Thermal Printer Thermalnestconnectivitysolutions.com/upload/product/... · Printed with Vegetable oil ink. This catalog is made from recycled paper. Specifications are subject to

Printed with Vegetable oil ink. This catalog is made from recycled paper.

Specifications are subject to change without notice.

ESC/POS and ESC/P are registered trademarks of SEIKO EPSON Corporation.

Windows is the registered trademark of Microsoft Corporation (USA).

Linux is a registered trademark of Linus Torvalds in the United States and / or other countries.

Company and product names are trademarks or registered trademarks of their respective companies.

We have completed making all of our printers compliant with the RoHS directive. Printed in Mar.2011

Homepage http://www.sii-ps.comSeiko Instruments Inc.Print System Div.8, Nakase 1-chome, Mihama-kuChiba-shi, Chiba 261-8507, JapanTelephone:+81-43-211-1106 　Facsimile:+81-43-211-8037Seiko Instruments USA Inc.2990 Lomita Blvd., Torrance, CA 90505, USA.Telephone:+1-310-517-7778 Facsimile:+1-310-517-8154

Seiko Instruments GmbHSiemensstrasse 9 D-63263 Neu-Isenburg, GermanyTelephone:+49-6102-297-0 Facsimile:+49-6102-297-222E-mail : [email protected]

Seiko Instruments (H.K.) Ltd.4-5 / F, Wyler Center 2, 200 Tai Lin Pai Road, Kwai Chung,N.T., Kowloon, Hong KongTelephone:+852-2494-5160 Facsimile:+852-2424-0901

Seiko Instruments Taiwan Inc. 6F, No.236,Sec.2,Jianguo N.Rd.,Taipei 104,Taiwan,R.O.C.Telephone:+886-2-2516-8518 Facsimile:+886-2-2516-1186

All products shown on this document are complied with requirements by ISO9001 and manufactured under quality management system certified by Bureau Veritas Japan.

1-1103-1200/MP/MS Printed in Japan

!

!

!

!

!

!

Product catalog 2011-2012

T h e r m a lP r i n t e r


http://www.sii-ps.com


SAFETY PRECAUTIONS

1. This catalog provides a summary of product specifications. Before using each product, please thoroughly read the technical manual, user's manual, and other manuals which have been prepared by us.

2. The products listed in this catalog are not allowed to be used as part of any life-support system or any other equipment or system which requires extremely high reliability, without our permission in writing.

3. When using each product, thoroughly understand the specifications of the product, observe the descriptions and markings for prevention and avoidance of danger, on your products and in the documents such as the manual, and advise and guide your customers (users).

1. Because of our continuous research for improvements, the contents in this catalog may be changed without prior notice.

2. Since the photo of each product is printed, the color of the photo may be different from that of the real product. Before use, please check the actual color of the product.

3. Concerning the use of information, drawings, etc. in this catalog, we shall not guarantee the industrial property, intellectual property, and other rights of a third party or grant their licenses. Accordingly, we will not assume responsibility for violation of the third party's rights attributable to such use.

4. No part of this catalog may be reprinted. reproduced or used for other purposes without our written permission.

5. Warranty is limited to the product unit delivered. We will be exempted from responsibility for any damage which may be caused by any defect of this product.

GENERAL NOTES

Direct thermal technology produces an image by applying a heating element to specially treated thermal paper.

Unlike other printing formats, it operates with few moving parts and does not consume toner or ribbons.

This translates into reliable long-life performance and reduced maintenance costs.

With precision engineering Seiko Instruments continues to build on direct thermal’s advantages.

We offer a complete line of reliable high performance printers with flexible, small footprint designs that help

streamline the integration process. Rely on dependable Seiko Instruments printers and components to tackle even the

toughest thermal printing requirements.

EFT-POS When you pay by card...

2 inch

Low Voltage

Small-footprint

High speed printing

2 to 3 inch

Small-footprint

2 to 4 inch

Quiet

Chart printing

2 to 4 inch

Presenter

Auto cutter

EFT-POS (Electronic Funds Transfer at Point of Sale) isexpanding market with rise in demand!

Why direct thermal?

Medical Measuring When you use the medical or measurement equipment...

POS/ECR When you go to shopping...

Best for data and chart printing,what is more easy maintenance and quiet!

CD/ATM Kiosk Lottery When you use the KIOSK terminal...

Why direct thermal printingProduct Classification TablePeripherals Guide

Low VoltageLTPD245/345, CAPD245/345, LTPJ245 Series

LTPU245, LTPA245, LTPZ245

LTPV Series, LTP8235

24 VoltCAPM347, LTPD247/347, CAPD247/347

CAPG247, LTPG247,LTPF Series

CAP9000 Series, LTP9000 Series

LTP2000 Series

Mobile PrinterDPU-S245, DPU-S445

MPU-L465 Series

POS PrinterRP-B10

Standalone Printer UnitDPU-414

Panel-Mount Printer UnitDPU-D2/D3

Sub-assembled Printer UnitAPU-9000-C Series, APU-G247

APU-2242, KPU Series

Serial PrinterMTP Series

Other Models Line upLTP1245, LTPH245, CAPC Series

LTPC Series, LTP3445, STP Series

DPU-30, DPU-12, DPU-E247, SAM-1245

APU-F247 Series, APU-9347-B02

Thermal Paper List

CONTENTS 2011-2012 Thermal Printer Product Catalog Direct thermal printers are widely usedin everyday life, including medical devices, self-service technology, point-of-sale, mobile applications, and more.

SII Thermal Printer is quiet, cleanness and easy maintenance which has

been adapted for the medical and the measurement equipment for

long time.

SII's wide-variety of product line helps any printing demands on

self-service terminal / ATM / ticketing applications.

In recent years, thermal printer is widely used for ECR market expected

higher cost-effective, and for POS market expected sophisticated-

features & heavy-duty.

SII offers best solution of thermal printing to EFT-POS market since its

dawn. SII Thermal Printer has contributed to spread thermal printing

technology in EFT-POS market and became our bestseller mechanism.

Reliable SII’s thermal printers are the best matches with the KIOSK terminals printing receipt and ticket and so on!

Using thermal printer in ECR (Electronic Cash Register) has been started in European market and Now spread throughout the world!

RP-B10

LTPJ245 LTPZ245

LTPA245

LTPD Series

CAPD Series

Direct thermal technology produces an image by applying a heating element to specially treated thermal paper.

Unlike other printing formats, it operates with few moving parts and does not consume toner or ribbons.

This translates into reliable long-life performance and reduced maintenance costs.

With precision engineering Seiko Instruments continues to build on direct thermal’s advantages.

We offer a complete line of reliable high performance printers with flexible, small footprint designs that help

streamline the integration process. Rely on dependable Seiko Instruments printers and components to tackle even the

toughest thermal printing requirements.

EFT-POS When you pay by card...

2 inch

Low Voltage

Small-footprint

High speed printing

2 to 3 inch

Small-footprint

2 to 4 inch

Quiet

Chart printing

2 to 4 inch

Presenter

Auto cutter

EFT-POS (Electronic Funds Transfer at Point of Sale) isexpanding market with rise in demand!

Why direct thermal?

Medical Measuring When you use the medical or measurement equipment...

POS/ECR When you go to shopping...

Best for data and chart printing,what is more easy maintenance and quiet!

CD/ATM Kiosk Lottery When you use the KIOSK terminal...

Why direct thermal printingProduct Classification TablePeripherals Guide

Low VoltageLTPD245/345, CAPD245/345, LTPJ245 Series

LTPU245, LTPA245, LTPZ245

LTPV Series, LTP8235

24 VoltCAPM347, LTPD247/347, CAPD247/347

CAPG247, LTPG247,LTPF Series

CAP9000 Series, LTP9000 Series

LTP2000 Series

Mobile PrinterDPU-S245, DPU-S445

MPU-L465 Series

POS PrinterRP-B10

Standalone Printer UnitDPU-414

Panel-Mount Printer UnitDPU-D2/D3

Sub-assembled Printer UnitAPU-9000-C Series, APU-G247

APU-2242, KPU Series

Serial PrinterMTP Series

Other Models Line upLTP1245, LTPH245, CAPC Series

LTPC Series, LTP3445, STP Series

DPU-30, DPU-12, DPU-E247, SAM-1245

APU-F247 Series, APU-9347-B02

Thermal Paper List

CONTENTS 2011-2012 Thermal Printer Product Catalog Direct thermal printers are widely usedin everyday life, including medical devices, self-service technology, point-of-sale, mobile applications, and more.

SII Thermal Printer is quiet, cleanness and easy maintenance which has

been adapted for the medical and the measurement equipment for

long time.

SII's wide-variety of product line helps any printing demands on

self-service terminal / ATM / ticketing applications.

In recent years, thermal printer is widely used for ECR market expected

higher cost-effective, and for POS market expected sophisticated-

features & heavy-duty.

SII offers best solution of thermal printing to EFT-POS market since its

dawn. SII Thermal Printer has contributed to spread thermal printing

technology in EFT-POS market and became our bestseller mechanism.

Reliable SII’s thermal printers are the best matches with the KIOSK terminals printing receipt and ticket and so on!

Using thermal printer in ECR (Electronic Cash Register) has been started in European market and Now spread throughout the world!

