Upload
lynga
View
236
Download
5
Embed Size (px)
Citation preview
THE IEM
PROFESSIONAL
INTERVIEW
By Ir. Prof Ishak bin Abdul Rahman
Route to MIEM /
Professional Engineer
Pre-requisite to sit for the IEM
Professional Interview
Completed an engineering degree programme accredited by IEM.
Completed at least 3 years of experience in planning, design, execution or management of such works as are comprised within the profession of an Engineer.
RECOGNISED TRAINING
Mentor Selected by IEM
Training
Same Organisation
Same discipline
Use IEM
Log Book - Regularly
Certification of
Graduate's Work
Meet Mentor Regularly and
Certification
Submission to IEM for
Endorserment once a year
Organisation Without
P.Eng
Graduate Engineer Organisation with
P.Eng
PRACTICAL TRAINING
•Must be under the supervision of a Professional Engineer who is in the same discipline as the candidate.
No relevant PE supervising
me !!
What do you mean!! •Experience should be acquired in
design and site besides application of engineering science and knowledge.
CIVIL ENGINEERING
CANDIDATES
Candidates are required to have:
At least twelve months of design
experience
At least twelve months of site experience
ELECTRICAL ENGINEERING
CANDIDATES
Candidates are required to have:
At least TWELVE months of design
experience
At least SIX months of site experience
ELECTRONIC ENGINEERING
CANDIDATES
Candidates are required to have:
At least SIX months of design experience
At least TWELVE months of site experience
OTHER DISCIPLINES
Candidates are required to have:
At least six months of design
experience
At least six months of site experience
Design Experience
means the period, in man months, of
training and experience that the candidate
spends in an office environment to plan,
manage and execute design work,
feasibility study, research and
development work, or operation and
maintenance work.
Back
Site Experience
Means the period of training and
experience of the candidate during which he
spends his time in the site/field either
supervising an engineering work, conducting
his research and development work, or being
involved in operation and maintenance work.
Site/field experience shall not
consist merely of periodical and
routine site/field inspections,
attending site meetings.Next
Site Experience contd…
shall have to include activities
which demonstrate engineering proficiency
and competency like trouble-
shooting, site situational
problem solving, clarifying of
design uncertainties, proposing
of better alternative designs,
reviewing parameters and improving work
procedures and standard practice, surveys,
material testing and work sequencing.Back
RESEARCH CANDIDATE
1. be engaged in engineering research work at the time of application.
2. have been engaged, in a responsible position, on engineering research for a period of at least 2 years.
3. have had in addition to (2) above, either
A) not less than 4 years experience which may include:
- UP TO 1 YEAR APPROVED POST GRADUATESTUDY
- UP TO 3 YEARS ON RESEARCH FOR HIGHERDEGREE
- RESEARCH WHILST BEING A TEACHER
OR
B) not less than 3 years practical experience of which not less than 2 years have been in investigation, planning design, construction or management of engineering works.
TEACHER IN ENGINEERING
* ENGAGED IN TEACHING AN APPROVED ENGINEERING DEGREE OR ADVANCED DIPLOMA AT THE TIME OF APPLICATION
* HAVE BEEN ENGAGED IN TEACHING THEFINAL 2 YEARS OF THE ENGINEERING DEGREE COURSE FOR A PERIOD OF AT LEAST ONE YEAR
* 1 YEAR EQUIVALENT PRACTICAL EXPERIENCE
PLUS
PLUS
Not less than 3 years’ experience which may
include:
- an approved course of full time post-graduate
study
OR
- on research for the award of a higher degree
OR
- research done whilst holding the position of
teacher in an approved degree course