TEXTILES, CLOTHING & FOOTWEAR TRAINING PACKAGE PURCHASING ... v… · TEXTILES, CLOTHING & FOOTWEAR TRAINING PACKAGE PURCHASING GUIDE LMT00 Version 3 Western Australian Department

TEXTILES, CLOTHING & FOOTWEAR TRAINING PACKAGE PURCHASING GUIDE

LMT00

Version 3

Western Australian Department of Education and Training

June 2007

Western Australian Purchasing Guide – Textiles, Clothing and Footwear Training Package LMT00 Version 3 1

CONTENTS FOREWORD..............................................................................................................2 TRANSITION ARRANGEMENTS ....................................................................................3 FUNDING..................................................................................................................3 NOMINAL DURATION OF QUALIFICATIONS ....................................................................3 QUALIFICATIONS AND NOMINAL HOURS.......................................................................4 UNITS OF COMPETENCY AND NOMINAL HOURS............................................................5 QUALIFICATIONS WHICH REPLACE QUALIFICATIONS FROM THE PREVIOUS VERSION OF THE TEXTILES, CLOTHING AND FOOTWEAR TRAINING PACKAGE ..........................................9 TRAINEESHIPS AND APPRENTICESHIPS .....................................................................12 LMT10306 CERTIFICATE I IN TEXTILE FABRICATION..................................................13 LMT11006 CERTIFICATE I IN DRY CLEANING OPERATIONS........................................14 LMT11106 CERTIFICATE I IN TEXTILES CLOTHING AND FOOTWEAR SPECIALISING IN TEXTILE PRODUCTION .............................................................................................15 LMT11106 CERTIFICATE I IN TEXTILES CLOTHING AND FOOTWEAR SPECIALISING IN CLOTHING PRODUCTION..........................................................................................16 LMT20106 CERTIFICATE II IN TEXTILE PRODUCTION (INTERMEDIATE) ........................17 LMT20206 CERTIFICATE II IN TEXTILE PRODUCTION (COMPLEX OR MULTIPLE PROCESSES) ..........................................................................................................18 LMT20506 CERTIFICATE II IN TEXTILE FABRICATION.................................................19 LMT20606 CERTIFICATE II IN CLOTHING PRODUCTION (INTERMEDIATE) [SPECIAL NEEDS] ..................................................................................................................20 LMT20706 CERTIFICATE II IN CLOTHING PRODUCTION (COMPLEX OR MULTIPLE PROCESSES) ..........................................................................................................21 LMT 21106 CERTIFICATE II IN FOOTWEAR REPAIR....................................................22 LMT21306 CERTIFICATE II IN HIDE, SKIN AND LEATHER ............................................23 LMT 21406 CERTIFICATE II IN LAUNDRY OPERATIONS ..............................................24 LMT21506 CERTIFICATE II IN DRY CLEANING OPERATIONS.......................................25 LMT21706 CERTIFICATE II IN APPLIED FASHION DESIGN AND TECHNOLOGY...............26 LMT21706 CERTIFICATE II IN APPLIED FASHION DESIGN AND TECHNOLOGY [INDIGENOUS] .........................................................................................................27 LMT30106 CERTIFICATE III IN TEXTILE PRODUCTION................................................28 LMT30406 CERTIFICATE III IN TEXTILE FABRICATION................................................29 LMT30506 CERTIFICATE III IN CLOTHING PRODUCTION [SPECIAL NEEDS] ..................31 LMT30506 CERTIFICATE III IN CLOTHING PRODUCTION.............................................33 LMT30806 CERTIFICATE III IN FOOTWEAR REPAIR ...................................................34 LMT31006 CERTIFICATE III IN HIDE, SKIN AND LEATHER ...........................................35 LMT31106 CERTIFICATE III IN LAUNDRY OPERATIONS ..............................................36 LMT31206 CERTIFICATE III IN DRY CLEANING OPERATIONS......................................37 LMT31406 CERTIFICATE III IN APPLIED FASHION DESIGN AND TECHNOLOGY [INDIGENOUS] .........................................................................................................38 LMT40306 CERTIFICATE IV IN CLOTHING PRODUCTION ............................................39 LMT41006 CERTIFICATE IV IN APPLIED FASHION DESIGN AND TECHNOLOGY .............40 LMT50106 DIPLOMA OF TEXTILES CLOTHING AND FOOTWEAR ..................................42 LMT50306 DIPLOMA OF APPLIED FASHION DESIGN AND TECHNOLOGY ......................43 LMT60306 ADVANCED DIPLOMA OF APPLIED FASHION DESIGN AND TECHNOLOGY .....45


Foreword This Implementation Guide has been generated to enable the stakeholders in the Textiles, Clothing and Footwear Industry in Western Australia to participate in the managed implementation of the National Textiles, Clothing and Footwear Training Package LMT00 Version 3. Information within this Guide should provide guidance on how competency standards may be selected and applied to achieve suitable outcomes and qualifications, for and within an industry. The Textiles, Clothing and Footwear Training Package LMT00 Version 3 was endorsed by Ministers for vocational education and training on 13 September 2006.


Transition Arrangements Registered Training Organisations (RTOs) are required to deliver Training Package qualifications within 12 months of endorsement of the Training Package by the National Quality Council (NQC). A current accredited course, however, may be used until its accreditation expires. A RTO with the scope of registration authorising delivery of existing accredited courses in a defined industry area will be deemed to have the resources and facilities to deliver the new qualification/s in that industry area. An Amendment to Scope will be necessary where the industry area is not within scope. The Training Accreditation Council (TAC) will need to be advised of any new qualifications from the Training Package being delivered. Existing Courses Existing Western Australian owned courses affected by the introduction of the new qualifications will be retired as soon as practicable. New enrolments in September 2007 should therefore be directed into Training Package qualifications. Transition to New Qualifications Students currently enrolled in a Training Package qualification in Textiles, Clothing and Footwear should be permitted to complete the program they enrolled in initially, unless the move to the related qualification from a Training Package can be made without disadvantage to a student. Funding Some learners may only achieve a Statement of Attainment during their enrolment period with the RTO. Separate funding is not provided to assess the learner who has left his/her studies and then, at a later date, wants to complete an integrated assessment to achieve a certificate qualification. The RTO will be required to make special arrangements to issue the final qualification. This process may involve an invitation to the employer (if applicable) to participate in the assessment in the workplace. Nominal Duration of Qualifications

The maximum nominal hours are identified for each Training Package qualification. Nominal hours may vary within a qualification depending on the units of competency selected and the delivery strategies used; however, training delivery will not be funded beyond the maximum nominal hours indicated. Nominal hours are for structured training only and include both delivery and assessment. Definition of nominal hours (supervised) The hours of supervised learning or training deemed necessary to cover the educational material in a training program when undertaken in standard classroom delivery mode. (Source: A Glossary of Australian Vocational Education and Training Terms).


Qualifications and Nominal Hours The following table provides a summary of the qualifications and nominal hours in the Textiles, Clothing and Footwear Training Package LMT00 Version 3 presented in this guide.

National ID Training Package Qualification Title Maximum Nominal Hours

LMT10306 Certificate I in Textile Fabrication 140 LMT10806 Certificate I in Laundry Operations 120 LMT11006 Certificate I in Dry Cleaning Operations 170 LMT11106 Certificate I in Textiles Clothing and Footwear 210 LMT20106 Certificate II in Textile Production (Intermediate) 410 LMT20206 Certificate II in Textile Production (Complex or Multiple

Processes) 490

LMT20506 Certificate II in Textile Fabrication 320 LMT20606 Certificate II in Clothing Production (Intermediate) 610 LMT20706 Certificate II in Clothing Production (Complex or

Multiple Processes) 340

LMT21106 Certificate II in Footwear Repair 290 LMT21306 Certificate II in Hide, Skin And Leather 400 LMT21406 Certificate II in Laundry Operations 225 LMT21506 Certificate II in Dry Cleaning Operations 480 LMT21706 Certificate II in Applied Fashion Design and

Technology 355

LMT30106 Certificate III in Textile Production 690 LMT30406 Certificate III in Textile Fabrication 600 LMT30506 Certificate III in Clothing Production 745 LMT30806 Certificate III in Footwear Repair 260 LMT31006 Certificate III in Hide, Skin and Leather 560 LMT31106 Certificate III in Laundry Operations 325 LMT31206 Certificate III in Dry Cleaning Operations 330 LMT31406 Certificate III in Applied Fashion Design and

Technology 835

LMT40306 Certificate IV in Clothing Production 846 LMT41006 Certificate IV in Applied Fashion Design and

Technology 870

LMT50106 Diploma of Textiles Clothing and Footwear 878 LMT50306 Diploma of Applied Fashion Design and Technology 1600 LMT60106 Advanced Diploma of Textiles Clothing and Footwear 900 LMT60306 Advanced Diploma of Applied Fashion Design and

Technology 750


Units of Competency and Nominal Hours The following table provides a summary of the units of competency and nominal hours in the Textiles, Clothing and Footwear Training Package LMT00 Version 3.

