THE ULTIMATE SOURCE FOR DETAILING AND RESTORATION …Camaro Catalog 866-358-2277 SS396.COM Fuel Tank Super Kits If your original tank & hardware has seen better days, you can replace

Camaro Catalog866-358-2277 SS396.COM106 Fuel & Exhaust

THE ULTIMATE SOURCE FOR DETAILING AND RESTORATION PARTS SINCE 1990

Camaro Catalog 866-358-2277 SS396.COM

Fuel Tank Super KitsIf your original tank & hardware has seen better days, you can replace everything in one shot with this complete kit! We give you the choice of a beautiful OEM tank (made in North America) for the ultimate in show quality or an IMPROVED QUALITY import tank. Both tanks are galvanized. Each kit includes (1) tank, (1) tank to filler neck (1967-68 only), (1) upper neck (1967-68), (1) neck sleeve, (1) anti-squeak kit, (1) bolt kit, (1) lock ring and (1) o-ring gasket.

OEMXT-67KUS 1967-68 All ..............229.02 kitXT-69KUS 1969 All ....................165.06 kit

Stainless Steel Fuel TanksThese stainless steel fuel tanks are shiny enough for any show car and rust proof enough for any daily driver! Installation is easy because this tank is a direct bolt in replacement for your OEM tank.XTS-67F 1967-68 All .................................239.99 ea.XTS-69F 1969 All ......................................239.99 ea.XTS-70F 1970-73 w/o EEC ........................239.99 ea.XTS-71F 1970-73 w/ EEC ..........................239.99 ea.XTS-74F 1974-77 ......................................239.99 ea.XTS-78F 1978-81 ......................................239.99 ea.Ships Oversize 2

OEM Fuel TanksWhen you want the highest quality original style fuel tank, look no further than Ground Up’s line of OEM fuel tanks! Made in North America, these fuel tanks are galvanized as original and are perfect for your show car.XT-67F 1967-68 All (18 gal.) ...................139.99 ea.XT-69F 1969 All (18 gal.) ........................139.99 ea.XT-70F 1970 w/o EEC (18 gal.) ...............199.99 ea.XT-71F 1970-73 w/ EEC (18 gal.) ............199.99 ea.XT-74F 1974-77 All (21 gal.) ...................199.99 ea.XT-78F 1978-81 All (21 gal.) ...................199.99 ea.1969 includes filler neck. Ships Oversize 2.

Reproduction Fuel TanksThese new and improved reproduction fuel tanks are galvanized to retain that original shine. These new fuel tanks are of a much better quality than previous reproductions that were out on the market, making them perfect for daily drivers and weekend show cars alike.XT-67X 1967-68 All (18 gal.) ...................119.99 ea.XT-69X 1969 All (18 gal.) ........................119.99 ea.XT-70X 1970-73 w/o EEC ........................129.99 ea.XT-70XE 1970-73 w/ EEC ..........................129.99 ea.XT-74X 1974-77 All .................................139.99 ea.XT-78X 1978-81 All .................................139.99 ea.1969 includes filler neck. Ships Oversize 2.

Stainless Fuel Tank Super Kits These stainless tank kits will probably outlast your car and still look very close to OEM. Each kit includes (1) tank, (1) tank to filler neck (1967-68 only), (1) upper neck (1967-68), (1) neck sleeve, (1) anti-squeak kit, (1) bolt kit, (1) lock ring and (1) o-ring gasket.XT-67K-SS 1967-68 All ................................. 335.06 kitXT-69K-SS 1969 All ...................................... 266.34 kitNo Volume Discount. Ships Oversize 2.

XT-69K-SS

XT-67KUS

XT-67F

XT-67X

XTS-69X

Fuel Tank Mounting KitIf your tank is good but you need to replace your hardware, this complete kit has it all! Includes straps, insulation and all hardware.TANK-3 1967-69 All ....................................36.46 kit

Fuel Tank StrapsOE style reproduction fuel tank straps.XTS-679 1967-69 ........................................ 19.95 pr.XTS-703 1970-73 ........................................ 19.99 pr.XTS-768 1974-81 ........................................ 24.99 pr.4022-749-82P 1982-92 ....................................... 23.95 pr.

Stainless Steel Fuel Tank StrapsPerfect for your new stainless steel tank!XTS-F67S 1967-69 ........................................ 39.99 pr.XTS-F70S 1970-73 ........................................ 39.99 pr.XTS-F768S 1974-81 ........................................ 44.95 pr.

Fuel Tank InsulationCorrect foam insulation which is glued to the top of the fuel tank to prevent squeaks and rattles, and tar paper which goes between the tank and the straps.NH-4381 1967-81 ................................................13.99 kitNH-UNI 1967-01 Universal 36" x 21” ...............19.99 ea.

