The ISO Standards Glossary

8/10/2019 The ISO Standards Glossary

1/19

10/7/2014 The ISO Standards Glossary. ISO 9000 to ISO 9999

http://www.standardsglossary.com/iso9.htm 1/19

INTERNATIONAL STANDARDS: ISO 9000, ISO 27001, ISO 14000, ISO.......

THE ISO STANDARDS GLOSSARYThis glossary of international standardsis designed to providea ready reference forthose seeking the title

of internationalstandards.

MenuHomeISO 1 to ISO 1998ISO 2002 to ISO 2982ISO 3001 to ISO 3994ISO 4010 to ISO 4957ISO 5007 to ISO 5991ISO 6009 to ISO 6989ISO 7004 to ISO 7998ISO 8009 to ISO 8995ISO 9000 to ISO 9999ISO 10000 - 1499715001 - ISO 17799 +

ContactOther Standards

Standard Vendors

Internationalstandards can now beobtained from anumber of onlinesources. For majorstandards, one of themost will known is theBSI outlet:ISO Standards

For less commonstandards, BSIprovide the following:ISO Source Page

ISO 9000 to ISO 9999

ISO 9000:2000Quality management systems. Fundamentals and vocabulary

ISO 9000-1:1994Quality management and quality assurance standards. Guidelines forselection and use

ISO 9000-2:1997Quality management and quality assurance standards. Genericguidelines for the application of ISO 9001, ISO 9002 and ISO 9003

ISO 9000-3:1997Quality management and quality assurance standards. Guidelines forthe application of ISO 9001:1994 to the development, supply,installation and maintenance of computer software

ISO 9001:1994Quality systems. Model for quality assurance in design, development,production, installation and servicing

ISO 9001:2000Quality management systems. Requirements

ISO 9001:2000 (A5 Laminated)Quality management systems. Requirements

ISO 9002:1994Quality systems. Model for quality assurance in production, installationand servicing

ISO 9003:1994Quality systems. Model for quality assurance in final inspection and test

ISO 9004:2000Quality management systems. Guidelines for performanceimprovements

ISO 9013:2002Thermal cutting. Classification of thermal cuts. Geometrical productspecification and quality tolerances

ISO 9019:1995Securities. Numbering of certificates

ISO 9020:1998

Binders for paints and varnishes. Determination of free-formaldehydecontent of amino resins. Sodium sulfite titrimetric method

ISO 9022-1:1994Optics and optical instruments. Environmental test methods.Definitions, extent of testing

ISO 9022-2:2002Optics and optical instruments. Environmental test methods. Cold, heatand humidity

ISO 9022-3:1998Optics and optical instruments. Environmental test methods.Mechanical stress

ISO 9022-4:2002Optics and optical instruments. Environmental test methods. Salt mist

ISO 9022-5:1994Optics and optical instruments. Environmental test methods. Combinedcold, low air pressure

SPONSORSAn ISO 9001

Manual

Includes introductorypresentation, atemplate for an ISO9001 quality manual,an ISO 9000 2000overview, ISO 9000reference sheets, aworkshoppresentation, anddocuments to help

understand processdefinition.

Space For Hire

Contact us if you wishto hire this space foryour standardsservice or product.


2/19



ISO 9022-6:1994Optics and optical instruments. Environmental test methods. Dust

ISO 9022-7:1994Optics and optical instruments. Environmental test methods. Drip, rain

ISO 9022-8:1994Optics and optical instruments. Environmental test methods. Highpressure, low pressure, immersion

ISO 9022-9:1994Optics and optical instruments. Environmental test methods. Solarradiation

ISO 9022-10:1998Optics and optical instruments. Environmental test methods. Combinedsinusoidal vibration and dry heat or cold

ISO 9022-11:1994Optics and optical instruments. Environmental test methods. Mouldgrowth

ISO 9022-12:1994Optics and optical instruments. Environmental test methods.Contamination

ISO 9022-13:1998Optics and optical instruments. Environmental test methods. Combinedshock, bump or free fall and dry heat or cold

ISO 9022-14:1994Optics and optical instruments. Environmental test methods. Dew,hoarfrost, ice

ISO 9022-15:1998Optics and optical instruments. Environmental test methods. Combineddigitally controlled broad-band random vibration and dry heat or cold

ISO 9022-16:1998Optics and optical instruments. Environmental test methods. Combinedbounce or steady-state acceleration and dry heat or cold

ISO 9022-17:1994Optics and optical instruments. Environmental test methods. Combinedcontamination, solar radiation

ISO 9022-18:1994Optics and optical instruments. Environmental test methods. Combineddamp heat and low internal pressure

ISO 9022-19:1994Optics and optical instruments. Environmental test methods.Temperature cycles combined with sinusoidal or random vibration

ISO 9022-20:1997Optics and optical instruments. Environmental test methods. Humid

atmosphere containing sulfur dioxide or hydrogen sulfideISO 9022-21:1998Optics and optical instruments. Environmental test methods. Combinedlow pressure and ambient temperature or dry heat

ISO 9029:1997Methods of test for petroleum and its products. Crude petroleum.Determination of water. Distillation method

ISO 9038:2002Test for sustained combustibility of liquids

ISO 9039:1994Optics and optical instruments. Quality evaluation of optical systems.

