Thomafluid iii...THOMAFLUID® III - 2015 Tubing Olive Connectors (I-Ø: 3 - 25 mm) 3 - 19 • made of HDPE, PA, PBT, POM, PP, PP glass fibre reinforced, PTFE, PVDF, TPX • barb unions,

Shopping per mouseclickwww.rct-online.de

Thomafluid® iiiConnectors made of plastics

Tubing olive Connectors

Screw Joints for Pipes and Tubings

Quick-Release Coupling Systems

Threaded adapter

Conductive Connectors

Tri-Clamp Connections

Reichelt Chemietechnik ’15

Reichelt ChemietechnikGmbh + Co.

Studentenkarzer in Heidelberg

Englerstraße 18D-69126 HeidelbergGermanyTel. +49 6221 3125 0Fax +49 6221 3125 10

email:[email protected]:www.rct-online.de

Reichelt ChemietechnikGmbh + Co.

THOMAFLUID® III - 2015

Tubing Olive Connectors (I-Ø: 3 - 25 mm) 3 - 19

• made of HDPE, PA, PBT, POM, PP, PP glass fibre reinforced, PTFE, PVDF, TPX • barb unions, glass olive adapters, magic boxes, water flow regulation adapter • straight, reducing, T , Y , cross, elbow, bulkhead partially: with external or internal thread, with collar, detachable • Accessories: lock nuts and gaskets made of PE

Screw Joints for Tubings (I-Ø: 1.6 - 12 mm) 20 - 49

• made of PFA, POM, PP, PP natural, PVDF • for metric and imperial tubing / pipes • straight, reducing, T, cross, elbow, bulkhead, swiveling partially: with external or internal thread

Screw Connections for Fabric Tubing (I-Ø: 4 - 13 mm) 49 - 55

• made of PP and PVDF • straight, T, elbow (partially with external thread)

Screw Joints for Pipes (O-Ø: 0.7 - 25 mm) 55 - 91

• made of PA, PFA, PP, PTFE, PVDF • micro connector, MULTIFIT® connector, pipe connector,

tubing screw joint system for corrugated pipes, accessories • straight, reducing, T, cross, elbow, bulkhead partially: with external or internal thread

Quick-Release Coupling Systems for Pipes (O-Ø: 4 - 32 mm) 91 - 100

• made of glass fibre reinforced Nylon 6.6, nickel-plated brass, PP, acetal• straight, reducing, T, Y, elbow, bulkhead partially: with external or internal thread, with coupling pipe

Inhaltsübersicht nach Werkstoffen (Elastomere) SeiteContent: One-Piece Connectors - Plastics page

THOMAFLUID® III - 2015

Content: One-Piece Connectors - Plastics page

Threaded Adapter 100 - 104

• made of HDPE, PFA, POM, PP, PP glass fibre reinforced, PTFE, PVDF• double nipple, threaded sleeve, extension piece,

locking screw, screw cap • straight, reducing, elbow partially detachable

Conductive Connector 104 - 109

• made of PP and PVDF• tube connector, pipe connector• straight, elbow partially with external thread

Tri-Clamp Connections 109 - 112

• made of PFA, PP, PTFE, PVDF• tube connector, pipe connector, accessories• straight

partially with external thread

Screw Joints with Cap Nut DIN 8063 112

• made of PFA, PP, PVDF

More screw joints: see handbook THOMAFLUID® IV

THOMAFLUID® III - 2015 3

Fittings - Tubing Olive Connectors (3 - 25 mm) One-Piece Connectors - Plastics

FittingsOne-Piece Connectors - Plastics Tubing Olive Connectors (I-Ø: 3 - 25 mm)

THOMAFLUID®-Straight Barb Union made of POM - with hex collar

Item For tubing inside Ø Nominal width Unit Price mm mm piece EURO

94175 4 2.7 10 16.0094176 5 3 10 16.0094177 6 4 10 21.0094178 8 5.6 10 21.0026380 10 7 8 28.0026381 12 8.6 8 24.0026382 13 8.6 8 28.0026383 14 10 4 24.0026384 16 12 4 26.0026385 19 15 4 32.00

THOMAFLUID®-Straight Barb Union (reducing) made of POM

Item For tubing inside Ø (A)

For tubing inside Ø (B)

Nominal width

Unit Price

mm mm mm piece EURO

94180 6 4 2.7 10 21.0094181 8 4 2.7 10 29.0094182 8 6 4 10 34.0026386 10 6 4 10 46.0026387 10 8 5.6 10 46.0026388 12 8 5.6 10 46.0094909 12 10 7 10 46.00

THOMAFLUID®-T-Shaped Barb Union made of POM


26389 4 2.5 10 21.0026390 5 3 10 23.0026391 6 4 10 29.0026392 8 5.6 10 31.0026393 10 7 8 40.0026394 12 8.6 8 44.0026395 13 9 8 52.0026396 14 10 8 52.0026397 15 11 4 40.0026398 16 12 4 42.0026399 19 15 4 70.00

THOMAFLUID®-T-Shaped Reducing Connector made of POM

Item For tubing inside Ø

(A)

For tubing inside Ø

(B)

Nominal width

(A)

Nominal width

(B)

Unit Price

mm mm mm mm piece EURO

26400 4 6 2.5 4 10 34.0026401 6 4 4 2.5 10 34.0026402 8 4 5.6 2.5 10 36.0026403 8 6 5.6 4 10 36.0026404 10 6 7 4 8 36.0026405 10 8 7 5.6 8 44.0026406 12 8 8.6 5.6 4 34.0026407 12 10 8.6 7 4 44.0026408 8 12 5.6 8.6 4 44.0026409 18 15 14 11 4 54.00

4 THOMAFLUID® III - 2015


THOMAFLUID®-Y-Shaped Barb Union made of POM


94190 4 2.5 10 21.0094191 5 3 10 26.0094192 6 4 10 44.0094193 8 5.6 10 44.0026410 10 7 8 44.0026411 12 8.6 8 52.0026412 13 9 8 56.0026413 14 10 4 32.0026414 16 12 4 42.0026415 19 15 4 44.00

THOMAFLUID®-Y-Shaped Reducing Connector made of POM


(A)

For tubing inside Ø

(B)

Nominal width

(A)

Nominal width

(B)

Unit Price


26416 4 6 2.7 4 10 29.0026417 6 8 4 5.6 10 39.00

THOMAFLUID®-Cross Barb Union made of POM


26418 4 2.9 10 31.0026419 5 3 10 39.0026420 6 4 10 44.00

THOMAFLUID®-Magic Box „Laboratory“ made of POM - 40 pieces

Product specification• Connecting pieces and adapters made of POM. Set contains:

20 connectors à 5 pieces each: item 94175-7812 adapters à 4 pieces each: item 94180-828 Y-connectors à 2 pieces each: item 94190-93

Item Unit Price piece EURO

94199 1 75.00

THOMAFLUID®-Magic Box „Pilot Plant“ made of POM - 63 pieces


12 connectors à 2 pieces each: item 26380-858 adapters à 2 pieces each: item 26386-88 / 9490912 T-connectors à 2 pieces each: item 26389-9412 T-adapters à 2 pieces each: item 26400-0512 Y-connectors à 2 pieces each: item 26410-154 Y-adapters à 2 pieces each: item 26416-13 Cross connectors à 1 piece each: item 26418-20


942001 1 126.00

ØØ



THOMAFLUID®-Magic Box „Plant“ made of POM - 71 pieces


20 connectors à 2 pieces each: item 94175-78 / 26380-858 adapters à 2 pieces each: item 26386-88 / 9490912 T-connectors à 2 pieces each: item 26394-9912 T-adapters à 2 pieces each: item 26404-0912 Y-connectors à 2 pieces each: item 26410-154 Y-adapters à 2 pieces each: item 26416-13 Cross connectors à 1 piece each: item 26418-20


942011 1 141.00

THOMAFLUID®-Straight Barb Union made of POM - Bulkhead

Technical specification• Material: POM (polyoxymethylene)• Outfit: with counter nut (nickel-plated brass) for control panel mounting• Temperature range: -15 to +80 °C• Bulkhead thread diameter: 12.7 mm• Bulkhead thread length: approx. 10 mm

Item For tubing inside Ø Unit Price mm piece EURO

13951 4 3 33.0013952 6.4 3 33.0013953 9.5 3 33.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of POM

Product specification• Male G-thread on one side, hose nozzle on the other side

Item For tubing

inside Ø

External thread

L l1 l2 Unit Price


14692 4 G 1/4“ 29 8 17 5 23.0014693 6 G 1/4“ 29 8 17 5 26.0014694 6 G 3/8“ 39 9 22 5 29.0014695 9 G 3/8“ 39 9 22 5 34.0014696 13 G 3/8“ 42 9 25 5 36.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of POM - Bulkhead

Product specification• Male G-thread on one side; hose nozzle on the other side

Item For tubing

inside Ø

External thread

L l1 l2 Unit Price


14701 4 G 1/4“ 43 7 8 5 34.0014702 6 G 1/4“ 43 8 8 5 36.00

THOMAFLUID®-Connectors made of PA

General technical specification• Material: PA 6• Temperature range: -10 to +70 °C• Max. operating pressure: 8 bar• Tensile strength: 78 N/mm2 (DIN 53455)• Elongation at break: >50 % (DIN 53455)• Elastic modulus: 3,200 MPa (ISO 527)• Impact toughness: without break (DIN 53453)• Notch impact strength (Charpy): 3 kJ/m2 (ISO 179)• Ball pressure hardness: 160 N/mm2 (ISO 2039-1)



THOMAFLUID®-Straight Barb Connector with Male Thread made of PA


External thread

Nominal width

Length Unit Price

mm mm mm piece EURO

26421 4 M8 x 1.25 2.5 27 10 26.0026422 4 M8 x 1 2.5 27 10 26.0026423 4 M10 x 1 2.5 27 10 26.0026424 4 M12 x 1.5 2.5 32 10 50.0026425 4 M14 x 1.5 2.5 32 10 46.0026426 4 R 1/8“ 2.5 27 10 31.0026427 4 R 1/4“ 2.5 32 10 31.0026428 4 NPT 1/8“ 2.5 29 10 31.0026429 4 NPT 1/4“ 2.5 35 10 31.0026430 5 M12 x 1.5 3 36 10 41.0026431 5 M14 x 1.5 3 36 10 41.0026432 5 R 1/4“ 3 36 6 42.0026433 5 NPT 1/4“ 3 39 6 42.0026434 6 M10 x 1 4 33 10 43.0026435 6 M12 x 1.5 4 38 10 44.0026436 6 M14 x 1.5 4 37 10 44.0026437 6 R 1/8“ 4 33 10 44.0026438 6 R 1/4“ 4 38 10 44.0026439 6 NPT 1/8“ 4 35 10 44.0026440 6 NPT 1/4“ 4 41 10 44.0026441 8 M10 x 1 5.6 38 10 44.0026442 8 M12 x 1.5 5.6 41 10 44.0026443 8 M14 x 1.5 5.6 41 10 46.0026444 8 M18 x 1.5 5.6 49 8 48.0026445 8 M22 x 1.5 5.6 49 8 48.0026446 8 M26 x 1.5 5.6 49 8 48.0026447 8 R 1/4“ 5.6 41 10 49.0026448 8 R 3/8“ 5.6 41 8 44.0026449 8 R 1/2“ 5.6 49 8 44.0026450 8 NPT 1/4“ 5.6 44 10 44.0026451 10 M12 x 1.5 7 44 10 49.0026452 10 M14 x 1.5 7 44 10 49.0026453 10 M16 x 1.5 7 44 10 49.0026454 10 R 1/4“ 7 44 10 41.0026455 10 R 3/8“ 7 44 10 41.0026456 10 NPT 1/4“ 7 47 10 44.0026457 10 NPT 3/8“ 7 47 10 44.0026458 12 M16 x 1.5 8.6 46 8 44.0026459 12 M18 x 1.5 8.6 54 8 44.0026460 12 M22 x 1.5 8.6 54 8 44.0026461 12 M26 x 1.5 8.6 54 8 44.0026462 12 R 3/8“ 8.6 46 8 44.00


External thread

Nominal width

Length Unit Price

mm mm mm piece EURO

26463 12 R 1/2“ 8.6 54 8 44.0026464 12 NPT 3/8“ 8.6 48 8 44.0026465 14 M18 x 1.5 10 56 8 44.0026466 14 M20 x 1.5 10 56 8 44.0026467 14 M22 x 1.5 10 56 8 44.0026468 14 R 1/2“ 10 56 8 44.0026469 14 R 3/8“ 10 56 8 44.0026470 14 NPT 1/2“ 10 56 8 48.00

THOMAFLUID®-Elbow Barb Connector with Male Thread made of PA


External thread

Nominal width

WAF Unit Price

mm mm mm piece EURO

26471 4 M8 x 1 2.7 10 10 21.0026472 4 M10 x 1 2.7 10 10 39.0026473 4 M12 x 1.5 2.7 14 10 41.0026474 4 M14 x 1.5 2.7 14 10 41.0026475 4 R 1/8“ 2.7 10 10 46.0026476 4 R 1/4“ 2.7 14 10 46.0026477 4 NPT 1/8“ 2.7 10 10 39.0026478 4 NPT 1/4“ 2.7 14 10 39.0026479 6 M10 x 1 4 10 10 39.0026480 6 M12 x 1.5 4 14 10 41.0026481 6 R 1/8“ 4 10 10 49.0026482 6 R 1/4“ 4 14 10 36.0026483 6 NPT 1/8“ 4 10 10 36.0026484 6 NPT 1/4“ 4 14 10 36.0026485 8 M10 x 1 5.6 14 10 52.0026486 8 M12 x 1.5 5.6 14 10 52.0026487 8 M14 x 1.5 5.6 14 10 52.0026488 8 M18 x 1.5 5.6 19 8 56.0026489 8 M22 x 1.5 5.6 22 8 60.0026490 8 R 1/4“ 5.6 14 10 44.0026491 8 R 3/8“ 5.6 17 10 44.0026492 8 R 1/2“ 5.6 22 10 64.0026493 8 NPT 1/4“ 5.6 14 10 39.0026494 12 M16 x 1.5 8.6 17 8 48.0026495 12 M18 x 1.5 8.6 19 8 48.0026496 12 M22 x 1.5 8.6 22 8 48.0026497 12 M26 x 1.5 8.6 22 8 48.0026498 12 R 3/8“ 8.6 17 8 48.0026499 12 R 1/2“ 8.6 22 8 56.0026500 12 NPT 3/8“ 8.6 19 8 56.00



THOMAFLUID®-T-Shaped Barb Connector with Male Thread made of PA


External thread

Nominal width

WAF Unit Price

mm mm mm piece EURO

26508 4 M8 x 1 2.5 10 8 64.0026509 4 M10 x 1 2.5 10 8 64.0026510 4 M12 x 1.5 2.9 14 8 64.0026511 4 R 1/8“ 2.5 10 10 36.0026512 4 R 1/4“ 2.5 14 10 36.0026513 4 NPT 1/8“ 2.5 10 10 41.0026514 4 NPT 1/4“ 2.5 14 8 52.0026501 6 M10 x 1 4 10 10 41.0026502 6 M12 x 1.5 4 14 10 41.0026503 6 R 1/8“ 4 10 10 41.0026504 6 R 1/4“ 4 14 10 41.0026505 6 NPT 1/8“ 4 10 10 41.0026506 6 NPT 1/4“ 4 14 10 70.0026515 8 M12 x 1.5 5.6 14 10 46.0026516 8 M14 x 1.5 5.6 14 10 54.0026517 8 R 1/4“ 5.6 14 10 54.0026518 8 NPT 1/4“ 5.6 14 10 54.00

THOMAFLUID®-Connectors made of TPX

General product specification• TPX is the trade name for compound PMP (Polymethylpentene).• The material is highly transparent. In contrast to other transparent

resins, it is of remarkable stability combined with high chemical and temperature resistance.

