Thorn - Fluorescent Battens and Trunking Systems

312Lighting people and places

www.thornlighting.com.au312 www.thornlight.com.au

Indoor Commercial

MaxiBatten

317

Lighting people and places

313

Thorn offers many different types of Fluorescent battens, as well as a highly flexible and versatile trunking system. Use this pictorial summary to help find what you need

Fluorescent Battens and Trunking Systems

Primata II

321

Cadet

315

Mandi

319

Bikini

320

Arrowslim

314

IGA

, Win

thro

p, W

A

For trunking compatible spotlights see

Prospector LED

235

Prospector

234

Graffiti

228

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S


www.thornlighting.com.au

Arrowslim T5

37.8

37.8

64.9

21.4

68.6

41.8

37.8

70.2

61.5

37.8

65.0

50.2

Single batten Twin batten

37.8

70.2

61.5

37.8

65.0

50.2

L

Materials/Finish Spine: steel, white enamel finish (RAL 9010) Lampholder: polycarbonate, white finish

Installation/Mounting Suitable for walls, ceilings or in cornice/pelmet areas. Three-position rotating lampholders allows lamp to be located either side of the spine.

Specification To specify state: Slim single or twin lamp fluorescent batten for 14/28W, T16 linear fluorescent lamps. As Thorn Arrowslim T5.

•Suitableforawiderangeof applications including industrial, retail, commercial office and education lighting

•Highfrequencyelectronicballasts, providing increased efficiency whilst eliminating flicker

•Three-positionrotatinglampholder provides maximum mounting flexibility for single lamp versions

•Availableinbothhigh output and high efficiency T5 (T16) lamps

Arrowslim is a dedicated T5 (T16) fitting with single and twin lamp variants and enhanced appearance

90°

30° 30°

0°

60°60°

90°

A T200

100

300

cd/1000 lm

Arrowslim single batten Lamp: 1 x 28W T16 ULOR: 0.25 DLOR: 0.74 LOR: 0.99 SHR max: 1.97 LMC: A

40 min 40 min

Wattage Lengths

14W 572

28W 1172

T16 (FDH) G5 14-28W AS/NZS60598 Class I Electrical IP20

Ordering Guide Supplied complete with 840 lamp(s).Description Ilcos Code Socket Wt (kg) SAP Code ARROSLM 1X14W LI840 FD G5 0.7 96211392ARROSLM 1X28W LI840 FD G5 1.1 96211396ARROSLM 2X28W LI840 FD G5 1.2 96211404

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S


315www.thornlighting.com.au

Attachments

Dispersive Reflector

•Openendedwhitefinishedmetal reflector

Slotted Reflector

•Openendedindustrialmetalreflector with slots to give upward light

Closed end reflector

•Enclosedindustrialmetalreflector

Angle Reflector

•Asymmetricorrightanglereflector

Wire Guard

•Sturdywhitepaintedguard.

•Completewithmountingbrackets which allow the guard to be hinged from either side for easy installation and maintenance

Cadet

A slim profile square sided batten range, with a selection of attachments available to suit a variety of lighting applications

•Built-inendcapspacerforeasy accurate in-line mounting

•Doublekeyholemountingholes

•Singleandtwinlampoptionswith bare or diffused options

•Fusedterminalblockstandardforhighfrequency

•Widerangeofattachments

51.5

85

18W - 61236W - 122258W - 1522

51.5

80

54.5 54.5

54.5120

18W - 61736W - 122558W - 1527

90.7

Materials/Finish Body: steel painted white. End caps: Injection moulded polycarbonate in white. Diffuser: acrylic prismatic.

Installation/Mounting 2-way and earth terminal block with capacity for 2 x 2.5mm2 cables. For installation in normal dry indoor atmospheres.

Specification To specify state: Slim cross section Fluorescent batten with clip on plate with earthing fixation and diffuser attachments for 18/36/58W T26 linear fluorescent lamps. As Thorn Cadet.