DPU-414

LTPV Series

DPU-S445

APU-9000-C Series

KPU SeriesAPU-G247

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

3

Classification

Low voltage

24 volt

Product

CAPD245

CAPD345

LTPD245*1

LTPD345*1

LTPU245

LTPJ245

LTPA245

LTPZ245

LTPV345

LTPV445

LTP8235

CAPM347

CAPD247

CAPD347

LTPD247

LTPD347

CAPG247

LTPG247

LTPF247

LTPF347

CAP9247

CAP9347

LTP9247

LTP9347

LTP2242

LTP2342

LTP2442

Paper width(mm)

58

80

58

80

58

58

58

58

80

112

58

*2

58

80

58

80

58

58

58

80

58 / 60

80 / 82.55

58 / 60

80 / 82.55

60

80

112

Resolution(dots / mm)

8

8

8

8

8

8

8

8

8

8

6

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

8

Product

MTP102-16B

MTP201-20B

MTP201-24B

MTP401-40B

MTP201-G128

MTP201-G166

MTP401-G280

DPU-S245

DPU-S445

MPU-L465

RP-B10

DPU-D2

DPU-D3

DPU-414

APU-9247-C

APU-9347-C

APU-G247

APU-2242

KPU-S347

Paper width(mm)

38

58

58

80

58

58

80

58

112

70 to 115

58 / 80

58

80

112

58 / 60

80 / 82.55

58

60

*3

Resolution(dots / mm)

-

-

-

-

-

-

-

8

8

(300dpi)

8

8

8

-

8

8

8

8

8

Dot composition(H x W)

7 x 110

7 x 138

7 x 166

7 x 278

8 x 128

8 x 166

8 x 280

-

-

-

-

-

-

9 x 320

-

-

-

-

-

*3 58mm, 60mm, 66mm, 76.2mm, 80mm, 82.55mm

*1 Available loading model *2 58mm, 60mm, 80mm, 83mm

Product category

Easy paper operation mechanism

Loading mechanism

Easy paper operation mechanism

Loading mechanism

Product category

Serial Printer

Mobile printer

POS printer

Panel-mount printer unit

Standalone printer unit

Sub-assembled printer unit

Thermal Printer

Product Classification Table

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

4

Product category

Mobile printer

POS printer

Standaloneprinter unit

Sub-assembledprinter unit

Classification

Low voltage

24 volt

Serial Printer

Product

CAPD245

CAPD345

LTPD245

LTPD345

LTPJ245D

LTPJ245G

LTPU245

LTPA245

LTPZ245

LTPV345LTPV445

LTP8235

CAPM347

CAPD247

CAPD347

LTPD247

LTPD347

CAPG247LTPG247

LTPF247F

LTPF347F

LTPF247E

LTPF347E

CAP9247

CAP9347

LTP9247

LTP9347

LTP2242

LTP2342

LTP2442

MTP102MTP201MTP401

Auto cutter

Included

Included--

-

-

-

-

-

-

-

Included

IncludedIncluded

--

Included-

ACUF224

ACUF324

ACUF224

ACUF324

Included

Included-

-ACU2224ACU2324

ACU2424

-

Interface

IFD501-01UKIFD501-01SK

-

-

-

-

-

IFV101-01B/01BK

-

IFM201

IFD001-01UK

IFD001-01SK

IFG001-03SK/03UK

IFF001-02B/02BK

-

IF9001-03S/03U

IF2303-01B/01BK

IFM001-01B/01B-C

CPU

PTD50P01

PTJ00P01

-

-

-

-

PTV10P01

PT800P01

PTM20

PTD00P01

PTG00P-01

PTF00P01

PTF20P01

-

PT230P01

PTM01P01

PTM01F01

Winder unit

-

-

-

-

-

-

-

-

-

-

-

WU282

WU282

-

-

-

-

-

Product

DPU-S245

DPU-S445

MPU-L465

RP-B10

DPU-414

KPU-S347

Power supply

PW-D0940-W1

PW-D0940-W1

PW-0904-W2

PW-A2421-W1

PW-4007-JU1

PW-C0725-W1-E

PW-C0725-W1-C

PW-C0725-W1-K

PW-C0725-W1-B

PW-C0725-W1-A

PW-K024-W1

Battery pack

BP-L0715

BP-L0720

BP-L0720

-

BP-4005

BP-4005

-

Battery charger

PWC-L07A1

PWC-L07A1

PWC-L07A1

-

-

-

-

Other

Carring case

CVR-C01-1

Carring case

CVR-B01-1

-

Wall mounting kit WLK-A01-1

Vertically mounting kit VTK-A01-1

-

-

-

Power cable

CB-JP04-18A

CB-US04-18A

CB-CE01-18B

CB-UK01-20A

CB-JP04-18A

CB-US04-18A

CB-CE01-18B

CB-CH01-20A

CB-UK01-20A

CB-AU01-20A

CB-JP04-18A

CB-US04-18A

CB-JP03-20A

CB-US03-20A

CB-CE03-20A

CB-UK02-20A

CB-JP04-18A

CB-US04-18A

-

-

-

-

-

CB-J06-20A

CB-A03-U2

CB-A01-E2

Thermal Printer

Peripherals Guide

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

5

Model

LTPD245 / 345

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec) maxPaper pathHead temperaturePlaten position Out of paper Operation voltage (Vdd)Operation voltage (Vp)

Head

MotorPulse activation (pulse)Abrasion resistance (km)

HorizontalVertical

Printing

Detection

Powersupply (V)

Peakcurrent (A)

Service Life

Operating temperature (˚C)

Dimensions (W x D x H mm)

Mass (g)

*1 Use recommended thermal papers. *2 Excluding protrusion. *3 -30˚C to 70˚C: supported by designated conditions only.

Thermal Printer Mechanism

High performance in compact designMax. printing speed (LTPD245): 100mm/secPlaten latch functionLabel printing *Under specific conditions only.

Windows® driver (XP / Vista / 7) *32bit

OPOS driver (XP) *In use with IFD501-01SK/01UK

Linux driver

HMPLWWOLO

+0-1

+0-1

LTPD245

384

58 48

100

69.0 x 30.0 x 15.0 *2

69.0 x 15.0 x 30.0 *2

Approx. 40

LTPD345

576

80 7280

91.0 x 30.0 x 15.0 *2

91.0 x 15.0 x 30.0 *2

Approx. 58

Thermal line dot printing

8

CurvedBy thermistor

By mechanical switchBy photo interrupter

2.7 to 3.6 / 4.75 to 5.25

4.75 to 9.5

0.6100 million

50 *1

-10 to 50*1 *3

3.66 (9.5V/64dots)5.49 (9.5V/96dots)

3.60 (9.5V/64dots)5.40 (9.5V/96dots)

EFT/POS MeasuringInstrument

PortablePrinter

POS/ECR MedicalEquipment

BarcodeE

Label

Extended graphics character setKatakana character setCodepage 1252Optional fontDownloaded characterUser-defined characterJIS 1&2 level kanji

Interface CPU

Thermal printerPackage formOperating voltage (V)Operating frequency (MHz)ConfigurationCommunication interfaceCharacter type

Character matrix(H x W dots)


ModelModel

*4 CG ROM: Japanese

CPUThermal printerOperating voltage (V)

Character matrix (H x W dots)

Charactertype

Communication interfaceDimensions (W x D x H mm)

PTD50P01LTPD245, LTPD345, CAPD245, CAPD345

Vp:4.75 to 9.5

16 dots characters : 16 x 8, 16 x 1624 dots characters : 24 x 12, 24 x 24

69.0 x 50.0 x 14.0

IFD501-01UK

YesYesYesYesYesYesYes

USB (2.0)

IFD501-01SK


Serial (RS-232C)


120pin QFPVp:4.75 to 9.5, Vcc: 3.0 to 3.6

12 +/- 0.01%C-MOS LSI

Parallel, Serial, USB

Extended graphics character set, Other characters is availablewith CGs*4 or external ROM

16dots characters : 16 x 8, 16 x 1624dots characters : 24 x 12, 24 x 24

16.0 x 16.0 x 1.7

LTPD345 (Horizontal)

IFD501-01UK IFD501-01SK

LTPD245 (Vertical)

Thermal Printer

Easy Paper Operation MechanismLowVoltage

24V

mobile

POS

StandalonePrinter Unit

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

6

CAPD245/345Thermal Printer Mechanism

Build in auto paper cutterJam-free cutter designMax. printing speed (CAPD245) : 100mm/secPlaten latch functionWindows® driver (XP / Vista / 7) *32bit


Linux driver


POS/ECR TicketPrinter

KIOSKSystem

Gas-Pos MedicalEquipment

CAPD245

384

58 48

100

4.75 to 9.5

3.66 (9.5V/64dots)5.49 (9.5V/96dots)

83.1×35.4×26.9*2

Approx. 125


8

CurvedBy thermistor

By mechanical switchBy photo interrupterBy photo interrupter

2.7 to 3.6 / 4.75 to 5.25

0.60.7

Slide type54 to 80*1

Full cut / Partial cut (Leave center point)Approx. 1.0

1030

100 million 50*1

500,000*1

-10 to 50

ModelMethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperaturePlaten positionOut of paperCutter home position Operation voltage (Vdd)Operation voltage (Vp)

Head

MotorCutterMethodPaper thickness (µm)Cutting typeOperating time (sec/cycle)maxCutting pitch (mm)minCut frequency (cut/min)maxPluse activationAbrasion resistance (km)Life(cut)

Printing

Detection

Powersupply (V)

Peakcurrent (A)

Auto cutter

Service life

Operating temperature (˚C)Dimensions (W x D x H mm)Mass (g)

+0-1

CAPD345

576

80 7280

6.5 to 9.53.60 (9.5V/64dots)5.40 (9.5V/96dots)

105.1×35.4×27.2*2

Approx. 148

+0-1

Interface / CPU

USB interface boardSerial interface boardCPU

ModelIFD501-01UKIFD501-01SKPTD50P01

*1 Use recommended thermal papers *2 Excluding mounting part

*Interface boards and CPU are mutual options with LTPDX45 series.

*Please see P.5 for details.

CAPD245

CAPD345

Thermal Printer


24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

7

CPUCPUPTJ00P01

LTPJ245D *3

100pin TQFPVp:5.5 to 9.5, Vcc: 3.0 to 3.6

22.1184 +/- 0.5%C-MOS LSI

Parallel, Serial, USBExtended graphics character set, Other characters is available with CGs *4 or external ROM


16.0 x 16.0 x 1.2

ModelThermal printerPackage formOperating voltage (V)Operating frequency (MHz)ConfigurationCommunication interfaceCharacter type



*3 Suport LTPD245D only *4 CG ROM: Japanese

LTPJ245GLTPJ245DModel

+0-1

MethodNumber of dots / lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperatureOut of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

Printing

Detection

Power supply (V)

Peak current (A)

Service life

Operating temperature (˚C) Dimensions (W x D x H mm)Mass (g)

Thermal line dot printing384

8584875

StraightBy thermistor

By photo interrupter

5.5 to 9.5

0.6100 million pulses

50 *1

-10 to 50

3.0 to 3.6 / 4.75 to 5.25

3.6 (9.5V / 64dots on)

68.5 x 31.5 x 22.0 *2

Approx.39

3.0 to 3.6

2.49 (9.5V / 45dots on)

68.5 x 36.5 x 22.0 *2

Approx.38

*1 Use recommended papers *2 Excluding protrusion

The highly innovative latch mechanism provides most natural and easiest operation when paper reloading.

