Tetlow Kilns & Furnaces.

HILLDAV INDUSTRIES ARE AGENTS FOR

At Hilldav we have been making and selling kilns for over 38 years. In that time we have come to

know what makes a good kiln.

Reliability A kiln that will fire and keep on firing as you want.

Simplicity A kiln that is simple to operate.

Dependable A kiln with a full back up with parts and service.

As agents for Tetlow Kilns we not only sell but do the full back up, so when you get a Tetlow kiln

from us you don't just get a kiln you get the knowledge that we are there to make sure your kiln

keeps on firing well into the future.

We sell a range of Tetlow Electric kilns in Front and Top loading styles, look through the infor-

mation in the following pages and contact us if you need more information.

CERAMIC & CRAFT

TOP LOADING HEX-

AGONAL KILNS

LARGE FRONT LOADING KILNG

SMALL SINGLE

PHASE KILNS.

Hilldav Industries Pty. Ltd.

9 Vanessa Avenue

Baulkham Hills

NSW 2153

Telephone: 02 9688 1777

Mobil 0408788717

E-mail: mail@hilldav.com.au

Tetlow Kilns are:

Environmentally friendly.

Low density hot face insulating brick (fibre free).

Economical to operate.

One of Australia’s most experienced Kiln manufacturers.

Australia’s largest range, 32 standard sizes/custom sizes available.

Over 40 Years experience established 1963.

15,000 Kilns and Furnaces now in use throughout Australia & overseas.

Kanthal A1 elements.

Fast firing to 1300 C.

Safety switch/energy regulator/warning light standard on all electric kilns.

Types available, Front Load, Top Load, Octagonal.

LAB & DENTAL KILNS

Craft Kilns are all single phase, except for the K6TL/1300-R/10A

which is 2 phase. Lined with low density insulating brick have a

sheet steel casing [ available in Stainless steel ] use Kanthal A1 ele-

ments. Available with either Shimaden or Harco controllers

These kilns are all bench mounting, a heavy duty support stand is available to suit them.

The doors are mounted on the Left, they can be mounted on Parallelogram arms so that the door can be slide to one side

to keep the hot face away from the person operating the kiln if it needs to be opened while the kiln is hot [ Laboratory and

heat treatment work ]

Model Internal

W x D x H/mm

External

W x D x H/mm

Kg Lt3 Ft3 Phase

Volts Amps KW Temp °C

K2FL/1100-K/10A 230x230x230 610x432x445 30 12 0.40 1 240 10 2.4 1100

K2FL/1300-R/10A 230x 230x230 610x432x445 30 12 0.40 1 240 10 2.4 1300

K4FL/1100-K/10A 330x330x230 710x534x445 55 25 0.90 1 240 10 2.4 1100

K4FL/1300-R/15A 330x330x230 710x534x445 55 25 0.90 1 240 15 3.6 1300

K4AFL/1100-K/10A 330x330x330 788x560x546 75 35 1.40 1 240 10 2.4 1100

K4AFL/1300-R/15A 330x330x330 788x560x546 75 35 1.40 1 240 15 3.6 1300

K4BFL/1100-K/15A 330x330x460 788x560x673 85 50 1.74 1 240 15 3.6 1100

K4BFL/1300-R/20A 330x330x460 788x560x673 85 50 1.74 1 240 20 4.8 1300

K5TL/1300-R/15A 345x345x370 788x596x583 85 44 1.53 1 240 15 3.6 1300

K5ATL/1300-R/20A 345x345x445 788x596x660 85 52 1.84 1 240 20 4.8 1300

K6FL/1100-K/15A 380x380x460 838x610x673 95 66 2.30 1 240 15 3.6 1100

K6FL/1300-R/20A 380x380x460 838x610x673 95 66 2.30 1 240 20 4.8 1300

K6TL/1100-K/15A 380x380x460 838x686x660 95 66 2.30 1 240 15 3.6 1100

K6TL/1300-R/20A 380x380x460 838x686x660 95 66 2.30 1 240 20 4.8 1300

K6TL/1300-R/10A 380x380x460 838x686x660 95 66 2.30 2 415 10 4.8 1300

K6GL FL/1100-K/15A 460x460x300 915x686x520 95 63 2.30 1 240 15 3.6 1100

K6GL FL/1300-R-20A 460x460x300 915x686x520 95 63 2.30 1 240 20 4.8 1300

Please note: For extensive 1280°C/stoneware use, we can supply K6 as 240V/25amp, for extended operating life of elements, requires direct wiring or 30amp plug top and lead (not supplied).

