Embed Size (px)
Citation preview
The IMMORTALITY X
User Manual
By
Precious Ngwu
Customer Support: www.PagedSupport.com
Hey
Precious here and thank you for jumping onboard with us on
Traffic Elixir. This manual is meant to layout the perfect guidelines
on how to get great results with Traffic Elixir and The
IMMORTALITY X version.
I’m going to get straight to the point and make everything super
quick for you, so you can start setting up your campaigns and
getting some serious traffic coming to your website in the next few
days.
As you already know, especially with any online traffic systems,
there are usually safe practices to adopt for the best result. I will
also be sharing that with you in this user manual.
NOTE: this software is setup to work perfectly only when installed
on the root domains and not directories. Which means something
like your Wordpress site at www.trafficelixir.com and not your
Wordpress site at www.trafficelixir.com/blog.
PRIMING YOUR ACCOUNTS Traffic Elixir; this software works with Google+ communities to
generate its traffic, which is very hot right now. It works for any
niche
The first step to setting up your campaign is priming your account.
Start by creating your Google account:
https://accounts.google.com/
Then sign in to Google+: https://plus.google.com/
Once, you’re inside Google+, go to the communities section.
https://plus.google.com/communities
Then, search for the communities you want to infiltrate based on
your niche.
For example, you are in the “pet” niche and probably, you have a
site where you sell items for cats like toys, clothing, foods and
whatnot. Since you need to promote the site to sell your products
or build your cat lovers list, in Google+ communities, you can
search for terms like “CATS”.
After searching, you will see a bunch of “cat” related communities;
many of which have millions of users (that is your free traffic
waiting right there for you to pick up).
The cool thing about Google+ is that unlike other social networks,
to join these communities is a breeze, no need to wait for
approval.
Rarely, you might run into locked communities which is less
than1%; so, you should be good.
Joining the communities is as simple as click, click, click…
After joining, it will now look like this (you’re now a member of the
community and can unleash the power of Traffic Elixir on them).
Follow this simple step and join as much communities you want
and get ready to go super elixir on all of them.
SAFE BETS TO PRIMING YOUR ACCOUNTS
1. The more communities you join, the more traffic you will
generate.
2. To get better traffic, do not bother with communities that
have low number of members especially those with less than
100 members. In my experience, they are not worth it.
3. Do not use 1 Google+ account to join and post in like 200
communities in the same niche if you want to be play safe.
What you should do is, take for example10 accounts and
break it down to 20 communities per account.
That is your safety net.
If you are in multiple niches like “pet, fitness and marketing” and
you have 10 Google+ accounts to use and you want to join at least
200 communities in each niche.
It will become a total of 600 communities, which means that each
of the accounts will get 60 communities assigned to it. (20 on pet,
another 20 fitness and the other 20 on marketing per account).
So, do not use one account to join hundreds of communities in
one niche, you need to evenly space it out. Even if each of your
accounts joined 100s of communities, let it be across different
niches.
THE ASSOCIATION WITH IMMORTALITY X The advanced Immortality X version comes loaded with 4 extra
integrations…
- Tumblr
So, you need to set them up as well.
Facebook: the safety net applying to Google+ also applies to
Facebook, don’t pack everything in one account.
Join different groups in the niche you want across multiple
accounts.
Tumblr: for this community, the software will only work for blogs
you own and group blogs you’re a member of, this part is too easy.
You can get multiple blogs up and running but we recommend
group blogs as that is where the real traffic is at in Tumblr.
The key for having Tumblr in Immortality X is not because of the
instant traffic but the overall social dominance it helps you
establish in your community and getting Tumblr traffic to Tumblr
blogs inside Tumblr is just too easy.
Twitter: with twitter, comes the great social exposure and then
some… what you want here is to have multiple social accounts
running under you and touting your content all there all the time.
The key here is using HASHTAGS that are getting traffic, popular
hashtags and probably trending hashtags as well and get in the
mix, I will tell how to leverage these hashtags in Traffic Elixir –
IMMORTALITY X.
Pinterest: again, just like Twitter, the key here is the hashtag as well
but unlike other social communities, you just need 1 account here
to make the magic happen
LOADING UP YOUR ELIXIR Once everything is setup, you have created Google+ accounts and
joined lots of Google+ communities in your niche, the next step is
loading everything inside Traffic Elixir.
I believe by now you must have installed and activated the plugin
on your site.
