THE WORLD’S THINNESTPOWERPOINTS AND SWITCHES

TRADITIONAL POWERPOINT10mm

AUSTRALIAN AND INTERNATIONAL PATENT

2mm

WAFER

The Wafer Advantage The wafer range fits off to standard plaster clip or bracket no need for expense recessed mounting accessories.

The wafer’s sleek curved edge gives the lowest profile possible, and the wafer’s malleable plates means a smooth fit. The wafer range is slimmer than slim it’s wafer thin The wafer range has architects talking from coast to coast

The Wafer Series of switches and power outlets are manufactured in accordance with AS/NZS3100 and AS/NZS3133 meeting all relevant Australian Standards, and complies with the latest wiring rules and exceeds all electrical supply authority standards.

WAFER SERIES

199 Parramatta Rd, HomebushNSW 2140

Phone : (02) 9764 - 2600Fax : (02) 9764 - 2629

The wafer range has a patented flush plate mounting system means no need for tricky paper templates.

Break the mold,hatch something di�erent

The biggest trend in switches and powerpoints is the slim profile. The Transco Wafer Series is the thinnest profile in the market, and the only retro fittable

WAFER SERIES

Other “slim”series haveedge pro�lesfrom 4mm to9mm onlythe TranscoWafer Serieshas a 2mmedge.

2mm

WAFER SERIES

The renovators choiceIn a world first the Transco Wafer Series is the only retro fittable thin profileseries. The Transco patentedflush plate mountingsystem allows forseamless exchange ofold chunky powerpointsand switches to the newwafer thin Transco.

Transco patentedflush plate mountingsystem

The only slim series to �t a standard pasterclip or bracket

POWER POINT SINGLESleek modern ultra thin single power pointon 2mm thin plate.CODE: P1W P1W/15RATING: 10A 15A

SWITCH 4 GANGSleek modern ultra thin four gang switchon 2mm thin plate.CODE S4W S4W/15RATING: 10A 15A

POWER POINT SINGLE WITH EXTRA SWITCHSleek modern ultra thin single power pointwith extra switch on 2mm thin plate.CODE: P1XW P1XW/15RATING: 10A 15A

POWER POINT TWINSleek modern ultra thin twin power pointon 2mm thin plate.CODE: P2W P2W/15RATING: 10A 15A

POWER POINT TWIN WITH EXTRA SWITCHSleek modern ultra thin twin power pointwith an extra switch on 2mm thin plate.CODE: P2XW P2XW/15RATING: 10A 15A

SWITCH 3 GANGSleek modern ultra thin three gang switchon 2mm thin plate.CODE S3W S3W/15RATING: 10A 15A

SWITCH 1 GANGSleek modern ultra thin single gang switchon 2mm thin plate.CODE: S1W S1W/15RATING: 10A 15A

SWITCH 2 GANGSleek modern ultra thin two gang switchon 2mm thin plate.CODE: S2W S2W/15RATING: 10A 15A

UNIVERSAL BLANKPLATESleek modern ultra thin universal plateon 2mm thin plate.CODE: UPW

POWER POINT SINGLE WITH TWO EXTRA SWITCHESSleek modern ultra thin single power pointwith extra switch on 2mm thin plate.CODE: P1XXW P1XXW/15RATING: 10A 15A

SWITCH 5 GANGSleek modern ultra thin five gang switchon 2mm thin plate.CODE S5W S5W/15RATING: 10A 15A

SWITCH 6 GANGSleek modern ultra thin six gang switchon 2mm thin plate.CODE S6W S6W/15RATING: 10A 15A

WAFER SERIES

WAFER SERIES

POWER POINT TWIN VERTICALSleek modern ultra thin twin power pointon 2mm thin plate.CODE: P2VWRATING: 10A

POWER POINT VERTICALSleek modern ultra thin twin power pointon 2mm thin plate.CODE: P1VWRATING: 10A

WAFER-SLEEK, MODERN, ULTRA THIN

When designing the Wafer series we had twogoals, to produce a switch that is as flush to the wall as possible and a switch that all electricians could fit to any wall, with ease.