Single Cadet batten Twin Cadet batten

Single Cadet diffused batten Twin Cadet diffused batten

T26 (FD) G13 18-58W AS/NZS60598 Class I Electrical IP20



Dispersive reflector Slotted reflector

Closed end reflector

Closed end reflector with wire guard

Angle reflector

Wire guard

2

90˚

30˚30˚ 0˚

60˚60˚

120˚120˚

90˚

100

50

150

200

cd/1000 lm

1

2

Cadet Batten Lamp: 1 x 36W T26 LOR: 96%

90˚

30˚30˚ 0˚

60˚60˚

120˚120˚

90˚

100

50

150

200

cd/1000 lm

1

2

Cadet Batten Lamp: 2 x 36W T26 LOR: 84%

90˚

30˚30˚ 0˚

60˚60˚

120˚120˚

90˚

100

50

150

200

cd/1000 lm

12

Cadet Diffused Batten Lamp: 1 x 36W T26 LOR: 69%

2

90˚

30˚30˚ 0˚

60˚60˚

120˚120˚

90˚

100

50

150

200

cd/1000 lm

1

Cadet Diffused Batten Lamp: 2 x 36W T26 LOR: 80%

Ordering Guide Supplied complete with 840 lamp(s).Description Ilcos

Code Socket Wt (kg) SAP Code

BattenCADET BARE 1X18W HPF LI840 FD G13 1.8 96015598CADET BARE 1X30W HPF LI840 FD G13 2.1 96015617CADET BARE 1X36W HPF LI840 FD G13 2.2 96015643CADET BARE 1X58W HPF LI840 FD G13 2.6 96015674CADET BARE 2X18W HPF LI840 FD G13 1.9 96015682CADET BARE 2X36W HPF LI840 FD G13 3.2 96015707CADET BARE 2X58W HPF LI840 FD G13 3.7 96015725CADET DIAM 1X18W HPF LI840 FD G13 1.9 96015738CADET DIAM 1X36W HPF LI840 FD G13 2.3 96015754CADET DIAM 2X18W HPF LI840 FD G13 2.0 96015778CADET DIAM 2X36W HPF LI840 FD G13 3.3 96015794Electronic versionsCADET BARE 1X18W HF LI840 FD G13 1.6 96015588CADET BARE 1X18W HFD LI840 FD G13 1.6 96015611CADET BARE 1X18W HFX LI840 FD G13 1.6 96063234CADET BARE 1X30W HF LI840 FD G13 1.9 96058270CADET BARE 1X36W HF LI840 FD G13 2.0 96015633CADET BARE 1X36W HFD LI840 FD G13 2.0 96033245CADET BARE 1X58W HF LI840 FD G13 2.4 96015671CADET BARE 2X18W HF LI840 FD G13 1.7 96015679CADET BARE 2X36W HF LI840 FD G13 3.0 96015700CADET BARE 2X58W HF LI840 FD G13 3.5 96015723Emergency versionsCADET BARE 1X36 E2 LI840 FD G13 2.7 96059840CADET BARE 2X36 HF E2 LI840 FD G13 3.3 96059843CADET DIFFUSED 1X36 E2 LI840 FD G13 2.8 96059841CADET DIFFUSED 2X36W HF E2 LI840 FD G13 3.7 96059845Attachments*Dispersive reflectorCADET DISPERSIVE REFLECTOR 18W 96015823CADET DISPERSIVE REFLECTOR 36W 96015824CADET DISPERSIVE REFLECTOR 58W 96015826Slotted reflectorCADET SLOTTED REFLECTOR 18W 96015827CADET SLOTTED REFLECTOR 36W 96015828CADET SLOTTED REFLECTOR 58W 96015829Close end reflectorCADET CLOSE END REFLECTOR 18W 96015732CADET CLOSE END REFLECTOR 36W 96015733CADET CLOSE END REFLECTOR 58W 96015734Angle reflectorCADET ANGLE REFLECTOR 18W 96015729CADET ANGLE REFLECTOR 36W 96015730CADET ANGLE REFLECTOR 58W 96015731Wire guardCADET WIRE GUARD 18W 96020715CADET WIRE GUARD 36W 96032346CADET WIRE GUARD 58W 96032348Wire guard for close end reflectorCADET CLOSE END WIRE GUARD 18W 96030579CADET CLOSE END WIRE GUARD 36W 96030580CADET CLOSE END WIRE GUARD 58W 96030581DiffuserCADET DIFFUSER 1 X 58 RE 96062682CADET DIFFUSER 2 X 58 RE 96062679*Attachmentsforusewithbarebattenonly.HF-HighFrequency,HPF-Magnetic, DIAM - Diffused, HFD - Digital Dimming (DSI), HFX - Digital Dimming (DALI)

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



MaxiBatten T8 T26 (FD) G13 18-36W AS/NZS60598 Class I Electrical IP20

A modern theme on a traditional product, suited to domestic, industrial, office and education applications

•Modulardesign

•Trueendtoendmountingforbare, diffused and wire guard options

•Fusedterminalblockstandardforhighfrequencyversion

•Widebody

•Largeentryhole

•Powdercoatedsteelbody

•Coverclipsonandscrewsinfor added support

•Knockoutholesinendcaps

Materials/Finish Body: robust post powder coated steel. Diffuser: acrylic UV stabilised End caps: injection moulded polycarbonate.


MaxiBatten 136 single

MaxiBatten 236 twin

88.8

97.5

98.1

115.7

L

cd/1000 lm

600

600

300

300

00

Cat No.

Lamp:

ULOR: DLOR: LOR:

SHR max:

MBD236

2 x 36W T26

0.176 0.562 0.738

1.68

900

75

150

225

900

Ordering Guide Supplied complete with 840 lamp(s).Description

Ilcos Code

Socket Wt (kg)