First thing you need to do is go to Manage Accounts inside Traffic
Elixir…
You should have something like the below.
What you need to do here is authorize all the Google+ accounts
you want to use with the plugin.
NOTE: make sure that you’re signed in to the Gmail/Google+ for
any new account you want to authorize
But before that, you need to click on this link to allow your
Google+ account to connect to new apps (VERY IMPORTANT)
https://www.google.com/accounts/UnlockCaptcha
The link above should take you to a page like the below
You just have to click the “CONTINUE” button and you’re done.
Next, go back to the manage accounts section of Traffic Elixir, click
on the “Authorize Google+ Account” button and a pop up screen
will appear, you enter your login details and click the Add button
just as you see below.
And that’s it, you’re done.
The cool thing about our plugin is that you can load up as many
accounts as you wants, there’s just no limit. We help you max out
your potential, that is our goal. So, enjoy it.
Now, you are done with authorizing accounts.
Time to really hit things up.
You click on Sleeper Infiltration.
Over at “Sleeper Infiltration” tab, this is where you segment the
communities in the software so that the software infiltrates only
the targeted communities on each campaign and you get the most
targeted visitors.
Think of it as, if you collect leads, you need to segment them to
stuff like my SEO list, my WP plugin list, my Facebook marketing
list. That way, you will always send targeted promos to each list for
the maximum ROI. That is exactly what we did here for you.
We want you to get the best results possible.
The next thing to do is select the Google+ account to work with.
Once you’ve selected an account, the communities in that account
will load and it’s now time to segment them into what we call
boards or packs.
The next step is to create a board.
Click on the “Create a new board” button, add any name you want
to use and remember the board, then save.
After saving, your new board will show up with 0 communities in it.
Now, it’s time to add communities into it…
Basically, all you do is check boxes of communities you want to be
inside this box and there’s also a check all function…
Once you are done, click on Save Infiltration and you are good to
go.
The communities you checked will now be added to the board.
Now, the cool part is that you can create unlimited boards in each
account. Maybe, I can create another board called pet lovers and
add the communities on pets to it.
Once you are done with that account, switch over to the next
account and do exactly the same thing until you are done with all
of them.
Now, you are solid.
THE ASSOCIATION WITH IMMORTALITY X The other networks work just as Google+ but with a little
difference in setting them up, other than that… everything else
remains the same.
Facebook: you need to first setup an app…
NOTE: you only need to set this up once and that’s it.
Even though you have 100 Facebook accounts you want to
integrate with this app, you just need to configure the Facebook
App Settings for only one account and that’s it.
Watch this video to see how to configure Facebook app ->
https://www.youtube.com/watch?v=HIf0JW7JhcE, you can also read
this for more idea -> http://support.qualityunit.com/172666-How-
tosetup-Facebook-application
Once you’re done, just enter your App ID and App Secret into
Traffic Elixir and save.
Then follow the other steps just as listed in Google+ to authorize
your Facebook accounts and build your group packs.
Tumblr: just as with Facebook, you need to setup Tumblr App ID
first…
The good part is that we literally laid down the instructions for you
on the page.
So, just go over to Tumblr and go to the TUMBLR APP SETTINGS
sub section and you’ll see exactly what you need to do.
Remember, you only need to set this up once for you just one
account and then you can authorize as much Tumblr
accounts/blogs as you want.
Pinterest: this one is way too easy, just click on the authorize
button then add your login email and password and you’re good
to go.
Twitter: just as Pinterest, this is very easy. Comes with 1 way
authentication and you can add as much as you need. Just click the
authorize button and takes you to Twitter for login authentication.
CONFIGURING EXTRA SETUPS Once you finish your setup, just click on the step next button at
bottom right to move on.
The next section is Spin Rewriter.
Firstly, I want to remind you that this feature is optional (though
recommended) but Traffic Elixir does not need nor depend on this
feature to function properly.
However, it is highly recommended you integrate a Spin Rewriter
account. This will help in spinning your content published in the
communities so that each one can look unique.
If you do not have an account with Spin Rewriter yet, then click on
the red button that says “Buy Spin Rewriter Now” to get your
membership, it is affordable and will be useful in your overall
online business. It is one of the marketing tools that we have used
for a long time.
If you already have an account, just click on the green button.