Fuel Tank HardwareCorrect OEM bolts and clips for mounting fuel tank as original.BCI-4753 1967-69 All ......................................8.95 kit

NH-4381

BCI-4753

XTS-F67S

XTS-679

TANK-3

1967-81 Sniper Fuel Injection Fuel Tanks Converting the carbureted fuel system on your car or truck over to EFI can be a daunting task. We have made this conversion easy with our complete tank and fuel system kits! When converting to EFI, it is crucial that you do not contaminate your new parts with dirt, rust, and sludge from an old fuel tank. Sniper fuel tanks are designed to meet or exceed the quality of your factory fuel tank. Sniper tanks are made from steel with a galvanized finish that are manufactured to the OEM specifications. Narrow corner tanks offer more room for large tire combos. Tank With Pump & Sender Stock WidthHOL-19-100 1967-68* 550HP ..................... 549.99 ea.HOL-19-400 1967-68* 750HP ..................... 599.99 ea.HOL-19-104 1969** 550HP ......................... 549.99 ea.HOL-19-404 1969** 750HP ......................... 599.99 ea.Tank With Pump & Sender Narrow CornersHOL-19-101 1967-68* 550HP ...............................................................................599.99 ea.HOL-19-401 1967-68* 750HP ...............................................................................649.99 ea.HOL-19-103 1969** 550HP ...................................................................................599.99 ea.HOL-19-403 1969** 750HP ...................................................................................649.99 ea.Install Kit (hose, filter & fittings)HOL-526-10 Universal For EFI .................................................................................237.99 ea.Hose clamps are not included with kits with 2 piece filler necks. *Steel filler neck that extends to rear valance is not included. You must use your existing stock filler neck or purchase a new one.**You may have to switch to the shallow reach gas cap 1.25 inch depending on your application. No volume discount. Ships oversize. Not eligible for free shipping.

ImportXT-67KI 1967-68 All ..............223.90 kitXT-69KI 1969 All ....................151.95 kitNo Volume Discount. Ships Oversize 2.

HOL-19-100

107Fuel & ExhaustCamaro Catalog866-358-2277 SS396.COM



1967-68 Steel Filler NeckOE style reproduction fuel filler neck assembly.XN-113 1967-68 All ...................................39.99 ea.

Sending Unit HarnessNew OE style reproduction with correct boot.18915 1967-68 All ...................................16.99 ea.18910 1969 All ........................................16.99 ea.33825 1970-71 All ...................................16.99 ea.33835 1972-73 All ...................................17.99 ea.36272 1974-77 All ...................................17.99 ea.36269 1978-80 All ...................................23.99 ea.

1967-68 Filler Neck SleeveCorrect rubber sleeve that covers the fuel filler neck assembly.XNS-517 1967-68 All ...................................22.99 ea.

1967-68 Filler Neck HoseCorrect fuel filler neck hose.XNH-40 1967-68 All ..................................... 9.99 ea.

Fuel Tank Hose KitsCorrect GM style hose and pinch clamps.AXP-3800 All 3/8” .............................................4.95 kitAXP-1438 All 3/8” - 1/4” ...................................6.95 kit

Sender FilterCorrect mesh filter to keep debris out.XFF-092 All 3/8” ..........................................17.95 ea.

Fuel Tank Vent Correct fuel tank vent.XTV-689 1968-70 ........................................39.95 ea.

Fuel Tank Sending UnitsOriginal GM or OE style reproduction sending units.XSU-016 1967-69 3/8” GM ........................194.99 ea.XSU-19 1967-69 3/8” Repro ......................34.99 ea.XSU-93 1967-69 3/8” w/ 1/4” Return Repro .........................34.99 ea.XSU-848 1970-73 3/8” Repro ......................59.99 ea.XSU-846 1970-73 3/8” w/ 1/4” Return Repro .........................46.95 ea.XSU-741 1974-81 3/8” ................................45.99 ea.XSU-742 1974-81 3/8” w/ 1/4” Return ........45.99 ea.DSE080201 0-90 Ohm Sending Unit for DSE Tank ...........................51.99 ea.No Volume Discount on GM.

Sending Unit Lock Rings Correct locking rings used to secure the sending unit to the tank. XLR-937 1967-69 w/ Gasket .......................... 5.95 ea.XLR-999 1970-73 w/ Gasket .......................... 5.95 ea.XLR-7481 1974-81 w/ Gasket .......................... 5.95 ea.

1967-68 Filler Neck Hose ClampCorrect OEM clamp for filler neck hose.XNC-300 1967-68 All ..................................... 3.99 ea.

Fuel Tank DoorsCorrect spring loaded fuel tank door.XTD-1630 1969 Door ..........................................22.95 ea.XTD-344 1970-77 Door .....................................22.95 ea.XTD-10B Door Bumper ........................................ 1.95 ea.BTB-56 Door Bolt/Nut ....................................... 1.25 ea.BPA-53K 1967-81 Plate To Bracket Hardware ......3.95 kit

XLR-937

XFF-092

XSU-016

ELC-516 ELC-038T ELC-1438T

BLC-056 XLB-679

Fuel Line ClipsCorrect clips for attaching fuel lines to frame.ELC-1516 5/16” Line ............................................ 3.99 ea.ELC-516 5/16” w/ Tab ......................................... 3.99 ea.ELC-038 3/8” Line .............................................. 4.99 ea.ELC-038T 3/8” w/ Tab ........................................... 3.95 ea.ELC-1438 1/4” - 3/8” Line .................................... 4.99 ea.ELC-1438T 1/4” - 3/8” w/ Tab ................................. 3.99 ea.BLC-056 Correct Bolt .......................................... 0.50 ea.XLB-679 1967-69 Retainer at Rear Frame........ 15.95 ea.