National ID Unit of Competency Title Nominal

Hours LMTCL1001A Produce a simple garment 40 LMTCL2001A Use a sewing machine 30 LMTCL2002A Provide hand sewing and finishing support 30 LMTCL2003A Identify fibres and fabrics 40 LMTCL2004A Sew components 50

LMTCL2005A Use specialised machinery or processes to assist assembly production 30

LMTCL2006A Press work 20 LMTCL2007A Lay up, mark and cut uncomplicated fabrics and lays 20 LMTCL2008A Finish garment production 20 LMTCL2009A Despatch work 10 LMTCL2010A Modify patterns to create basic styles 50 LMTCL2011A Draw and interpret a basic sketch 25

LMTCL2012A Organise and plan own work in a home-based production environment 50

LMTCL2013A Block and shape headwear by machine 30 LMTCL2014A Pack, store, handle and despatch headwear 20 LMTCL2015A Finish headwear 30 LMTCL2016A Trim headwear 40

LMTCL2017A Access and use information resources for clothing production operations 20

LMTCL2018A Perform basic maintenance of headwear 20 LMTCL3001A Identify fabric performance and handling requirements 40 LMTCL3002A Prepare and produce sewn garment 60 LMTCL3003A Perform garment repairs and alterations 40 LMTCL3004A Press whole garments 20 LMTCL3005A Lay up and cut complicated fabrics and lays 30 LMTCL3006A Assemble bra or swimwear 40 LMTCL3007A Embellish garment by hand or machine 40 LMTCL3008A Set and produce digital embroidery 30 LMTCL3009A Develop patterns from a block using basic patternmaking principles 50 LMTCL3011A Contribute to garment production process improvements 30 LMTCL3012A Make marker for complicated fabrics and lays 40 LMTCL3013A Interpret patterns and apply pattern information 30 LMTCL3014A Interact and communicate with garment production personnel 20 LMTFD2001A Design and produce a simple garment 60 LMTFD2002A Apply printing techniques to produce Indigenous textile designs 80 LMTFD2003A Apply dyeing techniques to produce Indigenous textile designs 80 LMTFD2004A Work within an Indigenous cultural framework 40 LMTFD2005A Identify design process for fashion designs 30 LMTFD3001A Market design product to local outlets 30 LMTFD3002A Design and produce Indigenous printed textiles to a brief 80 LMTFD3003A Prepare design concept for a simple garment 40 LMTFD3004A Draw a trade drawing for fashion design 30 LMTFD4001A Apply design studio process 60 LMTFD4002A Apply principles of colour theory to fashion design development 25 LMTFD4003A Assist in preparation of preliminary design concepts 50 LMTFD4004A Calculate cost estimates for fashion products 20


National ID Unit of Competency Title Nominal Hours

LMTFD4005A Communicate and sell design concepts 30 LMTFD4006A Interact and network with fashion industry participants 60 LMTFD4007A Conduct quality assurance for patterns and garments 30

LMTFD4008A Construct stock size block for garment to meet size and fit specifications 40

LMTFD4009A Create and edit digital embroidery designs 20

LMTFD4010A Create pattern to meet design specifications applying advanced patternmaking principles 80

LMTFD4011A Cut fabrics for prototype designs 20 LMTFD4012A Develop product specifications for fashion design 20 LMTFD4013A Grade 2D patterns 80

LMTFD4014A Identify influences on contemporary fashion designs and construction techniques 30

LMTFD4015A Create pattern from block to meet customer specifications 50 LMTFD4016A Sew design prototypes 60 LMTFD4017A Source materials and resources for production of fashion designs 30 LMTFD4018A Use and apply sizing systems appropriate for fashion design 20 LMTFD4019A Use colourisation techniques on fabrics 30 LMTFD4020A Use electronic fashion design tools 40 LMTFD4021A Drape fabrics to make patterns 40 LMTFD5001A Design bras and swimwear 30 LMTFD5002A Develop and test patterns for bras and swimwear 50 LMTFD5003A Analyse fit model 40 LMTFD5004A Develop marketing plans for fashion products 50 LMTFD5005A Manipulate fabrics to create new finishes 60 LMTFD5006A Evaluate fashion designs against set criteria 30 LMTFD5007A Analyse influences on contemporary fashion designs 50 LMTFD5008A Conduct fashion design purchasing 40 LMTFD5009A Cost design production 40 LMTFD5010A Develop and present design concepts within specific guidelines 60 LMTFD5011A Produce fashion illustrations 70 LMTFD5012A Perform contour draping 50 LMTFD5013A Develop merchandising plans for fashion products 40 LMTFD5014A Construct complex blocks for fashion garments 100 LMTFD5015A Develop patterns for complex fashion garments 90 LMTFD5016A Grade shaped patterns 60 LMTFD5017A Apply design studio processes to meet client brief 90 LMTFD5018A Determine and specify advanced construction processes 90 LMTFD5019A Analyse individual fit and make pattern alterations 100 LMTFD6001A Evaluate commercial viability of designs 60 LMTFD6002A Manage product development of fashion designs 60 LMTFD6003A Manage fashion design process 80 LMTFD6004A Manage advanced patternmaking processes 90 LMTFD6005A Drape structured over-garments 80 LMTFD6006A Develop a fashion range 90 LMTFD6007A Implement specialised patternmaking technologies 100

LMTFD6008A Apply studio processes to create and produce designs for commercial production 90

LMTFD6009A Analyse fashion industry textiles to guide commercial development 60 LMTFP1001A Embellish footwear 80 LMTFP2001A Identify materials used in footwear production 50 LMTFP2002A Perform stuff cutting 40 LMTFP2003A Cut printed materials by machine 40 LMTFP2004A Cut non-printed leather by machine 40



LMTFP2005A Operate machine to sew upper 40 LMTFP2006A Machine upper according to product requirements 50 LMTFP2007A Last shoe by machine 60 LMTFP2008A Perform moulding operations 50 LMTFP2009A Perform footwear finishing operations 60 LMTFP2010A Repair footwear product 60 LMTFP2011A Perform table-based operations 50 LMTFP3001A Cut leather by hand 50 LMTFP3002A Hand last shoe 60 LMTFP3003A Assemble shoe by hand 60 LMTFP3004A Contribute to footwear production improvement processes 70 LMTFP3005A Supervise footwear production operations 70 LMTFP3006A Apply foot anatomy principles to footwear production 80 LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 LMTGN2004A Work in a team environment 30 LMTGN2005A Perform minor maintenance 30 LMTGN2006A Perform test or inspection to check product quality 40 LMTGN2007A Select, transfer and remove materials and products 40 LMTGN2008A Coordinate work of team or section 30 LMTGN2009A Operate computing technology in a TCF workplace 20 LMTGN2010A Perform tasks to support production 30 LMTGN2011A Undertake carding operations 50 LMTGN3001A Control production in a section of a TCF enterprise 60 LMTGN3002A Organise and plan own work to achieve planned outcomes 30 LMTGN3003A Estimate and cost job 50 LMTGN3005A Plan tasks to assist production operations 80 LMTGN3006A Take responsibility for visitors and new employees 30 LMTGN5001A Participate in production planning processes 60 LMTGN5002A Coordinate quality assurance for TCF products and services 80 LMTGN5003A Work with international TCF supply chains 40 LMTGN6001A Develop and implement a sales and marketing strategy 60 LMTGN6002A Manage quality system and procedures 100 LMTGN6003A Research and evaluate processes and products 80

LMTGN6004A Negotiate and manage contracts to produce finished design products 80

LMTTN2001A Set up and operate a dry laid web forming machine 50 LMTTN2002A Set up and operate a spun bond web forming machine 50

LMTTN2003A Use basic recognition techniques to identify technical and nonwoven textiles 40

LMTTN2004A Undertake web bonding processes 50 LMTTN2005A Undertake Web conversion and finishing 50

LMTTN2006A Identify purpose and performance outcomes of technical textile product 40

LMTTN2007A Conduct technical textile mechanical finishing processes 50 LMTTN2008A Conduct heat setting on technical textiles 50 LMTTN2009A Apply surface coating to technical textiles 50 LMTTN2010A Apply laminations and fusible interlinings to technical textiles 50

LMTTN2011A Undertake fibre blending and feeding for nonwoven technical production processes 50

LMTTX1001A Produce a simple textile fabric 40

LMTTX2001A Identify fibres, yarns and textile materials and their uses in textile production 50



LMTTX2002A Prepare yarn for textile manufacturing 50 LMTTX2003A Perform spinning operations 50 LMTTX2004A Perform tufting operations 50 LMTTX2005A Perform creeling operations 50 LMTTX2006A Operate a weaving loom 50 LMTTX2007A Perform knitting operations 50 LMTTX2008A Apply finishing processes to textile production 50 LMTTX2009A Weigh and check textile materials and products 20 LMTTX2010A Load and operate dyeing equipment 40 LMTTX2011A Repair textile product 60 LMTTX2012A Perform industrial sewing on textile products 50 LMTTX2013A Conduct packaging or folding for textile production 50 LMTTX2014A Use specialised machinery to assist textile production 50

LMTTX2015A Handle and prepare chemicals, dyes and other substances used in textile production 50

LMTTX2016A Perform knotting for weaving operations 30

LMTTX2017A Access and use information resources for textile production operations 30

LMTTX2018A Restart machine after stoppage 60 LMTTX3001A Identify quality and types of textile fibres, yarns and fabrics 50 LMTTX3002A Contribute to textile production process improvements 40 LMTTX3003A Supervise textile production operations 50 LMTTX3004A Set up textile production machines for product change 60 LMTTX3005A Organise and interpret tests 60 LMTTX3006A Ensure efficient operation of textile machines 40 LMTTX3007A Prepare dyes for textile production 50 LMTTX3008A Select raw materials 40 LMTTX3009A Operate in a complex textile production environment 50 LMTTX3010A Monitor textile production processes 40


Qualifications which replace qualifications from the previous version of the Textiles, Clothing and Footwear Training Package

The following table provides an overview of the qualifications from the Textiles, Clothing and Footwear Training Package which replace qualifications from the existing version of the Training Package.

