Tests list

Tests List Technology Lab

Contacto:Repsol Technology Lab

Calle Agustín de Betancourt s/n, 28935 Móstoles, [email protected]

-

Repsol Technology Lab / Soluciones Tecnológicas / Versión 1.0. / 2020.

Contact: Repsol Technology Lab

Calle Agustín de Betancourt

s/n, 28935 Móstoles, Madrid

[email protected]

Repsol Technology Lab / Test List / Version 1.0. / 2020.

mailto:[email protected]

Fluid and Formulation

4 Repsol Technology Lab – Tests List.

REPSOL TECHNOLOGY LAB REFERENCE

TYPE

OF TEST

DESCRIPTION METHOD/PROCESS

MOT006-1_PIN_VEE_EP LUBRICANT Pin & Vee Extreme Pressure (EP) method ASTM D2670

MOT006-2_PIN_VEE_DES LUBRICANT Pin & Vee wear method REPSOL INTERNAL METHOD

RYT001_4B_DESGASTE LUBRICANT 4 balls wear method ASTM D5183 Y ASTM

D4172

RYT002_4B_EP LUBRICANT 4 balls extreme pressure method ASTM D2783

RYT003_AGUA_SED_DM FUEL Water and Sediments DM ASTM D2709

RYT004_AGUA_SED_FO FUEL Water and Sediments FO ASTM D1796

RYT005_ALMC_GO FUEL Dupont diesel storage DUPONT METHOD

RYT006_ANTIHERRUMBRE FUEL Rust ASTM D 665

RYT007_ASPECTO FUEL Appearance ASTM D4176

RYT008_ATP_CELULAR FUEL Cellular ATP ASTM D7687

RYT009_AZUFRE_COR LUBRICANT Corrosive sulfur EN-62535

RYT010_AZ_COR_ASTM LUBRICANT Corrosive sulfur

ASTM D1275B

RYT011_BLEND_EUROLAB POLYMER Polymer blending and chemical modification by Eurolab extruder

REPSOL INTERNAL

METHOD

RYT013_BLEND_MINIEXT POLYMER Polymer blending and chemical modification by micro-extruder REPSOL INTERNAL

METHOD

RYT015_BRILLO POLYMER Brightness REPSOL INTERNAL

METHOD

RYT017_AMARILLEAMIEN POLYMER Adhesives characterization. Yellowing REPSOL INTERNAL

METHOD

RYT018_CIZALLA POLYMER Characterization of Adhesives. Shear test

REPSOL INTERNAL

METHOD

RYT019_PEEL POLYMER Characterization of Adhesives. Peel test on different substrates REPSOL INTERNAL

METHOD

RYT020_ADHES_TACK POLYMER Characterization of Adhesives. Tack REPSOL INTERNAL

METHOD

RYT021_C_D2140 SPECIALITIES Carbons ASTM D2140

RYT022_COLOR_D1500 LUBRICANT Colour ASTM D1500

RYT029_CONDUCTIVIDAD FUEL Conductivity ISO 6297

RYT031_CONTAM_TOTAL FUEL Total contamination UNE EN 12662

RYT034_CRYSTEX_LATEP POLYMER Crystex. Determination of the soluble content (amorphous

material) in a polyolefin

REPSOL INTERNAL

METHOD

RYT035_DEFORM_REMANT POLYMER Remnant deformation under tension at constant elongation

(EXT)

REPSOL INTERNAL METHOD

RYT036_DUR_ROCKWELL POLYMER Rockwell hardness REPSOL INTERNAL

METHOD

RYT037_DEF_REM_TENSI POLYMER Remnant deformation due to tension, elongation and creep under constant load.

REPSOL INTERNAL

METHOD

RYT038_DUREZA_SHORE POLYMER Shore hardness

REPSOL INTERNAL

METHOD

RYT039_DEMUL_D1401 LUBRICANT Demulsibility ASTM D1401

RYT040_DEMUL_D2711 LUBRICANT Demulsibility

ASTM D2711

RYT041_DENS_TEMP FUEL Density at temperature ASTM D4052




TYPE

OF TEST

DESCRIPTION METHOD / PROCESS

RYT042_DENSIDAD GENERIC Liquid sample density ASTM D4052

RYT043_DENS_BAL_HIDR GENERIC Density: Hydrostatic Balance REPSOL INTERNAL

METHOD

RYT044_DENS_COL_GRAD GENERIC Density: Gradient Column REPSOL INTERNAL

METHOD

RYT045_DESAIREACION LUBRICANT De-aeration ASTM D3427

RYT046_DESEMULSION FUEL De-emulsion ASTM D1094

RYT047_DETERGENCIA FUEL HLPS detergency

REPSOL INTERNAL

METHOD

RYT050_ESF_UHMWPE POLYMER Determination of elongation stress in UHMWPE

REPSOL INTERNAL

METHOD

RYT051_GR_RETIC_POLI POLYMER Crosslinking degree of a polymer

REPSOL INTERNAL

METHOD

RYT052_PM_UHMWNOGPC POLYMER Molecular weight of ultra-high molecular weight polyethylene not measurable by GPC

REPSOL INTERNAL

METHOD

RYT053_SH_MOD_TRAC POLYMER Strain Hardening Modulus (Gp) by Traction (80 ºC) REPSOL INTERNAL

METHOD

RYT054_DISPERSANCIA LUBRICANT Scattering REPSOL INTERNAL

METHOD

RYT056_DMA POLYMER DMA: Dynamo-mechanical properties REPSOL INTERNAL

METHOD

RYT059_EFIC_AUTORREP POLYMER Self-repair efficiency assessment REPSOL INTERNAL

METHOD

RYT060_ENSAYO_GEL FUEL Gel test REPSOL INTERNAL

METHOD

RYT061_ENVEJ_WOM POLYMER Aging in climatic chamber (WOM) REPSOL INTERNAL

METHOD

RYT062_ENVEJ_ESTUFA POLYMER Aging / Stove Cure REPSOL INTERNAL

METHOD

RYT063_ESCR POLYMER ESCR: Resistance to Stress Cracking REPSOL INTERNAL

METHOD

RYT064_ESPUMAS_AT_A LUBRICANT High temperature foam option A ASTM D6082

(METHOD A)

RYT065_ESPUMAS_AT_IV LUBRICANT High temperature foams, Sec. IV ASTM D6082

RYT068_RECHEM FUEL Rechem diesel foams MRECHEM METHOD

RYT069_ESPUMAS_LUB LUBRICANT Foams Sec. I, II, III ASTM D892

RYT070_ESPUMAS_OPCA LUBRICANT Foams Sec. I, II, III option A ASTM D892 (METHOD A)

RYT071_INY_BOSCH LUBRICANT Shear Stability (Bosch Injector) CEC L-14-93

RYT072_CIZ_KRL LUBRICANT Shear Stability (KRL) CEC L-45-99

RYT073_ESTABIL_LUZ FUEL Light stability REPSOL INTERNAL

METHOD

RYT074_ESTABIL_ADITI FUEL Additive stability REPSOL INTERNAL

METHOD

RYT075_EST_D2274 FUEL Stability ASTM D2274

RYT077_EST_TERMICA FUEL Thermal stability UOP 835 MODIFIED

RYT078_EST_UOP835 FUEL UOP 835 stability UOP 835

RYT079_FILM_RANDCAST POLYMER Cast-film extrusion (Randcastle) max 500 microns REPSOL INTERNAL

METHOD

RYT081_FBT FUEL FBT IP387

RYT082_FBT_COLD_SOAK FUEL FBT Cold soak IP387




TYPE

OF TEST


RYT083_FBT_SEVERO FUEL Severe FBT

IP387 MODIFIED

RYT084_F_AGUA_AFNOR LUBRICANT Water filterability (AFNOR) AFNOR NF E 48-690

RYT085_FILT_AGUA_ISO LUBRICANT Water filterability (ISO) ISO 13357-1

RYT087_F_SECO_AFNOR LUBRICANT Dry filterability (AFNOR) AFNOR NF E 48-691

RYT088_FILT_SECO_ISO LUBRICANT Dry filterability (ISO) ISO 13357-2

RYT089_FNCT POLYMER FNCT: Resistance to SCG in PE Resins (t <750 hours) REPSOL INTERNAL

METHOD

RYT090_F_ADHES_REACT POLYMER Adhesives formulation REPSOL INTERNAL METHOD

RYT091_FRAC_PRE_COMP POLYMER Preparative Fractionation by Composition REPSOL INTERNAL

METHOD

RYT092_HFRR LUBRICANT Friction and wear HFRR REPSOL INTERNAL METHOD

RYT096_GOMAS_D381 FUEL Current rubbers ASTM D381

RYT097_GOMAS_POTEN FUEL Potential rubbers ASTM D873

RYT098_HDT_FLEXION POLYMER HDT: Bending Temperature Under Load REPSOL INTERNAL

METHOD

RYT100_INDICE_CETANO FUEL Cetane number ASTM D4737

RYT101_IND_FLUIDEZ POLYMER Flow index REPSOL INTERNAL

METHOD

RYT102_IN_REFRACCION SPECIALITIES Refractive index ASTM D1747 ASTM D1747

RYT103_ISA FUEL Water separation index ASTM D3948

RYT104_IND_VISC LUBRICANT Viscosity index ASTM D2270

RYT105_INSOL_COLOR FUEL Insoluble in dyes REPSOL (PEC 1091)

