Upload
letuyen
View
226
Download
2
Embed Size (px)
Citation preview
This book musT be read,prior To operaTion.
SAFETY INSTRUCTIONSFOR ASSASSIN JETTERS
HIGH PRESSURE WATER JETTERS&
PRESSURE CLEANERS
1300 855 145www.assassinjetters.com.au
Assassin High Pressure Cleaners and Jetters Operating Manual Page2
•
•
•
•
•
•
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Assassin High Pressure Cleaners and Jetters Operating Manual Page3
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Assassin High Pressure Cleaners and Jetters Operating Manual Page4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Assassin High Pressure Cleaners and Jetters Operating Manual Page5
•
•
•
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Assassin High Pressure Cleaners and Jetters Operating Manual Page6
•
•
•
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Assassin High Pressure Cleaners and Jetters Operating Manual Page7
•
• •
PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com
Assassin High Pressure Cleaners and Jetters Operating Manual Page22
Signature_________________________Date _________Name on Card______________________ SEC# ______
______ ______ ______ ______ EXP ________#C/CPHONE ________________ M ________________________SUBURB ________________________P/Code ________ADDRESS _______________________________________NAME ________________________________
GENERAL NOZZLE RANGE
SD6R1F
BT6R1F
BV6R2F
$126+
$126+
$132+
Screwdriver nozzle
Bandit nozzle
beaver nozzle
The New Screwdriver nozzle features a bladeat the front of the nozzle with an offset jet so you can clear most stubborn blockages just bytwisting the hose. Also has 6 rear thrusting jets.
The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrustRecommend using a speed cone with this nozzle6 rear jets at a tight angle and one front jet.
The Beaver nozzle has 2 offset forward facing jets that help penetrate at the front of the nozzleand 6 rear jets to quickly thrust the nozzle to the blockage. Has reduced thrust due to 2 front jets.
RR6R1F
F6R2F
$134+
$132+
Root rat nozzle
ferret Nozzle
This is a popular nozzle because of it’s jetconfiguration. 1 forward, 3 behind the noseat 45 deg and 3 at the rear at 30 deg. It willopen a blockage quickly and thoroughly.
P3R1FPredator penetrator nozzle$119+3 large rear jets and 1 forward jet
P6R1FPredator invader nozzleGreat penetrating thruster 6 rear jets, 1 forward jet
$123+
P6RPredator thruster nozzleThe Predator - 1/4” BSP Good general penetratingnozzle with pointed nose $121+6 rear thrusting jets only
N3R1FNegotiator penetrator nozzle$114+3 large rear jets and 1 forward jet
N6R1FNegotiator invader nozzleGreat penetrating thruster 6 rear jets, 1 forward jet
$118+
N6RNegotiator thruster nozzleThe Negotiator - 1/4” BSP Negotiates itself around
tight traps and bends $116+6 rear thrusting jets only
C3R1FCompressor penetrator nozzle $88+3 large rear jets and 1 forward jet
C6R1FCompressor invader nozzleGreat penetrating thruster 6 rear jets, 1 forward jet
$92
C6RCompressor thruster nozzleThe Compressor - 1/8” BSP Used for tight access drains, whip
hoses and the Bullet adaptor $90+6 rear thrusting jets only
GB8$120+
Grease BallThe New Grease Ball nozzle is totally spherical with 8 rear thrusting jets only. Designed for extreme thrust and the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes.
The Ferret nozzle has 2 offset forward facing jets that help penetrate at the front of the nozzle,3 rear jets on the side and 3 jets at the back of the nozzle. Has reduced thrust due to 2 front jets.
B6R1FC$166+
Bullet nozzleThis is a great nozzle for penetrating tightblockages because the nozzle is forward of the cone helping it to burrow deep intothe choke. 3 Compressor tips available.
$46+
$27+
$46+
$27+
cONE & TAIL - 1/4”
hose tail - 1/4”
CT8
HT8
CT4
HT4
CONE & tail - 1/8”
hose tail - 1/8”
Quick release connectors with alan key broach
Buy together and save!