SMALL

NOTE On the chart below:-

FL = FRONT LOADING

TL = TOP LOADING

1100-K = Top temp 1100ºc thermocouple type

“K”

1300-R = Top temp 1300ºc thermocouple type

“R”

Specifications subject to change without notification

Price for kiln only FL=Front Loading, TL= Top Loading

Kiln

MODEL

Price of Kiln with

Stainless Steel Casing

NO controller.

Price of Kiln with

Shimaden SR92 Tempera-

ture Controller.

Price of Kiln with

Harco HENC 8 Programmer/

controller

PRICE PRICE + GST PRICE PRICE + GST PRICE PRICE + GST

K2 FL $2,370.oo $2,607.oo $3,405.00 $3,745.oo $4,285.oo $4,713.50

K4 FL $2,620.oo $2,882.oo $3,655.oo $4,020.50 $4,535.oo $4,788.30

K4A FL $3,080.oo $3,388.oo $4,115.oo $4,526.50 $4,995.oo $5,494.50

K4B FL $3,410.oo $3,751.oo $4,445.oo $4,889.50 $5,325.oo $5,857.50

K5 TL $3,050.oo $3,355.00 $4,085.oo $4493.50 $4,965.oo $5,461.50

K5A TL $3,680.oo $4,048.oo $4,715.oo $5,186.50 $5,595.oo $6,154.50

K6 TL $4,290.oo $4,719.oo $5,325.oo $5,857.50 $6,205.oo $6,825.50

K6 FL $4,290.oo $4,719.00 $5,325.oo $5,857.50 $6,205.00 $6,825.50

K6GL FL $4,290.oo $4,719.00 $5,325.oo $5,857.50 $6,205.00 $6,825.50

KILN STAND

For K2 to K6 kilns. $360.oo $396.oo

Prices for CRAFT KILNS Prices as from 1/6/14

The prices above are as at the factory Melbourne. Packing and shipping cost have to be added, depending on

your location . For a definite price ask for a quote, which will include all of these.

