Embed Size (px)
Citation preview
Thin-Clad Profi le Guide
Thin Clad Profiles Guide.indd 1 1/9/2017 2:19:44 PM
Notes
SHAPES AND SIZES
Thin-Clad Renaissance® Units are available in a variety of standard sizes in two unique systems:
ARRIS•tile Renaissance® Units CODE HEIGHT LENGTH BED* RS358 TILE 3-5/8” 23-5/8” 3/4” RS758 TILE 7-5/8” 23-5/8” 3/4” RS115 TILE 11-5/8” 23-5/8” 3/4”
* Due to the allowable weight restrictions of 15 lbs/ft 2 for adhered units, the thickness of the ARRIS•tile units is limited to a maximum of 3/4” with rocked finish and 1-3/8” with smooth finish.
ARRIS•clip Renaissance® Units CODE HEIGHT LENGTH BED RS358 CLIP 3-5/8” 23-5/8” 1-3/8” RS758 CLIP 7-5/8” 23-5/8” 1-3/8” RS115 CLIP 11-5/8” 23-5/8” 1-3/8”
Corner units with 3-5/8” returns can be provided for smooth and rocked finishes for each of the Thin-Clad Renaissance® Unit systems. Return corner units are 22-7/8” long. Additional custom shapes and sizes are available, up to a maximum length of 23-5/8” and face rise of 11-5/8”.
Contact your local Arriscraft representative or dealer for additional information.
GENERAL NOTES
For applicable tolerances and further information refer to 09300 - Thin Calcium Silicate Masonry Units.
Certain applications may require an engineered anchoring system for support. Refer to ARRISCRAFT.NOTEs, Connectors, Part I & II.
ARRIS•tile and ARRIS•clip Renaissance® Units must be installed using industry recommended materials and techniques and conform to all related building requirements.
Proper care, installation and cleaning are required for warranty validation.
Thin Clad Profiles Guide.indd 2 1/9/2017 2:19:44 PM
Table of ContentsARRIS■tile SMOOTH 4
ARRIS■tile RETURN SMOOTH 4
ARRIS■tile ROCKED 5
ARRIS■tile RETURN ROCKED 5
ARRIS■tile SILL 6
ARRIS■tile SILL RETURN 6
ARRIS■tile BULLNOSE 7
ARRIS■tile BULLNOSE RETURN 7
ARRIS■tile EXTRA THICK 8
ARRIS■tile EXTRA THICK RETURN 8
ARRIS■tile EXTRA THICK WITH CHAMFER ON ONE LONG EDGE 9
ARRIS■tile EXTRA THICK RETURN WITH CHAMFER ON ONE LONG EDGE 9
ARRIS■tile EXTRA THICK WITH NOTCH ON ONE LONG EDGE 10
ARRIS■tile EXTRA THICK RETURN WITH NOTCH ON ONE LONG EDGE 10
ARRIS■tile SOLDIERED TILE CORNERS 11
SAMPLE ARRIS■tile CUSTOM STONE WINDOW SURROUNDS 12
ARRIS■clip SMOOTH 13
ARRIS■clip RETURN SMOOTH 13
ARRIS■clip SMOOTH FINISHED END STRETCHER 14
ARRIS■clip SMOOTH QUIRK MITRED STRETCHER 14
ARRIS■clip ROCKED 15
ARRIS■clip RETURN ROCKED 15
ARRIS■clip ROCKED FINISHED END 16
ARRIS■clip ROCK QUIRK MITRED FINISHED END 16
ARRIS■clip SILL 17
ARRIS■clip SILL RETURN 17
ARRIS■clip BULLNOSE 18
ARRIS■clip BULLNOSE RETURN 18
ARRIS■clip EXTRA THICK SMOOTH 19
ARRIS■clip EXTRA THICK RETURN SMOOTH 19
ARRIS■clip EXTRA THICK ROCKED 20
ARRIS■clip EXTRA THICK RETURN ROCKED 20
ARRIS■clip EXTRA THICK WITH CHAMFER ON ONE LONG EDGE 21
ARRIS■clip EXTRA THICK RETURN WITH CHAMFER ON ONE LONG EDGE 21
ARRIS■clip EXTRA THICK WITH NOTCH ON ONE LONG EDGE 22
ARRIS■clip EXTRA THICK RETURN WITH NOTCH ON ONE LONG EDGE 22
ARRIS■clip SOLDIERED 23
ARRIS■clip SOLDIERED RETURN 23
Thin Clad Profiles Guide.indd 3 1/9/2017 2:19:44 PM
4 Thin-Clad Profiles Guide