Determination of distortion

ISO/IEC 9040:1997Information technology. Open systems interconnection. Virtual terminalbasic class service

ISO/IEC 9041-1:1997


3/19



Information technology. Open systems interconnection. Virtual terminalbasic class protocol. Specification

ISO/IEC 9041-2:1997Information technology. Open systems interconnection. Virtual terminalbasic class protocol. Protocol implementation conformance statement(PICS) proforma

ISO 9044:1999Industrial woven wire cloth. Technical requirements and testing

ISO 9047:2003Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures

ISO 9054:1999Cellular plastics, rigid. Test methods for self-skinned high-densitymaterials

ISO 9056:1990Glass containers. Series of pilferproof finish. Dimensions

ISO 9057:1991Glass containers. 28 mm tamper-evident finish for pressurized liquids.Dimensions

ISO 9058:1992Glass containers. Tolerances

ISO/IEC 9066-3:1996Information processing systems. Text communication. Reliable transfer.Protocol Implementation Conformance Statement (PICS) proforma

ISO 9073-2:1997Textiles. Test methods for nonwovens. Determination of thickness

ISO 9073-4:1997Textiles. Test methods for nonwovens. Determination of tear resistance

ISO 9073-6:2000Textiles. Test methods for nonwovens. Absorption

ISO 9073-7:1998Textiles. Test methods for nonwovens. Determination of bending length

ISO 9073-8:1998Textiles. Test methods for nonwovens. Determination of liquid strike-through time (simulated urine)

ISO 9073-9:1998Textiles. Test methods for nonwovens. Determination of drapecoefficient

ISO 9073-11:2002Textiles. Test methods for nonwovens. Run-off

ISO 9073-12:2002Textiles. Test methods for nonwovens. Demand absorbency

ISO/IEC 9075-9:2001Information technology. Database languages. SQL. Informationtechnology. Database Languages. SQL. Management of external data(SQL/MED)

ISO/IEC 9075-10:2000Information technology. Database languages. SQL. Object LanguageBindings (SQL/OLB)

ISO/IEC 9075-13:2002Information technology. Database languages. SQL. SQL routines andtypes using the Java programming language (SQL/JRT)

ISO 9080:2003Plastics piping and ducting systems. Determination of the long-termhydrostatic strength of thermoplastics materials in pipe form byextrapolation

ISO 9083:2001


4/19



Calculation of load capacity of spur and helical gears. Application tomarine gears

ISO 9084:2000Calculation of load capacity of spur and helical gears. Application tohigh speed gears and gears of similar requirements

ISO 9085:2002Calculation of load capacity of spur and helical gears. Application forindustrial gears

ISO 9093-1:1998Small craft. Seacocks and through-hull fittings. Metallic

ISO 9093-2:2002Small craft. Seacocks and through-hull fittings. Non-metallic

ISO 9094-1:2003Small craft. Fire protection. Craft with a hull length of up to andincluding 15 m

ISO 9094-2:2002Small craft. Fire protection. Craft with a hull length of over 15 m

ISO 9096:2003Stationary source emissions. Manual determination of massconcentration of particulate matter

ISO 9097:1995Small craft. Electric fans

ISO 9102:1997Diesel engines. Screw-in injection nozzle holders types 24, 25, 26 and26.1

ISO TR 9122-2:1990Toxicity testing of fire effluents. Guidelines for biological assays todetermine the acute inhalation toxicity of fire effluents (basic principles,criteria and methodology

ISO TR 9122-3:1993

Toxicity testing of fire effluents. Methods for the analysis of gases andvapours in fire effluents

ISO TR 9122-4:1993Toxicity testing of fire effluents. The fire model (furnaces andcombustion apparatus used in small-scale testing)

ISO TR 9122-5:1993Toxicity testing of fire effluents. Prediction of toxic effects of fireeffluents

ISO TR 9122-6:1994Toxicity testing of fire effluents. Guidance for regulators and specifierson the assessment of toxic hazard in fires in buildings and transport

ISO 9123:2001Measurement of liquid flow in open channels. Stage-fall-dischargerelationships

ISO/IEC 9126-1:2001Information technology. Software product quality. Quality model

ISO 9136-2:2000Abrasive grains. Determination of bulk density. Microgrits

ISO 9144:1991Securities. Optical character recognition line. Position and structure

ISO 9163:1999Textile glass. Rovings. Manufacture of test specimens and

determination of tensile strength of impregnated rovingsISO 9167-1:1995Rapeseed. Determination of glucosinolates content. Method using high-performance liquid chromatography

ISO 9167-2:1997


5/19



Rapeseed. Determination of glucosinolates content. Method using X-rayfluorescence spectrometry

ISO 9173-1:1996Dental extraction forceps. Screw and pin joint types

ISO 9186:2001Graphical symbols. Test methods for judged comprehensibility and forcomprehension

ISO 9187-1:2003Injection equipment for medical use. Ampoules for injectables

ISO 9187-2:1999Injection equipment for medical use. One-point-cut (OPC) ampoules

ISO 9197:1998Paper, board and pulps. Determination of water-soluble chlorides

ISO 9198:2001Paper, board and pulp. Determination of water-soluble sulfates

ISO 9207:1995Manually portable chain-saws with internal combustion engine.Determination of sound power levels. Engineering method (grade 2)