SAP Code

Magnetic versionsMAXIBATTEN 118 BARE LI840 FD G13 1.9 96039506MAXIBATTEN 136 BARE LI840 FD G13 2.4 96039507MAXIBATTEN 218 BARE LI840 FD G13 2 96039509MAXIBATTEN 236 BARE LI840 FD G13 3.4 96039510MAXIBATTEN 118 DIFFUSED LI840 FD G13 2.0 96039512MAXIBATTEN 136 DIFFUSED LI840 FD G13 2.8 96039513MAXIBATTEN 218 DIFFUSED LI840 FD G13 2.5 96039515MAXIBATTEN 236 DIFFUSED LI840 FD G13 4.4 96039516Electronic versionsMAXIBATTEN 118 BARE HF LI840 FD G13 1.4 96039518 MAXIBATTEN BARE 118W HFD LI840 FD G13 1.4 96041850MAXIBATTEN 136 BARE HF LI840 FD G13 1.9 96039519 MAXIBATTEN BARE 136W HFD LI840 FD G13 1.9 96041851MAXIBATTEN BARE 136W HFX LI840 FD G13 1.9 96063703MAXIBATTEN BARE 158W HFD LI840 FD G13 2.0 96041852MAXIBATTEN 218 BARE HF LI840 FD G13 1.5 96039521 MAXIBATTEN 236 BARE HF LI840 FD G13 2.9 96039522 MAXIBATTEN BARE 236W HFD LI840 FD G13 2.9 96064989MAXIBATTEN BARE 236W HFX LI840 FD G13 2.9 96063704MAXIBATTEN 118 DIFFUSED HF LI840 FD G13 1.5 96039524 MAXIBATTEN DIFF 118W HFX LI840 FD G13 1.5 96066720MAXIBATTEN 136 DIFFUSED HF LI840 FD G13 2.3 96039525 MAXIBATTEN DIFF 136W HFX LI840 FD G13 2.3 96063705MAXIBATTEN 218 DIFFUSED HF LI840 FD G13 2.0 96039527 MAXIBATTEN 236 DIFFUSED HF LI840 FD G13 3.9 96039528 MAXIBATTEN DIFF 236W HFD LI840 FD G13 3.9 96047266MAXIBATTEN DIFF 236W HFX LI840 FD G13 3.9 96063706Emergency versionsMAXIBATTEN BARE 136W E2 LI840 FD G13 2.9 96059838MAXIBATTEN BARE 218W HF E2 LI840 FD G13 2.0 96059849MAXIBATTEN BARE 236W HF E2 LI840 FD G13 3.9 96061147MAXIBATTEN DIFF 136W E2 LI840 FD G13 3.3 96059839MAXIBATTEN DIFF 218W HF E2 LI840 FD G13 2.9 96059848MAXIBATTEN DIFF 236W HF E2 LI840 FD G13 4.9 96061148AttachmentsDispersive reflectorMAXIBATTEN 118 DISPERSIVE REFLECTOR 96039555MAXIBATTEN 136 DISPERSIVE REFLECTOR 96039556MAXIBATTEN 218 DISPERSIVE REFLECTOR 96039552MAXIBATTEN 236 DISPERSIVE REFLECTOR 96039553Wire GuardMAXIBATTEN 118 BARE WIRE GUARD 96039577MAXIBATTEN 136 BARE WIRE GUARD 96039578MAXIBATTEN 218 BARE WIRE GUARD 96039580MAXIBATTEN 236 BARE WIRE GUARD 96039581HF-HighFrequency,HFD-DigitalDimming(DSI),HFX-DigitalDimming (DALI)

Wattage Length18W 61936W 1229

Specification To specify state: Wide cross section fluorescent batten with clip on plate with earthing fixation and diffuser attachments for 18/36W T26 linear fluorescent lamps. As Thorn MaxiBatten T8.



MaxiBatten T5 T16 (FD) G5 14-35W AS/NZS 60598 Class I Electrical IP20

T5 lamp technology is the next step for the popular MaxiBatten range

•Modulardesign

•Trueendtoendmountingforbare, diffused and wire guardoptions

•Fusedterminalblockstandard

•Widebody

•Largeentryhole

•Powdercoatedsteelbody

•Coverclipsonandscrewsinfor added support

•Knockoutholesinendcaps

Materials/Finish Body: robust post powder coated steel. Diffuser: acrylic UV stabilised. End caps: injection moulded polycarbonate.


Specification To specify state: Wide cross section fluorescent batten with clip on plate with earthing fixation and diffuser option for14/28/35W T16 linear fluorescent lamps. As Thorn MaxiBatten T5.

88.8

97.5

98.1

115.7

L

Ordering Guide Supplied complete with 840 lamp(s)

Description Ilcos Code Socket Wt (kg) SAP Code MAXIBATTEN 114 BARE LI840 FD G5 1.5 96039530 MAXIBATTEN BARE 114W HFX LI840 FD G5 1.5 96062294MAXIBATTEN 128 BARE LI840 FD G5 2.0 96039531 MAXIBATTEN BARE 128W HFX LI840 FD G5 2.0 96062295MAXIBATTEN DIFF 128W HFX LI840 FD G5 2.0 96060720MAXIBATTEN 135 BARE LI840 FD G5 2.3 96039532 MAXIBATTEN 214 BARE LI840 FD G5 1.9 96040262 MAXIBATTEN BARE 214W HFD LI840 FD G5 1.9 96041846MAXIBATTEN 228 BARE LI840 FD G5 2.4 96040264 MAXIBATTEN BARE 228W HFX LI840 FD G5 2.4 96063047MAXIBATTEN 235 BARE LI840 FD G5 2.7 96040266 MAXIBATTEN BARE 235W HFD LI840 FD G5 2.7 96063848MAXIBATTEN 114 DIFFUSED LI840 FD G5 1.9 96039536 MAXIBATTEN DIFF 114W HFX LI840 FD G5 1.9 96063653MAXIBATTEN 128 DIFFUSED LI840 FD G5 2.4 96039537 MAXIBATTEN DIFF 228W HFD LI840 FD G5 96044372MAXIBATTEN DIFF 228W HFX LI840 FD G5 96060191MAXIBATTEN 135 DIFFUSED LI840 FD G5 2.7 96039538 MAXIBATTEN DIFF 135W HFD LI840 FD G5 2.7 96062624MAXIBATTEN 214 DIFFUSED LI840 FD G5 2.3 96040263 MAXIBATTEN 228 DIFFUSED LI840 FD G5 2.8 96040265 MAXIBATTEN 235 DIFFUSED LI840 FD G5 3.1 96040267 MAXIBATTEN DIFF 254W HFX LI840 FD G5 96060192Emergency versionsMAXIBATTEN BARE 214W HF E2 LI840 FD G13 2.4 96059337MAXIBATTEN DIFF 214W HF E2 LI840 FD G13 2.4 96059336MAXIBATTEN BARE 128W HF E2 LI840 FD G13 3.1 96040259MAXIBATTEN BARE 228W HF E2 LI840 FD G13 2.9 96060784MAXIBATTEN DIFF 228W HF E2 LI840 FD G13 3.0 96060261Dispersive reflector MAXIBATTEN 114 DISPERSIVE REFLECTOR 96039558MAXIBATTEN 128 DISPERSIVE REFLECTOR 96039559MAXIBATTEN 135 DISPERSIVE REFLECTOR 96039560MAXIBATTEN 214 DISPERSIVEREFLECTOR 96043173MAXIBATTEN 228 DISPERSIVE REFLECTOR 96043174MAXIBATTEN 235 DISPERSIVE REFLECTOR 96043175Wire guard MAXIBATTEN 114 BARE WIREGUARD 96039583MAXIBATTEN 128 BARE WIREGUARD 96039584MAXIBATTEN 135 BARE WIREGUARD 96039585MAXIBATTEN 214 BARE WIREGUARD 96040564MAXIBATTEN 228 BARE WIREGUARD 96040565MAXIBATTEN 235 BARE WIREGUARD 96040566HFD - Digital Dimming (DSI), HFX - Digital Dimming (DALI)