New latch mechanism

EFT/POS PortablePrinter

Max. printing speed: 75mm/secCompact and light-weightFront open mechanismwith latch function

MCF

LTPJ245 SeriesThermal Printer Mechanism

*Layout image

OPENOPENOPEN

LeverOne action

LTPJ245D

LTPJ245G

Thermal Printer


24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

8

CPUCPUPTJ00P01

LTPJ245D *3

100pin TQFPVp:5.5 to 9.5, Vcc: 3.0 to 3.6

22.1184 +/- 0.5%C-MOS LSI

Parallel, Serial, USBExtended graphics character set, Other characters is available with CGs *4 or external ROM


16.0 x 16.0 x 1.2




*3 Suport LTPD245D only *4 CG ROM: Japanese

LTPJ245GLTPJ245DModel

+0-1

MethodNumber of dots / lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperatureOut of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

Printing

Detection

Power supply (V)

Peak current (A)

Service life



8584875


By photo interrupter

5.5 to 9.5

0.6100 million pulses

50 *1

-10 to 50

3.0 to 3.6 / 4.75 to 5.25

3.6 (9.5V / 64dots on)

68.5 x 31.5 x 22.0 *2

Approx.39

3.0 to 3.6

2.49 (9.5V / 45dots on)

68.5 x 36.5 x 22.0 *2

Approx.38

*1 Use recommended papers *2 Excluding protrusion

The highly innovative latch mechanism provides most natural and easiest operation when paper reloading.

New latch mechanism


Max. printing speed: 75mm/secCompact and light-weightFront open mechanismwith latch function

MCF

LTPJ245 SeriesThermal Printer Mechanism

ModelMethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec) maxPaper pathHead temperatureOut of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

Printing

Detection

Powersupply (V)

Peakcurrent (A)

Service life


*1 Use recommended thermal papers. *2 Excluding protrusion.


Max. printing speed: 75mm/secExtremely compact design Light weight only 30gPlaten latch function

MELP

+0-1

LTPU245Thermal line dot printing

3848

58 4875

CurvedBy thermistor

By photo interrupter3.0 to 3.6 / 4.75 to 5.25

5.5 to 9.53.66 (9.5V / 64dots on)

0.6100 million

50 *1

-10 to 5069.8 x 17.3 x 25.0 *2

Approx. 30

LTPU245EFT/POS Portable

Printer

LTPU245

Thermal Printer


24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

9

70.1 x 32.7 x 15.3 *2

Approx.4470.1 x 21.8 x 31.0 *2

Approx.46

LTPA245Model

+0-1

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperatureOut of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

Printing

Detection

Power supply (V)

Peak current (A)

Service life



8584890

CurvedBy thermistor


4.5 to 8.52.6 (8.5V / 64 dots)

0.6100 million

50 *1

0 to 50 69.2 x 28.3 x 31.7 *2

Approx.42

*1 Use recommended thermal papers *2 Excluding protrusion

ModelThermal line dot printing

3848

584875

CurvedBy thermistor


4.2 to 9.53.60 (9.5V / 64dots on)

0.6100 million

50 *1

-20 to 50

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperatureOut of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

LTPZ245(Horizontal) LTPZ245(Vertical)

Printing

Detection

Power supply (V)

Peak current (A)

Service life

Operating temperature (ºC)Dimensions (W x D x H mm) Mass (g)


+0-1



PortablePrinter


Max printing speed: 90mm/secCompact and light-weightPlaten latch function

MCP

Max. printing speed: 75mm/secCompact and light-weightOperating temperature: -20˚C to 50˚C

MCO

LTPA245Thermal Printer Mechanism

LTPZ245Thermal Printer Mechanism

LTPA245

LTPZ245(Vertical)

LTPZ245(Horizontal)

Thermal Printer


24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

10

Model

+0-1

+0-1Printing

Detection

Power supply (V)

Peak current (A)

Service life



8

85Straight

By thermistorBy mechanical switchBy photo interrupter

4.5 to 5.54.2 to 8.5

3.33 (8V / 64 dots) 1.0

100 million 50 *1

0 to 50

576

80 72

93.0 x 34.5 x 39.5 *2

Approx.95

832

112 104

125.0 x 34.5 x 39.5 *2

Approx.115

Interface

CPUThermal printerOperating voltage (V)Character matrix (H x W dots)

Charactertype


PTV10P01LTPV345, LTPV445

Vp:4.2 to 8.5, Vcc: 4.5 to 5.516 dots characters : 16 x 8, 16 x 16 24 dots characters : 24 x 12, 24 x 24

Parallel, Serial (TTL)70.0 x 60.0 x 10.6

Model IFV101-01B

YesNoYesYesYesNo

IFV101-01BK

YesYesYesYesYesYes

CPUPTV10P01

LTPV345, LTPV445128pin QFP

Vp:4.2 to 8.5, Vcc:4.5 to 5.518.43 +/- 0.5%

C-MOS LSIParallel, Serial

Extended graphics character set, Other characters is available with CGs *3 or external ROM


22.0 x 16.0 x 3.1




Extended graphics character setKatakana character setOptional fontDownloaded characterUser-defined characterJIS 1&2 level kanji

MeasuringInstrument

PortablePrinter

LabelBarcode MedicalEquipment

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec max)Paper pathHead temperaturePlaten position Out of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotor Pulse activation (pulse) Abrasion resistance (km)

LTPV SeriesThermal Printer Mechanism

LTPV345 LTPV445


*3 CG ROM: Japanese, Korean

Max printing speed: 85mm/sec Platen latch functionLabel printingSupport thick paper: up to 135µm*1

MPLS

LTPV345

Thermal Printer


24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

11

Model

+0-1Printing

Detection

Power supply (V)

Peak current (A)

Service life



6584860

CurvedBy thermistor

By photo interupter4.5 to 5.56.0 to 8.0

4.6 (8V / 144 dots)0.81 (8V)50 million 50 *1

0 to 50 72.0 x 38.0 x 15.6 *2

Approx.50


CPUPT800P01LTP8235

80pin QFPVp:6.0 to 8.0, Vcc:4.5 to 5.5

5 +/- 0.5%C-MOS LSI

Parallel, Serial Extended graphics character set, Other characters is available with CGs *1 or external ROM


17.2 x 17.2 x 1.7




MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperatureout of paperOperation voltage (Vdd)Operation voltagew (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (Km)

Max printing speed: 60mm/secCompact and light-weightResolution: 6 dots/mm

MCR

MeasuringInstrument

PortablePrinter


Calculator

LTP8235Thermal Printer Mechanism

LTP8235

*1 CG ROM: Japanese

LTP8235

Thermal Printer

Loading MechanismLowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

12

Max printing speed: 300mm/sec*1

Built-in auto-cutterHead open design for easy paper operationHeavy-duty : 200km, 2mil. cuts*3

Wide operating temperature : -20˚C to 60˚CWindows® driver (XP / Vista) *32bit

OPOS driver (XP) *In use with IFM201

Linux driver

MBH

WWWWOL

H

CAPM347Thermal Printer Mechanism

MeasuringInstrument


KIOSKSystem

Model

Printing

Detection

Powersupply(V)

Peakcurrent(A)

Auto Cutter

Service life

Operating temperature(˚C)Dimensions (WxDxH mm)Mass (g)


858+

-01 / 60+

-01 / 80+

-01 / 83+

-01

54 / 56 / 72 / 80 300*1



By photo interrupter*2


21.6 to 26.45.6 (26.4V/144dots)

1.21.1

Slide type 54 to 80*3

Full cut / Partial cut (Leave center point)0.42030

200 million 200*3

2,000,000*3

-20 to 60*1

110.0 × 61.0 × 53.4Approx. 500

MethodNumber of dots/lineResolution(dots/mm)Paper width(mm)Printing width(mm)Speed(mm/sec)maxPaper pathHead temperatureHead positionOut of paperMarkCutter home positionOperation voltage(Vdd)Operation voltage(Vp)HeadMotorCutterMethodPaper thickness (µm)*1

Cutting typeOperating time(sec/cycle)maxCutting pitch(mm)minCut frequency(cut/min)maxPluse activationAbrasion resistance(km)*1

Life(cut)

CAPM347

*1 Under specified condition *2 80mm/83mm paper width only *3 Use recommended thermal papers

Interface CPU

Thermal printerPackage formOperating voltage (V)Operating frequency (MHz)ConfigurationCommunication interface

Character type



PTM20CAPM347

144pin QFPVp:21.6 to 26.4, Vdd: 3.0 to 3.6

12 +/- 0.01%C-MOS LSI




22.0 x 22.0 x 1.7

ModelModel

*4 CG ROM: Japanese



Character type


IFM201

USB (2.0) or Serial (RS-232C)

PTM20CAPM347

Vp:21.6 to 26.4


60.0 x 80.0 x 14.0

Extended graphics character set,Katakana character set,

Codepage (437, 850, 852, 858 and 1252),JIS 1st and 2nd level Kanji, NEC special characters,NEC selection of IBM extensions, IBM extensions,Downloaded character, User-defined character,

Optional font

CAPM347

Thermal Printer

Easy Paper Operation Mechanism

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

13

Model

LTPD247 / 347

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec) maxPaper pathHead temperaturePlaten position Out of paper Operation voltage (Vdd)Operation voltage (Vp)

Head

MotorPulse activation (pulse)Abrasion resistance (km)

HorizontalVertical

Printing

Detection

Powersupply (V)

Peakcurrent (A)

Service life

Operating temperature (˚C)


Mass (g)



High performance in compact designMax. printing speed (LTPD247): 200mm/secPlaten latch functionLabel printing *Under specific conditions only.