ISO 9211-1:1994Optics and optical instruments. Optical coatings. Definitions

ISO 9211-2:1994Optics and optical instruments. Optical coatings. Optical properties

ISO 9211-3:1994Optics and optical instruments. Optical coatings. Environmentaldurability

ISO 9211-4:1996Optics and optical instruments. Optical coatings. Specific test methods

ISO 9220:1995Metallic coatings. Measurement of coating thickness. Scanning electronmicroscope method

ISO 9222-1:1995Technical drawings. Seals for dynamic application. General simplifiedrepresentation

ISO 9222-2:1995Technical drawings. Seals for dynamic application. Detailed simplifiedrepresentation

ISO 9230:1991Information and documentation. Determination of price indexes forbooks and serials purchased by libraries

ISO 9232:2003Yogurt. Identification of characteristic microorganisms (Lactobacillusdelbrueckii subsp. bulgaricus and Streptococcus thermophilus)

ISO 9236-3:1999Photography. Sensitometry of screen/film systems for medicalradiography. Determination of sensitometric curve shape, speed andaverage gradient for mammography

ISO 9237:1995Textiles. Determination of the permeability of fabrics to air

ISO 9239-1:2002Reaction to fire tests. Horizontal surface spread of flame on floor-covering systems. Determination of the burning behaviour using aradiant heat source

ISO 9241-1:1997Ergonomic requirements for office work with visual display terminals(VDTs). General introduction

ISO 9241-4:1998Ergonomic requirements for office work with visual display terminals


6/19



(VDTs). Keyboard requirements

ISO 9241-5:1999Ergonomic requirements for office work with visual display terminals(VDTs). Workstation layout and postural requirements

ISO 9241-6:2000Ergonomic requirements for office work with visual display terminals(VDTs). Guidance on the work environment

ISO 9241-7:1998Ergonomic requirements for office work with visual display terminals(VDTs). Requirements for display with reflections

ISO 9241-8:1998Ergonomic requirements for office work with visual display terminals(VDTs). Requirements for displayed colours

ISO 9241-9:2000Ergonomic requirements for office work with visual display terminals(VDTs). Requirements for non-keyboard input devices

ISO 9241-10:1996Ergonomic requirements for office work with visual display terminals(VDTs). Dialogue principles

ISO 9241-11:1998Ergonomic requirements for office work with visual display terminals(VDTs). Guidance on usability

ISO 9241-12:1999Ergonomic requirements for office work with visual display terminals(VDTs). Presentation of information

ISO 9241-13:1999Ergonomic requirements for office work with visual display terminals(VDTs). User guidance

ISO 9241-14:2000Ergonomic requirements for office work with visual display terminals(VDTs). Menu dialogues

ISO 9241-15:1998Ergonomic requirements for office work with visual display terminals(VDTs). Command dialogues

ISO 9241-16:1999Ergonomic requirements for office work with visual display terminals(VDTs). Direct manipulation dialogues

ISO 9241-17:1998Ergonomic requirements for office work with visual display terminals(VDTs). Form-filling dialogues

ISO 9251:1996Thermal insulation. Heat transfer. Conditions and properties of

materials. VocabularyISO 9276-1:1998Representation of results of particle size analysis. Graphicalrepresentation

ISO 9276-2:2001Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle sizedistributions

ISO 9276-4:2001Representation of results of particle size analysis. Characterization of aclassification process

ISO/IEC 9281-1:1990Information technology. Picture coding methods. Identification

ISO/IEC 9281-2:1990Information technology. Picture coding methods. Procedure forregistration


7/19



ISO 9282-1:1988Information processing. Coded representation of pictures. Encodingprinciples for picture representation in a 7-bit or 8-bit environment

ISO 9283:1998Manipulating industrial robots. Performance criteria and related testmethods

ISO 9285:1997Abrasive grains and crude. Chemical analysis of fused aluminium oxide

ISO 9286:1997Abrasive grains and crude. Chemical analysis of silicon carbide

ISO 9288:1996Thermal insulation. Heat transfer by radiation. Physical quantities anddefinitions

ISO 9289:1995Oilseed residues. Determination of free residual hexane

ISO/IEC TR 9294:1990Information technology. Guidelines for the management of softwaredocumentation

ISO 9300:1995Measurement of gas flow by means of critical flow Venturi nozzles

ISO 9308-1:2000Water quality. Detection and enumeration of $7IEscherichia Coli$7Rand coliform bacteria in surface and waste water. Membrane filtrationmethod

ISO 9308-3:1999Water quality. Detection and enumeration of $7IEscherichia Coli$7Rand coliform bacteria in surface and waste water. Miniaturized method(most probable number) for the detection and enumeration of $7IE.coli$7R in surface and waste water

ISO 9311-2:2002Adhesives for thermoplastic piping systems. Determination of shear

strengthISO 9312:1995Resistance welding equipment. Insulated pins for use in electrode back-ups

ISO/IEC 9314-5:1995Information processing systems. Fibre Distributed Data Interface(FDDI). Hybrid Ring Control (HRC)

ISO/IEC 9314-6:1998Information processing systems. Fibre Distributed Data Interface(FDDI). Station management (SMT)

ISO/IEC 9314-7:1998

Information processing systems. Fibre Distributed Data Interface(FDDI). Physical layer protocol (PHY-2)