QR8SS$64+
Stainless steel quick release1/4” with Patented double silt proof o’ring
QR8BR$39+
Brass quick release1/4” with Patented double silt proof o’ring
2010 GENERAL ORDER FORM P1
PVC wear cone - 1/4” and 1/8”
pvc wear cone - 1/4” pvc wear cone - 1/8”
$19+$19+
PC8PC4
ADDRESS 2/232 Manns Rd, West Gosford 2250PHONE 1300 855 145EMAIL [email protected] www.assassinjetters.com.au
SALES - ENQUIRIES - 1300 855 145
Assassin High Pressure Cleaners and Jetters Operating Manual Page23
SA$165+
$620+
RBS
Sonde Adaptor
Ridgid battery Sonde
6 rear jets thrust the Ridgid Sonde down the drain for quick pipe locationSonde Adaptor Complete SAC $211+
Ridgid Battery Sonde used with the Sonde Adaptor
$30+
CA81/4“ x 1/8” Compressor adaptorUsed to join the Compressor nozzleto the end of the 1/4” male hose tail
$27+
HT8MS1/4“ Male connector - ShortQuick release to 1/4” female fittings
$27+
HT8MSF1/4“ Stubbie tailQuick release for Root Ranger only
(With alan key broach)
$74+BA41/8” Bullet blank
Used to join the Compressor nozzle to the quick release adaptor
(With alan key broach)
$1490+
$38+
$860+
MNBKD
SSE
MNBKBMustang Nozzles Budget Box
Mustang Nozzles deluxe Box
1/4“ Turbine Extension
Save money - Buy a box!7 Piece Nozzle box
Save money - Buy a box!15 Piece Nozzle box
This extension prevents the turbine from turning around inside a 6” drain
TC$19+
tIP cLEANER WITH cAPSULEFor cleaning all Mustang Nozzles
$29+PC4SS1/8“ SS wear cone
Suit 1/8” male tail behind nozzleprotecting the quick release coupler
$29+PC8SS1/4“ SS wear cone
Suit 1/4” male tail behind nozzleprotecting the quick release coupler
For repairing 1/8” Synflex, Mustang and Armadillo Water Jetter hose - short
For repairing 3/16” Synflex, Mustang and Armadillo Water Jetter hose - Short
For repairing 1/4” Synflex, Mustang and Armadillo Water Jetter hose - short
$18+
$20+
HR4
HR6S
1/8“ Hose Tail Swage
3/16“ Hose Tail Short Swage
1/4“ Hose Tail short Swage$20+
HR8S
Suit all pumps and reels up to 10,000psi Comes with built in spike arrestor $45+
PGReplacement Pressure gauge 10,000psi
This SS blade adapts onto the Root Rangerso you can feel if the drain has been cleaned $175+
BCCThe Blade Cutter Complete
$180ea+CE4100/150/350mm SS Nozzle Extensions
Used to extend the length of the nozzles to prevent them turning around in pipe
$31+
HT12M3/8“ male connectorQuick release to 3/8” nozzles
(With alan key broach)
HT4M$27+
1/8“ Male connectorQuick release to compressor nozzles
(With alan key broach - for 1/8” Nozzles)
$27+
HT8M1/4“ male connectorQuick release to 1/4” nozzles
(With alan key broach - for 1/4” Nozzles)
HT4F$27+
1/8“ female connectorQuick release to 1/8” male fittings
$27+
HT8F1/4“ female connectorQuick release to 1/4” male fittings
ACCESSORIES AND HOSES
2010 GENERAL ORDER FORM P2
EHCSSBall valve handle SSHeavy duty cast stainless handle makes any ball valve easier and safer to use $38+
BUILT TO BLAST
www.assassinjetters.com.au
SALES - ENQUIRIES - 1300 855 145
$390+
Small High Pressure hose reel
hose reel
bracket
optional SS shortened bracket available - $158+
Large High Pressure hose reel
Fixed bracket - Carries: 40m 3/8” Jet Hose 50m 1/4” Jet Hose60m 3/16” Jet Hose40M ½”Garden Hose30M 3/4” Garden Hose
Separate bracket - Carries: 40m 3/8” Jet Hose50m 1/4” Jet Hose60m 3/16” Jet Hose40M ½”Garden Hose30M 3/4” Garden Hose
$99+
$550+
PW-134
4416
4416
b u i l t t o b l a s t
60m x3/8” 65m x ¼” 55m x 3/16” 15mx1/8”
ST3/8 ST1/4 ST3/16 ST1/8$840+ $780+ $660+ $200+
How do you make jetting hose last longer? ..... Buy Stinger 5000 Jetting Hose!
Sewer and storm water jetting hose. Long lasting hose specially formulated for jetting PVC & VCP pipe. Outlasts all others.
(including desired tail)
Assassin High Pressure Cleaners and Jetters Operating Manual Page24
Root ranger completeRoot cutting turbine with removable front plug and quick connect adaptor
ROOT CUTTERS & LARGE NOZZLE RANGE
WARTHOG ROOT CUTTERS
RR8TC$320+
RRDB$525+
$149+T83055
Double barrel Root ranger
Replacement turbine
WGS25
LRR8TC
WT 10
WH 12
$39+
$495+
$798+
$490+
Root ranger extension
Large Root ranger
warthog WT 3/8”
SEWER SHAFTCLEANING SET
½” Root cutting turbine Used to clear tree roots from within sewer shaftsand boundary traps.Comes complete with areversed 45 degreeturbine to enable youto clear roots within a 45 degree junction within vertical shaft. Also comes with a 90 degree extensionand a straight extension.1 turbine included.
Spinning root cutter4000 PSI20-48 LPMPressure and Flow Dependant
Prevents the Nozzle from turning up inspection caps
Adaptor available to quick connect or screw into 1/4” hose. Flow rate from 21 LPM to 90 LPM.
Twin Root cutting turbineswith quick connect adaptor
Suit Root Ranger. Can also be used on the end of hand lances
SS8TM
LSS8TM
$171+
$245+
$108+RTRK8
180 Degree pressure bend
180 Degree pressure bend
Root Ranger Repair Kit
With front plug only suit Root Ranger
Suit Large Root Ranger
Replacement ceramic insert
$36+M6JRoot Ranger Front jet
Removable front ceramic jet with flow straightener in body
2010 GENERAL ORDER FORM P3
BT6R1F12
BT6R1F10
SD6R1F12
$138+
$140+
$168+
$170+
Bandit nozzle 3/8”
screwdriver nozzle 3/8”
Bandit nozzle ½”
screwdriver nozzle ½”
The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust6 rear jets at a tight angle and one front jet.
The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust6 rear jets at a tight angle and one front jet.
*Price may vary depending on the $US
*Price may vary depending on the $US
$249+LT83055Replacement turbine
Suit Large Root Ranger. Can also be used on the end of hand lances
The New Screwdriver nozzle features a bladeat the front of the nozzle with an offset jet so you can clear most stubborn blockages just bytwisting the hose. Also has 6 rear thrusting jets.
The New Screwdriver nozzle features a bladeat the front of the nozzle with an offset jet so you can clear most stubborn blockages just bytwisting the hose. Also has 6 rear thrusting jets.
SD6R1F10
www.assassinjetters.com.au
SALES - ENQUIRIES - 1300 855 145