Model Internal

W x D x H/mm

External

W x D x H/mm

Kg Lt3 Ft3 Phase Volts Amps KW Temp °C

K7MW FL/1100-K/20A 460x460x460 970x830x900 175 97 3.40 1 240 20 4.8 1100

K7MW FL/1300-R/30A 460x460x460 970x830x900 175 97 3.40 1 240 30 7.2 1300

K7MW FL/1300-R/15A 460x460x460 970x830x900 175 97 3.40 2 415 15 7.2 1300

K7MW FL/1300-R/10A 460x460x460 970x830x900 175 97 3.40 3 415 10 7.2 1300

K7 FL/1300-R/10A 460x460x460 900x800x1690 300 97 3.40 3 415 10 7.2 1300

K7 TL/1300-R/10A 460x460x460 812x1500x965 360 97 3.40 3 415 10 7.2 1300

K8 TL/1300-R/15A 460x460x610 812x1092x1118 410 129 4.50 3 415 15 10.8 1300

K8A TL/1300-R/16.6A 570x570x460 1295x1610x1220 420 149 5.28 3 415 16.6 12 1300

K8A FL/1300-R/16.6A 570x570x460 1015x960x1960 350 149 5.28 3 415 16.6 12 1300

K8B FL/1300-R/10.8A 460x460x686 955x800x1690 380 145 5.06 3 415 15 10.8 1300

K9 FL/1300-R/14.4A 460x460x915 900x800x1690 460 193 6.80 3 415 20 14.4 1300

K9 TL/1300-R/14.4A 915x460x460 1473x1300x1220 460 193 6.80 3 415 20 14.4 1300

K10 FL/1300-R/16.5A 610x610x610 1050x995x1690 500 226 8.00 3 415 23 16.5 1300

K10 TL/1300-R/16.5A 610x610x610 965x1650x1372 440 226 8.00 3 415 23 16.5 1300

K11 FL/1300-R/18A 460x610x915 900x950x1690 480 256 9.00 3 415 25 18 1300

K11 TL/1300-R/18A 915x460x610 1473x1500x1372 520 256 9.00 3 415 25 18 1300

K11A FL/1300-R/18A 610x610x762 1050x995x1690 500 283 10.00 3 415 25 18 1300

K11A TL/1300-R/18A 762x610x610 1320x1450x1372 530 283 10.00 3 415 25 18 1300

K12 FL/1300-R/20.16A 610x610x915 1050x995x1690 520 340 12.00 3 415 28 20.16 1300

K12 TL/1300-R/20.16A 915x610x610 1473x1450x1372 560 340 12.00 3 415 28 20.16 1300

K12A FL/1300-R/28.8A 610x610x1372 1200x1025x1885 580 510 18.00 3 415 40 28.8 1300

K12A TL/1300-R/28.8A 1372x610x610 1950x1450x1372 620 510 18.00 3 415 40 28.8 1300

K7 M/W fitted with No 3 Roof Vent

System complete with Stand

K11 A Front Load

K12A Front K9 Front Load

NOTE On the chart below:-

FL = FRONT LOADING

TL = TOP LOADING

1100-K = Top temp 1100ºc ther-

mocouple type “K”

1300-R = Top temp 1300ºc ther-

mocouple type “R”

Specifications subject to change without notification

By Tetlow Kilns & Furnaces Pty. Ltd.

Price for kiln only FL=Front Loading, TL=Top Loading

KILN

MODEL

Price for kiln with

Stainless steel Casing

No Controlls

Price for kiln with

Shimaden SR92 Temperature

Controller

PRICE with GST

Price Price + GST Price Price + GST Price Price + GST

K7MW * $6,420.oo $7,062.oo $7,455.oo $8,200.50 $8,335.oo $9,168.50

K7 FL $7,140.oo $7,854.oo $8,230.oo $9,053.00 $9,100.oo $10,010.oo

K7 TL $7,140.00 $7,854.oo $8,230.oo $9,053.oo $9,100.oo $10,010.oo

K8 TL $7,410.oo $8,151.oo $8,500.00 $9,350.oo $9,370.oo $10,307.oo

K8A TL $8,410.oo $9,251.oo $9,500.oo $10,450.oo $10,370.oo $11,407.oo

K8A FL $8,160.oo $8,976.oo $9,250.oo $10,175.oo $10,120.oo $11,132.oo

K8B FL $7,560.oo $8,316.oo $8,650.oo $9,515.oo $9,520.oo $10,472.oo

K9 TL $8,900.oo $9,790.oo $9,990.oo $10,989.oo $10,860.oo $11,946.oo

K9 FL $8,660.oo $9,526.oo $9,750.oo $10,725.oo $10,620.oo $11,682.oo

K10 TL $9,260.oo $10,186.oo $10,350.oo $11,385.oo $11,220.oo $12,342.oo

K10 FL $9,400.oo $10,340.oo $10,490.oo $11,539.oo $11,360.oo $12,496.oo

K11 TL $9,930.oo $10,923.oo $11,020.oo $12,122.oo $11,890.oo $13,079.oo

K11 FL $9,440.00 $10,384.oo $10,530.oo $11,583.oo $11,400.oo $12,540.oo

K11A TL $9,950.oo $10,945.oo $11,040.oo $12,144.oo $11,910.oo $13,101.oo

K11A FL $9,700.oo $10,670.oo $10,790.oo $11,869.oo $11,660.oo $12,826.oo

K12 TL $11,920.oo $13,112.oo $13,010.oo $14,311.oo $13,880.oo $15,268.oo

K12 FL $11,560.oo $12,716.oo $12,650.oo $13,915.oo $13,520.oo $14,872.oo

K12A TL $16,240.00 $17,864.oo $17,330.oo $19,063.oo $18,200.oo $20,020.oo

K12A FL $15,830.oo $17,413.oo $16,920.oo $18,612.oo $17,790.oo $19,569.oo

Stand for kiln model — K7MW * $700 $770.oo

All of these kiln come with ‘over temperature control protection’ as a standard feature.