ISO/IEC 9314-8:1998Information processing systems. Fibre Distributed Data Interface(FDDI). Media access control-2 (MAC-2)

ISO 9334:1995Optics and optical instruments. Optical transfer function. Definitionsand mathematical relationships

ISO 9335:1995Optics and optical instruments. Optical transfer function. Principles andprocedures of measurement

ISO 9336-1:1994Optics and optical instruments. Application. Optical transfer function.Interchangeable lenses for 35 mm still cameras

ISO 9336-2:1994Optics and optical instruments. Application. Optical transfer function.Lenses for office copiers


8/19



ISO 9336-3:1994Optics and optical instruments. Application. Optical transfer function.Telescopes

ISO 9337-1:2001Contact lenses. Determination of back vertex power. Method usingfocimeter with manual focusing

ISO 9338:1998Optics and optical instruments. Contact lenses. Determination of thediameters

ISO 9339-1:1998Optics and optical instruments. Contact lenses. Determination of thethickness. Rigid contact lenses

ISO 9339-2:1998Optics and optical instruments. Contact lenses. Determination of thethickness. Hydrogel contact lenses

ISO 9340:1999Optics and optical instruments. Contact lenses. Determination of strainsfor rigid contact lenses

ISO 9341:1998Optics and optical instruments. Contact lenses. Determination of

inclusions and surface imperfections for rigid contact lensesISO 9342:1998Optics and optical instruments. Test lenses for calibration of focimeters

ISO 9345-2:2003Optics and optical instruments. Microscopes. Imaging distances relatedto mechanical reference planes. Infinity-corrected optical systems

ISO 9346:1996Thermal insulation. Mass transfer. Physical quantities and definitions

ISO 9358:1994Optics and optical instruments. Veiling glare of image forming systems.Definitions and methods of measurement

ISO 9360-1:2000Anaesthetic and respiratory equipment. Heat and moisture exchangers(HMEs) for humidifying respired gases in humans. HMEs for use withminimum tidal volumes of 250 ml

ISO 9360-2:2002Anaesthetic and respiratory equipment. Heat and moisture exchangers(HMEs) for humidifying respired gases in humans. HMEs for use withtracheostomized patients having minimum tidal volumes of 250 ml

ISO 9362:1994Banking. Banking telecommunication messages. Bank identifier codes

ISO 9363-1:1999

Optics and optical instruments. Contact lenses. Determination of cytotoxicity of contact lens material. Agar overlay test and growthinhibition test

ISO 9370:1997Plastics. Instrumental determination of radiant exposure in weatheringtests. General guidance and basic test method

ISO 9377-2:2000Water quality. Determination of hydrocarbon oil index. Method usingsolvent extraction and gas chromatography

ISO 9391:1995Water quality. Sampling in deep water for macro-invertebrates.Guidance on the use of colonization, qualitative and quantitative

samplers

ISO 9394:1998Ophthalmic optics. Contact lenses and contact lens care products.Determination of biocompatibility by ocular study with rabbit eyes

ISO 9396:2001


9/19



Plastics. Phenolic resins. Determination of the gel time at a giventemperature using automatic apparatus

ISO 9397:1997Plastics. Phenolic resins. Determination of free-formaldehyde content.Hydroxylamine hydrochloride method

ISO 9398-1:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Flatwork ironing machines

ISO 9398-2:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Batch drying tumblers

ISO 9398-3:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washing tunnels

ISO 9398-4:2003Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washer-extractors

ISO 9400:1996Nickel-based alloys. Determination of resistance to intergranularcorrosion

ISO 9403:2000Crude petroleum. Transfer accountability. Guidelines for cargoinspection

ISO 9408:1999Water quality. Evaluation of ultimate aerobic biodegradability of organiccompounds in aqueous medium by determination of oxygen demand ina closed respirometer

ISO 9409-1:1997Manipulating industrial robots. Mechanical interfaces. Plates (form A)

ISO 9409-2:1997Manipulating industrial robots. Mechanical interfaces. Shafts (form A)

ISO 9431:1999Construction drawings. Spaces for drawing and for text, and title blockson drawing sheets

ISO 9439:2001Water quality. Evaluation of ultimate aerobic biodegradability of organiccompounds in aqueous medium. Carbon dioxide evolution test

ISO 9454-2:2001Soft soldering fluxes. Classification and requirements. Performancerequirements

ISO 9455-2:1996Soft soldering fluxes. Test methods. Determination of non-volatile

matter, ebulliometric methodISO 9455-3:1995Soft soldering fluxes. Test methods. Determination of acid value,potentiometric and visual titration methods

ISO 9455-6:1997Soft soldering fluxes. Test methods. Determination and detection of halide (excluding fluoride) content

ISO 9455-9:1996Soft soldering fluxes. Test methods. Determination of ammonia content

ISO 9455-10:2001Soft soldering fluxes. Test methods. Flux efficacy test, solder spread

method

ISO 9455-12:1994Soft soldering fluxes. Test methods. Steel tube corrosion test

ISO 9455-13:2000Soft soldering fluxes. Test methods. Determination of flux spattering


10/19



ISO 9455-15:2000Soft soldering fluxes. Test methods. Copper corrosion test

ISO 9455-16:2001Soft soldering fluxes. Test methods. Flux efficacy tests, wetting balancemethod