Textiles, Clothing and Footwear Training Package LMT00 Version 2


National ID Qualification Title Hours National ID Qualification Title Hours LMT10100 Certificate I in Textile Production 0 LMT10400 Certificate I in Clothing Production 0 LMT10600 Certificate I in Footwear Production 150

LMT11106 Certificate I in Textiles, Clothing and Footwear 210

LMT10200 Certificate I in Early Stage Wool Processing 150 LMT10206 Certificate I in Early Stage Wool Processing 150

LMT10300 Certificate I in Textile Fabrication 140 LMT10306 Certificate I in Textile Fabrication 140 LMT10500 Certificate I in Headwear/Millinery 160 LMT10506 Certificate I in Headwear/Millinery 160 LMT10700 Certificate I in Leather Goods Production 170 LMT10706 Certificate I in Leather Goods Production 170 LMT10800 Certificate I in Laundry Operations 0 LMT10806 Certificate I in Laundry Operations 120 LMT11000 Certificate I in Dry Cleaning Operations 270 LMT11006 Certificate I in Dry Cleaning Operations 270

LMT20100 Certificate II in Textile Production (Intermediate) 205 LMT20106 Certificate II in Textile Production (Intermediate) 410

LMT20200 Certificate II in Textile Production (Complex or Multiple Processes) 185 LMT20206 Certificate II in Textile Production (Complex or Multiple

Processes) 490

LMT20300 Certificate II in Early Stage Wool Processing 200 LMT20306 Certificate II in Early Stage Wool Processing 200

LMT20400 Certificate II in Cotton Ginning 0 LMT20406 Certificate II in Cotton Ginning 0 LMT20500 Certificate II in Textile Fabrication 320 LMT20506 Certificate II in Textile Fabrication 320*

LMT20600 Certificate II in Clothing Production (Intermediate) 610 LMT20606 Certificate II in Clothing Production (Intermediate) 610

LMT20700 Certificate II in Clothing Production (Complex or Multiple Processes) 585 LMT20706 Certificate II in Clothing Production (Complex or


LMT20800 Certificate II in Headwear/Millinery 240 LMT20806 Certificate II in Headwear/Millinery 240




National ID Qualification Title Hours National ID Qualification Title Hours

LMT20900 Certificate II in Footwear Production (Intermediate) 220 LMT20906 Certificate II in Footwear Production (Intermediate) 220

LMT21000 Certificate II in Footwear Production (Complex or Multiple Processes) 670 LMT21006 Certificate II in Footwear Production (Complex or


LMT21100 Certificate II in Footwear Repair 290 LMT21106 Certificate II in Footwear Repair 290 LMT21200 Certificate II in Leather Goods Production 180 LMT21206 Certificate II in Leather Goods Production 180 LMT21300 Certificate II in Hide, Skin and Leather 400 LMT21306 Certificate II in Hide, Skin And Leather 400 LMT21400 Certificate II in Laundry Operations 225 LMT21406 Certificate II in Laundry Operations 225*

LMT21500 Certificate II in Dry Cleaning Operations 480 LMT21506 Certificate II in Dry Cleaning Operations 480*

No previous equivalent. New qualification LMT21606 Certificate II in Technical Textiles and Nonwovens 0

No previous equivalent. New qualification LMT21706 Certificate II in Applied Fashion Design and Technology 355

LMT30100 Certificate III in Textile Production 690 LMT30106 Certificate III in Textile Production 690 LMT30200 Certificate III in Early Stage Wool Processing 360 LMT30206 Certificate III in Early Stage Wool Processing 360 LMT30300 Certificate III in Cotton Ginning 0 LMT30306 Certificate III in Cotton Ginning 0 LMT30400 Certificate III in Textile Fabrication 800* LMT30406 Certificate III in Textile Fabrication 600*

LMT30500 Certificate III in Clothing Production 764 LMT30506 Certificate III in Clothing Production 745 LMT30600 Certificate III in Headwear/Millinery 235 LMT30606 Certificate III in Headwear/Millinery 235 LMT30700 Certificate III in Footwear Production 770 LMT30706 Certificate III in Footwear Production 770 LMT30800 Certificate III in Footwear Repair 260 LMT30806 Certificate III in Footwear Repair 260 LMT30900 Certificate III in Leather Goods Production 700 LMT30906 Certificate III in Leather Goods Production 700 LMT31000 Certificate III in Hide, Skin and Leather 660* LMT31006 Certificate III in Hide, Skin And Leather 560*

LMT31100 Certificate III in Laundry Operations 325 LMT31106 Certificate III in Laundry Operations 405* LMT31200 Certificate III in Dry Cleaning Operations 325 LMT31206 Certificate III in Dry Cleaning Operations 330

No previous equivalent. New qualification LMT31406 Certificate III in Applied Fashion Design and Technology 835




National ID Qualification Title Hours National ID Qualification Title Hours

* Nominal hours include hours from lower level qualifications as specified in the qualification packaging rules.

No previous equivalent. New qualification LMT31806 Certificate III in Technical Textiles and Nonwovens 0 LMT40100 Certificate IV in Textile Production 670 LMT40106 Certificate IV in Textile Production 670 LMT40200 Certificate IV in Cotton Ginning 0 LMT40206 Certificate IV in Cotton Ginning 0

LMT40300 Certificate IV in Clothing Production 846 LMT40306 Certificate IV in Clothing Production 846 LMT40400 Certificate IV in Footwear Production 470 LMT40406 Certificate IV in Footwear Production 470 LMT40500 Certificate IV in Leather Goods Production 520 LMT40506 Certificate IV in Leather Goods Production 520 LMT40600 Certificate IV in Hide, Skin and Leather 480 LMT40606 Certificate IV in Hide, Skin And Leather 480 LMT40703 Certificate IV in Millinery 0 Not revised

LMT40803 Certificate IV in Laundry Operations and Supervision 0 Not revised

LMT40903 Certificate IV in Supply and Fitting of Pre-Manufactured Medical Grade Footwear 0 Not revised

No previous equivalent. New qualification LMT41006 Certificate IV in Applied Fashion Design and Technology 870

LMT50100 Diploma of Textiles Clothing and Footwear 878 LMT50106 Diploma of Textiles Clothing and Footwear 878 LMT50203 Diploma of Medical Grade Footwear 0 Not revised

No previous equivalent. New qualification LMT50306 Diploma of Applied Fashion Design and Technology 1600

LMT60100 Advanced Diploma of Textiles Clothing and Footwear 900 LMT60106 Advanced Diploma of Textiles Clothing and Footwear 900

LMT60203 Advanced Diploma of Medical Grade Footwear 0 Not revised

No previous equivalent. New qualification LMT60306 Advanced Diploma of Applied Fashion Design and Technology 750


Traineeships and Apprenticeships

The following table provides a summary of the qualifications in the Textiles, Clothing and Footwear Training Package LMT00 Version 3 and the accredited traineeship and apprenticeship they will replace.



