the third generation is here.

less force<more smile

Thousands of Orthodontists worldwide have embraced the innovative technology of the SmartClip™

Self-Ligating Appliance System. And now, 3M Unitek, a global leader in Orthodontic products, introduces

the third generation: The SmartClip™ SL3 Self-Ligating Appliance System.

THE REvOLuTION CONTINuES…

THE INTELLIGENT CLIPTHAT STILL DOES THE TRICK, EvEN BETTERBased on clinical feedback, 3M Unitek has combined advanced materials engineering

with sophisticated mechanical design to develop an even more effective self-ligating

bracket system and has improved the unique self-ligating clip mechanism. The

SmartClip SL3 Self-Ligating Appliance System now uses less force to give your

patients more to smile about.

TRuE SELF-LIGATING BRACKETSWith no moving latches or doors, SmartClip SL3 brackets are true

self-ligating brackets. The familiar twin design allows for selective

engagement, giving the Orthodontist added control during treatment.

Also, the traditional tie-wings provide easy application of auxiliaries

for space closure when desired. The open slot concept was designed

with patient hygiene in mind because it facilitates easy cleaning; this

helps reduce problems caused by plaque build-up often associated

with other ligation mechanisms.

MuLTIPLE PRESCRIPTIONS AvAILABLEThe SmartClip™ SL3 Self-Ligating Appliance System is offered in the

MBT™ System prescription, as well as Ricketts* (High Torque) and Roth*

(Low Torque) prescriptions, giving Orthodontists the option to select

the treatment philosophy that works most efficiently in their

practice. Alternatively, individualized treatment based on the

diagnosis of each patient can be prescribed via components from

the three prescriptions utilizing the Variable Prescription Orthodontics

(VPO) concept.

ENHANCED SMARTCLIPTM SL3MOLAR BRACKETSRe-designed to better serve Orthodontists’ needs, SmartClip SL3

Molar Brackets have small low profile tie-wings for increased

treatment flexibility. The enhanced design accommodates either

steel ligatures for lacebacks and tiebacks or AlastiK™ Ligature

Modules. The maxillary 1st molar brackets incorporate the distal

offset into the bracket base rather than into the slot, improving

archwire retention during treatment.

SySTEM COMPATIBILITyFor the benefits of self-ligation and an aesthetic appearance, the SmartClip

SL3 Appliance System is fully compatible with our Clarity™ SL Self-Ligating

Appliance System and can be used together in treatment to meet patient

requirements.

* 3M Unitek version of this prescription. No endorsement by the doctor is implied.

SmartClip™ SL3 Molar Brackets

Compared to earlier SmartClip™ Appliance versions, the advanced SL3 clip significantly reduces wire insertion forces

and removal forces required for large wires. The clips have more room to flex, making them more forgiving to wire

misalignment, thereby helping to minimize patient discomfort. Mechanical testing confirms that the new clip incorporated

in the SmartClip SL3 bracket generates less force than its predecessor during insertion and removal of large, rectangular

stainless steel archwires. The data shows a decrease in the force required to engage and disengage a .019 X .025 stainless

steel archwire for the new clips.

THE THIRD GENERATION vS. THE PREvIOuS SMARTCLIPTM APPLIANCE

THE 3M PRACTICE MARKETING RESOuRCE CENTER:EvERyTHING yOu NEED, ALL IN ONE PLACELooking to improve your practice marketing? Then look no further because 3M Unitek has created patient referral

brochures, ads, postcards, gift certificates and so much more for you to customize and make your practice marketing

more effective. Visit www.3MUnitek.com and click on Practice Marketing Resource Center Overview to view.

H

Orange St.

Wilson Ave.

For more information visit www.3MBraces.com

The 3M Braces AdvantageInnovative Self-Ligating Technology

• Enables faster treatment time

• Allows for fewer & faster appointments

• No more elastic bands

• Easy to keep clean

SHARE THE 3MTM BRACES ADvANTAGE WITH PROSPECTIvE PATIENTS!