Fuel Line Clip KitsThese convenient kits include all of the correct clips needed to install a set of factory fuel lines.INL-CCF201 1967-68 7pc .....................................22.95 kitINL-CCF202 1969 w/o Return 7pc ........................20.95 kitINL-CCF203 1969 w/ Return 7pc ..........................26.95 kitINL-CCF205 1970-71 3/8” w/o Return 10pc .........26.95 kitINL-CCF206 1970-71 3/8” w/ Return 10pc ...........36.95 kitINL-CCF207 1972-77 3/8” w/o Return 10pc .........28.95 kitINL-CCF208 1972-77 3/8” w/ Return 10pc ...........36.95 kitINL-CCF209 1978-81 3/8” w/ Return 10pc ...........36.95 kit

XN-113

XNS-517

XNH-40

XNC-300

XTD-1630

XTD-10B BTB-56

1891518910

AXP-3800

XTV-689

INL-CCF201

XTC-149XTC-807

XTC-043 XTC-059 XTC-057

Fuel Tank CapsOE style reproduction fuel tank caps with correct logos.XTC-043 1967-68 Paintable ........................22.95 ea.XTC-045 1967-68 SS ...................................40.99 ea.XTC-059 1967 SS 350 .................................40.99 ea.XTC-057 1967-68 RS ...................................42.99 ea.XTC-250 1967-68 Bowtie ............................37.99 ea.XTC-149 1969-70 Short Cam ......................11.95 ea.XTC-807 1971-74 Long Cam .......................16.99 ea.XTC-817 1975-81 Non Vented ...................... 9.95 ea.XTC-819 1975-81 Vented ............................12.95 ea.




Fuel Lines Front to RearOE style reproduction pre-bent fuel lines featuring correct armor shielding and cloth insulation as original. Available in original material (OM) and stainless steel (SS).

Main Lines OM SSEGL6703 1967 V8 Small Block 3/8” (1pc.) .................. 66.99 ea.............................. 103.99 ea.EGL6704 1967 V8 Big Block 3/8” 1pc.......................... 66.99 ea.............................. 103.99 ea.EGL6701 1967-68 5/16” 1pc ....................................... 66.99 ea.............................. 103.99 ea.EGL6803 1968 V8 Small Block 3/8” 1pc ...................... 66.99 ea.............................. 103.99 ea.EGL6805 1968 V8 Big Block 3/8” 1pc.......................... 66.99 ea.............................. 103.99 ea.EGL6905 1969 6 Cylinder 5/16” 1pc ........................... 66.99 ea.............................. 103.99 ea.EGL6907 1969 V8 All 3/8” 1pc .................................... 66.99 ea.............................. 103.99 ea.EGL7001 1970-73 3/8” 2pc ......................................... 66.99 ea.............................. 103.99 ea.EGL7006 1970-74 6 Cylinder 3/8” 2pc ........................ 66.99 ea.............................. 103.99 ea.EGL7201 1972 396 3/8” 2pc ....................................... 66.99 ea.............................. 103.99 ea.EGL7202 1972 396 1/4” Vapor Line 2pc ..................... 66.99 ea.............................. 103.99 ea.EGL7401 1974 3/8” 2pc .............................................. 66.99 ea.............................. 103.99 ea.EGL7506 1975-76 3/8” 2pc ......................................... 66.99 ea.............................. 103.99 ea.EGL7705 1977 Front 5/16” X-Over 1pc ....................... 41.99 ea................................ 51.99 ea.EGL7704 1977 5/16” Vapor Line 1pc .......................... 66.99 ea.............................. 103.99 ea.EGL7801 1977-79 3/8” 2pc ......................................... 66.99 ea.............................. 103.99 ea.EGL8001 1980-81 (except Z/28) 3/8” 2pc ................... 66.99 ea.............................. 103.99 ea.EGL8005 1980-81 Z/28 only 3/8” 2pc ......................... 66.99 ea.............................. 103.99 ea.Ships Oversize 2.

Fuel Return Lines OM SSEGL6909 1969 V8 All 1/4” 1pc ....................................66.99 ea. ...............................103.99 ea.EGL7002 1970-73 All 1/4” 2pc ...................................66.99 ea. ...............................103.99 ea.EGL7402 1974 1/4” 2pc ..............................................66.99 ea. ...............................103.99 ea.EGL7504 1975-76 1/4” 2pc ........................................66.99 ea. ...............................103.99 ea.EGL7802 1977-79 1/4” 2pc ........................................66.99 ea. ...............................103.99 ea.EGL8002 1980-81 (except Z/28) 1/4” 2pc ...................66.99 ea. ...............................103.99 ea.EGL8006 1980-81 Z/28 1/4” 2pc ................................66.99 ea. ...............................103.99 ea.Ships Oversize 2.

Vapor Return Lines OM SSFEM04 1970-73 V8 4pc...........................................99.99 ea. ...............................143.99 ea.FEM03 1970-74 6 cyl 1pc .....................................101.99 ea. ...............................144.99 ea.FEM74 1974 V8 4pc ..............................................101.99 ea. ...............................144.99 ea.FEM05 1975-77 1pc..............................................101.99 ea. ...............................144.99 ea.FEM08 1978 2pc ...................................................101.99 ea. ...............................143.99 ea.FEM10 1979-81 2pc..............................................101.99 ea. ...............................144.99 ea.

Exhaust ManifoldsNew GM restoration manifolds. These brand new manifolds are sold in matched pairs and come with GM cast numbers. AXD-67 features alternator bracket provision as original for some cars.AXD-67* 1967-68 SB non-SMOG 3840912 / 3892679 ................... 339.95 pr.AXD-69** 1969-72 SB non-SMOG 3932376 / 3942529 ................... 359.95 pr. AXD-69S 1969-72 SB w/ SMOG 3946826 / 3942527 ................... 379.95 pr.AXD-396 BB non-SMOG 3916178 / 3909879 ................... 379.95 pr. AXD-396S BB w/ SMOG 3916178 / 3909879 ................... 379.95 pr. *Features alternator mount provision. **Use for early cars without alternator mount provision. No volume discount. Ships Oversize.