ARRIS■tile RETURN SMOOTH
T
H L
ARRIS■tile SMOOTH
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 3/4”
7-5/8” 23-5/8” 3/4”
11-5/8” 23-5/8” 3/4”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH(L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 3/4”
7-5/8” 22-7/8” MAX. 3-5/8” 3/4”
11-5/8” 22-7/8” MAX. 3-5/8” 3/4”
L
T
T
D
H
Thin Clad Profiles Guide.indd 4 1/9/2017 2:19:44 PM
5Thin-Clad Profiles Guide
H
L
T
T
D
ARRIS■tile RETURN ROCKED
ARRIS■tile ROCKED
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 3/4”
7-5/8” 23-5/8” 3/4”
11-5/8” 23-5/8” 3/4”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH(L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 3/4”
7-5/8” 22-7/8” MAX. 3-5/8” 3/4”
11-5/8” 22-7/8” MAX. 3-5/8” 3/4”
L
T
H
Thin Clad Profiles Guide.indd 5 1/9/2017 2:19:45 PM
6 Thin-Clad Profiles Guide
ARRIS■tile SILL RETURN
ARRIS■tile SILL
Right Return Shown.Left Return Opposite
Thin Clad Profiles Guide.indd 6 1/9/2017 2:19:45 PM
7Thin-Clad Profiles Guide
ARRIS■tile BULLNOSE RETURN
ARRIS■tile BULLNOSE
Thin Clad Profiles Guide.indd 7 1/9/2017 2:19:46 PM
8 Thin-Clad Profiles Guide
ARRIS■tile EXTRA THICK
ARRIS■tile EXTRA THICK RETURN
L
TD
T
H
L
H
T
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
7-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
11-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
STANDARD FINISH: Smooth
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
STANDARD FINISH: Smooth
Thin Clad Profiles Guide.indd 8 1/9/2017 2:19:46 PM
9Thin-Clad Profiles Guide
ARRIS■tile EXTRA THICK WITH CHAMFER ON ONE LONG EDGE
ARRIS■tile EXTRA THICK RETURN WITH CHAMFER ON ONE LONG EDGE
L
H
T
T
H
L
DT
T
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
7-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
11-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
STANDARD FINISH: Smooth
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
STANDARD FINISH: Smooth
Right Return Shown.Left Return Opposite
Thin Clad Profiles Guide.indd 9 1/9/2017 2:19:47 PM
10 Thin-Clad Profiles Guide
L
T
H
ARRIS■tile EXTRA THICK WITH NOTCH ON ONE LONG EDGE
ARRIS■tile EXTRA THICK RETURN WITH NOTCH ON ONE LONG EDGE
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
STANDARD FINISH: Smooth
TT
L
T
D
HAVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
7-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
11-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
STANDARD FINISH: Smooth
Right Return Shown.Left Return Opposite
Thin Clad Profiles Guide.indd 10 1/9/2017 2:19:47 PM
11Thin-Clad Profiles Guide
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
THICKNESS (T)
23-5/8” 3-5/8” 3-5/8” 3/4”
23-5/8” 7-5/8” 3-5/8” 3/4”
23-5/8” 10-7/8” 3-5/8” 3/4”
STANDARD FINISH: Smooth, Rocked
ARRIS■tile SOLDIERED TILE CORNERS
D
L
HT
Thin Clad Profiles Guide.indd 11 1/9/2017 2:19:48 PM
12 Thin-Clad Profiles Guide
SAMPLE ARRIS■tile CUSTOM STONE WINDOW SURROUNDS
NOTES- All window surrounds are custom. These are samples only. - Please consult with Arriscraft Technical Services for assistance with your particular design.
