click-to-Call URI Handler

Telephony and Chat URIs in Chat window

Administrative Control for Showing Offline Contacts

Publish Location Information

Opus Codec Support

G.722 Codec Support

User Option for Muting/Stopping Vibration during an Active Call

User Option for Displaying Jabber Availability in the NotificationCenter

System Metrics CollectionCisco TelePresence VideoCommunication Server


Test Topology and Environment MatrixWhat's New?

Removed Export Report to PDF FeatureCisco TelePresence Management Suite

Renamed Statistics Settings Menu

Enabled Early Join for Scheduled Point to Point Calls

Added Option to Choose a Preferred Call Protocol

Added System Support

Updated Settings for Endpoints

Added New Configuration Template

Configurable User Credentials to Add CE Endpoints

Improved Communication Security

Improved Banner Functionality

Multiparty License Mode

Synchronization

Supports Multiparty LicensesCisco TelePresence Conductor

TelePresence Server Encryption key no longer supported

FQDN’s for additional IP addresses for LAN

User interface changes

Centralized Multiparty LicensingCisco TelePresence Server

Encryption Key usage change

VCS RDP Interworking

No Functionality without admin password

CSRF Protection

Reset configuration preserving keys

Remote Monitoring option keyCisco TelePresence TC SoftwareRelease 7.3.3

Support for serviceability UI settings in CUCM - supports SimplifyCisco Prime Collaboration Provisioning

Native Basic Audio Conference

Endpoint Family and Universal Templates

Provisioning Security Requirements

Automatic import and execution of CTO file

Native UCM Emergency Responder Support

Ability to deploy the Paging Server





C H A P T E R 3Test Results Summary

• Cisco Unified Communications Manager, page 21

• Cisco TelePresence Video Communication Server, page 44

• Cisco Jabber for iPhone and iPad, page 80

• Cisco Jabber for Android, page 84

• Cisco Jabber for Windows, page 88

• Cisco Jabber for Mac, page 91

• Cisco TelePresence Management Suite, page 96

• Cisco TelePresence Conductor, page 104

• Cisco TelePresence Server, page 112

• Cisco Prime Collaboration, page 120

• Related Documentation, page 162

Cisco Unified Communications ManagerDefectsStatusCall Component flowDescriptionTitleLogical ID

NilPassedNAVerifywhether theActiveDirectorygroup issyncedsuccessfullywith UnifiedCM

Create agroup inActiveDirectoryand syncwithUnified CM

UCJ11Ph2S.CUCM.G.001


NilPassedNAVerifywhether thealreadyexisted ActiveDirectorygroup isdeleted andsyncedsuccessfullyinUnifiedCM

Deletealreadyexistedgroup inActiveDirectoryand syncwithUnified CM


NilPassedNAVerifywhether amember isadded toActiveDirectorygroup andsynced withUnified CMsuccessfully

Add aMember toa group inActiveDirectoryand syncwithUnified CM


NilPassedNAVerifywhether thechat is startedbetween ADgroupMembers inCisco Jabberfor Androidsuccessfully

Start ChatbetweenAD groupMembers inCJA


NilPassedNAVerifywhether theSelf-signedCertificate foripsecCertificate isdeleted inUnified CM

DeleteSelf-signedCertificatefor ipsecCertificateinCertificateManagement


NilPassedNAVerifywhether theGeneration ofCertificateCSR SigningRequest fortomcat issuccessful inUnified CM

GenerateCertificateCSRSigningRequest fortomcatCertificateinCertificateManagement



Test Results SummaryCisco Unified Communications Manager

NilPassedNAVerifywhether theGeneration ofCertificateCSR SigningRequest forCallManageris successfulinUnifiedCM

GenerateCertificateCSRSigningRequest forCallManagerCertificateinCertificateManagement


NilPassedNAVerifywhether thedownload ofCSRCertificate fortomcat issuccessful inUnified CM

DownloadCSRCertificatefor tomcatCertificateinCertificateManagement


NilPassedNAVerifywhether theupload ofCertificate /CertificateChain fortomcat issuccessful inUnified CM

UploadCertificate /CertificateChain fortomcatCertificateinCertificateManagement


NilPassedNAVerifywhether theUnusedDevice Loadis deletedfrom DeviceLoadManagementinUnifiedCM

Delete anunusedDeviceLoad fromDeviceLoadManagementin UnifiedCM


NilPassedNAVerifywhether thefilter status onDevice Loadis successfulin Device loadManagementinUnifiedCM

Filter Statusin DeviceLoad fromDeviceLoadManagement




NilPassedNAVerifywhether theEnterpriseparameter"preparecluster forrollback topre-8.0" whenset to falsemakes thePhoneservices to useHTTPS astrue

SettingEnterpriseparameter "Preparecluster forrollback topre-8.0" asFALSE


NilPassedNAVerifywhether theEnterpriseparameter"preparecluster forrollback topre-8.0" whenset to truemakes thePhoneservices to useHTTPS asfalse

SettingEnterpriseparameter "Preparecluster forrollback topre-8.0" asTRUE


NilPassedNAVerifying theTomcat -TrustCertificate inUnified CMhas beendeletedsuccessfullyin all thesubscribernodes when itis deletedfrompublisher

Deletion ofTomcat -TrustCertificatein UnifiedCM isreplicated toitssubscribers




NilPassedNAVerifying theCall Manager- TrustCertificate inUnified CMhas beendeletedsuccessfullyin all thesubscribernodes when itis deletedfrompublisher

Deletion ofCallManager -TrustCertificatein UnifiedCM isreplicated toitssubscribers


NilPassedNAVerifying theTomcat -TrustCertificate inCisco UnifiedIM andPresence OSadministrationhas beendeletedsuccessfullyin all thesubscribernodes when itis deletedfrompublisher

Deletion ofTomcat -TrustCertificatein CiscoUnified IMandPresenceOSadministrationis replicatedto itssubscribers


NilPassedNAVerify thatuser is able toUploadCertificate /Certificatechain forPhoneSAST-trustCertificateplaced underCertificateManagementthrough CiscoUnified OSAdministrationpagesuccessfully

UploadCertificate /Certificatechain forPhoneSAST-trustplacedunderCertificateManagement




NilPassedNAVerify thatuser is able toregeneratecertificate forCallManagerplaced underCertificateManagementthrough CiscoUnified OSAdministrationpagesuccessfully

RegenerateCertificateforCallManagerCertificateplacedunderCertificateManagement


NilPassedNAVerify thatuser is able todownloadPEM file forCallManagerplaced underCertificateManagementthrough CiscoUnified OSAdministrationpagesuccessfully

DownloadPEM fileforCallManagerCertificateplacedunderCertificateManagement


NilPassedNAVerify thatuser is able todownloadDER file forCallManagerplaced underCertificateManagementthrough CiscoUnified OSAdministrationpagesuccessfully

DownloadDER fileCertificateforCallManagerCertificateplacedunderCertificateManagement




NilPassedNAVerify thatuser is able toRegenerate forCallManagerpurposeplaced underCertificateManagementthrough CiscoUnified IMand PresenceOSAdministrationpagesuccessfully

RegenerateCertificateforCallManagerCertificateplacedunderCertificateManagement


NilPassedNAVerify theSorting orderdisplayscorrectly forthe End userusing FirstName fieldwhile LocaleSpecificSortingServiceParameter Setas ON

Sortingorder forthe Enduser usingFirst Namefield whenthe LocaleSpecificparameter isON


NilPassedNAVerify theSorting orderdisplayscorrectly forthe End userusing LastName fieldwhile LocaleSpecificSortingServiceParameter Setas ON

Sortingorder forthe Enduser usingLast Namefield whenthe LocaleSpecificparameter isON




NilPassedNAVerify theSorting orderdisplayscorrectly forthe DeviceusingDescriptionfield whileLocaleSpecificSortingServiceParameter Setas ON

Sortingorder forthe DeviceusingDescriptionfield whenthe LocaleSpecificparameter isON


NilPassedNAVerify theSorting orderdisplayscorrectly forthe End userusing FirstName fieldwhile LocaleSpecificSortingServiceParameter Setas OFF

Sortingorder forthe Enduser usingFirst Namefield whenthe LocaleSpecificparameter isOFF


NilPassedNAVerify theSorting orderdisplayscorrectly forthe End userusing LastName fieldwhile LocaleSpecificSortingServiceParameter Setas OFF

Sortingorder forthe Enduser usingLast Namefield whenthe LocaleSpecificparameter isOFF


NilPassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> IP PhoneC

Verifywhether thecall transferfrom CiscoUnified SIPPhoneCP-3905 issuccessful

Call transferfrom CiscoUnified SIPPhoneCP-3905

UCJ11Ph2S.IPPhone.SR.001




Verifywhether thecall transferfrom CiscoUnified SIPPhoneCP-3905 issuccessfulwhen inshared line

Call transferfrom CiscoUnified SIPPhoneCP-3905when inShared Line



Verifywhether theconsultativetransfer fromCisco UnifiedSIP PhoneCP-3905 issuccessful

Consultativetransferfrom CiscoUnified SIPPhoneCP-3905


NilPassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> IP PhoneC -> Unified CM -> IPPhone D

Verifywhether thechain transferfrom CiscoUnified SIPPhoneCP-3905 issuccessful

ChainTransferusing CiscoUnified SIPPhoneCP-3905



Verifywhether thecall transferfrom CiscoUnified SIPPhoneCP-3905, afterjoiningMeet-MeConferencecall issuccessful

Transfercall fromCiscoUnified SIPPhoneCP-3905after joiningMeet-MeConference


NilPassedNAVerifywhether theJapaneselocale isapplied toCisco UnifiedIP Phone 6941after phonerestart

Japanese UIon CiscoUnified IPPhone 6941after phonerestart





Verifywhether thehold andresume ofvideo call issuccessful inCisco UnifiedIP Phoneswhen inshared line

Hold andresume thevideo call inCiscoUnified IPPhoneswhen inshared line


NilPassedIP Phone A -> UnifiedCM -> IP Phone B(Line2)

Verifywhether thehold andresume ofvideo call issuccessful atline2 of CiscoUnified IPPhones formultiple timeswhenconnectedusing Ethernet

Hold andresume thevideo call atline2 ofCiscoUnified IPPhones formultipletimes(ConnectedusingEthernet)



Verifywhether thehold andresume ofvideo call issuccessful inCisco UnifiedIP Phonesafter calltransfer, whenphonesconnectedusing Ethernet

Hold andresume thevideo callafter calltransfer(ConnectedusingEthernet)



Verify blindcall transfer issuccessfulfrom 3905 IPPhone to 7965IP Phone

BlindTransfer thecall from3905 IPPhone to7965 IPPhone





Verify theuser is hearingbusy tone ornot when theytry to cancelthe calltransfer from3905 IPPhones

Hear Busytone whencancel thetransferfrom 3905IP Phone



Verify Cancelthe transferfrom 3905 IPPhone whencall isconnectedwith 7965 IPPhone

Cancel thetransferfrom 3905IP Phonewhen call isconnectedwith 7965IP Phone


NilPassedIP Phone A -> UnifiedCM-1 -> SIP -> UnifiedCM-2 -> IP Phone BIP Phone A -> UnifiedCM-1 -> SIP -> UnifiedCM-2 -> IP Phone C

Verify cancelthe transferfrom 3905 IPPhone whencall isconnectedwith 7965 IPPhone throughSIP Trunk

Cancel thetransferfrom 3905IP Phonewhen call isconnectedwith 7965IP Phonethrough SIPTrunk



Verifytransfer thecall after holdthe call forlong durationfrom 3905 IPPhone

Transfer thecall afterhold the callfor longdurationfrom 3905IP Phone



Verify cancelthe DirectedCall ParkTransfer from3905 IP Phone

Cancel theDirectedCall ParkTransferfrom 3905IP Phone


NilPassedIP Phone A, IP Phone B(Shared Line) ->UnifiedCM -> IP Phone DIP Phone E(Shared Line)-> Unified CM -> IPPhone C

Verify cancelthe transferfrom 3905 IPPhones whenit's in sharedline

Cancel thetransferfrom 3905IP Phonewhen it's inshared line





Verify callhistory in8831 IP Phoneafterconsultativetransfer from78xx IPPhones to8831 IP Phone

View callhistory in8831 IPPhones afterconsultativetransferfrom 78xxIP Phones



Verify missedcall history in8831 IPPhones aftercancelconsultativetransfer from78xx IPPhones

Viewmissed callhistory in8831 IPPhones aftercancelconsultativetransferfrom 78xxIP Phones


NilPassedNAVerifyautomaticregistration of7821 IP Phoneafter networkfailure toUnified CMfor short time

Automaticregistrationof 7821 IPPhone afternetworkfailure toUnified CMfor shorttime


NilPassedIP Phone A -> UnifiedCM -> IP Phone B(Line2)

Verifywhether78XX IPPhone canable to holdand resumethe call in line2 when"Always UsePrime Line"serviceparameter setto Truesuccessfully

Hold andResume thecall in line 2of 78XX IPPhone




NilPassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> IP PhoneC (Line2)

Verifywhether78XX IPPhone canable to holdand resumethe forwarded(Call ForwardNo Answer)call in line 2when "AlwaysUse PrimeLine" serviceparameter setto Truesuccessfully

Hold andResume theforwardedcall in line 2of 78XX IPPhone


NilPassedIP Phone A -> UnifiedCM -> IP Phone C

Verifywhether69XX IPPhone canable to make acall to huntpilot numbersuccessfully

Make a callfrom 69XXIP Phone tohunt pilotnumber


NilPassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> IP PhoneC (Line2)

Verifywhether78XX IPPhone canable to holdand resumethe blindtransferredcall in line 2when AlwaysUse PrimeLine serviceparameter setto Truesuccessfully

Hold andResume theblindtransferredcall in line 2of 78XX IPPhone




NilPassedIP Phone A -> UnifiedCM -> IP Phone C

VerifywhetherAlerting name(Hiragana /Katakana) ofhunt pilotnumber isshowing in69XX IPPhoneCwhileincoming callfrom IP PhoneA successfully

Alertingname(Hiragana /Katakana)of hunt pilotnumberwhileincomingcall from IPPhone


NAPassedIP Phone A -> UnifiedCM 1 -> IP Phone C(78xx) -> Unified CM 1-> SIP Trunk -> UnifiedCM 2 -> IP Phone B

Verify that78xx IP Phonesuccessfullytransfer thecall to IPPhone Bregistered inUnified CM 2via SIP Trunk

CallTransferfrom 78xxIP Phone toIP Phone Bin UnifiedCM 2 viaSIP Trunk


NAPassedIP Phone A -> UnifiedCM -> IP Phone B(78xx)

Verify thatCisco UnifiedIP Phone Amakes call to78xx IP Phoneand 78xx IPPhonesuccessfullyholds the call

Hold a callin 78xx IPPhonewhencall madewithin thecluster




NAPassedIP Phone A -> UnifiedCM -> Hunt pilotnumberIP Phone B -> UnifiedCM -> Hunt pilotnumber -> IP Phone C(78xx)

Verify thatCisco UnifiedIP Phone Amakes call toHunt pilotnumber andline groupMembers notanswering thecall and after30 secondsmake callfrom IP PhoneB to Huntpilot numberand 78xx IPPhone presentin line groupanswers thecall

Create linegroup withthree 78xxIP Phonesand use"TopDown"algorithm inLine group


NAPassedIP Phone B (78xx) ->Unified CM -> IP PhoneA

Verify that78xx IP Phonedisplays thepark numberduring parkedcall when the78xx IP Phoneis in On-hookstate

Display ofParknumber in78xx IPPhone


NAPassedIP Phone A -> UnifiedCM -> IP Phone B -> IPPhone C (69xx)

Verify that IPPhone Btransfer theincoming callfrom IP PhoneA to 69xx IPPhonesuccessfullyand validateDN of IPPhone A andIP Phone Bgets displayedin CallHistory of69xx IP Phone

Display ofIP Phone Aand IPPhone BDN in CallHistory of69xx IPPhoneduring blindtransfer




NilPassedIP Phone A -> UnifiedCM -> IP Phone BIP Phone C -> UnifiedCM -> IP Phone B

Verify lineLED behavioris displayedcorrectly in IPPhone 78XXwhen it hasincoming aswell as holdrevert call

Line LEDbehaviorwhile doingcall holdand revertin IP Phone78XX


NilPassedIP Phone A -> UnifiedCM -> IP Phone B (Line1)IP Phone C-> UnifiedCM -> IP Phone B (Line2) -> Unified CM -> IPPhone D

Verify callpark isworking finein Line2 of IPPhone 7841while makingcall from IPPhone 6941 /6961

Call park inIP Phone7841



Verify calltransfer cancelis workingfine in IPPhone 7841whiletransferringcall from IPPhone 7841 toIP Phone 9971

Call transfercancel in IPPhone 7841



Verifyparticipantsare removingfrom callconference inIP Phone 7861while doingconferencecall from IPPhone 7861 toIP Phone B &IP Phone C

Removeparticipantsfrom callconferencein IP Phone7861




NilPassedIP Phone A -> UnifiedCM -> IP Phone B

Verify callfunction isworking finefor IP Phone99XX whiledoing callfrom IP PhoneA to IP phoneB & IP PhoneCwhich are inshared line

Make callwhen IPPhone99XX is inshared line



Verify Callhold andresume isworking finefor IP Phone99XX whiledoing callfrom IP PhoneA to IP PhoneB & IP PhoneCwhich are inshared line

Hold andResumewhen IPPhone99XX is inshared line



Verify callback isworking finein IP Phone9971when theuser gets busytone

Call Backin IP Phone99xx



Verify lineLED behavioris displayingcorrectly in IPPhone 78XXwhen IPPhonereceives callhold as wellas incomingcall

LEDbehavior inIP Phone78XXwhiledoing callhold andresume





Verify callconferencecancel isworking finefor IP Phone7841 whiledoingconferencecall from IPPhone 7841 toIP Phone B&IP Phone C

Callconferencecancel in IPPhone 7841



Verify toast ornotification isdisplaying onIP Phone78XX whenthe audiobandwidth isset to 64 kbps

Make callfrom IPPhone78XXwhenthe audiobandwidthis set to 64kbps



Verify holdreversion isworked finefor IP Phone99XX whiledoing callfrom IP PhoneA to IP PhoneA to IP PhoneB & IP PhoneCwhich are inshared line

Holdreversion inIP Phone99XXwhenit is inshared line


NilPassedIP Phone A -> UnifiedCM1 -> SIP -> UnifiedCM2 -> IP Phone B

Verify intercluster call isworking finefor IP Phone99XX whiledoing callfrom IP PhoneA to IP PhoneB & IP PhoneC via SIPwhich are inshared line

Hold andresume forinter clustercalls whenIP Phone99XX is inshared line





Verify mutecall isworking finein IP Phone99XX whencall isestablishingbetween IPPhone 9951and IP Phone9971

Mute thecall in IPPhone 99xx



Verify call isestablishedfrom the IPPhone 78XXwhile dialingfrom the callhistory details

Dial fromcall historydetails in IPPhone78XX



Verify call isestablishedfrom the IPPhone 78XXwhile thedialing fromcall historydetails

Dial fromcall historydetails in IPPhone78XX



Verifywhether theLED status issuccessful inCisco IPPhone 88xxduring DCPvia BLF

LED statusof Cisco IPPhone 88xxduring DCPvia BLF



Verifywhether theLED status issuccessful inCisco IPPhone 88xxduring holdand resume inshared line

LED statusof Cisco IPPhone 88xxduring holdand resumein SharedLine




NilPassedIP Phone A -> UnifiedCM -> IP Phone B(Line1)IP Phone B (Line2) ->Unified CM -> IP PhoneC

Verifywhether theLED status issuccessful inCisco IPPhone 88xxwhen calls onboth the linesare put onhold

LED statusof Cisco IPPhone 88xxwhen callson both thelines are puton hold



Verifywhether theLED status issuccessful inCisco IPPhone 88xxduring chainconference

LED statusof Cisco IPPhone 88xxduringchainconference



Verifywhether theLED status issuccessful inCisco IPPhone 88xxduringmeet-meconference

LED statusof Cisco IPPhone 88xxduringmeet-meconference


NilPassedIP Phone B -> UnifiedCM -> IP PhoneA (Line2)

Verify theMissed CallHistory for IPPhone 78XXwhen Line2,Line3 andLine4 of sameIP Phone arein shared line

Missed CallHistory forCisco IPPhone78XXwhenLine2,Line3 andLine4 ofsame IPPhone arein sharedline