ISO 9455-17:2002Soft soldering fluxes. Test methods. Surface insulation resistance combtest and electrochemical migration test of flux residues

ISO 9456:1997Optics and optical instruments. Opthalmic optics. Marking of spectacleframes

ISO 9462:1993Alpine ski-bindings. Safety requirements and test methods

ISO TR 9464:1998Guide to the use of ISO 5167-1:1991

ISO 9488:2000Solar energy. Vocabulary

ISO/TR 9494:1997Petroleum liquids. Automatic pipeline sampling. Statistical assessmentof performance of automatic samplers determining the water content inhydrocarbon liquids

ISO/IEC 9496:1995CCITT high level language (CHILL)

ISO 9509:1995Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water

ISO 9512:2002Cigarettes. Determination of ventilation. Definitions and measurementprinciples

ISO 9513:2002

Metallic materials. Calibration of extensometers used in uniaxial testingISO 9514:1995Paints and varnishes. Determination of the pot-life of liquid systems.Preparation and conditioning of samples and guidelines for testing

ISO 9518:1998Forestry machinery. Portable chain-saws. Kickback test

ISO/IEC 9529-1:1989Information processing systems. Data interchange on 90 mm (3,5 in)flexible disk cartridges using modified frequency modulation recordingat 15916 ftprad, on 80 tracks on each side. Dimensional, physical andmagnetic characteristics

ISO/IEC 9529-2:1989Information processing systems. Data interchange on 90 mm (3,5 in)flexible disk cartridges using modified frequency modulation recordingat 15916 ftprad, on 80 tracks on each side. Track format

ISO/IEC 9541-1:1991Information technology. Font information interchange. Architecture

ISO/IEC 9541-2:1991Information technology. Font information interchange. Interchangeformat

ISO/IEC 9541-3:1994Information technology. Font information interchange. Glyph shaperepresentation

ISO/IEC 9545:1994Information technology. Open Systems Interconnection. ApplicationLayer structure

ISO TR 9547:1988Programming language processors. Test methods. Guidelines for their


11/19



development and acceptability

ISO/IEC 9548-1:1996Information technology. Open systems interconnection. Connectionlesssession protocol. Protocol specification

ISO/IEC 9548-2:1995Information technology. Open systems interconnection. Connectionlesssession protocol. Protocol Implementation Conformance Statement(PICS) proforma

ISO/IEC 9549:1990Information technology. Galvanic isolation of balanced interchangecircuits

ISO 9556:2001Steel and iron. Determination of total carbon content. Infraredabsorption method after combustion in an induction furnace

ISO 9568:1993Cinematography. Background acoustic noise levels in the theatres,review rooms and dubbing rooms

ISO/IEC TR 9573-11:1992Information processing. SGML support facilities. Techniques for usingSGML. Application at ISO Central Secretariat for International

Standards and Technical ReportsISO/IEC TR 9573-13:1991Information processing. SGML support facilities. Techniques for usingSGML. Public entity sets for mathematics and science

ISO/IEC 9574:1992Information technology. Provision of the OSI connection-mode networkservice by packet mode terminal equipment to an integrated servicesdigital network (ISDN)

ISO/IEC 9576-1:1995Information technology. Open systems interconnection. Connectionlesspresentation protocol. Protocol specification

ISO/IEC 9576-2:1995Information technology. Open systems interconnection. Connectionlesspresentation protocol. Protocol Implementation ConformanceStatement (PICS) proforma

ISO/IEC TR 9577:1996Information technology. Protocol identification in the network layer

ISO/IEC TR 9578:1990Information technology. Communication interface connectors used inlocal area networks

ISO/IEC 9579:2000Information technology. Remote database access for SQL with securityenhancement

ISO 9587:1999Metallic and other inorganic coatings. Pretreatment of iron or steel toreduce the risk of hydrogen embrittlement

ISO 9588:1999Metallic and other inorganic coatings. Post-coating treatments of ironand steel to reduce the risk of hydrogen embrittlement

ISO/IEC 9593-1:1990Information technology. Computer graphics. Programmer's hierarchicalinteractive graphics system (PHIGS) language bindings. FORTRAN

ISO/IEC 9593-3:1990Information technology. Computer graphics. Programmer's hierarchical

interactive graphics system (PHIGS) language bindings. Ada

ISO/IEC 9594-1:1995Information technology. Open systems interconnection. Overview of concepts, models and services

ISO/IEC 9594-2:1995


12/19



Information technology. Open systems interconnection. Models

ISO/IEC 9594-3:1995Information technology. Open systems interconnection. Abstractservice definition

ISO/IEC 9594-4:1995Information technology. Open systems interconnection. The directory.Procedures for distributed operation

ISO/IEC 9594-5:1995Information technology. Open systems interconnection. The directory.Protocol specifications

ISO/IEC 9594-6:1995Information technology. Open systems interconnection. The directory.Selected attribute types

ISO/IEC 9594-7:1995Information technology. Open systems interconnection. The directory.Selected object classes

ISO/IEC 9594-8:1995Information technology. Open systems interconnection. The directory.Authentication framework

ISO/IEC 9594-9:1995Information technology. Open systems interconnection. Replication

ISO/IEC 9595:1991Information technology. Open Systems Interconnection. Commonmanagement information service definition

