The LOGIQ 200 PRO Series

LOGIQ 200 PRO Series

The PRO Series represents outstanding value for the most discerning professional, delivering increased productivity and superior diagnostic outcomes

for you and your patients.

Progress

Professional

ProductivityProductivityInvestment Protection

Image Quality

RELAY

SCANNER INTERFACE

CON 1

USC BUS

-SHV

+SHV

SCAN Board

CON 2

TX DRV

P GUN ASSY

WATCH DOG INTERFACE

PRE AMP

\CROSSPOINT

USC BUS

NOVA BUS

+THV

-THV

TBF

PGC

ACC GEN

AAFTGCADC COSMODDS

IIC USC BUSNOVA BUS

TO MVP

PGCRBF

Digital Beamformer

Σ

Digital Time Delay Digital Adder

Flicker-free Monitor!!

WOW!!40MHz Ultra-High frequency

Sampling Rate

MR Technology(Wide Aperture Technology)

011010011010

011010011010

011010011010

011010011010

011010011010

011010011010

Target

Probe

Catch Axial, Lateral, and Temporal

Resolution….

Digital Beamformer

Auto Wave Shaping

Axial ResolutionAxial Resolution

Lateral ResolutionLateral Resolution

Contrast ResolutionContrast Resolution

Temporal ResolutionTemporal Resolution

Best B-Mode IQ!Wide Aperture

Technology

40MHz Converter

3CB(2-5MHz Probe)

Flicker-freeMonitor

High Precision Digital Beamformer

ATO

ATOAcoustic Data

LOGIQ200MD PROImage Processor

ImageAnalysis

Image

Optimization based on Digital Adaptive ProcessingOptimization based on Digital Adaptive Processing

ATO gives you the best

contrast resolution

using One-Touch on keyboard

ATO

ATO

In seconds

Less Operator Dependent… Faster... Better Image QualityLess Operator Dependent… Faster... Better Image Quality

Conventional ManualImage Optimization

2-5 Minutes

ROI

SAP

IMAGE SOFTENER

FRAME AVERAGE

B/M FRONTEND CONTROL

PEAKHOLD

ALM ITPXY

MEMORY

CRDTF ZOOMER

XY ADDRGEN

NON-INTCONVERT

CINECONTROL

CINE MEMORY

FIFOXY

MEMORY

DSP PROGRAMMEMORY

USC BUSI/F

IMAGESTORAGE

RAM

IMAGEDISPLAYCONTROL

VIDEOLUT

VideoDAC

INTERLACE

CONVERT

VIDDAC

VIDEODECODER

SYNCGENERATOR

NOVA BUS

USC BUS

MVP Board

ROM

RAM

RESET CPU

RTC

SUPERI/O

IDECTL

VRAM AGDC

FROM NOVA BUS

MSTE

HV

+/-100V

+/- 65 V

LV Voltages From System

Password : Antony

Logic 200 Alpha Logic 200 Pro

MST MST

DSC MVP

ESP RBF

RTC TBF

CONN SCAN

HV unit BPHV UNIT

MONITOR Non Interlace Monitor

COMPARISION OF LOGIC 200 WITH 200 PRO

Follow these steps to enter the Service Menu.

Note

Probes should be installed in the port and Blue Shift key should be off before take these steps.

1. Pressing Shift + Ctrl keys and then press the Shift +s keys, and then Shift + 1 keys.

2. Input the PASSWORD and press Return key.

The Service Top Menu will appear on the monitor as shown in ILLUSTRATION 2--5.

Service Utility MENU : Top Menu 99/03/12 09:16:37

Current Software Version is 3.0

*System Diagnosis

Board/Program Version

System Reset

Key Operation History

Option Set

Initialize :1 (1:America 2:Europe 3:Asia 4:Japan)

System Clock Adjust

Exit

TEST Conditions

Follow these steps to exit the Service Menu.

1. Press Shift + R keys. If this step will be performed again, the Service Menu will be entered again.

OR

2. Select Exit on the Top Menu, and press Set or Return keys.

The Service Menu will be exited.

Follow these steps to operate the Service Menu.

1. Using Arrow Up/down keys, select one of seven items.

2. Press Set or Return keys.

The Service Sub Menu will be appeared or Service Menu will be operated.

Note

Resetting the system using the System Reset, to reboot System, does not affect on the system

presets.

Follow these steps to enter the System Diagnosis menu.

1. Using the Arrow up/down keys, select the “System Diagnosis”menu in the Top Menu. Refer to the ILLUSTRATION 2--5. The left side of selected menu, here will be appeared the cursor (*).

2. Press Set or Return keys.

The System Diagnosis menu will appear on the monitor as shown in the ILLUSTRATION 2--6.

Service Utility MENU : System Diagnosis 99/03/12 09:16:37

Current Software Version is 3.0

NAME Time Status

*System test 21 M

Scan Test 0 M

TBF Test 0 M

Linear/Convex Path 0 M

Sector Probe Path 0 M

BPHV test 1 M

MVP Hardware Test 1 M

B mode Function 1 M

B mode Cine 8 M

M mode Function 2 M

MSTE test 4 M

Keyboard 0 M

PIOP 1 M

Monitor 0 M

Power Supply 1 M

Exit

Press ’ctrl’+’X’to

Failure Codes

CAE Convex Probe

-Frequency:5Mhz -Bandwidth: 3.7- 7.4 Mhz -FOV:72deg -Convex ROC:72mmR -Biopsy guide: Available

CBF Convex Probe

- Frequency:3.5Mhz - Bandwidth: 2.5 - 5.0 Mhz -FOV:72deg -Convex ROC:50mmR -Biopsy guide: Available

LB Linear Probe

-Frequency:3.5Mhz -Bandwidth: 2.5 - 5.0 Mhz -FOV:94mm

LE Linear Probe

-Frequency:5.0Mhz -Bandwidth: 3.7 -7.4 Mhz -FOV:83mm

LD Linear Probe

-Frequency:3.5Mhz -Banswidth: 2.5 -5.0 Mhz -FOV:94mm

MTZ Micro-Convex Probe

-Frequency:6.5Mhz -Bandwidth: 4.3 -8.6 Mhz -FOV:124deg -Convex ROC:10mmR -Biopsy guide:Available

Wide Range of Probes

CZB Micro-Convex Probe

-Frequency:6.5Mhz -Bandwidth: 4.3 -8.6 Mhz -FOV:124deg -Convex ROC:10mmR

LH Linear Probe

-Frequency:7.7Mhz -FOV:63mm -Biopsy guide:Available

LI Linear Probe

-Frequency:7.5Mhz -Bandwidth: 5.2 -9.5 Mhz -FOV: 35mm

LT Linear Probe

-Frequency:7.5Mhz -Bandwidth: 5.2 -9.5 Mhz -FOV:35mm

Wide Range of Probes

ERB Micro convex/Linear Array probe-Frequency : 7.0Mh-Bandwidth : 5.2-11.3Mhz-FOV : 12 deg

10L Linear probe-Frequency : 9.0Mhz-Bandwidth : 5.2-11.3Mhz-FOV : 40mm

S317 Phased Array Sector probe-Frequency : 3.5Mhz-Bandwidth : 2.5-5.0Mhz-FOV : 90 deg

3Cb Convex Array Probe-Frequency : 3.5Mhz-Bandwidth : 2.5-5.0Mhz-FOV : 59 deg

CS Microconvex Array probe-Frequency : 3.5Mhz-Bandwidth : 2.7-4.2Mhz-FOV : 81 deg

Wide Range of Probes

“We Bring Good Things To Life”

e