Upload
hoanganh
View
232
Download
5
Embed Size (px)
Citation preview
THE HOW-TO GUIDE
Add Nest Learning Thermostat™ and Nest Protect: Smoke + Carbon Monoxide™ to Scout
-Step-by-step instructions to integrate Nest with Scout-
If you have a Scout system and Nest products you can integrate them to control them from one place: your Scout account. To setup the integration, login into your Scout account on your iPhone app, Android app or on the web, and follow the steps outlined in this document.
1. Go to your Devices page 2. Select Works with Nest under Integrations:
6. After selecting the Nest Location you want to add, based on the Nest devices you own, you will see your Nest devices populate below. For example, below you can see two Nest Protects for this Nest Location:
7. If you have Nest Protect(s), you can select the Nest Protect(s) you want associated with your Scout location:
8. Scroll down on the same page and if you have Nest Thermostat(s), you can select AWAY/HOME based on the Scout modes you have setup. For example, if you want your Nest Thermostat to be set to Away when your Scout is set to Away mode, select Away:
*Please note: “Home on Disarm” will set your Nest Thermostat to Home state when you disarm any Scout mode.
10. In your Activity Feed, you will see your Nest Protect pairing notification. If your integrated Nest Protect is triggered, they will now appear in your Activity Feed. Here is an example of what that will look like during a carbon monoxide detection. This will be the same type of notification you will see if smoke is detected:
11. Now when you go into your edit a Mode, you can add your integrated Nest Protect to your Scout Mode. If Nest Protect is triggered, it will trigger the “Then” reaction defined in that mode.