Exhaust Stud KitSteel studs for attaching pipe to manifolds.ALI-2228 All V8 ..............................................24.99 kit

OEM Exhaust Manifold BoltsCorrect head marked and colored bolts for mounting exhaust manifolds to block.APB-1382 SB w/ Washers 24pc .......................27.99 kitAPB-1821 BB Flanged Head 16pc ..................23.99 kitAPB-3506 BB Loose Washer 32pc ...................26.99 kit

Exhaust French LocksThis kit is a correct set of four stainless steel stamped french locks for corners of exhaust manifold as installed by factory.EXL-100 1967-73 SB ....................................14.95 kitEXL-200 1967-73 BB ....................................14.95 kit

Upper & Lower Heat StoveWorks in conjunction with the air heat tube to preheat the air cleaner thermo-sensor. EHS-471 1969-76 Upper Heat Stove ............. 9.99 ea.EHS-473 1969-81 Lower Heat Stove............19.99 ea.EHS-128 1968-81 Heat Riser Tube ..............13.95 ea.

EXL-200

ALI-2228

EHS-471

EHS-473

AXD-69

EHS-128

Heat Riser ValvesCorrect valve for pre-heating engine on cold start.AHR-1190 Valve SB 2” ....................................49.95 ea.AHR-1180 Valve BB 2.5”.................................69.99 ea.

Heat Riser SpacersTakes the place of the heat riser for increased flow.N-660 2“ Spacer SB ..................................54.95 ea.N-733 2.5” Spacer BB ..............................46.99 ea.

AHR-1190

N-660

APB-1382

XD-500 XE-153XG-225Exhaust Gaskets & DonutsXG-20 Riser Gasket 2” SB ........................... 1.95 ea.XG-225 Riser Gasket 2.5” BB ....................... 1.95 ea.XD-400 Donut 2” SB..................................... 3.95 ea.XD-500 Donut 2.5” BB ................................. 4.95 ea.XE-152 Extension 2” SB .............................12.99 ea.XE-153 Extension 2.5” BB .........................15.99 ea.




Pypes Performance Exhaust SystemsFabricated using the highest quality materials, the smooth, 16 gauge, mandrel-bent stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The mufflers are precision matched to deliver the ultimate in sound and performance. Pypes systems come complete with a pair of precision matched Pypes mufflers, correct tailpipes, clamps and hangers. These systems can be installed at home without any special tools. 409 SSSGF60R 1967-69 w/ X-Pipe 2.5” w/ Race Pros ........ 549.99 kitSGF60S 1967-69 w/ X-Pipe 2.5” w/ Street Pros ...... 549.99 kitSGF63R 1967-69 w/ X-Pipe 3” w/ Race Pros ........... 599.99 kitSGF63S 1967-69 w/ X-Pipe 3” w/ Street Pros ......... 599.99 kitSGF11R 1970-81 w/ X-Pipe 2.5” w/ Race Pros ........ 499.99 kitSGF11S 1970-81 w/ X-Pipe 2.5” w/ Street Pros ...... 499.99 kitSGF13R 1970-81 w/ X-Pipe 3” w/ Race Pros ........... 575.99 kitSGF13S 1970-81 w/ X-Pipe 3” w/ Street Pros ......... 575.99 kitSGF31R 1970-81 w/o X-Pipe 2.5” w/ Race Pros ...... 499.99 kitSGF31S 1970-81 w/o X-Pipe 2.5” w/ Street Pros .... 499.99 kitShips Oversize 2.

Electronic Exhaust Cut Out KitThis kit comes with 2-electric exhaust cutouts, wiring harness to control both cutouts w/ one switch, stainless steel mounting hardware and extra thick gaskets. This is the most weather resistant and water tight cut out kit on the market!HVE10 3” All .................................................... 375.99 ea.Connects to any standard 3 inch collector including the following Pypes products: XVX10F and XVX13F.

Pypes Crossflow Exhaust SystemThis crossflow system was designed for incredible clearance but with an ultra high flow crossflow muffler. Includes the ONLY horsepower generating X-pipe kit designed to specifically run in the drive shaft tunnel for extra ground clearance.SGF70 1970-81 2.5” 409 Stainless .....................599.99 kitSGF70S 1970-81 2.5” 304 Polished Stainless ......799.99 kitShips Oversize 2.

Pypes Universal X-PipesIf you are really looking to give your muscle car an easy 15-30 horsepower boost, toss your old balance tube and go with one of these new X-Crossovers from Pypes. This new siamese design is dyno proven to increase horsepower and torque. 409 PolishedXVX10 1967-81 2.5” .........299.99 ea. .................N/AXVX13 1967-81 3”.............299.99 ea. .................N/AXVA14 1967-81 3.5” .........319.99 ea. .................N/ADriveshaft Tunnel X-PipesXVF10 1967-81 2.5” ..........199.99 kit ......279.99 kitXVF13 1967-81 3”..............239.99 kit .................N/AShips Oversize 2.

Pypes Driveshaft Tunnel X-Pipe Legs w/ DumpsThis is a pair of Pypes dump pipes for the XVF10 X-pipe kit. These pipes replace the front legs of the XVF10 and dump straight back.XVX10F 1967-81 2.5” 409 ..........................129.99 kitXVX13F 1967-81 3” 409 .............................137.99 kit

XVA10

XVX10F

SGF70

HVE10

SGF11R

Pypes Big Block HeadersPypes big block headers feature large 2" primary tubes and 3.5" collectors with power spikes. Constructed of 304 mandrel bent stainless steel and fully TIG welded they include stainless collector reducers, premium hardware and gaskets.HDR100S 1968-69 BB .................................643.99 ea.No volume discount.