ISO 9606-3:1999Approval testing of welders. Fusion welding. Copper and copper alloys

ISO 9606-4:1999Approval testing of welders. Fusion welding. Nickel and nickel alloys

ISO 9606-5:2000Approval testing of welders. Fusion welding. Titanium and titanium

alloys, zirconium and zirconium alloysISO 9611:1996Acoustics. Characterization of sources of structure-borne sound withrespect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted

ISO 9614-1:1995Acoustics. Determination of sound power levels of noise sources usingsound intensity. Measurement at discrete points

ISO 9614-2:1997Acoustics. Determination of sound power levels of noise sources usingsound intensity. Measurement by scanning

ISO 9614-3:2002Acoustics. Determination of sound power levels of noise sources usingsound intensity. Precision method for measurement by scanning

ISO 9622:1999Whole milk. Determination of milkfat, protein and lactose content.Guidance on the operation of mid-infrared instruments

ISO 9626:1995Stainless steel needle tubing for the manufacture of medical devices

ISO 9633:2001Cycle chains. Characteristics and test methods

ISO/IEC 9636-1:1991

Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Functional specification.Overview, profiles, and conformance

ISO/IEC 9636-2:1991Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Functional specification. Control


13/19



ISO/IEC 9636-3:1991Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Functional specification. Output

ISO/IEC 9636-4:1991Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Functional specification.Segments

ISO/IEC 9636-5:1991Information technology. Computer graphics. Interfacing techniques for

dialogues with graphical devices (CGI). Functional specification. Inputand echoing

ISO/IEC 9636-6:1991Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Functional specification. Raster

ISO/IEC 9637-1:1994Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Data stream binding. Characterencoding

ISO/IEC 9637-2:1992Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Data stream binding. Binary

encoding

ISO/IEC 9638-3:1994Information technology. Computer graphics. Interfacing techniques fordialogues with graphical devices (CGI). Language bindings. Ada

ISO/IEC 9646-3:1998Information technology. Open systems interconnection. Conformancetesting methodology and framework. The Tree and tabular combinednotation (TTCN)

ISO 9653:2000Adhesives. Test method for shear strength of adhesive bonds (ISO9653:1998)

ISO/IEC 9661:1997Information technology. Data interchange on 12,7 mm wide magnetictape cartridges. 18 tracks, 1 491 data bytes per millimetre

ISO 9664:1995Adhesives. Test methods for fatigue properties of structural adhesivesin tensile shear

ISO 9665:2000Adhesives. Animal glues. Methods of sampling and testing (ISO9665:1998)

ISO 9667:1998Aircraft ground support equipment. Tow bars

ISO 9669:1990Series 1 freight containers. Interface connections for tank containers

ISO 9680:1996Specification for dental operating light

ISO 9687:1996Dental equipment. Graphical symbols

ISO 9692-2:1998Welding and allied processes. Joint preparation. Submerged arc weldingof steels

ISO 9692-3:2001Welding and allied processes. Joint preparation. Metal inert gas welding

and tungsten inert gas welding of aluminium and its alloys

ISO 9692-4:2003Welding and allied processes. Joint preparation. Clad steels

ISO 9693:2000Metal-ceramic dental restorative systems


14/19



ISO 9694:1999Dental phosphate-bonded casting investments

ISO 9702:1999Plastics. Amine epoxide hardeners. Determination of primary,secondary and tertiary amine group nitrogen content

ISO 9703-3:1999Anaesthetic and respiratory care alarm signals. Guidance on applicationof alarms

ISO TR 9705-2:2001Reaction to fire tests. Full scale room tests for surface products.Technical background and guidance

ISO 9706:2000Information and documentation. Paper for documents. Requirementsfor permanence

ISO 9707:1995Information and documentation. Statistics on the production anddistribution of books, newspapers, periodicals and electronicpublications

ISO 9711-1:1990Freight containers. Information related to containers on board vessels.

Bay plan systemISO 9711-2:1990Freight containers. Information related to containers on board vessels.Telex data transmission

ISO 9735-1:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Syntax rules common to allparts

ISO 9735-2:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Syntax rules specific to batchEDI

ISO 9735-3:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Syntax rules specific tointeractive EDI

ISO 9735-4:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Syntax and service reportmessage for batch EDI (message type - CONTRL)

ISO 9735-5:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Security rules for batch EDI(authenticity, integrity and non-repudiation of origin)

ISO 9735-6:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Secure authentication andacknowledgement message (message type AUTACK)

ISO 9735-7:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Security rules for batch EDI(confidentiality)

ISO 9735-8:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Associated data in EDI

ISO 9735-9:2002Electronic data interchange for administration, commerce and transport(EDIFACT). Application level syntax rules. Security key and certificatemanagement message (message type KEYMAN)

ISO 9735-10:2002Electronic data interchange for administration, commerce and transport


15/19



(EDIFACT). Application level syntax rules. Syntax service directories

ISO 9736:2000Eye-ends, in corrosion-resistant steel, threaded, for aircraft control wirerope. Dimensions and loads

ISO 9737:2000Eye-ends, in corrosion resisting steel, swaged on aircraft control wirerope. Dimensions and loads

ISO 9738:2000Turnbarrels, for aircraft control wire rope. Dimensions and loads

ISO 9747:2000Double shank ball-ends, in corrosion-resistant steel, swaged on aircraftcontrol wire rope. Dimensions and loads