Source: 3M Unitek Labs. Source: 3M Unitek Labs.

less force<more smile

SL3 ClipPreviousClip

The difference between the new SmartClip™ SL3 Self-Ligating bracket’s clip compared to prior generations is that

less force is required to engage and disengage the archwire, making treatment more comfortable for patients.

the third generation difference

• Twin shape bracket with rhomboidal design• Color-coded quadrant ID system• Enhanced molar brackets available

FAMILIAR BRACKET

DESIGN

• Smooth radius surface for enhanced patient comfort• Notched tie-wings for additional bicuspid identification• Low profile self-ligating bracket• Torque-in-base for level slot line up and improved finishing

INTELLIGENT SL3 CLIP

• Enhanced for easy wire engagement and disengagement• Pre-programmed “release” of the archwire • Open, clean design for improved patient hygiene

ALIGNMENT

• Vertical scribe line for more accurate bracket placement

• Optional APC™ Adhesive Coated Appliance System• Micro-etched 3-point contact base surface for anatomical contouring

BONDING

Angled ramp for lighter disengagement forces

Precision laser cut

“Pivot” base for lighter engagement forces

SmartClip™ SL3 Molar BracketsSmartClip™ SL3 Molar Brackets have been re-designed to better serve orthodontists’ needs. With the addition of small, low profile tie-wings for increased treatment flexibility, the enhanced design can accommodate either steel ligatures for laceback and tiebacks or AlastiK™ Ligature modules. Also, the maxillary 1st molar brackets incorporate the distal offset into the bracket base rather than into the slot, improving archwire retention during treatment.

The APC™ Adhesive Coated Appliance SystemWith the APC™ Adhesive Coated Appliance System, orthodontic bonding has never been simpler or more efficient. The APC System reduces bonding variables and steps by precoating the brackets with adhesive, and delivering the brackets in individually-identified, hygienically-sealed packages. SmartClip SL3 Self-Ligating Appliances may be ordered with APC™ II Adhesive or APC™ PLUS Color-Changing Adhesive with fluoride, or without adhesive coating.

SmartClip™ SL3 Self-Ligating Appliance SystemThe enhanced SmartClip™ SL3 Self-Ligating Appliance System from 3M Unitek includes a third-generation self-ligating clip, redesigned molar brackets and two additional prescriptions. Compared to earlier generations of SmartClip Appliances, the advanced SL3 clip uses less force so Orthodontists can provide their patients even more comfort and efficient treatment.

SmartClip™ Appliance Wire Insertion and Disengagement InstrumentsThe SmartClip SL3 Appliance System incorporates specially designed insertion and disengagement instruments to aid with the wire handling and thereby improve patient comfort. There are two insertion instruments, one for .018 and one for .022 slot users. The single point end is designed for use with light wires while the torquing key end is designed to assist with proper alignment of rectangular wires during insertion.

SmartClip™ Appliance System Hybrid and Dimpled ArchwiresSmartClip™ System Hybrid Archwires provide a precise rounding of the corners of rectangular archwires to blend the power of a rectangular wire with the reduced binding of a round wire. The hybrid archwire design improves archwire sliding mechanics by reducing binding and notching without compromising archwire integrity. This can result in easier wire insertion/disengagement.SmartClip™ System Dimpled Archwires simply prevent the archwires from walking. Dimpled archwires restrict archwire drift, thereby reducing the possibility of patient discomfort. Usable in all treatment scenarios, dimpled archwires reduce or eliminate the need to cinch the archwire behind the buccal tubes.

Multiple Prescriptions AvailableThe SmartClip SL3 Self-Ligating Appliance System is offered in MBT™ System prescription, as well as Ricketts* (High Torque) and Roth* (Low Torque) prescriptions, giving Orthodontists the option to select the treatment philosophy that works most efficiently in their practice.

Clinical Education OpportunitiesTo learn about product techniques and applications, including no-cost CE classes, visit www.3MUnitekTraining.com. For hands-on training or additional clinical education, visit www.3MUnitek.com and register for an event. 3M Unitek can also provide your study club or society group with speakers who can provide presentations demonstrating the evidence-based clinical performance of the SmartClip SL3 Appliance System. For more information, contact your local representative or our 3M Unitek CE Hotline at 1-800-852-1990 ext. 4649.

33M UnitekOrthodontic Products2724 South Peck RoadMonrovia, CA 91016 USAwww.3MUnitek.com

In U.S. and Puerto Rico: 1-800-423-4588 • 626-574-4000In Canada: 1-800-443-1661Technical Helpline: 1-800-265-1943 • 626-574-4577CE Hotline: 1-800-852-1990 x4649 • 626-574-4649Outside these areas, contact your local representative.

APC, AlastiK, Clarity, MBT and SmartClip are trademarks of 3M.Please recycle. Printed in USA.© 2009-2010, 3M. All rights reserved. 016-935-5 1008