National ID Qualification Title Hours National ID Qualification Title Hours TRAINEESHIPS

LMT21100 Certificate II in Footwear Repair 290 LMT21106 Certificate II in Footwear Repair 290 LMT21500 Certificate II in Dry Cleaning Operations 480 LMT21506 Certificate II in Dry Cleaning Operations 480* LMT30200 Certificate III in Early Stage Wool Processing 710 LMT30206 Certificate III in Early Stage Wool Processing 360 LMT30500 Certificate III in Clothing Production 600 LMT30506 Certificate III in Clothing Production 745

LMT30800 Certificate III in Footwear Repair 260 LMT30806 Certificate III in Footwear Repair 260 LMT31200 Certificate III in Dry Cleaning Operations 325 LMT31206 Certificate III in Dry Cleaning Operations 330 LMT40300 Certificate IV in Clothing Production 246 LMT40306 Certificate IV in Clothing Production 846 LMT31000 Certificate III in Hide, Skin and Leather 660 LMT31006 Certificate III in Hide, Skin And Leather 560* LMT21400 Certificate II in Laundry Operations 225 LMT21406 Certificate II in Laundry Operations 225* LMT31100 Certificate III in Laundry Operations 325 LMT31106 Certificate III in Laundry Operations 405*

LMT30400 Certificate III in Textile Fabrication 800 LMT30406 Certificate III in Textile Fabrication 600*

LMT20200 Certificate II in Textile Production (Complex or Multiple Processes) 390 LMT20206 Certificate II in Textile Production (Complex or


LMT30100 Certificate III in Textile Production 240 LMT30106 Certificate III in Textile Production 690

APPRENTICESHIPS LMT30700 Certificate III in Footwear Production 770 LMT30706 Certificate III in Footwear Production 770 LMT30800 Certificate III in Footwear Repair 610 LMT30806 Certificate III in Footwear Repair 260 LMT30500 Certificate III in Clothing Production 764 LMT30506 Certificate III in Clothing Production 745


LMT10306 Certificate I in Textile Fabrication

Qualification Title Certificate I in Textile Fabrication Qualification Code LMT10306

Qualification Packaging Rules

Five (5) units of competency are required to complete this qualification.

1. Two (2) core units are mandatory 2. At least three(3) units must be selected from the Production

field as listed in Certificate I in Textile Fabrication

Unit Code Unit Title Nominal Hours

Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units LMTPRTF01AA Identify and handle materials 20 LMTPRTF02AA Lay out 20 LMTPRTF05AA Operate and maintain sewing machine - 1 24

TOTAL 114


LMT11006 Certificate I in Dry Cleaning Operations

Qualification Title Certificate I in Dry Cleaning Operations Qualification Code LMT11006


Four (4) units of competency are required to complete this qualification.

1. Two(2) core units are mandatory 2. Two (2) units must be selected from the Production field as

listed in Certificate I in Dry Cleaning Operations


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units LMTPRDC02A Receive and sort articles 60 LMTPRDC06A Operate finishing equipment 135

TOTAL 245


LMT11106 Certificate I in Textiles Clothing and Footwear specialising in Textile Production

Qualification Title Certificate I in Textiles Clothing and Footwear Qualification Code LMT 11106


Six (6) units of competency are required to complete this qualification. Units must be selected according to the rules described in Certificate I in Textiles Clothing and Footwear.

1. Three (3) Core Units must be selected 2. Two (2) specialist units must be selected from the Textile

Production, Clothing Production or Footwear Production industry sector.

3. A maximum of one (1) open elective unit may be selected. One unit can be selected from: • Other TCF Training Package units at AQF levels I & II • Other Training Packages at AQF levels I & II


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 Specialist Units Textile Production LMTTX1001A Produce a simple textile fabric 40

LMTTX2001A Identify fibres, yarns and textile materials and their uses in textile production 50

Open Elective Units LMTGN2010A Perform tasks to support production 30

TOTAL 210


LMT11106 Certificate I in Textiles Clothing and Footwear specialising in Clothing Production

Qualification Title Certificate I in Textiles Clothing and Footwear Qualification Code LMT11106


Six (6) units of competency are required to complete this qualification. Units must be selected according to the rules described in Certificate I in Textiles Clothing and Footwear.

4. Three (3) Core Units must be selected 5. Two (2) specialist units must be selected from the Textile

Production, Clothing Production or Footwear Production industry sector.

6. A maximum of one (1) open elective unit may be selected. One unit can be selected from: • Other TCF Training Package units at AQF levels I & II • Other Training Packages at AQF levels I & II


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 Specialist Units Clothing Production LMTCL1001A Produce a simple garment 40 LMTCL2003A Identify fibres and fabrics 40 Open Elective Units LMTCL2001A Use a sewing machine 30

TOTAL 200


LMT20106 Certificate II in Textile Production (Intermediate)

Qualification Title Certificate II in Textile Production (Intermediate) Qualification Code LMT20106


Ten (10) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Certificate II in Textile Production (Intermediate).

1. Three (3) Core Units must be selected 2. Five (5) specialist units must be selected. Two (2) of the

specialist units must be coded LMTTX2. 3. A maximum of two (2) open elective units may be selected.

Two units can be selected from: • Other Textile Production specialist units at the AQF

levels II & III • Other TCF Training Package units at AQF level II &

III • Other Training Packages at AQF levels I, II & III


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 Specialist Units LMTTX2008A Apply finishing processes to textile production 50 LMTTX2009A Weigh and check textile materials and products 20 LMTTX2011A Repair textile product 60 LMTTX2013A Conduct packaging or folding for textile production 50 LMTTX2014A Use specialised machinery to assist textile production 50 Open Elective Units LMTTX2018A Restart machine after stoppage 60


TOTAL 410


LMT20206 Certificate II in Textile Production (Complex or Multiple Processes)

Qualification Title Certificate II in Textile Production (Complex or Multiple Processes) Qualification Code LMT20206


Twelve (12) units of competency are required to complete this qualification. Units must be selected according to the rules described below.

1. Three (3) Core Units must be selected 2. Seven (7) Specialist Units must be selected. Two (2) of the

specialist units must be coded LMTTX2. A maximum of one (1) unit may be coded MCM.

3. A maximum of two (2) Open Elective Units may be selected. Two units can be selected from:

• Other Textile Production units at the AQF levels II & III • Other TCF Training Package units at AQF level II & III • Other Training Packages at AQF levels I, II & III


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 Specialist Units LMTTX2002A Prepare yarn for textile manufacturing 50 LMTTX2008A Apply finishing processes to textile production 50 LMTTX2009A Weigh and check textile materials and products 20 LMTTX2011A Repair textile product 60 LMTTX2013A Conduct packaging or folding for textile production 50 LMTTX2014A Use specialised machinery to assist textile production 50 LMTTX2018A Restart machine after stoppage 60 Open Elective Units LMTGN2004A Work in a team environment 30


TOTAL 490


LMT20506 Certificate II in Textile Fabrication

Qualification Title Certificate II in Textile Fabrication Qualification Code LMT20506


Seven (7) units of competency are required to complete this qualification, in addition to the required units from Certificate I in Textile Fabrication.

1. At least five (5) units must be selected from the Product Development and/or the Production fields as listed for Certificate II in Textile Fabrication

2. Up to two (2) units may be selected from any field aligned to: • Certificate II in Textile Fabrication or • Certificate II from another TCF Training Package

Qualification or • Certificate II from another Training Package

Qualification 3. For units identified by an asterisk *, competence in the

corresponding units(s) at the lower level(s), or relevant underpinning knowledge and skills associated with these units, will be acquired as part of the training program. (Refer to the Corresponding Units Tabled at the front of Volume 1 of the Training Package)

4. Units imported from other Training Package qualifications may have prerequisites, and these must be taken into account when developing a training program.

5. A unit of competency chosen from outside the TCF Training Package should be consistent with the Competency Profile relevant to the trainee and/or the enterprise (see Users Guide for examples) and must not have been achieved at a lower level qualification.


Core Units from Certificate I in Textile Fabrication LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units from Certificate I in Textile Fabrication LMTPRTF01AA Identify and handle materials 20 LMTPRTF02AA Lay out 20 LMTPRTF05AA Operate and maintain sewing machine - 1 24 Product Development LMTPDTF01AA Translate information into measurements and/or diagrams – 1 24 Production LMTPRTF01BA Identify and select materials - 1 40 LMTPRTF03AA Cut and shape - 1 24 LMTPRTF08AA Add accessories - 1 20 LMTPRTF14A Use hand tools 24 LMTPRTF15AA Inspect product - 1 20 Human Resources LMTGN2004A Work in a team environment 30

TOTAL 296


LMT20606 Certificate II in Clothing Production (Intermediate) [Special Needs]

This Training Program is restricted to students with special needs

Qualification Title Certificate II in Clothing Production (Intermediate) Qualification Code LMT20606


Ten (10) units are required to complete this qualification. Units must be selected according to the rules described in the Certificate II in Clothing Production (Intermediate).

1. Three (3) Core Units must be selected 2. Five (5) Specialist Units must be selected. Two (2) of the

Specialist units must be coded LMTCL2 3. A maximum of two (2) Open Elective units may be selected.