• The material is non-toxic and can be used in food application areas as well as in medicine and biology.

• TPX tubing connectors allow optimal flow control of liquids due to their absolute transparency.They can be autoclaved several times. They are used at temperatures of -20 to +120 °C.

• TPX tubing connectors have a smooth inner surface producing a constant and reproducible flow rate.

TPX connectors

THOMAFLUID®-Straight Barb Union made of TPX

Product specification• Straight, same tubing adapters on both sides


28556 3 - 5 5 31.0028557 3 - 5 10 47.0028558 5 - 8 5 38.0028559 5 - 8 10 60.0028560 8 - 15 5 51.0028561 8 - 15 10 79.00

THOMAFLUID®-Straight Barb Union (reducing) made of TPX

Product specification• Straight, but with reducing tubing adapters of different sizes on both sides.



Unit Price

mm mm piece EURO

28563 3 - 5 5 - 8 5 41.0028564 3 - 5 5 - 8 10 63.0028565 5 - 8 8 - 15 5 56.0028566 5 - 8 8 - 15 10 87.00

THOMAFLUID®-T-Shaped Barb Union made of TPX

Product specification• T-shape, all outlets with tubing adapters of the same size


28567 3 - 5 5 41.0028568 3 - 5 10 63.0028569 5 - 8 5 56.00




28570 5 - 8 10 87.0028571 8 - 15 5 64.0028572 8 - 15 10 99.00

THOMAFLUID®-Y-Shaped Barb Union made of TPX

Product specification• Y-shape, all outlets with tubing adapters of the same size


28573 3 - 5 5 41.0028574 3 - 5 10 63.0028575 5 - 8 5 56.0028576 5 - 8 10 87.0028577 8 - 15 5 64.0028578 8 - 15 10 99.00

THOMAFLUID®-Straight Barb Union made of HDPE

Product specification• Tubing connections made of natural-coloured, rigid polyethylene

(HDPE).


Nominal width

L Unit Price

inch mm mm piece EURO

40744 3/8“ 7 65 10 19.0040745 1/2“ 9 74 10 21.0040746 3/4“ 15 74 10 23.0040747 1“ 20 84 10 30.00

THOMAFLUID®-Straight Barb Union (reducing) made of HDPE

Product specification• Reducing tubing connections made of natural-coloured,

rigid polyethylene (HDPE).

Item For tubing

inside Ø (A)

Nominal width

(A)

For tubing

inside Ø (B)

Nominal width

(B)

L Unit Price

mm mm mm mm mm piece EURO

40742 19 15 12.7 9 74 10 25.0040743 12.7 9 9.5 7 66 10 25.00

THOMAFLUID®-Straight Barb Connector (reducing) made of HDPE - two-part, detachable

Product specification• Screw fitting made of natural-coloured, rigid polyethylene (HDPE)


Nominal width

Length Unit Price

inch mm mm piece EURO

40749 3/8“ 7 81 7 35.0040750 1/2“ 9 89.5 7 42.0040751 3/4“ 15 93 7 63.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of HDPE

Product specification• Screw-in threaded joints made of natural-coloured, rigid polyethylene

(HDPE) with male R-thread




Nominal width

External thread

L Unit Price

mm mm mm piece EURO

40734 10 7 R 1/2“ 44 10 26.0040735 12 9 R 1/2“ 48 10 30.0040736 12 9 R 3/4“ 50 10 34.0040737 19 15 R 1“ 52 10 40.0040738 25 21 R 5/4“ 64 5 59.0040739 16 13 R 3/4“ 50 5 34.00

THOMAFLUID®-Straight Barb Connector with Female Thread made of HDPE

Product specification• Screw-on threaded joints made of natural-coloured, rigid polyethylene

(HDPE) with cap screw fitting (female R-thread)


Nominal width

Internal thread

Length Unit Price

mm mm mm piece EURO

40729 10 7 R 1/2“ 46 10 26.0040730 12 9 R 3/4“ 50 10 30.0040731 19 15 R 1“ 52 10 40.0040732 25 21 R 5/4“ 80 5 59.00

THOMAFLUID®-Elbow Barb Connector with Female Thread made of HDPE


Nominal width

Internal thread

h Unit Price

mm mm mm piece EURO

40716 12 9 R 3/4“ 25 5 23.00407171 12 9 R 3/4“ 32 5 25.00407181 19 14.6 R 1“ 41 5 30.00407191 10 7 R 1/2“ 31 5 23.00

1 with rubber seal

THOMAFLUID®-Glass-Thread Adapter made of PBT

Produktspezifikation:• The screw thread adapters are deliverable for the following products:

Schott (GL 14), Normag (RD 14), and Corning (SQ 13)• The mating hose nozzles are available in two sizes, with outer diameters

of 4.5 mm and 9 mm resp.

Technische Spezifikation:• Material: PBT (thermoplastic polyester), dyed, glass fibre reinforced• Max. temperature: +180 °C• Sterilisation: autoclavable

Item For tubing inside Ø External thread Unit Price mm piece EURO

40191 4.5 GL14 1 14.0040192 4.5 GL14 5 55.0040193 9 GL14 1 14.0040194 9 GL14 5 55.0040195 4.5 RD14 1 14.0040196 4.5 RD14 5 55.0040197 9 RD14 1 14.0040198 9 RD14 5 55.0040199 4.5 SQ13 1 14.0040200 4.5 SQ13 5 55.0040201 9 SQ13 1 14.0040202 9 SQ13 5 55.00

THOMAFLUID®-Glass Olive Adapter made of PBT

Produktspezifikation:• The glass olive adapters are similar to the screw thread adapters, they

are additionally equipped with a locking ring for mounting on glass olives.• They are deliverable for the following products: Schott (GL 14), Normag

(RD 14), and Corning (SQ 13).• They are hardly stressed and thus protected. There are no problems

with adapting or disconnecting of the adapters, that means no distortion of the tubing.

• The mating hose nozzles are available in two sizes, with outer diameters of 4.5 mm and 9 mm resp.



Technische Spezifikation:• Material: PBT (thermoplastic polyester), dyed, glass fibre reinforced• Max. temperature: +180 °C• Sterilisation: autoclavable

Item For tubing inside Ø External thread Unit Price mm piece EURO

40179 4.5 GL14 1 14.0040180 4.5 GL14 5 51.0040181 9 GL14 1 14.0040182 9 GL14 5 51.0040183 4.5 RD14 1 14.0040184 4.5 RD14 5 51.0040185 9 RD14 1 14.0040186 9 RD14 5 51.0040187 4.5 SQ13 1 14.0040189 9 SQ13 1 14.00

THOMAFLUID®-Glass Olive Adapter made of PBT - Bulkhead

Product specification• The mounting tubing connector is suitable for dashboards or mounting

walls with 1-10 mm thickness. A mounting hole of 8 mm is required. The tubing connector can be installed without tools and guarantees absolute tightness.


40173 4.5 3 51.0040174 4.5 10 118.0040175 4.5 15 141.00

THOMAPLAST®-Straight Barb Union made of PBT - detachable

Product specification• The tubing connectors consist of blue-dyed, glass-fibre reinforced,

thermoplastic polyester (PBT).• The tubing connectors are autoclavable. They are used at temperatures

up to max. +180 °C.• Each adapter tubing connector consists of two hose nozzle adapters

and an adapter coupling. The connection of the two hose nozzles by the adapter coupling ensures absolute tightness.



Unit Price

mm mm piece EURO

40167 4.5 4.5 1 21.0040168 4.5 4.5 5 72.0040169 9 9 1 21.0040170 9 9 5 72.0040171 4.5 9 1 21.0040172 4.5 9 5 72.00

THOMAFLUID®-Straight Barb Union made of PP - with collar

Product specification• Tubing connections on both sides


60811 4 - 6 3 10 46.0060812 6 - 8 5 10 46.0060813 8 - 10 7 10 52.0060814 10 - 12 9 10 52.0060815 12 - 14 11 5 31.0060816 14 - 16 13 5 36.00



THOMAFLUID®-Straight Barb Union made of HDPE - detachable

Product specification• Tubing connections on both sides, two-part


60791 3 - 5 8 28.0060792 5 - 7 8 36.0060793 7 - 9 8 40.0060794 9 - 12 8 40.0060795 11 - 14 4 24.0060796 13 - 16 4 30.00

THOMAFLUID®-Straight Barb Union (reducing) made of PP

Product specification• Tubing connections on both sides



Unit Price

mm mm piece EURO

60817 4 - 8 8 - 12 5 23.0060818 4 - 8 12 - 16 5 29.0060819 8 - 12 12 - 16 5 34.00

THOMAFLUID®-Straight Barb Union made of PP/PVDF

Product specification• Tubing connections on both sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food


Nominal width

Material Max. temp.

Unit Price

mm mm °C piece EURO

29363 3 - 5 2 PP 135 10 45.0029364 3 - 5 2 PVDF 160 10 68.0029365 5 - 7 4 PP 135 10 51.0029366 5 - 7 4 PVDF 160 10 70.0029367 7 - 9 6 PP 135 10 60.0029368 7 - 9 6 PVDF 160 10 74.0029369 9 - 11 8 PP 135 10 61.0029370 9 - 11 8 PVDF 160 10 80.0029371 11 - 13 10 PP 135 10 62.0029372 11 - 13 10 PVDF 160 10 87.0029373 13 - 15 12 PP 135 10 64.0014274 13 - 15 12 PVDF 160 10 95.00

THOMAFLUID®-Elbow Barb Union made of PP/PVDF

Product specification• Tubing connections on both sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food


Nominal width

Material Max. temp.

Unit Price


60820 3 - 4 1.3 PP 121 10 22.0029376 3 - 5 2 PP 135 15 48.0029377 3 - 5 2 PVDF 160 15 60.0060821 4 - 5 2.5 PP 121 10 22.0029378 5 - 7 4 PP 135 15 48.0029379 5 - 7 4 PVDF 160 15 60.0060822 6 - 7 4.5 PP 121 10 22.0029380 7 - 9 6 PP 135 15 51.0029381 7 - 9 6 PVDF 160 15 66.0060823 8 - 9 6 PP 121 10 24.0029382 9 - 11 8 PP 135 15 57.0029383 9 - 11 8 PVDF 160 10 61.00




Nominal width

Material Max. temp.

Unit Price


60824 10 - 11 6 PP 121 10 32.0029384 11 - 13 10 PP 135 10 45.0029385 11 - 13 10 PVDF 160 10 70.0060825 12 - 13 10.5 PP 121 5 22.0029386 13 - 15 12 PP 135 10 58.0029387 13 - 15 12 PVDF 160 10 78.0060826 14 - 15 11.6 PP 121 5 26.00

THOMAFLUID®-T-Shaped Barb Union made of PP/PVDF

Product specification• Tubing connections on three sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food


Nominal width

Material Max. temp.

Unit Price


607971 3 1.6 PP 121 10 22.0029389 3 - 5 2 PP 135 15 48.0029390 3 - 5 2 PVDF 160 15 60.0060797 4 - 5 3.7 PP 121 10 22.0029391 5 - 7 4 PP 135 15 57.0029392 5 - 7 4 PVDF 160 15 63.0060798 6 - 7 4.4 PP 121 10 22.0029393 7 - 9 6 PP 135 10 45.0029394 7 - 9 6 PVDF 160 10 61.0060799 8 - 9 6.3 PP 121 10 24.0029395 9 - 11 8 PP 135 10 51.0029396 9 - 11 8 PVDF 160 10 62.0060800 10 - 11 8.2 PP 121 10 32.0029397 11 - 13 10 PP 135 10 54.0029398 11 - 13 10 PVDF 160 10 64.0060801 12 - 13 10 PP 121 10 22.0029399 13 - 15 12 PP 135 10 58.0029400 13 - 15 12 PVDF 160 10 70.0060802 14 - 15 12.1 PP 121 5 26.00

THOMAFLUID®-Y-Shaped Barb Union made of PP/PVDF

Product specification• Tubing connections at three sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food


Nominal width

Material Max. temp.

Unit Price


608031 3 2 PP 121 10 29.0029402 3 - 5 2 PP 135 10 45.0029403 3 - 5 2 PVDF 160 10 68.0060804 4 - 5 2.7 PP 121 10 33.0029404 5 - 7 4 PP 135 10 51.0029405 5 - 7 4 PVDF 160 10 70.0060805 6 - 7 4.6 PP 121 10 38.0029408 7 - 9 6 PP 135 10 61.0029409 7 - 9 6 PVDF 160 10 80.0060806 8 - 9 5.5 PP 121 10 43.0029410 9 - 11 8 PP 135 10 62.0029411 9 - 11 8 PVDF 160 10 87.0060807 10 - 11 7.9 PP 121 10 49.0029412 11 - 13 10 PP 135 10 64.0029413 11 - 13 10 PVDF 160 10 100.0060808 12 - 13 9.7 PP 121 5 25.0029414 13 - 15 12 PP 135 10 76.0029415 13 - 15 12 PVDF 160 10 116.0060809 14 - 15 11.9 PP 121 5 29.00

THOMAFLUID®-Cross Barb Union made of PP/PVDF

Product specification• Tubing connections at four sides• Autoclavable at +121 °C, 20 min.• Suitable for contact with food


Nominal width

Material Max. temp.

Unit Price

mm mm piece EURO

11796 3 - 5 2 PP 135 10 29.0070836 3 - 5 2 PVDF 160 10 40.0060837 5 - 7 4 PP 135 10 33.0070837 5 - 7 4 PVDF 160 10 45.0060838 7 - 9 6 PP 135 10 41.00




Nominal width

Material Max. temp.