Wattage Length14W 57828W 117835W 1478

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Mandi

L

80 L entraxeT5 14W 654 499T5 24W 654 499T5 39W 954 799

77

51

2xØ19

110

entraxe

A wide range of competitive fluorescent luminaires with opal diffusers for surface mounting

•BathroomLuminairewithsmooth curved diffuser to avoid water retention on top surface

•Integratedsocketinendcap

•Goodchoiceoflampsandlengths to cover different applications

•Easytoinstall

•Easytochangelamp without tools

Materials/Finish Body in grey polycarbonate with opal polycarbonate diffuser.

Installation/Mounting Ø19mm cable entry in the centre of the spine. Knock out holes in end caps. Piano key terminal block 3x2x2.5mm².

Specification To specify state: Surface mounted Fluorescent batten with smooth curved diffuser to avoid water for 14/24/39W T16 linear fluorescent lamps. As Thorn Mandi.

T16 (FD) G5 14-39W AS/NZS60598 Class II Electrical IP44

Ordering Guide Supplied complete with 830 lamp.

Description Ilcos Code Socket Wt (kg) SAP Code MANDI 1X14W T16 830 CLII GRY FD G5 1.0 96205544MANDI 1X14W T16 830 CLII WHI FD G5 1.0 96205525MANDI 1X14W T16 830 SW CLII GRY FD G5 1.0 96205545MANDI 1X14W T16 830 SW CLII WHI FD G5 1.0 96205526MANDI 1X24W T16 830 CLII GRY FD G5 1.0 96205548MANDI 1X24W T16 830 SW CLII GRY FD G5 1.0 96205549MANDI 1X39W T16 830 CLII GRY FD G5 1.3 96205551MANDI 1X39W T16 830 SW CLII GRY FD G5 1.3 96205552HFD - Digital Dimming (DSI), HFX - Digital Dimming (DALI)



Bikini

A compact miniature enclosed fluorescent batten. Available in diffused mains voltage 240V AC or diffused 12V DC

•Suitableforgeneralandsupplementary task lighting, kitchens, studies, bathrooms, cabinets, pelmets, work benches, cupboards, wardrobes and over mirrors

•12VDCmodelsaresuitablefor recreational vehicles, boats and campervans

•Injectionmouldedwhitebodywith ribs for rigidity

•Doubleinsulationforincreasedsafety

Materials/Finish Body: injection moulded polycarbonate, white. Diffuser: impact resistant prismatic polycarbonate.

Installation/Mounting For installation in normal dry indoor atmospheres.

Specification To specify state: Compact miniature fluorescent batten complete with lamp, for 8/13W T16 linear fluorescent lamps. White injection moulded polycarbonate body and one piece polycarbonate prismatic diffuser. As Thorn Bikini.

63

37

47

66

Bikini diffused batten

Wattage Lengths

8W 300

13W 540

T16 (FD) G5 8-13W AS/NZS 60598 Class II Electrical IP20

Ordering Guide Supplied complete with 4100K lamp.Description Socket Wt (kg) SAP Code Bikini BattenBIKINI 1X8W 4100K G5 0.6 96028477BIKINI 1X8W WITH SWITCH 4100K G5 0.6 96028478BIKINI 1X13W 4100K G5 0.6 96028479BIKINI 1X13W WITH SWITCH 4100K G5 0.6 96028480Bikini Diffused BattenBIKINI DIFF 1X8W 4100K G5 0.6 96028481BIKINI DIFF 1X8W WITH SWITCH 12V 4100K G5 0.6 96028482BIKINI DIFF 1X8W WITH SWITCH 4100K G5 0.6 96028484BIKINI DIFF 1X13W 4100K G5 0.7 96028485BIKINI DIFF 1X13W WITH SWITCH 12V 4100K G5 0.7 96028486BIKINI DIFF 1X13W WITH SWITCH 4100K G5 0.7 96028488

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II

Continuous row system for easy and quick tool-free installation

1. After the suspension element is fixed to the ceiling (wire suspension shown on this example), the trunking simply snaps onto the brackets.