NilPassedIP Phone B -> UnifiedCM -> IP Phone A

Verify theMissed CallHistory for IPPhone 78XXin Shared Linewith differentIP Phone

Missed CallHistory forIP Phone78XXwhenin SharedLine




NilPassedIP Phone A -> UnifiedCM -> IP Phone BIP Phone A -> UnifiedCM -> IP Phone C

Verify theCall Historyfor IP Phone78XX issuccessfulafter ConsultTransfer

Call Historyfor IPPhone78XX afterConsultTransfer


NilPassedIP Phone A -> UnifiedCM -> IP Phone BIP Phone A -> UnifiedCM -> IP Phone C

Verify theCall Historyfor IP Phone78XX issuccessful forthe BlindTransfer

Call Historyfor IPPhone78XX forthe BlindTransfer


NilPassedIP Phone A -> UnifiedCM -> IP Phone B (Line1)

Verifywhether theline2 of CiscoIP Phone 78xxgoes toRemote InUse statewhen the lineis shared with,line1 ofanother IPPhone

Remote InUse statewhen theline2 ofCisco IPPhone 78xxis shared


NilPassedIP Phone A -> UnifiedCM -> IP Phone BAnalog Phone C ->Voice Gateway -> IPPhone B

VerifyDistinctiveRing isreflecting for8831 IP Phonefor On net andOff net callssuccessfully

DistinctiveRing for8831 IPPhone forOn net andOff net calls


NilPassedIP Phone B -> UnifiedSRST -> IP Phone A ->Unified SRST -> IPPhone C

Verify theCall ForwardAll in 78XXIP Phone inSRSTMode issuccessful

CallForwardAllin 78XX IPPhone inSRSTMode

UCJ11Ph2S.SRST.G.001

NilPassedIP Phone A -> UnifiedSRST -> IP Phone BIP Phone C -> UnifiedSRST -> IP Phone B

Verify theCall Waitingin 78XX IPPhone duringSRSTMode issuccessful

CallWaiting in78XX IPPhoneduringSRSTMode




NilPassedIP Phone A -> UnifiedSRST -> IP Phone B

Verifywhether theCaller IDdisplaysJapaneseCharacters in78XX IPPhone duringSRST Modesuccessfully

Caller ID in78XX IPPhoneduringSRSTMode


NilPassedIP Phone A -> UnifiedSRST -> IP Phone B ->Unified SRST -> IPPhone C

Verifywhether theConference in78XX IPPhone duringSRSTMode issuccessful

Conferencein 78XX IPPhoneduringSRSTMode


NilPassedIP Phone B -> UnifiedSRST -> IP Phone A

Verify theDND issuccessful in78XX IPPhone duringSRST Mode

DND in78XX IPPhoneduringSRSTMode


NilPassedIP Phone A -> UnifiedSRST -> IP Phone B

Verify theHold andResume in88XX IPPhone duringSRSTMode issuccessful

Hold andResume in88XX IPPhoneduringSRSTMode


NilPassedIP Phone A -> UnifiedSRST -> IP Phone B ->Unified CM -> IP PhoneC

Verify theBlind Transferin 88XX IPPhone duringSRSTMode issuccessful

BlindTransfer in88XX IPPhoneduringSRSTMode


NAPassedNAVerify that78xx IP Phonesuccessfullyregisters inUnified SRSTafter UnifiedCM failover

78xx IPPhoneregistrationin UnifiedSRST

UCJ11Ph2S.SRST.SR.750



NAPassedIP Phone A -> UnifiedSRST -> IP Phone B(78xx) -> IP Phone C

Verify that78xx IP Phoneis able totransfer theincoming callfrom IP PhoneA and swapthe callssuccessfully

Swapduring calltransfer by78xx IPPhoneduringUnified CMfallback

UCJ11Ph2S.SRST.SR.753

CSCuv46080FailedNAVerifywhether "060"code isavailable inJapanese DialPlan

"060" codein JP DialPlan


CSCuw10831FailedIP Phone A -> UnifiedCM -> IP Phone B

Verifywhether thecall is initiatedwith the string-"calling" inJapanese

Display ofJapanesestring whilemaking call

UCJ11Ph2S.IPPhone.G.002

CSCuw21055FailedNAVerifywhether thebehavior ofDirected CallPark BLF issuccessful inCisco UnifiedIP Phone 69xxwhile pressingthe DCP BLFline button

PressDirectedCall ParkBLF linebutton inCiscoUnified IPPhone 69xxafter DCPBLFConfiguration


CSCuw20965FailedIP Phone A -> UnifiedCM -> IP Phone B

Verifywhether theDirected CallPark via BLFis successfulin CiscoUnified IPPhone 69xxwhen it is inactive call

DirectedCall Parkvia BLF inCiscoUnified IPPhone 69xxwhen oncall




Cisco TelePresence Video Communication ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID

NilPassedNAVerify whetherthe SystemMetricsconfigurationsare added underlogging in CiscoTelePresenceVideoCommunicationServer Web UI

Systemmetricsaddedunderlogging inCisco VCS

UCJ11PH2S.VCS.G.001

NilPassedSX80 Codec ->Unified CM-> EX90

Verify whetherthe camera ofCiscoTelePresenceSystem EX90 iscontrolled byCiscoTelePresenceSX80 Codecduring video call,both areregistered withCisco UnifiedCommunicationsManager

ControlCamera ofremoteparticipantin SX80Codec inIntra-clustercall

UCJ11PH2S.VCS.G.002


Test Results SummaryCisco TelePresence Video Communication Server

NilPassedSX80 Codec ->Unified CM-> EX90 -> HoldSX10 Quick Set -> UnifiedCM -> SX80 Codec

Verify whetherthe existing callof CiscoTelePresenceSX80CodecwithCiscoTelePresenceSystem EX90goes on hold andthe new call fromCiscoTelePresenceSX10 Quick Setis answeredwhen'Answer & HoldCurrent' button istapped in CiscoTelePresenceSX80 Codec, allare registeredwith CiscoUnifiedCommunicationsManager

Tap'Answer &HoldCurrent' inSX80Codec fornew callwhenalready in acall

UCJ11PH2S.VCS.G.003

NilPassedSX80 Codec ->Unified CM-> EX90(Call Ended)SX10 Quick Set -> UnifiedCM -> SX80 Codec

Verify whetherthe existing callof CiscoTelePresenceSX80CodecwithCiscoTelePresenceSystem EX90 isdisconnected andthe new call fromCiscoTelePresenceSX10 Quick Setis answeredwhen'Answer & EndCurrent' button istapped in CiscoTelePresenceSX80 Codec, allare registeredwith CiscoUnifiedCommunicationsManager

Tap'Answer &EndCurrent' inSX80Codec fornew callwhenalready in acall

UCJ11PH2S.VCS.G.004



NilPassedSX80 Codec ->Unified CM-> EX90SX10 Quick Set -> UnifiedCM -> SX80 Codec -> Add-> Conference

Verify whetherincoming callfrom CiscoTelePresenceSX10 Quick Setis added with theexisting call ofCiscoTelePresenceSX80 Codec andCiscoTelePresenceSystem EX90when 'Add'button is tappedin CiscoTelePresenceSX80 Codec, allare registeredwith CiscoUnifiedCommunicationsManager

Addincomingcall inSX80CodecregisteredwithUnifiedCMto existingcall

UCJ11PH2S.VCS.G.005

NilPassedSX80 Codec ->Unified CM-> EX90 -> HoldSX80 Codec ->Unified CM-> SX10 Quick Set -> Hold

SX80 Codec ->Unified CM-> EX90 -> Swap

Verify whetherthe call withCiscoTelePresenceSX10 Quick Setand the call withCiscoTelePresenceSystem EX90 isswappedsuccessfully inCiscoTelePresenceSX80 Codec, allare registeredwith CiscoUnifiedCommunicationsManager

Swapbetweentwo calls inSX80CodecregisteredwithUnifiedCM

UCJ11PH2S.VCS.G.006



NilPassedEX90 -> Unified CM ->SX80 Codec

Verify whetherthe call for CiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager isrejected whenDND is enabledusing Touch 10"

Make callto SX80Codec afterenablingDND usingTouch 10"

UCJ11PH2S.VCS.G.007

NilPassedSX10 Quick Set -> UnifiedCM -> SX80 Codec -> Add-> Unified CM -> SX20Quick Set

Verify whetherthe prominentlayout forMultisiteconference inCiscoTelePresenceSX80CodecwithCiscoTelePresenceSX10 Quick Setand CiscoTelePresenceSX20 Quick Setworkssuccessfully , allare registeredwith CiscoUnifiedCommunicationsManager

Prominentlayout inSX80CodecregisteredwithUnifiedCMduringMultisiteconference

UCJ11PH2S.VCS.G.008

NilPassedSX10 Quick Set -> UnifiedCM -> SX80 Codec -> Add-> Unified CM -> SX20Quick SetSX80 Codec -> Drop ->SX10 Quick Set

Verify whetherCiscoTelePresenceSX10 Quick Setis dropped fromCiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager in aMultisiteconference call

Drop aparticipantfrom SX80CodecduringMultisiteconference

UCJ11PH2S.VCS.G.009



NilPassedSX80 Codec -> Cisco VCS-> EX90 -> HoldSX80 Codec -> Cisco VCS-> SX10 Quick Set -> Hold

SX80 Codec -> Cisco VCS-> EX90 -> Swap

Verify whetherthe call withCiscoTelePresenceSX10 Quick Setand the call withCiscoTelePresenceSystem EX90 isswappedsuccessfully inCiscoTelePresenceSX80 Codec, allare registeredwith CiscoTelePresenceVideoCommunicationServer

Swapbetweentwo calls inSX80Codecregisteredwith CiscoVCS

UCJ11PH2S.VCS.G.010

NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> SX80Codec

Verify whetherthe video callfrom CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager can beestablishedsuccessfully

Makingvideo callfromMX200-G2to SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.011



NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> SX20Quick SetMX200-G2 ->Add -> CiscoVCS Expressway -> CiscoVCS -> Unified CM->SX80 Codec-> Conference

Verify whetherthe videoconferenceamong CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge , CiscoTelePresenceSX20 Quick Setand CiscoTelePresenceSX80Codec bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

MakingvideoconferenceamongMX200-G2, SX20Quick Setand SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.012

NilPassedSX20 Quick Set -> UnifiedCM -> Cisco VCS -> CiscoVCS Expressway ->MX200-G2 -> Hold /Transfer -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> SX80Codec

Verify whetherthe consultativecall transfer fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoTelePresenceSX80 Codecregistered withUnified CMworkssuccessfully

Consultativecall transferfromMX200-G2to SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.013



NilPassedMX200-G2 -> Cisco VCSExpressway ->Cisco VCS-> Unified CM -> SX80Codec -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager

PresentationsharingfromMX200-G2to SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.014

NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> SX20Quick SetMX200-G2 ->Add -> CiscoVCS Expressway -> CiscoVCS -> Unified CM ->SX80 Codec(PresentationSharing)

Verify whetherpresentation canbe sharedsuccessfully invideo conferenceamong CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoTelePresenceSX20 Quick Setand CiscoTelePresenceSX80Codec bothregistered withCisco UnifiedCommunicationsManager

SharingPresentationin videoconferenceamongMX200-G2, SX20Quick Setand SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.015



NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> SX80Codec (Hold/Resume)

Verify whetherthe Hold /Resume a videocall from CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager workssuccessfully

Hold /Resume avideo callfromMX200-G2to SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.016

NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> SX20Quick SetMX200-G2 ->Add -> CiscoVCS Expressway -> CiscoVCS -> Unified CM ->SX80Codec (Hold/Resume)

Verify whetherHold / Resume avideo conferenceamong CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoTelePresenceSX20 Quick Setand CiscoTelePresenceSX80Codec bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Hold /Resume avideoconferenceamongMX200-G2, SX20Quick Setand SX80Codec viaCollaborationEdge

UCJ11PH2S.VCS.G.017



NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS->Unified CM -> 500-32 ->Presentation Sharing ->Hold / Resume

Verify whetherHold / Resumeworkssuccessfullywhenpresentation isshared fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager

Hold /ResumewhilepresentationsharingfromMX200-G2to 500-32viaCollaborationEdge

UCJ11PH2S.VCS.G.018

NilPassedSX20 Quick Set -> UnifiedCM -> Cisco VCS -> CiscoVCS Expressway ->MX200-G2 ->Hold/Transfer -> CiscoVCSExpressway -> Cisco VCS-> Unified CM -> DX70

Verify whetherthe consultativecall transfer fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoDX70 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Consultativecall transferfromMX200-G2to DX70viaCollaborationEdge

UCJ11PH2S.VCS.G.019



NilPassedMX200-G2 -> Cisco VCSExpressway ->Cisco VCS-> Unified CM -> DX70 ->Presentation Sharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoDX70 registeredwith CiscoUnifiedCommunicationsManager

PresentationsharingfromMX200-G2to DX70viaCollaborationEdge

UCJ11PH2S.VCS.G.020

NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> DX70 ->Presentation Sharing ->Hold / Resume

Verify whetherHold / Resumeworkssuccessfullywhenpresentation isshared fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoDX70 registeredwith CiscoUnifiedCommunicationsManager

Hold /ResumewhilepresentationsharingfromMX200-G2to DX70viaCollaborationEdge

UCJ11PH2S.VCS.G.021



NilPassedMX200-G2 -> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX20 QuickSet

Verify whetherthe video callfrom CiscoTelePresenceMX200-G2 toCiscoTelePresenceSX20 Quick Setboth registeredwith CiscoUnifiedCommunicationsManager viaCollaborationEdge can beestablishedsuccessfully

Makingvideo callfromMX200-G2to SX20Quick SetbothregisteredviaCollaborationEdge

UCJ11PH2S.VCS.G.022

NilPassedSX10 Quick Set -> UnifiedCM -> Cisco VCS -> CiscoVCS Expressway ->MX200-G2 -> Hold /Transfer-> Cisco VCSExpressway -> Cisco VCS-> Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX20 QuickSet

Verify whethervideo call can betransferredsuccessfully fromCiscoTelePresenceMX200-G2 toCiscoTelePresenceSX20 Quick Setboth registeredwith CiscoUnifiedCommunicationsManager viaCollaborationEdge

ConsultativeCalltransferfromMX200-G2to SX20Quick SetbothregisteredviaCollaborationEdge

UCJ11PH2S.VCS.G.023

NilPassedSX20 Quick Set -> CiscoVCS Expressway -> CiscoVCS -> Unified CM ->Cisco VCS -> Cisco VCSExpressway -> MX200-G2-> Presentation Sharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX20 Quick Setto CiscoTelePresenceMX200-G2 bothregistered withCisco UnifiedCommunicationsManager viaCollaborationEdge

Presentationsharingfrom SX20Quick SettoMX200-G2bothregisteredviaCollaborationEdge

UCJ11PH2S.VCS.G.024



NilPassedSX20 Quick Set -> UnifiedCM -> EX60

Verify"Snapshotsrequire theRemoteMonitoringOption Key"message in thecall control pageof CiscoTelePresenceSystem EX60while in a videocall with CiscoTelePresenceSX20 Quick Setboth registered inCisco UnifiedCommunicationsManager

Checkingfor warningmessagethat says"Snapshotsrequire theRemoteMonitoringOptionKey" inEX60

UCJ11PH2S.VCS.G.025

NilPassedDX70 -> Unified CM ->EX90

Verify"Snapshotsrequire theRemoteMonitoringOption Key"message in thecall control pageof CiscoTelePresenceSystem EX90while in a videocall with CiscoDX70 bothregistered inCisco UnifiedCommunicationsManager

Checkingfor warningmessagethat says"SnapshotsrequireRemoteMonitoringOptionKey" inEX90

UCJ11PH2S.VCS.G.026



NilPassedEX90 -> Unified CM ->SX10 Quick Set

Verify whetherweb snapshotscan be taken fromthe Call Controlpage of CiscoTelePresenceSystem EX90while in a videocall with CiscoTelePresenceSX10 Quick Setboth registered inCisco UnifiedCommunicationsManager afterinstalling RemoteMonitoringOption Key

WebSnapshotsfrom EX90while in acall withSX10Quick Setbothregisteredin UnifiedCM afterinstallingRemoteMonitoringOption Key

UCJ11PH2S.VCS.G.027

NilPassedEX60 -> Cisco VCS ->SX20 Quick Set

Verify whetherweb snapshotscan be taken fromthe Call Controlpage of CiscoTelePresenceSystem EX60while in a videocall with CiscoTelePresenceSX20 Quick Setboth registered inCiscoTelePresenceVideoCommunicationServer afterinstalling RemoteMonitoringOption Key

WebSnapshotsfrom EX60while in acall withSX20Quick Setbothregisteredin CiscoVCS afterinstallingRemoteMonitoringOption Key

UCJ11PH2S.VCS.G.028



NilPassedEX90 (H.323) ->CiscoVCS-> SX20 Quick Set (H.323)

Verify whethervideo callbetween CiscoTelePresenceSystem EX90and CiscoTelePresenceSX20 Quick Setboth registered asH.323 endpointin CiscoTelePresenceVideoCommunicationServer isestablishedsuccessfully

Makingvideo callfrom EX90to SX20Quick Setbothregisteredas H.323endpoint inCisco VCS

UCJ11PH2S.VCS.G.029

NilPassedEX60 -> Unified CM ->SX10 Quick Set

Verify whethervideo callbetween CiscoTelePresenceSystem EX60and CiscoTelePresenceSX10 Quick Setboth registered inCisco UnifiedCommunicationsManager isestablishedsuccessfully

Makingvideo callbetweenEX60 andSX10Quick Setregisteredin UnifiedCM

UCJ11PH2S.VCS.G.030

NilPassedEX90 -> Cisco VCS -> SIPTrunk -> Unified CM ->DX70 -> Hold / Resume

Verify whetherHold/Resume ofa video callbetween CiscoTelePresenceSystem EX90registered inCiscoTelePresenceVideoCommunicationServer and CiscoDX70 registeredin Cisco UnifiedCommunicationsManager workssuccessfully

Hold/Resumevideo callbetweenEX90registeredin CiscoVCS andDX70registeredin UnifiedCM

UCJ11PH2S.VCS.G.031



NilPassedEX90 -> Unified CM ->MX200-G2 -> PresentationSharing (EX90)

Verify whetherpresentationsharing betweenCiscoTelePresenceSystem EX90and CiscoTelePresenceMX200-G2 bothregistered inCisco UnifiedCommunicationsManager workssuccessfully

PresentationSharingbetweenEX90 andMX200-G2bothregisteredin UnifiedCM

UCJ11PH2S.VCS.G.032

NilPassedEX60 -> Cisco VCS ->MX300-G2 -> PresentationSharing (EX60)

Verify whetherpresentationsharing betweenCiscoTelePresenceSystem EX60and CiscoTelePresenceMX300-G2 bothregistered inCiscoTelePresenceVideoCommunicationServer workssuccessfully

PresentationSharingbetweenEX60 andMX300-G2bothregisteredin CiscoVCS

UCJ11PH2S.VCS.G.033

NilPassedEX60 -> Cisco VCS -> SIPTrunk -> Unified CM ->DX70 -> PresentationSharing (EX60)

Verify whetherpresentationsharing betweenCiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationServer and CiscoDX70 registeredin Cisco UnifiedCommunicationsManager workssuccessfully

PresentationSharingbetweenEX60registeredin CiscoVCS andDX70registeredin UnifiedCM

UCJ11PH2S.VCS.G.034



NilPassedEX90 -> Unified CM ->Android Phone (Paired withMX300-G2)

Verify whethervideo call fromCiscoTelePresenceSystem EX90 isanswered inAndroid Phonewhich is pairedwith CiscoTelePresenceMX300-G2through CiscoProximity, bothregistered inCisco UnifiedCommunicationsManager isestablishedsuccessfully

Makingvideo callfrom EX90toMX300-G2which ispaired withAndroidphonethroughCiscoProximitybothregisteredin UnifiedCM

UCJ11PH2S.VCS.G.035

NilPassedEX60 -> Cisco VCS ->Android Phone (Paired withMX200-G2)

Verify whethervideo call fromCiscoTelePresenceSystem EX60 isanswered inAndroid Phonewhich is pairedwith CiscoTelePresenceMX200-G2through CiscoProximity, bothregistered inCisco UnifiedCommunicationsManager isestablishedsuccessfully

Makingvideo callfrom EX60toMX200-G2which ispaired withAndroidphonethroughCiscoProximitybothregisteredin CiscoVCS

UCJ11PH2S.VCS.G.036



NilPassedEX90 -> Unified CM ->MX300-G2 ->Hold/Transfer -> UnifiedCM -> Integrator PackageC90

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager to CiscoTelePresenceSystem IntegratorPackage C90registered withCisco UnifiedCommunicationsManager workssuccessfully.