RYT109_HFRR_COMB FUEL HFRR Lubricity CEC-F-06-A

RYT110_TMP_ABIER_ADH POLYMER Measurement of open time in adhesives REPSOL INTERNAL

METHOD

RYT112_MICROCOKING LUBRICANT Microcoking GFC LU-27-A-13

RYT113_MICROPITTING LUBRICANT Micropitting REPSOL INTERNAL METHOD

RYT114_MISCIBILIDAD LUBRICANT Miscibility and homogeneity ASTM D6922

RYT115_MOLDEO PRENSA POLYMER Compression Molding (Press) REPSOL INTERNAL METHOD

RYT116_MININYECTORA POLYMER Injection molding (mini-injector) REPSOL INTERNAL

METHOD

RYT117_MTM LUBRICANT MTM (Mini Traction Machine) REPSOL INTERNAL METHOD

RYT118_NCD FUEL Derived cetane number EN 15195

RYT119_OXIDACION_EP LUBRICANT Oxidation (EP oils) ASTM D2893

RYT120_OX_1000H LUBRICANT Oxidation 1000 h ASTM D431

RYT121_OX_CEC-48 LUBRICANT CEC L-48-00 oxidation (equipment A or B) up to 0.25 L CEC L-48-00

RYT122_OXID_DIELEC LUBRICANT Dielectric oxidation UNE-EN 61125C

RYT123_OXID_D2440 LUBRICANT Dielectric oxidation (American standard) ASTM D2440

RYT124_OXID_IP48 LUBRICANT IP48 oxidation IP48




TYPE

OF TEST


RYT125_OXID_ISOT LUBRICANT ISOT oxidation (FED-WL 761) JIS K 2514

RYT126_OXID_TFOUT LUBRICANT TFOUT oxidation ASTM D4742

RYT127_TOST LUBRICANT TOST oxidation ASTM D943

RYT128_OXID_USS LUBRICANT USS oxidation US STEEL 224

RYT129_OX_VW_DKA LUBRICANT VW DKA oxidation VW DKA PV 1443

RYT130_OXID_NITR_IR LUBRICANT Oxidation, nitration (IR) DIN 51 453

RYT133_PCA_IP346 SPECIALITIES PCA determination IP346

RYT137_P_DIELEC_D924 LUBRICANT Dielectric losses ASTM D924

RYT138_P_INDUCCION FUEL Induction period ASTM D525

RYT141_PETROOXY FUEL Petrooxy ASTM D7545

RYT143_POFF FUEL POFF EN116 UNE-EN-116

RYT144_PV_D5191 FUEL ASTM vapor pressure ASTM D5191

RYT146_PROP_FLEXION POLYMER Bending Properties REPSOL INTERNAL

METHOD

RYT147_PROP_TRACCION POLYMER Traction Properties REPSOL INTERNAL

METHOD

RYT148-1_COLORIMETR

RYT148-1_OPT_TGLV

POLYMER Optical properties (colorimetry / TGLV) REPSOL INTERNAL

METHOD

RYT149_PTO_ANILINA SPECIALITIES Aniline Point ASTM D611

RYT151_CRISTAL_AUTO FUEL Automatic crystallization point ASTM D7153

RYT153_PTO_HUMO FUEL Smoke point ASTM D-1322

RYT154_PTO_INFL_VA LUBRICANT Flash point v / a ASTM D92

RYT155_PTO_INFL_VC FUEL Flash point v / c ASTM D 93

RYT158_PTO_NIEBLA FUEL Fog point ASTM D 5771/ D2500

RYT159_P_VERTIDO_D97 FUEL Pour Point ASTM D97 ASTM D97

RYT160_VERTIDO_AUTOM LUBRICANT ASTM D5950 Automatic Pour Point ASTM D5950

RYT161_RANCIMAT FUEL Rancimat UNE-EN 15751 UNE EN 15751

RYT164_REL_ESF_COMPR POLYMER Compression stress relaxation REPSOL INTERNAL METHOD

RYT166-1_RL_DINÁMICA

RYT166-2_RL_ROTACIÓN

RYT166-4_RL_EVF

RYT166-6_RL_EA

RYT166-7_RL_MSTR.CRV

RYT166-8_RL_DALQUISH

POLYMER Rheology (dynamic, rotational, capillary)

Rheology (dynamic,

rotational, capillary, EVF,

fibers evaluation by Haul

off). Ares dynamic rheometer

that measures from

-30 ºC. local relaxations of

polymer chain, material

behavior under extreme

temperature conditions.

Large number of internal

methods to indirectly

measure, for example, the

melt resistance, the

activation energy of

transitions, Dalhquist

criterion for the

measurement of wettability

of a material at a given

temperature




TYPE

OF TEST


RYT167_AGRIET_OZONO POLYMER Ozone Cracking Resistance REPSOL INTERNAL METHOD

RYT169_CHARPY POLYMER Charpy impact resistance REPSOL INTERNAL METHOD

RYT170_IZOD POLYMER Izod impact resistance REPSOL INTERNAL METHOD

RYT171_RPVOT LUBRICANT RPVOT (rotary pump oxidation) ASTM D2272

RYT172_RPVOT_AMONIAC LUBRICANT RPVOT with ammonia ASTM D2272

RYT173_RPVOT_MOD LUBRICANT Modified RPVOT ASTM D2272

RYT176_SCAN_BROOKFIE LUBRICANT Scanning Brookfield ASTM D5133

RYT179_TANG_DELTA LUBRICANT Tangent delta UNE-EN 60247

RYT180_REBLAND_MET POLYMER Mettler Softening Temperature REPSOL INTERNAL METHOD

RYT183_T_INTERFASICA LUBRICANT Interphase voltage ASTM D1331/UNE 21320-6

RYT184_RUPTURA_D877 LUBRICANT Breakdown voltage 60 Hz: Disc electrodes ASTM D877

RYT185_RUPTURA_60156 LUBRICANT Dielectric breakdown voltage UNE EN 60156

RYT186_TEOST_33C LUBRICANT TEOST 33C (deposit test) ASTM D6335

RYT187_TEOST_MHT LUBRICANT TEOST MHT-4 (deposit test) ASTM D7097

RYT192_TREF_CRYSTAF POLYMER TREF / Crystaf. inter and intra-molecular comonomer

distribution in polyolefin


RYT193_VICAT POLYMER VICAT: VICAT Softening Temperature REPSOL INTERNAL METHOD

RYT195_VISC_100 LUBRICANT Viscosity at 100ºC ASTM D445




RYT201_VISC_BROOK_AT BITUMEN Brookfield Viscosity (High Temperature)

UNE 13302

RYT202_BROOKFIELD_BT LUBRICANT Brookfield Viscosity (low temperature) ASTM D2983

RYT203-1 VISC_BROOKFIELD GENERIC Brookfield Manual Viscosity


RYT203-2 VISC HAAKE GENERIC Haake Manual Viscosity

DIN 53019

RYT203-3_VISC_Ubbelohde GENERIC Ubbelohde / Ostwald viscosity and manual kinematic viscosity

at any T


RYT204_CCS LUBRICANT Viscosity CCS (Cold Cranking Simulator) ASTM D5293

RYT205_VISC_40_100 LUBRICANT Kinematic viscosity at 40 and 100ºC (automatic equipment) ASTM D445

RYT206_VISC_CINEM_BT LUBRICANT Kinematic viscosity at low temperature (0 to -40ºC) (manual

equipment)

ASTM D445

RYT209_VISC_HTHS LUBRICANT Viscosity HTHS (High Temperature High Shear)

CEC-L-36-90

RYT210_VISC_MRV LUBRICANT MRV Viscosity (Mini Rotary) ASTM D4684

RYT212_VOL_NOACK LUBRICANT Noack volatility CEC-L-40- 93

RYT213_LAMINOCULTIVO FUEL Lamino-cultivation microorganisms LAMINOCULTIVES



RYT217_CURV_VISC_5T LUBRICANT Brookfield Viscosity Curve REPSOL INTERNAL METHOD

RYT218_CP_PRESION LUBRICANT Heat Capacity (DSC) with Pressure in Mettler DSC REPSOL INTERNAL METHOD




TYPE

OF TEST


RYT220_P_INDUC_PDSC

LUBRICANT

Determination of oxidation induction time by differential scanning calorimetry at pressure

REPSOL INTERNAL

METHOD

RYT221_BLEND_HAAKE POLYMER Polymer blending and HAAKE internal chamber chemical modification

REPSOL INTERNAL

METHOD

RYT222_CORR_CU_D130 LUBRICANT Corrosion on Cu Sheet ASTM D130

RYT223_FORMULA05L FORMULATION Lubricant Formulation, fuel and fuel oils up to 0.5 L REPSOL INTERNAL

METHOD

RYT224_FORMULA5L FORMULATION Lubricant Formulation, fuel and fuel oils up to 5 L REPSOL INTERNAL

METHOD

RYT225_FORMULA25L FORMULATION Lubricant Formulation, fuel and fuel oils up to 25 L REPSOL INTERNAL