Windows® driver (XP / Vista / 7) *32bit


Linux driver

HMPLWWOL

+0-1

+0-1

LTPD247

432

58 54

200

71.0 x 30.0 x 15.0 *2

71.0 x 15.0 x 30.0 *2

Approx. 56

LTPD347

576

80 72

170

91.0 x 30.0 x 15.0 *2

91.0 x 15.0 x 30.0 *2

Approx. 64


8

CurvedBy thermistor


2.7 to 3.6 / 4.75 to 5.25

21.6 to 26.42.61 (26.4V/144dots)5.23 (26.4V/288dots)

0.44100 million

100 *1

-10 to 50

MeasuringInstrument


Barcode KIOSKSystem E

Label

Extended graphics character setKatakana character setCodepage 1252Optional fontDownloaded characterUser-defined characterJIS 1&2 level kanji

Interface CPU


Character type



ModelModel

*1 CG ROM: Japanese



Charactertype



Vp:21.6 to 26.4


69.0 x 50.0 x 14.0

IFD001-01UK


USB (2.0)

IFD001-01SK


Serial (RS-232C)



12 +/- 0.01%C-MOS LSI




16.0 x 16.0 x 1.7

IFD001-01UK IFD001-01SK

LTPD347(Vertical)

LTPD247 (Horizontal)

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

14

Printing

Detection

Powersupply(V)

Peakcurrent(A)

Auto cutter

Service life


Build in auto paper cutterJam-free cutter designMax. printing speed (CAPD247) : 200mm/secPlaten latch functionWindows® driver (XP / Vista / 7) *32bit


Linux driver

ModelMethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperaturePlaten position Out of paper Cutter home position Operation voltage (Vdd)Operation voltage (Vp)

Head

MotorCutterMethodPaper thickness (µm)Cutting typeOperating time (sec/cycle)maxCutting pitch (mm)minCut frequency (cut/min)maxPluse activationAbrasion resistance (km)Life (cut)

Interface / CPU

USB interface boardSerial interface boardCPU

ModelIFD001-01UKIFD001-01SKPTD00P01

*1 Use recommended thermal papers *2 Excluding mounting part

CAPD247

432

58 54

200

83.1×35.4×26.9*2

Approx. 131


8

CurvedBy thermistor

By mechanical switchBy photo interrupterBy photo interrupter

2.7 to 3.6 / 4.75 to 5.2521.6 to 26.4

2.61 (26.4V/144dots)5.23 (26.4V/288dots)

0.440.64

Slide type54 to 80*1

Full cut / Partial cut (Leave center point)Approx. 0.5

1030

100 million100*1

1,000,000*1

-10 to 50

+0-1

CAPD347

576

80 72

170

105.1×35.4×27.2*2

Approx. 154

+0-1

*Interface boards and CPU are mutual options with LTPDX47 series.

*Please see P.13 for details.

CAPD247/347Thermal Printer Mechanism



KIOSKSystem

Gas-Pos MedicalEquipment

CAPD247

CAPD347

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

15

Winder unit

Thermal printerPaper width (mm) Paper thickness (µm)Outside diameter of paper roll (mm)maxInside diameter of paper roll (mm)minOperating voltage (V)Speed (mm/s)maxLife (operating hours)Dimensions (W x D x H mm)Mass (g)

Model WU282LTPG247

58

70 to 80φ83φ20

21.6 to 26.4220160

87.8 x 92.0 x 97.6Approx.136

+0-1

ModelMethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperaturePlaten position Out of paper Cutter home positionOperation voltage (Vdd)Operation voltage (Vp)HeadMotorCutterMethodPaper thickness (µm)Cutting typeOperating time (sec/cycle)maxCutting pitch (mm)min Cut frequency (cut/min)maxPulse activation (pulse)Abrasion resistance (km)Life (cut)

Printing

Detection

Power supply (V)

Peak current (A)

Auto cutter

Service life

Operating temperature (ºC) Dimensions (W x D x H mm)Mass (g)


858 54

150Curved

By thermistorBy mechanical switchBy photo interrupter

3.14 to 3.46 / 4.75 to 5.2521.6 to 26.4

5.2 (26.4V / 288 dots)0.4 / 0.37 *1

100 million 100 *2

0 to 50

CAPG247

By mechanical switch

0.5Slide type

54 to 80 *2

Full cut / Partial cut (Leave center point)0.51030

1,000,000

80.5 x 65.0 x 22.2 *3

Approx.180

LTPG247

-

-------

-

79.5 x 43.0 x 17.4 *3

Approx.80

+0-1

Max printing speed: 150mm/secPlaten latch functionWindows® driver (XP / Vista) *32bit

OPOS driver (XP) *In use with IFG001-03SK/03UK

Linux driver

EFT/POSPOS/ECR

CAPG247 / LTPG247Thermal Printer Mechanism

*1 2-2 phase and W1-2 excitation method *2 Use recommended thermal papers *3 Excluding protrusion

*4 CG ROM: Japanese


Interface

CPU


Character type



PTG00P01CAPG247, LTPG247


18.43 +/-0.5%C-MOS LSI


Extended graphics character set,Other characters is availabe with CGs*4


22.0 x 16.0 x 3.15

Model

Model



Charactertype


IFG001-03SK

YesYesYesYesYesYes

Serial (RS-232C)

IFG001-03UK

YesYesYesYesYesYesUSB

PTG00P01CAPG247, LTPG247

Vp:21.6 to 26.4


75.0 x 75.0 x 16.0

Barcode

LTPG247

CAPG247(With auto cutter)

IFG001-03UK

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

16

Model

Printing

Detection

Power supply (V)

Peak current (A)

Service life



8

CurvedBy thermistor


4.75 to 5.2521.6 to 26.4

100 million 100 *1

0 to 50

432

58

54

86.2 x 54.0 x 25.8 *2

Approx.150

576

80

72

110.2 x 54.0 x 25.8 *2

Approx.175

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperaturePlaten position Out of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

+0-1

+0-1

Max printing speed: 220mm/secPlaten latch functionHeavy-duty: 100mil. pulse, 100kmAuto cutter option (Slide type) available

LTPF SeriesThermal Printer Mechanism

LTPF247F

220

5.4 (26.4V / 128 dots)0.46

LTPF247E

100

2.6 (26.4V / 144 dots)

0.55

LTPF347F

220

5.4 (26.4V / 128 dots)0.46

LTPF347E

100

2.6 (26.4V / 144 dots)0.55


Interface

Auto cutter

Thermal Printer

Cutting

Operatingvoltage (V)

Starting current (A)Life (cut) Dimensions (W x D x H mm)Mass (g)

Slide type

60 to 80 *4

0.6 (24V)1030

21.6 to 26.44.5 to 5.5

1.2 1,000,000 *5

MethodPaper width (mm)Paper thickness (µm)

Cutting type

Operating time (sec/cycle)maxCutting pitch (mm)minCut frequency (cut/min)maxMotorDetector (control switch)

CPU

Thermal printerPackage form

Operating voltage (V)

Operating frequency (MHz)ConfigurationCommunication interface

Character type



PTF00P01LTPF247F, LTPF347F

144pin QFP

Vp:21.6 to 26.4Vcc:4.5 to 5.5

27 +/- 0.5%

22.0 x 22.0 x 3.05


Extended graphics character set,Other characters is availabe with CGs*3 or external ROM


PTF20P01LTPF247E, LTPF347E

128pin QFP

Vp:21.6 to 26.4Vcc:4.75 to 5.25

18.43 +/- 0.5%

22.0 x 16.0 x 3.15

ModelModel

Model

*3 CG ROM: Japanese

*4 Use recommended thermal papers *5 Depending upon specified conditions.



Charactertype

Communication interface


IFF001-02B

YesNoYesYesYesNo

IFF001-02BK

YesYesYesYesYesYes

+0-1

ACUF224J

Partial cut(Leave center point)

ACUF224H

Full cut

ACUF324J

Partial cut(Leave center point)

ACUF324H

Full cut

LTPF247

58

80.0 x 64.0 x 19.0Approx.130

+0-1

LTPF347

80

102.0 x 64.0 x 19.0Approx.150

PTF00P01LTPF247F, LTPF347F

Vp:21.6 to 26.4, Vcc: 4.5 to 5.5

Parallel,Serial (C-MOS)

80.0 x 100.0 x 19.6

Winder unit

Thermal PrinterPaper width (mm) Paper thickness (µm)Outside diameter of paper roll (mm)maxInside diameter of paper roll (mm)minOperating Voltage (V)Speed (mm/s)maxLife (operating hours)Dimensions (W x D x H mm)Mass (g)

Model WU282LTPF247F

58

70 to 80φ83φ20

21.6 to 26.4220160

87.8 x 92.0 x 97.6Approx.136

+0-1



POS/ECR MedicalEquipmentE

KIOSKSystem


LTPF247(With auto cutter)

LTPF347

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

17

CAP9347

640

80 / 82.55

76 / 80

112.0 x 50.0 x 30.0 *2

Approx.290

By mechanical switch

1.2Slide type

57 to 155 *1

Full cut / Partial cut (Leave center point)21030

1,000,000

ModelMethod Number of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead temperatureOut of paperMark position Platen position Cutter position Operation voltage (Vdd)Operation voltage (Vp)HeadMotorCutterMethodPaper thickness (µm)Cutting typeOperating time (sec/cycle) maxCutting pitch (mm) minCut frequency (cut/min) maxPulse activation (pulse)Abrasion resistance (km)Life (cut)

Printing

Detection

Power supply (V)

Peak current (A)

Auto cutter

Service life

Operating temperature (ºC) Dimensions (W x D x H mm)Mass (g)


8

250Curved / Straight

By thermistorBy photo interrupterBy photo interrupterBy mechanical switch

4.75 to 5.2521.6 to 26.4

5.9 (26.4V / 128 dots)1.0

150 million 150 *1

-20 to 60


CAP9247

448

58 / 60

54 / 56

89.5 x 50.0 x 30.0 *2

Approx.240


InterfaceModelCPUThermal printerOperating voltage (V)Character matrix (H x W dots)

Charactertype


IF9001-03U

YesYesYesYesYesYesUSB

IF9001-03S

YesYesYesYesYesYes

Serial (RS-232C)

Custom CPUCAP9247, CAP9347, LTP9247, LTP9347

Vp:21.6 to 26.416 dots characters : 16 x 8, 16 x 16 24 dots characters : 24 x 12, 24 x 24

108.0 x 90.0 x 28.0

LTP9347

640

80 / 82.55

76 / 80

111.25 x 50.0 x 29.7 *2

Approx.180

-

-------

-

LTP9247

448

58 / 60 54 / 56

88.8 x 50.0 x 29.7 *2

Approx.150

+0-1

+0-1

+0-1

+0-1

+0-1

+0-1

+0-1

+0-1

Max printing speed: 250mm/secCompact 2", 3" heavy-duty mechanismSupport thick paper: up to 155µm *1 (Straight path model only)Operation temperature: -20˚C to 60˚CWindows® driver (XP / Vista) *32bit

OPOS driver (XP)Linux driver

MCSOWWOL

TicketPrinter

KIOSKSystem

Barcode

CAP9000 Series

LTP9000 Series


CAP9347

CAP9247

Thermal Printer

Loading Mechanism

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

18

LTP2342Model

+0-1

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathHead-up Platen position Out of paper Operation voltage (Vdd)Operation voltage (Vp)HeadMotorPulse activation (pulse)Abrasion resistance (km)

Printing

Detection

Power supply (V)

