Upload
vunhi
View
226
Download
0
Embed Size (px)
Citation preview
Automotive Aeronautics Railway TelecomsSpaceLife
SciencesServices &
Information Systems Oil & Gas Energy Defense ConsultingNaval
THE EDRIVE SYSTEM TEST STANDPowertrain testing under real conditions
At the test center in Mönsheim near Stuttgart, MBtech, the automotive competence center of the AKKA Group, has an ultramodern system test stand for electric and hybrid vehicles. This drive system test stand combines the test methods from the fi elds of electrics/electronics and powertrain development to create an innovative solution.
TECHNICAL CONFIGURATION OF THE TESTING INFRASTRUCTURE Two test chambers can be operated in parallel Chamber 1: “Vehicles & Systems” for the testing of drive systems, complete powertrains and cars
Chamber 2: “Systems & Components” for the testing of systems and electrical components (e.g. HV batteries or charging systems)
The temperature in the two chambers can be set individually in the range from -30 to +50°C
Hotbox up to 140°C
MBTECH „ROAD TO RIG TESTSYSTEM“ A NEW WAY OF TESTINGIt is now possible for the fi rst time at MBtech to test the overall behavior of the (e)Drive powertrain in combination with the rest of the vehicle electron-ics before the vehicle test, and that under real conditions: The powertrain can be loaded identically to the road operation, for example by analogy with a summer or winter test. A realistic validation is thus possible with far fewer development vehicles. In view of the high expenditure for vehicle mock-ups and their worldwide operation and support, this represents a signifi cant saving in costs and time.
OUR ADDED VALUE
Know-how for the development and tes-ting of electrical systems and components
Customised mock-ups, implementation and evaluation
Flexible testing: 24 h / 7 days a week
Reduced set-up and tooling times
WE OFFER VARIOUS OPERATOR MODELS
Service: Book test stand capacity with us for your development projects. We provide the test infrastructure.
Sub-project: For longer development pro-jects, you can use our competence for e.g. further test preparation and evaluation.
Overall project: Your one-stop provider. We handle the development and validation of complete packages on the test stand for you.
CHAMBER 2: TEST STAND FOR EDRIVE COMPONENTS SYSTEMS
CHAMBER 1: A TEST STAND FROM THE COMPONENT THROUGH TO THE WHOLE SYSTEM / VEHICLE
SPECIALIZATION / ORIENTATION Electric vehicles with/without range extender Fuel cell vehicles Hybrid vehicles Conventional drive concepts Flexible use: testing of powertrain or complete vehicle
TEST STAND FOR VEHICLES AND DRIVE SYSTEMS Two load machines with up to 440 kW per axle Max. torque at the wheel up to 3500 Nm Speed at the wheel up to 3000 rpm Variation of the chamber temperature from -30°C to +50°C Very high control dynamics with up to 10 kHz High-voltage supply with up to 630 kW (battery simulator) Mains simulation for charge regulator test Several cooling circuits representable Airstream simulator up to 150 km/h
SPECIALIZATION HV batteries incl. simulation HV charging systems Combination of components
TEST STAND FOR ELECTRICAL COMPONENTS AND SYSTEMS Battery simulation 400 kW/600 A (continuous), briefl y 530 kW (1 min)/630 kW (5 sec) Voltage range from 5 to 1000 VDC Variation of the chamber temperature from -30°C to +50°C Control precision: +/- 0.2% of limit value Output current max. 1200 A (1 min)
MISCELLANEOUS
TEST STAND ENVIRONMENT Assistance systems in the vehicle remain active on the test stand Reproducible test scenarios Programming of test sequences according to customer profi les Comprehensive measurement data acquisition Evaluation and processing of measurement data Effi cient automation system Installation and support of additional measuring equipment
POTENTIAL APPLICATIONS Function development and validation of drives or drive components Development for driver assistance systems in longitudinal dynamics Temperature validation for components and complete systems Automated endurance tests and long-term testing
CONVINCE YOURSELF OF OUR OFFERING DIRECTLY DURING A VISIT TO THE EDRIVE SYSTEM TEST STAND IN MÖNSHEIM NEAR STUTTGART.
FULL VEHICLE
L-A
SP-2
0161
1I02
-EN www.mbtech-group.com
www.akka-technologies.com
Contact
MBtech Group GmbH & Co. KGaAPosener Straße 1D-71065 Sindelfi ngen
OVERALL SYSTEM
COMPONENT SET UP
MBtech Group GmbH & Co. KGaASalierstraße 36D-70736 Fellbach
Tel: +49 7031 686-3000E-Mail: [email protected]