HDR100S

EVT59 EVT49

Collector ReducersThese act as connectors from your header collectors to intermediate pipes for a clean look.PVR10S 3” Header to 3” Pipe ..................................... 84.99 pr.PVR13S 3.5” Header to 3” Pipe .................................. 84.99 pr.PVR16S 3” Header to 2.5” Pipe .................................. 84.99 pr.PVR19S 3.5” Header to 2.5” Pipe ............................... 84.99 pr.

Pypes Exhaust TipsAdd the finishing touch to your exhaust system with a set of triple chrome plated tips from Pypes! All tips are slip fit.EVT49 2.5” Angle Cut .............................................. 38.99 pr.EVT50 3” Angle Cut ................................................. 48.99 pr.EVT59 2.5” Hockey Stick Style ............................... 100.99 pr.EVT61 3” Hockey Stick Style .................................. 100.99 pr.

DownpipesIf you are using stock manifolds, you will need a pair of these downpipes to connect to the system. 409 Stainless steel.DGU14S 1967-81 SB ........................................ 152.99 pr.DGU20S 1967-81 BB ........................................ 140.99 pr.

DGU14S

PVR19S

Chambered Exhaust SystemsOE style reproduction of this radical factory installed high performance exhaust system. This is a high quality aluminized system and features all of the correct features with correct tailpipe exits. Aluminized SSXCE-80K 1967-68 SB ........559.95 kit ............. 899.95 kitXCE-90K 1967-68 BB ........529.95 kit ............. 899.95 kitXCE-100K 1969 SB .............529.95 kit ............. 899.95 kitXCE-200K 1969 BB .............559.95 kit ............. 899.95 kitShips Oversize 2.

XCE-200K

Exhaust Hanger KitsComplete with all necessary hardware to install your new OEM style dual exhaust system.XHP-678K 1967-68 Dual ................................ 112.95 kitXHP-69K 1969 Dual ...................................... 112.95 kitXCI-69K 1967-69 Chambered ..................... 119.95 kit

XHP-678K

OEM Style Exhaust SystemsThese complete aluminized exhaust systems are a perfect replacement for standard dual exhaust. All components are aluminized inside and out for long lasting beauty. Pipes are slightly polished giving a stainless steel-like appearance. Systems are available for big block and small block engines with or without resonators.XSF-67 1967-68 SB 2” ..................................425.95 kitXSF-67BB 1967-68 BB 2.5”...............................425.95 kitXSF-69 1969 SB 2” .......................................425.95 kitXSF-69Z 1969 Z/28 2.25” ...............................379.95 kitXSF-69BB 1969 BB 2.5” ....................................399.95 kitShips Oversize 2.

XSF-67

DownturnsThese universal downturns are perfect for off road applications when tail pipes are not desired.PVD10 2.5” 409 Stainless ............................ 59.99 pr.PVD13 3” Aluminized .................................. 72.99 pr.

PVD13




Flowmaster American Thunder Dual Exhaust SystemsWith easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. • Mandrel bent 16 gauge aluminized tubing• Includes hangers and hardware for easy installation• Made in the USABelow includes Super 40 Series Mufflers; Aggressive & Powerful Exterior Exhaust Tone

FLOW-17201 1967-69, 3”, Aluminized, Dual Rear Exit ..............................799.99 kitBelow includes Super 44 Series Mufflers; Moderate to Aggressive Exterior Exhaust Tone

FLOW-17129 1967-68, 2.5”, Aluminized, Dual Side Exit ..............................481.99 kitFLOW-817129 1967-68, 2.5”, Stainless, Dual Side Exit ..............................611.99 kitFLOW-17139 1969, 2.5”, Aluminized, Dual Rear Exit ..............................549.99 kitFLOW-817139 1969, 2.5”, Stainless, Dual Rear Exit ..............................689.99 kit FLOW-1050 1967-69 3” Aluminized Dual Rear Exit ....... ....................................................330.99 kitCrossmember back with weld in H pipe.

FLOW-17129

FLOW-17104

Below includes 80 Series Crossflow (Transverse) Muffler; Moderate Exterior Exhaust Tone

FLOW-17104 1967-74, 2.5”, Aluminized, Transverse ...............580.99 kitFLOW-817104 1967-74, 2.5”, Stainless, Transverse....................707.99 kitBelow includes 50 Series Delta Flow Mufflers; Moderate to Aggressive Exterior Exhaust Tone

FLOW-17149 1970-74, 2.5”, Aluminized, Dual Rear Exit ..............................599.99 kitBelow includes 50 Series Slim Line Mufflers; Moderate to Aggressive Exterior Exhaust Tone

FLOW-817571* 1975-81, 2.5”, Stainless, Dual Rear Exit ..............................778.97 kit*Off Road racing use only - not legal for use on catalyst equipped vehicles. Requires double hump crossmember. Requires fabrication and/or welding to adapt system to manifolds or headers. Note: These systems do not fit convertibles without a body X-brace modification.