Two units can be selected from: • Other Clothing Production specialist units at the AQF

levels II & III • Other TCF Training Package units at AQF level II & III • Other Training Packages at AQF levels I, II & III


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 Specialist Units LMTCL2001A Use a sewing machine 30 LMTCL2002A Provide hand sewing and finishing support 30 LMTCL2004A Sew components 50 LMTCL2006A Press work 20 LMTCL2007A Lay up, mark and cut uncomplicated fabrics and lays 20 Open Elective Units LMFSF2001A Cut single layer fabric 40 LMTCL2009A Despatch work 10 Support Units 61338 Special Needs Skills Support - Apply quality standards 70

61339 Special Needs Skills Support - Follow defined OH&S policies and procedures 50

E1934 Supervised Skills Development 1 40 E1935 Supervised Skills Development 2 40 E1936 Supervised Skills Development 3 40 E1937 Supervised Skills Development 4 40 E1938 Supervised Skills Development 5 40

TOTAL 610


LMT20706 Certificate II in Clothing Production (Complex or Multiple Processes)

This program is suitable for a Clothing machinist

Qualification Title Certificate II in Clothing Production (Complex or Multiple Processes) Qualification Code LMT20706


Twelve (12) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Certificate II in Clothing Production (Complex or Multiple Processes)

1. Three (3) Core Units must be selected 2. Seven (7) Specialist Units must be selected. Two (2) of the

specialist units must be coded LMTCL2. A maximum of one (1) unit may be coded MCM

3. A maximum of two (2) Open Elective Units may be selected. Two units can be selected from:

• Other Clothing Production units at the AQF levels II & III

• Other TCF Training Package units at AQF level II & III • Other Training Packages at AQF levels I, II & III

Note: If Certificate II in Clothing Production (Intermediate) has been completed, an additional two units are required to complete this qualification. Units that have been credited towards lower level qualifications must not be selected in the additional two unit requirement. A minimum of one of these two units must be selected from the Specialist units coded LMTCL2.


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 Specialist Units LMTCL2001A Use a sewing machine 30 LMTCL2002A Provide hand sewing and finishing support 20 LMTCL2003A Identify fibres and fabrics 40 LMTCL2004A Sew components 50 LMTCL2006A Press work 20 LMTCL2008A Finish garment production 20 LMTCL2009A Despatch work 10 Open Elective Units

LMTCL2005A Use specialise machinery or processes to assist assembly production 30

LMTGN2010A Perform task to support production 30 TOTAL 340


LMT 21106 Certificate II in Footwear Repair

Qualification Title Certificate II in Footwear Repair Qualification Code LMT 21106


Ten (10) units of competency are required to complete this qualification.

1. Two (2) core units are mandatory 2. At least six (6) units must be selected from the Production field

as listed in Certificate II in Footwear Repair 3. Two (2) units may be selected from any field aligned to:

• Certificate II in Footwear Repair and/or • Certificate II from another TCF Training Package

Qualification and/or • Certificate II from another Training Package Qualification




Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units - Production LMTPRFR01A Assess and cost job 20 LMTPRFR02A Supply and fit new heel block and/or replace top piece 40 LMTPRFR03A Attach non-slip sole and/or heel 20 LMTPRFR04A Replace toe piece 20 LMTPRFR05A Replace half leather sole 40 LMTPRFR06A Sew/patch by machine 30 Elective Units – Engineering and Maintenance LMTGN2004A Work in a team environment 30 Elective Units – Sales and Marketing WRRS1B Sell products and services 18

TOTAL 268


LMT21306 Certificate II in Hide, Skin and Leather

Qualification Title Certificate II in Hide, Skin and Leather Qualification Code LMT21306


Eight (8) units of competency are required to complete this qualification.

1. Four (4) Core Units are mandatory 2. At least three (3) units must be selected from the Production

field as listed in Certificate II in Hide, Skin and Leather 3. One (1) unit may be selected from any field aligned to:

• Certificate II in Hide, Skin and Leather or • Certificate II from another TCF Training Package

Qualification or • Certificate II from another Training Package Qualification


5. A unit of competency chosen from outside the fields listed should be consistent with the Competency Profile relevant to the trainee and/or the enterprise (see Users Guide for examples).


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2005A Perform minor maintenance 30 LMTGN2010A Perform tasks to support production 30 Elective Units – Production LMTPRHL03A Operate machines to prepare hides or skins for tanning 60 LMTPRHL07A Operate machines to crust hides, skins or leather 60 LMTPRHL11A Trim hides, skins or leather 40 Elective Units – Human Resources LMTGN2004A Work in a team environment 30

TOTAL 300


LMT 21406 Certificate II in Laundry Operations

Qualification Title Certificate II in Laundry Operations Qualification Code LMT 21406


Two (2) units of competency are required to complete this qualification, in addition to the required units from Certificate I in Laundry Operations.

1. At least one (1) unit must be selected from the Production field as listed in Certificate II in Laundry Operations.

2. One (1) unit may be selected form any field aligned to: • Certificate II in Laundry Operations and/or • Certificate II from another TCF Training Qualification

and/or • Certificate II from another Training Package Qualification.

3. 3. Units imported from other Training Package qualifications may

have prerequisites and these must be taken into account when developing a training program.



Core Units from Certificate I in Laundry Operations LMTPRLA01A Collect, receive and sort product 30 LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units from Certificate I in Laundry Operations LMTPRLA02A Operate washing machines 40 Elective Units – Production LMTPRLA06A Perform Conditioning And/or Drying Processes 40 LMTPRLA07A Operate finishing equipment 50

TOTAL 210


LMT21506 Certificate II in Dry Cleaning Operations

Qualification Title Certificate II in Dry Cleaning Operations Qualification Code LMT21506


Two (2) units of competency are required to complete this qualification, in addition to the required units from Certificate I in Dry Cleaning Operations.

1. At least one (1) unit must be selected from the Production field as listed in Certificate II in Dry Cleaning Operations.

2. One (1) unit may be selected form any field aligned to: • Certificate II in Dry Cleaning Operations and/or • Certificate II from another TCF Training Qualification

and/or • Certificate II from another Training Package

Qualification 3. Units imported from other Training Package qualifications may




Core Units from Certificate I in Dry Cleaning Operations LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units from Certificate I in Dry Cleaning Operations LMTPRDC02A Receive and sort articles 60 LMTPRDC06A Operate finishing equipment 135 Elective Units – Production LMTPRDC04A Operate dry cleaning machines 140 LMTPRDC03A Perform pre- and post-spotting 85

TOTAL 470


LMT21706 Certificate II in Applied Fashion Design and Technology

Qualification Title Certificate II in Applied Fashion Design and Technology Qualification Code LMT 21706


Ten (10) units of competency are required to complete this qualification. Units must be selected according to the rules in the Certificate II in Applied Fashion Design and Technology.

1. All six (6) Core Units must be selected 2. Four (4) Specialist Units must be selected.


Core Units LMTCL2001A Use a sewing machine 30 LMTCL2003A Identify fibres and fabrics 40 LMTFD2001A Design and produce a simple garment 60 LMTFD2005A Identify design process for fashion designs 30 LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Specialist Units LMTCL2004A Sew components 50 LMTCL2010A Modify patterns to create basic styles 50 LMTCL2011A Draw and interpret a basic sketch 25 LMTGN2009A Operate computing technology in a TCF workplace 20

TOTAL 355


LMT21706 Certificate II in Applied Fashion Design and Technology [Indigenous]

(This Training Program is specialised for Indigenous and/or Regional students)

Qualification Title Certificate II in Applied Fashion Design and Technology Qualification Code LMT 21706


Ten (10) units of competency are required to complete this qualification. Units must be selected according to the rules in the Certificate II in Applied Fashion Design and Technology.

3. All six (6) Core Units must be selected 4. Four (4) Specialist Units must be selected.


Core Units LMTCL2001A Use a sewing machine 30 LMTCL2003A Identify fibres and fabrics 40 LMTFD2001A Design and produce a simple garment 60 LMTFD2005A Identify design process for fashion designs 30 LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Specialist Units LMTCL2004A Sew components 50 LMTFD2004A Work within an Indigenous cultural framework 40

LMTFD2002A Apply printing techniques to produce Indigenous textile designs 80

LMTFD2003A Apply dyeing techniques to produce Indigenous textile designs 80

Support Units E1934 Supervised Skills Development 1 40 E1935 Supervised Skills Development 2 40

TOTAL 540 RTOs wishing to deliver this program will be required to negotiate for funding.


LMT30106 Certificate III in Textile Production

Qualification Title Certificate III in Textile Production Qualification Code LMT30106


Eighteen (18) units of competency are required to complete this qualification. Units must be selected according to the rules described below. 1. Four (4) Core units must be selected 2. Twelve (12) Specialist Units must be selected. Two (2) of those

Specialist Unit must be coded LMTTX3. A minimum of one (1) unit must be coded LMTTX3 or LMTGN3. A maximum of two (2) units may be coded MCM.

3. A maximum of two (2) Open Elective Units may be selected. Two units can be selected from: • Other Textile Production units at the AQF levels II, III & IV • Other TCF Training Package units at AQF levels II, III & IV • Other Training packages at AQF levels II, III & IV

Note: If Certificate II in Textile Production (Complex or Multiple Processes) has been achieved, an additional six units are required. All core units listed must be achieved – any Certificate III core units not achieved at Certificate II must be completed as part of the additional six units required for Certificate III. Units that have been credited towards lower level qualifications must not be selected in the additional six unit requirement. A minimum of three of the sic units must be selected from the specialist elective units coded LMTTX3 or LMTGN3.