Peak current (A)

Service life



8 80

72

Straight / CurvedBy thermistor


4.75 to 5.2521.6 to 26.4

4.3 (26.4V / 288 dots)0.5

100 million 50 *1

0 to 50 106.4 x 61.4 x 27.0 *2

Approx.135

75

LTP2242

+0-1

432

60 5490

85.2 x 61.4 x 27.0 *2

Approx.115

LTP2442

+0-1

832

112104

138.2 x 61.4 x 27.0 *2

Approx.160



Interface

Auto cutter

Thermal printer

Cutting

Operatingvoltage (V)

Starting current (A)Life (cut) Dimensions (W x D x H mm)Mass (g)

ACU2324LTP2342Slide type

80 65 to 125 *4

Full cut / Partial cut (Leaving center point)0.51030

21.6 to 26.44.75 to 5.25

1.2300,000

100.0 x 66.5 x 17.0Approx.200

Method Paper width (mm)Paper thickness (µm)Cutting typeOperating time (sec/cycle)maxCutting pitch (mm)minCut frequency (cut/min)maxMotorDetector (control switch)

CPU


Character type



PT230P01LTP2242,LTP2342,LTP2442


18.43 +/- 0.5%C-MOS LSI

Parallel, Serial

Extended graphics character set,Other characters is available with CGs *3 or external RAM


22.0 x 16.0 x 3.1

ModelModel

Model

*3 CG ROM: Japanese, Korean

*4 Use recommend thermal papers



Charactertype


IF2303-01B

YesNoYesYesYesNo

IF2303-01BK

YesYesYesYesYesYes

+0-1

+0-1

+0-1

ACU2224LTP2242

60

79.0 x 66.5 x 16.5Approx.120

PT230P01LTP2242,LTP2342,LTP2442

Vp:21.6 to 26.4, Vcc:4.5 to 5.5


Parallel, Serial (C-MOS)90.0 x 100.0 x 22.0

Max printing speed (LTP2242) : 90mm/secStraight and curved path models availableLabel printingSupport thick paper: up to 135µm*1

(Straight path model only)

MSLS

MeasuringInstrument


KIOSKSystem

Label MedicalEquipment

ACU2424LTP2442

112

126.0 x 69.3 x 17.5Approx.260

Barcode

LTP2000 SeriesThermal Printer Mechanism

LTP2242

LTP2342

Thermal Printer

Loading Mechanism

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

19

MeasuringInstrument

PDA Barcode MedicalEquipment

ModelMethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxOutside diameter of paper roll (mm)maxCharacter matrix (HxW dots)Character dimensions (HxW mm)Number of columns

Printing

Type of Paper

Character type

Bar codePower supply (V)Communication interfaceInput bufferCommandCuttingOperating temperature (˚C)Service life (km)Dimensions (W x D x H mm)Mass (g)StandardOption

DPU-S245

3848

58 48100φ38

24 x 12, 24 x 24, 16 x 8, 16 x 163.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0

24, 12, 32, 16Roll paper, Label roll paper

-10 to 50

83 x 130 x 45 *3

Approx.280 *4

FCC, CE, VCCI


Extended graphics character set, Katakana character set, CP1252, Optional font, Downloaded character, User-defined character, JIS 1&2 level kanji

UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, CODE128, PDF417, QR Code, MaxiCode, Data MatrixLi-lon battery, Specified AC adapter

Bluetooth®*1, USB, IrDA (ver1.2), Serial4K bytes

ESC/P TM conformityTear bar

50 *2

AC adapter, Battery pack, Battery charger, AC cable, USB cable, Serial cable, Carring case

Item

Baud rate

Data bit

Parity bit

Stop bit

Control method

Specification

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

7bits, 8bits

Odd, Even, or None

1bit, 2bits

H/W BUSY, Xon/Xoff

Serial interface specification

USB interface specificationUSB printerclass 2.0 conformity

Bluetooth® interface specificationBased on Bluetooth® Ver.2.0 + EDR

Infrared interface specificationBased on IrDA Ver. 1.2Based on BHT Ir protocol

*1 Only Bluetooth® model *2 Use recommended thermal papers *3 Excluding protrusion *4 including battery, excluding roll paper

Max printing speed: 100mm/sec (DPU-S245) 90mm/sec (DPU-S445)Interface: Bluetooth®, USB, IrDA (ver1.2) and SerialCompact and light-weightEasy paper operationWindows® drivers (XP / Vista / 7) *32bit

SDK (Communication library)Software library (Windows® CE 5.0, Windows® Mobile 5.0 / 6.0)

+0-1

+0-1

DPU-S445

8328

112 10490φ50

24 x 12, 24 x 4, 16 x 8, 16 x 163.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0

52, 26, 69, 34Roll paper, Label roll paper, Cut sheet paper

0 to 50

145.0 x 135.0 x 58.0 *3

Approx.490 *4

FCC, CE, VCCI, CCC

DPU-S245/445Mobile Printer

ELabel

Cut sheet paper

DPU-S245 DPU-S445

DPU-S445

Easy paper operation

DPU-S245

DPU-S445

Thermal Printer

Mobile Printer

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

20

Receipt printing atKIOSK stores or stands

Receipt printing foron-site card payment

Label printing forparcel service

4” wide printing for sales force automation

Printing bills forutility service

Barcode label printing atwarehouse

Applications with 2” mobile printer DPU-S245 series

Applications with 4” mobile printer DPU-S445 series

With best in class portability, ease-of-use design, DPU-S445 supports outside salesperson.It can fit comfortably your briefcase!

For mail-order or food delivery business, portability and ease-of use are keys of on-site receipt printing. DPU-S245 enhances your mobile POS business.

For field work, DPU-S445 performs smart in rugged mobile environments.

DPU-S245 supports label printing as well as standard receipt printing.It powerfully supports mobile labeling for parcel service or operations at warehouse.

With battery operation, DPU-S445 works on the cart and prints barcode anywhere in warehouse.

With small footprint, very lightweight designs, DPU-S245 fits any tiny space at KIOSK stores or outdoor stands.And high speed printing minimizes waiting time in a queue.

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

21

MPU-L465-02Standard model

No

YesYesNo

Approx.760 *2

Model

Method Number of dots/lineResolution (dpi)Paper width (mm) Printing width (mm)Speed (mm/sec)max Outside diameter of paper roll (mm)maxInside diameter of paper roll (mm)character matrix (H × W dots)character size (H × W mm)

USB Ver.1.1RS-232CBluetooth® SPP

Printing Type of paper

Character type Bar code

Label peeler functionPower supply(V)

Communicationinterface

Input bufferCommandOperating temperature (˚C)Service life (Km)Dimensions (W × D × H mm) Mass (g)StandardOption

*1 Excluding protrusion, including rubber cover *2 Excluding strap, roll paper, battery and belt clip *3 Excluding strap and roll paper, including battery and belt clip

MPU-L465-16 Bluetooth model

No

YesYesYes

Approx.870 *3

MPU-L465-17Peeler model

Yes

YesYesYes

Approx.900 *3


70 to 115108.4

85φ58

φ8.0, φ12.0, φ25.424×12, 24×24, 36×18, 36×36

2.03 x 1.02, 2.03 x 2.03, 3.05 x 1.52, 3.05 x 3.05Roll paper, Label roll paper

Extended graphics character, Katakana character, Optional font ,Downloaded character, User-defined character, JIS1&2 level kanji,

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CODABAR, CODE93, CODE128/EAN128, PDF417, QR Code, MaxiCode, Data Matrix

Li-ion battery, Specified AC adapter

4k bytesESC/POSTM conformity

-15 to 5050

168 × 155 × 87 *1

FCC, VCCIBattery pack, AC adapter, Battery charger, AC cable, Belt clip, Strap,Serial cable, USB cable

Support label peelerMPU-L465-17

(Peeler model)

MPU-L465-16(Bluetooth® model)

MPU-L465-02(Standard model)

PDA

Max printing speed: 85mm/secHigh resolution: 300dpiAdjustable paper width: 70 to 115mmOperating temperature: -15˚C to 50˚C Interface: Bluetooth®, USB, SerialEasy paper operationWindows® driver (XP) *32bit

MHAAOIEWW

MPU-L465 SeriesMobile Printer

Barcode Label

Thermal Printer

Mobile Printer

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

22

MPU-L465-02Standard model

No

YesYesNo

Approx.760 *2

Model

Method Number of dots/lineResolution (dpi)Paper width (mm) Printing width (mm)Speed (mm/sec)max Outside diameter of paper roll (mm)maxInside diameter of paper roll (mm)character matrix (H × W dots)character size (H × W mm)

USB Ver.1.1RS-232CBluetooth® SPP

Printing Type of paper

Character type Bar code

Label peeler functionPower supply(V)

Communicationinterface

Input bufferCommandOperating temperature (˚C)Service life (Km)Dimensions (W × D × H mm) Mass (g)StandardOption

*1 Excluding protrusion, including rubber cover *2 Excluding strap, roll paper, battery and belt clip *3 Excluding strap and roll paper, including battery and belt clip

MPU-L465-16 Bluetooth model

No

YesYesYes

Approx.870 *3

MPU-L465-17Peeler model

Yes

YesYesYes

Approx.900 *3


70 to 115108.4

85φ58

φ8.0, φ12.0, φ25.424×12, 24×24, 36×18, 36×36

2.03 x 1.02, 2.03 x 2.03, 3.05 x 1.52, 3.05 x 3.05Roll paper, Label roll paper

Extended graphics character, Katakana character, Optional font ,Downloaded character, User-defined character, JIS1&2 level kanji,

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CODABAR, CODE93, CODE128/EAN128, PDF417, QR Code, MaxiCode, Data Matrix

Li-ion battery, Specified AC adapter

4k bytesESC/POSTM conformity

-15 to 5050

168 × 155 × 87 *1

FCC, VCCIBattery pack, AC adapter, Battery charger, AC cable, Belt clip, Strap,Serial cable, USB cable

Support label peelerMPU-L465-17

(Peeler model)

MPU-L465-16(Bluetooth® model)

MPU-L465-02(Standard model)

PDA

Max printing speed: 85mm/secHigh resolution: 300dpiAdjustable paper width: 70 to 115mmOperating temperature: -15˚C to 50˚C Interface: Bluetooth®, USB, SerialEasy paper operationWindows® driver (XP) *32bit

MHAAOIEWW

MPU-L465 SeriesMobile Printer

Barcode Label

Anytime, Anywhere!MPU-L465 is a right tool for a variety of mobile applications.