AB
C
Thin Clad Profiles Guide.indd 12 1/9/2017 2:19:48 PM
13Thin-Clad Profiles Guide
ARRIS■clip RETURN SMOOTH
ARRIS■clip SMOOTH
T T
H
L
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
L
H
D
T
FINISHEDFACESAVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
7-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
11-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
Thin Clad Profiles Guide.indd 13 1/9/2017 2:19:48 PM
14 Thin-Clad Profiles Guide
ARRIS■clip SMOOTH FINISHED END STRETCHER
ARRIS■clip SMOOTH QUIRK MITRED STRETCHER
T
H
L
T
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
T
T
TL
L
H
Thin Clad Profiles Guide.indd 14 1/9/2017 2:19:49 PM
15Thin-Clad Profiles Guide
ARRIS■clip RETURN ROCKED
ARRIS■clip ROCKED
L
H
D
T
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
7-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
11-5/8” 22-7/8” MAX. 3-5/8” 1-3/8”
T
T
H
L
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
Thin Clad Profiles Guide.indd 15 1/9/2017 2:19:49 PM
16 Thin-Clad Profiles Guide
ARRIS■clip ROCKED QUIRK MITRED END
L
L
T
T
H
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 1-3/8”
7-5/8” 23-5/8” 1-3/8”
11-5/8” 23-5/8” 1-3/8”
Thin Clad Profiles Guide.indd 16 1/9/2017 2:19:49 PM
17Thin-Clad Profiles Guide
ARRIS■clip SILL RETURN
ARRIS■clip SILL
Thin Clad Profiles Guide.indd 17 1/9/2017 2:19:50 PM
18 Thin-Clad Profiles Guide
ARRIS■clip BULLNOSE RETURN
ARRIS■clip BULLNOSE
Thin Clad Profiles Guide.indd 18 1/9/2017 2:19:50 PM
19Thin-Clad Profiles Guide
AVAILABLE SIZES:
HEIGHT (H)
LENGTH(L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 2”
7-5/8” 22-7/8” MAX. 3-5/8” 2”
11-5/8” 22-7/8” MAX. 3-5/8” 2”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 2”
7-5/8” 23-5/8” 2”
11-5/8” 23-5/8” 2”
ARRIS■clip EXTRA THICK SMOOTH
ARRIS■clip EXTRA THICK RETURN SMOOTH
LT
T
H
L
H
D
T
Thin Clad Profiles Guide.indd 19 1/9/2017 2:19:51 PM
20 Thin-Clad Profiles Guide
ARRIS■clip EXTRA THICK ROCKED
ARRIS■clip EXTRA THICK RETURN ROCKED
AVAILABLE SIZES:
HEIGHT (H)
LENGTH(L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 2”
7-5/8” 22-7/8” MAX. 3-5/8” 2”
11-5/8” 22-7/8” MAX. 3-5/8” 2”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 2”
7-5/8” 23-5/8” 2”
11-5/8” 23-5/8” 2”
T
D
H
L
L
T
H
T
Thin Clad Profiles Guide.indd 20 1/9/2017 2:19:51 PM
21Thin-Clad Profiles Guide
T
T
H
L
ARRIS■clip EXTRA THICK WITH CHAMFER ON ONE LONG EDGE
ARRIS■clip EXTRA THICK RETURN WITH CHAMFER ON ONE LONG EDGE
T
D
H
H
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 2”
7-5/8” 23-5/8” 2”
11-5/8” 23-5/8” 2”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH(L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 2”
7-5/8” 22-7/8” MAX. 3-5/8” 2”
11-5/8” 22-7/8” MAX. 3-5/8” 2”
Thin Clad Profiles Guide.indd 21 1/9/2017 2:19:52 PM
22 Thin-Clad Profiles Guide
ARRIS■clip EXTRA THICK WITH NOTCH ON ONE LONG EDGE
ARRIS■clip EXTRA THICK RETURN WITH NOTCH ON ONE LONG EDGE
T
T
H
L
T
D
H
L
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. THICKNESS (T)
3-5/8” 23-5/8” 2”
7-5/8” 23-5/8” 2”
11-5/8” 23-5/8” 2”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH(L)
STD. DEPTH(D)
STD. THICKNESS (T)
3-5/8” 22-7/8” MAX. 3-5/8” 2”
7-5/8” 22-7/8” MAX. 3-5/8” 2”
11-5/8” 22-7/8” MAX. 3-5/8” 2”
Thin Clad Profiles Guide.indd 22 1/9/2017 2:19:53 PM
23Thin-Clad Profiles Guide
ARRIS■clip SOLDIERED
ARRIS■clip SOLDIERED RETURN
T
T
H
L
H
D
D
L
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
THICKNESS (T)
23-5/8” 3-5/8” 3-5/8” 1-3/8” or 2”
23-5/8” 7-5/8” 3-5/8” 1-3/8” or 2”
23-5/8” 11-5/8” 3-5/8” 1-3/8” or 2”
AVAILABLE SIZES:
HEIGHT (H)
LENGTH (L)
STD. DEPTH(D)
THICKNESS (T)
23-5/8” 7-5/8” 3-5/8” 1-3/8” or 2”
23-5/8” 10-7/8” 3-5/8” 1-3/8” or 2”
Thin Clad Profiles Guide.indd 23 1/9/2017 2:19:53 PM
Thin Clad Profiles Guide.indd 24 1/9/2017 2:19:53 PM