METHOD

RYT226_FORMULA100L FORMULATION Lubricant Formulation, fuel and fuel oils up to 100 L

REPSOL INTERNAL

METHOD

RYT227_FORMULA5000L FORMULATION Fuel Formulation up to 5000 L REPSOL INTERNAL

METHOD

RYT228_IMPRE3D_FDM POLYMER 3D printing by FDM REPSOL INTERNAL

METHOD

RYT229_IMPRES3D_SLS POLYMER 3D printing by SLS REPSOL INTERNAL

METHOD

RYT230_MOLIENDA POLYMER Grinding of polymer and polymeric compounds by milling Resch ZM100 and SM200

REPSOL INTERNAL

METHOD

RYT231_DISEÑO 3D POLYMER Design for 3D printing by Autocad REPSOL INTERNAL

METHOD

RYT232_FLUENCIA POLYMER Study of the creep of a varnish REPSOL INTERNAL

METHOD

RYT233_PURIF_EST_VAC GENERIC Vacuum oven purification REPSOL INTERNAL

METHOD

RYT237_DISP_DISPERMT GENERIC Dispersion in Dispermat

REPSOL INTERNAL

METHOD

RYT238_FILTRADO GENERIC Filtered out

REPSOL INTERNAL

METHOD

RYT239_TAMIZADO GENERIC Sieving REPSOL INTERNAL

METHOD

RYT241_CAST_FILM_ MINIEXT POLYMER Preparation of cast film by micro-extruder REPSOL INTERNAL

METHOD

RYT242_EST_PIROLITIC POLYMER Pyrolytic stove REPSOL INTERNAL

METHOD

RYT243_ROTAVAPOR GENERIC Rota-evaporation REPSOL INTERNAL

METHOD

RYT244_DENSIDAD_60 GENERIC Liquid samples density at 60 ºC REPSOL INTERNAL

METHOD

RYT245_ENSAYO_MANCHA MARINE FUEL OIL Determination of compatibility in fuels by spot test AASHTO T 102-83

RYT246 FORMULA.LUB 1000L

FORMULATION Lubricant Formulation up to 1000 L REPSOL INTERNAL

METHOD

RYT247_MICROINYECTORA POLYMER Injection molding (mini-injector) automatic equipment

REPSOL INTERNAL

METHOD

RYT248 OX_3L LUBRICANT CEC L-48-00 oxidation (equipment A or B) up to 0.25 L CEC L 48-00

RYT249TAB BITUMEN Ring-ball softening temperature EN-1427

RYT250PEN BITUMEN Determination of Needle Penetration in Bitumen EN-1426

CRO001_MGS_BX CHROMATOGRAPHY Determination of saturated mono-glyceride in biodiesel present in

diesel (BX)

REPSOL INTERNAL

METHOD




TYPE

OF TEST


CRO003_COLAS_POLIOL CHROMATOGRAPHY Calculation of high molecular weight tails in polyols

REPSOL INTERNAL

METHOD

CRO004_IDE_COMP_HPLC CHROMATOGRAPHY Analysis by Liquid Chromatography REPSOL INTERNAL

METHOD

CRO005_PIONA_DES_LIG CHROMATOGRAPHY Semi-quantitative PIONA analysis in light distillates by GC-MS (quadrupole)

REPSOL INTERNAL

METHOD

CRO006_PIONA_DES_ MED CHROMATOGRAPHY

Semi-quantitative PIONA analysis in middle distillates by GC x GC REPSOL INTERNAL

METHOD

CRO007_SAR_HPLC2 CHROMATOGRAPHY SAR analysis in heavy fractions (vacuum residues) by HPLC REPSOL INTERNAL

METHOD

CRO008_SIM_HT_7169 CHROMATOGRAPHY CG Simdist. Crude TBP curve HP 7890

CRO009_ESPECIA_N_NAF CHROMATOGRAPHY Speciation of nitrogenous compounds in light distillates REPSOL INTERNAL

METHOD

CRO010_REFORMULYZER CHROMATOGRAPHY CG-Refolmulyzer REPSOL INTERNAL

METHOD

CRO011_DET_GAS_REF CHROMATOGRAPHY CG-RGA-Refinery Gases VARIAN+HP

CRO012_PAR_ MOLECULAR CHROMATOGRAPHY

Molecular parameters by GPC. Polyols, RV, Additives and Polymer

REPSOL INTERNAL

METHOD

CRO013_MOL_PREP CHROMATOGRAPHY Preparative Size Exclusion Chromatography (GPC) REPSOL INTERNAL

METHOD

CRO014_GCFID_OPSM CHROMATOGRAPHY Chromatography for gases (GC) OPSM products REPSOL INTERNAL

METHOD

CRO015_HSGC_VOL_POLI CHROMATOGRAPHY Chromatography of Volatile Headspace Gases (HS-GC) in Polyols REPSOL INTERNAL

METHOD

CRO017_EFITEC_GNA CHROMATOGRAPHY Quantification of the EFITEC additive package in gasoline by GC-MS REPSOL INTERNAL

METHOD

CRO019_AROM_GO CHROMATOGRAPHY Determination of aromatics in middle distillates by HPLC REPSOL INTERNAL

METHOD

CRO020_BIOMARC_ CRUDO CHROMATOGRAPHY

Determination of biomarkers by GC-MS REPSOL INTERNAL

METHOD

CRO021_BTEX_DEST_LIG CHROMATOGRAPHY Determination of BTX in light distillates by GC-FID REPSOL INTERNAL

METHOD

CRO024_DM_GO CHROMATOGRAPHY Determination of metal deactivator in diesel or additive packages REPSOL INTERNAL

METHOD

CRO025_PESADOS_GNA CHROMATOGRAPHY Quantification of heavy components in gasoline by GC-FID REPSOL INTERNAL

METHOD

CRO026_SG_FAME CHROMATOGRAPHY Determination of sterol glycosides in FAME by GC-FID REPSOL INTERNAL

METHOD

CRO027_OXIGENADOS CHROMATOGRAPHY Determination of ETBE, TAME, TAEE, ETHANOL and TBA in refinery streams by GC-FID

REPSOL INTERNAL

METHOD

CRO028_FAME_14103 CHROMATOGRAPHY Determination of FAME in biodiesel by GC-FID EN-14103

CRO029_FAME_GO-BD CHROMATOGRAPHY Determination of FAME in diesel-biodiesel blends EN-14331

CRO030_FAME_ QUEROSEN CHROMATOGRAPHY

Determination of FAME in kerosene by GC-MS IP-585

CRO031_HPLC_OPSM

CHROMATOGRAPHY

Quantification of OPSM plant products (MBA, ACP, benzoic acid, benzene,

styrene, EB, EBHP, Phenol and Toluene) by HPLC

REPSOL INTERNAL

METHOD

CRO032_VOLAT_VDA_278 CHROMATOGRAPHY Determination of volatile organic compounds in Polymer according to VDA-

278 by DT-GC-MS VDA-278

CRO033_METOL_BIODIES CHROMATOGRAPHY Determination of methanol in biodiesel by headspace-GC-FID EN-14110

CRO034_GLICERI_14105 CHROMATOGRAPHY Determination of mono-, di- and triglycerides in biodiesel by GC-FID EN-14105




TYPE

OF TEST


CRO035_VERTIDOS CHROMATOGRAPHY Forensic analysis of hydrocarbon spills REPSOL INTERNAL

METHOD

CRO036_PAR_HC_C8-C40 CHROMATOGRAPHY Determination of n-paraffin (C10-C40) in hydrocarbons by GC-FID REPSOL INTERNAL

METHOD

CRO039_TRAZ_FAME_GO CHROMATOGRAPHY Determination of traces of FAME in middle distillates by GC x GC REPSOL INTERNAL

METHOD

CRO040_VOLAT_POLIMER CHROMATOGRAPHY Determination of volatile compounds by Thermal Desorption-GC-MS REPSOL INTERNAL

METHOD

CRO041_MGS_FAME CHROMATOGRAPHY Quantification of saturated mono-glyceride in FAME by GC-FID REPSOL INTERNAL

METHOD

CRO043_DHA_LIG_CRUD CHROMATOGRAPHY DHA. Crude Oil TBP curve HP 7890

CRO046_AZUFRADOS_NAF CHROMATOGRAPHY Speciation of sulfur compounds in light distillates REPSOL INTERNAL

METHOD

CRO047_ESPECIAC_S_GO CHROMATOGRAPHY

Speciation of sulfur compounds in middle distillates by GC x GC-SCD

REPSOL INTERNAL

METHOD

CRO048_METANOL_AGUA CHROMATOGRAPHY Quantification of methanol in water by GC-FID REPSOL INTERNAL

METHOD

CRO049_ESPECIAC_N_GO CHROMATOGRAPHY Speciation of nitrogen compounds in middle distillates by GC x GC-NCD REPSOL INTERNAL

METHOD

CRO050_IDEN_COM_GCMS CHROMATOGRAPHY Component identification by GC-MS REPSOL INTERNAL

METHOD

CRO055_FURFURAL_BASE CHROMATOGRAPHY Quantification of furfural on lubricant bases by HPLC REPSOL INTERNAL