ISO 9748:2000Ball-ends, in corrosion-resistant steel, swaged on aircraft control wirerope. Dimensions and loads

ISO 9749:2000Stud-ends, in corrosion-resistant steel, swaged on aircraft control wirerope. Dimensions and loads

ISO 9757:2000Fork-ends, in corrosion-resistant steel, threaded, for aircraft controlwire rope turnbarrels. Dimensions and loads

ISO 9758:2000Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings,for aircraft control wire rope. Dimensions and loads

ISO 9759:2000Fork ends, in corrosion-resistant steel, swaged on aircraft control wirerope. Dimensions and loads

ISO 9760:2000Aerospace. Fork-ends, in corrosion-resistant steel, swaged on aircraftcontrol wire rope, for rolling bearings. Dimensions and loads

ISO 9761:2000Locking clips, in corrosion-resistant steel, for aircraft control wire ropeturnbuckles. Dimensions

ISO 9762:2000Aircraft control wire rope assemblies. Dimensions and end-fittingcombinations

ISO 9771:1997Plastics. Phenolic resins. Determination of the pseudo-adiabatictemperature rise of liquid resols when cured under acid conditions

ISO 9772:2001Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame

ISO 9773:1999Plastics. Determination of burning behaviour of thin flexible verticalspecimens in contact with a small-flame ignition source

ISO 9785:2002Ship and marine technology. Ventilation of cargo spaces where vehicleswith internal combustion engines are driven. Calculation of theoreticaltotal airflow required

ISO 9787:1999Manipulating industrial robots. Coordinate systems and motionnomenclatures

ISO/IEC 9796:1991

Information technology. Security techniques. Digital signature schemegiving message recovery

ISO/IEC 9796-2:2002Information technology. Security techniques. Digital signature schemesgiving message recovery. Integer factorization based mechanisms


16/19



ISO/IEC 9797:1994Information technology. Security techniques. Data integrity mechanismusing a cryptographic check function employing a block cipheralgorithm

ISO/IEC 9797-2:2002Information technology. Security techniques. Message authenticationcodes (MACs). Mechanisms using a dedicated hash-function

ISO/IEC 9798-1:1997Information technology. Security techniques. Entity authentication

mechanisms. GeneralISO/IEC 9798-2:1999Information technology. Security techniques. Entity authenticationmechanisms. Mechanisms using symmetric encipherment algorithms

ISO/IEC 9798-3:1998Information technology. Security techniques. Entity authenticationmechanisms. Mechanisms using digital signature techniques

ISO/IEC 9798-4:1995Information technology. Security techniques. Entity authenticationmechanisms. Mechanisms using a cryptographic check function

ISO/IEC 9798-5:1999

Information technology. Security techniques. Entity authenticationmechanisms. Mechanisms using zero knowledge techniques

ISO 9801:1999Ophthalmic instruments. Trial case lenses

ISO 9802:1996Raw optical glass. Vocabulary

ISO/IEC 9804:1998Information technology. Open systems interconnection. Servicedefinition for the commitment, concurrency and recovery serviceelement

ISO/IEC 9805-1:1998

Information technology. Open systems interconnection. Protocol for thecommitment, concurrency and recovery service element. Protocolspecification

ISO/IEC 9805-2:1996Information technology. Open systems interconnection. Protocol for thecommitment, concurrency and recovery service element. Protocolimplementation conformance statement (PICS) proforma

ISO 9831:1998Animal feeding stuffs, animal products, and faeces or urine.Determination of gross calorific value. Bomb calorimeter method

ISO 9832:2003Animal and vegetable fats and oils. Determination of residual technical

hexane content

ISO 9838:1991Alpine ski-bindings. Test soles for ski-binding tests

ISO 9843:2002Oil of cedarwood, Chinese type ($7ICupressus funebris$7R, Endlicher)

ISO 9849:2000Optics and optical instruments. Geodetic and surveying instruments.Vocabulary

ISO 9856:1996Conveyor belts. Determination of elastic modulus

ISO 9863-2:1996Geotextiles and geotextile-related products. Determination of thicknessat specified pressures. Procedure for determination of thickness of single layers of multilayer products

ISO 9873:2000Dental hand instruments. Reusable mirrors and handles


17/19



ISO 9875:2002Ships and marine technology. Marine echo-sounding equipment

ISO 9876:1995Specification for marine facsimile receivers for meteorological charts

ISO 9876:1999Ships and marine technology. Marine facsimile receivers formeteorological charts

ISO 9886:2001Evaluation of thermal strain by physiological measurements

ISO 9887:1995Water quality. Evaluation of the aerobic biodegradability of organiccompounds in an aqueous medium. Semi-continuous activated sludgemethod (SCAS)

ISO 9888:1999Water quality. Evaluation of ultimate aerobic biodegradability of organiccompounds in aqueous medium. Static test (Zahn-Wellens method)

ISO 9897:1997Freight containers. Container equipment data exchange (CEDEX).General communication codes

ISO 9898:2000Equipment for crop protection. Test methods for air-assisted sprayersfor bush and tree crops

ISO/IEC 9899:1999Programming languages. C

ISO 9902-1:2001Textile machinery. Noise test code. Common requirements

ISO 9902-2:2001Textile machinery. Noise test code. Spinning preparatory and spinningmachinery

