SLIOThe smart control and I/O system

www.vipa.com

SLIO at a glance

SLIO is a modular and extremely compact control and I/O system. It is universally combinable and deployable with every established VIPA system and nearly all those of other producers.

VIPA sets a further milestone in the automation industry with the newly developed system SLIO.

SLIO combines high functionality and a clever mechanical concept in an ex-tremely compact design. SLIO stands for slice input and output. SLIO is very compact and is exactly adapted to the demands of the application slice by slice.

Many interface modules are available for the usage as an IO system. Beside PROFINET and PROFIBUS, EtherCAT, DeviceNet, CANopen, EtherNet/IP and MODBUS TCP are available.

All interfaces modules for PROFINET, PROFIBUS, EtherCAT, DeviceNet, CANopen, EtherNet/IP and MOD-BUS TCP support up to 64 electronic modules.

A module unit consists of terminal and electronic modules that are connected with a safe slide and lock mechanism.

The terminal module combines clamps, intake for the electronic module, and the SLIO backplane bus connector. In the case of service only the electronic module is exchanged by simply pulling it out from the terminal module – the wiring and mounting on the 35mm standard profi le rail remain unchanged.

The deployed power modules are in contrasting colors to the signal and function modules. The electronic modules are supplied with voltage and separated – if required - in potential groups by the power modules.

The cage clamps on the terminal module enable a fast, clear and safe wiring.

With the integrated status LEDs and the user friendly front labeling strips of the electronic modules the identifica-tion and status monitoring of the I/O channels is clear and precise.

The new SLIO backplane bus con-cept with a speed of up to 48 Mbit/s ensures very short reaction times.

With the new SLIO CPU the I/O system has become one of the most advanced centralized control systems in the auto-mation market. With the introduction of the VIPASetCards (VSC) the customer can confi gure a suitable CPU within an seconds. Besides expandable work memory you can also select between different fi eldbus connections.

Industrial Ethernet

Modbus-TCP

SLIO – Features

Significantly simplified ordering process

• You receive everything that is neces-sary for operation with one order number. Regardless whether coupler or only modules.

• All modules can be ordered individually. • The power module is included with the order.

• SLIO does not need a terminal resis-tor (so there is nothing extra that you have to think about when ordering).

Clear status and diagnosis monitoring

• Monitoring of diagnosis and channel status via LEDs.

• Clear allocation and readability of the channel status.

• Detailed diagnosis of each electronic module in the system.

Clever, user friendly labeling

• Labeling strips for individual indication per channel.

• Status LEDs with direct allocation on the labeling strip.

• Terminal assignment and terminal graph on each module.

Easy installation and maintenance • Easy mounting through safe slice mechanism

• Click connection for fast mounting and easy shielding

• Failure protection due to automatic iden-tification of electronic modules

• Unique two stage concept consisting of terminal modules and electronic modules allowing simple and fast maintenance

High-performance backplane bus • Transmission rates of up to 48 Mbit/s • Very fast reaction time of up to 20µs • One terminal module for all signal and function modules

Space saving connection technology • Space saving staircase-shaped wiring with cage clamps

• Easy exchange of modules due to unique wiring concept

• High modularity due to 2 , 4 and 8 channel modules

t

MB

it

t

MB

it

00110011010010110101111

0100101

110010100111001011011001

110010100111001011011001

11001101101100101100010

100110101010011010101001

100110101010011010101001

48 Mbit/s48 Mbit/s001100110100101101011111

110011011011001011000011000

100001

48 Mbit/s48 Mbit/s

SLIO – CPU

Ethernet PG/OP interfaceAlways integrated. For easy pro-gramming and for flexible communi-cation with Touch Panels and Panel PC´s.

PROFINET controllerWith our CPU 015 you get a high performance PROFINET controller that allows you to connect up to 128 devices. Of course you can use this interface at the same time as an active Ethernet interface.

Multi programmableYou are not depending on one sys-tem. Use the engineering tool which you know best: SPEED7 Studio, SIMATIC Manager or TIA Portal. We are flexible and we will remain flexible!