METHOD

CRO056_GNA_GO CHROMATOGRAPHY Determination of gasoline in diesel by GC REPSOL INTERNAL

METHOD

CRO058_IDE_COMP_DTGC CHROMATOGRAPHY Determination of volatile compounds by thermal desorption and GC-MS REPSOL INTERNAL

METHOD

CRO061_AC_GRAS_MET CHROMATOGRAPHY Distribution of methylated fatty acids by GC REPSOL INTERNAL

METHOD

CRO063_AMINAS_LPG CHROMATOGRAPHY Determination of amines in LPG (Petroleum Liquid Gas) by GC-NCD REPSOL INTERNAL

METHOD

CRO064_ANTIOX_PE_PP CHROMATOGRAPHY Determination of antioxidants in polyolefin by HPLC REPSOL INTERNAL

METHOD

CRO070_RESI_LPG CHROMATOGRAPHY Qualitative or quantitative analysis of LPG (Petroleum Liquid Gas) residues by

GC-FID

REPSOL INTERNAL

METHOD

CRO072_CUANT_RES_LPG CHROMATOGRAPHY Quantification of LPG (Petroleum Liquid Gas) residues by GC-FID REPSOL INTERNAL

METHOD

CRO076_MOSHMOAHGCXGC CHROMATOGRAPHY Qualitative analysis MOSH-MOAH in polymer REPSOL INTERNAL

METHOD

CRO077_HCHO_POLIOL CHROMATOGRAPHY Quantification of Formaldehyde in Polyols REPSOL INTERNAL

METHOD

CR078_1_ASTM2887 CHROMATOGRAPHY Simulated Distillation ASTM D2887

CRO082_PIONA VGO CHROMATOGRAPHY PIONA (multidimensional gas chromatography) in VGO (Vacuum Gas Oil) REPSOL INTERNAL

METHOD

CRO083_SUST_BIO_GCMS CHROMATOGRAPHY Analysis of EBA functionalization substrates by GC-MS REPSOL INTERNAL

METHOD

CRO085_COMP_GNA_COMP

CHROMATOGRAPHY Determination of components in competition gasoline. ASTM D6730-01

CRO086_DILUC_GNA CHROMATOGRAPHY Gasoline dilution in lubricant oil by GC-FID ASTM-04(2016)

CRO089_ PM_SCB_GPC-IR CHROMATOGRAPHY Molecular Weight Distribution, molecular parameters and SCB (Short Chain

Branch) in High Temperature GPC-IR Equipment

REPSOL INTERNAL

METHOD

DES003_DEST_D86 DISTTILLATION Distillation ASTM D86




TYPE

OF TEST


PVT001-2_RAMP_DENVIS PVT

Density and Kinematic Viscosity and Converted Dynamic Viscosity in small Samples. Temperature ramp. ASTM D7042

PVT002_1_AWAI_WAX OIL RESERVOIR Live Oil Wax Appearance Temperature AT High Pressure REPSOL INTERNAL

METHOD

PVT002_2_AWAI_AOP OIL RESERVOIR Asphaltene Onset High Pressure REPSOL INTERNAL

METHOD

PVT003_HYDRATE OIL RESERVOIR Hydrate Cell Tests REPSOL INTERNAL

METHOD

PVT004_1_YS_ATM OIL RESERVOIR Yield Stress of crude oil at atmospheric pressure REPSOL INTERNAL

METHOD

PVT004_2_YS_HP OIL RESERVOIR Yield Stress of crude oil at high pressure REPSOL INTERNAL

METHOD

PVT004_3_CAR_REO OIL RESERVOIR

Fluid Rheology (Temperature/Shear Sweep) REPSOL INTERNAL

METHOD

PVT004_4_CAR_REO_HP OIL RESERVOIR High Pressure Rheology with Live Oil REPSOL INTERNAL

METHOD

PVT004_5_GOMAS OIL RESERVOIR Determination of gel in FA additive REPSOL INTERNAL

METHOD

PVT005_RECOMBINATION PVT Surface sample recombination REPSOL INTERNAL

METHOD

PVT005_2_QCHEK_RECOMB PVT Quality check of recombined fluid REPSOL INTERNAL

METHOD

PVT006_ HIGHRESOL_GC CHROMATOGRAPHY Liquid High Resolution GC fingerprint (whole oil / extracts) REPSOL INTERNAL

METHOD

PVT007_1_GASES_RGA CHROMATOGRAPHY Gas GC characterization (isotubes/isojars) REPSOL INTERNAL

METHOD

PVT007_2_GASES_C11 CHROMATOGRAPHY Flashed gas composition C11+ REPSOL INTERNAL

METHOD

PVT007_4_GASES_C11BTEX CHROMATOGRAPHY Flashed gas composition C11+ BTEX REPSOL INTERNAL

METHOD

PVT007_3_LIQ_C35 CHROMATOGRAPHY Composition of liquid C36+ REPSOL INTERNAL

METHOD

PVT007_5_LIQ_C35BTEX CHROMATOGRAPHY Flashed liquid composition to C36+ REPSOL INTERNAL

METHOD

PVT008_VISCO_HP_GAS OIL RESERVOIR High Pressure Viscosity for Gas or Oil Sample REPSOL INTERNAL

METHOD

PVT009_PESO_MOL PVT Molecular weight by cooling of Temperature REPSOL INTERNAL

METHOD

PVT010_1_PVT_CVD PVT Gas Condensate Constant Volume Depletion REPSOL INTERNAL

METHOD

PVT010_2_PVT_SF PVT Single Flash (GOR, API) REPSOL INTERNAL

METHOD

PVT010_3_PVT_CCE PVT Black Oil Constant Composition Expansion REPSOL INTERNAL

METHOD

PVT010_4_PVT_MST PVT Multi-Separation Test (MST) REPSOL INTERNAL

METHOD

PVT010_5_PVT_DL PVT Black Oil Differential Liberation REPSOL INTERNAL

METHOD

PVT010_6_PVT_CMD PVT Gas Condensate Constant Composition Expansion REPSOL INTERNAL

METHOD

PVT010_7_PVTSWELLING PVT Swelling Test REPSOL INTERNAL

METHOD

PVT010_8_PVT_SATSTEP PVT Determination of saturation pressure in Step Sample REPSOL INTERNAL

METHOD

PVT010_9_PVT_WELLSTR PVT Calculation of well stream composition REPSOL INTERNAL

METHOD




TYPE

OF TEST


PVT011_SAR GEOCHEMISTRY SAR Analysis (saturated, aromatic and resin/ polar) REPSOL INTERNAL

METHOD

PVT012_DSL OIL RESERVOIR Scale Flow Loop Test (Tube Blocking Test) REPSOL INTERNAL

METHOD

PVT014_OPENING PVT Opening Pressure of PVT bottles REPSOL INTERNAL

METHOD

PVT015_SF_RESTOR PVT Single phase samples restoration REPSOL INTERNAL

METHOD

PVT016_MF_RESTOR PVT Multiphase samples restoration REPSOL INTERNAL

METHOD

PVT017_MTBP_300CC DISTTILLATION STO Micro-distillation 5 cuts similar ASTM D-2892 with 300 cc REPSOL INTERNAL

METHOD

PVT018_MTBP_50CC DISTTILLATION STO Micro-distillation 3 cuts similar ASTM D-2892 with 50 cc REPSOL INTERNAL

METHOD

PVT019_AGUA_SINTET OIL RESERVOIR Synthetic water formulation REPSOL INTERNAL

METHOD

PVT020_DENS_HP PVT High pressure density REPSOL INTERNAL

METHOD

PVT022_SOLUBILITY OIL RESERVOIR Dispensability/Solubility water with Crude oil or hydrocarbon With Crude oil REPSOL INTERNAL

METHOD

PVT023_BSW_CENTRI PVT BS&W by Centrifuge REPSOL INTERNAL

METHOD

PVT024_BSW_KF PVT BS&W By Karl Fisher ASTM D4377

PVT025_COLDFINGER OIL RESERVOIR Cold Finger REPSOL INTERNAL

METHOD

PVT026_COLFINGERHP OIL RESERVOIR High Pressure Cold Finger REPSOL INTERNAL

METHOD

PVT028_TRANSFER PVT Sample transfer PVT Bottle REPSOL INTERNAL

METHOD

PVT029_STO_DEHY DISTTILLATION STO Dehydration REPSOL INTERNAL

METHOD

PVT030_OBM_STO PVT OBM Contamination Content REPSOL INTERNAL

METHOD

PVT031_ESTAB_CINET PVT Kinetics Stability of samples REPSOL INTERNAL

METHOD

PVT032_ESTAB_INDEX PVT Index Stability of samples ASTM D7061

PVT033_PWATCH PVT Multiface pipe determination REPSOL INTERNAL

METHOD

Rock and Catalysis


.