2. Just a simple push and the pre-wired trunking is securely installed. Tool-free electrical and mechanical connection has been made between trunkings, due to its patented connector system.

3. Convenient phase selection inside the luminaire.

4. Easy positioning and tool-free installation of the luminaire.

5. Electrical and mechanical connection by one single operation – just rotating the turnbuckle.

6. Optics can now be installed via a simple snap-on mechanism.

7. Just press the optic towards the system and the spring-loaded fixation mechanism retains it immediately.

8. After attaching reflector end caps and couplers are put on, lamps can be fitted.

9. Various louvres or optics can be conveniently added without the use of any tools.

10. Congratulations – you have just completed your first Primata II installation!.

1

2

3 4

5 6 7

8 9 10

Each component of a Primata II installation is pre-built in the factory. Work on site is simply a matter of snapping the modules together. Untrained personnel can do this using their two-hands.Notoolsarerequiredand rates of installation and productivity are impressive.



Primata II Electrical configuration

Electrical safety Primata II uses dedicated connectors to achieve perfect electrical connections with optimum safety. There are no complicated electrical connections and no terminal blocks between luminaires and wiring. The turnbuckle mechanism ensures that once a connection is made, it stays secure.

Standards Designed and manufactured to comply with AS/NZS 60598 Class I electrical IP20 IP40 with IP40 kit IP60 Industrial fitting

L1

L2

L3

N

E

LUMINAIRE HF

D1

D2

L1

L2

L3

N

E

LUMINAIREHFD

5-pole 5-poles configured for three-phase operation: Primata II supports ‘load sharing’ to triple the maximum length of a continuous run, compared to standard single-phase environments. This is possible because each phase can be used to maximum loading. In addition, Primata II provides separate circuits which can be switched independently for very basic lighting control.

7-pole 7-poles configured for three-phase operation: Primata II enhances 5-pole capabilities by supporting additional dimming(HFD). Emergency lighting options are available onspecialrequest.

*Electrical connection to the system if phase 2 or 3 selected

SPA

R D

ecep

tion

Bay,

QLD

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II Brackets and Suspension

Flexible and versatile continuous row lighting system for commercial and industrial applications

Fixing brackets

•Allfixingbracketsattach tool-free to the trunking via a snap-on mechanism and a common stainless-steel quick-fixbracket

•Directceilinginstallation

•Caddyclipbracketforfastening on exposed ceiling carrier systems of 24mm - 26mm

•Chainsuspensionbrackets,adjustable (FIX/CHA) and non adjustable triangle (FIX/CH) and galvanised suspension chain (CH) which is supplied in metres

•Maximumdistancebetweensuspension brackets is 3 metres

•Chainsuspensionbracketsforangled installation, to allow axial rotation

•Wiresuspensionkitsinthreedifferent lengths for tool-free height adjustment via clutch mechanism

•Catenarywiresuspensionfor catenary wires up to 12mm diameter

Specification To specify state: Fixing bracket for trunking systems. As Thorn Primata II.

Direct ceiling installation Caddy clip

Adjustable chain suspensionChain suspension bracket

Suspension chain (per metre)

Wire suspension kit Catenary wire suspension

Bracket for angled installation

Brackets and Suspension Ordering GuideDescription SAP CodeDirect Ceiling Installation ClipPR2 FIX 96502601Caddy ClipPR2 FIX/CAD 96502602Chain suspensionPR2 FIX/CH CHAIN SUSPENSION BRACKET 96502603PR2 FIX/CHA ADJUSTABLE CHAIN SUSPENSION BRACKET 96502604PR2 CH SUSPENSION CHAIN (PER METRE) 96502605PR2 FIX/CHRA BRACKET FOR ANGLED INSTALLATION (FOR AXIAL ROTATION) 96502606Wire suspension kitsPR2 MSW1 1000 1M WIRE SUSPENSION 96502607PR2 MSW1 2000 2M WIRE SUSPENSION 96502608PR2 MSW1 5000 5M WIRE SUSPENSION 96502609Catenary wire suspensionPR2 FIX/CAT* 96502610*For catenary wires up to 12mm diameter



Trunking

Flexible and versatile continuous row lighting system for commercial and industrial applications

51

60

1175/2350/35251475/2950/4425

51

60

1226/2452/36781526/3052/4578

Pre-wired trunking •Pre-wiredtrunkingwith

5 or 7-pole wiring integrated

•Wires in 2.5mm2

•Electricalconnectionpointsinmodular distance for 36 or 58 or 28/54 or 35/49/80W

•Tool-freeconnectionwith uniqueconnector(trunkingcoupler to be ordered separately)