The Transco Wafer series has achieved boththe design criterion, with a 2mm edge profileand the patented flush plate mountingsystem. If your project needs the best insiston Transco Wafer.

COLOURED COVER PLATES

All coloured switch cover plates are optional for all of the wafer series.CODE: S1WC/SC ~ S4CW/SC

Sleek modern ultra thin one, two, three & four gang switch on 2mm thin plate.

SWITCH ARCHITRAVE 1 GANGSleek modern ultra thin single gang switchon 2mm thin plate.CODE: AS1W AS1W/15 RATING: 10A 15A

SWITCH ARCHITRAVE 2 GANGSleek modern ultra thin single gang switchon 2mm thin plate.CODE: AS2W AS2W/15 RATING: 10A 15A

BODY AND COVER ONLYSleek modern ultra thin single, two, three, four five and six gang body and cover with no mechs.2mm thin plate. CODE: S1W/BC ~ S6W/BC

LIGHT DIMMERSleek modern ultra thin single gang switchon 2mm thin plate.300W dimmer mech and switch for incandescent, low voltage and fan loads. EMC Approved.CODE: LDW

PAY TV SOCKETSleek modern ultra thin single gang switchon 2mm thin plate. 75 ohm coax mech used for free to air.CODE: TVPW

TV COAX SOCKETSleek modern ultra thin single gang switchon 2mm thin plate. 75 ohm coax mech used for free to air.CODE: TVW

RJ45 SOCKETSleek modern ultra thin single gang switchon 2mm thin plate. CODE: RJ1W

WAFER SERIES

WAFER SERIES

DOUBLE POWER POINT

SINGLE POWER POINT WITH EXTRA SWITCH

SINGLE POWER POINT

SWITCH MECHS INTERMEDIATE

CODE: IMSW IMSW20RATING: 10A 20A

SWITCH MECHS DOUBLE POLE

CODE: DPSW DPSW/15 DPSW/20RATING: 10A 15A 20A

WAFER SERIES

WAFER SERIES

SWITCH MECHS LABELED 35AOther engraved labels upon request.CODE: SMW35/OVEN SMW35/STOVETYPE: OVEN STOVECODE: SMW35/RANGE SMW35/COOKTYPE: RANGE COOKCODE: SMW35/HOBTYPE: HOB

SWITCH MECHS LABELED 20AOther engraved mechs available upon request.CODE: SMW20/HWS SMW20/AIRCON TYPE: HOT WATER SERVICE AIR CONDITIONER

SWITCH MECHS LABELEDOther engraved mechs available upon request.CODE: SMW/FAN SMW/LIGHT SMW/HEATTYPE: FAN LIGHT HEATOther available labels:BED,LIVING,ZONE,SPA,DISPOSAL,ON/OFFMICRO,WASH,WASTE,FRIDGE,HOOD,PRESS

SWITCH MECHSBlack mechs are also available.CODE: SMW SMW15 SMW20 SMW35 RATING: 10A 15A 20A 35A

Part Number Description

SMW1010A, 240V, 1 WAY/2 WAY 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 100

SMW1515A, 240V 1 WAY/2 WAY 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 90

SMW2020A, 240V 1 WAY/2 WAY 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 90

SMW3535A, 240V 1 WAY/ 2 WAY 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 160

IMSW10 10A, 240V INTERMEDIATE 3.5mm Dia TERMINAL BORES TO SUIT 2 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole

IMSW20 20A, 240V INTERMEDIATE 3.5mm Dia TERMINAL BORES TO SUIT 2 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole

DPSW1010A, 240V 1 WAY DOUBLE POLE SINGLE THROW 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 90

DPSW1515A, 240V 1 WAY DOUBLE POLE SINGLE THROW 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 90

DPSW2020A, 240V 1 WAY DOUBLE POLE SINGLE THROW 4.1mm Dia TERMINAL BORES TO SUIT 4 x 1.5mm sq or 3 x 2.5mm sq CABLES BODY FITS 22mm Dia Hole M Rating is 100

STANDARD SWITCH

INTERMEDIATE SWITCH

DOUBLE POLE SWITCH

WAFER SERIES