TYPE

OF TEST


RC001_PLUG_ADQ CORE_ANALYSIS Plug Sample Acquisition

INTERNAL METHOD

RC002_PLUG_PREP CORE_ANALYSIS Plug trimming, bagging and labelling

INTERNAL METHOD

RC003_SAMPLE_SOXH CORE_ANALYSIS Sample Cleaning and Fluid Extraction by Soxhlet

INTERNAL METHOD

RC004_DEAN_STARK CORE_ANALYSIS Fluid Extraction by Dean Stark

INTERNAL METHOD

RC005_ION_MILLING CORE_ANALYSIS Sample Ion Milling

INTERNAL METHOD

RC007_SAMPLE_SATU CORE_ANALYSIS Sample Saturation

INTERNAL METHOD

RC010_CONFOCAL_STUD MICROSCOPÍA Confocal Microscopy Study

INTERNAL METHOD

RC011_FLUID_PETROGRA CORE_ANALYSIS Fluid Inclusions Petrography

INTERNAL METHOD

RC012_FLUID_MICROTHE CORE_ANALYSIS Fluid Inclusions Microthermometry

INTERNAL METHOD

RC013_FLUID_INCLUS CORE_ANALYSIS Fluid Inclusions UV Fluorescence Spectrometry

INTERNAL METHOD

RC014_CORE_FTIR_LOG

CORE_ANALYSIS

Full Core High Resolution Qualitative Composition FTIR Log

INTERNAL METHOD

RC017_SEM_EDS CORE_ANALYSIS FAST SEM-EDS (Scanning Electron Microscopy and Energy

Dispersive X-Ray Spectroscopy)

INTERNAL METHOD

RC019_DATA_CLUSTER CORE_ANALYSIS Subsurface and Laboratory Data Clustering Analysis and

pseudoproperties estimation (per sample)

INTERNAL METHOD

RC020_THS_STUDY CORE_ANALYSIS Thin Section Cathodoluminescence Petrographical Study

INTERNAL METHOD

RC021_THS_PETRO_DESC CORE_ANALYSIS Thin Section Petrographical Description

INTERNAL METHOD

RC022_THS_POINT_COUN CORE_ANALYSIS Thin Section Petrography by Point Counting

INTERNAL METHOD

RC023_THS_SCAN CORE_ANALYSIS Thin Section Scanning

INTERNAL METHOD

RC024_BRAZILIAN_TEST ROCK_MECHANICS Brazilian Test or Indirect Tension Test

INTERNAL METHOD

RC025_CORE_HR_VP-VS ROCK_MECHANICS Full Core High Resolution Elastic Velocities (Vp-Vs) Log (per

meter)

INTERNAL METHOD

RC026_CORE_HR_YOUNG ROCK_MECHANICS Full Core High Resolution Reduced Young Modulus Log (per

meter)

INTERNAL METHOD

RC027_CORE_HR_UCS ROCK_MECHANICS High Resolution Strength (UCS) Log (per meter)

INTERNAL METHOD

RC028_HYD_COMP_TEST ROCK_MECHANICS Hydrostatic Compression Test

INTERNAL METHOD

RC029_ME_TRIAX_TEST ROCK_MECHANICS Multistage Triaxial Test

INTERNAL METHOD

RC030_TRIAXIAL_TEST ROCK_MECHANICS Triaxial Test_LVDT

INTERNAL METHOD

RC031_UCS_TEST ROCK_MECHANICS Unconfined Compressive Strength (UCS) Test_LVDT

INTERNAL METHOD

RC032_ULTRASONIC_PRO ROCK_MECHANICS Ultrasonic Velocities and Dynamic Elastic Properties

INTERNAL METHOD

RC033_1D_NMR_PROF CORE_ANALYSIS 1D Saturation Profile by Nuclear Magnetic Resonance

INTERNAL METHOD

RC034_CAP_CURV_ PPLAT CORE_ANALYSIS

Capillary Pressure Curve Measurement by Porous Plate INTERNAL METHOD

RC035_CAP_CURV_ CENTR CORE_ANALYSIS

Capillary Pressure Curve Measurement by Ultracentrifuge INTERNAL METHOD

Rock and Catalysis


.

.


TYPE

OF TEST


RC036_SAT_EST_NMR_T2 CORE_ANALYSIS Dual Saturation State by Nuclear Magnetic Resonance (T2-

cutoff)

INTERNAL METHOD

RC037_SATEST_NMR_T2 CORE_ANALYSIS Dual Saturation State by Nuclear Magnetic Resonance (T2-

cutoff) at High Pressure and Temperature INTERNAL METHOD

RC038_FRF_AMBIENT CORE_ANALYSIS Formation Factor (FRF) at Ambient Conditions INTERNAL METHOD

RC039_FRF_HPT CORE_ANALYSIS Formation Factor (FRF) at High Pressure and Temperature INTERNAL METHOD

RC040_FC_HR_MPERM CORE_ANALYSIS Full Core High Resolution Permeability Log (Miniperm) (per

meter) INTERNAL METHOD

RC041_FC_PERMEABILIT CORE_ANALYSIS Permeability Measurement in Full Core Sample INTERNAL METHOD

RC042_POR_PERM CORE_ANALYSIS Porosity and Permeability Measurement INTERNAL METHOD

RC043_POR_PERM_NOP CORE_ANALYSIS Porosity and Permeability Measurement at Net Overburden

Pressure (NOP)_5 pressure points INTERNAL METHOD

RC044_POROSITY_NMR CORE_ANALYSIS Porosity and Pore Size Distribution Curve by Nuclear Magnetic

Resonance (T1-T2) INTERNAL METHOD

RC045_PORO_NMR_HPT CORE_ANALYSIS Porosity and Pore Size Distribution Curve by Nuclear Magnetic

Resonance (T1-T2) at High Pressure and Temperature INTERNAL METHOD

RC046_RESIST_IND_HPT CORE_ANALYSIS Resistivity Index by Porous Plate at High Pressure and

Temperature INTERNAL METHOD

RC047_IRR_WAT_CENT CORE_ANALYSIS Sample Conditioning to Irreducible Water Saturation State by

Ultracentrifuge INTERNAL METHOD

RC048_WETT_AMMOT CORE_ANALYSIS Wettability Indexes Measurement by Ammot-USBM Method INTERNAL METHOD

RC049_WETT_USBM CORE_ANALYSIS Wettability Indexes Measurement by Ultracentrifuge (USBM

Standard) INTERNAL METHOD

RC050_2D_IMAG-PROC CORE_ANALYSIS 2D Image Processing and Morphometric Analysis INTERNAL METHOD

RC051_2D_NANO_FIB_SE CORE_ANALYSIS 2D Nanoscale Image Mapping by FIB-SEM (1000-3500

Megapixels) INTERNAL METHOD

RC052_3D_IMAG-PROC CORE_ANALYSIS 3D Image Processing and Morphometric Analysis INTERNAL METHOD

RC053_3D_NANO_FIB_SE CORE_ANALYSIS 3D Nanoscale Image Acquisition by FIB-SEM INTERNAL METHOD

RC054_HR_MICRO_CT CORE_ANALYSIS High resolution X-Ray Micro Computed Tomography (HR Micro

CT) INTERNAL METHOD

RC055_MICROCT_WUTEST CORE_ANALYSIS High resolution X-Ray Micro Computed Tomography (HR Micro

CT) while Uniaxial Testing INTERNAL METHOD

RC056_QEMSCAN_ MAPPIN CORE_ANALYSIS Reservoir Properties Digital Simulation INTERNAL METHOD

RC057_RESERV_DIG_SIM CORE_ANALYSIS Scanning Acoustic Microscopy (SAM) INTERNAL METHOD

RC058_SAM CORE_ANALYSIS X-Ray Micro Radiography Screening (2D) INTERNAL METHOD

RC059_XR_MCT_SCR_2D CORE_ANALYSIS X-Ray Micro Computed Tomography (Micro CT) INTERNAL METHOD

RC060_XR_MICRO_CT CORE_ANALYSIS Dual Saturation State by Nuclear Magnetic Resonance (T2-

cutoff)

INTERNAL METHOD

Rock and Catalysis


.


TYPE

OF TEST


RC079_CONT_ANGLE CORE_ANALYSIS Static/Dynamic Contact Angle Measurement AMB COND

INTERNAL METHOD

RC080_FREE_ENERGY CORE_ANALYSIS Surface Free Energy Determination by Contac Angle AMB COND

INTERNAL METHOD

RC081_CORE_AGING CORE_ANALYSIS Wettability Restoration (Core Aging)

INTERNAL METHOD

RC082_ADHES_ CONTANGL

CORE_ANALYSIS Work of Adhesion Measurement by Contact Angle AMB COND

INTERNAL METHOD

RC083_QEM_MAP_ TS_30M

CORE_ANALYSIS MINERAL QEMSCAN MAPPING THIN SECTIONS 30 MICRON RESOLUTION

(1cm2)

INTERNAL METHOD

RC084_QEM_MAP_ TS_10M

CORE_ANALYSIS MINERAL QEMSCAN MAPPING THIN SECTIONS 10 MICRON RESOLUTION

(1cm2)

INTERNAL METHOD

RC085_ABS_BRINE_ PERM

CORE_ANALYSIS Absolute brine permeability

INTERNAL METHOD

RC086_REL_ PERMEABILI

CORE_ANALYSIS Relative permeability (Unsteady-state) (water-oil and oil-water)

INTERNAL METHOD

RC087_CORE_FLOODING CORE_ANALYSIS Core Flooding

INTERNAL METHOD

RC089_CT_SCAN_ TOMOGR

CORE_ANALYSIS CT SCAN (X RAY COMPUTED TOMOGRAPHY)

INTERNAL METHOD

RC090_XR_MCT_ MULTI_2D

CORE_ANALYSIS X-Ray Micro Radiography Screening Multi Energy (2D)

INTERNAL METHOD

MIC001_DRX_FCRISTALI MICROSCOPY Crystalline phases analysis in the sample by X-Ray Diffraction.