Pre-wired Trunking Ordering GuideDescription Wt (kg) SAP Code5-poleModular length for 1 fittingPR2 T TW 1226 5X2,5/36 1.8 96502611PR2 T TW 1526 5X2,5/58 2.2 96502612PR2 T TW 1175 5X2,5/28/54 1.8 96502613PR2 T TW 1475 5X2,5/35/49/80 2.2 96502614Modular length for 2 fittingsPR2 T TW 2452 5X2,5/36 3 96502623PR2 T TW 3052 5X2,5/58 3.8 96502624PR2 T TW 2350 5X2,5/28/54 3 96502625PR2 T TW 2950 5X2,5/35/49/80 3.8 96502626 Modular length for 3 fittingsPR2 T TW 3678 5X2,5/36 4.2 96502635PR2 T TW 4578 5X2,5/58 5.4 96502636PR2 T TW 3525 5X2,5/28/54 4.2 96502637PR2 T TW 4425 5X2,5/35/49/80 5.4 965026387-PoleModular length for 1 fittingPR2 T TW 1226 7X2,5/36 2.0 96502615PR2 T TW 1526 7X2,5/58 2.5 96502616PR2 T TW 1175 7X2,5/28/54 2.0 96502617PR2 T TW 1475 7X2,5/35/49/80 2.5 96502618Modular length for 2 fittingsPR2 T TW 2452 7X2,5/36 3.5 96502627PR2 T TW 3052 7X2,5/58 4.4 96502628PR2 T TW 2350 7X2,5/28/54 3.5 96502629PR2 T TW 2950 7X2,5/35/49/80 4.4 96502630Modular length for 3 fittingsPR2 T TW 3678 7X2,5/36 4.9 96502639PR2 T TW 4578 7X2,5/58 6.3 96502640PR2 T TW 3525 7X2,5/28/54 4.9 96502641PR2 T TW 4425 7X2,5/35/49/80 6.3 96502642

Materials/FinishTrunking: roll-formed sheet steel pre-painted white.

Installation/MountingTrunking prepared for easy mechanical and electrical connection.

SpecificationTo specify state: 5 or 7-pole, 2.5mm2, pre-wired trunking with electrical connection points in modular distance for use with trunking system. As Thorn Primata II T TW.

Un-wired trunking •Un-wiredtrunkingforinstalling

other Primata II accessories or different luminaires

•Tool-freeconnectionwithuniqueconnector(tobe ordered separately)

Specification To specify state: Unwired trunking. As Thorn Primata II T.

Un-wired Trunking Ordering Guide(For complete luminaire follow ordering steps 1-5)

T16 trunking

T26 trunking

Description Wt (kg) SAP CodePR2 T 1526 1.6 96502651PR2 T 3052 3.2 96502652PR2 T 4578 4.8 96502653

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II Trunking Accessories

58

300

86

58

243

399

86

58

243

243

58

86

399

399

Cover strip

•Plasticcoverstripinluminairelengthtoallowmodular installation on pre-wired trunking (gaps in luminaires)

•Tool-freeandeasyassembling

Specification To specify state: Plastic cover strip in modular length. As Thorn Primata II CF.

Trunking end cap

•Whiteplasticendcapsfortrunkingendstoprovideneatappearance and perfect alignment


•Knock-outholesforcableentry

Specification To specify state: Plastic end-cap for trunking system. As Thorn Primata II ECP.

Trunking couplers

•Couplerformechanicaltool-freeconnectionoftrunking

•90°L,TandXcouplersformechanicaltool-freeconnection of trunking

Materials/Finish Coupler: galvanised steel with plastic cover (L, T and X only).

Installation/Mounting Couplers for mechanical connection of trunking without the use of any tools.

Specification To specify state: Trunking coupler (or L, T, X coupler) for trunking system. As Thorn Primata II T-C (L, T, X).

Note: When ordering the L, T and X coupler together with reflectors and optics, then you must order the relevant trunking coupler kit, please see ordering guide on page 336.

Grommet

•Rubbergrommettouseonknock-outsattheback of the trunking to protect cable

Specification To specify state: Rubber grommet for trunking system. As Thorn Primata II GRM.



58

243

450

86

Mains terminal – Electrical feed

•Powerfeedforelectricalconnectionfor 5 and 7-pole pre-wired trunking

•Plug-interminalsformainspowersupply, dimming and emergency

•For5-poleor7-poleinconjunctionwithdimming, use PR2 TB/TRU 5/7 DIM

•For7-poleinconjunctionwithemergencyuse PR2 TB/TRU 5/7 EM

Specification To specify state: Electrical feed for 5 and 7-pole pre-wired trunking for trunking systems. As Thorn Primata II TB/TRU.

Cable Fixings

•Cablecleattofixadditionalinternalwiring(CC)

•Cablecliptosecureadditionalcablesontop of the trunking (TCC)

Ordering GuideDescription Wt (Kg) SAP CodeTrunking CouplersPR2 T-C TRUNKING COUPLER 0.3 96502654PR2 T-CL L CONNECTOR 0.5 96502655PR2 T-CT T CONNECTOR 0.7 96502656PR2 T-CX X CONNECTOR 0.7 96502657Trunking EndcapsPR2 ECP - 96502664GrommetPR2 GRM - 96502663Cover StripPR2 CF 36 0.2 96502643PR2 CF 58 0.2 96502665PR2 CF 28/54 0.2 96502645PR2 CF 35/49/80 0.2 96502666Mains terminal block for 5 and 7-polePR2 TB/TRU 5/7 DIM - 96502658PR2 TB/TRU 5/7 EM - 96502660Cable fixingsPR2 CC CABLE CLEAT (INSIDE TRUNKING) - 96502661PR2 TCC CABLE CLIP (ON TOP OF TRUNKING) - 96502662