Prices for LARGER KILNS Prices as from 1/6/14

The prices above are as at the factory Melbourne. Packing and shipping cost have to be added, depending on

your location . For a definite price, ask for a quote, which will include all of these.

Australian Made multi sided (octagonal) - Ceramic, Cone Art Kilns proudly Manufactured by

Tetlow Kilns & Furnaces Pty. Ltd.

These kilns can be fitted with a Dawson Kiln Sitter™ or a Shimaden SR92 controller or Harco controller.

All kilns come with Stainless Steel bodies and kiln furniture.

Model Kiln Shelf Kiln Props

1 & 2 2 Full Shelves

1 Half Shelves

3 x 1”, 4”

3 2 Full Shelves

1 Half Shelves

3 x 1”, 4”, 6”

4 & 5 2 Full Shelves

1 Half Shelves

3 x 1”

6 x 4”, 6”

6 4 Half Shelves 3 x 1”

6 x 4”, 6”

7 & 8 5 Half Shelves 6 x 1”, 4”, 6’, 8”

9 6 Half Shelves

1 Half Shelves

6 x 1”, 4”, 6”, 8”

Model Diam High Lt Ft 3 Phase Volt Amp kW

1 280 270 19 .69 1 240 10 2.4

2 280 395 28 1.0 1 240 12.5 3.0

3 360 395 42 1.48 1 240 15 3.6

4 445 510 86 3.0 1 240 25 6.0

5 445 620 104 3.67 1 240 30 7.2

6 585 740 142 5.0 2 415 20 9.6

7 585 740 206 7.28 3 415 17.5 12.6

8 585 850 238 8.4 3 415 17.5 12.6

NOTE: The chart below shown electrical information for the cone 8 version of the kiln only.

Specifications subject to change without notification

Standard Kiln

Cone 8 with

Dawson Kiln Sitter.

Extra for

Cone 10

Kiln with

Shimaden

SR92 Temperature

Controller

Type ‘R’

Kiln with

Harco

HENC8 program-

mer/Controller

Type ‘R’

MODEL PRICE PRICE

with GST

PRICE PRICE

with GST

PRICE PRICE

with GST

PRICE PRICE

with GST

1 $1,870.oo $2,057.oo $190.oo $209.oo $2,920.oo $3,212.oo $3,710.oo $4,081.oo

2 $2,220.oo $2,442.oo $230.oo $253.oo $3,270.oo $3,597.oo $4,060.oo $4,466.oo

3 $2,490.oo $2,739.oo $270.oo $297.oo $3,540.oo $3,894.oo $4,330.oo $4,763.oo

4 $3,090.oo $3,399.oo $300.oo $330.oo $4,140.oo $4,554.oo $4,930.oo $5,423.oo

5 $3,400.oo $3,740.oo $370.oo $407.oo $4,450.oo $4,896.oo $5,240.oo $5,764.oo

6 $4,220.oo $4,642.oo $400.oo $440.oo $5,270.oo $5,797.oo $6,060.oo $6,666.oo

7 $5,240.oo $5,764.oo $440.oo $484.oo $6,290.oo $6919.oo $7,080.oo $7,788.oo

8 $5,800.oo $6,380.oo $490.oo $539.oo $6,850.oo $7535.oo $7,640.oo $8,404.oo

Prices for MULTI SIDED TOP LOADERS Prices as from 1/6/14

The prices above are as at the factory Melbourne. Packing and shipping cost have to be added, depending on

your location . For a definite price, ask for a quote which will include all of these.

All kilns fitted with Dawson Kiln Sitters, energy regulators, warning lights, safety switch on lid (turns power

off when the lid is opened) stainless steel body, spy holes & furniture.