INTERNAL METHOD

MIC002_DRX_CAPILAR_S MICROSCOPY Analysis of air and humidity sensitive samples in capillary by X-Ray Diffraction.

INTERNAL METHOD

MIC004_DRX_RIETVELD MICROSCOPY Semiquantitative analysis of crystalline phases by X-Ray Diffraction (Rietveld)

INTERNAL METHOD

MIC005_SEM_EDS_ MULTIP

MICROSCOPY Semiquantitative analysis of a conventional sample by SEM-EDS (multipoint)

INTERNAL METHOD

MIC009_ANA_IMAG MICROSCOPY Size and morphology determination of particles by image analysis

INTERNAL METHOD

MIC011_DRX_ CAPILAR_N

MICROSCOPY X-Ray Diffraction in standard capillary INTERNAL METHOD

MIC012_DRX_ OPREFEREN

MICROSCOPY X Ray Diffraction in special samples with preferred orientation in sample holders with lateral load

INTERNAL METHOD

MIC013_MO_REFLEXION MICROSCOPY Conventional sample study by reflected light microscopy

INTERNAL METHOD

MIC014_MO_ TRANSMISIO

MICROSCOPY Conventional sample study by transmission light Microscopy.

INTERNAL METHOD

MIC015_3D_ PERFILOMET

MICROSCOPY 3D confocal microscopy (profilometry) INTERNAL METHOD

MIC016_CLSM MICROSCOPY Non defining method of Laser Scanning Confocal Microscopy INTERNAL METHOD

MIC017_SEM_MAPPINGCO MICROSCOPY Mapping of elemental distribution with sample preparation

INTERNAL METHOD

MIC018_SEM_ MAPPSINPR

MICROSCOPY Mapping of elemental distribution without sample preparation

INTERNAL METHOD

MIC021_SEM_COM_ PREP

MICROSCOPY Sample observation by conventional scanning electron Microscopy (SEM), with sample preparation

INTERNAL METHOD

MIC023_SEM_CATODO MICROSCOPY Cathodoluminescence images by SEM INTERNAL METHOD

Rock and Catalysis


.

.


TYPE

OF TEST


MIC024_SEM_CAT_CPREP MICROSCOPY Cathodoluminescence images by SEM with sample preparation.

INTERNAL METHOD

MIC025_DRX_ARCILLAS MICROSCOPY Clay identification by XRD INTERNAL METHOD

MIC028_CELDA UNIDAD ZEOLITAS

MICROSCOPY Unit Cell parameter CAT. FCC INTERNAL METHOD

CAT001_VOL_PORO_N2 CATALYSIS Nitrogen adsorption-desorption Isotherm INTERNAL METHOD

"CAT002-1_BET

CAT002-2_Área_ZE_MAT" CATALYSIS

BET Surface Area INTERNAL METHOD

"CAT003-1_TT_HUM_110 CAT003-2_IGN_1000_1H CAT003-3_IGN_480_1H CAT003-4_IGN_CATFCC CAT003-5_IGN_485_2H CAT003-6_IGN_900_2H CAT003-7_TT_110_16H CAT003-8_TT_320_6H CAT003-9_TT_425_6H"

CATALYSIS Heat Treatment

"CAT004-1_ATRIC_FCC CAT004-2_ATR_ATRIC_FCC"

CATALYSIS Jet Cup Attrition test (FCC Catalyst) INTERNAL METHOD

CAT005_ABRAS_ATRIC CATALYSIS Attrition test - Rotating tube INTERNAL METHOD

CAT006_CAP_CAT_RESIN CATALYSIS Total exchange capacity (Resins) INTERNAL METHOD

"CAT007-1_DEN_APAR_TAP CAT007-2_DEN_AP_FCC CAT007-3_DEN_AP_COQ"

CATALYSIS Apparent / Tapped Density

INTERNAL METHOD

CAT008_DENS_REAL CATALYSIS True density (Helium Pycnometry)

INTERNAL METHOD

CAT009_DES_CAT_HDT CATALYSIS Hydrotreating catalyst preparation

INTERNAL METHOD

"CAT010-1_TPD_NH3 CAT010-2_TPD_HE"

CATALYSIS Ammonia Temperature-programmed desorption (TPD) INTERNAL METHOD

CAT011_PARA_CU_ZEOLI CATALYSIS Unit Cell parameter CAT. FCC INTERNAL METHOD

"CAT012-1_PART_CAMSIZ CAT012-2_PART_CAMSIZ CAT012-3_PART_CAMSIZ CAT012-4_PART_CAMSIZ"

CATALYSIS

Particle Size Distribution (Image Analysis)

INTERNAL METHOD

"CAT013-1_PART_LASER CAT013-2_PART_LASER CAT013-3_PART_LASER CAT013-4_PART_LASER"

CATALYSIS

Particle Size Distribution (Laser Diffraction)

INTERNAL METHOD

CAT014_SOXHLET CATALYSIS Soxhlet Extraction INTERNAL METHOD

CAT015_FINOS_DO CATALYSIS Filtration and quantification of particles in liquids INTERNAL METHOD

CAT016_TPO CATALYSIS Temperature Programmed Oxidation INTERNAL METHOD

"CAT017-1_POROSIMETRI CAT017-2_DENS_PARTIC" CATALYSIS Mercury porosimetry

INTERNAL METHOD

CAT023_VOL_PORO_AGUA CATALYSIS Pore Volume (Water Saturation) INTERNAL METHOD

"CAT024-1_PREP_CATALI CAT024-2_PREP_CATALI CAT024-3_PREP_CATALI CAT024-4_PREP_CATALI CAT024-5_PREP_CATALI"

CATALYSIS

Catalyst Preparation (Ball milling) INTERNAL METHOD

Rock and Catalysis


.

.


TYPE

OF TEST


CAT025-1_PRES_ROTURA CAT025-2_PRES_ROTURA

CATALYSIS Crush Strength Test INTERNAL METHOD

CAT026-1_QUIMISOR_CO CAT026-2_QUIMISOR_H2 CAT026-3_QUIMI_H2-O2 CAT026-4_QUIMISOR_O2

CATALYSIS

Chemisorption INTERNAL METHOD

CAT027_REAC_CAT_HC CATALYSIS Hydrocracking catalyst preparation

INTERNAL METHOD

CAT028-1_TPR

CAT028-2_TPR_MASAS CATALYSIS

Temperature programmed reduction (TPR) INTERNAL METHOD

CAT029_VOL_POR_N2_EXT CATALYSIS Nitrogen adsorption-desorption Isotherm INTERNAL METHOD

CAT030_BET_N2_EXT CATALYSIS BET Surface Area INTERNAL METHOD

CAT031_ZE_MAT_EXT CATALYSIS Nitrogen adsorption-desorption Isotherm (FCC Catalyst) INTERNAL METHOD

CAT032_V_POR_HG_EXT CATALYSIS Mercury Porosimetry INTERNAL METHOD

RC091_2D_FAST_IMA_PRO CORE_ANALYSIS 2D FAST Image Processing and Morphometric Analysis INTERNAL METHOD

Industrial



TYPE

OF TEST


MOT001_DUREZ_BRINELL ENGINE Brinell hardness INTERNAL METHOD

MOT002_DUR_ROCKWELL ENGINE Rockwell hardness INTERNAL METHOD

MOT003_DUR_VICKERS ENGINE Vickers hardness INTERNAL METHOD

MOT004_ADITIV_MOTOR ENGINE Evaluation of gasoline additives in motor GDI VW 1,2 TSI INTERNAL METHOD

MOT005_EVAL_LUB_VEHI ENGINE Lubricant evaluation in vehicle (Dyno chasis) INTERNAL METHOD

MOT007-1_RON MOT007-2_MON

ENGINE

Octane determination in CFR engine RON: ASTM D2699; MON: ASTM D2700

MOT008_PART_D1319 ENGINE Pollutant particles ASTM D1319

MOT009_CONSUM_EMISI

ENGINE

Fuel consumption and vehicle emissions test (HC, CO, NOx, CO2 , PM y PN) on dyno chasis

NEDC, WLTC

MOT010_TRACING_SYST ENGINE Análisis perfilométrico (Tracing system)

MOT011_Ensayo carga DPF ENGINE DPF load test NEDC, WLTC

MOT012_Ensayo NEDC o WLTC (sin bolsas de dilución) ENGINE

NEDC or WLTC test (no dilution bags) INTERNAL METHOD

MOT013_Evaluación lubricante en vehículo (banco de rodillos) ENGINE

Vehicle lubricant test (Dyno chasis) INTERNAL METHOD

MOT014_Evaluación combustible en vehículo (banco de rodillos) ENGINE

Vehicle fuel test (Dyno chasis) INTERNAL METHOD

MOT015_Ensayo de larga duración (15.000 km) ENGINE Long-term test on dyno chasis (15.000 km) INTERNAL METHOD