ConsultativeCallTransferfromMX300-G2registeredwithUnifiedCMtoIntegratorPackageC90registeredwithUnifiedCM

UCJ11PH2S.VCS.G.037

NilPassedEX90 -> Unified CM ->MX200-G2 -> Hold\Transfer -> Unified CM ->Integrator Package C90

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager to CiscoTelePresenceIntegratorPackage C90registered withCisco UnifiedCommunicationsManager workssuccessfully.

ConsultativeCallTransferfromMX200-G2registeredwithUnifiedCMtoIntegratorPackageC90registeredwithUnifiedCM

UCJ11PH2S.VCS.G.038



NilPassedSX10 Quick Set -> UnifiedCM -> MX300-G2

Verify whethervideo call fromCiscoTelePresenceSX10 Quick Setto CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager can beestablishedsuccessfully.

Makingvideo callfrom SX10Quick Setto CiscoTelePresenceMX300-G2registeredwithUnifiedCM

UCJ11PH2S.VCS.G.039

NilPassedSX10 Quick Set -> UnifiedCM -> MX200-G2

Verify whethervideo call fromCiscoTelePresenceSX10 Quick Setto CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager can beestablishedsuccessfully.

Makingvideo callfrom SX10Quick SettoMX200-G2registeredwithUnifiedCM

UCJ11PH2S.VCS.G.040

NilPassedEX90 -> Cisco VCS ->MX300-G2 ->Hold/Transfer -> CiscoVCS> SIP Trunk -> Unified CM-> Integrator Package C90

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceMX300-G2registered withCiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem IntegratorPackage C90registered withCisco UnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfromMX300-G2registeredwith CiscoVCS toIntegratorPackageC90registeredwithUnifiedCM

UCJ11PH2S.VCS.G.041



NilPassedEX90 -> Cisco VCS -> SIPTrunk -> Unified CM ->MX300-G2 ->Hold/Transfer -> UnifiedCM -> SX10 Quick Set

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager to CiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfromMX300-G2to SX10Quick SetregisteredwithUnifiedCM

UCJ11PH2S.VCS.G.042

NilPassedEX90 -> Cisco VCS ->SX80 Codec -> Hold /Transfer -> Cisco VCS >SIP Trunk -> Unified CM-> Integrator Package C90

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceSX80 Codecregistered withCiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem IntegratorPackage C90registered withCisco UnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfrom SX80Codecregisteredwith CiscoVCS toIntegratorPackageC90registeredwithUnifiedCM

UCJ11PH2S.VCS.G.043



NilPassedEX90 -> Cisco VCS ->SX20 Quick Set -> Hold /Transfer -> Cisco VCS ->SIP Trunk -> Unified CM-> Integrator Package C90

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceSX20 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem IntegratorPackage C90registered withCisco UnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfrom SX20Quick Setregisteredwith CiscoVCS toIntegratorPackageC90registeredwithUnifiedCM

UCJ11PH2S.VCS.G.044

NilPassedDX70 (line 2) -> UnifiedCM -> DX80

Verify whetherthe call isestablishedsuccessfullybetween line 2 ofCisco DX70 andCisco DX80 bothare registeredwith CiscoUnifiedCommunicationsManager

Making callfrom line 2of DX70 toDX80

UCJ11PH2S.VCS.G.045

NilPassedSX10 Quick Set -> UnifiedCM -> DX70 (line 2) ->Consultative transfer ->Unified CM -> DX80

Verify whetherthe consultativetransfer from line2 of Cisco DX70which is in callwith CiscoTelePresenceSX10 Quick Setto Cisco DX80workssuccessfully allare registeredwith CiscoUnifiedCommunicationsManager

Consultativetransferfrom line 2of DX70 toDX80

UCJ11PH2S.VCS.G.046



NilPassedSX10 Quick Set -> UnifiedCM -> DX70 (line 2) ->Blind transfer -> UnifiedCM -> DX80

Verify whetherthe blind transferfrom line 2 ofCisco DX70which is in callwith CiscoTelePresenceSX10 Quick Setto Cisco DX80workssuccessfully allare registeredwith CiscoUnifiedCommunicationsManager

Blindtransferfrom line 2of DX70 toDX80

UCJ11PH2S.VCS.G.047

NilPassedSX10 Quick Set -> UnifiedCM -> DX70 (line 2) ->Call Forward All -> UnifiedCM -> DX80

Verify whetherthe Call ForwardAll workssuccessfully forline 2 of CiscoDX70 to CiscoDX80 both areregistered withCisco UnifiedCommunicationsManager

CallForwardAll for line2 of DX70to DX80

UCJ11PH2S.VCS.G.048

NilPassedSX20 Quick Set -> UnifiedCM -> DX70 (line 2)SX10 Quick Set -> UnifiedCM -> DX70 ( line 2) ->Call Forward Busy ->Unified CM -> DX80

Verify whetherthe Call ForwardBusy workssuccessfully forline 2 of CiscoDX70 to CiscoDX80 both areregistered withCisco UnifiedCommunicationsManager

CallForwardBusy forline 2 ofDX70 toDX80

UCJ11PH2S.VCS.G.049



NilPassedSX10 Quick Set -> UnifiedCM -> DX70 (line 2) ->Call Forward No Answer ->Unified CM -> DX80

Verify whetherthe Call ForwardNo Answerworkssuccessfully forline 2 of CiscoDX70 to CiscoDX80 both areregistered withCisco UnifiedCommunicationsManager

CallForwardNoAnswer forline 2 ofDX70 toDX80

UCJ11PH2S.VCS.G.050

NilPassedDX70 (line 2) -> UnifiedCM Cluster 1 -> SIP Trunk-> Unified CM Cluster 2 ->SX10 Quick Set

Verify whetherthe inter-clustercall is establishedsuccessfullybetween line 2 ofCisco DX70registered withCisco UnifiedCommunicationsManager cluster1 and CiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager cluster2

Makinginter-clustercall fromline 2 ofDX70 toSX10Quick Set

UCJ11PH2S.VCS.G.051

NilPassedDX70 (line 2) -> UnifiedCM -> SIP Trunk -> CiscoVCS -> SX10 Quick Set

Verify whetherthe call isestablishedsuccessfullybetween line 2 ofCisco DX70registered withCisco UnifiedCommunicationsManager andCiscoTelePresenceSX10 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer

Making callfrom line 2of DX70 toSX10Quick Setregisteredwith CiscoVCS

UCJ11PH2S.VCS.G.052



NilPassedDX80 -> Unified CM ->DX70 (line2) ->Consultative transfer ->Unified CM -> SIP Trunk-> Cisco VCS -> SX20Quick Set

Verify whetherthe call betweenline 2 of CiscoDX70 and CiscoDX80 bothregistered withCisco UnifiedCommunicationsManager isestablished andconsultativetransfer from line2 of Cisco DX70to SX20 QuickSet registeredwith CiscoTelePresenceVideoCommunicationServer workssuccessfully

Consultativetransferfrom line 2of DX70 toSX20Quick Setregisteredwith CiscoVCS

UCJ11PH2S.VCS.G.053

NilPassedDX80 -> Unified CM ->DX70 ( line 2) -> Blindtransfer -> Unified CM ->SIP Trunk -> Cisco VCS ->SX20 Quick Set

Verify whetherthe call betweenline 2 of CiscoDX70 and CiscoDX80 bothregistered withCisco UnifiedCommunicationsManager isestablished andblind transferfrom line 2 ofCisco DX70 toSX20 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer workssuccessfully

Blindtransferfrom line 2of DX70 toSX20Quick Setregisteredwith CiscoVCS

UCJ11PH2S.VCS.G.054



NilPassedDX80 -> Unified CM ->DX70

Verify whetherthe call is autoanswered inCisco DX70registered withCisco UnifiedCommunicationsManager afterconfiguring Autoanswer inDirectoryNumber page ofCisco DX70 inCisco UnifiedCommunicationsManager

Call autoanswered inDX70

UCJ11PH2S.VCS.G.055

NilPassedNAVerify whetherBluetooth featurein Cisco DX70 isremovedsuccessfullywhen Bluetoothis disabled inphone page ofCisco DX70 inCisco UnifiedCommunicationsManager

RemoveBluetoothfeature forDX70

UCJ11PH2S.VCS.G.056

NilPassedDX70 -> Unified CM ->DX80

Verify whetheraudio call isestablishedbetween CiscoDX70 and CiscoDX80 whenVideo Calling isdisabled forCisco DX70 inCisco UnifiedCommunicationsManager phonepage

DisableVideoCalling forDX70

UCJ11PH2S.VCS.G.057



NilPassedNAVerify whetheran externalmonitor ismirrored withCisco DX70when it isconnected usingHDMI out port ofCisco DX70

Mirrormode inDX70usingHDMI outport

UCJ11PH2S.VCS.G.058

NilPassedSX80 Codec ->Unified CM-> DX80

Verify whetherremote callnotification isdisplayed inCisco DX70when line 2 ofCisco DX70 is ina shared line withCisco DX80which is in a callwith CiscoTelePresenceSX80 Codec allregistered withCisco UnifiedCommunicationsManager

Remote callnotificationin DX70whenshared lineis in call

UCJ11PH2S.VCS.G.059

NilPassedDX70 -> Unified CM ->SX80 Codec

Verify whetherthe call usingSpeed dial inCisco DX70withCiscoTelePresenceSX80 Codec isestablishedsuccessfully bothare registeredwith CiscoUnifiedCommunicationsManager

Call usingSpeed dialin DX70

UCJ11PH2S.VCS.G.060



NilPassedEX90 -> Cisco VCS -> SIPTrunk -> Unified CM ->EX60 -> Blind transfer ->Unified CM -> Cisco DX70

Verify whetherthe blind calltransfer fromCiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager to CiscoDX70 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Blind CallTransferfrom EX60to CiscoDX70registeredwithUnifiedCM

UCJ11PH2S.VCS.G.061

NilPassedEX60 -> Cisco VCS ->EX90 -> Blind transfer ->Cisco VCS -> SIP Trunk ->Unified CM -> DX80

Verify whetherthe blind calltransfer fromCiscoTelePresenceSystem EX90registered withCiscoTelePresenceVideoCommunicationServer to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Blind CallTransferfrom EX90registeredwith CiscoVCS toCiscoDX80registeredwithUnifiedCM

UCJ11PH2S.VCS.G.062



NilPassedEX90 -> Cisco VCS ->EX60 -> Hold / Transfer ->Cisco VCS -> SIP Trunk ->Unified CM -> Cisco DX70

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceSystem EX60registered withCiscoTelePresenceVideoCommunicationServer to CiscoDX70 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfrom EX60registeredwith CiscoVCS toCiscoDX70registeredwithUnifiedCM.

UCJ11PH2S.VCS.G.063

NilPassedEX90 -> Cisco VCS ->EX60 -> Hold / Transfer ->Cisco VCS -> SIP Trunk ->Unified CM -> DX80

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceSystem EX60registered withCiscoTelePresenceVideoCommunicationServer to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfrom EX60registeredwith CiscoVCS toCiscoDX80registeredwithUnifiedCM.

UCJ11PH2S.VCS.G.064

NilPassedEX60 -> Unified CM ->EX90 -> End CallDX70 -> Call Back ->Unified CM -> EX60

Verify whetherthe Call Backworkssuccessfullywhen the callmade from CiscoDX70 to CiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager

Check theCall Backin DX70when callmade toEX60 inBusy state

UCJ11PH2S.VCS.G.065



NilPassedMX300 G2 -> Unified CM-> EX90 -> End CallDX70 -> Call Back ->Unified CM -> MX300-G2

Verify whetherthe Call Backworkssuccessfullywhen the callmade from CiscoDX70 to CiscoMX300-G2registered withCisco UnifiedCommunicationsManager

Check theCall Backin DX70when callmade toMX300-G2in Busystate

UCJ11PH2S.VCS.G.066

NilPassedDX70 -> Unified CM ->EX60DX70 -> Redial -> UnifiedCM -> EX60

Verify whetherthe Redial workssuccessfullywhen the callmade from CiscoDX70 to CiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager

Redial thecall fromDX70 toEX60registeredin UnifiedCM

UCJ11PH2S.VCS.G.067

NilPassedDX80 -> Unified CM ->EX60DX80 -> Redial -> UnifiedCM -> EX60

Verify whetherthe Redial workssuccessfullywhen the callmade from CiscoDX80 to CiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager

Redial thecall fromDX80 toEX60registeredin UnifiedCM

UCJ11PH2S.VCS.G.068



NilPassedEX90 -> Cisco VCS -> SIPTrunk -> Unified CM ->EX60 -> Blind transfer ->Unified CM -> DX80

Verify whetherthe blind calltransfer fromCiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Blind CallTransferfrom EX60registeredwithUnifiedCMto CiscoDX80registeredwithUnifiedCM

UCJ11PH2S.VCS.G.069

NilPassedEX90 -> Cisco VCS ->EX60 -> Blind transfer ->Cisco VCS -> SIP Trunk ->Unified CM -> DX80

Verify whetherthe blind calltransfer fromCiscoTelePresenceEX60 registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Blind CallTransferfrom EX60registeredwith CiscoVCS toCiscoDX80registeredwithUnifiedCM

UCJ11PH2S.VCS.G.070

NilPassedEX60 -> Cisco VCS -> SIPTrunk -> Unified CM ->EX90 -> Blind transfer ->Unified CM -> DX70

Verify whetherthe blind calltransfer fromCiscoTelePresenceSystem EX90registered withCisco UnifiedCommunicationsManager to CiscoDX70 registeredin Cisco UnifiedCommunicationsManager workssuccessfully

Blind CallTransferfrom EX90registeredwithUnifiedCMto CiscoDX70registeredwithUnifiedCM

UCJ11PH2S.VCS.G.071



NilPassedEX60 -> Unified CM ->Cisco DX70 -> CallForward All -> Unified CM-> SX20 Quick Set

Verify whetherthe call can beforwarded fromCisco DX70 toCiscoTelePresenceSX20 Quick Setboth registered inCisco UnifiedCommunicationsManager whencall placed fromCiscoTelePresenceSystem EX60 toCisco DX70

Callforward Allfrom CiscoDX70registeredin UnifiedCM

UCJ11PH2S.VCS.G.072

NilPassedEX60 -> Unified CM ->CiscoDX80-> Call ForwardAll -> Unified CM -> SX20Quick Set

Verify whethercall can beforwarded fromCisco DX80 toCiscoTelePresenceSX20 Quick Setboth registered inCisco UnifiedCommunicationsManager whencall placed fromCiscoTelePresenceSystem EX60 toCisco DX80

Callforward Allfrom CiscoDX80registeredin UnifiedCM

UCJ11PH2S.VCS.G.073



NilPassedEX90 -> Cisco VCS ->Integrator Package C90 ->Hold / Transfer -> CiscoVCS -> SIP Trunk ->Unified CM -> DX80

Verify whetherthe Consultativecall transfer fromCiscoTelePresenceSystem IntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationsServer to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

ConsultativeCallTransferfromIntegratorPackageC90registeredwith CiscoVCS toCiscoDX80registeredwithUnifiedCM.

UCJ11PH2S.VCS.G.074

NilPassedTX9000 -> Unified CMCluster 1 -> SIP Trunk ->Unified CM Cluster 2 ->DX70

Verify whethervideo call fromCiscoTelePresenceTX9000registered withCisco UnifiedCommunicationsManager Cluster1 to Cisco DX70registered withCisco UnifiedCommunicationsManager Cluster2 workssuccessfully

Inter-clustercall fromTX9000 toDX70

UCJ11PH2S.VCS.G.075



NilPassedTX9000 -> Unified CMCluster 1 -> SIP Trunk ->Unified CM Cluster 2 ->DX70 -> Hold / Resume

Verify whetherHold/Resume ina video call fromCiscoTelePresenceTX9000registered withCisco UnifiedCommunicationsManager Cluster1 to Cisco DX70registered withCisco UnifiedCommunicationsManager Cluster2 workssuccessfully

Hold/Resumeinter-clustercall fromTX9000 toDX70

UCJ11PH2S.VCS.G.076

NilPassed500-32 -> Unified CMCluster 1 -> TX9000 -> CallForward All -> Unified CMCluster 1 -> SIP Trunk ->Unified CM Cluster 2 ->SX10 Quick Set

Verify whethercall for CiscoTelePresenceTX9000registered withCisco UnifiedCommunicationsManager Cluster1 is forwarded toCiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager Cluster2

CallForwardAll forTX9000 toSX10Quick Setthrough SIPTrunk

UCJ11PH2S.VCS.G.077



NilPassedSX20 Quick Set -> UnifiedCM Cluster 1 -> TX9000500-32 -> Unified CMCluster 1 -> TX9000 -> CallForward Busy -> UnifiedCM Cluster 1 -> SIP Trunk-> Unified CM Cluster 2 ->SX10 Quick Set

Verify whethercall for CiscoTelePresenceTX9000registered withCisco UnifiedCommunicationsManager Cluster1 is forwarded toCiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager Cluster2 when CiscoTelePresenceTX9000 is busy

CallForwardBusy forTX9000 toSX10Quick Setthrough SIPTrunk

UCJ11PH2S.VCS.G.078

NilPassed500-32 -> Unified CMCluster 1 -> TX9000 -> CallForward No Answer ->Unified CMCluster 1 -> SIPTrunk -> Unified CMCluster 2 -> SX10Quick Set

Verify whethercall for CiscoTelePresenceTX9000registered withCisco UnifiedCommunicationsManager Cluster1 is forwarded toCiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager Cluster2 when there isno answer fromCiscoTelePresenceTX9000

CallForwardNoAnswer forTX9000 toSX10Quick Setthrough SIPTrunk

UCJ11PH2S.VCS.G.079



NilPassedTX9000 -> Unified CM ->DX80 -> Document sharing

Verify whetherdocument isshared to CiscoTelePresenceTX9000 fromCisco DX80using camera asdocument camerawhen both areregistered withCisco UnifiedCommunicationsManager

Documentsharingfrom DX80to TX9000

UCJ11PH2S.VCS.G.080

NilPassed500-32 (Presentationsharing) -> Unified CM ->SX10 Quick Set

Verify whetherpresentationsharing in a videocall from CiscoTelePresenceSystem 500-32 toCiscoTelePresenceSX10 Quick Setworkssuccessfully

Presentationsharingfrom500-32 toSX10Quick Set

UCJ11PH2S.VCS.G.081

NilPassedTX9000 -> Unified CM ->500-32 -> HoldTX9000 -> Unified CM ->SX10 Quick Set

Verify whetherCiscoTelePresenceTX9000 can holdcurrent call withCiscoTelePresence500-32 and makenew call to CiscoTelePresenceSX10 Quick Setsuccessfully, allregistered withCisco UnifiedCommunicationsManager

Holdcurrent calland makenew callfromTX9000

UCJ11PH2S.VCS.G.082



NilPassedTX9000 -> Unified CM ->500-32 -> HoldSX10 Quick Set -> UnifiedCM -> TX9000

Verify whetherthe existing callof CiscoTelePresenceTX9000 withCiscoTelePresenceSystem 500-32goes on hold andthe new call fromCiscoTelePresenceSX10 Quick Setis answeredwhen'Hold andAnswer' button istapped in CiscoTelePresenceTX9000, all areregistered withCisco UnifiedCommunicationsManager

Tap 'HoldandAnswer' inTX9000 fornew callwhenalready in acall

UCJ11PH2S.VCS.G.083

CSCuv75765FailedDX80 -> Unified CM ->MX300-G2 -> Documentsharing

Verify whetherthe self-view ofCisco DX80document camerais present when acall transfer iscancelled andCisco DX80 isback to call withCiscoTelePresenceMX300-G2during documentsharing fromCisco DX80,both registered inCisco UnifiedCommunicationsManager

Checkself-view ofDX80documentcamerawhen calltransfer iscancelled

UCJ11PH2S.VCS.G.085



CSCuw10516FailedNAVerify whetherpresentation isdisplayed inCiscoTelePresenceTX9000 whenpresentationsource isconnected usingVGA port

Displaypresentationin TX9000using VGAport

UCJ11PH2S.VCS.G.086

CSCuv87481FailedNAVerify whetherJapanese SystemAlerting name isdisplayed inCiscoTelePresenceSX10 Quick SetOSD havingEnglish localeregistered inCisco UnifiedCommunicationsManager

