The MIL-STAK Large Bale Loaoperator. His goal was to design a fast,his New Holland bale wagon and yet re

The specially designed CushionValve allows operator to gentlyplace bales on second table.

The model 1030-s is designed for3x4 bales with the big operator inmind. It is extremely strong andbuilt to withstand many hours ofcontinuous use. The 1028-s model is designed for the 3x3

bales and is nonadjustable.

PowderCoated!

ader was invented and patented by a Custom Hay Stacking, simple way to single-handedly load and stack large bales withetain the ability to quickly switch back to small bale loading.

The model 1032 isadjustable and able tohandle the 3x3 and3x4 bales.

Air Bag virtually eliminatesside roll of bale wagon.

The spring loaded balebumper takes the shockout of non-stop loadingand is easily adjustablefor varied bale lengths.

MIL-STAK is the leaderin quality and appearance!

MIL-STAK now offers three models to choosefrom (the 1028-s, 1030-s and the 1032)to fit any size of operation, from the family farmto the large commercial operator.

Now approved by New Holland® for the H9800 Series bale wagons.

The double roller 2nd tablebooster helps lift the extraweight of the large bales andby lifting toward the front ofthe 2nd table greatly reducesthe stress on the pivot pins.

Uses New Holland sensorsfor trouble free operation.

The mounting bar isbolted onto both framerails and is designed tohandle the weight andshock of non-stoploading.

BaleWagonModel

10681078

10691079

10751085

10951089

BW28BW38

H9880H9870

3x3Bales

per LoadN/A N/A N/A 15 15 15

3x4Bales

per LoadN/A N/A N/A 10 10 10

BalesHigh inStack

N/A N/A N/A 5 5 5

MIL-STAK large bale clamps now have the necessary sensors andwire harness to automatically load large bales when installed on the2009 H9800 series New Holland bale wagons. The operator simplyselects one of the pre-programmed stack patterns ( for 3x3 or 3x4bales ) on the New Holland controller, puts it in automatic modeand starts loading. The operator manually controls the clampingarm which allows him to get bales close to wheel lines, fences or outof corners. As soon as the bale is clamped it is automatically loadedonto the 2nd table. The clamp returns to the down position and the2nd table raises to slide the baleback. As bales are added to theload, the digital readout on theNew Holland Stack Command™display lets the operator monitorbale loading.

MIL-STAK has taken great care to design a large bale conversion thatdoes not damage your New Holland bale wagon. It is designed to easilyswitch to and from large bale loading with a few bolts and hydraulicquick couplers. Everything is either bolted on or plugged in, there is nowelding on your bale wagon and no wires cut. The 2009 H9800 seriesbale wagons leave the New Holland factory completely MIL-STAK ready,there is no valve blocks to move, no holes to be drilled, and no wiring todo. Now you can install a MIL-STAK large bale loader in your own shopwith your own tools. Plug in the harness from the large bale loader tothe mating plug on your bale wagon and your ready to stack.

YOUR MIL-STAK DEALER IS:

2201 Hwy 30 West