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 LMTGN3002A Organise and plan own work to achieve planned outcomes 30 Specialist Units LMTGN2004A Work in a team environment 30 LMTGN2008A Coordinate work of team or section 30 LMTTX2008A Apply finishing processes to textile production 50 LMTTX2009A Weigh and check textile materials and products 20 LMTTX2014A Use specialised machinery to assist textile production 50


LMTTX2018A Restart machine after stoppage 60 LMTTX3001A Identify quality and types of textile fibres, yarns and fabrics 50 LMTTX3002A Contribute to textile production process improvements 40 LMTTX3004A Set up textile production machines for product change 60 LMTTX3006A Ensure efficient operation of textile machines 40 Open Elective Units LMTGN3002A Organise and plan own work to achieve planned outcomes 30

TOTAL 610


LMT30406 Certificate III in Textile Fabrication

Qualification Title Certificate III in Textile Fabrication Qualification Code LMT30406


Ten (10) units of competency are required to complete this qualification, in addition to the required units of competency from Certificate II in Textile Fabrication.

1. At least six (6) units must be selected from the Product Development and/or the Production fields as listed for Certificate III in Textile Fabrication.

2. Up to four (4) units may be selected form any field aligned to: • Certificate III in Textile Fabrication or • Certificate II, III or IV from another TCF Training

Qualification or • Certificate II, III or IV from another Training Package

Qualification. 3. For units identified by an asterisk *, competence in the

corresponding unit(s) at the lower level(s) or relevant underpinning knowledge and skills associated with these units will be acquired as part of the training program. (Refer to the Corresponding units Table at the front of this volume.)

4. Units imported from other Training Package qualifications may have prerequisites and these must be taken into account when developing a training program.



Core Units from Certificate I in Textile Fabrication LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units from Certificate I in Textile Fabrication LMTPRTF01AA Identify and handle materials 20 LMTPRTF02AA Lay out 20 LMTPRTF05AA Operate and maintain sewing machine - 1 24 Product Development Electives from Certificate II in Textile Fabrication LMTPDTF01AA Translate information into measurements and/or diagrams – 1 24 Production Electives from Certificate II in Textile Fabrication LMTPRTF01BA Identify and select materials - 1 40 LMTPRTF03AA Cut and shape - 1 24 LMTPRTF08AA Add accessories - 1 20 LMTPRTF14A Use hand tools 24 LMTPRTF15AA Inspect product - 1 20 Human Resources Electives from Certificate II in Textile Fabrication LMTGN2004A Work in a team environment 30 Product Development Electives from Certificate III in Textile Fabrication LMTPDTF02BA Measure, Scale and Undertake Geometric Construction - 2 60

LMTPDTF04BA Identify Customer Requirements and Gain Customer Acceptance 40



LMTPDTF05A Estimate and cost job 40 LMTPDTF03BA Produce Patterns for Three Dimensional Products 40 Production Electives from Certificate III in Textile Fabrication LMTPRTF01CA Identify and Select Materials - 2 20 LMTPRTF18A Provide customer service 20 Product Development AQF Level II Electives LMTPDTF02AA Measure, scale and undertake geometric construction - 1 20 LMTPDTF03AA Produce patterns for two dimensional products 20 LMTPDTF04AA Identify customer requirements (on site) 20 Production AQF Level II Electives LMTPRTF05BA Operate and maintain sewing machine – 2 24

TOTAL 600


LMT30506 Certificate III in Clothing Production [Special Needs] This program is restricted to students with special needs

Qualification Title Certificate III in Clothing Production Qualification Code LMT30506


Eighteen (18) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Certificate III in Clothing Production. 1. Four (4) Core Units must be selected 2. Twelve (12) Specialist Units must be selected. Two (2) of these

specialist units must be coded LMTCL3 and a minimum of one (1) unit must be coded LMTCL2 or LMTGN3. A maximum of two (2) units may be coded MCM.

3. A maximum of two (2) units may be selected. Two units can be selected from: • Other Clothing Production specialist units at the AQF levels II,

III & IV • Other TCF Training Package units at AQF levels II, III & IV • Other Training Packages at AQF levels II, III & IV

Note: If Certificate II in Clothing Production (Complex or Multiple Processes) has been achieved, an additional six units are required. All core units listed must be achieved – any Certificate III core units not achieved in Certificate II must be completed as part of the additional six unit required for Certificate III. Unit that have been credited towards lower level qualifications must not be selected in the additional six unit requirement. A minimum of three of the six units must be selected from the Specialist units coded LMTCL3 or LMTGN3.


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 LMTCL2003A Identify fibres and fabrics 40 Specialist Units LMTCL3010A Sew woven and stretch knit garments 40 LMTCL2004A Sew components 50 LMTCL2006A Press work 20 LMTCL2007A Lay up, mark and cut uncomplicated fabrics and lays 20 LMTCL2008A Finish garment production 20 LMTCL2009A Despatch work 10 LMTCL3001A Identify fabric performance and handling requirements 40 LMTCL3002A Prepare and produce sewn garment 60 LMTCL3003A Perform garment repairs and alterations 40 LMTCL3004A Press whole garments 20 LMTCL3005A Lay up and cut complicated fabrics and lays 30 LMTGN3002A Organise and plan own work to achieve planned outcomes 30 Open Elective Units LMTCL2001A Use a sewing machine 30 LMTCL2002A Provide hand sewing and finishing support 30 Support Units Y0278 Supervised Skill Practice 85



Y0291 Supervised Skills Practice 1 30 Y0290 Supervised Skills Practice 2 20 Y0315 Supervised Skills Practice 3 40

TOTAL 745


LMT30506 Certificate III in Clothing Production This program is suitable for a Clothing machinist

Qualification Title Certificate III in Clothing Production Qualification Code LMT30506


Eighteen (18) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Certificate III in Clothing Production. 4. Four (4) Core Units must be selected 5. Twelve (12) Specialist Units must be selected. Two (2) of these

specialist units must be coded LMTCL3 and a minimum of one (1) unit must be coded LMTCL2 or LMTGN3. A maximum of two (2) units may be coded MCM.

6. A maximum of two (2) units may be selected. Two units can be selected from: • Other Clothing Production specialist units at the AQF levels II,

III & IV • Other TCF Training Package units at AQF levels II, III & IV • Other Training Packages at AQF levels II, III & IV

Note: If Certificate II in Clothing Production (Complex or Multiple Processes) has been achieved, an additional six units are required. All core units listed must be achieved – any Certificate III core units not achieved in Certificate II must be completed as part of the additional six unit required for Certificate III. Unit that have been credited towards lower level qualifications must not be selected in the additional six unit requirement. A minimum of three of the six units must be selected from the Specialist units coded LMTCL3 or LMTGN3.


Core Units LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2003A Work in the Textiles, Clothing and Footwear industry 40 LMTCL2003A Identify fibres and fabrics 40 Specialist Units LMTCL2004A Sew components 50 LMTCL2010A Modify patterns to create basic styles 50 LMTCL2007A Lay up, mark and cut uncomplicated fabrics and lays 20 LMTCL2008A Finish garment production 20 LMTCL2011A Draw and interpret a basic sketch 25 LMTCL3001A Identify fabric performance and handling requirements 40 LMTCL3002A Prepare and produce sewn garment 60 LMTCL3005A Lay up and cut complicated fabrics and lays 30 LMTCL3012A Make marker for complicated fabrics and lays 40 LMTCL3013A Interpret patterns and apply pattern information 30 LMTFD3004A Draw a trade drawing for fashion design 30

LMTCL3009A Develop patterns from a block using basic pattern making principles 50

Open Elective Units LMTCL2001A Use a sewing machine 30 LMTCL3010A Sew woven and stretch knit garments 40 LMTFD2005A Identify design process for fashion designs 30

TOTAL 575


LMT30806 Certificate III in Footwear Repair

Qualification Title Certificate III in Footwear Repair Qualification Code LMT30806


Five (5) units of competency are required to complete this qualification, in addition to the required units of competency from Certificate II in Footwear Repair.

1. At least two (2) units must be selected from the Production field as listed in Certificate III in Footwear Repair.

2. Two (2) units may be selected form any field aligned to: • Certificate II or III in Footwear Repair and/or • Certificate II, III or IV from another TCF Training Qualification

and/or • Certificate II, III or IV from another Training Package

Qualification. 3. Units imported from other Training Package qualifications may




Elective Units – Production LMTPRFR08A Replace full sole and heel 40 LMTPRFR09A Operate sole stitcher 40 LMTPRFR10A Hand sew welt 40 LMTPRFR11A Re-cover footwear 40 Elective Units – Sales and Marketing WRRS2B Advanced on products and services 27

TOTAL 187


LMT31006 Certificate III in Hide, Skin and Leather

Qualification Title Certificate III in Hide, Skin and Leather Qualification Code LMT31006


Four (4) units of competency are required to complete this qualification, in addition to the required units of competency from Certificate II in Hide, Skin and Leather.