CheckingforJapaneseSystemAlertingName inSX10Quick SetOSDhavingEnglishlocale

UCJ11PH2S.VCS.G.088

CSCuv83164FailedEX60 -> Unified CM ->SX10 Quick Set

Verify whetherMute icon is notdisplayed inCiscoTelePresenceSystem EX60when remoteendpoint CiscoTelePresenceSX10 Quick Setis not on mutewhile in a call,both registered inCisco UnifiedCommunicationsManagersuccessfully

Checkingfor MuteIcon inEX60whenSX10Quick Set isnot on mutewhile in acall

UCJ11PH2S.VCS.G.089



CSCuv77445FailedEX60(1) -> Unified CM ->EX60(2)

Verify whetherJapanese SystemAlerting namedisplayed inCiscoTelePresenceSystem EX60(2)while it receivesa call from CiscoTelePresenceSystem EX60(1)both registered inCisco UnifiedCommunicationsManager

CheckingforJapaneseSystemAlertingName inEX60havingEnglishlocale

UCJ11PH2S.VCS.G.090

CSCuv75837FailedSX10 Quick Set -> UnifiedCM -> Cisco VCS -> EX60-> Hold / Resume

Verify whetherVideo Call isestablished inCiscoTelePresenceSX10 Quick Setwhen continuoushold and Resumeis donesimultaneously inboth CiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager andCiscoTelePresenceSystem EX60registered withCiscoTelePresenceVideoCommunicationServer

Video Callin SX10Quick SetduringContinuousHold andResume

UCJ11PH2S.VCS.G.091

Cisco Jabber for iPhone and iPadDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco Jabber for iPhone and iPad

NilPassedNAVerify whethererrornotification isdisplayedsuccessfully inCisco Jabber foriPhone1 whilesending chatmessages toCisco Jabber foriPhone2 whichis in offline

Display oferrornotificationwhile sendingchats toofflinecontacts

UCJ11Ph2S.CJI.G.003

NilPassedNAVerify whetherCisco Jabber foriPhone1displays errormessagesuccessfullywhen it sendsthe group chatinvite to CiscoJabber foriPhone2 whichgoes offline

CJI 1 receiveserrornotificationwhen it sendsgroup chatinvite tooffline contact

UCJ11Ph2S.CJI.G.004

NilPassedCJI 1 -> Unified CM ->CJI 2

Verify whetherthe Cisco Jabberfor iPhone1 isable to copy andpaste the DTMFdigits(0123456789 *# abcd) of CiscoJabber foriPhone2 in itscall windowsuccessfully

Copy andpaste DTMFdigits(0123456789* # abcd) inCJI callwindow

UCJ11Ph2S.CJI.G.022

NilPassedCJI 1 -> Unified CM ->CJI 2

Verify whetherthe Cisco Jabberfor iPhone1 isable to copy andpaste the DTMFdigits (sip: 3227,,, 3228) ofCisco Jabber foriPhone2 into thecall windowsuccessfully

Copy andpaste DTMFdigits (sip:3227 ,,, 3228)in CJI callwindow

UCJ11Ph2S.CJI.G.023



NilPassedCJI 1 ->Unified CM ->CJI 2

Verify whetherthe Cisco Jabberfor iPhone1 isable to copy andpaste the DTMFdigits(0123456789 *# abcd) of CiscoJabber foriPhone2 into thecall windowduring P2P chatsuccessfully

Copy andpaste DTMFdigits(0123456789* # abcd) inCJI callwindowduring P2Pchat

UCJ11Ph2S.CJI.G.024

NilPassedCJI 1 -> VCS-E ->VCS-C ->Unified CM ->VCS-C -> VCS-E -> CJI2

Verify whetherCisco Jabber foriPhone is able tohold and resumethe incomingcall viaCollaborationEdgesuccessfully

Hold andResume thecall in CJI viaCollaborationEdge

UCJ11Ph2S.CJI.G.101

NilPassedNAVerify whetherCisco Jabber foriPhone is able tosend the chatmessages viaCollaborationEdgesuccessfully

Send chatmessagesfrom CJI 1 toCJI 2 viaCollaborationEdge

UCJ11Ph2S.CJI.G.102

NilPassedCJI 1 -> VCS-E ->VCS-C ->Unified CM ->VCS-C -> VCS-E -> CJI2 -> VCS-E ->VCS-C ->Unified CM ->VCS-C ->VCS-E -> CJIPad 1

Verify whetherCisco Jabber foriPhone is able todo conferenceviaCollaborationEdgesuccessfullywith CiscoJabber for iPad

Conference inCJI viaCollaborationEdge

UCJ11Ph2S.CJI.G.103

NilPassedNAVerify whetherCisco Jabber foriPad1 is able toview the offlinecontact of CiscoJabber for iPad2in the contactlist successfully

Showingofflinecontacts in thecontact list

UCJ11Ph2S.CJIPad.G.001



NilPassedCJIPad1 -> Unified CM-> CJIPad2

Verify whetherCisco Jabber foriPad1 is able tomake call toCisco Jabber foriPad2 by usingits URI duringP2P chat withCisco Jabber forWindowssuccessfully

Call fromCJIPad1 toCJIPad2 byusing its URIduring P2Pchat withCJW


NilPassedCJIPad1 -> Unified CM-> CJIPad2

Verify whetherthe Cisco Jabberfor iPad1 is ableto copy andpaste the DTMFdigits(0123456789 *# abcd) of CiscoJabber for iPad2 into the callwindow duringgroup chatsuccessfully

Copy andpaste DTMFdigits(0123456789* # abcd) intothe CJIPadcall windowduring groupchat


NilPassedCJA -> Unified CM ->CJIPad

Verify whetherCisco Jabber foriPad displaysthe missed callnotificationwhen call madefrom CiscoJabber forAndroid andwhen it is inRecents tabsuccessfully

Displayingmissed callnotificationwhen theCJIPad is inRecents Tab


NilPassedCJIPad1 -> VCS-E ->VCS-C ->Unified CM ->VCS-C -> VCS-E ->CJIPad2

Verify whetherthe call isestablished fromCisco Jabber foriPad1 to CiscoJabber for iPad2viaCollaborationEdgesuccessfully

Make call inCJIPad viaCollaborationEdge




NilPassedCJIPad1 -> VCS-E ->VCS-C ->Unified CM ->VCS-C -> VCS-E -> CJI1 -> VCS-E ->VCS-C ->Unified CM ->VCS-C ->VCS-E -> CJIPad2

Verify whetherCisco Jabber foriPad is able topark andretrieve the callviaCollaborationEdgesuccessfully

Call park inCJIPad viaCollaborationEdge


NilPassedCJIPad1 -> VCS-E ->VCS-C ->Unified CM ->VCS-C -> VCS-E ->CJIPad2 -> VCS-E ->VCS-C ->Unified CM ->VCS-C -> VCS-E ->CJI1

Verify whetherCisco Jabber foriPad is able totransfer the callto Cisco Jabberfor iPhone viaCollaborationEdgesuccessfully

Call transferin CJIPad viaCollaborationEdge


Cisco Jabber for AndroidDefectsStatusCall Component FlowDescriptionTitleLogical ID

NilPassedCJW -> Unified CM ->CJA1

Verify whetherCisco Jabber forAndroid 1 is able toview the offlinecontact of CiscoJabber for Android2 in its contact listduring call withCisco Jabber forWindows

CJAdisplaysofflinecontactsduring callwith CJW

UCJ11Ph2S.CJA.G.002

NilPassedNAVerify whetherCisco Jabber forAndroid receivesnotification in thenotification centerduring P2P chatwith Cisco Jabberfor Windows

CJAreceivesIncomingmessagealert in thenotificationcenterduring P2Pchat withCJW

UCJ11Ph2S.CJA.G.011


Test Results SummaryCisco Jabber for Android

NilPassedCJW -> Unified CM ->CJA 1 -> Unified CM ->CJA 2

Verify whetherCisco Jabber forAndroid 2 displaysits availabilitystatus duringconference callwith Cisco Jabberfor Windows andCisco Jabber forAndroid 1

Availabilitystatus in thenotificationcenterduringconferencecall withCJW

UCJ11Ph2S.CJA.G.014

NilPassedCJA 1 -> Unified CM ->CJA 2

Verify whetherCisco Jabber forAndroid 1 displays"On a Call" statusin the notificationcenter during a callwith Cisco Jabberfor Android 2successfully

CJAdisplays"On a Call"status in thenotificationcenter whenon call

UCJ11Ph2S.CJA.G.016

NilPassedNAVerify whetherCisco Jabber forAndroid notifiesabout the phoneservicedisconnection inthe notificationcenter successfully

Enable theoption"Notify Mewhendisconnected"in PhoneServices

UCJ11Ph2S.CJA.G.017

NilPassedNAVerify whetherCisco Jabber forAndroid is able todisplaymobile iconduring P2P chatwith Cisco Jabberfor Windows

Enable theoption"Show IconWhenMobile"during P2Pchat withCJW

UCJ11Ph2S.CJA.G.025

NilPassedNAVerify whetherCisco Jabber forAndroid is able todisplaymobile iconduring group chatwith Cisco Jabberfor Windows andCisco Jabber foriPad successfully

Enable"Show IconWhenMobile"optionduringgroup chat

UCJ11Ph2S.CJA.G.028



NilPassedCJA 1 -> Unified CM ->CJA 2 -> Unified CM ->CJA 3

Verify whetherCisco Jabber forAndroid is able toenable vibratemode duringconference callsuccessfully

Enablevibratemode duringconferencecall

UCJ11Ph2S.CJA.G.031

NilPassedCJA -> Unified CM ->CJW

Verify whetherCisco Jabber forAndroid displaysOPUS codec in callstatistics during callwith Cisco Jabberfor Windowssuccessfully

CJAdisplaysOPUScodec in callstatisticsduring callwith CJW

UCJ11Ph2S.CJA.G.035

NilPassedCJA -> Unified CM -> IPPhone A (88xx)

Verify whether thecodec G.722 isdisplaying in CiscoJabber for Androidcall statistics pagewhen call isestablished betweenCisco Jabber forAndroid and CiscoIP Phone 88xx

Display ofG.722 codecin CJAduring callwith CiscoIP Phone88xx

UCJ11Ph2S.CJA.G.038


Verify whetherCisco Jabber forAndroid 1 is able tocall Cisco Jabberfor Android 2 by itstelephony URIduring P2P chatwith Cisco Jabberfor Android 3successfully

CJA 1makes callto CJA 2 byitstelephonyURI duringP2P chatwith CJA 3

UCJ11Ph2S.CJA.G.046


Verify whether theCisco Jabber forAndroid 1 is able tochat with CiscoJabber forWindows by usingchat URI during acall with CiscoJabber for Android2 successfully

CJA 1 startschat withCJW usingchat URIduring a callwith CJA 2

UCJ11Ph2S.CJA.G.080



NilPassedCJA 1 -> VCS-E ->VCS-C -> Unified CM ->VCS-C -> VCS-E -> CJA2

Verify whether theCisco Jabber forAndroid can able tohold and resumethe call made viaCollaboration Edgesuccessfully

Hold andResume thecall in CJA,when callmade viaCollaborationEdge

UCJ11Ph2S.CJA.G.101

NilPassedNAVerify whetherCisco Jabber forAndroid can able tosend the chatmessages viaCollaboration Edgesuccessfully

Send chatmessagesfrom CJA1to CJA2 andvice-versaviaCollaborationEdge

UCJ11Ph2S.CJA.G.102

NilPassedCJA 1 -> VCS-E ->VCS-C -> Unified CM ->VCS-C -> VCS-E -> CJA2-> VCS-E -> VCS-C ->Unified CM -> VCS-C ->VCS-E -> CJW 1

Verify whetherCisco Jabber forAndroid can able tojoin conference viaCollaboration Edgesuccessfully withCisco Jabber forWindows

Conferencecall in CJAviaCollaborationEdge

UCJ11Ph2S.CJA.G.103

NilPassedCJA 1 -> VCS-E ->VCS-C -> Unified CM ->VCS-C -> VCS-E -> CJA2

Verify whether thecall is establishedfrom Cisco Jabberfor Android 1 toCisco Jabber forAndroid 2 viaCollaboration Edgewhen Cisco Jabberfor Android 2 is inshared line withCisco Jabber forWindows

Make callviaCollaborationEdge whileCJA isplaced inshared linewith CJW

UCJ11Ph2S.CJA.G.104

NilPassedCJA 1 -> VCS-E ->VCS-C -> Unified CM ->VCS-C -> VCS-E -> CJA2-> VCS-E -> VCS-C ->Unified CM -> VCS-C ->VCS-E -> CJW 1

Verify whetherCisco Jabber forAndroid can able totransfer the call toCisco Jabber forWindows viaCollaboration Edgesuccessfully

Call transferin CJA viaCollaborationEdge

UCJ11Ph2S.CJA.G.106



Cisco Jabber for WindowsDefectsStatusCall Component FlowDescriptionTitleLogical ID

NilPassedNAVerify whetherCisco Jabber forWindows is ableto login viaCollaborationEdge usingActive Directoryuser successfully

Login toCJW usingActiveDirectoryuser viaCollaborationEdge

UCJ11Ph2S.CJW.G.801

NilPassedCJW1 ->VCS-E->VCS-C->UnifiedCM ->VCS-C->VCS-E -> CJW 2 ->VCS-E-> VCS-C ->Unified CM -> VCS-C ->VCS-E -> CJW 3

Verify whethercall made fromCisco Jabber forWindows 1 toCisco Jabber forWindows 2 isforwarded toCisco Jabber forWindows 3 viaCollaborationEdge when theCall Forward Allis enabled onUnified CMsuccessfully

Forward thecall to CJWwhenForwardAllis enabledon UnifiedCM

UCJ11Ph2S.CJW.G.802

NilPassedCJW 1 -> VCS-E ->VCS-C -> Unified CM ->VCS-C -> VCS-E -> CJW2

Verify whetherCisco Jabber forWindows 1 isable to make acall to CiscoJabber forWindows 2 viaCollaborationEdge when loginusing ActiveDirectory usersuccessfully

Make abasic callfromCJW1to CJW 2viaCollaborationEdge

UCJ11Ph2S.CJW.G.803


Test Results SummaryCisco Jabber for Windows

NilPassedCJW 1 -> VCS-E ->VCS-C -> Unified CM ->VCS-C -> VCS-E -> CJW2

Verify whetherCisco Jabber forWindows 2 isable to hold andresume theincoming callfrom CiscoJabber forWindows 1 viaCollaborationEdge whenlogged in usingActive Directoryuser successfully

Hold andResume theIncomingcall whichis madefrom CJWviaCollaborationEdge

UCJ11Ph2S.CJW.G.804

NilPassedNAVerify persistentchat roomcontents aredisplayedsuccessfully inCisco Jabber forWindows

SearchPersistentchat roomcontents inCJW

UCJ11Ph2S.CJW.G.126

NilPassedNAVerify whetherthe user is able toenter into thechat room bysearchingpersistent chatroom contents inCisco Jabber forWindows

Enter intochat roombysearchingpersistentchat roomcontents inCJW

UCJ11Ph2S.CJW.G.128

NilPassedNAVerify doublebyte charactersare displayed inchat roomconversationwindow whilesearching inCisco Jabber forWindows

Searchdouble bytecharactersin CJW chatroomconversationwindow

UCJ11Ph2S.CJW.G.129



NilPassedNAVerify hiraganaand katakanacharacters aredisplayed in chatroomconversationwindow whilesearching inCisco Jabber forWindows

Searchhiraganaandkatakanacharactersin CJW chatroomconversationwindow

UCJ11Ph2S.CJW.G.131

NilPassedNAVerify "NoResults found"notification isdisplayed inCisco Jabber forWindows searchwindow whilesearchingcontents whichare not used inchat roomconversation

Search thecontentwhich is notused in chatroomconversationin CJW

UCJ11Ph2S.CJW.G.132

NilPassedNAVerify that chatroom has beencreated and ableto search the userusing the user IDin chat roomsuccessfully

Create achat roomand searchusing theoptionpresent inchat roomwindow

UCJ11Ph2S.CJW.G.001

NilPassedNAVerify that CiscoJabber forWindows able to"Exit" using theoption present inwindows taskbar

Exit Jabberusing theoptionpresent inwindowstaskbar

UCJ11Ph2S.CJW.G.006

NilPassedNAVerify that CiscoJabber forWindowspresence status ischanged to"Available"successfullyusing option inwindowsshortcuts

Change theuser statusto"Available"fromwindowstaskbar

UCJ11Ph2S.CJW.G.008



Cisco Jabber for MacDefectsStatusCall Component FlowDescriptionTitleLogical ID

NilPassedNAVerify the hubmenu "ChatRooms" forpersistent chat isdisplaying onCisco Jabber forMac

Display of"ChatRooms"hub menuin CJM

UCJ11Ph2S.CJM.G.001

NilPassedNAVerify CiscoJabber for Macuser has joinedinto the chatroom byaccepting thechat roomnotificationwhich is sentfrom CiscoJabber forWindows

Join intochat roomas amember inCJM

UCJ11Ph2S.CJM.G.002

NilPassedNAVerify chat roomlist is displayingin Cisco Jabberfor Mac byclicking the chatrooms hub menu

Display ofchat roomlist in CJM

UCJ11Ph2S.CJM.G.003

NilPassedNAVerify chatconversations arehappeningsuccessfully inCisco Jabber forMac to membersin the chat room

Chat withmembers inthe chatroom inCJM

UCJ11Ph2S.CJM.G.005

NilPassedNAVerify screencaptures are sentsuccessfullyfrom CiscoJabber for Macto members inthe chat roomduring chatconversation

Sendscreencapturesfrom CJMtomembersavailable inchat room

UCJ11Ph2S.CJM.G.007


Test Results SummaryCisco Jabber for Mac

NilPassedNAVerify perviouschat historydetails aredisplayed in chatroomconversationwindow in CiscoJabber for Mac

Viewpreviouschat historydetails inthe CJMchat room

UCJ11Ph2S.CJM.G.008

NilPassedNAVerify whetherCisco Jabber forMac user issuccessfullyjoined into thepasswordprotected chatroom of CiscoJabber forWindows

Join intothepasswordprotectedchat roomin CJM

UCJ11Ph2S.CJM.G.010

NilPassedNAVerify chatrooms areremovedsuccessfullyfrom CiscoJabber for Macby removingchat rooms from"Chat Rooms"hub menu

Removechat roomsfrom CJM

UCJ11Ph2S.CJM.G.011

NilPassedNAVerify chatrooms are addedsuccessfully inCisco Jabber forMac which iscreated usingdouble bytecharacters inCisco Jabber forWindows

Add chatroomswhich iscreatedwithdouble bytecharacters

UCJ11Ph2S.CJM.G.013

NilPassedNAVerify blockedimages are nottransferredduring chat roomconversation inCisco Jabber forMac

Blockimagesduring chatconversationinpersistentchat

UCJ11Ph2S.CJM.G.023



NilPassedNAVerify whetherthe persistentchat roomcontentssearched aredisplayedsuccessfully inCisco Jabber forMac

Searchpersistentchat roomcontents inCJM

UCJ11Ph2S.CJM.G.026

NilPassedNAVerify user isable to enter intothe chat room bysearchingpersistent chatroom contents inCisco Jabber forMac

Enter intochat roombysearchingpersistentchat roomcontents inCJM

UCJ11Ph2S.CJM.G.028

NilPassedNAVerify chat roomparticipants aredisplayingsuccessfully onthe right side ofthe chat roomconversationwindow in CiscoJabber for Mac

Viewparticipantslist in CJMchat room

UCJ11Ph2S.CJM.G.009

NilPassedNAVerify emoticonsare sentsuccessfullyduring chatconversationsfrom CiscoJabber for Macto membersavailable in chatroom

Sendemoticonsfrom CJMtomembersin the chatroom

UCJ11Ph2S.CJM.G.012

NilPassedNAVerify presencestatus aredisplayed forchat roommembers inCisco Jabber forMac

Chat roommemberspresencestatus inCJM

UCJ11Ph2S.CJM.G.018



NilPassedNAVerify chat roomname which isrenamed inCiscoJabber forWindows hasbeen updated inCisco Jabber forMac successfully

Edit Chatroom nameinpersistentchat

UCJ11Ph2S.CJM.G.019

NilPassedNAVerify errornotification isdisplayed inCisco Jabber forMac whilesharing desktopfrom CiscoJabber forWindows toCisco Jabber forMac during chatroomconversation