Description Wt (Kg) SAP CodeTrunking Coupler KitsPR2 T-CL KIT TRUNKING L COUPLER KIT - 96233756PR2 T-CT KIT TRUNKING T COUPLER KIT - 96233757PR2 T-CX KIT TRUNKING X COUPLER KIT - 96233758

TCC

CC

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II T16 (T5) Luminaires

Description ILCOS Code Socket Wt (Kg) SAP CodeHigh FrequencyPR2 1/28W T16 HF FDH G5 0.9 96502704PR2 1/35W T16 HF FDH G5 1.0 96502705PR2 1/49W T16 HF FDH G5 1.0 96502706PR2 1/54W T16 HF FDH G5 1.0 96502707PR2 1/80W T16 HF FDH G5 1.1 96502708PR2 2/28W T16 HF FDH G5 1.1 96502709PR2 2/35W T16 HF FDH G5 1.2 96502710PR2 2/54W T16 HF FDH G5 1.1 96502711PR2 2/49W T16 HF FDH G5 1.2 96502712PR2 2/80W T16 HF FDH G5 1.2 96502713High Frequency DimmablePR2 1/28W T16 HFD FDH G5 1.0 96502732PR2 1/35W T16 HFD FDH G5 1.1 96502733PR2 1/49W T16 HFD FDH G5 1.1 96502734PR2 1/54W T16 HFD FDH G5 1.1 96502735PR2 1/80W T16 HFD FDH G5 1.2 96502736PR2 2/28W T16 HFD FDH G5 1.2 96502737PR2 2/35W T16 HFD FDH G5 1.3 96502738PR2 2/54W T16 HFD FDH G5 1.2 96502739PR2 2/49W T16 HFD FDH G5 1.3 96502740PR2 2/80W T16 HFD FDH G5 1.3 96502741HF-HighFrequency,HFD-HighFrequencyDimmableDSI,HFX-HighFrequencyDimmableDALI(availableonrequest)

42 9 16

60

T16 single/twin luminaireT16 (T5) twin luminaire

T16 (T5) single luminaireT16 (T5) Luminaire Ordering Guide Lamp(s) to be ordered separately.

•Availableinsingleandtwinlamp (narrow) versions, where both versions can mostly use the same optic

•High-frequencyballasts

•Modulardesignaccommodatesoptions for lighting management and emergency lighting (optional)

•Simplephaseselectionforpower supply and dimming circuits

•Tool-freeinstallation

•Thornturnbucklesensureelectrical and mechanical connection in one step

•Emergencyoptionsavailableonrequest

Materials/Finish Body: pre-painted white roll-formed sheet steel. Lamp holder: injection moulded white plastic.

Installation/Mounting Luminaire prepared for easy installation into pre-wired trunking, luminaire attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket system, phase selection at connector, optics easily clipped ontoluminaireifrequired.

Specification To specify state: Single or twin (narrow) 28-80W T16 (T5) linear fluorescent luminaire for use with 5 or 7-pole Primata trunking system and optics. As Thorn Primata II T16 (T5) luminaire.

T16 (FDH) G5 28-80W AS/NZS 60598 Class I Electrical IP20



Primata II T26 (T8) Luminaires

53

60 136

53

•Singleandtwinlampversions – can be used with dedicated optics


•Modular design accommodates options for lighting management and emergency lighting (optional)

•Simplephaseselectionforpower supply and dimming circuits


•Thornturnbucklesensureelectrical and mechanical connection in one step

•Emergencyoptionsavailableonrequest

Description Ilcos Code Socket Wt (Kg) SAP CodeHigh FrequencyPR2 1/36W T26 HF FD G13 1.2 96502682PR2 1/58W T26 HF FD G13 1.3 96502683PR2 2/36W T26 HF FD G13 1.5 96502684PR2 2/58W T26 HF FD G13 1.7 96502685High Frequency DimmablePR2 1/36W T26 HFD FD G13 1.5 96502694PR2 1/58W T26 HFD FD G13 1.7 96502695PR2 2/36W T26 HFD FD G13 1.8 96502696PR2 2/58W T26 HFD FD G13 2.0 96502697

T26 (FD) G13 36-58W AS/NZS60598 Class I electrical IP20

T26 (T8) twin luminaireT26 single luminaire T26 twin luminaire

T26 (T8) single luminaire

Luminaires Ordering Guide Lamp(s) to be ordered separately.

Materials/Finish Body: roll-formed sheet steel pre-painted white. Lamp holder: injection moulded white plastic.

Installation/Mounting Luminaire prepared for easy installation into pre-wired trunking. Luminaire attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket. System phase selection at connector. Optics easily clipped ontoluminaire,ifrequired.

Specification To specify state: Single or twin 36-58W T26 (T8) linear fluorescent luminaire for use with 5 or 7-pole trunking system and optics. As Thorn Primata II T26 (T8) luminaire.