Unit Price

mm mm piece EURO

70838 7 - 9 6 PVDF 160 10 57.0060839 9 - 11 8 PP 135 10 47.0070839 9 - 11 8 PVDF 160 10 66.0060840 11 - 13 10 PP 135 10 54.0070840 11 - 13 10 PVDF 160 10 75.0060841 13 - 15 12 PP 135 5 31.0070841 13 - 15 12 PVDF 160 5 43.00

THOMAFLUID®-Magic Box „Sammelsurium“ made of PP - 56 pieces

Product specification• In this 56-piece smorgasbord the right tubing connectors are almost

always to be found:2 universal tubing connectors for tubing of 4-17 mm; reducing adap-ters 4-8/8-12; 4-8/12-16; 8-12/12-16 à 2 pieces each; straight tubing connectors, elbow connectors, T-shaped pieces and Y-shaped pieces à 2 pieces each of the sizes: 4; 6; 8; 10; 12 and 14 mm.

• Shatterproof and transparent• UV-resistant

Technical specification• Material: PP (polypropylene)• Temperature range: -10 to +80 °C• Sterilization: autoclavable (+121 °C)


93051 1 98.00

THOMAFLUID®-Straight Barb Connectors with Male G-Thread made of PVDF

General product specification• Resistance to alcohols, aldehydes, petrol, benzene and other aromatic

hydrocarbons, chlorine gas, esters, glycols, motor oils, salt solutions, alkalis and acids

General technical specification• Material: PVDF (polyvinylidene fluoride)• Colour: transparent/white• Temperature range: -20 to +120 °C

THOMAFLUID®-Straight Barb Connector with Male Thread made of PVDF


Item For tubing

inside Ø

External thread

L l1 l2 WAF Unit Price

mm mm mm mm mm piece EURO

14707 4 G 1/4“ 29 8 17 14 3 24.0014708 6 G 1/4“ 29 8 17 14 3 27.0014709 6 G 3/8“ 39 9 22 17 3 30.0014710 9 G 3/8“ 39 9 22 17 3 30.0014711 13 G 3/8“ 42 9 25 17 3 33.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of PVDF - Bulkhead


Item For tubing

inside Ø

External thread

L l1 l2 Unit Price


14716 4 G 1/4“ 43 7 8 2 37.0014717 6 G 1/4“ 43 8 8 2 39.00

THOMAFLUID®-Connectors made of PP/PVDF/PTFE

Application area• Connection of tubing of the same diameter in areas of chemical and

physical laboratory technology, biotechnology, medical engineering, nuclear technology.

• For conveyance of ultrapure media and all kinds of aggressive and dangerous liquids and gases.



General product specification• Solvent and chemically resistant, non-leachable tubing connections,

non-slip fluted nozzles on both sides, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion, made of application-oriented, sterilizable high-performance polymer materials polytetrafluoroethylene (PTFE), polyvinylidene fluoride (PVDF) or polypropylene (PP).

• For elastic tubing with inside diameters of 4 to 12 mm.

General technical specification• PP (Polypropylene)

Extremely good impact toughness and notch impact strengthHigher hardness and stiffness as well as better resilience than PEThermoforming possibleVery good dielectrical propertiesGood resistance to alcohols, ketones, conc. acids and alkalisNot stable to aromatic hydrocarbons, fats and oils, halogenesAutoclavableResistant to hydrolysisPhysiologically safeColour: greyDensity: 0.90 g/cm3

Temperature range: +5 to +90 °CShore hardness D: 72°Max. operating pressure: 10 barWater absorption: 1013 OhmMelt flow index MFR: 0.3 g/10 min.

• PVDF (Polyvinylidene fluoride)High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceu-tical, food processing, paper and textile industry as well as in the nuclear technology.High impact toughness even at low temperaturesGood breakdown strengthLow dielectric loss factorHighest mechanical stability and stiffnessMeeting highest purity requirementsComply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualitiesOutstanding resistance to UV, weather and agingFlame-resistantHigh thermal stabilityResistant to alcohols, fats and oils, halogenes, alkalis, acidsNot stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acidColour: nature, slightly translucentDensity: 1.75 g/cm3

Temperature range: -40 to +140 °CShore hardness D: 79°Water absorption: 1013 OhmMelt flow index MFR: 6 g/10 min.

• PTFE (Polytetrafluoroethylene)Heavy-duty plasticAntiadhesive surfaceOutstanding sliding propertiesLowest friction coefficient of all fluorinated plasticsExcellent stress cracking resistance

Excellent weather resistanceHighest gas-tightnessNo water absorptionVery good dielectric properties independent of frequency and temperatureVery good electrical insulating capacity also at air humidityHigh tracking resistanceNon-combustibleColour: milky, whiteDensity: 2.20 g/cm3

Temperature range: -200 to +150 °CShore hardness D: 60°Max. operating pressure: 6 barTearing strength: 30 - 40 N/mm2

Elongation at break: 300 %Water absorption: 0.01 %Surface resistance: >1017 Ohm

THOMAFLUID®-Straight Barb Union made of PP/PVDF/PTFE

Product specification• Tubing connections, non-slip fluted nozzles on both sides, straight way,

construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion

Item For tubing inside Ø Material Unit Price mm piece EURO

47303 4 PTFE 3 27.0047304 4 PVDF 3 27.0047305 4 PP 10 59.0047306 6 PTFE 3 36.0047307 6 PVDF 3 36.0047308 6 PP 10 65.0047309 8 PTFE 3 39.0047310 8 PVDF 3 39.0047311 8 PP 10 77.0047312 10 PTFE 3 45.0047313 10 PVDF 3 45.0047314 10 PP 10 120.0047315 12 PTFE 2 54.0047316 12 PVDF 2 54.0047317 12 PP 6 85.00

THOMAFLUID®-T-Shaped Barb Union made of PP/PVDF/PTFE

Product specification• T-shaped tubing connections, orthogonally oriented, non-slip fluted

nozzles, non-restricted port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion



Item For tubing inside Ø Material Unit Price mm piece EURO

47384 4 PTFE 3 54.0047385 4 PVDF 3 54.0047386 4 PP 10 86.0047387 6 PTFE 3 78.0047388 6 PVDF 3 78.0047389 6 PP 10 134.0047390 8 PTFE 3 105.0047391 8 PVDF 3 105.0047392 8 PP 8 124.0047393 10 PTFE 2 93.0047394 10 PVDF 2 93.0047395 10 PP 6 120.0047396 12 PTFE 2 124.0047397 12 PVDF 2 124.0047398 12 PP 6 150.00

THOMAFLUID®-Straight Barb Connector with Male Thread made of PP/PVDF/PTFE

Product specification• Screw-in tubing connections, cylindrical male G- or NPT-thread in

commonly used inch sizes on one side, non-slip fluted hose nozzle on the other side, non-restricted port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion

G-threat NPT-threat

Item For tubing

inside Ø

External thread

Thread length

WAF Material Unit Price

mm mm mm piece EURO

47399 4 G 1/8“ 8 14 PTFE 3 30.0047400 6 G 1/8“ 8 14 PTFE 3 39.0047401 8 G 1/8“ 8 14 PTFE 3 39.0047540 10 G 1/8“ 8 14 PTFE 3 49.0047402 4 G 1/4“ 12 17 PTFE 3 39.0047403 6 G 1/4“ 12 17 PTFE 3 39.00

Item For tubing

inside Ø

External thread

Thread length


mm mm mm piece EURO

47404 8 G 1/4“ 12 17 PTFE 3 42.0047405 10 G 1/4“ 12 17 PTFE 3 51.0047406 12 G 1/4“ 12 17 PTFE 2 59.0047407 4 G 3/8“ 12 22 PTFE 3 33.0047408 6 G 3/8“ 12 22 PTFE 3 42.0047409 8 G 3/8“ 12 22 PTFE 3 45.0047410 10 G 3/8“ 12 22 PTFE 3 54.0047411 12 G 3/8“ 12 22 PTFE 2 80.0047412 4 G 1/2“ 14 27 PTFE 3 33.0047413 6 G 1/2“ 14 27 PTFE 3 42.0047414 8 G 1/2“ 14 27 PTFE 3 57.0047415 10 G 1/2“ 14 27 PTFE 3 66.0047416 12 G 1/2“ 14 27 PTFE 2 87.0047417 4 NPT 1/8“ 10 12 PTFE 3 30.0047418 6 NPT 1/8“ 10 12 PTFE 3 39.0047419 8 NPT 1/8“ 10 12 PTFE 3 42.0047420 4 NPT 1/4“ 15 17 PTFE 3 42.0047421 6 NPT 1/4“ 15 17 PTFE 3 42.0047422 8 NPT 1/4“ 15 17 PTFE 3 42.0047423 10 NPT 1/4“ 15 17 PTFE 3 51.0047424 12 NPT 1/4“ 15 17 PTFE 2 60.0047425 4 NPT 3/8“ 15 19 PTFE 3 33.0047426 6 NPT 3/8“ 15 19 PTFE 3 42.0047427 8 NPT 3/8“ 15 19 PTFE 3 45.0047428 10 NPT 3/8“ 15 19 PTFE 3 54.0047429 12 NPT 3/8“ 15 19 PTFE 2 80.0047430 4 NPT 1/2“ 20 24 PTFE 3 33.0047431 6 NPT 1/2“ 20 24 PTFE 3 42.0047432 8 NPT 1/2“ 20 24 PTFE 3 57.0047433 10 NPT 1/2“ 20 24 PTFE 3 66.0047434 12 NPT 1/2“ 20 24 PTFE 2 88.0047435 4 G 1/8“ 8 14 PVDF 3 30.0047436 6 G 1/8“ 8 14 PVDF 3 39.0047437 8 G 1/8“ 8 14 PVDF 3 39.0047541 10 G 1/8“ 8 14 PVDF 3 49.0047438 4 G 1/4“ 12 17 PVDF 3 39.0047439 6 G 1/4“ 12 17 PVDF 3 39.0047440 8 G 1/4“ 12 17 PVDF 3 42.0047441 10 G 1/4“ 12 17 PVDF 3 51.0047442 12 G 1/4“ 12 17 PVDF 2 60.0047443 4 G 3/8“ 12 22 PVDF 3 33.0047444 6 G 3/8“ 12 22 PVDF 3 42.0047445 8 G 3/8“ 12 22 PVDF 3 45.0047446 10 G 3/8“ 12 22 PVDF 3 54.0047447 12 G 3/8“ 12 22 PVDF 2 84.0047448 4 G 1/2“ 14 27 PVDF 3 33.0047449 6 G 1/2“ 14 27 PVDF 3 42.0047450 8 G 1/2“ 14 27 PVDF 3 57.0047451 10 G 1/2“ 14 27 PVDF 3 66.0047452 12 G 1/2“ 14 27 PVDF 2 87.0047453 4 NPT 1/8“ 10 12 PVDF 3 30.0047454 6 NPT 1/8“ 10 12 PVDF 3 39.0047455 8 NPT 1/8“ 10 12 PVDF 3 39.0047456 4 NPT 1/4“ 15 17 PVDF 3 39.00



Item For tubing

inside Ø

External thread

Thread length


mm mm mm piece EURO

47457 6 NPT 1/4“ 15 17 PVDF 3 39.0047458 8 NPT 1/4“ 15 17 PVDF 3 42.0047459 10 NPT 1/4“ 15 17 PVDF 3 51.0047460 12 NPT 1/4“ 15 17 PVDF 2 60.0047461 4 NPT 3/8“ 15 19 PVDF 3 33.0047462 6 NPT 3/8“ 15 19 PVDF 3 42.0047463 8 NPT 3/8“ 15 19 PVDF 3 45.0047464 10 NPT 3/8“ 15 19 PVDF 3 54.0047465 12 NPT 3/8“ 15 19 PVDF 2 84.0047466 4 NPT 1/2“ 20 24 PVDF 3 33.0047467 6 NPT 1/2“ 20 24 PVDF 3 42.0047468 8 NPT 1/2“ 20 24 PVDF 3 57.0047469 10 NPT 1/2“ 20 24 PVDF 3 66.0047470 12 NPT 1/2“ 20 24 PVDF 2 87.0047471 4 G 1/8“ 8 14 PP 10 36.0047472 6 G 1/8“ 8 14 PP 10 62.0047473 8 G 1/8“ 8 14 PP 10 85.0047542 10 G 1/8“ 8 14 PP 10 99.0047474 4 G 1/4“ 12 17 PP 10 39.0047475 6 G 1/4“ 12 17 PP 10 67.0047476 8 G 1/4“ 12 17 PP 10 87.0047477 10 G 1/4“ 12 17 PP 5 67.0047478 12 G 1/4“ 12 17 PP 5 97.0047479 4 G 3/8“ 12 22 PP 10 80.0047480 6 G 3/8“ 12 22 PP 10 90.0047481 8 G 3/8“ 12 22 PP 10 90.0047482 10 G 3/8“ 12 22 PP 5 57.0047483 12 G 3/8“ 12 22 PP 5 85.0047484 4 G 1/2“ 14 27 PP 10 82.0047485 6 G 1/2“ 14 27 PP 10 90.0047486 8 G 1/2“ 14 27 PP 10 95.0047487 10 G 1/2“ 14 27 PP 5 67.0047488 12 G 1/2“ 14 27 PP 5 90.0047489 4 NPT 1/8“ 10 12 PP 10 36.0047490 6 NPT 1/8“ 10 12 PP 10 62.0047491 8 NPT 1/8“ 10 12 PP 10 90.0047492 4 NPT 1/4“ 15 17 PP 10 39.0047493 6 NPT 1/4“ 15 17 PP 10 67.0047494 8 NPT 1/4“ 15 17 PP 10 87.0047495 10 NPT 1/4“ 15 17 PP 5 67.0047496 12 NPT 1/4“ 15 17 PP 5 97.0047497 4 NPT 3/8“ 15 19 PP 10 80.0047498 6 NPT 3/8“ 15 19 PP 10 90.0047499 8 NPT 3/8“ 15 19 PP 10 90.0047500 10 NPT 3/8“ 15 19 PP 5 60.0047501 12 NPT 3/8“ 15 19 PP 5 85.0047502 4 NPT 1/2“ 20 24 PP 10 90.0047503 6 NPT 1/2“ 20 24 PP 10 90.0047504 8 NPT 1/2“ 20 24 PP 10 100.0047505 10 NPT 1/2“ 20 24 PP 5 67.0047506 12 NPT 1/2“ 20 24 PP 5 90.00

THOMAFLUID®-Straight Barb Connector with Female Thread made of PP/PVDF/PTFE

Product specification• Screw-on tubing connections, cylindrical female G-thread in commonly

used inch sizes on one side, non-slip fluted hose nozzle on the other side, non-restricted port, construction in one piece without joints, mirror-smooth inner surfaces with low tendency to adhesion.