Desktopsharingfrom CJWto CJMduring chatroomconversation

UCJ11Ph2S.CJM.G.024

NilPassedNAVerify whetherthe double bytecharacterssearched aredisplayed inCisco Jabber forMac chat roomconversationwindowsuccessfully

Searchdouble bytecharactersin CJMchat roomconversation

UCJ11Ph2S.CJM.G.029

NilPassedNAVerify chat roomnames aredisplayed whilesearchingcontents in CiscoJabber for Macby using the tab"Search chatroom messages"

Display ofchat roomnamewhilesearchingchat roomcontents inCJM

UCJ11Ph2S.CJM.G.033



NilPassedNAVerify "NoResults found"notification isdisplayed inCisco Jabber forMac searchwindow whilesearchingcontents whichare not used inchat roomconversation

Search thecontentwhich isnot used inCJM chatroomconversation

UCJ11Ph2S.CJM.G.032

NilPassedCJW ->VCS-E->VCS-C->Unified CM ->VCS-C-> VCS-E -> CJM 1 ->VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E -> CJM 2

Verify whethercall made fromCisco Jabber forWindows toCisco Jabber forMac 1 getsforwarded toCisco Jabber forMac 2 viaCollaborationEdge when theCall Forward Allis enabled inUnified CMsuccessfully

Forwardthe call toCJM whenForwardAll isenabled inUnifiedCM

UCJ11Ph2S.CJM.G.310

NilPassedNAVerify whetherCisco Jabber forMac is able tologin viaCollaborationEdge usingActive Directoryuser successfully

Login tothe CJMusingActiveDirectoryuser viaCollaborationEdge

UCJ11Ph2S.CJM.G.301

NilPassedNAVerify whetherLast Name FirstName is showingin Cisco Jabberfor Mac afterlogin to CiscoJabber for Macvia CollaborationEdge using theActive Directoryuser successfully

Last NameFirst Nameof CJMafter loginusingActiveDirectoryuser

UCJ11Ph2S.CJM.G.330



NilPassedCJM 1 ->VCS-E->VCS-C ->Unified CM ->VCS-C->VCS-E -> CJM2

Verify whetherCisco Jabber forMac 1 is able tomake a call toCisco Jabber forMac 2 viaCollaborationEdge whenlogged in usingActive Directoryuser successfully

Make abasic callfrom CJM1 to CJM 2viaCollaborationEdge

UCJ11Ph2S.CJM.G.303

NilPassedCJM 1 ->VCS-E->VCS-C ->Unified CM ->VCS-C->VCS-E -> CJM2

Verify whetherCisco Jabber forMac 2 is able tohold and resumethe incoming callfrom CiscoJabber for Mac 1via CollaborationEdge whenlogged in usingActive Directoryuser successfully

Hold andResume theIncomingcall whichis madefrom CJMviaCollaborationEdge

UCJ11Ph2S.CJM.G.304

NilPassedCJW -> VCS-E ->VCS-C ->Unified CM ->VCS-C ->VCS-E ->CJM1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E -> CJM 2

Verify whethercall made fromCisco Jabber forWindows toCisco Jabber forMac 1 getsforwarded toCisco Jabber forMac 2 viaCollaborationEdge when CallForward NoAnswer isenabled inUnified CMsuccessfully

Forwardthe call toCJM whenCallForwardNoAnsweris enabledin UnifiedCM

UCJ11Ph2S.CJM.G.312

Cisco TelePresence Management SuiteDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco TelePresence Management Suite

NilPassedNAVerify whetherexporting CallDetail Record inPDF is removedfrom CiscoTelePresenceManagement Suite

Export in PDFremoved forCall DetailRecords inCisco TMS

UCJ11PH2S.TMS.G.001

NilPassedNAVerify whetherexporting CallDetail Record inExcel is workingsuccessfully inCiscoTelePresenceManagement Suite

Export CallDetailRecords inExcel in CiscoTMS

UCJ11PH2S.TMS.G.002

NilPassedNAVerify whetherStatistics SettingsunderAdministrativeTools is renamedto ReportingSettings in CiscoTelePresenceManagement Suite

StatisticsSettingsrenamed toReportingSettings CiscoTMS

UCJ11PH2S.TMS.G.003

NilPassedCisco TMS -> MX300-G2-> Unified CM ->MX200-G2

Verify whetherEarly Join forPoint to Pointscheduled callinvolving CiscoTelePresenceMX300-G2 andCiscoTelePresenceMX200-G2 bothregistered to CiscoUnifiedCommunicationsManager workssuccessfully inCiscoTelePresenceManagement Suite

Early Join forPoint to Pointcalls toendpointsregistered toUnified CM

UCJ11PH2S.TMS.G.004



NilPassedCisco TMS -> MX300-G2-> Cisco VCS ->MX200-G2

Verify whetherEarly Join forPoint to Pointscheduled callinvolving CiscoTelePresenceMX300-G2 andCiscoTelePresenceMX200-G2 bothregistered to CiscoTelePresenceVideoCommunicationServer workssuccessfully inCiscoTelePresenceManagement Suite

Early Join forPoint to Pointcalls toendpointsregistered toCisco VCS

UCJ11PH2S.TMS.G.005

NilPassedCisco TMS -> MX300-G2-> Cisco VCS ->MX200-G2 -> Audio Call

Verify whetherEarly Join forPoint to Pointscheduled call withbandwidth set toaudio involvingCiscoTelePresenceMX300-G2 andCiscoTelePresenceMX200-G2 bothregistered to CiscoTelePresenceVideoCommunicationServer workssuccessfully inCiscoTelePresenceManagement Suite

Early Join forPoint to Pointcalls withbandwidth setto audio toendpointsregistered toCisco VCS

UCJ11PH2S.TMS.G.006

NilPassedNAVerify whetherH323 can be set asthe preferred callprotocol forrouting forconferencing inCiscoTelePresenceManagement Suite

Set H323 aspreferred callprotocol forrouting inCisco TMS

UCJ11PH2S.TMS.G.007



NilPassedNAVerify whetherSIP can be set asthe preferred callprotocol forrouting forconferencing inCiscoTelePresenceManagement Suite

Set SIP aspreferred callprotocol forrouting inCisco TMS

UCJ11PH2S.TMS.G.008

NilPassedNAVerify whetherCiscoTelePresenceMX300-G2 havingCE8.0 softwarecan be added andsupported in CiscoTelePresenceManagement Suite

Support forMX300-G2having CE8.0in Cisco TMS

UCJ11PH2S.TMS.G.009

NilPassedNAVerify whetherCiscoTelePresenceSX20 Quick Sethaving CE8.0software can beadded andsupported in CiscoTelePresenceManagement Suite

Support forSX20 QuickSet havingCE8.0 inCisco TMS

UCJ11PH2S.TMS.G.010

NilPassedNAVerify whetherCisco Proximityfor CiscoTelePresenceMX300-G2 can beturned off in CiscoTelePresenceManagement Suite

Turn OffCiscoProximity forMX300-G2 inCisco TMS

UCJ11PH2S.TMS.G.011

NilPassedNAVerify whetherCall Control ofCisco Proximityfor CiscoTelePresenceMX300-G2 can bedisabled in CiscoTelePresenceManagement Suite

Disable CallControl ofCiscoProximity forMX300-G2 inCisco TMS

UCJ11PH2S.TMS.G.012



NilPassedNAVerify whethernon-defaultcredentials can beusedwhile probingand adding CiscoTelePresenceMX300-G2 inCiscoTelePresenceManagement Suite

Non-defaultcredentials forMX300-G2while addingin Cisco TMS

UCJ11PH2S.TMS.G.013

NilPassedNAVerify whetheradmin password ofCiscoTelePresenceMX300-G2 can bechanged in CiscoTelePresenceManagement Suite

ChangeAdminPassword ofMX300-G2 inCisco TMS

UCJ11PH2S.TMS.G.014

NilPassedNAVerify whetherCommunicationSecurity can be setto medium underthe Cisco TMStools in CiscoTelePresenceManagement Suite

SetCommunicationSecurity tomedium inCisco TMS

UCJ11PH2S.TMS.G.015

NilPassedNAVerify whetherCiscoTelePresenceSystem 500-32loses some or allof the functionalityin CiscoTelePresenceManagement Suiteafter setting theCommunicationSecurity to High

Loss offunctionalityof 500-32 inCisco TMSafter settingcommunicationsecurity toHigh

UCJ11PH2S.TMS.G.016

NilPassedNAVerify whethernew top andbottom banner canbe added forE-mail, documentsunder TMS toolsin CiscoTelePresenceManagement Suite

Edit Topbanner andbottom bannerfor E-mail,documents inCisco TMS

UCJ11PH2S.TMS.G.017



NilPassedNAVerify whether themultiparty licensemode of CiscoTelePresenceConductor roomcan be changed inCiscoTelePresenceManagement SuiteProvisioningExtension

ChangeMultipartylicense modeof Conductorroom in CiscoTMSPE

UCJ11PH2S.TMS.G.018

NilPassedNAVerify whether themultiparty licenseusage can besynchronized fromCiscoTelePresenceConductor toCiscoTelePresenceManagement SuiteProvisioningExtension usingthe synchronizeicon

Synchronizemultipartylicense usagefromConductor toCisco TMSPE

UCJ11PH2S.TMS.G.019

NilPassedNAVerify whether thesystem upgrade toCE8.0 software forCiscoTelePresenceMX300-G2 havingJapanese systemname anddescription workssuccessfully inCiscoTelePresenceManagement Suite

Systemupgrade ofMX300-G2 toCE8.0 havingJapaneseSystem Nameanddescription

UCJ11PH2S.TMS.G.020



NilPassedCisco TMS -> SX80Codec-> Cisco VCS -> SX10Quick Set

Verify whetherPoint to Pointscheduled callusing AutomaticConnect involvingCiscoTelePresenceSX80 Codec andCiscoTelePresenceSX10 Quick Setboth registered toCiscoTelePresenceVideoCommunicationServer workssuccessfully inCiscoTelePresenceManagement Suite

Point to Pointcalls usingAutomaticConnect toendpointsregistered toCisco VCS

UCJ11PH2S.TMS.G.021

NilPassedCisco TMS -> SX80Codec-> Cisco VCS -> SX10Quick Set

Verify whetherPoint to Pointscheduled callusing One Buttonto Push involvingCiscoTelePresenceSX80 Codec andCiscoTelePresenceSX10 Quick Setboth registered toCiscoTelePresenceVideoCommunicationServer workssuccessfully inCiscoTelePresenceManagement Suite

Point to Pointcalls usingOne Button toPush toendpointsregistered toCisco VCS

UCJ11PH2S.TMS.G.022



NilPassedNAVerify whetherbackup can betaken for CiscoTelePresenceMX300-G2 havingJapanese systemname in CiscoTelePresenceManagement Suite

Backup forMX300-G2havingJapanesename usingCisco TMS

UCJ11PH2S.TMS.G.023

NilPassedNAVerify whetherrestore can be donefor CiscoTelePresenceMX300-G2 havingJapanese systemname in CiscoTelePresenceManagement Suite

Restore forMX300-G2havingJapanesename usingCisco TMS

UCJ11PH2S.TMS.G.024

NilPassedNAVerify whetherbackup can betaken for CiscoTelePresenceVideoCommunicationServer havingJapanese systemname in CiscoTelePresenceManagement Suite

Backup forCisco VCShavingJapanesename usingCisco TMS

UCJ11PH2S.TMS.G.025

NilPassedNAVerify whetherrestore can be donefor CiscoTelePresenceVideoCommunicationServer havingJapanese systemname in CiscoTelePresenceManagement Suite

Restore forCisco VCShavingJapanesename usingCisco TMS

UCJ11PH2S.TMS.G.026



NilPassedCisco TMS -> MX300-G2-> Cisco VCS -> SX80Codec

Verify whether Adhoc booking forCiscoTelePresenceMX300-G2 andCiscoTelePresenceSX80 Codecregistered in CiscoTelePresenceVideoCommunicationServer and havingJapanese Systemname workssuccessfully inCiscoTelePresenceManagement Suite

Ad hocBooking forendpointshavingJapaneseSystem Name

UCJ11PH2S.TMS.G.027

NilPassedNAVerify whetherconfigurationtemplate of CE8.0can be added toCiscoTelePresenceManagement Suite

AddConfigurationtemplate ofCE8.0 toCisco TMS

UCJ11PH2S.TMS.G.028

Cisco TelePresence ConductorDefectsStatusCallComponent FlowDescriptionTitleLogical ID

NilPassedNAVerify whether noalarms are raisedin CiscoTelePresenceConductor whenEncryption key isnot present onCiscoTelePresenceServer in VM

NoAlarm raisedin ConductorwhenEncryption keyis not present inTelePresenceServer on VM

UCJ11PH2S.TC.G.001


Test Results SummaryCisco TelePresence Conductor

NilPassedNAVerify whether noalarms are raisedin CiscoTelePresenceConductor whenthe Encryption keyis not present inCiscoTelePresenceServer 7010

No AlarmRaised inConductorwhenEncryption keyis not present inCisco TS 7010

UCJ11PH2S.TC.G.002

NilPassedNAVerify whether anew fieldMultipartyLicensing forTelePresenceServers isavailable underMaintenance ->Option keys inCiscoTelePresenceConductor

Checking Newfield MultipartyLicensing forTelePresenceServers inConductor

UCJ11PH2S.TC.G.003

NilPassedNAVerify whethernew pageMultiparty LicenseStatus is availableunder Status ->MultipartyLicenses in CiscoTelePresenceConductor

Checking thenew page"MultipartyLicense Status"in Conductor

UCJ11PH2S.TC.G.004

NilPassedNAVerify whethernew field FQDN isadded underAdditionalAddresses forLAN 1 underSystem ->Network Interfaces-> IP in CiscoTelePresenceConductor

Checking newfield FQDN inthe AdditionalAddresses forLAN 1 inConductor

UCJ11PH2S.TC.G.005



NilPassedNAVerify whetherconductor FQDNcan be added inthe NetworkInterface underSystem in CiscoTelePresenceConductor UserInterface

Adding FQDNof conductor inthe NetworkInterface pageunder System inConductor

UCJ11PH2S.TC.G.006

NilPassedNAVerify whether analarm is raisedwhen the numberof SharedMultiparty licenseowners exceedsthe number ofinstalled SharedMultiparty licenses

Alarm raisedwhen thenumber of SMPlicense ownersexceeds thenumber ofinstalled SMPlicenses

UCJ11PH2S.TC.G.008

NilPassedMX300-G2 ->UnifiedCM -> SIP Trunk ->Conductor -> MCU5310 -> MeetingConference

Verify whether nolicense isconsumed whenCiscoTelePresenceMX300-G2 joins aMeetingconferencemanaged by CiscoTelePresenceMCU 5310 inCiscoTelePresenceConductorsuccessfully

No licenseconsumed inConductorwhenjoining aMeetingconference fromMX300-G2managed byMCU 5310

UCJ11PH2S.TC.G.009



NilPassedEX90 -> Unified CM-> SIP Trunk ->Conductor -> MCU4510 -> MeetingConference

Verify whether nolicense isconsumed whenCiscoTelePresenceSystem EX90registered in CiscoUnifiedCommunicationsManager joins aMeetingconferencemanaged by CiscoTelePresenceMCU 4510 inCiscoTelePresenceConductorsuccessfully

No licenseconsumed inConductorwhenjoining aMeetingconference fromEX90 managedby MCU 4510

UCJ11PH2S.TC.G.010

NilPassedEX60 -> Unified CM-> SIP Trunk ->Conductor ->TelePresence Serveron VM -> MeetingConference

Verify whether aShared Multipartylicense isconsumed whenCiscoTelePresenceSystemEX60(user)assigned with nolicenses initiates ameetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelePresenceConductor

SMP Licenseconsumptionwhen aconference isinitiated by anuser assignedwith no licensesin Conductor

UCJ11PH2S.TC.G.012



NilPassedMX200-G2 ->UnifiedCM -> SIP Trunk ->Conductor ->TelePresence Serveron VM -> Full HDMeeting Conference

Verify whetherCiscoTelePresenceMX200-G2registered in CiscoUnifiedCommunicationsManager can joina Full HDMeetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Joining a FullHD Meetingconference fromMX200-G2managed byCiscoTelePresenceServer on VM

UCJ11PH2S.TC.G.014

NilPassedMX300-G2 ->UnifiedCM -> SIP Trunk ->Conductor ->TelePresence ServeronVM ->HDMeetingConference

Verify whetherCiscoTelePresenceMX300-G2registered in CiscoUnifiedCommunicationsManager can joina HD Meetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Joining a HDMeetingconference fromMX300-G2managed byCiscoTelePresenceServer on VM

UCJ11PH2S.TC.G.015

NilPassedDX70 -> Unified CM-> SIP Trunk ->Conductor ->TelePresence Serveron VM -> SDMeetingConference

Verify whetherCisco DX70registered in CiscoUnifiedCommunicationsManager can joina SD Meetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Joining a SDMeetingconference fromDX70 managedby CiscoTelePresenceServer on VM

UCJ11PH2S.TC.G.016



NilPassedDX80 -> Unified CM-> SIP Trunk ->Conductor ->TelePresence Serveron VM -> Audio OnlyMeeting Conference

Verify whetherCisco DX80registered in CiscoUnifiedCommunicationsManager can joinan Audio-onlyMeetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelepresenceConductor

Joining anAudio-onlyMeetingconference fromDX80 managedby CiscoTelePresenceServer on VM

UCJ11PH2S.TC.G.017

NilPassedEX90 -> Unified CM-> SIP Trunk ->Conductor -> TS 7010-> Full HD MeetingConference

Verify whetherCiscoTelePresenceSystem EX90registered in CiscoUnifiedCommunicationsManager can joina Full HDMeetingconferencemanaged by CiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Joining a FullHD Meetingconference fromEX90 managedby CiscoTelePresenceServer 7010

UCJ11PH2S.TC.G.018

NilPassedSX80 Codec ->Unified CM -> SIPTrunk-> Conductor ->TS 7010 -> HDMeeting Conference

Verify whetherCiscoTelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager can joina HD Meetingconferencemanaged by CiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Joining a HDMeetingconference fromSX80 Codecmanaged byCiscoTelePresenceServer 7010

UCJ11PH2S.TC.G.019



NilPassedEX60 -> Unified CM-> SIP Trunk ->Conductor -> TS 7010-> SD MeetingConference

Verify whetherCiscoTelePresenceSystem EX60registered in CiscoUnifiedCommunicationsManager can joina SD Meetingconferencemanaged by CiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Joining a SDMeetingconference fromEX60 managedby CiscoTelePresenceServer 7010

UCJ11PH2S.TC.G.020

NilPassedMX300-G2 ->UnifiedCM -> SIP Trunk ->Conductor -> TS 7010-> Audio OnlyMeeting Conference

Verify whetherCiscoTelePresenceMX300-G2registered in CiscoUnifiedCommunicationsManager can joinan Audio-onlyMeetingconferencemanaged by CiscoTelePresenceServer 7010 inCiscoTelepresenceConductor

Joining anAudio-onlyMeetingconference fromMX300-G2managed byCiscoTelePresenceServer 7010

UCJ11PH2S.TC.G.021

NilPassedEX60 -> Unified CM-> SIP Trunk ->Conductor -> MCU5310 -> MeetingConference

Verify whetherCiscoTelePresenceSystem EX60registered in CiscoUnifiedCommunicationsManager can joina Meetingconferencemanaged by CiscoTelePresenceMCU 5310 inCiscoTelePresenceConductor

Joining aMeetingconference fromEX60 managedby Cisco MCU5310

UCJ11PH2S.TC.G.022



NilPassedMX200-G2 ->UnifiedCM -> SIP Trunk ->Conductor -> MCU4510 -> MeetingConference

Verify whetherCiscoTelePresenceMX200-G2registered in CiscoUnifiedCommunicationsManager can joina Meetingconferencemanaged by CiscoTelePresenceMCU 4510 inCiscoTelePresenceConductor

Joining aMeetingconference fromMX200-G2managed byCisco MCU4510

UCJ11PH2S.TC.G.023

NilPassedNAVerify whether analarm is raisedwhen the numberof PersonalMultiparty licenseowners exceedsthe number ofinstalled PersonalMultiparty licenses

Alarm raisedwhen thenumber of PMPlicense ownersexceeds thenumber ofinstalled PMPlicenses

UCJ11PH2S.TC.G.024

NilPassed500-32, EX90 ->Unified CM -> SIPTrunk -> Conductor ->TelePresence Serveron VM -> Full HDMeetingConference ->Presentation Sharing

Verify whetherCiscoTelePresenceSystem500-32 canjoin a Full HDMeetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelePresenceConductor andannotate thesharedpresentation fromCiscoTelePresenceSystem 500-32successfully