1. One (1) Core Unit is mandatory 2. At least two (2) units must be selected from the Production

field in Certificate III in Hide, Skin and Leather. 3. One (1) unit may be selected from any field aligned to: • Certificate II, III or IV in Hide, Skin and Leather or • Certificate II, III or IV from another TCF Training Package

Qualification or • Certificate II, III or IV from another Training Package. 4. For units identified by an asterisk *, competence in the

corresponding units(s) at the lower levels (s), or relevant underpinning knowledge and skills associated with these units, will be acquired as part of the training program. (Refer to the Corresponding Units Table at the front of Volume 1 of the Training Package)

5. Unit imported from other Training Package qualifications may have prerequisites, and these must be taken into account when developing a training program

6. A unit of competency chosen from outside the TCF Training Package should be consistent with the Competency Profile relevant to the trainee and/or enterprise (see Users Guide for examples) and must not have been achieved at a lower level qualification.


Core Units from Certificate II in Hide, Skin and Leather LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 LMTGN2005A Perform minor maintenance 30 LMTGN2010A Perform tasks to support production 30 Production Electives from Certificate II in Hide, Skin and Leather LMTPRHL03A Operate machines to prepare hides or skins for tanning 60 LMTPRHL07A Operate machines to crust hides, skins or leather 60 LMTPRHL11A Trim hides, skins or leather 40 Human Resources from Certificate II in Hide, Skin and Leather LMTGN2004A Work in a team environment 30 Core Units from Certificate III in Hide, Skin and Leather LMTPRHL14A Perform tests 40 Production Electives from Certificate III in Hide, Skin and Leather

LMTPRHL01A Undertake Receival, Storage, Handling And/or Preservation of Materials or Products 40

LMTPRHL10A Finish hides, skins or leather 60 LMTGN2006A Perform test or inspection to check product quality 40

TOTAL 480


LMT31106 Certificate III in Laundry Operations

Qualification Title Certificate III in Laundry Operations Qualification Code LMT31106


Four (4) units of competency are required to complete this qualification, in addition to the required units of competency from Certificate II in Laundry Operations.

1. One (1) core unit is mandatory 2. At least two (2) units must be selected from the Production

field as listed in Certificate III in Laundry Operations 3. One (1) unit may be selected from any field aligned to: • Certificate II or III in Laundry Operations or • Certificate II, III or IV from another TCF Training Package



have prerequisites, and these must be taken into account when developing a training program.

5. A unit of competency chosen from outside the TCF Training Package should be consistent with the Competency Profile relevant to the trainee and/or enterprise (see Users Guide for examples) and must not have been achieved at a lower level qualification.


Core Units from Certificate I in Laundry Operations LMTPRLA01A Collect, receive and sort product 30 LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Elective Units from Certificate I in Laundry Operations LMTPRLA02A Operate washing machines 40 Production Electives from Certificate II in Laundry Operations LMTPRLA06A Perform Conditioning And/or Drying Processes 40 LMTPRLA07A Operate finishing equipment 50 Core Units from Certificate III in Laundry Operations BSBFLM412A Promote team effectiveness 40 Production Electives from Certificate III in Laundry Operations LMTPRLA03A Control washing machine operation 40 LMTGN3002A Organise and plan own work to achieve planned outcomes 30 LMTPRLA11A Coordinate and process products for storage or despatch 50

TOTAL 370


LMT31206 Certificate III in Dry Cleaning Operations

Qualification Title Certificate III in Dry Cleaning Operations Qualification Code LMT31206


Four (4) units of competency are required to complete this qualification in addition to the required units of competency from Certificate II in Dry Cleaning Operations.

1. At least two (2) units must be selected from the Production field as listed in Certificate III in Dry Cleaning Operations.

2. One (1) unit may be selected from any field aligned to: • Certificate II or III in Dry Cleaning Operations or • Certificate II, III or IV from another TCF Training Package



have prerequisites, and these must be taken into account when developing a training program.



Elective Units – Production LMTPRDC01A Provide customer service 80 LMTPRDC05A Operate wet cleaning machines 60 LMTPRDC08A Carry out final inspection of articles 60 LMTPRDC09A Control dry cleaning production 130

TOTAL 330


LMT31406 Certificate III in Applied Fashion Design and Technology [Indigenous]

(This Training Program is specialised for Indigenous and/or Regional students)

Qualification Title Certificate III in Applied Fashion Design and Technology Qualification Code LMT31406


Eighteen (18) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Certificate III in Applied Fashion Design and Technology. 1. All eleven (11) Core units must be selected 2. A minimum of five (5) Specialist units must be selected 3. A maximum of two (2) Open Elective units may be selected

Two units can be selected from: • Clothing Production specialist units at AQF levels II, III & IV • Other TCF Training Package units at AQF levels II, III & IV • Other Training Packages at AQF levels II, III & IV

Note: If Certificate II in Applied Fashion Design and Technology has been achieved, an additional eight units are required. All core units listed must be achieved. Any Certificate III core units not achieved at Certificate II must be completed as part of the additional eight units required for Certificate III. Units that have been credited towards lower level qualifications must not be selected in the additional eight unit requirement.


Core Units LMTCL2001A Use a sewing machine 30 LMTCL2004A Sew components 50 LMTCL2003A Identify fibres and fabrics 40 LMTCL2010A Modify patterns to create basic styles 50 LMTCL2011A Draw and interpret a basic sketch 25 LMTCL3001A Identify fabric performance and handling requirements 40 LMTFD2001A Design and produce a simple garment 60 LMTFD2004A Work within an Indigenous cultural framework 40 LMTFD2005A Identify design process for fashion designs 30 LMTGN2001A Follow defined OH&S policies and procedures 20 LMTGN2002A Apply quality standards 30 Specialist Units LMTCL3002A Prepare and produce sewn garment 60 LMTCL3003A Perform garment repairs and alterations 40 LMTCL3007A Embellish garment by hand or machine 40 LMTFD3002A Design and produce Indigenous printed textiles to a brief 80 LMTFD3003A Prepare design concept for a simple garment 40 Open Elective Units

LMTFD2002A Apply printing techniques to produce Indigenous textile designs 80

LMTFD2003A Apply dyeing techniques to produce Indigenous textile designs 80

TOTAL 835


LMT40306 Certificate IV in Clothing Production

Qualification Title Certificate IV in Clothing Production Qualification Code LMT40306


Seven (7) units are required to complete this qualification. 1. At least two (2) units must be from the Product Development

field and/or the Production field. 2. Up to two (2) units may be selected from any field aligned to:

• Certificate III in Clothing Production, additional to units already achieved; and/or

• Diploma of Textile, Clothing and Footwear; and/or • Certificate III, IV or Diploma from other Training Package

Qualifications. 3. The remaining unit/s may be selected from any field in

Certificate IV in Clothing Production. 4. Units of competency chosen from outside the TCF Training

Package should be consistent with the Competency Profile relevant to the trainee and/or the enterprise (see Users Guide for examples), and must not have been achieved at a lower level qualification.

5. There are no prerequisites or corresponding units as listed in the 'Units of Competency' for this qualification. However, each available unit of competency has significant relevant underpinning knowledge and skills that need to be taken into account when developing training programs.

6. Units imported from other Training Package Qualifications as listed may have prerequisites. These pre-requisites must be taken into account when developing a training program.


Elective Units – Production

LMTPRCL15A Organise and plan own work in a home based/outside factory environment 80

LMTPRCL11A Grade patterns 115 LMTCL3012A Make marker for complicated fabrics and lays* 40 LMTPRCL14A Assemble/fit custom made/bespoke garments 80 Elective Units – Product Development LMTPDCL01A Assist in Preparation of Preliminary Design Concepts 135 LMTPDCL02A Assist with development of design 126 Elective Units – Purchasing TDTR298B Source goods/services and evaluate contractors 30

TOTAL 766 * LMTGN2002A Apply quality standards is a pre-requisite for this unit


LMT41006 Certificate IV in Applied Fashion Design and Technology

Qualification Title Certificate IV in Applied Fashion Design and Technology Qualification Code LMT41006


Twenty four (24) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Certificate IV in Applied Fashion Design and Technology. 1. All seven (7) Core Units must be selected. 2. A minimum of fourteen (14) Specialist Units must be selected 3. A maximum of three (3) units may be selected.

Three units can be selected from: • Other Applied Fashion Design and Technology specialist units

at the AQF levels III, IV & V • Other TCF Training Package units at AQF levels III, IV & IV • Other Training Packages at AQF levels III, IV & V

Note: If Certificate III in Applied Fashion Design and Technology has been achieved, units completed can be credited towards this qualification if they are listed in the Certificate IV in Applied Fashion Design and Technology.