Internal thread

Material Unit Price

mm piece EURO

303508 4 G 1/8“ PTFE 3 33.00303509 6 G 1/8“ PTFE 3 42.00303510 8 G 1/8“ PTFE 3 42.00303511 10 G 1/8“ PTFE 3 54.00303512 4 G 1/4“ PTFE 3 36.00303513 6 G 1/4“ PTFE 3 42.00303514 8 G 1/4“ PTFE 3 45.00303515 10 G 1/4“ PTFE 3 54.00303516 12 G 1/4“ PTFE 2 45.00303517 4 G 3/8“ PTFE 3 36.00303518 6 G 3/8“ PTFE 3 45.00303519 8 G 3/8“ PTFE 3 48.00303520 10 G 3/8“ PTFE 3 60.00303521 12 G 3/8“ PTFE 2 66.00303522 4 G 1/2“ PTFE 3 36.00303523 6 G 1/2“ PTFE 3 48.00303524 8 G 1/2“ PTFE 3 63.00303525 10 G 1/2“ PTFE 3 75.00303526 12 G 1/2“ PTFE 2 92.00303527 4 G 1/8“ PVDF 3 33.00303528 6 G 1/8“ PVDF 3 42.00303529 8 G 1/8“ PVDF 3 42.00303530 10 G 1/8“ PVDF 3 54.00303531 4 G 1/4“ PVDF 3 36.00303532 6 G 1/4“ PVDF 3 42.00303533 8 G 1/4“ PVDF 3 45.00303534 10 G 1/4“ PVDF 3 54.00303535 12 G 1/4“ PVDF 2 45.00303536 4 G 3/8“ PVDF 3 36.00303537 6 G 3/8“ PVDF 3 45.00303538 8 G 3/8“ PVDF 3 48.00303539 10 G 3/8“ PVDF 3 60.00303540 12 G 3/8“ PVDF 2 66.00303541 4 G 1/2“ PVDF 3 36.00303542 6 G 1/2“ PVDF 3 48.00303543 8 G 1/2“ PVDF 3 63.00303544 10 G 1/2“ PVDF 3 75.00




Internal thread

Material Unit Price

mm piece EURO

303545 12 G 1/2“ PVDF 2 92.00303546 4 G 1/8“ PP 10 45.00303547 6 G 1/8“ PP 10 53.00303548 8 G 1/8“ PP 10 60.00303549 10 G 1/8“ PP 5 50.00303550 4 G 1/4“ PP 10 47.00303551 6 G 1/4“ PP 10 55.00303552 8 G 1/4“ PP 10 63.00303553 10 G 1/4“ PP 5 55.00303554 12 G 1/4“ PP 5 75.00303555 4 G 3/8“ PP 10 84.00303556 6 G 3/8“ PP 10 75.00303557 8 G 3/8“ PP 10 79.00303558 10 G 3/8“ PP 5 55.00303559 12 G 3/8“ PP 5 80.00303560 4 G 1/2“ PP 10 74.00303561 6 G 1/2“ PP 10 82.00303562 8 G 1/2“ PP 10 85.00303563 10 G 1/2“ PP 5 60.00303564 12 G 1/2“ PP 5 85.00

THOMAFLUID®-Elbow Barb Connector with Male Thread made of PP/PVDF/PTFE

Product specification• Screw-in tubing connections, cylindrical male G- or NPT-thread in

commonly used inch sizes on one side, non-slip fluted hose nozzle on the other side, non-restricted rectangular port, construction in one piece wit-hout joints, mirror-smooth inner surfaces with low tendency to adhesion

Item For tubing

inside Ø

External thread

Thread length

Material Unit Price

mm mm piece EURO

47543 4 G 1/8“ 8 PTFE 3 42.0047544 6 G 1/8“ 8 PTFE 3 48.0047545 8 G 1/8“ 8 PTFE 3 78.0047546 4 G 1/4“ 12 PTFE 3 45.0047547 6 G 1/4“ 12 PTFE 3 63.0047548 8 G 1/4“ 12 PTFE 3 84.0047549 10 G 1/4“ 12 PTFE 2 84.0047550 12 G 1/4“ 12 PTFE 1 57.0047551 4 G 3/8“ 12 PTFE 3 63.0047552 6 G 3/8“ 12 PTFE 3 75.0047553 8 G 3/8“ 12 PTFE 3 93.00

Item For tubing

inside Ø

External thread

Thread length

Material Unit Price

mm mm piece EURO

47554 10 G 3/8“ 12 PTFE 2 92.0047555 12 G 3/8“ 12 PTFE 1 59.0047556 4 G 1/2“ 14 PTFE 3 93.0047557 6 G 1/2“ 14 PTFE 3 99.0047558 8 G 1/2“ 14 PTFE 2 80.0047559 10 G 1/2“ 14 PTFE 2 104.0047560 12 G 1/2“ 14 PTFE 1 65.0047561 4 NPT 1/8“ 10 PTFE 3 42.0047562 6 NPT 1/8“ 10 PTFE 3 48.0047563 8 NPT 1/8“ 10 PTFE 3 78.0047564 4 NPT 1/4“ 15 PTFE 3 45.0047565 6 NPT 1/4“ 15 PTFE 3 63.0047566 8 NPT 1/4“ 15 PTFE 3 84.0047567 10 NPT 1/4“ 15 PTFE 2 84.0047568 12 NPT 1/4“ 15 PTFE 1 57.0047569 4 NPT 3/8“ 15 PTFE 3 63.0047570 6 NPT 3/8“ 15 PTFE 3 75.0047571 8 NPT 3/8“ 15 PTFE 3 93.0047572 10 NPT 3/8“ 15 PTFE 2 92.0047573 12 NPT 3/8“ 15 PTFE 1 59.0047574 4 NPT 1/2“ 20 PTFE 3 93.0047575 6 NPT 1/2“ 20 PTFE 3 99.0047576 8 NPT 1/2“ 20 PTFE 2 80.0047577 10 NPT 1/2“ 20 PTFE 2 104.0047578 12 NPT 1/2“ 20 PTFE 1 65.0047579 4 G 1/8“ 8 PVDF 3 42.0047580 6 G 1/8“ 8 PVDF 3 48.0047581 8 G 1/8“ 8 PVDF 3 78.0047582 4 G 1/4“ 12 PVDF 3 48.0047583 6 G 1/4“ 12 PVDF 3 63.0047584 8 G 1/4“ 12 PVDF 3 84.0047585 10 G 1/4“ 12 PVDF 2 84.0047586 12 G 1/4“ 12 PVDF 1 57.0047587 4 G 3/8“ 12 PVDF 3 63.0047588 6 G 3/8“ 12 PVDF 3 75.0047589 8 G 3/8“ 12 PVDF 3 93.0047590 10 G 3/8“ 12 PVDF 2 92.0047591 12 G 3/8“ 12 PVDF 1 59.0047592 4 G 1/2“ 14 PVDF 3 93.0047593 6 G 1/2“ 14 PVDF 3 99.0047594 8 G 1/2“ 14 PVDF 2 80.0047595 10 G 1/2“ 14 PVDF 2 104.0047596 12 G 1/2“ 14 PVDF 1 65.0047597 4 NPT 1/8“ 10 PVDF 3 42.0047598 6 NPT 1/8“ 10 PVDF 3 48.0047599 8 NPT 1/8“ 10 PVDF 3 78.0047600 4 NPT 1/4“ 15 PVDF 3 45.0047601 6 NPT 1/4“ 15 PVDF 3 63.0047602 8 NPT 1/4“ 15 PVDF 3 84.0047603 10 NPT 1/4“ 15 PVDF 2 84.0047604 12 NPT 1/4“ 15 PVDF 1 57.0047605 4 NPT 3/8“ 15 PVDF 3 63.0047606 6 NPT 3/8“ 15 PVDF 3 75.0047607 8 NPT 3/8“ 15 PVDF 3 93.00



Item For tubing

inside Ø

External thread

Thread length

Material Unit Price

mm mm piece EURO

47608 10 NPT 3/8“ 15 PVDF 2 92.0047609 12 NPT 3/8“ 15 PVDF 1 59.0047610 4 NPT 1/2“ 20 PVDF 3 93.0047611 6 NPT 1/2“ 20 PVDF 3 99.0047612 8 NPT 1/2“ 20 PVDF 2 80.0047613 10 NPT 1/2“ 20 PVDF 2 104.0047614 12 NPT 1/2“ 20 PVDF 1 65.0047615 4 G 1/8“ 8 PP 5 57.0047616 6 G 1/8“ 8 PP 5 70.0047617 8 G 1/8“ 8 PP 5 90.0047618 4 G 1/4“ 12 PP 5 55.0047619 6 G 1/4“ 12 PP 5 67.0047620 8 G 1/4“ 12 PP 5 87.0047621 10 G 1/4“ 12 PP 5 95.0047622 12 G 1/4“ 12 PP 5 120.0047623 4 G 3/8“ 12 PP 5 55.0047624 6 G 3/8“ 12 PP 5 57.0047625 8 G 3/8“ 12 PP 5 67.0047626 10 G 3/8“ 12 PP 5 97.0047627 12 G 3/8“ 12 PP 5 126.0047628 4 G 1/2“ 14 PP 5 70.0047629 6 G 1/2“ 14 PP 5 75.0047630 8 G 1/2“ 14 PP 5 85.0047631 10 G 1/2“ 14 PP 5 110.0047632 12 G 1/2“ 14 PP 5 145.0047633 4 NPT 1/8“ 10 PP 5 57.0047634 6 NPT 1/8“ 10 PP 5 70.0047635 8 NPT 1/8“ 10 PP 5 90.0047636 4 NPT 1/4“ 15 PP 5 52.0047637 6 NPT 1/4“ 15 PP 5 70.0047638 8 NPT 1/4“ 15 PP 5 90.0047639 10 NPT 1/4“ 15 PP 5 95.0047640 12 NPT 1/4“ 15 PP 5 120.0047641 4 NPT 3/8“ 15 PP 5 55.0047642 6 NPT 3/8“ 15 PP 5 60.0047643 8 NPT 3/8“ 15 PP 5 70.0047644 10 NPT 3/8“ 15 PP 5 100.0047645 12 NPT 3/8“ 15 PP 5 130.0047646 4 NPT 1/2“ 20 PP 5 70.0047647 6 NPT 1/2“ 20 PP 5 75.0047648 8 NPT 1/2“ 20 PP 5 85.0047649 10 NPT 1/2“ 20 PP 5 110.0047650 12 NPT 1/2“ 20 PP 5 145.00

THOMAFLUID®-Water Flow Regulating Adapter

Product specification• Stabilizer of inconstant water pressure.• The indispensable helper for every lab. If a constant water flow from

the water-supply line is required, the THOMAFLUID®-water regulating adapter is needed.

• It is required for metering of constant water volumes in thermostats and distillation condensers or for liquid level control of water bathes. In contrast to conventional metal connections, the THOMAFLUID®-water regulating adapter offers following advantages:

• Very simple regulation of the flow valve from outside; no calcification of the adapter; simplest installation at the cock directly, no mainte-nance; no rusting, no greasing; constant and stable water flow when the cock is fully opened; constant water flow rate guaranteed; no coming off of the tube from cock due to overpressure; highest safety. The THOMAFLUID®-water regulating adapter is designed in such a way that water flow is only regulated but never shut off when the check valve is turned. To turn off the water, the cock has to be shut off.

Item For tubing inside Ø Internal thread Unit Price inch piece EURO

95418 1/2“ R 1/2“ 1 98.00954183 1/2“ R 1/2“ 3 235.00

THOMAFLUID®-Connectors made of PP (glass fibre reinforced) - macro

General technical specification• Housing: light-grey, made of glass fibre reinforced PP (polypropylene)• Max. operating pressure: 10 bar at +20 °C• Temperature range: 0 to +80 °C• Sterilization: autoclavable at +121 °C

THOMAFLUID®-Straight Barb Connector with Male Thread made of PP - macro

Product specification• Hose Nozzle with cylindrical male G-thread

Item For tubing

inside Ø

External thread

d L WAF (SW)

Unit Price


14297 13 G 1/2“ 8.5 55 21 10 36.0014298 16 G 1/2“ 10.5 63 21 10 36.0014299 20 G 1/2“ 15 63.5 24 10 39.0014300 16 G 3/4“ 10.5 46 21 10 41.0014301 12 G 3/4“ 7.5 56 19 10 44.0014302 20 G 3/4“ 15 64 24 10 46.0014303 22 G 1“ 17 69.5 30 10 49.00



THOMAFLUID®-Straight Barb Connector with Female Thread made of PP - macro

Product specification• Hose Nozzle with cylindrical female G-thread with loose cap nut


Internal thread

d L Unit Price

mm mm mm piece EURO

14304 13 G 1/2“ 9 52 5 34.0014305 16 G 1/2“ 10 61 5 34.0014306 16 G 3/4“ 10 63 5 36.0014307 12 G 3/4“ 7.5 54 5 39.0014308 20 G 3/4“ 13 64 5 41.0014309 25 G 1“ 20 69 5 44.00

THOMAFLUID®-Elbow Barb Connector with Male Thread made of PP - macro

Product specification• Angle hose nozzle with cylindrical male G-thread


External thread

d WAF (SW)

Unit Price

mm mm mm piece EURO

14310 12 G 1/2“ 7.5 19 5 34.0014311 16 G 1/2“ 11 19 5 34.0014312 20 G 1/2“ 15.5 24 5 39.0014313 12 G 3/4“ 7.5 19 5 39.0014314 22 G 3/4“ 17 30 5 39.0014315 22 G 1“ 17 30 5 44.00

THOMAFLUID®-Elbow Barb Connector with Female Thread made of PP - macro

Product specification• Angle hose nozzle with cylindrical female G-thread


Internal thread

d WAF Unit Price

mm mm mm piece EURO

14316 12 G 1/2“ 7.5 11 5 44.0014317 16 G 3/4“ 11 7 5 49.0014318 12 G 3/4“ 7.5 12 5 49.0014319 20 G 3/4“ 15.7 8 5 52.0014320 22 G 1“ 17 9 5 54.00

RCT®-Accessories: Hexagon Lock Nut made of PE

Item Internal thread WAF Unit Price mm piece EURO

14332 G 1/2“ 27 10 36.0014333 G 3/4“ 36 10 41.0014334 G 1“ 46 10 54.00

RCT®-Accessories: Flat Gasket made of PE

Item Suitable for Unit Price piece EURO

14326 internal thread R 1/2“ 5 29.0014327 internal thread R 3/4“ 5 34.0014328 internal thread R 1“ 5 54.0014329 external thread R 1/2“ 5 29.0014330 external thread R 3/4“ 5 34.0014331 external thread R 1“ 5 54.00


Fittings - Screw Joints for Tubings (1.6 - 12 mm) One-Piece Connectors - Plastics

Screw Joints for Tubings (I-Ø: 1.6 - 12 mm)

THOMAFLUID®-Screw Joints for Tubings

General product specification• THOMAFLUID®-tubing screw joints are used for connecting flexible

THOMAFLUID®-tubing.• The connecting spigot is nearly cylindrical and dimensioned in such a

way that dilatation of the tubing does not exceed 6 % (referring to the tubing outside diameter) even with unfavourable tolerances.