Joining a FullHD meetingconference from500-32managedby TelePresenceServer on VMin Conductorand annotatingthe sharedpresentationfrom 500-32

UCJ11PH2S.TC.G.025



NilPassed500-32, SX10 QuickSet -> Unified CM ->SIP Trunk ->Conductor ->TelePresence Serveron VM -> SDMeetingConference ->Presentation Sharing

Verify whetherCiscoTelePresenceSystem500-32 canjoin a SD Meetingconferencemanaged by CiscoTelePresenceServer on VM inCiscoTelePresenceConductor andannotate thesharedpresentation fromCiscoTelePresenceSystem 500-32successfully

Joining a SDmeetingconference from500-32managedby TelePresenceServer on VMin Conductorand annotatingthe sharedpresentationfrom 500-32

UCJ11PH2S.TC.G.026

Cisco TelePresence ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID

NilPassedMX200-G2, MX300-G2& EX90 -> Unified CM-> SIP Trunk ->Conductor -> Cisco TS7010 -> PresentationSharing

To verify that useris able to do MeetMe videoconference betweenvideo endpointsregistered withCisco UnifiedCommunicationsManager and Sharethe Presentationwhile in VideoConference usingCisco TelePresenceServer 7010 viaCisco TelePresenceConductor

PresentationSharing in aMeet Mevideoconferencebetween videoendpointsregistered withUnified CM

UCJ11PH2S.TS.G.001


Test Results SummaryCisco TelePresence Server

NilPassedMX300-G2, MX200-G2& SX80 Codec -> CiscoVCS -> Conductor ->Cisco TS 7010 ->Presentation Sharing

To verify that useris able to do MeetMe videoconference betweenvideo endpointsregistered withCisco TelePresenceVideoCommunicationServer and Sharethe Presentationwhile in VideoConference usingCisco TelePresenceServer 7010 viaCisco TelePresenceConductor

PresentationSharing in aMeet Mevideoconferencebetween videoendpointsregistered withCisco VCS

UCJ11PH2S.TS.G.002

NilPassed8945 & SX80 Codec ->Unified CM -> SIP Trunk->Conductor -> Cisco TS7010 8945 -> UnifiedCM -> Cisco DX80 ->Park/Retrieve

To verify that useris able to park theMeet Me videoconference fromCisco Unified IPPhone 8945 andretrieve theconference in CiscoDX80 using CiscoTS 7010 via CiscoTelePresenceConductor

Park the MeetMe videoconferencefrom 8945registered withUnified CMand Retrievethe conferencefrom CiscoDX80

UCJ11PH2S.TS.G.003

NilPassedNAVerify whether useris able to integrateCisco TelePresenceServer 7010 withCisco TelePresenceConductor withoutEncryption keySuccessfully

Integrate CiscoTelePresenceServer 7010with CiscoTelePresenceConductorwithoutencryption key

UCJ11PH2S.TS.G.004

NilPassedNAVerify whether useris able to integrateCisco TelePresenceServer on VMwithCisco TelePresenceConductor withoutEncryption keySuccessfully

Integrate CiscoTelePresenceServer on VMwith CiscoTelePresenceConductorwithoutencryption key

UCJ11PH2S.TS.G.005



NilPassedNAVerify whetherHTTPS andSIP/TLS enabledwith only anactivation key inCisco TelePresenceServer 7010Successfully

CheckHTTPS& SIP/TLSenabled withonly anactivation keyin CiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.006

NilPassedNAVerify whetherHTTPS andSIP/TLS enabledwith only anactivation key inCisco TelePresenceServer on VMSuccessfully

CheckHTTPS& SIP/TLSenabled withonly anactivation keyin CiscoTelePresenceServer on VM

UCJ11PH2S.TS.G.007

NilPassedSX10 Quick Set, SX80Codec & MX200-G2 ->Unified CM -> SIP Trunk-> Conductor -> CiscoTelePresence Server onVM

Verify whether useris able to do MeetMe conference callbetween CiscoTelePresence SX10Quick Set, CiscoTelePresence SX80Codec & CiscoTelePresenceMX200-G2 usingCisco TelePresenceServer on VM viaCisco TelePresenceConductorsuccessfully

Meet Meconference callbetween SX10Quick Set,SX80 Codec& MX200-G2using CiscoTelePresenceServer on VMvia Conductor

UCJ11PH2S.TS.G.008

NilPassedSX10 Quick Set, SX80Codec & MX200-G2 ->Unified CM -> SIP Trunk-> Conductor -> CiscoTelePresence Server 7010

Verify whether useris able to do MeetMe conference callbetween CiscoTelePresence SX10Quick Set, CiscoTelePresence SX80Codec & CiscoTelePresenceMX200-G2 usingCisco TelePresenceServer 7010 viaCisco TelePresenceConductorsuccessfully

Meet Meconference callbetween SX10Quick Set,SX80 Codec& MX200-G2using CiscoTelePresenceServer 7010via Conductor

UCJ11PH2S.TS.G.009



NilPassedMX300-G2 -> UnifiedCM -> SX80 CodecMX300-G2 -> Add ->Unified CM -> SIP Trunk-> Conductor -> CiscoTelePresence Server onVM -> MX200-G2

Verify whether useris able to do anadhoc videoconference callbetween CiscoTelePresenceMX300-G2, CiscoTelePresence SX80Codec & CiscoTelePresenceMX200-G2 usingCisco TelePresenceServer on VM viaCisco TelePresenceConductorsuccessfully

Adhoc Videoconference callbetweenMX300-G2,SX80 Codec& MX200-G2using CiscoTelePresenceServer on VMvia Conductor

UCJ11PH2S.TS.G.010

NilPassedMX300-G2 -> UnifiedCM -> SX80 CodecMX300-G2 -> Add ->Unified CM -> SIP Trunk-> Conductor -> CiscoTelePresence Server 7010-> MX200-G2

Verify whether useris able to do anadhoc videoconference callbetween CiscoTelePresenceMX300-G2, CiscoTelePresence SX80Codec & CiscoTelePresenceMX200-G2 usingCisco TelePresenceServer 7010 viaCisco TelePresenceConductorsuccessfully

Adhoc Videoconference callbetweenMX300-G2,SX80 Codec& MX200-G2using CiscoTelePresenceServer 7010via Conductor

UCJ11PH2S.TS.G.011



NilPassedSX10 Quick Set, SX80Codec & MX200-G2 ->Cisco VCS -> Cisco TS7010MX200-G2 -> CiscoVCS -> Cisco TS 7010 ->Presentation Sharing

Verify whether useris able to sharepresentation invideo conferencecall between CiscoTelePresence SX10Quick Set, CiscoTelePresence SX80Codec & CiscoTelePresenceMX200-G2registered withCisco TelePresenceVideoCommunicationServer using CiscoTelePresenceServer 7010Successfully

Presentationsharing invideoconference callusing CiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.012

NilPassedEX90, SX80 Codec &MX200-G2 -> CiscoVCS -> Conductor ->Cisco TelePresenceServer on VMMX200-G2 -> CiscoVCS -> Conductor ->Cisco TelePresenceServer on VM ->Presentation Sharing

Verify whether useris able to sharepresentation invideo conferencecall between CiscoTelePresenceSystem EX90,Cisco TelePresenceSX80 Codec &Cisco TelePresenceMX200-G2registered withCisco TelePresenceVideoCommunicationServer using CiscoTelePresenceServer on VM viaCisco TelePresenceConductorSuccessfully

Presentationsharing invideoconference callusing CiscoTelePresenceServer on VMvia Conductor

UCJ11PH2S.TS.G.013



NilPassedSX20 Quick Set -> CiscoVCS ->SX80 CodecSX20 Quick Set -> Add-> Cisco VCS ->MX200-G2

MX200-G2 -> CiscoVCS -> Conductor ->Cisco TelePresenceserver on VM ->Presentation Sharing

Verify whether useris able to sharepresentation invideo conferencecall between CiscoTelePresence SX20Quick Set, CiscoTelePresence SX80Codec & CiscoTelePresenceMX300-G2registered withCisco TelePresenceVideoCommunicationServer using CiscoTelePresenceServer on VM viaCisco TelePresenceConductorSuccessfully

Presentationsharing in anadhoc videoconference callusing CiscoTelePresenceServer on VMvia Conductor

UCJ11PH2S.TS.G.014

NilPassedSX10 Quick Set, SX80Codec & MX200-G2 ->Cisco VCS -> Conductor-> Cisco TS 7010MX200-G2 -> CiscoVCS -> Conductor ->Cisco TS 7010->Presentation Sharing

Verify whether useris able to sharepresentation invideo conferencecall between CiscoTelePresence SX10Quick Set, CiscoTelePresence SX80Codec & CiscoTelePresenceMX200-G2registered withCisco TelePresenceVideoCommunicationServer using CiscoTelePresenceServer 7010 viaCisco TelePresenceConductorSuccessfully

Presentationsharing invideoconference callusing CiscoTelePresenceServer 7010via Conductor

UCJ11PH2S.TS.G.015



NilPassedNAVerify whether useris getting errormessage like"Default adminuser cannot haveblank password"when no passwordis set for defaultadmin account inCisco TelePresenceServer 7010Successfully

Checking theerror messagewhen NoPassword isgiven fordefault adminaccount inCiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.016

NilPassedNAVerify whether useris getting errormessage like"Default adminuser cannot haveblank password"when no passwordis set for defaultadmin account inCisco TelePresenceServer on VMSuccessfully

Checking theerror messagewhen NoPassword isgiven fordefault adminaccount inCiscoTelePresenceServer on VM

UCJ11PH2S.TS.G.017

NilPassedNAVerify whether useris getting errormessage like "Nopasswordconfigured for user"admin";functionality isdisabled. Configurea password tocontinue." when nopassword is set fordefault adminaccount in CiscoTelePresenceServer 7010Successfully

Checking theerror message"Functionalityis disabled" ifno password isconfigured foradmin accountin CiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.018



NilPassedNAVerify whether useris getting errormessage like "Nopasswordconfigured for user"admin";functionality isdisabled. Configurea password tocontinue." when nopassword is set fordefault adminaccount in CiscoTelePresenceServer on VMSuccessfully

Checking theerror message"Functionalityis disabled" ifno password isconfigured foradmin accountin CiscoTelepresenceServer on VM

UCJ11PH2S.TS.G.019

NilPassedNAVerify whetherPreserving Feature& License keys arepresent afer Resetconfiguration isapplied in CiscoTelePresenceServer 7010

Feature &License keysafter ResetConfigurationin CiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.020

NilPassedNAVerify whetherPreserving Feature& License keys arepresent afer Resetconfiguration isapplied in CiscoTelePresenceServer on VM

Feature &License keysafter ResetConfigurationin CiscoTelePresenceServer on VM

UCJ11PH2S.TS.G.021

NilPassed7821 & 7841-> UnifiedCM -> SIP Trunk ->Cisco TS 7010 -> Audioconference 7841 ->Unified CM -> 7861 ->Park / Retrieve

Verify whether useris able to Park andretrieve the MeetMe audioconference betweenCisco IP Phone78xx endpointsusing CiscoTelePresenceServer 7010Successfully

Park andretrieve theMeet Meconferencewith 78xx IPPhones usingCiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.022



NilPassed7841 -> Unified CM ->SIP Trunk -> CiscoTelePresence Server 7010-> ParkEX90 -> Retrieve ->Cisco VCS Expressway-> Cisco VCS -> UnifiedCM -> SIP Trunk ->Cisco TelePresenceServer 7010

Verify whether useris able to Park theMeet Meconference in CiscoIP Phone 7841 &retrieve it on CiscoTelePresenceSystem EX90registered viaCollaboration edgeusing CiscoTelePresenceServer 7010Successfully

Park the MeetMe conferencein 7841 &retrieve it onEX90registered viaCollaborationEdge usingCiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.023

NilPassed8861 -> Unified CM ->SIP Trunk -> CiscoTelePresence Server 7010-> ParkEX90 -> Retrieve ->Cisco VCS Expressway-> Cisco VCS -> UnifiedCM -> SIP Trunk ->Cisco TelePresenceServer 7010

Verify whether useris able to Park theMeet Meconference in CiscoIP Phone 8861 &retrieve it on CiscoTelePresenceSystem EX90registered viaCollaboration Edgeusing CiscoTelePresenceServer 7010Successfully

Park the MeetMe conferencein 8861 &retrieve it onEX90registered viaCollaborationEdge usingCiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.024

NilPassedNAVerify whetherCross Site RequestForgery Protectionis added in CiscoTelePresenceServer 7010Successfully

Check CrossSite RequestForgeryProtection isadded in CiscoTelePresenceServer 7010

UCJ11PH2S.TS.G.025

Cisco Prime Collaboration

Cisco Prime Collaboration ProvisioningDefectsStatusDescriptionTitleLogical ID


Test Results SummaryCisco Prime Collaboration

NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addand integrate Cisco UnifiedCommunications Manager11.0 with Cisco PrimeCollaboration Provisioningusing Getting StartedWizardsuccessfully

Add and integrateCisco UnifiedCommunicationsManager 11.0 withPCP using GettingStarted Wizard

UCJ11.0S.CPC-PR.G.001

NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addand integrate Cisco UnityConnection 11.0 with CiscoPrime CollaborationProvisioning using GettingStarted Wizard successfully

Add and integrateCisco UnityConnection 11.0with PCP usingGetting StartedWizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addand integrate Cisco UnifiedCommunications ManagerIM & Presence 11.0 withCisco Prime CollaborationProvisioning using GettingStarted Wizard successfully

Add and integrateCisco UnifiedCommunicationsManager IM &Presence 11.0 withPCP using GettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able toview error Messagenotification while addingCustomized Cisco UnityConnection Applicationthrough Getting StartedWizard

Error Messagenotification whileadding CustomizedCisco UnityConnectionApplicationthrough GettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able toview error Messagenotification while addingCustomized Cisco UnifiedCommunications ManagerApplication through GettingStarted Wizard

Error Messagenotification whileadding CustomizedCisco UnifiedCommunicationsManagerApplicationthrough GettingStarted Wizard



Test Results SummaryCisco Prime Collaboration Provisioning

NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able toview error Messagenotification while addingCustomized Cisco UnifiedCommunications ManagerIM & Presence Applicationthrough Getting StartedWizard

Error Messagenotification whileadding CustomizedCisco UnifiedCommunicationsManager IM &PresenceApplicationthrough GettingStarted Wizard


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for SecurityDiagnostic Tool usingCommunications ManagerReporting successfully

Generate and viewthe report forSecurityDiagnosticTool usingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager DatabaseReplication Debug usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CMDatabaseReplication DebugusingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager ExtensionMobilityusing CommunicationsManager Reportingsuccessfully

Generate and viewthe report forUnified CMExtensionMobilityusingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManagerGeoLocation Policyusing CommunicationsManager Reportingsuccessfully

Generate and viewthe report forUnified CMGeoLocationPolicy usingCommunicationsManager Reporting




NilPassedVerify that user is able toview Unique SSH Keys forthe Cisco PrimeCollaboration Provisioningafter upgraded from 10.6 to11.0 successfully

CheckUnique SSHKeys for PCP 11.0


NilPassedVerify that user is able toview Unique SSHCertificates for the CiscoPrime CollaborationProvisioning after upgradedfrom 10.6 to 11.0successfully

CheckUnique SSHCertificates forPCP 11.0


NilPassedGo to Administration ->Settings and verify that useris able to stop "In progressorders" automatically after15 minutes throughAdministration successfully

Stop "In progressorders" after 15minutes throughAdministration


NilPassedGo to Administration ->Settings and verify that useris able to stop "In progressorders" automatically after30 minutes throughAdministration successfully

Stop "In progressorders" after 30minutes throughAdministration


NilPassedGo to Administration ->Settings and verify that useris able to stop "In progressorders" automatically after 1hour through Administrationsuccessfully

Stop "In progressorders" after 1 hourthroughAdministration


NilPassedVerify that user is unable toauto configure Cisco PrimeCollaboration Provisioningwhile using Answer file withmissing mandatory fields

AutoConfigurationstatus, while createthe Answer File byomitting someMandatory Fieldsfor Touch lessinstall of PCP


NilPassedVerify that user is able tologin as admin /root userdirectly once the server isbooted successfully

Successfulimplementation ofPCP AutoConfiguration




NilPassedVerify that user is able tocomplete auto configurationof Cisco PrimeCollaborationProvisioning and use evalLicense successfully

Touchless install ofPCP using evalLicense


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to configureEmergency Location (ELIN)and ELINGroup using batchfile through Cisco PrimeCollaboration Provisioning

ConfigureEmergencyLocation (ELIN)and ELIN Groupusing batch filethrough PCP


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to view errormessage notification whileconfigure existingEmergency Location (ELIN)Number using batch filethrough Cisco PrimeCollaboration Provisioning

Error messagenotification whileconfigure existingEmergencyLocation (ELIN)Number usingbatch file throughPCP


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able tovalidate and add CiscoUnified CommunicationsManager IM & PresenceApplication with TestConnection tab available at2nd step of Getting StartedWizard successfully

Validate CiscoUnifiedCommunicationsManager IM &PresenceApplication withTest Connectiontab throughGettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able tovalidate and add CiscoUnified CommunicationsManager Application withTest Connection tabavailable at 2nd step ofGetting Started Wizardsuccessfully

Validate CiscoUnifiedCommunicationsManagerApplication withTest Connectiontab throughGettingStarted Wizard




NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able tovalidate and add Cisco UnityConnectionApplicationwithTest Connection tabavailable at 2nd step ofGetting Started Wizardsuccessfully

Validate CiscoUnity ConnectionApplication withTest Connectiontab throughGettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addand integrate Cisco UnityConnection by enablingUnified Messaging withCisco Prime CollaborationProvisioning using GettingStarted Wizard successfully

Add and integrateCisco UnityConnection byenabling UnifiedMessaging withPCP using GettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addDomain to Cisco PrimeCollaboration Provisioningusing UnifiedCommunications ServiceConfiguration throughGetting Started Wizardsuccessfully

Adding a Domainto PCP usingUnifiedCommunicationsServiceConfigurationthrough GettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addService Area for therespective Domain to CiscoPrime CollaborationProvisioning using UnifiedCommunications ServiceConfiguration throughGetting Started Wizardsuccessfully

Adding ServiceArea for therespective Domainto PCP usingUnifiedCommunicationsServiceConfigurationthrough GettingStarted Wizard




NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addService Area with Dial Planfor the respective Domain toCisco Prime CollaborationProvisioning using UnifiedCommunications ServiceConfiguration throughGetting Started Wizardsuccessfully

Adding ServiceArea with DialPlan for therespective Domainto PCP usingUnifiedCommunicationsServiceConfigurationthrough GettingStarted Wizard


NilPassedGo to Infrastructure Setup ->Getting Started Wizard andverify that user is able to addUser Role for the respectiveDomain to Cisco PrimeCollaboration Provisioningusing UnifiedCommunications ServiceConfiguration throughGetting Started Wizardsuccessfully

Adding User Rolefor the respectiveDomain to PCPusing UnifiedCommunicationsServiceConfigurationthrough GettingStarted Wizard


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManagerGeoLocation Policywith Filter usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CMGeoLocationPolicy with FilterusingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Lines withoutPhones usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CM Lineswithout PhonesusingCommunicationsManager Reporting




NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Phone ConfigVersion Report usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CM PhoneConfig VersionReport usingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Phone Feature Listusing CommunicationsManager Reportingsuccessfully

Generate and viewthe report forUnified CM PhoneFeature List usingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Phone LocaleInstallers usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CM PhoneLocale InstallersusingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Phones WithMismatched Load usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CMPhones WithMismatched LoadusingCommunicationsManager Reporting




NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Shared Lines usingCommunications ManagerReporting successfully

Generate and viewthe report forUnifiedCMSharedLines usingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Table CountSummary usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CM TableCount SummaryusingCommunicationsManager Reporting


NilPassedGo to Reports ->Communications ManagerReporting and verify thatuser is able to generate andview the report for CiscoUnified CommunicationsManager Voice Mail usingCommunications ManagerReporting successfully

Generate and viewthe report forUnified CM VoiceMail usingCommunicationsManager Reporting


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Cisco Unified CMGroup for the specified CiscoUnified CommunicationsManager using InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured CiscoUnified CM Group isreplicated at Cisco UnifiedCommunications ManagerWeb GUI

Add and validateCisco Unified CMGroup for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP




NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Date/TimeGroup for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configuredDate/Time Group isreplicated at Cisco UnifiedCommunications ManagerWeb GUI