MOT016_Ensayo de larga duración (160.000 km) ENGINE

Long-term test on dyno chasis (160.000 km) INTERNAL METHOD

MOT017_Ensayo de duración de aceite de competición para motos ENGINE Life test of competition oil for motorcycles INTERNAL METHOD

MOT018_Ensayo prestaciones de aceite de competición para motos ENGINE Performance test of competition oil for motorcycles INTERNAL METHOD

MOT019_Ensayo prestaciones

de gasolina de competición para motos

ENGINE

Performance test of competition gasoline for motorcycles

INTERNAL METHOD

MOT020_Ensayo de prestaciones de un aceite comercial en motor Scooter

ENGINE

Performance test of a commercial oil in Scooter engine

INTERNAL METHOD

MOT021_Ensayo de duración de un aceite comercial en motor Scooter

ENGINE

Life test of a commercial oil in Scooter engine

INTERNAL METHOD

MOT022_Evaluación aditivos gasolina en motor (Keep Clean) ENGINE

Evaluation of gasoline additives in engine (Keep Clean) INTERNAL METHOD

MOT023_Evaluación aditivos gasolina en motor (Clean Up) ENGINE

Evaluation of gasoline additives in engine (Clean Up) INTERNAL METHOD

MOT024_Evaluación Aditivos Diésel ENGINE

Diesel additive evaluation INTERNAL METHOD

Ensayo del ensuciamiento de inyectores en motor Diésel pesado

ENGINE Injector fouling test in heavy diesel engine

INTERNAL METHOD


ENGINE

RON determination in CFR engine RON: ASTM D2699; MON: ASTM D2700

Industrial


.


TYPE

OF TEST



ENGINE MON determination in CFR engine RON: ASTM D2699; MON: ASTM D2700

MOT024_Comprobación de Inyectores

ENGINE Injectors check INTERNAL METHOD

DES000_DENSIDAD_PP DISTILLATION Determination of density and relative density of liquids ASTM D4052

DES001_AG_DEST_D4006 DISTILLATION Water by distillation ASTM D4006

DES002_DEST_D1160 DISTILLATION Distillation ASTM D-1160 ASTM D1160

DES004_TBP_CRUD_EFL DISTILLATION Crude TBP curve distillation (15 L) ASTM D2892

DES005_DES_POT_STILL DISTILLATION Distillation Pot Still ASTM D5236

DES007_DESHID_CRUDOS DISTILLATION Crude dehydration INTERNAL METHOD

DES008_CAP_FIN DISTILLATION Thin layer distillation INTERNAL METHOD

DES009_TBP_EFL DISTILLATION Distillation curve TBP of effluents conversion ASTM D2892

Analytics and Biotechnology

21 Repsol Technology Lab - Tests List.

.


TYPE

OF TEST


AE005_IR_MICROSCOPIA IR IR spectrum acquisition by IR microscopy INTERNAL METHOD

AE007_RMN_2D NMR Two-dimensional NMR spectrum acquisition INTERNAL METHOD

AE011_UV IR UV-visible spectrum acquisition INTERNAL METHOD

AE012_RMN_13C NMR Acquisition of Carbon NMR spectrum (13C) INTERNAL METHOD

AE014_RMN_1H NMR Acquisition of Proton NMR spectrum (1H) INTERNAL METHOD

AE015_RMN_31P NMR Acquisition of Phosphorus NMR spectrum (31P) INTERNAL METHOD

AE016_IR_GC IR Analysis by Gas Chromatography coupled to IR INTERNAL METHOD

AE017_IR_TGA IR Thermogravimetric analysis (TGA) coupled to infrared spectrometer (TGA-IR)

INTERNAL METHOD

AE018_RMN_EBA NMR EBA polymer analysis by NMR INTERNAL METHOD

AE019_IR_SEP_FLASH IR Component separation by flash chromatography INTERNAL METHOD

AE020_UV_ASFALTENOS IR Asphaltenes analysis by standar IFP 9313 IFP 9313

AE025_RMN_POLIOL_GLI NMR Determination of the structure of glycerin-initiated polyols by NMR

INTERNAL METHOD

AE032_IR_ADITIVOS IR Structural identification of additives by IR INTERNAL METHOD

AE034_RMN_INS_FUMAR NMR Determination of fumaric unsaturations in polymeric polyols by NMR

INTERNAL METHOD

AE035_RMN_EST_POLSAN NMR Microstructure determination of polymeric polyols by NMR

INTERNAL METHOD

AE041_RMN_TRIADAS NMR Triad sequence determination of copolymers by NMR INTERNAL METHOD

AE044_IR_FAME IR Determination of FAME in diesel by IR UNE-14078

AE045_IR_INSATURACIO IR Determination of unsaturations by IR INTERNAL METHOD

AE046_IR_BRANDES IR Determination of the distribution of carbon atoms in oils (Brandes method)

ISA-E-11.00

AE047_RMN_AV_EVA NMR Microstructure determination of EVA copolymers by NMR

INTERNAL METHOD

AE050_RMN_EST_POLIOL NMR Microstructure determination of flexible polyols by NMR

INTERNAL METHOD

AE051_RMN_DISTR_PROT NMR Determination of the different types of hydrogen and carbons in a sample by 1H-NMR

INTERNAL METHOD

AE052_IR_MO_D7066 IR Determination of organic matter in water by IR (D7066) ASTM D7066

AE053_IR_MO_D7678 IR Determination of organic matter in water by IR (D7678) ASTM D7678

AE054_RMN_EST_CAUCHO NMR Microstructure determination of rubber by RMN INTERNAL METHOD

AE055_IR_PCA IR Determination of polycyclic aromatic hydrocarbons (PCAs) by IR INTERNAL METHOD

AE060_IR_IOH_POLIOL IR Determinación del índice de hidroxilo en polioles por IR INTERNAL METHOD

AE061_RMN_ AROMATICIDAD NMR

Determination of the hydroxyl number in polyols by IR INTERNAL METHOD

AE064_IR_MICRO_RAMAN IR Analysis of functional groups distribution by Raman microscopy INTERNAL METHOD

AE065_MASAS

MASAS

Semi-quantitative analysis of the hydrocarbon composition of middle distillates by mass spectrometry (Fisher method)

INTERNAL METHOD

AE068_RMN_ADITIVOS NMR Identification of additives by NMR INTERNAL METHOD


Biotecnología



TYPE

OF TEST


AE069_RMN_COMP NMR Identification of components of a sample by NMR INTERNAL METHOD

AE070_IR_IDE_RAMAN IR Component identification by Raman spectroscopy INTERNAL METHOD

AE071_IR_IDE_COMP IR Identificación de componentes por IR INTERNAL METHOD

AE077_RMN_ISOCIANATO NMR Determination of 1H_13C isocyanates INTERNAL METHOD

AE079_IR IR IR spectrum acquisition INTERNAL METHOD

AE081_RMN_DIFUSIÓN NMR One-dimensional (DOSY-1D) and / or two-dimensional (DOSY-2D) diffusion NMR spectrum acquisition

INTERNAL METHOD

AE082_RMN_MAA NMR Determination of methacrylic acid in polyolefins INTERNAL METHOD

AE083_RMN_POLIOLEFINA NMR Microstructure determination of polyolefins by NMR INTERNAL METHOD

AQ105_SILICIO_UA STRUCTURAL ANALYSIS Determination of Si in gasoline by Inductively coupled plasma (ICP) INTERNAL METHOD

AQ153_REAC_AVANZADA CHEMICAL ANALYSIS Scale up process in reactor INTERNAL METHOD

AQ058_OXIGENO_ELEMEN STRUCTURAL ANALYSIS Total oxygen quantification INTERNAL METHOD

BIO044_FERMENTADORES BIOTECHNOLOGY Fermentation processes up to 20 L

INTERNAL METHOD

BIO046_BIOLECTOR

BIOTECHNOLOGY

Microfermentation processes in Biolector INTERNAL METHOD

AQ098_UOP_407 STRUCTURAL ANALYSIS Determination of metals in hydrocarbons according to the UOP-407 method

UOP-407

AQ019_DELTA_OXIGENO STRUCTURAL ANALYSIS Determination of stable oxygen isotopes by (Isotope-Ratio Mass

Spectrometry (IRMS)

INTERNAL METHOD

AQ014_AMONIO_CI STRUCTURAL ANALYSIS Quantification of ammonia in aqueous samples by ion chromatographyCuantificación de amonio en muestras acuosas por cromatografía iónica

INTERNAL METHOD

AQ107_DSC_CALOR_ESP ANÁLISIS TÉRMICO Determination of the specific heat of a substance using DSC

INTERNAL METHOD

BIO012_WESTERN_BLOT BIOTECHNOLOGY Western blot INTERNAL METHOD

BIO013_LIG_PLASMIDOS BIOTECHNOLOGY Plasmid digestion and ligation INTERNAL METHOD

AQ051_AMINAS_CI STRUCTURAL ANALYSIS Quantification of amines in aqueous samples by ion chromatography