• The tension of the remaining dilatation achieves tightness of the screw joint also without knurled nut (checked up to 6 bar).

• The locking ring of the screw joints causes the arrestment of the tubing thus preventing effects of shear and torsion forces. Please note that of course the locking ring has to be left in place if the screw joint should be closed by a cover cap.

• The elastic locking ring can be used repeatedly within the same screw joint, which means that the screw joint can be opened and tightly closed again using the same locking ring.

• The locking ring is fitted with a flange serving as a stop. The tube can be pressed only to the point where the flange of the locking ring abuts to the body of the screw joint which causes an additional safety effect.

• This safety effect is given by the fact that the screw joint remains tight even when the connecting spigot is teared off or heavily damaged by any impact. This tightness is caused by the knurled nut pressing in the locking ring into the cone of the screw joint thus producing a seal in the cone. The connecting spigot functions as a carrying bracket, and a carrying bracket has not necessarily to be a fixed component part of the screw joint body.

General technical specification• PP (Polypropylene)

Extremely good impact toughness and notch impact strengthHigher hardness and stiffness as well as better resilience than PEThermoforming possible, very good dielectrical propertiesGood resistance to alcohols, ketones, conc. acids and alkalisNot stable to aromatic hydrocarbons, fats and oils, halogenesAutoclavableResistant to hydrolysisPhysiologically safeColour: greyDensity: 0.90 g/cm3

Temperature range: +5 to +90 °CShore hardness D: 72°Max. operating pressure: 10 barWater absorption: 1013 OhmMelt flow index MFR: 0.3 g/10 min.

• PVDF (Polyvinylidene fluoride)High-quality technical plastic for chemical apparatus and machine building, especially in the petrochemical, metallurgical, pharmaceu-tical, food processing, paper and textile industry as well as in the nuclear technology.High impact toughness even at low temperaturesGood breakdown strengthLow dielectric loss factorHighest mechanical stability and stiffnessMeeting highest purity requirementsComply with the guidelines from FDA and USP class VI, additionally PVDF has the KTW approval. Up to +150 °C it is non-toxic and since it has a similar property to glass it is a no-culture medium for microorganisms.

Can be treated by autoclave (absolute sterile) and sterilized with gamma-rays without losing its mechanical qualitiesOutstanding resistance to UV, weather and agingFlame-resistantHigh thermal stabilityResistant to alcohols, fats and oils, halogenes, alkalis, acidsNot stable to aromatic hydrocarbons, ketones, amines, pyridine, dimethylformamide, hot alkalis, fuming sulfuric acidColour: nature, slightly translucentDensity: 1.75 g/cm3

Temperature range: -40 to +140 °CShore hardness D: 79°Water absorption: 1013 OhmMelt flow index MFR: 6 g/10 min.

EMP-3 tubing connection principle

THOMAFLUID®-Straight Connector made of PP/PVDF

Product specification• Straight, tubing connection on both sides

Item NW L WAF Material Unit Price mm mm mm piece EURO

20025 4/6 39 14 PP 10 52.0020026 4/6 39 14 PVDF 5 82.0020028 6/8 47 19 PP 10 69.0020029 6/8 47 19 PVDF 5 101.0020031 6/10 53 22 PP 10 75.0020032 6/10 53 22 PVDF 5 101.0020034 8/10 53 19 PP 10 86.0020035 8/10 53 19 PVDF 5 126.0020037 8/12 58 24 PP 10 151.0020038 8/12 58 24 PVDF 5 151.0020040 10/14 62 24 PP 5 120.0020041 10/14 62 24 PVDF 5 160.00



THOMAFLUID®-Straight Connector made of PP/PVDF - Bulkhead

Product specification• Straight, tubing connection on both sides, control panel mounting

Item NW l L1 WAF Material Unit Price mm mm mm mm piece EURO

20061 4/6 9 53 14 PP 10 62.0020062 4/6 9 53 14 PVDF 5 95.0020064 6/8 9 64 19 PP 10 79.0020065 6/8 9 64 19 PVDF 5 141.0020067 6/10 10 73 22 PP 10 100.0020068 6/10 10 73 22 PVDF 5 151.0020070 8/10 10 73 22 PP 10 102.0020071 8/10 10 73 22 PVDF 5 151.0020073 8/12 12 84 24 PP 10 172.0020074 8/12 12 84 24 PVDF 5 182.0020076 10/14 14 98 27 PP 5 150.0020077 10/14 14 98 27 PVDF 5 205.00

THOMAFLUID®-Straight Connector (reducing) made of PP/PVDF

Product specification• Straight, tubing connection (A) on one side; pipe connection (B) on the

other side

Item NW For pipes outside Ø

L WAF (SW)

Material Unit Price


20043 4/6 6 42 17 PP 10 62.0020044 4/6 6 42 17 PVDF 5 150.0020046 6/8 8 47 19 PP 10 79.0020047 6/8 8 47 19 PVDF 5 163.0020049 6/10 8 52 22 PP 10 100.0020050 6/10 8 52 22 PVDF 5 184.0020052 8/10 10 52 22 PP 10 133.00


L WAF (SW)

Material Unit Price


20053 8/10 10 52 22 PVDF 5 184.0020055 8/12 12 56 24 PP 10 160.0020056 8/12 12 56 24 PVDF 5 194.0020058 10/14 14 59 27 PP 10 160.0020059 10/14 14 59 27 PVDF 5 202.00

THOMAFLUID®-Straight Tube/Pipe Connector (reducing) made of PP/PVDF - Bulkhead

Product specification• Straight, tubing connection (A) on one side; pipe connection (B) on the

other side, control panel mounting


L1 WAF (SW)

Material Unit Price


20081 4/6 6 64 17 PP 10 82.0020082 4/6 6 64 17 PVDF 5 159.0060570 4/6 8 56 17 PA 3 48.0020084 6/8 8 70 19 PP 10 120.0020085 6/8 8 70 19 PVDF 5 197.0020087 6/10 8 78 22 PP 10 190.0020088 6/10 8 78 22 PVDF 5 197.0020090 8/10 10 78 22 PP 10 190.0020091 8/10 10 78 22 PVDF 3 129.0020093 8/12 12 89 24 PP 5 130.0020094 8/12 12 89 24 PVDF 3 144.0020096 10/14 14 98 27 PP 5 132.0020097 10/14 14 98 27 PVDF 3 168.00

THOMAFLUID®-Straight Connector with Male Thread made of PP/PVDF - short



Product specification• Straight, tubing connection on one side; male G-, NPT- or M-thread on

the other side

Item NW External thread

l1 WAF Material Unit Price

mm mm mm piece EURO

20171 4/6 NPT 1/8“ 10 12 PP 10 36.0020172 4/6 NPT 1/8“ 10 12 PVDF 5 82.0020174 4/6 NPT 1/4“ 15 17 PP 10 54.0020175 4/6 NPT 1/4“ 15 17 PVDF 5 90.0020177 4/6 NPT 3/8“ 15 19 PP 10 99.0020178 4/6 NPT 3/8“ 15 19 PVDF 5 91.0020180 4/6 NPT 1/2“ 20 24 PP 10 106.0020181 4/6 NPT 1/2“ 20 24 PVDF 5 93.0020183 6/8 NPT 1/8“ 10 14 PP 10 113.0020184 6/8 NPT 1/8“ 10 14 PVDF 5 95.0020186 6/8 NPT 1/4“ 15 17 PP 10 113.0020187 6/8 NPT 1/4“ 15 17 PVDF 5 95.0020189 6/8 NPT 3/8“ 15 19 PP 10 113.0020190 6/8 NPT 3/8“ 15 19 PVDF 5 99.0020192 6/8 NPT 1/2“ 20 24 PP 10 115.0020193 6/8 NPT 1/2“ 20 24 PVDF 5 102.0020195 6/10 NPT 1/8“ 10 19 PP 10 120.0020196 6/10 NPT 1/8“ 10 19 PVDF 5 104.0020198 6/10 NPT 1/4“ 15 19 PP 10 116.0020199 6/10 NPT 1/4“ 15 19 PVDF 5 104.0020201 6/10 NPT 3/8“ 15 19 PP 10 120.0020202 6/10 NPT 3/8“ 15 19 PVDF 5 104.0020204 6/10 NPT 1/2“ 20 24 PP 10 130.0020205 6/10 NPT 1/2“ 20 24 PVDF 5 110.0020207 8/10 NPT 1/8“ 10 19 PP 10 104.0020208 8/10 NPT 1/8“ 10 19 PVDF 5 109.0020210 8/10 NPT 1/4“ 15 19 PP 10 109.0020211 8/10 NPT 1/4“ 15 19 PVDF 5 104.0020213 8/10 NPT 3/8“ 15 19 PP 10 115.0020214 8/10 NPT 3/8“ 15 19 PVDF 5 106.0020216 8/10 NPT 1/2“ 20 24 PP 10 120.0020217 8/10 NPT 1/2“ 20 24 PVDF 5 123.0020219 8/12 NPT 1/8“ 10 22 PP 10 130.0020220 8/12 NPT 1/8“ 10 22 PVDF 5 126.0020222 8/12 NPT 1/4“ 15 22 PP 10 136.0020223 8/12 NPT 1/4“ 15 22 PVDF 5 131.0020225 8/12 NPT 3/8“ 15 22 PP 10 150.0020226 8/12 NPT 3/8“ 15 22 PVDF 5 133.0020228 8/12 NPT 1/2“ 20 24 PP 10 152.0020229 8/12 NPT 1/2“ 20 24 PVDF 5 148.0020231 10/14 NPT 1/8“ 10 22 PP 10 180.0020232 10/14 NPT 1/8“ 10 22 PVDF 5 155.0020234 10/14 NPT 1/4“ 15 22 PP 10 178.0020235 10/14 NPT 1/4“ 15 22 PVDF 5 157.0020237 10/14 NPT 3/8“ 15 22 PP 10 184.0020238 10/14 NPT 3/8“ 15 22 PVDF 5 157.0020240 10/14 NPT 1/2“ 20 24 PP 10 197.0020241 10/14 NPT 1/2“ 20 24 PVDF 5 163.0020243 4/6 G 1/8“ 8 14 PP 10 41.0020244 4/6 G 1/8“ 8 14 PVDF 5 85.0020246 4/6 G 1/4“ 12 17 PP 10 46.0020247 4/6 G 1/4“ 12 17 PVDF 5 100.00



mm mm mm piece EURO

20249 4/6 G 3/8“ 12 22 PP 10 107.0020250 4/6 G 3/8“ 12 22 PVDF 5 93.0020252 4/6 G 1/2“ 14 27 PP 10 116.0020253 4/6 G 1/2“ 14 27 PVDF 5 104.0020255 6/8 G 1/8“ 8 14 PP 10 116.0020256 6/8 G 1/8“ 8 14 PVDF 5 104.0020258 6/8 G 1/4“ 12 17 PP 10 116.0020259 6/8 G 1/4“ 12 17 PVDF 5 109.0020261 6/8 G 3/8“ 12 22 PP 10 116.0020262 6/8 G 3/8“ 12 22 PVDF 5 120.0020264 6/8 G 1/2“ 14 27 PP 10 126.0020265 6/8 G 1/2“ 14 27 PVDF 5 121.0020267 6/10 G 1/8“ 8 19 PP 10 126.0020268 6/10 G 1/8“ 8 19 PVDF 5 121.0020270 6/10 G 1/4“ 12 19 PP 10 126.0020271 6/10 G 1/4“ 12 19 PVDF 5 121.0020273 6/10 G 3/8“ 12 22 PP 10 126.0020274 6/10 G 3/8“ 12 22 PVDF 5 121.0020276 6/10 G 1/2“ 14 27 PP 10 133.0020277 6/10 G 1/2“ 14 27 PVDF 5 132.0020279 8/10 G 1/8“ 8 19 PP 10 133.0020280 8/10 G 1/8“ 8 19 PVDF 5 132.0020282 8/10 G 1/4“ 12 19 PP 10 133.0020283 8/10 G 1/4“ 12 19 PVDF 5 132.0020285 8/10 G 3/8“ 12 22 PP 10 133.0020286 8/10 G 3/8“ 12 22 PVDF 5 132.0020288 8/10 G 1/2“ 14 27 PP 10 133.0020289 8/10 G 1/2“ 14 27 PVDF 5 132.0020291 8/12 G 1/8“ 8 22 PP 10 145.0020292 8/12 G 1/8“ 8 22 PVDF 5 134.0020294 8/12 G 1/4“ 12 22 PP 10 164.0020295 8/12 G 1/4“ 12 22 PVDF 5 139.0020297 8/12 G 3/8“ 12 22 PP 10 164.0020298 8/12 G 3/8“ 12 22 PVDF 5 148.0020300 8/12 G 1/2“ 14 27 PP 10 187.0020301 8/12 G 1/2“ 14 27 PVDF 5 172.0020303 10/14 G 1/8“ 8 22 PP 10 202.0020304 10/14 G 1/8“ 8 22 PVDF 5 176.0020306 10/14 G 1/4“ 12 22 PP 10 229.0020307 10/14 G 1/4“ 12 22 PVDF 5 183.0020309 10/14 G 3/8“ 12 22 PP 10 238.0020310 10/14 G 3/8“ 12 22 PVDF 3 171.0020312 10/14 G 1/2“ 14 27 PP 10 246.0020313 10/14 G 1/2“ 14 27 PVDF 3 198.0020152 4/6 M5 x 0.8 6 12 PP 10 on req.20155 4/6 M5 x 0.8 6 12 PVDF 5 on req.20158 4/6 M6 x 1 6 12 PP 10 on req.20161 4/6 M6 x 1 6 12 PVDF 5 on req.20164 4/6 M8 x 1.25 8 14 PP 10 on req.20167 4/6 M8 x 1.25 8 14 PVDF 5 on req.20099 4/6 M10 x 1.5 8 14 PP 10 on req.20100 4/6 M10 x 1.5 8 14 PVDF 5 on req.20102 4/6 M12 x 1.5 12 17 PP 10 on req.20103 4/6 M12 x 1.5 12 17 PVDF 5 on req.20105 4/6 M16 x 1.5 12 22 PP 10 on req.