Full serial interfaceASCII, STX/ETX, USS, 3964(R), MPI and MODBUS RTU master/slave are also available on each of our SLIO CPUs as standard.

MPI - For us a mustOf course you can expand this interface as a PROFIBUS slave or master – just as you desire.

WebinterfaceEvery SLIO CPU has a web inter-face, so the diagnostic information and status of your modules are dis-played. Of course, a remote access to this site is also possible. Only a simple connection to your network is required and you can access this web interface.

Exchangeable power moduleThe power module is supplied with the CPU. In the case of a fault only the electronic module can be exchanged and you can continue. As you can see we considered your requirements here.

SD cards and SD cards lockingHigher performance and safety by the usage of SD cards including a unique SD card lock!

High speed backplane bus With our high speed backplane bus with up to 48 Mbit/s the fastest reaction times of up to 20 µs can be reached. Use all modules from the SLIO I/O system. Up to 64 modules can be connected in one line.

Expandable work memory Well known with the unique SPEED7 technology, here we also made sure that you have a possibility of expand-ing your application. Your CPU can simply grow with your application.

up to 64 modules

CPU 015PN

PWR

SF

RUN

STOP

FRCE

MCC

DE

PB-BF

L/A

SPD

PLCPN

BF

MT

L/A1

SPD1

L/A2

SPD2

RUN

STOP

MR

VIPA 015-4PN00256kByte......512kByte

X4 ETH1 X1 PG/OP X2 MP1 X3 PB-DP

CPU features which can be activated

CPU

Fieldbus

Work memory

014

master

015

slave

CPU 014 CPU 015PN

Work memory from 64 kB 256 kB

up to 192 kB 512 kB

PROFINET -

Ethernet-PG/OP

PB-Master optionally optionally

PB-Slave optionally optionally

MPI

MPI, ASCII, STX/ETX, 3964(R), USS Master, Modbus-Master/-Slave

RJ45 Ports 1 2

Article No.additional

work memory PB master PB slave

955-C000M00 0 kB -

955-C000S00 0 kB -

955-C000020 + 64 kB - -

955-C000M20 + 64 kB -

955-C000S20 + 64 kB -

955-C000030 + 128 kB - -

955-C000M30 + 128 kB -

955-C000S30 + 128 kB -

955-C000040 + 256 kB - -

955-C000M40 + 256 kB -

955-C000S40 + 256 kB -

CPU 014 CPU 015PN

Work memory from 64 kB 256 kB

up to 192 kB 512 kB

PROFINET -

Ethernet-PG/OP

PB-Master optionally optionally

PB-Slave optionally optionally

MPI

MPI, ASCII, STX/ETX, 3964(R), USS Master, Modbus-Master/-Slave

RJ45 Ports 1 2

Article No.additional

work memory PB master PB slave

955-C000M00 0 kB -

955-C000S00 0 kB -

955-C000020 + 64 kB - -

955-C000M20 + 64 kB -

955-C000S20 + 64 kB -

955-C000030 + 128 kB - -

955-C000M30 + 128 kB -

955-C000S30 + 128 kB -

955-C000040 + 256 kB - -

955-C000M40 + 256 kB -

955-C000S40 + 256 kB -

Technical dataFeatures which can be activated via SD card

Clear reduction of your warehouse costsFlexible reaction within seconds using VSC confi gurationSPEED7 technology: - large amounts of data are processed in real time - offers a flexible memory expansion, compatible with the application - ensures maximum speed with all applications

up to 64 modules

Interface modules (IM)

The space saving interface module is the interface between process level and superior bus system. All control signals are transmit-ted to the electronic module via the internal backplane bus.

SSI modules (FM)

The SSI module is specially designed to process the data of an encoder with SSI interface. This allows you extremely precise work.

Power modules (PM)

The power modules are used for feeding in the load voltage. The two stage concept enables a simpli-fied maintenance by the separation of the power electronics and the terminal module.

Counter modules (FM)

These special function modules are designed spe-cifically for counting. And in this task they can hardly be beaten.

Signal modules (SM)

Signal modules are for the connection of the sensor/actor level and for capture of digital and analog signals in and out of the process.