INTERNAL METHOD

AQ040_YODO_AGUA_CI STRUCTURAL ANALYSIS Quantification of iodide in aqueous samples INTERNAL METHOD

AQ042_CL_ORG_INORG STRUCTURAL ANALYSIS Determination of the organic and inorganic chlorine content INTERNAL METHOD

AQ079_PERLA_FCC STRUCTURAL ANALYSIS Determination of Aluminum and Silicon in FCC catalysts by FRX

INTERNAL METHOD

AQ038_P_INDUC_PDSC LUBRICANTES PDSC induction period INTERNAL METHOD

AQ147_CSIA STRUCTURAL ANALYSIS Determination of stable isotopes by GC-IRMS INTERNAL METHOD

AQ155_ULTRAWAVE STRUCTURAL ANALYSIS Digestion of samples from different matrices using Ultrawave (Closed

vessel digestion) INTERNAL METHOD

AQ156_FUSION STRUCTURAL ANALYSIS

Digestion of samples from different matrices by fusion ASTM D5184




TYPE

OF TEST


AQ072_TDS_TSS_5907 CHEMICAL ANALYSIS Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

ASTM D5907

AQ008_CENIZAS_ SULFAT CHEMICAL ANALYSIS Sulphated ash ASTM D874

AQ136_P_ULTRAWAVE STRUCTURAL ANALYSIS Determination of phosphorus in hydrocarbons by digestion INTERNAL METHOD

AQ025_ANIONES_SOL_ AC STRUCTURAL ANALYSIS

Quantification of anions (NO3, NO2, SO4, F, Cl, Br, PO4) in aqueous samples

INTERNAL METHOD

AQ017_DELTA_CARBONO STRUCTURAL ANALYSIS Determination of stable isotopes of carbon by IRMS INTERNAL METHOD

AQ018_DELTA_ HIDROGEN

STRUCTURAL ANALYSIS Determination of stable hydrogen isotopes by IRMS INTERNAL METHOD

AQ080_ARSENICO_ ICPMS

STRUCTURAL ANALYSIS Determination of Arsenic in heavy GO by ICP-MS INTERNAL METHOD

AQ152_REAC_BASICA CHEMICAL ANALYSIS Simple reaction in open reactor INTERNAL METHOD

AQ154_MICRO_FRX STRUCTURAL ANALYSIS Micro-X-Ray fluorescence analysis INTERNAL METHOD

AQ020_ASTM5184_3/ AQ020_FO_INTA

STRUCTURAL ANALYSIS Quantification of metals in fuel oils INTERNAL METHOD

AQ022_POLIOL_ICP_1 STRUCTURAL ANALYSIS Quantification of Co and Zn in polyols by ICP-OES INTERNAL METHOD

AQ023_SN_FRX STRUCTURAL ANALYSIS Quantification of Sn in polyolefins by XRF INTERNAL METHOD

AQ024_ZN_FRX STRUCTURAL ANALYSIS Quantification of Zn in polyolefins by XRF INTERNAL METHOD

AQ070_AGUA_VA CHEMICAL ANALYSIS Determination of water content by Karl Fischer and amperometric detection

INTERNAL METHOD

AQ071_AGUA_VC CHEMICAL ANALYSIS Determination of water content by Karl Fischer and coulometric detection

INTERNAL METHOD

AQ146_DSC ANÁLISIS TÉRMICO Differential Scanning Calorimetry (DSC) INTERNAL METHOD

AQ004_TGA ANÁLISIS TÉRMICO Thermogravimetric analysis (TGA) INTERNAL METHOD

AQ129_SH2_EVOL STRUCTURAL ANALYSIS Determination of evolved hydrogen sulfide INTERNAL METHOD

BIO009_DEG_ POLIMEROS

BIOTECHNOLOGY Polymer degradation simulating biodegradation and composting standards

INTERNAL METHOD

AQ026_ARSENICO_ ICPMS

STRUCTURAL ANALYSIS Quantification of arsenic in crude INTERNAL METHOD

BIO054_TOX_EC50_15 BIOTECHNOLOGY Determination of toxicity EC50-15min INTERNAL METHOD

AQ138_OMNIAN_Vacío STRUCTURAL ANALYSIS Semi-quantitative analysis by XRF under vacuum INTERNAL METHOD

AQ029_CO3_HCO3 CHEMICAL ANALYSIS Quantification of carbonates and bicarbonates in aqueous samples INTERNAL METHOD

AQ157_CAUCHO_10G STRUCTURAL ANALYSIS Quantification of Li, Mg, Ca, Fe and / or Ti in rubber (10 g method) INTERNAL METHOD

AQ150_TDS_ASTM5907 CHEMICAL ANALYSIS Standard Test Methods for Filterable Matter (Total Dissolved Solids) ASTM D5907


Biotecnología



TYPE

OF TEST


AQ151_TSS_ASTM5907 CHEMICAL ANALYSIS Standard Test Methods for Nonfilterable Matter (Total Suspended Solids) in Water

ASTM D5907

AQ137_OMNIAN_HELIO STRUCTURAL ANALYSIS Semi-quantitative analysis by XRF in He

INTERNAL METHOD

AQ128_SH2 STRUCTURAL ANALYSIS

Quantification of dissolved hydrogen sulfide INTERNAL METHOD

AQ103_PH CHEMICAL ANALYSIS pH Determination INTERNAL METHOD

AQ076_CENIZAS_550/ AQ076_CENIZAS_700

CHEMICAL ANALYSIS Ash content determination INTERNAL METHOD

BIO006_CULTIV_MATRAZ

BIOTECHNOLOGY

Cultivation of microorganisms in different conditions on a small and medium scale: double-closed tube or Erlenmeyer

INTERNAL METHOD

AQ005_ASTMD3279 CHEMICAL ANALYSIS Asphaltenes determination ASTM D3279

AQ124_C_CONRADSON CHEMICAL ANALYSIS Determination of carbon residue Conradson (CCR) ASTM D189

AQ125_C_RAMSBOTTOM CHEMICAL ANALYSIS Determination of carbon residue Ramsbotton (RCR) ASTM D524

AQ009_CONDUCTIVIDAD CHEMICAL ANALYSIS Conductivity test ASTM D2624

AQ030_CATIONES_ICP_1 STRUCTURAL ANALYSIS Quantification of cations (Ca, Mg, Ba, Sr, Na, K and Fe) in

well water INTERNAL METHOD

AQ064_SI_FRX STRUCTURAL ANALYSIS

Quantification of silicon in polymers by XRF INTERNAL METHOD

AQ081_TBN_ASTMD2896/ AQ081_TBN_HCL/AQ081_ TBN_HClO4

CHEMICAL ANALYSIS

Determination of basicity TBN

ASTM D2896

AQ112_ASTM_D974 CHEMICAL ANALYSIS Acidity index ASTM D974

AQ113_I_ACIDEZ_COLOR CHEMICAL ANALYSIS Acid number (colorimetric-dielectric) UNE 62021-2

AQ119_ASTMD1159 CHEMICAL ANALYSIS Bromine number ASTM D1159

AQ120_ASTMD664 CHEMICAL ANALYSIS Neutralization number by potenciometric titration ASTM D664

AQ149_ASTMD_5185 STRUCTURAL ANALYSIS

Determination of 22 metals by ICP ASTM D5185

AQ002_IOH CHEMICAL ANALYSIS Determination of the Hydroxyl number (IOH) INTERNAL METHOD

AQ061_DQO CHEMICAL ANALYSIS Chemical Oxygen Demand (COD) INTERNAL METHOD

AQ115_INSAT_HG/BR CHEMICAL ANALYSIS Measurement of the degree of unsaturation by HG / Br methods

INTERNAL METHOD




TYPE

OF TEST


AQ038_ASTMD4662 CHEMICAL ANALYSIS Determination of acid numbers of polyols ASTM D4662

AQ148_PEROXIDOS CHEMICAL ANALYSIS Quantification of orrganic peroxides and / or acidity determination in SM-OP

INTERNAL METHOD

AQ144_NA_F.LLAMA STRUCTURAL ANALYSIS

Na content by flame photometry INTERNAL METHOD

AQ145_K_F.LLAMA STRUCTURAL ANALYSIS

K content by flame photometry INTERNAL METHOD

AQ007_UOP163 CHEMICAL ANALYSIS Mercaptan sulfur UOP-163

AQ117_UOP269 STRUCTURAL ANALYSIS

Basic nitrogen UOP-269

AQ139_ASTMD5762_4629 STRUCTURAL ANALYSIS

Nitrogen quantification by chemiluminescence ASTM D5762-4629

AQ140_S_ISO20846 STRUCTURAL ANALYSIS

Sulfur quantification by ultraviolet method ISO20846

AQ011_ASTMD7536 STRUCTURAL ANALYSIS

Chlorine quantification by Monochromatic Wavelength

Dispersive X-ray Fluorescence

ASTM D7536

AQ141_S_ASTMD4294 STRUCTURAL ANALYSIS

Sulfur quantification by Energy Dispersive X-ray Fluorescence

Spectrometry

ASTM D4294

AQ068_DMC_ICP STRUCTURAL ANALYSIS Quantification of Zn, Co and K in DMC catalysts

(EXT) INTERNAL METHOD

Documents

Tests list