Add and validateDate/Time Groupfor the specifiedUnified CM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd DeviceMobility Info forthe specified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured DeviceMobility Info is replicated atCisco UnifiedCommunications ManagerWeb GUI

Add and validateDevice MobilityInfo for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Physical Location for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured PhysicalLocation is replicated atCisco UnifiedCommunications ManagerWeb GUI

Add and validatePhysical Locationfor the specifiedUnified CM usingInfrastructureConfigurationthrough PCP




NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd GeoLocationConfiguration for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configuredGeoLocation Configurationis replicated at Cisco UnifiedCommunications ManagerWeb GUI

Add and validateGeoLocationConfiguration forthe specifiedUnified CM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd GeoLocation Filter forthe specified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configuredGeoLocation Filter isreplicated at Cisco UnifiedCommunications ManagerWeb GUI

Add and validateGeoLocation Filterfor the specifiedUnified CM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Route Group for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured RouteGroup is replicated at CiscoUnified CommunicationsManager Web GUI

Add and validateRoute Group forthe specifiedUnified CM usingInfrastructureConfigurationthrough PCP




NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Route Pattern for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured RoutePattern is replicated at CiscoUnified CommunicationsManager Web GUI

Add and validateRoute Pattern forthe specifiedUnified CM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Line Group for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured LineGroup is replicated at CiscoUnified CommunicationsManager Web GUI

Add and validateLine Group for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Hunt Pilot for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured HuntPilot is replicated at CiscoUnified CommunicationsManager Web GUI

Add and validateHunt Pilot for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP




NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Partition for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured Partitionis replicated at Cisco UnifiedCommunications ManagerWeb GUI

Add and validatePartition for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Calling Search Space forthe specified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configured CallingSearch Space is replicated atCisco UnifiedCommunications ManagerWeb GUI

Add and validateCalling SearchSpace for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Administration ->Settings and verify that useris able to stop "In progressorders" automatically after 8hours throughAdministration successfully

Stop "In progressorders" after 8hours throughAdministration


NilPassedGo to Administration ->Settings and verify that useris able to stop "In progressorders" automatically after12 hours throughAdministration successfully



NilPassedGo to Administration ->Settings and verify that useris able to stop "In progressorders" automatically after24 hours throughAdministration successfully





NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Speed Dials underEndpoint Features for SelfCare portal Accesssuccessfully

Enable andconfigure SpeedDials underEndpoint Featuresfor Self Care portalAccess


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Do Not Disturbunder Endpoint Features forSelf Care portal Accesssuccessfully

Enable andconfigure Do NotDisturb underEndpoint Featuresfor Self Care portalAccess


NilPassedGo to Administration ->Settings and verify that useris able to enable Localeunder Endpoint Features forSelf Care portal Accesssuccessfully

Enable Localeunder EndpointFeatures for SelfCare portal Access


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Music On Holdunder Endpoint Features forSelf Care portal Accesssuccessfully

Enable andconfigure MusicOn Hold underEndpoint Featuresfor Self Care portalAccess


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Call Forwardunder Line Features for SelfCare portal Accesssuccessfully

Enable andconfigure CallForward underLine Features forSelf Care portalAccess


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Caller ID underLine Features for Self Careportal Access successfully

Enable andconfigure Caller IDunder LineFeatures for SelfCare portal Access


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Music On Holdunder Line Features for SelfCare portal Accesssuccessfully

Enable andconfigure MusicOn Hold underLine Features forSelf Care portalAccess




NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Speed Dials underExtensionMobility Featuresfor Self Care portal Accesssuccessfully

Enable andconfigure SpeedDials underExtensionMobilityFeatures for SelfCare portal Access


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Do Not Disturbunder Extension MobilityFeatures for Self Care portalAccess successfully

Enable andconfigure Do NotDisturb underExtensionMobilityFeatures for SelfCare portal Access


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Music On Holdunder Extension MobilityFeatures for Self Care portalAccess successfully

Enable andconfigure MusicOn Hold underExtensionMobilityFeatures for SelfCare portal Access


NilPassedGo to Administration ->Settings and verify that useris able to enable Localeunder Extension MobilityFeatures for Self Care portalAccess successfully

Enable Localeunder ExtensionMobility Featuresfor Self Care portalAccess


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Do Not Disturbunder RDP Features for SelfCare portal Accesssuccessfully

Enable andconfigure Do NotDisturb under RDPFeatures for SelfCare portal Access


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Music On Holdunder RDP Features for SelfCare portal Accesssuccessfully

Enable andconfigure MusicOn Hold underRDP Features forSelf Care portalAccess




NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigureAlternateNumbersunder RDP Features for SelfCare portal Accesssuccessfully

Enable andconfigure AlternateNumbers underRDP Features forSelf Care portalAccess


NilPassedGo to Administration ->Settings and verify that useris able to enable andconfigure Call Forwardunder RDP Line Features forSelf Care portal Accesssuccessfully

Enable andconfigure CallForward underRDP Line Featuresfor Self Care portalAccess


NilPassedVerify that user is unable toauto configure Cisco PrimeCollaboration Provisioningwhile using answer file withsome wrong credentials likeinvalid mask/gateway

AutoConfigurationstatus, while createthe answer file withsome wrongcredentials likeinvalidmask/gateway forTouch less installof PCP


NilPassedVerify that user is able tocomplete auto configurationof Cisco PrimeCollaborationProvisioning and useStandard Licensesuccessfully

Touchless install ofPCP usingStandard License


NilPassedVerify that user is able tocomplete auto configurationof Cisco PrimeCollaborationProvisioning and useAdvanced Licensesuccessfully

Touchless install ofPCP usingAdvanced License


NilPassedVerify that user is able tocomplete auto configurationof Cisco PrimeCollaborationProvisioning and use UTCTime Zone successfully

Touchless install ofPCP using TimeZone as UTC




NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to view errormessage notification whileconfigure EmergencyLocation (ELIN) Numberwithout Route Partitiondetails using batch filethrough Cisco PrimeCollaboration Provisioning

Error messagenotification whileconfigureEmergencyLocation (ELIN)Number withoutRoute Partitiondetails using batchfile through PCP


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to view errormessage notification whileconfigure EmergencyLocation (ELIN) Numberwithout Device Pool detailsusing batch file throughCisco Prime CollaborationProvisioning

Error messagenotification whileconfigureEmergencyLocation (ELIN)Number withoutDevice Pool detailsusing batch filethrough PCP


NilPassedGo to Infrastructure Setup ->Infrastructure Configurationand verify that user is able toadd Call Park for thespecified Cisco UnifiedCommunications Managerusing InfrastructureConfiguration through CiscoPrime CollaborationProvisioning and verifywhether configuredCall Parkis replicated at Cisco UnifiedCommunications ManagerWeb GUI

Add and validateCall Park for thespecified UnifiedCM usingInfrastructureConfigurationthrough PCP


NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService with MOH SourceWhile Participant is Waitingas Silence Audio Source

Configuring MOHSource WhileParticipant isWaiting as SilenceAudio Source


NilPassedGo to Device Setup andverify whether user is able tosave description with specialcharacter while configuringConference Now ServiceSuccessfully

Description withspecial characterwhile configuringConference NowService




NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService with a New RoutePartition Successfully

ConfiguringConference NowService with a NewRoute Partition


NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService with an existingRoute Partition Successfully

ConfiguringConference NowService with anexisting RoutePartition


NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService withMaximumWaitTime For Host as 5 minutes

ConfiguringConference NowService withMaximum WaitTime For Host as 5minutes


NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService withMaximumWaitTime For Host as 20minutes

ConfiguringConference NowService withMaximum WaitTime For Host as20 minutes


NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService withMaximumWaitTime For Host as 60minutes

ConfiguringConference NowService withMaximum WaitTime For Host as60 minutes


NilPassedGo to Device Setup andverify whether user is able toconfigure Conference NowService with MOH SourceWhile Participant is Waitingas Sample Audio Source

ConfiguringConference NowService with MOHSource WhileParticipant isWaiting as SampleAudio Source


NilPassedGo to Device Setup andverify whether user is able todisable Conference NowService in UC ServiceSuccessfully

DisableConferenceNowService in UCServices


NilPassedGo to Device Setup andverify whether user is able toremove the Calling SearchSpaces in Conference NowService Successfully

Remove theCalling SearchSpaces inConference NowService




NilPassedGo to Device Setup andverify whether user is able tosave Description in Japaneselanguage while configuringConference Now ServiceSuccessfully

Description inJapanese languagewhile configuringConference NowService


NilPassedGo to Device Setup andverify whether user is able toCheck the ConfiguredCalling Search Spaces atCisco UnifiedCommunications Managerwhich is displayed inConference Now ServiceSuccessfully

Check theConfigured CallingSearch Spaces inConference NowService


NilPassedGo to Device Setup andverify whether user is able tocheck the updated CallingSearch Spaces name in CiscoUnified CommunicationsManager displaying in theCalling Search Spaces list

Check the updatedCalling SearchSpaces namedisplaying inCalling SearchSpaces list


NilPassedGo to Administration ->License Management andverify whether user is able tovalidate used Endpointpercentage Successfully

Validate usedEndpointpercentage inLicenseManagement


NilPassedGo to Device Setup andverify whether user is able tocheck deleted Existing RoutePartition in Cisco UnifiedCommunications Mangerwhich is not displayed inConference Now Service

Check ExistingRoute Partitionafter deleting inConference NowService


NilPassedGo to Device Setup andverify whether user is able tocheck deleted Calling SearchSpaces in Conference NowService Successfully

Check deletedCalling SearchSpaces inConference NowService


NilPassedGo to Activities ->Provisioning History andverify whether user is able tosearch Order NumberSuccessfully

Search OrderNumber inProvisioningHistory




NilPassedGo to Activities ->Provisioning History andverify whether user is able tosearch Order Status as"COMPLETE" inProvisioning HistorySuccessfully

Search OrderStatus asCOMPLETE inProvisioningHistory


NilPassedGo to Dashboard and verifywhether user is able to checkLogged In Users details afterDetach Successfully

Check Logged InUsers details afterDetach


NilPassedGo to Device Setup andverify whether user is able toremove the Media ResourceGroup List in ConferenceNow Service Successfully

Remove theConfigured MediaResource GroupList in ConferenceNow Service


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCommon Jabber TemplateSuccessfully

Creating CommonJabber Template inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createUniversal Line TemplateSuccessfully

Creating UniversalLine Template inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createa User Services TemplateSuccessfully

Creating a UserServices Templatein ProvisioningSetup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createan Extension Mobility LineTemplate Successfully

Creating ExtensionMobility LineTemplate inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to add aService Area in TemplateSettings Successfully

Adding a ServiceArea in TemplateSettings




NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to getwarning message whenadding already existingService Area Name inTemplate SettingsSuccessfully

Get warningmessage whenadding alreadyexisting ServiceArea Name inTemplate Settings


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to deletea Service Area in TemplateSettings Successfully

Deleting a ServiceArea for CommonJabber in TemplateSettings inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to Copyan existing common JabberTemplate Successfully

Copying anexisting commonJabber Template inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able toDelete a common JabberTemplate Successfully

Deleting aCommon JabberTemplate inProvisioning Setup


NilPassedGo to Administration ->Updates and verify whetheruser is able to get warningmessage when uploadingwrong file in SSLCertificates

Get warningmessage whenuploading wrongfile in SSLCertificates


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco 8851 EndpointTemplate by using Common88XX Successfully

Creating Cisco8851 EndpointTemplate by usingCommon 88XXtemplate inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco 8831 EndpointTemplate Common 88XXSuccessfully

Creating Cisco8831 EndpointTemplate by usingCommon 88XXtemplate inProvisioning Setup




NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco 9951 EndpointTemplate Successfully

Creating Cisco9951 EndpointTemplate inProvisioning Setup











NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco Jabber for AndroidEndpoint TemplateSuccessfully

Creating Ciscojabber for AndroidEndpoint Templatein ProvisioningSetup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco Jabber for BlackBerryEndpoint TemplateSuccessfully

Creating CiscoJabber forBlackBerryEndpoint Templatein ProvisioningSetup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco Jabber for DesktopEndpoint TemplateSuccessfully

Creating CiscoJabber for DesktopEndpoint Templatein ProvisioningSetup




NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco Jabber for iPhoneEndpoint TemplateSuccessfully

Creating CiscoJabber for iPhoneEndpoint Templatein ProvisioningSetup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createSX20 Endpoint TemplateSuccessfully

Creating SX20Endpoint Templatein ProvisioningSetup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createSX10 Endpoint TemplateSuccessfully

Creating SX10Endpoint Templatein ProvisioningSetup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createCisco Jabber for TabletTemplate Successfully

Creating CiscoJabber for TabletTemplate inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to createTelePresence 500-32Endpoint TemplateSuccessfully

CreatingTelePresence500-32 EndpointTemplate inProvisioning Setup


NilPassedGo to Device Setup andverify whether user is able tocheck deleted Device Pool inCisco UnifiedCommunications Managerwhich is not displayed inConference Now ServiceSuccessfully

Check deletedDevice Pool inConference NowService




NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to geterror message notificationwhile creating EndpointTemplate with doublequotes("")

Get error messagenotification whilecreating EndpointTemplate withdouble quotes inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to searchexisting Endpoint Templatein Name box and get thesearched existing EndpointTemplate

Search existingEndpoint Templatename inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to selectcolumns such as Name,Service and Processor andsearch Service Templatedetails

Select columnssuch as Name,Service andProcessor andsearch ServiceTemplate details inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to searchName contain with alphabetsby using Advanced Filter

Searching Namecontain withalphabets by usingAdvanced Filter


NilPassedGo to AdvancedProvisioning -> ManageEndpoints and verifywhether user is able to exportSelected EndpointsSuccessfully

Export SelectedEndpoints inManage Endpoints


NilPassedGo to AdvancedProvisioning -> ManageEndpoints and verifywhether user is able to deleteSelected EndpointsSuccessfully

Delete SelectedEndpoints inManage Endpoints




NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to geterror message notificationwhile creating EndpointTemplate withpercentage(%)

Get error messagenotification whilecreating EndpointTemplate withpercentage inProvisioning Setup


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to geterror message notificationwhile creating EndpointTemplate with AsteriskSymbol (*)

Get error messagenotification whilecreating EndpointTemplate withAsterisk Symbol inProvisioning Setup


NilPassedGo to Reports -> EndpointInventory and verify whetheruser is able to get EndpointsInventory Report by usingSearch button

Get the EndpointsInventory Report


NilPassedGo to Reports -> EndpointInventory and verify whetheruser is able to exportEndpoints Inventory ReportSuccessfully

ExportingEndpointsInventory Report


NilPassedGo to Reports -> EndpointInventory and verify whetheruser is able to scheduleEndpoints Inventory ReportSuccessfully

SchedulingEndpointsInventory Report


NilPassedGo to Reports ->Endpoint/Line MismatchReports and verify whetheruser is able to export Userswithout lines Successfully

Exporting Userswithout lines inEndpoint/LineMismatch Reports


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to addPaging Server BroadcastConfiguration batch file andcheck the settings are correctin Paging Server

Add Paging ServerBroadcastConfigurationbatch file in BatchProvisioning




NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to addPaging Server SIP Accessbatch file and check thesettings are correct in PagingServer

Add Paging ServerSIP Access batchfile in BatchProvisioning


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to addPaging ServerAdministration CiscoUnified CommunicationsManager ClusterConfiguration batch file andcheck the settings are correctin Paging Server

Add Paging ServerAdministrationCUCM ClusterConfigurationbatch file in BatchProvisioning


NilPassedGo to Device Setup andverify whether user is able tosearch device name withAsterisk in Name boxsuccessfully

Search DeviceName in DeviceSetup page


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to addSet SNMP CommunityString batch file and checkthe settings are correct inCisco UnifiedCommunications Manager

Add Set SNMPCommunity Stringbatch file in BatchProvisioning


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to addSIP Trunk batch file andcheck the settings are correctin Cisco UnifiedCommunications Manager

Add SIP Trunkbatch file in BatchProvisioning




NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to addApplication User batch fileand check the settings arecorrect in Cisco UnifiedCommunications Manager

Add ApplicationUser batch file inBatch Provisioning


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to editAttributes of Paging ServerBroadcast Configurationbatch file

Editing Attributesof Paging ServerBroadcastConfigurationbatch file in BatchProvisioning


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to deletePaging Server SIP Accessbatch file

Delete PagingServer SIP Accessbatch file in BatchProvisioning


NilPassedGo to AdvancedProvisioning -> BatchProvisioning and verifywhether user is able to exportPaging ServerAdministration CiscoUnified CommunicationsManager ClusterConfiguration batch file

Export PagingServerAdministrationCUCM ClusterConfigurationbatch file in BatchProvisioning


NilPassedGo toAdministrator->Updates andverify whether user is able tocheck the SSL certificateafter installation of CiscoPrime CollaborationProvisioning 11.0 in Updates

Check the SSLcertificate afterinstallation of PCP11.0


NilPassedGo to Administration ->Maintenance mode andverify whether user is able toget Warning message whensaving more than 200characters

Get Warningmessage whensaving more than200 characters inMaintenance mode




NilPassedGo to Administration ->Maintenance mode andverify whether user is able toconfigure 5 minutes delaybefore Maintenance Modebegins

Configuring 5minutes delaybeforeMaintenanceModebegins


NilPassedGo to Administration ->Maintenance mode andverify whether user is able toget Maintenance ModeImmediately

Check user get theMaintenance modeimmediately


NilPassedGo to Dashboard , LoggedIn User dashlet and verifywhether user is able toLogout theUser Successfully

Logout User inLogged In Userdashlet


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to saveName filter with specialcharacter by using AdvancedFilter

Save Name filterwith specialcharacter by usingAdvanced Filter


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to saveService filter with specialcharacter by using AdvancedFilter

Save Service filterwith specialcharacter by usingAdvanced Filter


NilPassedGo to Provisioning Setup ->Domain -> ServiceTemplates and verifywhether user is able to saveProcessor filter with specialcharacter by using AdvancedFilter

Save Processorfilter with specialcharacter by usingAdvanced Filter


Cisco Prime Collaboration AssuranceDefectsStatusDescriptionTitleLogical ID


Test Results SummaryCisco Prime Collaboration Assurance

NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify if the user is able tofilter the CDR Report forGood call quality in CiscoPrime CollaborationAssurance MSP Mode

Filter CDR Reportfor Good callquality in CPCAssurance MSPmode

UCJ11.0.1S.CPC-AS.G.001

NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CDRReport for Acceptable callquality in Cisco PrimeCollaboration AssuranceMSP mode

Filter CDR Reportfor Acceptable callquality in CPCAssurance MSPmode


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CMRReport for Poor call qualityin Cisco PrimeCollaboration AssuranceMSP mode

Filter CMR Reportfor Poor call qualityin CPC AssuranceMSP mode


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CMRReport for All call quality inCisco Prime CollaborationAssurance MSP mode

Filter CMR Reportfor All call qualityin CPC AssuranceMSP mode


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CDRReport for past 30 minutesunder Call Signaling time inCisco Prime CollaborationAssurance MSP mode

Filter CDR Reportfor past 30 minutesunder CallSignaling time


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CMRReport for particular StartTime and End Time underCall Signaling time in CiscoPrime CollaborationAssurance MSP mode

Filter CMR Reportfor particular StartTime and End Timeunder CallSignaling time




NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CDRReport for "All" underTermination Cause Code inCisco Prime CollaborationAssurance MSP mode

Filter CDR Reportfor "All" underTermination CauseCode


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CMRReport for "Jitter >= 30milliseconds" in CiscoPrime CollaborationAssurance MSP mode

Filter CMR Reportfor "Jitter >= 30milliseconds


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CDRReport for "Call type -Video and Call class -On-Net" in Cisco PrimeCollaboration AssuranceMSP mode

Filter CDR Reportfor "Call type -Video and Callclass - On-Net"


NilPassedGo to Assurance Reports ->CDR & CMR Reports andverify whether the user isable to filter the CDRReport for TerminationType "Success" in CiscoPrime CollaborationAssurance MSP mode

Filter CDR Reportfor TerminationType "Success"


NilPassedGo to Diagnose -> LogCollection Center and verifywhether user is able tomodify credentials fordevices in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for theCredentialsmodification fordevices in LogCollectionCenter inCPC AssuranceEnterprise mode


NilPassedGo to Diagnose -> LogCollection Center and verifywhether user is able toModify TimeZone fordevices in Cisco PrimeCollaboration AssuranceMSP mode

