Embed Size (px)
Citation preview
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
The Wheel Doctor®Quality Wheel Nuts and Accessories
Wheel LocksLug NutsValves
Accessories
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
TIPS FOR CORRECT WHEEL NUT IDENTIFICATION
Supplying your customer with the correct wheel nuts involves more than ensuringyou have the correct thread pitch to suit their application.
Most factory steel wheels and many factory or aftermarket alloy wheels use a onepiece taper-seat nut, similar to our 86-14**(non locking) and 86-40*** (locking)styles.
Older alloy wheels use a nut profile where the shaft goes through a correspondinghole in the wheel and a loose washer supports the nut against the face of thewheel. These are similar to our 86-17** (non locking) and 86-42*** (locking)styles.
Care should also be taken to ensure the nut has sufficient length to fully engageagainst the face of the wheel, before it “bottoms out” on the stud. This is a safetyissue and should be checked with care.
Customers should be aware not to over-tighten nuts, particularly lock nuts, and onlytighten to torque specification on the product packaging. Over-tightening candamage vehicle studs and make nut removal difficult, and possibly damage nuts.Damage caused by over-tightening is not covered by product warranty.
Special application nuts are available, including long stud lock nuts (our 86-48***open-ended lock nuts), small outside diameter nuts with internal Allen Key (86-28**style) or torx security fitment (86-45*** style), for alloy wheels with small diameternut recess holes.
**indicates part number in following catalogue.
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
Wheel Locks
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Part Number
86 4020086 4040086 4060086 4070086 240905
4-PACK
Part Number
86 4220086 4240086 4260086 42700
4-PACK
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 4620086 4640086 4660086 46700
4-PACK
Acorn Mag XL Mag
Open Ended AcornHeadless Lock Style
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Part Number
86 4820086 4840086 4860086 4870086 48900
4-PACK
Socket Lock
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 4520086 4540086 4560086 45700
4-PACK
86 4060586 40705
5-PACK
12mm x 1.2512mm x 1.50
86 4260586 42705
5-PACK
12mm x 1.2512mm x 1.50
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
Wheel LocksAcorn Socket Lock
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 5020086 5040086 5060086 50700
Chrome Plated Lock Nut
Thread size
12mm x 1.50Conical
12mm x 1.50Ball
Part Number
86 41807
86 41808
Power TelescopeWrench
86 8607
Bulk Number
86 772.2000
Washers
Part Number
86 94686 94786 950
Length
1 1/2"1 1/2"1 1/2"
Thread size
12mm x 1.2512mm x 1.50
1/2
Wheel Studs
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
Lug Nuts
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 11302486 11304486 11306486 113074
Bulk Number
86 1002.5086 1004.5086 1006.5086 1007.5086 1009.50
86 1004L.50
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
1/2 Long
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 280286 280486 280686 2807
Open Ended AcornOEM Replacement
Style
One-Piece Acorn
Socket AcornBulge Acorn
Bulk Number
86 1902.5086 1904.5086 1906.5086 1907.50
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Blue Bulge Acorn
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 1702B86 1704B86 1706B86 1707B
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 1702R86 1704R86 1706R86 1707R
Red Bulge Acorn XL Mag
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 885286 885486 885686 8857
One-Piece Standard Mag
Bulk Number
86 1740.5086 1741.5086 1744.5086 1745.50
Part Number
86 174086 174186 174486 1745
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 144086 144186 144486 144586 1449
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
Lug NutsOpen End Bulge Acorn
Lug Nuts OEM Style
Thread size
7/161/2
12mm x 1.2512mm x 1.5014mm x 1.50
Part Number
86 1502186 1504186 1506186 150718615091
Deep Seat Spline AcornSuper Thin Lug Nut
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Key
Part Number
86 380286 380486 380686 380786 3800
Black Lug Nuts Black Mag Lug Nuts
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Thread size
7/161/2
12mm x 1.2512mm x 1.50
Part Number
86 820286 820486 820686 8207
Part Number
86 120286 120486 120686 1207
Thread size
12mm x 1.50Conical
12mm x 1.50Ball
Part Number
86 1807
86 1808
Chrome PlatedLug Nuts
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
LUG / LOCK -N– VALVE KIT
IDEAL FOR TOTAL REPLACEMENT RETAILERS TYRE DEALERS
COMPLETE KIT FOR 4 WHEELS AND 4 TYRESKIT CONTAINS:
16 Lug Nuts in Mag or steel 4 Lock Nuts (plus key) 4 valve stems Plus washers
MAG STYLE
7/16 86 7917401/2 86 7917411.25 86 7917441.5 86 791745
STEEL STYLE
7/16 86 7910021/2 86 7910041.25 86 7910061.5 86 791007
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
ValvesSnap In Valves
86 50565 PSI InflationChrome Finish0.453 x 2.42"
Long
86 50465 PSI InflationChrome Finish0.453 x 1.67"
Medium
86 520C65 PSI InflationChrome Finish0.453 x 1.30"
Short
Bolt On Valves
86577High Pressure
100 PSI0.453 x 1.73"
Medium
86 50265 PSI InflationChrome Finish0.453 x 1.50"
Medium
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
Hex Cap86 515
Chrome Cap86 504CS
Black Cap86 508BK
Valve Caps
Tyre Pressure Indicator Chrome Cap
NEW PRODUCTS
86 TP32M32 PSISet of 4
Chrome Cap with easy to read tyrepressure indicator. Replaces standardcaps. Check tyre pressure at a glance.Colour changes when under pressure.
86 TP36M36 PSISet of 4
Unit G, 2 Hudson Ave, Castle Hill NSW 2154Phone 02 8853 2900 Fax 02 8853 2999Email [email protected]
The Wheel Doctor®Quality Wheel Nuts and Accessories
AccessoriesThread Gauge Checker
86 TG6000Check Thread size
8 sizesMulti-coloured
3/4" & 13/16"
Dual Hex Socket Key
Steering Wheel Lock
86 WDSL4 Point Steering Wheel Lock
Lock Nut Key
86 LNKReplacement Key
Wheel Centre Inserts
Ideal for problem fits.Creates a “steel”
recessed style seat tomany applicationswhere fitment is
difficult or damaged.
86 W1620
Bulk Wheel Nut Bucket
Holds up to 200bulk wheel nuts.
Stackable and superstrong. Ideal for bulkwheel nut storage.
86 30230
NEW PRODUCTSNEW PRODUCTS