Flowmaster American Thunder Cat Back SystemsAmerican Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster sys-tems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.• Dyno tuned for maximum performance• Includes hangers and hardware for easy installation• Moderate to aggressive sound exterior exhaust tone• Mandrel bent 16 gauge tubingFor the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster Cat-back exhaust system provides. D.O.R. (Dual out rear) systems are the perfect choice.FLOW-17233 1986-91 5.0/5.7L 3” w/ 3” Flanged Cat* ........................ 499.99 kitFLOW-17234 1986-91 5.0/5.7L 3” w/ 2.5” Flanged Cat** ................... 457.99 kitFLOW-17143 1993-95 5.7L LT1 2.5” w/ 3” Flanged Cat** ...................... 399.99 kitFLOW-17133 1995-97 5.7L LT1 2.5” w/ Dual Cat** ................................ 399.99 kitFLOW-17199 1998-02 5.7L LS1 3” w/ Dual Cat** ................................ 499.99 kitFLOW-17358 1998-02 3.6L V6 2.5” w/ Slip Fit Cat* .............................. 999.99 kitFLOW-817481 2010-13 6.2L SS 3” *** ................ 999.99 kitFLOW-817609 2010-13 6.2L SS ZL1 3” **** ...... 1066.99 kit*Moderate sound.**Aggressive sound. *** Will not fit with ground effects package. Does not fit models with dual mode exhaust option. Does not fit convertible models.**** Fits 2013-2015 Chevrolet Camaro SS and ZL1 with a 6.2L V8 engine and Dual Mode Exhaust Option. Also fits 2015 3.6L V6 with D/M Option. Fits Hardtop Coupe Models Only.No volume discount.

FLOW-17233

Flowmaster American Thunder Axle Back SystemsThis aggressive sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maxi-mum performance and includes specially selected mufflers to support the performance image of the car.• Dyno tuned for maximum performance• Includes hangers and hardware for easy installation• Moderate to aggressive sound exterior exhaust tone• Mandrel bent 16 gauge tubingFor the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster axle-back exhaust system provides. D.O.R. (Dual out rear) systems are the perfect choiceFLOW-817483 2010-15 3.6L V6 Hardtop 2.5" ... 669.99 kitFLOW-817495 2012-13 6.2L SS Hardtop 3”* ..... 645.99 kitFLOW-817743 2016-18 3.6L V6 2.5”** ............. 599.99 kitFLOW-817744 2016-18 6.2L SS 3”** ................. 583.99 kitFLOW-817746 2016-18 6.2L SS 3”*** ............. 1158.99 kitFLOW-817746 2016-19 6.2L ZL1 3”*** ........... 1158.99 kit* Will not fit with ground effects package. Does not fit models with dual mode exhaust option. Does not fit convertible models.**Does NOT Fit Vehicles Fitted With Performance Exhaust Option (Quad Tip).***Fits WITH Performance Exhaust Option (NPP-Quad Tip). Does not fit with factory ground effects.No volume discount.

FLOW-817744

Flowmaster Force 2 Axle Back SystemsThese quieter sounding systems are designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. With easy fit in mind, these systems are mandrel bent for maximum performance, include specially selected mufflers and all necessary parts and hardware for easy installation. This Force II systems deliver a mild exterior and interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage.• Dyno tuned for maximum performance• Includes hangers and hardware for easy installation• Stock to mild exterior exhaust tone• Mandrel bent 16 gauge tubingFor the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster axle-back exhaust system provides. D.O.R. (Dual out rear) systems are the perfect choiceFLOW-817506 2010-13 6.2L SS 3”* ......................659.99 kit* Will not fit with ground effects package.No volume discount.

FLOW-817506

Flowmaster Outlaw Axle Back SystemsOur race-oriented Outlaw systems are designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. Outlaw systems deliver an ultra aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage.• Dyno tuned for maximum performance• Includes hangers and hardware for easy installation• Aggressive loud exterior exhaust tone• Mandrel bent 16 gauge tubingFor the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster axle-back exhaust system provides. D.O.R. (Dual out rear) systems are the perfect choiceFLOW-817504 2010-13 6.2L SS 3”* ......................599.99 kitFLOW-817686 2014-15 6.2L SS 3”** ....................625.99 kitFLOW-817745 2016-18 6.2L SS 3”*** ..................599.99 kit*Fits hard top and convertible models, does not fit vehicles equipped with factory ground effects package. Does not fit models with dual mode exhaust option**Fits hard top and convertible models. Does not fit models with dual mode exhaust option*** Does NOT Fit Vehicles Fitted With Performance Exhaust Option (Quad Tip). No volume discount.

FLOW-817504




Flowmaster Scavenger Series X-PipeFlowmaster's new Scavenger X-pipe kit for the 2016-2019 Camaro SS and 2017-2019 Camaro ZL1 is a great way to improve the performance of your engine while giving your car a unique race inspired tone letting others know your serious when it comes to performance. Features dual 3.00 inch mandrel-bent 409s stainless steel tubing and utilizes Flowmaster's patented D-port design to help maximize exhaust scavenging. These Scavenger Series X-pipe assemblies are intended to be used as an upgrade to Flowmaster's rear section Axle-back kits, and replace the heavily flattened section of the factory system. Does not fit convertibles.• Flowmaster reliability • Race proven technology• Dyno tuned for maximum performance• Stainless steel constructionFLOW-81083 2016-19 6.2L SS 3” Manual ...........327.99 kitFLOW-81083 2017-19 6.2L ZL1 3” Manual .........327.99 kitFLOW-81084 2016-18 6.2L SS 3” Automatic .......764.99 kitNo volume discount.

Flowmaster Direct Fit Catalytic ConvertersFlowmaster Federal direct fit catalytic converters are stainless steel and meet USEPA standards and include a 25,000 mile emissions, and 50,000 mile/5 year exterior casing warranty.• Flowmaster quality• Meets or exceeds all USEPA 49-state requirementFLOW-2010001 1982-94 V6/V8 2.5” ...................... 116.99 ea.FLOW-2010008 1998-02 5.7L V8 2.25” LH. ........... 199.99 ea.FLOW-2010009 2000-02 5.7L V8 2.25” RH ............ 237.99 ea.Not for use in California. No volume discount.