Check for theTimeZonemodification fordevices in LogCollectionCenter inCPC AssuranceMSP mode




NilPassedGo to Diagnose -> LogCollection Center and verifywhether user is blocked tomodify a new log collectiontemplate as Operator user inCisco Prime CollaborationAssurance Enterprise mode

Modify a newtemplate forcollecting logs inCPC AssuranceEnterprise mode asOperator user


NilPassedGo to Diagnose -> LogCollection Center and verifywhether user is blocked todelete a log collectiontemplate as Helpdesk userin Cisco PrimeCollaboration AssuranceEnterprise mode

Delete a templatefor collecting logsin CPC AssuranceEnterprise mode asHelpdesk user


NilPassedGo to Diagnose -> LogCollection Center and verifywhether user is blocked tocreate a new log collectiontemplate as NetworkAdministrator user in CiscoPrime CollaborationAssurance Enterprise mode

Create a newtemplate forcollecting logs inCPC AssuranceEnterprise mode asNetworkAdministrator user


NilPassedGo to Opsview -> Clusterhealth summary and verifywhether user can view thehard and soft unregisteredendpoints separately inCisco Prime CollaborationAssurance Enterprise mode

Check for Tabularview endpointunregistered countshowing separatelyas hard and softendpoints


NilPassedGo to Get Advanced-> Addlicense and verify whetheruser can upgrade CPC 11.0from Standard mode toAdvanced mode using "GetAdvanced" option in CiscoPrime CollaborationAssurance

Check to upgradeCPC 11.0 fromStandard mode toAdvanced modeusing "GetAdvanced" option


NilPassedGo to Device Inventory ->Add device, give all therequired data for CiscoUnified CommunicationsManager 11.0 and verifywhether user is able todiscover in Cisco PrimeCollaboration AssuranceMSP mode

DiscoveringUnified CM 11.0 inCPC Assurance11.0 MSP mode




NilPassedGo to SystemAdministration -> LicenseManagement and verifywhether Cisco PrimeCollaboration Assurance issupported for 11.0 licenses

Check for 11.0license support inCPC Assurance11.0 MSP Build


NilPassedVerify whether Cisco PrimeCollaboration Assurance iscompatible with the GoogleChrome 44 and not showingany unsupported message inlogin page

Checking CPCAssurancecompatibility withChrome 44


NilPassedVerify for Cisco PrimeCollaboration Assurance isnot compatible with theMozilla FF 39.0 andshowing "Browser notsupported" error message

Checking CPCAssurancecompatibility withMozilla FF 39.0


NilPassedVerify whether unlockeduser can login using thesame previous credentialsafter unlocking using adminin Cisco PrimeCollaboration AssuranceEnterprise mode

Check for unlockeduser can login againusing the sameprevious credentialsin CPC AssuranceEnterprise mode


NilPassedGo to Administration ->User Management andverify whetherNon-globaladmin superadministrator user is able tocreate new user in CiscoPrime CollaborationAssurance MSP mode

Creating new userusingNon-globaladminsuper administratoruser in CPCAssurance MSPmode


NilPassedGo to Administration ->User Management andverify whetherNon-globaladmin superadministrator user is able toview the other users whichhave less roles in its owndomain in Cisco PrimeCollaboration AssuranceEnterprise mode

Check forNon-globaladminsuper administratoruser to view theother users whichhave less roles inCPC AssuranceEnterprise mode




NilPassedGo to Administration ->User Management andverify whetherNon-globaladmin superadministrator user can resetpassword for the other userswhich have less roles in itsown domain in Cisco PrimeCollaboration AssuranceMSP mode

Check forNon-globaladminsuper administratoruser can resetpassword for theother users whichhave less roles inCPC AssuranceMSP mode


NilPassedGo to Administration ->User Management andverify for Notificationpopup whenNon-globaladmin superadministrator user resetpassword for the other usersusing old password in CiscoPrime CollaborationAssurance Enterprise mode

Check forNotification popupwhenNon-globaladminsuper administratoruser reset passwordfor the other usersusing old passwordin CPC AssuranceEnterprise mode


NilPassedVerify to upgrade CPC 11.0from CPC 10.6 snapshot inCisco Prime CollaborationAssurance Enterprise mode

Upgrade to CPC11.0 fromCPC 10.6snapshot


NilPassedGo to Administration ->Customer Management andverify whether user is ableto delete and create 75customers in Cisco PrimeCollaboration AssuranceEnterprise mode

Deleting andCreating 75customers in CPCAssuranceEnterprise mode


NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user can sort thePool Name column in CiscoPrime CollaborationAssurance

Sorting Pool Namecolumn underConductor BridgePool Utilization


NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user can sort theVideo Ports / Screen LicenseUtilization column in CiscoPrime CollaborationAssurance

Sorting Video Ports/ Screen LicenseUtilization columnunder ConductorBridge PoolUtilization




NilPassedGo toMonitor -> UtilizationMonitor and verify whetheruser can mark UtilizationMonitor as favourite and thesame is available in thefavourite list in Cisco PrimeCollaboration Assurance

MarkingUtilizationMonitor asfavourite andchecking the samein the favorite list


NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user can crosslaunch graphical view ofVideo Ports / Screen LicenseUtilization in Cisco PrimeCollaboration Assurance

Cross launchinggraphical view ofVideo Ports /Screen LicenseUtilization


NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user can viewUtilization in % data ingraphical view of VideoPorts / Screen LicenseUtilization in Chart mode inCisco Prime CollaborationAssurance

Viewing Utilizationin % data ingraphical view ofVideo Ports /Screen LicenseUtilization in Chartmode


NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user can viewUtilization in Absolute datain graphical view of VideoPorts / Screen LicenseUtilization in Grid mode inCisco Prime CollaborationAssurance

Viewing Utilizationin Absolute data ingraphical view ofVideo Ports /Screen LicenseUtilization in Gridmode


NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user can exportVideo Ports / Screen LicenseUtilization data into CSVformat in Cisco PrimeCollaboration Assurance

Exporting VideoPorts / ScreenLicense Utilizationdata into CSVformat




NilPassedGo toMonitor -> UtilizationMonitor -> ConductorBridge Pool and verifywhether user export VideoPorts / Screen LicenseUtilization data into PDFformat in Cisco PrimeCollaboration Assurance

Exporting VideoPorts / ScreenLicense Utilizationdata into PDFformat


NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged Cisco UnifiedCommunications Managerwithout providing anycredentials and OID asSystem in Cisco PrimeCollaboration Assurance

Performing SNMPWalk for managedUnified CMwithout providingany credentials andOID as System


NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged CiscoTelePresence VideoCommunication ServerControl without providingany credentials and OID asSystem in Cisco PrimeCollaboration Assurance

Performing SNMPWalk for managedCisco VCS withoutproviding anycredentials andOIDas System


NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged Cisco MCU 5310without providing anycredentials and OID asSystem in Cisco PrimeCollaboration Assurance

Performing SNMPWalk for managedCisco MCU 5310without providingany credentials andOID as System


NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged Cisco UnityConnection withoutproviding any credentialsand OID as System in CiscoPrime CollaborationAssurance

Performing SNMPWalk for managedCisco UnityConnection withoutproviding anycredentials andOIDas System




NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged Cisco UnifiedCommunications Managerwithout providing anycredentials and OID asInterfaces in Cisco PrimeCollaboration Assurance

Performing SNMPWalk for managedUnified CMwithout providingany credentials andOID as Interfaces


NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged CiscoTelePresence VideoCommunication ServerControl without providingany credentials and OID asInterfaces in Cisco PrimeCollaboration Assurance

Performing SNMPWalk for managedCisco VCS withoutproviding anycredentials andOIDas Interfaces


NilPassedGo to Device Inventory ->SNMPMIBQuery Tool andverify whether user canperform SNMP Walk for amanaged Cisco UnityConnection withoutproviding any credentialsand OID as Interfaces inCisco Prime CollaborationAssurance

Performing SNMPWalk for managedCisco UnityConnection withoutproviding anycredentials andOIDas Interfaces


NilPassedGo to Device Inventory ->Inventory Schedule andverify whether user can adda schedule for IP PhoneCollection in Cisco PrimeCollaboration AssuranceEnterprise mode

Adding a schedulefor IP PhoneCollection underInventory Schedulein CPC AssuranceEnterprise mode


NilPassedGo to Monitor -> SystemView -> Performance andverify whether user cancreate a Custom Dashboardwith Historical Trend inGraph View for CiscoUnified CommunicationsManager

Creating a CustomDashboard withHistorical Trend forUnified CM inGraph View




NilPassedGo to AssuranceAdministration -> CDRAnalysis Settings and verifywhether user can changeGood Grade settingsthreshold value for LongCall SCSR Ranges

Change GoodGrade settingsthreshold value forLong Call SCSRRanges


NilPassedGo to AssuranceAdministration -> CDRAnalysis Settings and verifywhether user can changeAcceptable Grade settingsthreshold value for ShortCall SCSR Ranges

Change AcceptableGrade settingsthreshold value forShort Call SCSRRanges


NilPassedGo to AssuranceAdministration -> CDRAnalysis Settings and verifywhether user can changePoor Grade settingsthreshold value for LongCall SCSR Ranges

Change Poor Gradesettings thresholdvalue for Long CallSCSR Ranges


NilPassedGo to Diagnose -> LogCollection Center and verifyNon super administratoruser could not create a newlog collection template

Check for Nonsuper administratoruser could notcreate a new logcollection template


Cisco Prime Collaboration AnalyticsDefectsStatusDescriptionTitleLogical ID

NilPassedGo to Analytics ->Technology Adoption andverify whether the user isable to validate Metrics forAudio Endpoints Deployedfor 1 month after upgradeCPCAnalytics from 10.6 to11.0 build

Validate Metricsfor AudioEndpointsDeployed for 1month afterupgrade 10.6.1 to11.0 build

UCJ11.0.1S.CPC-AN.G.001


Test Results SummaryCisco Prime Collaboration Analytics

NilPassedGo to Analytics ->Technology Adoption andverify whether the user isable to validate Metrics forAudio Endpoints Deployedfor 3 months after upgradeCPCAnalytics from 10.6 to11.0 build

Validate Metricsfor AudioEndpointsDeployed for 3months afterupgrade 10.6 to11.0 build


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet-> CapacityAnalysis -> TrunkUtilization dashlet andverify whether the user isable to cross launch SIPTrunk Max CapacitySettings

Cross launch SIPTrunk MaxCapacity Settingsfrom newly addedTrunk Utilizationdashlet


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet-> CapacityAnalysis -> RouteGroup/Trunk GroupUtilization dashlet andverify whether the user isable to cross launch RouteGroupAggregation Settings

Cross launchRouteGroupAggregationSettings fromnewly added RouteGroup/TrunkGroup Utilizationdashlet


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet-> CapacityAnalysis -> RouteGroup/Trunk GroupUtilization dashlet andverify whether the user isable to cross launch CustomTrunk Group Management

Cross launchCustom TrunkGroupManagement fromnewly added RouteGroup/TrunkGroup Utilizationdashlet


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet-> CapacityAnalysis -> Busy-HourTrunk Capacity dashlet andverify whether the user isable to cross launch TrunkTraffic Max CapacitySettings

Cross launch TrunkTraffic MaxCapacity Settingsfrom newly addedBusy-Hour TrunkCapacity dashlet




NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet-> CapacityAnalysis -> Busy-HourRoute Group Capacitydashlet and verify whetherthe user is able to crosslaunch Trunk Traffic MaxCapacity Settings

Cross launch TrunkTraffic MaxCapacity Settingsfrom newly addedBusy-Hour RouteGroup Capacitydashlet


NilPassedGo to Analytics -> CustomReport Generator and verifywhether the user is able toexport data in InternetExplorer 10

Export data in IE10 for CustomReport Generator


NilPassedGo to Analytics -> CustomReport Generator and verifywhether the user is able toexport data in MozillaFirefox 38

Export data inMozilla Firefox 38for Custom ReportGenerator


NilPassedGo to Analytics ->Technology Adoption ->Deployment DistributionEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Chart mode

Configure SFTPSettings for ExportSchedule Report inDeploymentDistributionEndpoint Modeldashlet in Chartmode


NilPassedGo to Analytics ->Technology Adoption ->Call Distribution ByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Chart mode

Configure SFTPSettings for ExportSchedule Report inCall DistributionBy EndpointModel dashlet inChart mode


NilPassedGo to Analytics ->Technology Adoption ->Call Distribution ByEndpoint Types dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Chart mode

Configure SFTPSettings for ExportSchedule Report inCall DistributionBy Endpoint Typesdashlet in Chartmode




NilPassedGo to Analytics ->Technology Adoption ->Deployment DistributionEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Grid mode

Configure SFTPSettings for ExportSchedule Report inDeploymentDistributionEndpoint Modeldashlet in Gridmode


NilPassedGo to Analytics ->Technology Adoption ->Call Distribution ByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Grid mode

Configure SFTPSettings for ExportSchedule Report inCall DistributionBy EndpointModel dashlet inGrid mode


NilPassedGo to Analytics ->Technology Adoption ->Call Distribution ByEndpoint Types dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Grid mode

Configure SFTPSettings for ExportSchedule Report inCall DistributionBy Endpoint Typesdashlet in Gridmode


NilPassedGo to Analytics ->Technology Adoption ->Deployment DistributionEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Detailed View page

Configure SFTPSettings for ExportSchedule Report inDeploymentDistributionEndpoint Modeldashlet in DetailedView page


NilPassedGo to Analytics ->Technology Adoption ->Call Distribution ByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Detailed View page

Configure SFTPSettings for ExportSchedule Report inCall DistributionBy EndpointModel dashlet inDetailed Viewpage




NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->Technology Adoption ->DeploymentDistributionByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link forExport Schedule Report inChart mode

Configure SFTPSettings for ExportSchedule Report innewly addedDeploymentDistribution ByEndpoint Modeldashlet in Chartmode


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->Technology Adoption ->Call Distribution ByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link forExport Schedule Report inChart mode

Configure SFTPSettings for ExportSchedule Report innewly added CallDistribution ByEndpoint Modeldashlet in Chartmode


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->Technology Adoption ->Call Distribution ByEndpoint Types dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link forExport Schedule Report inChart mode

Configure SFTPSettings for ExportSchedule Report innewly added CallDistribution ByEndpoint Typesdashlet in Chartmode


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->Technology Adoption ->DeploymentDistributionByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link forExport Schedule Report inGrid mode

Configure SFTPSettings for ExportSchedule Report innewly addedDeploymentDistributionEndpoint Modeldashlet in Gridmode




NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->Technology Adoption ->Call Distribution ByEndpointModel dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link forExport Schedule Report inGrid mode

Configure SFTPSettings for ExportSchedule Report innewly added CallDistribution ByEndpoint Modeldashlet in Gridmode


NilPassedGo to Analytics -> LicenceUsage -> Contact CenterEnterprise and verifywhether the user is able toget Device data for Last 14Days

Checking Devicedata for Last 14days filter option inContact CenterEnterprise dashlet


NilPassedGo to Analytics -> UCSystem Performance andverify whether user is ableto view the added CiscoUnified CommunicationsManager in the Capabilitieslist and filter the data forlast 14 days

Check the addedUnified CM in theCapabilities listand filter the datafor last 14 days


NilPassedGo to Analytics ->Technology Adoption ->DeploymentDistributionByEndpointModel dashlet andverify whether the user isable to view MRA clientssuch as video endpoint datain Chart mode

Check MRAclients inDeploymentDistribution ByEndpoint Modeldashlet in Chartmode


NilPassedGo to Analytics -> AssetUsage -> Least UsedEndpoint Types dashlet andverify whether the user isable to view MRA clientssuch as Desktop Videoendpoint data in Chart mode

Check MRAclients in LeastUsed EndpointTypes dashlet inChart mode


NilPassedGo to Analytics->TechnologyAdoption andverify whether the user isable to view the correctMetrics for Video Callminutes after upgrade 10.6to 11.0 build in InternetExplorer 10 and 11

Compare Metricsfor Video Callminutes afterupgrade 10.6 to11.0 build inInternet Explorer10 and 11




NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->UCSystemPerformance -> CPUUtilization dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Detailed View page

Configure SFTPSettings for ExportSchedule Report inCPU Utilizationdashlet in DetailedView page


NilPassedGo to Analytics -> MyDashboard ->Settings->Add dashlet->UCSystemPerformance -> MemoryUtilization dashlet andverify whether the user isable to configure SFTPsettings from SFTP Link inthe Export Schedule Reportin Detailed View page

Configure SFTPSettings for ExportSchedule Report inMemoryUtilization dashletin Detailed Viewpage


NilPassedGo to Analytics -> CustomReport Generator and verifywhether the user is able toexport data in Chrome 44

Export data inChrome 44 forCustom ReportGenerator


Related DocumentationCisco Unified Communications Manager

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/11_0_1/CUCM_BK_R30921A8_00_CUCM_release-notes_1101.html

Upgrade Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/11_0_1/CUCM_BK_U97537E5_00_upgrade-guide-cucm_1101.pdf

Self-Care Portal User Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/useroptions/11_0_1/CUCM_BK_C1EE3BC1_00_uc-self-care-user-guide_1101.html

Cisco Unified Survivable Remote Site Telephony

Administration Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_roadmap.html


Test Results SummaryRelated Documentation









Cisco Unified IP Phone 6900 Series

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/6900_series/firmware/9-4-1SR2/Release_Notes/P690_BK_619CA545_00_6900-series-release_notes-941sr2.html#CUIP_TP_N882147A_00

Cisco Unified IP Phone 8900 Series

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8941_8945/firmware/9_4_2SR1/english/release_notes/P415_BK_RB1FD4B7_00_release-notes-942sr1.html

Cisco Jabber 11.0

Deployment and Installation Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_D657A25F_00_deployment-installation-guide-jabber-110.html

Planning Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_C04C09E7_00_cisco-jabber-110-planning-guide.pdf

Cisco TelePresence Video Communication Server

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-6.pdf

Mobile and Remote Access Deployment Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-6/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-6.pdf

Configuration Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-6/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-6.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/install_guide/Cisco-VCS-Virtual-Machine-Install-Guide-X8-6.pdf

Cisco TelePresence Management Suite


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-15.pdf

Release Notes:























http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-15.pdf

Cisco TelePresence MCU

Install and Upgrade Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/mcu_deployment_guide_4-5.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-72.pdf

Cisco TelePresence TX9000 Series

Release Notes:

http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/release/notes/tx_sw_6_0_release_notes.html


http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/admin/guide/tx_6_0_admin_guide.html

Installation Guide:

http://www.cisco.com/c/en/us/td/docs/telepresence/tx9000/assembly_guide/tx9000_9200_assembly_guide.html

Cisco TelePresence System EX series

EX 90 and EX 60 Administration Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc73.pdf

EX 90 Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/installation_guide/ex90_installation_sheet_for_web.pdf

EX 60 Installation Guide:


EX 90 and EX 60 User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/user-guide/ex60-ex90-user-guide-tc73.pdf

Cisco TelePresence TC Software

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf

Cisco TelePresence System Integrator Package C90










http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/release/notes/tx_sw_6_0_release_notes.html

http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/admin/guide/tx_6_0_admin_guide.html

http://www.cisco.com/c/en/us/td/docs/telepresence/tx9000/assembly_guide/tx9000_9200_assembly_guide.html











http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c90-and-codec-c90-administrator-guide-tc73.pdf

User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/getting-started-guide/video-systems-getting-started-guide-tc73.pdf

Cisco TelePresence Conductor


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-0.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC4-0.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC4-0.pdf

Cisco TelePresence Server

Configuration Guide:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/ts/deployment_guide/Cisco_TelePresence_Server_Deployment_Guide.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco_TelePresence_Server_7010_Installation_Guide.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-2-4-18.pdf

Cisco TelePresence Server on VM

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-1-2-29.pdf

Cisco DX70 and DX80

User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx70/user/1024/en/dx70-dx80-user-guide-1024.pdf


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1024/DX00_BK_C12F3FF5_00_cisco-dx-series-ag1024.pdf

Release Notes:

























http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/rel-notes/1024sr/DX00_BK_R548EF3A_00_release-notes-dx-series-1024sr.pdf

Cisco Prime Collaboration Provisioning


http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-0/Provisioning/install_upgrade/guide/Cisco_Prime_Collaboration_Provisioning_Install_and_Upgrade_Guide_11_0.pdf

Cisco Prime Collaboration Assurance and Analytics


http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-0/Assurance/Install_Upgrade/Guide/Cisco-Prime-Collaboration-Assurance-Install-Upgrade-Guide-11-0.pdf