mm mm mm piece EURO

20106 4/6 M16 x 1.5 12 22 PVDF 5 on req.20108 4/6 M18 x 1.5 12 24 PP 10 on req.20109 4/6 M18 x 1.5 12 24 PVDF 5 on req.20111 6/8 M10 x 1.5 8 14 PP 10 on req.20112 6/8 M10 x 1.5 8 14 PVDF 5 on req.20114 6/8 M12 x 1.5 12 17 PP 10 on req.20115 6/8 M12 x 1.5 12 17 PVDF 5 on req.20117 6/8 M16 x 1.5 12 22 PP 10 on req.20118 6/8 M16 x 1.5 12 22 PVDF 2 on req.20120 6/8 M18 x 1.5 12 24 PP 10 on req.20121 6/8 M18 x 1.5 12 24 PVDF 2 on req.20123 6/10 M10 x 1.5 8 14 PP 10 on req.20124 6/10 M10 x 1.5 8 14 PVDF 2 on req.20126 6/10 M12 x 1.5 12 17 PP 10 on req.20127 6/10 M12 x 1.5 12 17 PVDF 5 on req.20129 6/10 M16 x 1.5 12 22 PP 10 on req.20130 6/10 M16 x 1.5 12 22 PVDF 2 on req.20132 6/10 M18 x 1.5 12 24 PP 10 on req.20133 6/10 M18 x 1.5 12 24 PVDF 2 on req.20135 8/10 M10 x 1.5 8 14 PP 10 on req.20136 8/10 M10 x 1.5 8 14 PVDF 2 on req.20138 8/10 M12 x 1.5 12 17 PP 10 on req.20139 8/10 M12 x 1.5 12 17 PVDF 2 on req.20141 8/10 M16 x 1.5 12 22 PP 10 on req.20142 8/10 M16 x 1.5 12 22 PVDF 2 on req.20144 8/10 M18 x 1.5 12 24 PP 10 on req.20145 8/10 M18 x 1.5 12 24 PVDF 2 on req.20147 8/12 M12 x 1.5 8 14 PP 10 on req.20148 8/12 M12 x 1.5 8 14 PVDF 2 on req.20150 8/12 M14 x 1.5 12 17 PP 10 on req.20151 8/12 M14 x 1.5 12 17 PVDF 2 on req.20153 8/12 M16 x 1.5 12 22 PP 10 on req.20154 8/12 M16 x 1.5 12 22 PVDF 2 on req.20156 8/12 M18 x 1.5 12 24 PP 10 on req.20157 8/12 M18 x 1.5 12 24 PVDF 2 on req.20159 10/14 M12 x 1.5 8 14 PP 10 on req.20160 10/14 M12 x 1.5 8 14 PVDF 2 on req.20162 10/14 M14 x 1.5 12 17 PP 10 on req.20163 10/14 M14 x 1.5 12 17 PVDF 2 on req.20165 10/14 M16 x 1.5 12 22 PP 10 on req.20166 10/14 M16 x 1.5 12 22 PVDF 3 on req.20168 10/14 M18 x 1.5 12 24 PP 10 on req.20169 10/14 M18 x 1.5 12 24 PVDF 2 on req.

THOMAFLUID®-Straight Connector with Male Thread made of PP/PVDF - long

Product specification• Straight, tubing connection on one side; male G-thread on the other

side; long model


l1 L1 Material Unit Price

mm mm mm piece EURO

20369 4/6 G 1/8“ 8 39 PP 10 79.0020370 4/6 G 1/8“ 8 39 PVDF 5 109.0020372 4/6 G 1/4“ 12 41 PP 10 74.0020373 4/6 G 1/4“ 12 41 PVDF 5 103.0020375 4/6 G 3/8“ 12 43 PP 10 93.0020376 4/6 G 3/8“ 12 43 PVDF 5 115.0020378 4/6 G 1/2“ 14 46 PP 10 123.0020379 4/6 G 1/2“ 14 46 PVDF 5 119.0020381 6/8 G 1/8“ 8 44 PP 10 130.0020382 6/8 G 1/8“ 8 44 PVDF 5 125.0020384 6/8 G 1/4“ 12 45 PP 10 119.0020385 6/8 G 1/4“ 12 45 PVDF 5 122.0020387 6/8 G 3/8“ 12 47 PP 10 116.0020388 6/8 G 3/8“ 12 47 PVDF 5 123.0020390 6/8 G 1/2“ 14 50 PP 10 132.0020391 6/8 G 1/2“ 14 50 PVDF 5 127.00

THOMAFLUID®-Straight Connector with Male Thread made of PP/PVDF - Bulkhead

Product specification• Straight, tubing connection on one side; male G-thread on the other side



mm mm mm piece EURO

20315 4/6 G 1/4“ 12 37 PP 10 79.0020316 4/6 G 1/4“ 12 37 PVDF 5 109.0020318 4/6 G 3/8“ 12 41 PP 10 120.0020319 4/6 G 3/8“ 12 41 PVDF 5 121.0020321 4/6 G 1/2“ 14 43 PP 10 127.0020322 4/6 G 1/2“ 14 43 PVDF 5 125.0020324 6/8 G 1/4“ 12 45 PP 10 127.0020325 6/8 G 1/4“ 12 45 PVDF 5 126.00





mm mm mm piece EURO

20327 6/8 G 3/8“ 12 46 PP 10 130.0020328 6/8 G 3/8“ 12 46 PVDF 5 127.0020330 6/8 G 1/2“ 14 48 PP 10 140.0020331 6/8 G 1/2“ 14 48 PVDF 5 130.0020332 6/10 G 1/4“ 12 50 PP 10 130.0020334 6/10 G 1/4“ 12 50 PVDF 5 130.0020335 6/10 G 3/8“ 12 51 PP 10 125.0020337 6/10 G 3/8“ 12 51 PVDF 5 135.0020339 6/10 G 1/2“ 14 53 PP 10 136.0020340 6/10 G 1/2“ 14 53 PVDF 5 135.0020342 8/10 G 1/4“ 12 50 PP 10 140.0020343 8/10 G 1/4“ 12 50 PVDF 5 136.0020345 8/10 G 3/8“ 12 51 PP 10 140.0020346 8/10 G 3/8“ 12 51 PVDF 5 140.0020348 8/10 G 1/2“ 14 53 PP 10 150.0020349 8/10 G 1/2“ 14 53 PVDF 5 155.0020351 8/12 G 1/4“ 12 58 PP 10 170.0020352 8/12 G 1/4“ 12 58 PVDF 5 140.0020354 8/12 G 3/8“ 12 59 PP 10 180.0020355 8/12 G 3/8“ 12 59 PVDF 5 170.0020357 8/12 G 1/2“ 14 60 PP 10 199.0020358 8/12 G 1/2“ 14 60 PVDF 5 200.0020360 10/14 G 1/4“ 12 67 PP 10 213.0020361 10/14 G 1/4“ 12 67 PVDF 5 205.0020363 10/14 G 3/8“ 12 68 PP 10 230.0020364 10/14 G 3/8“ 12 68 PVDF 3 186.0020366 10/14 G 1/2“ 14 68 PP 10 272.0020367 10/14 G 1/2“ 14 68 PVDF 3 195.00

THOMAFLUID®-Straight Connector with Female Thread made of PP/PVDF

Product specification• Straight, tubing connection on one side, female G- or M-thread on the

other side

Item NW Internal thread

l1 L Material Unit Price

mm mm mm piece EURO

20393 4/6 G 1/8“ 10 30 PP 10 77.0020394 4/6 G 1/8“ 10 30 PVDF 5 87.0020396 4/6 G 1/4“ 15 36 PP 10 121.0020397 4/6 G 1/4“ 15 36 PVDF 5 90.0061605 4/6 G 1/4“ 15 36 PTFE 1 28.0020399 4/6 G 3/8“ 15 36 PP 10 121.00



mm mm mm piece EURO

20400 4/6 G 3/8“ 15 36 PVDF 5 87.0020402 4/6 G 1/2“ 16 37 PP 10 128.0020403 4/6 G 1/2“ 16 37 PVDF 5 92.0020405 6/8 G 1/8“ 10 31 PP 10 128.0020406 6/8 G 1/8“ 10 31 PVDF 5 92.0020408 6/8 G 1/4“ 15 37 PP 10 128.0020409 6/8 G 1/4“ 15 37 PVDF 5 92.0020411 6/8 G 3/8“ 15 37 PP 10 128.0020412 6/8 G 3/8“ 15 37 PVDF 5 92.0020414 6/8 G 1/2“ 16 39 PP 10 128.0020415 6/8 G 1/2“ 16 39 PVDF 5 92.0020417 6/10 G 1/8“ 10 34 PP 10 130.0020418 6/10 G 1/8“ 10 34 PVDF 5 92.0020420 6/10 G 1/4“ 15 40 PP 10 130.0020421 6/10 G 1/4“ 15 40 PVDF 5 92.0020423 6/10 G 3/8“ 15 40 PP 10 130.0020424 6/10 G 3/8“ 15 40 PVDF 5 92.0020426 6/10 G 1/2“ 16 41 PP 10 150.0020427 6/10 G 1/2“ 16 41 PVDF 5 120.0020429 8/10 G 1/8“ 10 36 PP 10 150.0020430 8/10 G 1/8“ 10 36 PVDF 5 120.0020432 8/10 G 1/4“ 15 41 PP 10 148.0020433 8/10 G 1/4“ 15 41 PVDF 5 117.0020435 8/10 G 3/8“ 15 41 PP 10 148.0020436 8/10 G 3/8“ 15 41 PVDF 5 117.0020438 8/10 G 1/2“ 16 43 PP 10 148.0020439 8/10 G 1/2“ 16 43 PVDF 5 117.0020441 8/12 G 1/4“ 15 41 PP 10 160.0020442 8/12 G 1/4“ 15 41 PVDF 5 120.0020444 8/12 G 3/8“ 15 41 PP 10 160.0020445 8/12 G 3/8“ 15 41 PVDF 5 120.0020447 8/12 G 1/2“ 16 44 PP 10 160.0020448 8/12 G 1/2“ 16 43 PVDF 5 120.0020450 10/14 G 1/4“ 15 44 PP 10 220.0020451 10/14 G 1/4“ 15 44 PVDF 5 155.0020453 10/14 G 3/8“ 15 44 PP 10 220.0020454 10/14 G 3/8“ 15 44 PVDF 5 231.0020456 10/14 G 1/2“ 16 45 PP 10 247.0020457 10/14 G 1/2“ 16 45 PVDF 5 249.0020392 4/6 NPT 1/8“ 12 32 PP 1 12.0020395 4/6 NPT 1/8“ 12 32 PVDF 1 18.0020398 4/6 NPT 1/4“ 17 38 PP 1 13.0020401 4/6 NPT 1/4“ 17 38 PVDF 1 19.0020404 4/6 NPT 3/8“ 18 39 PP 1 13.0020407 4/6 NPT 3/8“ 18 39 PVDF 1 19.0020410 4/6 NPT 1/2“ 23 47 PP 1 13.0020413 4/6 NPT 1/2“ 23 47 PVDF 1 19.0020416 6/8 NPT 1/8“ 12 35 PP 1 13.0020419 6/8 NPT 1/8“ 12 35 PVDF 1 19.0020422 6/8 NPT 1/4“ 17 41 PP 1 13.0020425 6/8 NPT 1/4“ 17 41 PVDF 1 19.0020428 6/8 NPT 3/8“ 18 42 PP 1 13.0020431 6/8 NPT 3/8“ 18 42 PVDF 1 19.0020434 6/8 NPT 1/2“ 23 48 PP 1 13.0020437 6/8 NPT 1/2“ 23 48 PVDF 1 19.00





mm mm mm piece EURO

20440 8/10 NPT 1/8“ 12 38 PP 1 15.0020443 8/10 NPT 1/8“ 12 38 PVDF 1 24.0020446 8/10 NPT 1/4“ 17 43 PP 1 15.0020449 8/10 NPT 1/4“ 17 43 PVDF 1 24.0020452 8/10 NPT 3/8“ 18 44 PP 1 15.0020455 8/10 NPT 3/8“ 18 44 PVDF 1 24.0020458 8/10 NPT 1/2“ 23 51 PP 1 15.0020461 8/10 NPT 1/2“ 23 51 PVDF 1 24.0020464 8/12 NPT 1/4“ 17 48 PP 1 16.0020467 8/12 NPT 1/4“ 17 48 PVDF 1 25.0020470 8/12 NPT 3/8“ 18 49 PP 1 16.0020473 8/12 NPT 3/8“ 18 49 PVDF 1 25.0020476 8/12 NPT 1/2“ 23 53 PP 1 16.0020479 8/12 NPT 1/2“ 23 53 PVDF 1 25.0020482 10/14 NPT 1/4“ 17 53 PP 1 22.0020485 10/14 NPT 1/4“ 17 53 PVDF 1 31.0020488 10/14 NPT 3/8“ 18 54 PP 1 22.0020491 10/14 NPT 3/8“ 18 54 PVDF 1 31.0020494 10/14 NPT 1/2“ 23 59 PP 1 25.0020497 10/14 NPT 1/2“ 23 59 PVDF 1 50.0020518 4/6 M6 x 1 10 30 PP 10 on req.20521 4/6 M6 x 1 10 30 PVDF 5 on req.20524 4/6 M10 x 1 10 31 PP 10 on req.20527 4/6 M10 x 1 10 31 PVDF 5 on req.20459 4/6 M10 x 1.5 10 31 PP 10 on req.20460 4/6 M10 x 1.5 10 31 PVDF 5 on req.20462 4/6 M12 x 1.5 15 36 PP 10 on req.20463 4/6 M12 x 1.5 15 36 PVDF 5 on req.20465 4/6 M16 x 1.5 15 36 PP 10 on req.20466 4/6 M16 x 1.5 15 36 PVDF 5 on req.20468 4/6 M18 x 1.5 15 36 PP 10 on req.20469 4/6 M18 x 1.5 15 36 PVDF 5 on req.20471 6/8 M10 x 1 10 31 PP 10 on req.20472 6/8 M10 x 1 10 31 PVDF 5 on req.20474 6/8 M12 x 1.5 15 37 PP 10 on req.20475 6/8 M12 x 1.5 15 37 PVDF 5 on req.20477 6/8 M16 x 1.5 15 37 PP 10 on req.20478 6/8 M16 x 1.5 15 37 PVDF 5 on req.20480 6/8 M18 x 1.5 15 38 PP 10 on req.20481 6/8 M18 x 1.5 15 38 PVDF 5 on req.20483 6/10 M10 x 1.5 10 34 PP 10 on req.20484 6/10 M10 x 1.5 10 34 PVDF 5 on req.20486 6/10 M12 x 1.5 15 40 PP 10 on req.20487 6/10 M12 x 1.5 15 40 PVDF 5 on req.20489 6/10 M16 x 1.5 15 40 PP 10 on req.20490 6/10 M16 x 1.5 15 40 PVDF 5 on req.20492 6/10 M18 x 1.5 15 40 PP 10 on req.20493 6/10 M18 x 1.5 15 40 PVDF 5 on req.20495 8/10 M10 x 1.5 10 36 PP 10 on req.20496 8/10 M10 x 1.5 10 36 PVDF 5 on req.20498 8/10 M12 x 1.5 15 41 PP 10 on req.20499 8/10 M12 x 1.5 15 41 PVDF 5 on req.20501 8/10 M16 x 1.5 15 41 PP 10 on req.20502 8/10 M16 x 1.5 15 41 PVDF 5 on req.20504 8/10 M18 x 1.5 15 43 PP 10 on req.



mm mm mm piece EURO

20505 8/10 M18 x 1.5 15 43 PVDF 5 on req.20507 8/12 M12 x 1.5 15 41 PP 10 on req.20508 8/12 M12 x 1.5 15 41 PVDF 5 on req.20510 8/12 M14 x 1.5 15 41 PP 10 on req.20511 8/12 M14 x 1.5 15 41 PVDF 5 on req.20513 8/12 M16 x 1.5 15 41 PP 10 on req.20514 8/12 M16 x 1.5 15 41 PVDF 5 on req.20516 8/12 M18 x 1.5 15 41 PP 10 on req.20517 8/12 M18 x 1.5 15 44 PVDF 5 on req.20519 10/14 M12 x 1.5 15 44 PP 10 on req.20520 10/14 M12 x 1.5 15 44 PVDF 5 on req.20522 10/14 M14 x 1.5 15 44 PP 10 on req.20523 10/14 M14 x 1.5 15 44 PVDF 5 on req.20525 10/14 M16 x 1.5 15 44 PP 10 on req.20526 10/14 M16 x 1.5 15 44 PVDF 5 on req.20528 10/14 M18 x 1.5 15 44 PP 10 on req.20529 10/14 M18 x 1.5 15 44 PVDF 5 on req.