You will be taken to the activation page where you enter your
API key, and login. To get your API key, click on the green text
“Click here to see your API key”. It will redirect to Spin Rewriter
website where you need to log in to see your key.
That is it. You are connected.
At this point, you are now ready to set up your campaign.
RUNNING YOUR CAMPAIGN
To setup your campaign, you need go to the Traffic Elixir
dashboard…
In the dashboard, click the Create button to setup your new
campaign.
Once the page opens, put your campaign name (you can call it
anything you want). Choose if you want to promote a post or page
then select the specific post or page to promote.
Then click the “next” button…
In this section, you setup the community packs you want to
infiltrate.
Just select an account and check a community pack in the account
that you want.
You can do this for multiple accounts and multiple community
packs in each campaign.
Also, if you want the campaign submitted to profiles, then check
the boxes in the profile section.
Note that profile submission do not have much effect on campaign
results.
Next, enter your message. This should be a sentence of 1 or 2 lines
that will accompany your community update.
You can also spin it internally (this will only work if you have
connected Spin Rewriter) or you can use an externally spun text
(from any other spinning application) here.
To spin internally, you just click the spin button at top right…
After spinning, it should look like this
This is recommended so that you can post unique messages to
each of the communities.
The next step is to add media, I’m sure you’re pretty much aware
that media rich contents get the best engagement
In Traffic Elixir, you can add either an image or a YouTube video.
If you are adding an image, it’s best to use images with no
“percentage (%)” sign in the URL.
You can also preview or add new message class.
Preview will show you what you have set up so far.
While “Add New Message Class” will add another setup message
box in the campaign so that can add extra message or media with
probably different and unique approach.
This feature is so great and effective for you uniqueness and
diversity in your campaign ensuring the best results.
When done, you click on the “next” button to wrap up your
campaign with the final settings.
THE ASSOCIATION WITH IMMORTALITY X For Facebook and Twitter, they function just as Google+.
The only ones with a little bit of changes are Pinterest and Tumblr.
EXTRA CAMPAIGN SETTINGS
I am going to walk you through it all now.
Start Infiltrating: this is the date and time that the campaign should
start running.
To make sure your campaign runs successfully, always ensure that
you setup your time few minutes ahead of your standard
WordPress time.
To know you current WordPress time, go to “Add New Post” (in
your WordPress site); once the page opens, go to the publish sub-
section on the right and click the Edit link beside the “Publish
immediately” text.
Right here, you will see your current WordPress time, from the
example above, it is 05:35, I might set my campaign to start around
05:40 (5 minutes ahead).
Min. Infiltration time: This is set to 5 minutes by default. Please, do
not reduce it below 5 minutes. I will even advise you don’t touch it.
Max. Infiltration time: by default set at 60 minutes, you can just
leave it as it is, if you want your campaign to go very fast, you can
set it to 10 minutes or set it at 120 minutes if you want the pace to
be slower.
It’s up to you but you can never set it below 5 minutes.
Spread Infiltration Over: this is just the number of days you want
the campaign to run. It is totally up to you to determine how long
or how short you want the campaign.
Loop this infiltration: set to 0 by default, that means the campaign
will not repeat after it completes. However, if you want to keep
running on set and forget then you can set how many times you
want the campaign to loop. You can set it to loop once by
changing the value from 0 to 1 and so on.
Loop after every: by default, it is set to 0, this signifies the numbers
of days to wait after completing a loop and before the next
looping starts.
Finally, click the “Finish” button and you are done.
You’ll now have this…
TRACKING PUBLISHED INFILTRATIONS
To see what has been posted, click on “View Infiltration History”
button.
You should have something like this
You can click the “View” button and you will be taken to the
community where the post was made.
SETTING UP CRON JOB
If your infiltration campaigns do not run or you get a notification
“External cron not found” on the dashboard, then you will need to
disable Traffic Elixir external cron and set up a new cron job in your
server. Follow the steps below:
Go to manage accounts page in Traffic Elixir. Under settings
tab, click on disable external cron button.
Log into cPanel
Under Advanced, click on Cron jobs
Under Add New Cron Job, choose “Every 5 minutes” from
Common Settings
Enter this for Command (changing the URL to match your
site):
wget -O /dev/null http://yoursite.com/wp-
cron.php?doing_wp_cron
Click Add New Cron Job
Go back to Traffic Elixir and restart your campaign.
Good luck and we wish you great results.
Cheers
Precious Ngwu