Core Units LMTCL2003A Identify fibres and fabrics 40 LMTCL2011A Draw and interpret a basic sketch 25 LMTCL3001A Identify fabric performance and handling requirements 40 LMTFD2005A Identify design process for fashion designs 30 LMTFD4001A Apply design studio process 60 LMTFD4006A Interact and network with fashion industry participants 60 LMTGN2001A Follow defined OH&S policies and procedures 20 Specialist Units


LMTCL3009A Develop patterns from a block using basic patternmaking principles 50

LMTFD3004A Draw a trade drawing for fashion design 30

LMTFD4002A Apply principles of colour theory to fashion design development 25

LMTFD4003A Assist in preparation of preliminary design concepts 50 LMTFD4004A Calculate cost estimates for fashion products 20 LMTFD4011A Cut fabrics for prototype designs 20 LMTFD4012A Develop product specifications for fashion design 20


LMTFD4016A Sew design prototypes 60 LMTFD4019A Use colourisation techniques on fabrics 30 LMTFD4020A Use electronic fashion design tools 40 LMTFD4021A Drape fabrics to make patterns 40 LMTGN2009A Operate computing technology in a TCF workplace 20 Open Elective Units LMTCL3010A Sew woven and stretch knit garments 40 LMTCL2001A Use a sewing machine 30



LMTCL2004A Sew components 50 TOTAL 870


LMT50106 Diploma of Textiles Clothing and Footwear

Qualification Title Diploma of Textiles Clothing and Footwear Qualification Code LMT50106


Seven (7) units of competency are required to complete this qualification, in addition to the required units of competency from:

• Certificate IV in Textile Production or • Certificate IV in Clothing Production or • Certificate IV in Footwear Production or • Certificate IV in Hide Skin and Leather 1. At least three (3) units must be selected from the Product

Development and/or the Production field aligned to the Diploma of Textiles Clothing and Footwear.

2. Up to two (2) units must be selected from any field as listed in the Diploma of Textiles Clothing and Footwear

3. Up to two (2) units may be selected from any field aligned to: • Certificate IV and/or Advanced Diploma from the TCF

Training Package Qualifications and/or • Certificate IV and/or Advanced Diploma from another

Training Package Qualification. 4. There are no prerequisites or corresponding units as listed in

the 'Units of Competency' for this qualification. However each available unit of competency has significant relevant underpinning knowledge and skills that need to be taken into account when developing training programs.

5. Units imported from other Training Package Qualifications may have prerequisites, and these must be taken into account when developing a training program.

6. A unit of competency chosen from outside the TCF Training Package should be consistent with the Competency Profile relevant to the trainee and/or the enterprise (see Users Guide for examples).


Elective Units – Product Development LMTPDCL07A Produce made to measure custom made/bespoke garments 250 LMTPDTX05A Participate in the development of design concept 100 LMTPDHL04A Contribute to the Development of Products or Processes 100 LMTPDHL05A Participate in development of design concepts 100 Elective Units – Production LMTPRGN14A Provide global operations support 100 LMTPRGN07A Plan production 100 Elective Units – Sales and Marketing LMTSMGN01A Develop and implement a sales and marketing strategy 100

TOTAL 850


LMT50306 Diploma of Applied Fashion Design and Technology

Qualification Title Diploma of Applied Fashion Design and Technology Qualification Code LMT50306


Thirty four (34) units are required to complete this qualification. Units must be selected according to the rules described in the Diploma of Applied Fashion Design and Technology. 1. All seven (7) Core Units must be selected 2. A minimum of twenty four (24) Specialist Units must be selected 3. A maximum of three (3) Open Elective Units may be selected

Three units can be selected from: • Other Applied Fashion Design and Technology specialist units

at AQF levels IV, V & VI • Other TCF Training Package units at AQF levels IV, V & VI • Other Training Packages at AQF levels IV, V & VI

Note: If Certificate IV in Applied Fashion Design and Technology has been achieved, an additional 10 units of competency are required to gain the Diploma of Applied Fashion Design and Technology. All core units must be achieved and any Diploma core units not achieved at Certificate IV must be completed as part of the additional 10 units required for the Diploma. Units that have been credited towards lower level qualifications must be not be selected in the additional 10 unit requirement.


Core Units LMTCL2003A Identify fibres and fabrics 40 LMTCL3001A Identify fabric performance and handling requirements 40 LMTFD3004A Draw a trade drawing for fashion design 30 LMTFD4001A Apply design studio process 60 LMTFD4006A Interact and network with fashion industry participants 60 LMTFD4012A Develop product specifications for fashion design 20 LMTGN2001A Follow defined OH&S policies and procedures 20 Specialist Units LMTFD4013A Grade 2D patterns 80


LMTCL2011A Draw and interpret a basic sketch 25

LMTCL3009A Develop patterns from a block using basic patternmaking principles 50

LMTFD2005A Identify design process for fashion designs 30

LMTFD4002A Apply principles of colour theory to fashion design development 25

LMTFD4003A Assist in preparation of preliminary design concepts 50 LMTFD4004A Calculate cost estimates for fashion products 20

LMTFD4010A Create pattern to meet design specifications applying advanced patternmaking principles 80

LMTFD4011A Cut fabrics for prototype designs 20


LMTFD4015A Create pattern from block to meet customer specifications 50 LMTFD4016A Sew design prototypes 60 LMTFD4019A Use colourisation techniques on fabrics 30



LMTFD4020A Use electronic fashion design tools 40 LMTFD4021A Drape fabrics to make patterns 40 LMTFD5007A Analyse influences on contemporary fashion designs 50

LMTFD5010A Develop and present design concepts within specific guidelines 60

LMTFD5011A Produce fashion illustrations 70 LMTFD5015A Develop patterns for complex fashion garments 90 LMTFD5017A Apply design studio processes to meet client brief 90 LMTFD5018A Determine and specify advanced construction processes 90 LMTGN2009A Operate computing technology in a TCF workplace 20 Specialist Units – Select one (1) of the following units LMTFD5002A Develop and test patterns for bras and swimwear 50 LMTFD5005A Manipulate fabrics to create new finishes 60 Open Elective Units LMTCL3010A Sew woven and stretch knit garments 40 LMTCL2001A Use a sewing machine 30 LMTCL2004A Sew components 50

TOTAL 1590


LMT60306 Advanced Diploma of Applied Fashion Design and Technology

(This Training Program assumes that the Diploma of Applied Fashion Design and Technology has been achieved)

Qualification Title Advanced Diploma of Applied Fashion Design and Technology Qualification Code LMT60306


Forty four (44) units of competency are required to complete this qualification. Units must be selected according to the rules described in the Advanced Diploma of Applied Fashion Design and Technology. 1. All twelve (12) Core Units must be selected 2. A minimum of twenty six (26) Specialist units must be selected 3. A maximum of six (6) Open Elective Units may be selected

• Units selected from TCF Training Package at AQF levels V & VI

• Units selected from other Training Packages at AQF levels V & VI

Note: If the Diploma of Applied Fashion Design and Technology has been achieved, an additional 10 units of competency are required to gain the Advanced Diploma of Applied Fashion Design and Technology. All core units must be achieved and any Advanced Diploma core units not achieved at the Diploma must be completed as part of the additional 10 units required for the Advanced Diploma. Units that have been credited towards lower level qualifications must not be selected in the additional 10 unit requirement.


Core Units from Diploma of Applied Fashion Design and Technology LMTGN2001A Follow defined OH&S policies and procedures * 20 LMTCL2003A Identify fibres and fabrics * 40 LMTCL3001A Identify fabric performance and handling requirements * 40 LMTFD3004A Draw a trade drawing for fashion design * 30 LMTFD4006A Interact and network with fashion industry participants * 60 LMTFD4012A Develop product specifications for fashion design * 20 LMTFD4001A Apply design studio process * 60 Core Units from Advanced Diploma of Applied Fashion Design and Technology LMTFD6001A Evaluate commercial viability of designs 60 LMTFD6002A Manage product development of fashion designs 60 LMTFD6003A Manage fashion design process 80 LMTFD6006A Develop a fashion range 90

LMTFD6008A Apply studio processes to create and produce designs for commercial production 90

Specialist Units LMTFD5009A Cost design production 40 LMTFD6007A Implement specialised patternmaking technologies 100 LMTGN6001A Develop and implement a sales and marketing strategy 60 Open Elective Units LMTPRCL14A Assemble/fit custom made/bespoke garments 80

LMTPRCL15A Organise and plan own work in home-based/outside factory environment 90

TOTAL 750 * Core units achieved in the Diploma of Applied Fashion Design and Technology. Hours for these units have not been included in the total.

Documents

TEXTILES, CLOTHING & FOOTWEAR TRAINING PACKAGE PURCHASING ... v… · TEXTILES, CLOTHING & FOOTWEAR TRAINING PACKAGE PURCHASING GUIDE LMT00 Version 3 Western Australian Department