THOMAFLUID®-Elbow Connector made of PP/PVDF

Product specification• L-shape, tubing connection on both sides

Item NW D L1 Material Unit Price mm mm mm piece EURO




THOMAFLUID®-Elbow Connector made of PP/PVDF - Bulkhead

Product specification• L-shape, tubing connection on both sides, control panel mounting

Item NW L1 L2 WAF Material Unit Price mm mm mm mm piece EURO

20564 4/6 25 36 14 PP 10 64.0020565 4/6 25 36 14 PVDF 5 153.0020567 6/8 27 39 17 PP 10 100.0020568 6/8 27 39 17 PVDF 5 192.0020570 6/10 32 46 22 PP 10 110.0020571 6/10 32 46 22 PVDF 5 189.0020573 8/10 34 47 22 PP 10 124.0020574 8/10 34 47 22 PVDF 5 200.0020576 8/12 34 51 24 PP 10 132.0020577 8/12 34 51 24 PVDF 5 131.0020579 10/14 39 56 27 PP 5 147.0020580 10/14 39 56 27 PVDF 3 138.00

THOMAFLUID®-Elbow Connector with Male Thread made of PP/PVDF - short

Product specification• L-shape, tubing connection on one side; male G-, NPT- or M-thread on

the other side; short model


L1 L2 Material Unit Price

mm mm mm piece EURO

20582 4/6 G 1/8“ 25 12 PP 10 52.0020583 4/6 G 1/8“ 25 12 PVDF 5 96.0020585 4/6 G 1/4“ 25 12 PP 10 65.0020586 4/6 G 1/4“ 25 12 PVDF 5 99.0020588 4/6 G 3/8“ 28 12 PP 10 73.0020589 4/6 G 3/8“ 28 12 PVDF 5 114.0020591 4/6 G 1/2“ 31 15 PP 10 113.00



mm mm mm piece EURO

20592 4/6 G 1/2“ 31 15 PVDF 5 141.0020594 6/8 G 1/8“ 27 12 PP 10 113.0020595 6/8 G 1/8“ 27 12 PVDF 5 141.0020597 6/8 G 1/4“ 27 12 PP 10 113.0020598 6/8 G 1/4“ 27 12 PVDF 5 141.0020600 6/8 G 3/8“ 30 12 PP 10 120.0020601 6/8 G 3/8“ 30 12 PVDF 5 144.0020603 6/8 G 1/2“ 33 15 PP 10 126.0020604 6/8 G 1/2“ 33 15 PVDF 5 160.0020606 6/10 G 1/8“ 32 15 PP 10 127.0020607 6/10 G 1/8“ 32 15 PVDF 5 160.0020609 6/10 G 1/4“ 32 15 PP 10 127.0020610 6/10 G 1/4“ 32 15 PVDF 5 159.0020612 6/10 G 3/8“ 32 15 PP 10 130.0020613 6/10 G 3/8“ 32 15 PVDF 5 160.0020615 6/10 G 1/2“ 35 15 PP 10 140.0020616 6/10 G 1/2“ 35 15 PVDF 5 173.0020618 8/10 G 1/8“ 34 15 PP 10 133.0020619 8/10 G 1/8“ 34 15 PVDF 5 175.0020621 8/10 G 1/4“ 34 15 PP 10 133.0020622 8/10 G 1/4“ 34 15 PVDF 5 173.0020624 8/10 G 3/8“ 34 15 PP 10 134.0020625 8/10 G 3/8“ 34 15 PVDF 5 123.0020627 8/10 G 1/2“ 37 15 PP 10 134.0020628 8/10 G 1/2“ 37 15 PVDF 5 160.0020630 8/12 G 1/8“ 34 17 PP 5 125.0020631 8/12 G 1/8“ 34 17 PVDF 5 180.0020633 8/12 G 1/4“ 34 17 PP 5 125.0020634 8/12 G 1/4“ 34 17 PVDF 5 176.0020636 8/12 G 3/8“ 34 17 PP 5 130.0020637 8/12 G 3/8“ 34 17 PVDF 5 190.0020639 8/12 G 1/2“ 37 17 PP 5 152.0020640 8/12 G 1/2“ 37 17 PVDF 5 190.0020642 10/14 G 1/8“ 39 18 PP 5 155.0020643 10/14 G 1/8“ 39 18 PVDF 5 135.0020645 10/14 G 1/4“ 39 18 PP 5 155.0020646 10/14 G 1/4“ 39 18 PVDF 5 180.0020648 10/14 G 3/8“ 39 18 PP 5 155.0020649 10/14 G 3/8“ 39 18 PVDF 5 180.0020651 10/14 G 1/2“ 39 18 PP 5 165.0020652 10/14 G 1/2“ 39 18 PVDF 5 200.0020654 4/6 NPT 1/8“ 18 17 PP 10 52.0020655 4/6 NPT 1/8“ 18 17 PVDF 5 96.0020657 4/6 NPT 1/4“ 23 12 PP 10 65.0020658 4/6 NPT 1/4“ 23 12 PVDF 5 99.0020660 4/6 NPT 3/8“ 28 12 PP 10 73.0020661 4/6 NPT 3/8“ 28 12 PVDF 5 109.0020663 4/6 NPT 1/2“ 31 15 PP 10 120.0020664 4/6 NPT 1/2“ 31 15 PVDF 5 141.0020666 6/8 NPT 1/8“ 27 12 PP 10 120.0020667 6/8 NPT 1/8“ 27 12 PVDF 5 141.0020669 6/8 NPT 1/4“ 27 12 PP 10 113.0020670 6/8 NPT 1/4“ 27 12 PVDF 5 141.0020672 6/8 NPT 3/8“ 30 12 PP 10 120.0020673 6/8 NPT 3/8“ 30 12 PVDF 5 145.00





mm mm mm piece EURO

20675 6/8 NPT 1/2“ 33 15 PP 10 126.0020676 6/8 NPT 1/2“ 33 15 PVDF 5 160.0020678 6/10 NPT 1/8“ 32 15 PP 10 130.0020679 6/10 NPT 1/8“ 32 15 PVDF 5 160.0020681 6/10 NPT 1/4“ 32 15 PP 10 127.0020682 6/10 NPT 1/4“ 32 15 PVDF 5 159.0020684 6/10 NPT 3/8“ 32 15 PP 10 130.0020685 6/10 NPT 3/8“ 32 15 PVDF 5 159.0020687 6/10 NPT 1/2“ 35 15 PP 10 140.0020688 6/10 NPT 1/2“ 35 15 PVDF 5 175.0020690 8/10 NPT 1/8“ 34 15 PP 10 140.0020691 8/10 NPT 1/8“ 34 15 PVDF 5 175.0020693 8/10 NPT 1/4“ 34 15 PP 10 133.0020694 8/10 NPT 1/4“ 34 15 PVDF 5 173.0020696 8/10 NPT 3/8“ 34 15 PP 10 134.0020697 8/10 NPT 3/8“ 34 15 PVDF 5 123.0020699 8/10 NPT 1/2“ 37 15 PP 10 134.0020700 8/10 NPT 1/2“ 37 15 PVDF 5 129.0020702 8/12 NPT 1/8“ 34 17 PP 5 130.0020703 8/12 NPT 1/8“ 34 17 PVDF 5 173.0020705 8/12 NPT 1/4“ 34 17 PP 5 129.0020706 8/12 NPT 1/4“ 34 17 PVDF 5 173.0020708 8/12 NPT 3/8“ 34 17 PP 5 130.0020709 8/12 NPT 3/8“ 34 17 PVDF 5 180.0020711 8/12 NPT 1/2“ 37 17 PP 5 155.0020712 8/12 NPT 1/2“ 37 17 PVDF 5 180.0020714 10/14 NPT 1/8“ 39 18 PP 5 155.0020715 10/14 NPT 1/8“ 39 18 PVDF 5 180.0020717 10/14 NPT 1/2“ 39 18 PP 5 165.0020718 10/14 NPT 1/2“ 39 18 PVDF 5 200.0020773 4/6 M5 x 0.8 25 12 PP 10 on req.20776 4/6 M5 x 0.8 25 12 PVDF 5 on req.20779 4/6 M6 x 1 25 12 PP 10 on req.20782 4/6 M6 x 1 25 12 PVDF 5 on req.20785 4/6 M8 x 1.25 25 12 PP 10 on req.20788 4/6 M8 x 1.25 25 12 PVDF 5 on req.20720 4/6 M10 x 1.5 25 12 PP 10 on req.20721 4/6 M10 x 1.5 25 12 PVDF 5 on req.20723 4/6 M12 x 1.5 25 12 PP 10 on req.20724 4/6 M12 x 1.5 25 12 PVDF 5 on req.20726 4/6 M16 x 1.5 28 12 PP 10 on req.20727 4/6 M16 x 1.5 28 12 PVDF 5 on req.20729 4/6 M18 x 1.5 28 12 PP 10 on req.20730 4/6 M18 x 1.5 28 12 PVDF 5 on req.20732 6/8 M10 x 1.5 27 12 PP 10 on req.20733 6/8 M10 x 1.5 27 12 PVDF 5 on req.20735 6/8 M12 x 1.5 27 12 PP 10 on req.20736 6/8 M12 x 1.5 27 12 PVDF 5 on req.20738 6/8 M16 x 1.5 30 12 PP 10 on req.20739 6/8 M16 x 1.5 30 12 PVDF 5 on req.20741 6/8 M18 x 1.5 30 12 PP 10 on req.20742 6/8 M18 x 1.5 30 12 PVDF 5 on req.20744 6/10 M10 x 1.5 32 15 PP 10 on req.20745 6/10 M10 x 1.5 32 15 PVDF 5 on req.20747 6/10 M12 x 1.5 32 15 PP 10 on req.



mm mm mm piece EURO

20748 6/10 M12 x 1.5 32 15 PVDF 5 on req.20750 6/10 M16 x 1.5 32 15 PP 10 on req.20751 6/10 M16 x 1.5 32 15 PVDF 5 on req.20753 6/10 M18 x 1.5 32 15 PP 10 on req.20754 6/10 M18 x 1.5 32 15 PVDF 5 on req.20756 8/10 M10 x 1.5 34 15 PP 10 on req.20757 8/10 M10 x 1.5 34 15 PVDF 5 on req.20759 8/10 M12 x 1.5 34 15 PP 10 on req.20760 8/10 M12 x 1.5 34 15 PVDF 5 on req.20762 8/10 M16 x 1.5 34 15 PP 10 on req.20763 8/10 M16 x 1.5 34 15 PVDF 5 on req.20765 8/10 M18 x 1.5 34 15 PP 10 on req.20766 8/10 M18 x 1.5 34 15 PVDF 5 on req.20768 8/12 M12 x 1.5 34 17 PP 5 on req.20769 8/12 M12 x 1.5 34 17 PVDF 5 on req.20771 8/12 M14 x 1.5 34 17 PP 5 on req.20772 8/12 M14 x 1.5 34 17 PVDF 5 on req.20774 8/12 M16 x 1.5 34 17 PP 5 on req.20775 8/12 M16 x 1.5 34 17 PVDF 5 on req.20777 8/12 M18 x 1.5 34 17 PP 5 on req.20778 8/12 M18 x 1.5 34 17 PVDF 5 on req.20780 10/14 M12 x 1.5 39 18 PP 5 on req.20781 10/14 M12 x 1.5 39 18 PVDF 5 on req.20783 10/14 M14 x 1.5 39 18 PP 5 on req.20784 10/14 M14 x 1.5 39 18 PVDF 5 on req.20786 10/14 M16 x 1.5 39 18 PP 5 on req.20787 10/14 M16 x 1.5 39 18 PVDF 5 on req.20789 10/14 M18 x 1.5 39 18 PP 5 on req.20790 10/14 M18 x 1.5 39 18 PVDF 5 on req.