Standard model :MPU-L465-02For manufacturing line...

Bluetooth model:MPU-L465-16

For law enforcement...

For logistics...Peeler model: :MPU-L465-17

The automatic labelpeeling capabilityprovides ease-of-useand high productivityat one-site printing.

Template layout / download software

TemplateAssistUTILITY software

sii_dipsw

Convenient software tools availablefor assisting application development.

Battery pack, AC adapter, Battery charger, AC cable,Belt clip, Strap,Serial cable, USB cable

Software toolsOption

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

23

*1 Use recommented thermal papers. *2 Excluding protrusion

Max printing speed : 200mm/secHigh Reliability : 100mil. pulse, 100km, 1.5mil. cutsMounting flexibility : Countertop, vertical and wall mounting optionsWindows® driver (XP / Vista / 7) *32bit

Driver and utility softwareOPOS driver (XP / Vista)

MHMWWDO

RP-B10POS Printer

MeasuringInstrument


KIOSKSystem

ModelMethodNumber of dots/lineResolution (dpi)Paper width (mm)Printing width (mm)Speed (mm/sec)maxOutside diameter of paper roll (mm)maxInside diameter of paper roll (mm)Character matrix (H x W dots)Character size (H x W mm)

MethodsCutting type

Abrasion resistance (km)Life (cut)

Printing

Type of paperCharacter typeBar code Power supply (V)Communication interfaceInput bufferCommand

Cutting

Operating Temperature (˚C)

Service life

Dimensions (W × D × H mm)Mass (g)StandardOptionCash drawerBody Color

RP-B10

Back view Easy paper operation


203 (8dots/mm)58+

-01 /80+

-01

54/72200φ83φ12

24 x 12, 24 x 24, 16 x 8, 1 6 x 163.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0

Roll paperCode page: 11pages, Downloaded character, User-defined character, JIS 1&2 level kanji

UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, Code93, CODE128, PDF417, QR CodeSpecified AC adapter, External power (DC24V±5%)

Serial (RS-232C), USB selected model10k bytes

ESC/POSTM conformitySlide type

Partial cut (Leave center point )5 to 45100*1

1,500,000150.0×185.0×139.5*2

Approx. 1300FCC, CE, VCCI

AC adapter, AC cable, Wall mounting kit, Vertically mounting kit 2 drivers (24V / 1A)

2 models: White / Black

Convenient software tools available for assisting application development.

Software tools

Driver and utility softwareSDK: Status API, Devmode API (For Win32 API*3 / .net API*4)*3 *4 The Windows® API, informally WinAPI, is Microsoft's core set of application programming interfaces (APIs) available in the Microsoft Windows® operating systems.

The Win32 API is for Windows® operating system on 32bits processor.

Utility soft(Build on the Windows® driver)

Memory SW setting, LOG management,USB serial ID setting, NV image registration, Code page registration

For printing receiptat stores or restaurants...

For printing slipat public facilities...

For printing numbered ticketto patient waitingat hospitals...

Receipt, slip, ticket and more.RP-B10 is ideal printer for many of applications.

150

139.

5

185

139.

5

(Top) (Front) (Side)

Product specificationProduct specification

Retail & Hospitality

Service

Medical

OptionsExternal dimensions (mm)

RP-B10

Thermal Printer

POS Printer

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

24

*1 Use recommented thermal papers. *2 Excluding protrusion

Max printing speed : 200mm/secHigh Reliability : 100mil. pulse, 100km, 1.5mil. cutsMounting flexibility : Countertop, vertical and wall mounting optionsWindows® driver (XP / Vista / 7) *32bit

Driver and utility softwareOPOS driver (XP / Vista)

MHMWWDO

RP-B10POS Printer

MeasuringInstrument


KIOSKSystem

ModelMethodNumber of dots/lineResolution (dpi)Paper width (mm)Printing width (mm)Speed (mm/sec)maxOutside diameter of paper roll (mm)maxInside diameter of paper roll (mm)Character matrix (H x W dots)Character size (H x W mm)

MethodsCutting type

Abrasion resistance (km)Life (cut)

Printing

Type of paperCharacter typeBar code Power supply (V)Communication interfaceInput bufferCommand

Cutting

Operating Temperature (˚C)

Service life

Dimensions (W × D × H mm)Mass (g)StandardOptionCash drawerBody Color

RP-B10

Back view Easy paper operation


203 (8dots/mm)58+

-01 /80+

-01

54/72200φ83φ12

24 x 12, 24 x 24, 16 x 8, 1 6 x 163.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0

Roll paperCode page: 11pages, Downloaded character, User-defined character, JIS 1&2 level kanji

UPC-A/E, JAN(EAN)8/13, ITF, CODE39, CODABAR, Code93, CODE128, PDF417, QR CodeSpecified AC adapter, External power (DC24V±5%)

Serial (RS-232C), USB selected model10k bytes


Partial cut (Leave center point )5 to 45100*1

1,500,000150.0×185.0×139.5*2

Approx. 1300FCC, CE, VCCI

AC adapter, AC cable, Wall mounting kit, Vertically mounting kit 2 drivers (24V / 1A)

2 models: White / Black

Convenient software tools available for assisting application development.

Software tools

Driver and utility softwareSDK: Status API, Devmode API (For Win32 API*3 / .net API*4)*3 *4 The Windows® API, informally WinAPI, is Microsoft's core set of application programming interfaces (APIs) available in the Microsoft Windows® operating systems.

The Win32 API is for Windows® operating system on 32bits processor.

Utility soft(Build on the Windows® driver)

Memory SW setting, LOG management,USB serial ID setting, NV image registration, Code page registration

For printing receiptat stores or restaurants...

For printing slipat public facilities...

For printing numbered ticketto patient waitingat hospitals...

Receipt, slip, ticket and more.RP-B10 is ideal printer for many of applications.

150

139.

5

185

139.

5

(Top) (Front) (Side)

Product specificationProduct specification

Retail & Hospitality

Service

Medical

OptionsExternal dimensions (mm)

Wall mounting kit

Verticallymounting kit

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Stan

dal

on

ePr

inte

r U

nit

Stan

dal

on

ePr

inte

r U

nit

Sub

-ass

emb

led

Prin

ter

Un

itSe

rial

Pri

nte

rO

ther

Mo

del

sLi

ne

up

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

25

ModelMethodNumber of dots/line (H x W)Paper width (mm)Printing width (mm)Speed (character/sec)maxCharacter matrix (H x W dots)Character size (H x W mm)Number of columns

Printing

Character typePower supplyBatteryCommunication interfaceInput buffer CommandCutting Operating temperature (˚C)Service life (line)Dimensions (W x D x Hmm)Mass (g)StanderdOption

+0-1

DPU-414-40BThermal serial dot printing

9 x 32011289.652.59 x 7

2.5 x 1.9, 2.5 x 0.9 (Condensed)40, 80 (Condensed)

Extended graphics character set, Alphanumeric, International characters, Katakana character setOption: Specified AC adapter, Ni-MH battery

Without (option)Parallel (36pins Amphenol), Serial (9pins D-SUB)

28K bytesESC/P™ conformity

Tear bar0 to 40

500,000 *1

160.0 x 170.0 x 66.5 (printer unit only)*2

Approx.580 (without Battery)FCC, CE, VCCI, CCCAC adapter, Battery


MeasuringInstrument

MedicalEquipment

Max printing speed: 52.5 character/secAvailable international characterInterface: Serial and parallel

MAAI

Item

Baud rate

Data bit

Parity bit

Stop bit

Control method

Specification

75, 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps

7bits, 8bits

Odd, Even, or None

1bit

H/W BUSY, Xon/Xoff

Serial interface specificationItem

Synchronization

Handshaking

Signal level

Specification

Synchronized with STROBE signal

Synchronized with ACK and BUSY signal

TTL level

Parallel interface specification

DPU-414Standalone Printer Unit

DPU-414

Thermal Printer

Standalone Printer Unit

LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

26

MeasuringInstrument

MedicalEquipment

Max printing speed: 100mm/sec (DPU-D2) 80mm/sec (DPU-D3)Small and compact designPanel-mount typeEasy paper operationWindows® driver (XP / Vista) *32bit

DPU-D2 / D3Panel-Mount Printer Unit

Item

Baud rate *3

Data bit

Parity bit *3

Stop bit

Control method *3

Specification

9600, 19200, 38400, 115200

8 bits

Odd, Even or None

1 bit

BUSY, Xon/Xoff


Synchronization

Handshaking

Signal level

Specification



TTL level

Model

+0-1

+0-1

DPU-D3-00A/01A

576

8072

80 (8.5V)

24, 48, 36, 72

102.0 x 68.8 x 85.5 *2

Approx.210


8

24 x 24, 24 x 12, 16 x 16, 16 x 83.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0

Extended graphicss character, Katakana character set, CP1252, Optional font, Downloaded character, User-defined character, JIS 1 & 2 level kanji

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CADABAR, CODE93, CODE128, PDF417, QR Code, MaxiCode, Data MatrixDriving voltage (5.0 to 9.0)

00A : Serial/USB 01A : Parallel4,096 bytes

ESC/POS™ conformityTear bar-10 to 50

50 *1

DPU-D2-00A/01A

384

58 48

100 (8.5V)

16, 32, 24, 48

80.0 x 68.8 x 85.5 *2

Approx.180

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec) maxCharacter matrix (H x W dots)Character size (H x W mm)Number of columns

Printing

Character type

Bar codePower supply (V)Communication interfaceInput buffer CommandCutting Operating Temperature (˚C) Service life (km)Dimensions (W x D x H mm)Mass (g)



Parallel interface specification

*3 Select by utility soft ware

DPU-D2

DPU-D3

Thermal Printer

Panel-Mount Printer UnitLowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p PB-01-1

27

ModelPresenter

APU-9000-C

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathCharacter matrix (H x W dots)Character dimensions (H x W mm)

MethodCutting typePulse activation (pulse)Abrasion resistance (km)Life (cut)

Printing

Character type

Bar code

Power supply (V)Communication interfaceInput bufferCommand

Cutting

Service life




8

250Straight

24 x 24, 24 x 12, 16 x 16, 16 x 83.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0

Extended graphics character set, Katakana character set, Optional font,Downloaded character, User-defined character, JIS 1&2 level kanji

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CODABAR, CODE93, CODE128, EAN128PDF417, Data Matrix, Maxi Code, QR Code

21.6 to 26.4Serial (RS-232C), USB, Selected Model

2048 bytes ESC/POS™ conformity

Slide typePartial cut / Full cut

150million150*1

1,000,000-20 to 60

Sub-assembled Printer Unit

Max.printing speed: 250mm/secRoll paper capacity: up to φ152.4mm (6inch)Interface: Serial, USB modelOperating temperature : -20˚C to 60˚CWindows® driver (XP / Vista) *32bit

SDK (Communication library)OPOS driver (XP)Linux driver

SOL

APU-9247-C01

448

58+-01 / 60+

-01

54 / 56

Approx. 1500

APU-9347-C01

640

80+-01 / 82.55+

-01

76 / 80

Approx. 1600

SeriesTicketPrinter

KIOSKSystem

Barcode

APU-9247-C02

448

58+-01 / 60+

-01

54 / 56

Approx. 1600

APU-9347-C02

640

80+-01 / 82.55+

-01

76 / 80

Approx. 1700 136.0 x 165.0 x 135.0 *2 136.0 x 216.2 x 135.0 *2

No Yes

Item

Baud rate

Data bit

Parity bit

Stop bit

Control method

Specification

57600,115200 bps

8bits

Odd, Even, or None

1bit

H/W BUSY, Xon/Xoff



Power connector conversion board

Supported AC adapterDimensions (W x D x H mm)Cable length (mm)

PB-01-1PW-A2421-W1 *3

35.0 x 55.0 x 16.6 *4

360

Model

*3 Use under specific environment and printer setting only. *4 Excluding protrusions.