FLOW-81083

FLOW-2010001

Flowmaster Pre-bent Tail PipesThese 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.• Premium Flowmaster quality• Mandrel bent 16 gauge tubing • Rear exit

Aluminized SteelFLOW-15801 1967-81 2.5” .................................155.99 pr.FLOW-15822 1967-69 3”.....................................150.99 pr.409 Stainless SteelFLOW-815801 1967-81 2.5” .................................200.99 pr.No volume discount.

FLOW-15801

Hooker Dual Exhaust Cut-Out KitsThe choice is yours – Tease the Street or Please the Track with Hooker’s new “Street-Tease” exhaust cut-outs! Good and “old” ideas improved with new materials, that’s what we have here! These cut-outs will provide years of worry free use with a mix-ture of stainless steel and aluminum. The materials will keep the elements out, and the sound. Well that’s up to you, with a flip of the toggle or a push of the remote button.• Tig-welded T-304 stainless steel tubing for a clean and weather resistant finish• 6061 aircraft aluminum motor and valve bracket• Instant performance gains when opened• Stainless tip can be positioned for any direction of exhaust• Simple 12v cigarette lighter plug in for main power supply• Welding Required HKR-11051HKR Dual 2.5” ..................................425.99 kitHKR-11052HKR Dual 3” .....................................425.99 kitNo volume discount.

HKR-11051HKR

Flowtech Axle Back Exhaust SystemsFlowtech Exhaust Products are the perfect combination of quality and value.• Quality welds for strength, longevity, and good looks• Tube Geometry designed for maximum ground clearance and hassle free installation• Lightweight 18-gauge, Stainless Steel material maximizing strength and durability• Factory mounting points for ease of installation

FT-51600FLT 2010-15* SS 6.2L V8 2.5” 304 Stainless .........................397.99 kitFT-51601FLT 2010-15** SS 6.2L V8 2.5” 304 Stainless ........................819.99 kitFT-51604FLT 2010-15 SS 6.2L V8 3” 409 Stainless ............................353.99 kitFT-51606FLT 2016-19*** SS 6.2L V8 2.75” 304 Stainless ......................393.99 kitFT-51605FLT 2016-18*** 2L/3.6L 2.25” Stainless ..............................393.99 kitFT-51605RFLT 2016-18*** 2L/3.6L 2.25” w/o Mufflers Stainless .........319.99 kit*Fits coupe only. **Full cat back system. ***Without dual mode exhaust.

FT-51606FLT

Flowtech Afterburner HeadersFlowtech’s Afterburner Turbo Chamber Headers represent the first new major design change in exhaust technology in decades. This design combines the race-proven 4 into 1 design with the torque managing capabilities of a Tri-Y header. The turbo chamber helps smooth out exhaust turbulence for increased performance and a broad power curve.• Horsepower and Torque increased over conventional header design• Big 3” secondary collector for reduced back pressure• Tuned-length primary tubes combine with Velocity Tube to smooth out exhaust pulses• All hardware and premium gaskets included for a complete installation• Patented Velocity Tube increases cylinder scavengingFT-49100FLT 1967-81 Black Paint 1 5/8” 3” Collector ............................261.99 pr.FT-49100-1FLT 1967-81 Silver Ceramic 1 5/8” 3” Collector ............................453.99 pr.No volume discount.

FT-49100FLT

Flowtech Mid-Length HeadersFlowtech headers are the perfect combination of performance and value. Flowtech Mid-Length headers are precision engineered using mandrel bent tubing, formed collectors and 5/16” flanges with sealing rings for a leak-free seal.• Tuned-length primary tubes for street performance• Mandrel-bent tubing for smooth exhaust flow• Light weight & sturdy 16 gauge tubing• Mandrel-formed Power Plenum collector for low back pressure• Sturdy, leak-tested O-Ring port seals• Engineered for an easy, trouble-free precision fit• Includes all mounting hardware and premium gasketsSmall BlockFT-11108FLT 1967-81 Black Paint 1-1/2” Tubes 2.5” Collector ...................................165.99 pr.FT-11102FLT 1982-92* Black Paint-1 1/2” Tubes 2.5” Collector ...................................170.99 pr.FT-11102YFLT 1982-92 Y-pipe For FT-11102FLT 2.5” To 3 ......................................... 168.99 ea.Kits below include Y-pipeFT-16102FLT 1986-92* Black Paint 1-1/2” Tubes 2.5” Collector ...................................378.99 pr. FT-16102-1FLT 1986-92* Silver Ceramic 1-1/2” Tubes 2.5” Collector ...................................592.99 pr.*Features O2 oxygen sensor bung. No volume discount.

FT-16102-1FLT




Flowtech Long Tube HeadersFlowtech headers are the perfect combination of performance and value. Flowtech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16” flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance. Instant performance gains when opened• Tuned-length primary tubes for street performance• Mandrel-bent tubing for smooth exhaust flow• Light weight & sturdy 16 gauge tubing• Mandrel-formed Power Plenum collector for low back pressure• Sturdy, leak-tested O-Ring port seals• Engineered for an easy, trouble-free precision fit• Includes all mounting hardware and premium gaskets

Small BlockFT-11100FLT 1967-81 Black Paint 1-5/8” Tubes 3” Collector ......................................167.99 pr.FT-31100FLT 1967-81 Silver Ceramic 1-5/8” Tubes 3” Collector ......................................355.99 pr.Big BlockFT-11130FLT 1967-81 Black Paint 1-3/4” Tubes 3” Collector ......................................191.99 pr.FT-11132FLT 1967-81 Black Paint 1-7/8” Tubes 3.5” Collector ...................................223.99 pr.No volume discount.