THOMAFLUID®-Elbow Connector with Male Thread made of PP/PVDF - long

Product specification• L-shape, tubing connection on one side; male G- or NPT-thread on the

other side; long model



mm mm mm piece EURO

20792 4/6 G 1/8“ 8 25 PP 10 60.0020793 4/6 G 1/8“ 8 25 PVDF 5 165.0020795 4/6 G 1/4“ 12 25 PP 10 70.0020796 4/6 G 1/4“ 12 25 PVDF 5 165.0020798 4/6 G 3/8“ 12 28 PP 10 110.00





mm mm mm piece EURO

20799 4/6 G 3/8“ 12 28 PVDF 5 165.0020801 4/6 G 1/2“ 14 31 PP 10 136.0020802 4/6 G 1/2“ 14 31 PVDF 3 123.0020804 6/8 G 1/8“ 8 27 PP 10 140.0020805 6/8 G 1/8“ 8 27 PVDF 5 165.0020807 6/8 G 1/4“ 12 27 PP 10 140.0020808 6/8 G 1/4“ 12 27 PVDF 5 164.0020810 6/8 G 3/8“ 12 30 PP 10 150.0020811 6/8 G 3/8“ 12 30 PVDF 5 180.0020813 6/8 G 1/2“ 14 33 PP 10 150.0020814 6/8 G 1/2“ 14 33 PVDF 3 129.0020816 6/10 G 1/8“ 8 32 PP 1 on req.20817 6/10 G 1/8“ 8 32 PVDF 1 on req.20819 6/10 G 1/4“ 12 32 PP 1 on req.20820 6/10 G 1/4“ 12 32 PVDF 1 on req.20822 6/10 G 3/8“ 12 32 PP 1 on req.20823 6/10 G 3/8“ 12 32 PVDF 1 on req.20825 6/10 G 1/2“ 14 35 PP 1 on req.20826 6/10 G 1/2“ 14 35 PVDF 1 on req.20828 4/6 NPT 1/4“ 15 23 PP 10 72.0020829 4/6 NPT 1/4“ 15 23 PVDF 5 185.0020831 4/6 NPT 3/8“ 15 28 PP 10 93.0020832 4/6 NPT 3/8“ 15 28 PVDF 5 190.0020834 4/6 NPT 1/2“ 20 31 PP 10 120.0020835 4/6 NPT 1/2“ 20 31 PVDF 3 153.0020837 6/8 NPT 1/8“ 10 27 PP 10 120.0020838 6/8 NPT 1/8“ 10 27 PVDF 5 155.0020840 6/8 NPT 1/4“ 15 27 PP 10 120.0020841 6/8 NPT 1/4“ 15 27 PVDF 5 152.0020843 6/8 NPT 3/8“ 15 30 PP 10 130.0020844 6/8 NPT 3/8“ 15 30 PVDF 5 170.0020846 6/8 NPT 1/2“ 20 33 PP 10 130.0020847 6/8 NPT 1/2“ 20 33 PVDF 3 141.0020849 6/10 NPT 1/8“ 10 32 PP 1 on req.20850 6/10 NPT 1/8“ 10 32 PVDF 1 on req.20852 6/10 NPT 1/4“ 15 32 PP 1 on req.20853 6/10 NPT 1/4“ 15 32 PVDF 1 on req.20855 6/10 NPT 3/8“ 15 32 PP 1 on req.20856 6/10 NPT 3/8“ 15 32 PVDF 1 on req.20858 6/10 NPT 1/2“ 20 35 PP 1 on req.20859 6/10 NPT 1/2“ 20 35 PVDF 1 on req.

THOMAFLUID®-Elbow Connector with Female Thread made of PP/PVDF

Product specification• Straight, tubing connection on one side, female G- or M-thread on the

other side


l1 L1 Mate-rial

Unit Price

mm mm mm piece EURO

20861 4/6 G 1/8“ 12 25 PP 10 62.0020862 4/6 G 1/8“ 12 25 PVDF 5 87.0020864 4/6 G 1/4“ 15 28 PP 10 75.0020865 4/6 G 1/4“ 15 28 PVDF 5 90.0020867 4/6 G 3/8“ 15 31 PP 10 130.0020868 4/6 G 3/8“ 15 31 PVDF 5 90.0020870 4/6 G 1/2“ 16 33 PP 10 121.0020871 4/6 G 1/2“ 16 33 PVDF 5 105.0020873 6/8 G 1/8“ 12 27 PP 10 121.0020874 6/8 G 1/8“ 12 27 PVDF 5 105.0020876 6/8 G 1/4“ 15 30 PP 10 121.0020877 6/8 G 1/4“ 15 30 PVDF 5 105.0020879 6/8 G 3/8“ 15 33 PP 10 130.0020880 6/8 G 3/8“ 15 33 PVDF 5 105.0020882 6/8 G 1/2“ 16 35 PP 10 121.0020883 6/8 G 1/2“ 16 35 PVDF 5 105.0020885 6/10 G 1/8“ 12 32 PP 10 130.0020886 6/10 G 1/8“ 12 32 PVDF 5 136.0020888 6/10 G 1/4“ 15 32 PP 10 130.0020889 6/10 G 1/4“ 15 32 PVDF 5 140.0020891 6/10 G 3/8“ 15 32 PP 10 129.0020892 6/10 G 3/8“ 15 32 PVDF 5 150.0020894 6/10 G 1/2“ 16 37 PP 10 130.0020895 6/10 G 1/2“ 16 37 PVDF 5 150.0020897 4/6 M10 x 1.5 12 25 PP 10 on req.20898 4/6 M10 x 1.5 12 25 PVDF 5 on req.20900 4/6 M12 x 1.5 15 28 PP 10 on req.20901 4/6 M12 x 1.5 15 28 PVDF 5 on req.20903 4/6 M16 x 1.5 15 31 PP 10 on req.20904 4/6 M16 x 1.5 15 31 PVDF 5 on req.20906 4/6 M18 x 1.5 15 31 PP 10 on req.20907 4/6 M18 x 1.5 15 31 PVDF 5 on req.20909 6/8 M10 x 1.5 12 27 PP 10 on req.20910 6/8 M10 x 1.5 12 27 PVDF 5 on req.20912 6/8 M12 x 1.5 15 30 PP 10 on req.20913 6/8 M12 x 1.5 15 30 PVDF 5 on req.20915 6/8 M16 x 1.5 15 33 PP 10 on req.20916 6/8 M16 x 1.5 15 33 PVDF 5 on req.20918 6/8 M18 x 1.5 15 33 PP 10 on req.20919 6/8 M18 x 1.5 15 33 PVDF 5 on req.20921 6/10 M10 x 1.5 12 32 PP 10 on req.20922 6/10 M10 x 1.5 12 32 PVDF 5 on req.20924 6/10 M12 x 1.5 15 32 PP 10 on req.20925 6/10 M12 x 1.5 15 32 PVDF 5 on req.20927 6/10 M16 x 1.5 15 35 PP 10 on req.20928 6/10 M16 x 1.5 15 35 PVDF 5 on req.20930 6/10 M18 x 1.5 15 35 PP 10 on req.20931 6/10 M18 x 1.5 15 35 PVDF 5 on req.20933 8/10 M10 x 1.5 12 34 PP 10 on req.20934 8/10 M10 x 1.5 12 34 PVDF 5 on req.20936 8/10 M12 x 1.5 15 34 PP 10 on req.20937 8/10 M12 x 1.5 15 34 PVDF 5 on req.




l1 L1 Mate-rial

Unit Price

mm mm mm piece EURO

20939 8/10 M16 x 1.5 15 37 PP 10 on req.20940 8/10 M16 x 1.5 15 37 PVDF 5 on req.20942 8/10 M18 x 1.5 15 37 PP 10 on req.20943 8/10 M18 x 1.5 15 37 PVDF 5 on req.20945 8/12 M12 x 1.5 15 34 PP 10 on req.20946 8/12 M12 x 1.5 15 34 PVDF 5 on req.20948 8/12 M14 x 1.5 15 34 PP 10 on req.20949 8/12 M14 x 1.5 15 34 PVDF 5 on req.20951 8/12 M16 x 1.5 15 37 PP 10 on req.20952 8/12 M16 x 1.5 15 37 PVDF 3 on req.20954 8/12 M18 x 1.5 15 37 PP 10 on req.20955 8/12 M18 x 1.5 15 37 PVDF 5 on req.20957 10/14 M12 x 1.5 15 39 PP 10 on req.20958 10/14 M12 x 1.5 15 39 PVDF 5 on req.20960 10/14 M14 x 1.5 15 39 PP 10 on req.20961 10/14 M14 x 1.5 15 39 PVDF 5 on req.20963 10/14 M16 x 1.5 15 39 PP 10 on req.20964 10/14 M16 x 1.5 15 39 PVDF 5 on req.20966 10/14 M18 x 1.5 15 39 PP 10 on req.20967 10/14 M18 x 1.5 15 39 PVDF 5 on req.

THOMAFLUID®-T-Shaped Connector made of PP/PVDF

Product specification• T-shape, tubing connections at three sides

Item NW L1 L2 Material Unit Price mm mm mm piece EURO


THOMAFLUID®-T-Shaped Connector with Male Thread made of PP/PVDF - symmetrical

Product specification• T-shape, tubing connections on two sides; male G-, NPT- or M-thread

on the third side


L1 Material Unit Price

mm mm piece EURO

21047 4/6 G 1/8“ 50 PP 10 96.0021048 4/6 G 1/8“ 50 PVDF 3 132.0021050 4/6 G 1/4“ 50 PP 10 96.0021051 4/6 G 1/4“ 50 PVDF 3 132.0021053 4/6 G 3/8“ 56 PP 10 96.0021054 4/6 G 3/8“ 56 PVDF 3 144.0021056 4/6 G 1/2“ 62 PP 10 125.0021057 4/6 G 1/2“ 62 PVDF 3 162.0021059 6/8 G 1/8“ 54 PP 10 125.0021060 6/8 G 1/8“ 54 PVDF 3 162.0021062 6/8 G 1/4“ 54 PP 10 125.0021063 6/8 G 1/4“ 54 PVDF 3 162.0021065 6/8 G 3/8“ 60 PP 10 125.0021066 6/8 G 3/8“ 60 PVDF 3 162.0021068 6/8 G 1/2“ 66 PP 10 125.0021069 6/8 G 1/2“ 66 PVDF 3 162.0021071 6/10 G 1/8“ 65 PP 10 130.0021072 6/10 G 1/8“ 65 PVDF 3 162.0021074 6/10 G 1/4“ 65 PP 10 130.0021075 6/10 G 1/4“ 65 PVDF 3 162.0021077 6/10 G 3/8“ 65 PP 10 150.0021078 6/10 G 3/8“ 65 PVDF 3 174.0021080 6/10 G 1/2“ 71 PP 10 180.0021081 6/10 G 1/2“ 71 PVDF 1 61.0021083 8/10 G 1/8“ 68 PP 10 180.0021084 8/10 G 1/8“ 68 PVDF 2 122.0021086 8/10 G 1/4“ 68 PP 10 172.0021087 8/10 G 1/4“ 68 PVDF 2 122.0021089 8/10 G 3/8“ 68 PP 10 172.0021090 8/10 G 3/8“ 68 PVDF 2 111.0021092 8/10 G 1/2“ 74 PP 10 172.0021093 8/10 G 1/2“ 74 PVDF 1 60.0021095 8/12 G 1/8“ 68 PP 5 205.0021096 8/12 G 1/8“ 68 PVDF 2 120.0021098 8/12 G 1/4“ 68 PP 5 205.0021099 8/12 G 1/4“ 68 PVDF 2 119.0021101 8/12 G 3/8“ 68 PP 5 215.0021102 8/12 G 3/8“ 68 PVDF 1 61.00




L1 Material Unit Price

mm mm piece EURO

21104 8/12 G 1/2“ 74 PP 3 138.0021105 8/12 G 1/2“ 74 PVDF 1 65.0021107 10/14 G 1/8“ 79 PP 3 138.0021108 10/14 G 1/8“ 79 PVDF 1 65.0021110 10/14 G 1/4“ 79 PP 3 162.0021111 10/14 G 1/4“ 79 PVDF 1 68.0021113 10/14 G 3/8“ 79 PP 3 165.0021114 10/14 G 3/8“ 79 PVDF 1 73.0021116 10/14 G 1/2“ 79 PP 3 168.0021117 10/14 G 1/2“ 79 PVDF 1 76.0021119 4/6 NPT 1/8“ 50 PP 10 100.0021120 4/6 NPT 1/8“ 50 PVDF 3 132.0021122 4/6 NPT 1/4“ 50 PP 10 135.0021123 4/6 NPT 1/4“ 50 PVDF 3 138.0021125 4/6 NPT 3/8“ 56 PP 10 115.0021126 4/6 NPT 3/8“ 56 PVDF 3 147.0021128 4/6 NPT 1/2“ 62 PP 10 130.0021129 4/6 NPT 1/2“ 62 PVDF 3 159.0021131 6/8 NPT 1/8“ 54 PP 10 130.0021132 6/8 NPT 1/8“ 54 PVDF 3 159.0021134 6/8 NPT 1/4“ 54 PP 10 125.0021135 6/8 NPT 1/4“ 54 PVDF 3 159.0021137 6/8 NPT 3/8“ 60 PP 10 150.0021138 6/8 NPT 3/8“ 60 PVDF 2 102.0021140 6/8 NPT 1/2“ 66 PP 10 148.0021141 6/8 NPT 1/2“ 66 PVDF 2 110.0021143 6/10 NPT 1/8“ 65 PP 10 150.0021144 6/10 NPT 1/8“ 65 PVDF 2 110.0021146 6/10 NPT 1/4“ 65 PP 10 150.0021147 6/10 NPT 1/4“ 65 PVDF 2 110.0021149 6/10 NPT 3/8“ 65 PP 10 170.0021150 6/10 NPT 3/8“ 65 PVDF 2 110.0021152 6/10 NPT 1/2“ 71 PP 10 170.0021153 6/10 NPT 1/2“ 71 PVDF 2 120.0021155 8/10 NPT 1/8“ 68 PP 10 170.0021156 8/10 NPT 1/8“ 68 PVDF 2 120.0021158 8/10 NPT 1/4“ 68 PP 10 170.0021159 8/10 NPT 1/4“ 68 PVDF 2 119.0021161 8/10 NPT 3/8“ 68 PP 10 170.0021162 8/10 NPT 3/8“ 68 PVDF 2 120.0021164 8/10 NPT 1/2“ 74 PP 10 190.0021165 8/10 NPT 1/2“ 74 PVDF 2 124.0021167 8/12 NPT 1/8“ 68 PP 3 126.0021168 8/12 NPT 1/8“ 68 PVDF 2 124.0021170 8/12 NPT 1/4“ 68 PP 3 126.0021171 8/12 NPT 1/4“ 68 PVDF 2 124.0021173 8/12 NPT 3/8“ 68 PP 3 126.0021174 8/12 NPT 3/8“ 68 PVDF 2 124.0021176 8/12 NPT 1/2“ 74 PP 3 126.0021177 8/12 NPT 1/2“ 74 PVDF 2 124.0021179 10/14 NPT 1/8“ 79 PP 3 159.0021180 10/14 NPT 1/8“ 79 PVDF 2 124.0021182 10/14 NPT 1/4“ 79 PP 3 159.0021183 10/14 NPT 1/4“ 79 PVDF 2 124.0021185 10/14

Documents

Thomafluid iii...THOMAFLUID® III - 2015 Tubing Olive Connectors (I-Ø: 3 - 25 mm) 3 - 19 • made of HDPE, PA, PBT, POM, PP, PP glass fibre reinforced, PTFE, PVDF, TPX • barb unions,