APU-9247-C01

APU-9347-C02 (with Presenter)

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up PB-01-1

28

ModelMethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathCharacter matrix (H x W dots)Character dimensions (H x W mm)


Printing

Character type

Bar code


Cutting

Service life



APU-G247Thermal line dot printing

4328

5854

150Curved

24 x 24, 24 x 12, 16 x 16, 16 x 83.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0

Extended graphics character set, Katakana character set, Optional font, Downloaded character, User-defined character, JIS 1&2 level kanji

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39,CODABAR, CODE93, CODE128, PDF417, QR Code

21.6 to 26.4Serial (RS-232C) or USB

1023 bytesSII standardSlide type

Partial cut / Full cut100million

100*1

1,000,0000 to 50

98.4 x 95.5 x 148.0*2

Approx.525

+0-1

KIOSKSystem

Barcode Gas-Pos

Max.printing speed: 150mm/secRoll paper capacity: up to φ83mmEasy paper operationInterface: Serial or USB modelWindows® driver (XP / Vista) *32bit

OPOS driver (XP)

Item

Baud rate

Data bit

Parity bit

Stop bit

Control method

Specification

115200 bps

8bits

None

1bit

H/W BUSY, Xon/Xoff



APU-G247Sub-assembled Printer Unit

Power connector conversion board

Supported AC adapterDimensions (W x D x H mm)Cable length (mm)

PB-01-1PW-A2421-W1 *3

35.0 x 55.0 x 16.6 *4

360

Model

*3 Use under specific environment and printer setting only. *4 Excluding protrusions.

APU-G247

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

29

Model

APU-2242-A02U

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathCharacter matrix (H x W dots)Character dimensions (H x W mm)


Printing

Character type

Bar code


Cutting

Service life



APU-2242-A02UThermal line dot printing

4328

605490

Straight24 x 24, 24 x 12, 16 x 16, 16 x 8

3.0 x 3.0, 3.0 x 1.5, 2.0 x 2.0, 2.0 x 1.0

Extended graphics character set, Katakana character set, Optional font, Downloaded character, JIS 1&2 level kanji

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CODABAR, CODE93, CODE128PDF417, Data Matrix, Maxi Code, QR Code

21.6 to 26.4USB

256 bytesSII standardSlide typeFull cut

100million 50 *1

300,0000 to 50

145.0 x 203.0 x 112.0 *2

Approx.1400


Max.printing speed: 90mm/secRoll paper capacity: up to φ87mmInterface: USB modelCompact design with presenterWindows® driver (XP / Vista) *32bit

SDK (Communication library)

MRICWWS

+0-1

TicketPrinter

KIOSKSystem

Barcode


APU-2242-A02U

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

30

Printing

Character typeBar codePower supply (V)Communication interfaceInput bufferCommand

Cutting

Service life

Life of auto cutter (number of cutting) Operating temperature (˚C)Dimensions (W x D x H mm)Mass (g)StandardOption


8

Straight24 x 12, 24 x 24, 1 6 x 8, 16 x16

3.0 x 1.5, 3.0 x 3.0, 2.0 x 1.0, 2.0 x 2.0Extended graphics character set, Katakana character set, Optional font, Downloaded character, User-defined character, JIS 1&2 level kanji

UPC-A/E, JAN (EAN) 8/13, ITF, CODE39, CODABAR, CODE93, CODE128, PDF417Option : Specified AC adapter

Serial (RS-232C), Parallel (IEEE1284 Nibble mode), USB selected model7k bytes


Full cut / Partial cut (Leave center point)100 million

50 *1

300,0000 to 40

FCC, CE, VCCIAC adapter, AC cable

KPU-S347*-11H KPU-S347*-11V

132.0 x 225.0 x 140.0 *2 132.0 x 235.0 x 140.0 *2

640

58 , 60 , 66 , 76.2 , 80 , 82.55 54 to 80

200

Approx.3000

+0-1

+0-1

+0-1

+0-1

+0-1

+0-1

MethodNumber of dots/lineResolution (dots/mm)Paper width (mm)Printing width (mm)Speed (mm/sec)maxPaper pathCharacter matrix example (H x W dots)Character size (H x W mm)

MethodCutting typePulse activation (pulse)Abrasion resistance (km)


Baud rate

Data bit

Parity bit

Stop bit

Control method

Specification

4800, 9600, 19200, 38400 bps

7bits, 8bits

Odd, Even, or None

1bit, 2bits

H/W BUSY, Xon/Xoff

Model


Parallel interface specificationItem

Synchronization

Handshaking

Signal level

Specification



TTL level


TicketPrinter

KIOSKSystem

Barcode

Max printing speed: 200mm/secRoll paper capacity: up to φ228mmPresenter with automatic retracting functionAvailable serial, parallel and USB modelAvailable vertical and horizontal typeSupport thick paper: up to 155µm*1

Windows® driver (XP / Vista) *32bit

Linux driver

KPU SeriesSub-assembled Printer Unit

KPU-S347*-11V(Vertical)

KPU-S347*-11H (Horizontal)

*=S, P, U (S:Serial P:Parallel U:USB)

Thermal Printer


LowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

31

Model

+0-1

Printing

DetectionPower supply (V)Peak current (A)Service life (Lines)Operating temperature (˚C)Dimensions (W x D x H mm)Mass (g)

Thermal serial dot printing80

66.70.5

Curved7 x 5

2.4 x 1.240

Left to rightSynchronized with the tachogenerator

Mechanical switch4.0 to 6.0

3.2 (5V on)500,000 *1

0 to 5091.5 x 35.5 x 20.0*2

Approx.50


*Download character function is enable when EEPROM is connected.

3826.41.2

2.4 x 1.216

48.0 x 31.0 x 13.8*2

Approx.35

+0-180

67.20.5

2.4 x 1.240

91.5 x 35.5 x 20.0 *2

Approx.50

+0-1

44.70.9

2.4 x 1.718

+0-1

+0-1

Graphic

460.9

2.4 x 1.424

2.80

45.91.0

2.4 x 1.620

460.9

2.4 x 1.424

Character

58

3.82

70.0 x 34.0 x 14.4 *2

Approx.40

58

70.0 x 34.0 x 14.4 *2

Approx.40

TypeMethodPaper width (mm)Printing width (mm)Speed (line/sec)max Paper path Character matrix (H x W dots)Character size (H x W mm)Number of columnsDirectionTimingLine spacing (mm)Character spacing (dot)Home position

Interface

CPUThermal printerOperating voltage (V)Character matrix (H x W dots)

Character type

Communication interfaceMode

Dimentions (W x D x H mm)

Note

PTM01F01MTP102, MTP201, MTP401

Vp: 4.0 to 6.0, Vcc:4.5 to 5.57 x 5, 8 x 5

YesYesNoNo

Parallel, Serial (C-MOS)Character mode, Graphic mode

Model IFM001-01B-C

71.5 x 59.0 x 11.520.0 x 59.0 x 11.5

Including connector boad

IFM001-01B

71.5 x 59.0 x 11.5

-

CPU

MTP102, MTP201, MTP401

Vp:4.0 to 6.0, Vcc:4.5 to 5.54.91 +/- 0.5%


Extended graphics character set, Alphanumeric, Downloaded character, International characters, Special characters7 x 5, 7 x 6(character type), 8 x 6(Graphic type)

PTM01F01

64pin flat package

17.2 x 17.2 x 2.7

PTM01P01

64pin DIP

57.6 x 17.0 x 7.62

ModelThermal printerPackage formOperating voltage (V)Operating frequency (MHz)ConfigurationCommunication interfaceCharacter typeCharacter matrix(H x W dots)Dimensions (W x D x H mm)

Extended graphics character setKatakana character setDownloaded characterJIS 1&2 level kanji

Extremely compact and light-weightHigh reliabilityShuttle head type

EHS

MeasuringInstrument

PortablePrinter

MedicalEquipment

MTP SeriesSerial Printer

MTP102-16B MTP201-G128MTP201-20B MTP201-24B MTP401-40B MTP201-G166 MTP401-G280

MTP401

MTP102

MTP201

Thermal Printer

Serial PrinterLowVoltage

24V

mobile

POS


Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

32

CAPC Series / LTPC Series

Max printing speed: 65mm/secEasy paper operationLineup of head resolution: 6dots/mm and 8dots/mm

MeasuringInstrument

POS/ECR

LTPH245

Max printing speed: 62.5mm/secEasy paper operationPlaten latch functionOperating temperature: -30˚C to 70˚COO

LTP1245

Max printing speed: 62.5mm/secCompact and light-weightPaper feed knob model availableStraight and curved path models availableOperating temperature: -30˚C to 70˚C

CC

SSOO



Thermal Printer Mechanism LowVoltage

LowVoltage

LowVoltage


PortablePrinter



PortablePrinter


PortablePrinter

MedicalEquipment

LTP3445

Paper width of 112mmMax printing speed (450 dotlines/sec = 56.25mm/sec) when operating on 8.5V.Support two-ply thermal and label paper.Automatic paper loading.SSAA

STP series

Compact and light-weightHigh-quality and high reliabilityIndividual motors for moving head and feeding paper.Quiet printing by stepping motor.