Flowtech Block Hugger HeadersFlowtech Block Hugger headers are ideal for street rods where fit and finish is really important. Block Huggers make perfor-mance and style easy for engine swaps and with our new Hug-ger Toobs you Can hook up to an existing system with ease.• Computer-controlled mandrel-bent tubing for smooth exhaust flow• Sturdy 16 gauge tubing• Easy installation - can be used with stock motor mounts• Precision die-cut exhaust port flanges• Engineered and tested for a leak-proof seal• All necessary hardware included for a complete installationSmall BlockFT-11000FLT 1967-92 Black Paint 1-5/8” Tubes 2.5” Collector .................................187.99 pr.FT-31000FLT 1967-92 Silver Ceramic 1-5/8” Tubes 2.5” Collector .................................365.99 pr.Big BlockFT-31030FLT 1967-92 Silver Ceramic 1-3/4” Tubes 2.5” Collector .................................492.99 pr.Big Block Tight FitFT-11701FLT 1967-92 Black Paint 1-3/4” Tubes 2.5” Collector .................................228.99 pr.FT-11701-1FLT 1967-92 Silver Ceramic 1-3/4” Tubes 2.5” Collector .................................340.99 pr.FT-11701-7FLT 1967-92 Stainless 1-3/4” Tubes 2.5” Collector .................................340.99 pr.FT-11701-2FLT 1967-92 Chrome 1-3/4” Tubes 2.5” Collector .................................340.99 pr.No volume discount.

FT-11100FLT

Flowtech Shorty HeadersFlowtech headers are the perfect combination of performance and value. Flowtech headers are precision engineered using mandrel bent tubing, formed collectors and 5/16” flanges with sealing rings for a leak-free seal.• Short tube header design for maximum ground clearance• Mandrel-Formed Power Plenum for maximum flow• Constructed of .049 cold roll flash mild steel tubing• Sturdy, leak-tested O-Ring port seals• Engineered for an easy, trouble-free precision fit• Includes all mounting hardware and premium gasketsSmall BlockFT-11114FLT 1982-89 Black Paint 1-1/2” Tubes 2.5” Collector ........................................ 168.99 pr.FT-11116FLT 1982-92 Black Paint 1-1/2” Tubes 2.5” Collector ........................................ 168.99 pr.FT-31138FLT 2010-14 Silver Ceramic 1-3/4” Tubes 2.5” Collector ........................................ 569.99 pr.No volume discount.

FT-11701FLT

FLOW-814112

Flowmaster Scavenger Series Elite Headers• Stainless steel construction • Ball & socket collector connections• Dyno tuned for maximum performance• High temperature ceramic coated • 0.375 thick laser cut flangesFLOW-814110 1967-81, 265-400 SB, 1-5/8” Primary ........................717.99 kit3” collector outlet diameter; reducers included. Fits D port cylinder heads.

FLOW-814111 1967-81, 396-502 BB, 1-3/4” Primary ........................717.99 kit3” collector outlet diameter; reducers included. Will not fit Saginaw close ratio with 825 power steering box. Big block frame stands and motor mounts must be used to ensure proper engine location and header fit.

FLOW-814112 1967-69, 396-502 BB, 2” Primary ..............................717.99 kit3.5” collector outlet diameter; reducers included. Big block frame stands and motor mounts must be used to ensure proper engine location and header fit.

FLOW-814115 1967-69, LS1, LS6, 1-3/4” Primary ........................649.99 kit3.5” collector outlet diameter; reducers included

Flowmaster Scavenger Series Elite Shorty HeadersFlowmaster's Scavenger Series Elite shorty headers are designed to replace the restrictive factory manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They feature 1-3/4 in. primary tubes, 3/8 in. thick laser cut flanges and factory collector connections, ensuring a direct-fit, leak free installation. Like all Flowmaster products, the benefits include improved throttle response, power and engine efficiency.• 3/8” laser cut flanges• Dyno tuned for maximum performance• High temperature ceramic coating• 409 stainless steel constructionFLOW-814121 2010-14 SS 6.2L 1-3/4” Primary .......................717.99 pr.No volume discount.

FLOW-814121

Hooker Cast Iron Exhaust ManifoldsHooker cast iron exhaust manifolds have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their shorty de-sign means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. “Hook” up your GM LS engine with Hooker cast iron manifolds today!• Intended for all GM LS (except LS7 and LS9) engine swap applications where durability, quiet operation, emissions compliance and leak-free sealing is desired• Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance• 2.25-inch outlet diameter• Free-flowing for good performance and catalytic converter efficiency• Recommended for strong performance on engines making up to 500 horsepower HKR-8501-1HKR Silver Ceramic Coated .............431.99 kitHKR-8501-3HKR Black Ceramic Coated ..............431.99 kitHKR-8501-4HKR Titanium Ceramic Coated ........431.99 kitHKR-8501HKR Natural Cast Finish ..................323.99 kitHKR-8510HKR Natural Cast Finish Turbo* .......477.99 kit*For use with a turbo charger. No volume discount.

HKR-8501-1HKR

Documents

THE ULTIMATE SOURCE FOR DETAILING AND RESTORATION …Camaro Catalog 866-358-2277 SS396.COM Fuel Tank Super Kits If your original tank & hardware has seen better days, you can replace