ISO 9902-3:2001

Textile machinery. Noise test code. Nonwoven machinesISO 9902-4:2001Textile machinery. Noise test code. Yarn processing, cordage and ropemanufacturing machines

ISO 9902-5:2001Textile machinery. Noise test code. Weaving and knitting preparatorymachinery

ISO 9902-6:2001Textile machinery. Noise test code. Fabric manufacturing machines

ISO 9902-7:2001Textile machinery. Noise test code. Dyeing and finishing machines

ISO 9903-1:2003Textile machinery and accessories. Main dimensions for section wiresfor metallic card clothing. Foot without interlocking or interchaining

ISO 9903-2:2003Textile machinery and accessories. Main dimensions for section wiresfor metallic card clothing. Foot with interchaining

ISO 9905:1998Technical specifications for centrifugal pumps. Class I

ISO 9906:2000Rotodynamic pumps. Hydraulic performance acceptance tests. Grades1 and 2

ISO 9908:1998Technical specifications for centrifugal pumps. Class III

ISO 9913-1:1998Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the FATT method


18/19



ISO 9913-2:2000Optics and optical instruments. Contact lenses. Determination of oxygen permeability and transmissibility by the coulometric method

ISO 9914:1997Optics and optical instruments. Contact lenses. Determination of refractive index of contact lens materials

ISO 9917-2:2000Dental water-based cements. Light-activated cements

ISO 9920:1995Ergonomics of the thermal environment. Estimation of the thermalinsulation and evaporative resistance of a clothing ensemble

ISO 9921-1:1996Ergonomic assessment of speech communication. Speech interferencelevel and communication distances for persons with normal hearingcapacity in direct communication (SIL method)

ISO 9923:1994Micrographics. Transparent A6 microfiche. Image arrangements

ISO 9924-1:2000Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene,

ethylene-propylene copolymer and terpolymer, isobutene-isoprene,isoprene and styrene-butadiene rubbers

ISO 9924-2:2000Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry.Acrylonitrile-butadiene and halobutyl rubbers

ISO 9934-1:2001Non-destructive testing. Magnetic particle testing. General principles

ISO 9934-2:2002Non-destructive testing. Magnetic particle testing. Detection media

ISO 9934-3:2002

Non-destructive testing. Magnetic particle testing. EquipmentISO 9944:1995Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts

ISO/IEC 9945-1:2002Information technology. Portable operating system interface (POSIX).Base Definitions

ISO/IEC 9945-2:2002Information technology. Portable operating system interface (POSIX).System Interfaces

ISO/IEC 9945-3:2002

Information technology. Portable operating system interface (POSIX).Shell and utilities

ISO/IEC 9945-4:2002Information technology. Portable operating system interface (POSIX).Rationale

ISO 9946:1999Manipulating industrial robots. Presentation of characteristics

ISO 9947:1991Textile machinery and accessories. Two-for-one twisters. Vocabulary

ISO 9956-10:1997Specification and approval of welding procedures for metallic materials.

Welding procedure specification for electron beam welding

ISO 9956-11:1997Specification and approval of welding procedures for metallic materials.Welding procedure specification for laser beam welding

ISO 9963-1:1996


19/19


Water quality. Determination of alkalinity. Determination of total andcomposite alkalinity

ISO 9963-2:1996Water quality. Determination of alkalinity. Determination of carbonatealkalinity

ISO 9967:1995Thermoplastics pipes. Determination of creep ratio

ISO 9969:1995Thermoplastics pipes. Determination of ring stiffness

ISO/IEC 9973:1994Information technology. Computer graphics and image processing.Procedures for registration of graphical items

ISO 9974-1:2000Connections for general use and fluid power. Ports and stud ends withISO 261 threads with elastomeric or metal-to-metal sealing. Threadedports

ISO 9974-2:2000Connections for general use and fluid power. Ports and stud ends withISO 261 threads with elastomeric or metal-to-metal sealing. Stud endswith elastomeric sealing (type E)

ISO 9974-3:2000Connections for general use and fluid power. Ports and stud ends withISO 261 threads with elastomeric or metal-to-metal sealing. Stud endswith metal-to-metal sealing (type B)

ISO/IEC 9979:1999Information technology. Security techniques. Procedures for theregistration of cryptographic algorithms

ISO 9981:1998Belt drives. Pulleys and V-ribbed belts for the automotive industry. PKprofile:dimensions

ISO 9982:1998

Belt drives. Pulleys and V-ribbed belts for industrial applications. PH,PJ, PK, PL and PM profiles. Dimensions

ISO/IEC 9983:1989Information processing systems. Designation of unrecorded flexibledisk cartridges

ISO 9988-1:1998Plastics. Polyoxymethylene (POM) moulding and extrusion materials.Designation system and basis for specifications

ISO 9988-2:1999Plastics. Polyoxymethylene (POM) moulding and extrusion materials.Preparation of test specimens and determination of properties

ISO 9994:2002Lighters. Safety specification

ISO 9997:2000Dental cartridge syringes

ISO 9999:2002Technical aids for persons with disabilities. Classification andterminology

The ISO Standards Glossary

Copyright The International Standards Glossary, 2003.

Documents

The ISO Standards Glossary