CC

IQQ



LowVoltage

LowVoltage


MedicalEquipment

PDA


MedicalEquipment

PDA


MedicalEquipmentE

PortablePrinter

PDA


MedicalEquipment

PDAE

Amusement

CAPC245

LTP1245

LTPH245

LTP3445

STP211-144 STP411-320

LTPC245

Thermal Printer

Other Models Lineup

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

pLo

w V

oltag

e24V

olt

Mo

bile Prin

terPO

S Printer

Panel-M

ou

nt

Printer U

nit

Stand

alon

ePrin

ter Un

itSu

b-assem

bled

Printer U

nit

Serial Printer

Oth

er Mo

dels

Line u

p

33

DPU-E247

Max printing speed: 90mm/secFor journal printing, recordingBuilt-in auto-winder unitAvailable serial and parallel model

MeasuringInstrument


F

AA

Standalone Printer Unit24V

APU-F247

Max printing speed: 100mm/secEasy paper operationRoll paper capacity: φ83mm maxInterface: Serial, parallel and USBWindows® driver (XP) *32bit

IWW

Sub-assembled Printer Unit24V

KIOSKSystem

Barcode

24V

KIOSKSystem

Barcode

MeasuringInstrument

LowVoltage

MedicalEquipment

DPU-30 / DPU-12Panel-Mount Printer Unit

MeasuringInstrument

PortablePrinter

KIOSKSystem

MedicalEquipment

SAM-1245LowVoltage

Sub-assembled printer Unit

Max printing speed: 50mm/sec (DPU-30), 60mm/sec (DPU-12)Easy paper operation (DPU-30), Loading type (DPU-12)Available auto cutter model and tear-bar model (DPU-12)Windows® driver (XP) *32bit (DPU-30)

Max printing speed: 60mm/secCompact and light-weightAvailable built-in auto cutter model

APU-9347-B02Sub-assembled Printer Unit

24V

TicketPrinter

KIOSKSystem

Barcode

Max printing speed: 200mm/secRoll paper capacity: up to φ254mm (10inch)Interface: Serial or USB modelWindows® driver (XP / Vista) *32bit


DPU-30DPU-12

SAM-1245SAM-1245 (with autocutter model)

APU-9347-B02

APU-F247

DPU-E247

Thermal Printer

Other Models Lineup

Low

Vo

ltag

e24

Vo

ltM

ob

ile P

rin

ter

POS

Prin

ter

Pan

el-M

ou

nt

Prin

ter

Un

itSt

and

alo

ne

Prin

ter

Un

itSu

b-a

ssem

ble

dPr

inte

r U

nit

Seri

al P

rin

ter

Oth

er M

od

els

Lin

e u

p

Low

Vo

ltage

24Vo

ltM

ob

ile Printer

POS Prin

terPan

el-Mo

un

tPrin

ter Un

itStan

dalo

ne

Printer U

nit

Sub

-assemb

ledPrin

ter Un

itSerial Prin

terO

ther M

od

elsLin

e up

34

DPU-E247

Max printing speed: 90mm/secFor journal printing, recordingBuilt-in auto-winder unitAvailable serial and parallel model

MeasuringInstrument


F

AA

Standalone Printer Unit24V

APU-F247

Max printing speed: 100mm/secEasy paper operationRoll paper capacity: φ83mm maxInterface: Serial, parallel and USBWindows® driver (XP) *32bit

IWW

Sub-assembled Printer Unit24V

KIOSKSystem

Barcode

24V

KIOSKSystem

Barcode

MeasuringInstrument

LowVoltage

MedicalEquipment

DPU-30 / DPU-12Panel-Mount Printer Unit

MeasuringInstrument

PortablePrinter

KIOSKSystem

MedicalEquipment

SAM-1245LowVoltage

Sub-assembled printer Unit

Max printing speed: 50mm/sec (DPU-30), 60mm/sec (DPU-12)Easy paper operation (DPU-30), Loading type (DPU-12)Available auto cutter model and tear-bar model (DPU-12)Windows® driver (XP) *32bit (DPU-30)

Max printing speed: 60mm/secCompact and light-weightAvailable built-in auto cutter model

APU-9347-B02Sub-assembled Printer Unit

24V

TicketPrinter

KIOSKSystem

Barcode

Max printing speed: 200mm/secRoll paper capacity: up to φ254mm (10inch)Interface: Serial or USB modelWindows® driver (XP / Vista) *32bit


Seiko Instruments Inc. recommends the following paper to best print.

Printer

CAPD245, LTPD245, LTPU245, LTPJ245

LTPA245, LTPC245, CAPC245, LTPH245

CAPD345, LTPD345, LTPV345

LTPV445

CAPD247, LTPD247, LTPG247, CAPG247, LTPF247

CAPD347, LTPD347, LTPF347

LTP2242

LTP2342

LTP2442

DPU-S245

DPU-S445

RP-B10

MPU-L465

DPU-3445

DPU-D2

DPU-D3

DPU-12

DPU-30

DPU-411, DPU-412, DPU-414

DPU-H245

DPU-E247

APU-G247

APU-F247

SAM-1245

MTP102

MTP201

MTP401

STP211

STP312

STP411

Thermal paper

TP-322L

TP-V341L

TP-341L-1

TP-211C-1

TP-312C-1

TP-521C

TP-252C

TP-312C-1

TP-451C-1

TP-S245L-1

TP-341L-1

TP-E23C-1

TP-B10CH

TP-L465CXH

TP-L465CAH

TL-L465NS (Label)

TL-L465NP (Label)

TL-L465KS (Label)

TP-341L-1

TP-343L-3 (High proof paper)

TS-341-145 (Thick paper 145μm)

TP-211-C1

TP-312-C1

TP-201C-1

TP-211C-1

TP-411L-3

TP-411L-4

TP-H241L

TP-E23C-1

TP-E23C-1

TP-E23C-1

TP-322L

TP-102C-4

TP-251L

TP-202L-4

TP-312C-1

TP-401L-4

TP-211C-1

TP-211C-3

TP-312C-1

TP-312C-3

TP-451C-1

TP-451C-3

Paper width(mm)

58

80

112

58

80

60

60

80

112

58

112

58

80

112

112

112

58

80

58

58

112

112

58

58

58

58

58

38

58

58

80

80

58

58

80

80

112

112

External diameter(mm)

30

48

48

48

48

48

50

48

48

38

48

80

80

48

48

-

48

48

38

48

48

48

25

80

80

80

30

28

48

25

48

40

48

48

48

48

48

48

Internal diameter(mm)

9

9

9

12

12

12

12

12

12

9

9

12

12

9

9

-

12

12

9

12

9

9

9

12

12

12

9

11.2

9

9

12

9

12

12

12

12

12

12

Length(m)

(9)

(28)

(28)

(25)

(25)

(25)

(28)

(25)

(25)

(19)

(28)

(65)

(65)

(28)

(28)

158

(25)

(25)

(18)

(25)

(28)

(28)

(7)

(65)

(65)

(65)

(9)

(8)

(28)

(7)

(25)

(20)

(25)

(25)

(25)

(25)

(25)

(25)

Roll/Box

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

500 (Sheet)

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

10

Core

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

Specification

*Please contact us

Thermal Printer

Recommended thermal paper

Printed with Vegetable oil ink. This catalog is made from recycled paper.

Specifications are subject to change without notice.

ESC/POS and ESC/P are registered trademarks of SEIKO EPSON Corporation.

Windows is the registered trademark of Microsoft Corporation (USA).

Linux is a registered trademark of Linus Torvalds in the United States and / or other countries.

Company and product names are trademarks or registered trademarks of their respective companies.

We have completed making all of our printers compliant with the RoHS directive. Printed in Mar.2011

Homepage http://www.sii-ps.comSeiko Instruments Inc.Print System Div.8, Nakase 1-chome, Mihama-kuChiba-shi, Chiba 261-8507, JapanTelephone:+81-43-211-1106 　Facsimile:+81-43-211-8037Seiko Instruments USA Inc.2990 Lomita Blvd., Torrance, CA 90505, USA.Telephone:+1-310-517-7778 Facsimile:+1-310-517-8154

Seiko Instruments GmbHSiemensstrasse 9 D-63263 Neu-Isenburg, GermanyTelephone:+49-6102-297-0 Facsimile:+49-6102-297-222E-mail : [email protected]

Seiko Instruments (H.K.) Ltd.4-5 / F, Wyler Center 2, 200 Tai Lin Pai Road, Kwai Chung,N.T., Kowloon, Hong KongTelephone:+852-2494-5160 Facsimile:+852-2424-0901

Seiko Instruments Taiwan Inc. 6F, No.236,Sec.2,Jianguo N.Rd.,Taipei 104,Taiwan,R.O.C.Telephone:+886-2-2516-8518 Facsimile:+886-2-2516-1186

All products shown on this document are complied with requirements by ISO9001 and manufactured under quality management system certified by Bureau Veritas Japan.

1-1103-1200/MP/MS Printed in Japan

!

!

!

!

!

!




http://www.sii-ps.com


SAFETY PRECAUTIONS

1. This catalog provides a summary of product specifications. Before using each product, please thoroughly read the technical manual, user's manual, and other manuals which have been prepared by us.

2. The products listed in this catalog are not allowed to be used as part of any life-support system or any other equipment or system which requires extremely high reliability, without our permission in writing.

3. When using each product, thoroughly understand the specifications of the product, observe the descriptions and markings for prevention and avoidance of danger, on your products and in the documents such as the manual, and advise and guide your customers (users).

1. Because of our continuous research for improvements, the contents in this catalog may be changed without prior notice.

2. Since the photo of each product is printed, the color of the photo may be different from that of the real product. Before use, please check the actual color of the product.

3. Concerning the use of information, drawings, etc. in this catalog, we shall not guarantee the industrial property, intellectual property, and other rights of a third party or grant their licenses. Accordingly, we will not assume responsibility for violation of the third party's rights attributable to such use.

4. No part of this catalog may be reprinted. reproduced or used for other purposes without our written permission.

5. Warranty is limited to the product unit delivered. We will be exempted from responsibility for any damage which may be caused by any defect of this product.

GENERAL NOTES

Documents

Thermal Printer Thermalnestconnectivitysolutions.com/upload/product/... · Printed with Vegetable oil ink. This catalog is made from recycled paper. Specifications are subject to