Potential distribution modules (CM)

Distributors for power sup-ply are easily realizable by the deployment of clamp modules and this makes possible the connection of active supplied sen-sors for example proximity switches.

Communication processor (CP)

Communication processor are for the connection of different target or source systems, for example via Ethernet to superior ERP systems or via serial to sub-ordinate scanners, printers and other peripheral equip-ment.

ETS modules (Edge Timestamp System)

Microsecond accurate measurement and detection of moving objects (speed and acquisition period).

This means for you:No time accuracy errors anymore, which are caused by the fieldbus and CPU cycle.

SLIO – The I/O system

**

* Q4/2012* Q4/2012

For each application the right module

Digital Input 2x 4x 8x

DC 24 V • • •

DC 24 V (Diagnosis) - - •

DC 24 V (2 µs…4 ms) • • -

DC 24 V (3 wire) - • -

DC 24 V (NPN) • • •

DC 24 V (ETS) • • -

DC 24 V (Safety) - • -

Digital Output 2x 4x 8x

DC 24 V, 0.5 A • • •

DC 24 V, 0.5 A (Diagnosis) - - •

DC 24 V, 2A • • -

DC 24 V, 0.5 A (NPN) • • •

DC 24 V, 0.5 A (ETS) • • -

DC 24 V, 0.5 A (PWM) • - -

DC 30 V/AC 230 V/3 A (Relay) • • -

DC 24 V, 0.5 A (Safety) - • -

Analog Input 1x 2x 4x

0(4)...20 mA ISO (2 wire potential seperated)

| 12 Bit - • -

0...10 V | 12 Bit - • •

0(4)...20 mA | 12 Bit - • •

0(4)...20 mA (2 wire) | 12 Bit - • -

+/-10 V | 12 Bit - • •

Thermocouple | 16 Bit - • -

R RTD (2x 3-/4-Wire) | 16 Bit - - •

DMS (1x 4-/6-Wire) | 16 Bit • - -

0…10 V | 16 Bit - • •

0(4)…20mA | 16 Bit - • •

+/- 10V | 16 Bit - • -

Analog Output 2x 4x

0...10 V | 12 Bit • •

0(4)...20 mA | 12 Bit • •

+/-10 V | 12 Bit • •

0…10 V | 16 Bit • •

+/-10 V | 16 Bit • •

CPs

RS232 •

RS422/485 •

Counter/SSI modules

Frequency measurement DC 24 V (600kHz)

| 24 Bit •

(AB) DC 24 V (DO 1x, DC 24 V, 0.5 A)

| 32 Bit •

(AB) DC 5 V | 32 Bit •

(AB) DC 24 V | 32 Bit •

SSI, RS422, 8…32 Bit, 1xDI, 1xCO,1xCI

| 32 Bit •

Fieldbus modules Slave

PROFIBUS •

PROFINET •

EtherCAT •

EtherNet/IP •

DeviceNet •

MODBUS-TCP •

CANopen •

Power modules

DC 24 V, 10 A •

DC 24 V, 4 A (2. DC 24 V + 5 V / 2 A) •

SLIO – open for everything

SPEED7 Studio

Hardware configuration

• Simplified hardware configuration

• Clever Drag & Drop function

• Intelligent input help by means of tooltips

• Photo-realistic represen-tation of the modules used

Networking

• Networking via PROFIBUS, PROFINET, EtherCAT and Standard-Ethernet

• The topology display is unchanged independent of the bus protocol

• The topology display is unchanged independent of the bus protocol

Programming

• The hand tools of the SPEED7 Studios are STL, FBD, and LAD

• The diagnosis is possible by means of module status and monitoring chart – even with history and trend graph

• Different color designs, hierarchical levels & clear allocation

Visualization

• Web and vector based visualization

• Easy and locally independent access via panel, laptop, smart phone and tablet PC

• Complete integration of your project variables for use in visualization

© V

IPA

| 10

/201

3 | E

K00

7512

| S

IMA

TIC

, S

TEP,

SIN

EC

, S

7-30

0 an

d S

7-40

0 ar

e re

gist

ered

tra

dem

arks

of

Sie

men

s A

G

Notes

www.vipa.com