HF-HighFrequency,HFD-HighFrequencyDimmable(DSI),HFX-HighfrequencydimmableDALIavailableonrequest

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II White reflectors

•Suitable for T16 (T5) and T26 (T8) single and twin lamp luminaires

•White plastic couplers and end caps provide neat appearance and perfect alignment

•Ideally suited to low mounting in industrial or utility areas whichrequirehighlevelsofuniform light

•Asymmetric reflectors for illumination of vertical surfaces

Coupler for R and RLW • White plastic coupler for

reflector PR2 R and PR2 RLW to provide neat appearance and perfect alignment

• Simple, tool-free assembly

•One pair needed per junction

End cap for R and RLW • White plastic end cap for

reflector PR2 R and PR2 RLW to provide neat appearance and perfect alignment


• One pair needed per housing or uninterrupted continuous run

End cap for RA • White plastic end caps for

reflector PR2 RA to provide neat appearance


•One pair needed per housing

White Reflectors Ordering GuideDescription Wt (kg) SAP CodeWhite ReflectorFor use with single T26 (T8) luminairesPR2 R 1X36 1.2 96502754PR2 R 1X58 1.5 96502755For use with twin T26 (T8) luminairesPR2 R 2X36 1.7 96502756PR2 R 2X58 2.1 96502757For use with single or twin T16 (T5) luminairesPR2 R 1/2X28/54 1.1 96502758PR2 R 1/2X35/49/80 1.4 96502759White Reflector with white louvresFor use with single T26 (T8) luminairesPR2 RLW 1X36 2.4 96502760PR2 RLW 1X58 2.9 96502761For use with twin T26 (T8) luminairesPR2 RLW 2X36 3.6 96502762PR2 RLW 2X58 4.5 96502763For use with single or twin T16 (T5) luminairesPR2 RLW 1/2X28/54 2.3 96502764PR2 RLW 1/2X35/49/80 2.8 96502765Coupler for R and RLWPR2 R-C 1XT26 1/2XT16 PAIR 96502844PR2 R-C 2XT26 PAIR 96502845End Cap for R and RLWPR2 R-EC 1XT26 1/2XT16 PAIR 96502846PR2 R-EC 2XT26 PAIR 96502847White Asymmetric ReflectorFor use with single T26 (T8) luminairesPR2 RA 1X36 1.4 96502766PR2 RA 1X58 1.8 96502767For use with single or twin T16 (T5) versionsPR2 RA 1/2X28/54 1.3 96502768PR2 RA 1/2X35/49/80 1.7 96502769End Cap for RAPR2 RA-EC PAIR 96502848** One pair needed per housing or uninterrupted continuous run

Materials/FinishReflector: sheet steel, white pre-painted finish. End caps and couplers: injection moulded white finish.

Installation/MountingUnique‘snap-in’mechanismenables easy tool-free installation onto luminaire.

Specification – white reflectorTo specify state: White reflector for single or twin T16 (T5) and T26 (T8) luminaire for use with trunking system. As Thorn Primata II R.

Specification – white reflectorwith louvre. To specify state: White reflector with white louvre grille for single or twin T16 (T5) and T26 (T8) luminaire for use with trunking system. As Thorn Primata II RLW.

Specification – asymmetricreflector. To specify state: White asymmetric reflector for single/twin T16 (T5) or single T26 (T8) luminaire for use with trunking system. As Thorn Primata II RA.

Couplers for R and RLW

End caps for R and RLW

End caps for RA



T26 (T8) white reflector, single

T26 (T8) white reflector, twin

T26 (T8) white reflector with white louvre, single

T26 (T8) white reflector with white louvre, twin

T16 (T5) white reflector, single or twin

T16 (T5) white reflector with white louvre, single or twin

T16 (T5) asymmetric white reflector, single or twin

164

58

51

274

58

51

170

80

51

274

58

51

58

51

164

87

51

87

58

51

164

87

51

87

T26 (T8) asymmetric white reflector, single

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II Aluminium reflectors

Materials/Finish Reflector: roll-formed aluminium Mirrorbrite finish.

Installation/Mounting Reflector clips easily and tool-free onto luminaire via stainless steel bracket. Reflectors designed to overlap, ensuring perfect fit and alignment.

Aluminium Reflector Ordering GuideDescription Wt (Kg) SAP CodeAluminium Reflector Wide BeamFor use with single T26 (T8) luminairesPR2 WB 1X36 0.6 96502770PR2 WB 1X58 0.7 96502771For use with twin T26 (T8) luminairesPR2 WB 2X36 0.7 96502772PR2 WB 2X58 0.8 96502773For use with single or twin T16 (T5) luminairesPR2 WB 1/2X28/54 0.6 96502774PR2 WB 1/2X35/49/80 0.7 96502775Aluminium Reflector Narrow BeamFor use with single T26 (T8) luminairesPR2 NB 1X36 0.7 96502776PR2 NB 1X58 0.8 96502777For use with twin T26 (T8) luminairesPR2 NB 2X36 0.8 96502778PR2 NB 2X58 0.9 96502779For use with single or twin T16 (T5) luminairesPR2 NB 1/2X28/54 0.7 96502780PR2 NB 1/2X35/49/80 0.8 96502781Aluminium WallwasherFor use with single T26 (T8) luminairesPR2 WA 1X36 0.6 96502782PR2 WA 1X58 0.7 96502783For use with single or twin T16 (T5) luminairesPR2 WA 1/2X28/54 0.6 96502784PR2 WA 1/2X35/49/80 0.7 96502785

Specification – wide beam To specify state: Wide beam Mirrorbrite aluminium reflector for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II WB.

Specification – narrow beam To specify state: Narrow beam Mirrorbrite aluminium reflector for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II NB.

Specification – wallwasher To specify state: Wallwasher Mirrorbrite aluminium reflector for single/twin T16 (T5) and single T26 (T8) luminaires for use with trunking system. As Thorn Primata II WA.

•Suitable for T16 (T5) and T26 (T8) single and twin lamp luminaires

•One-piece aluminium reflector in Mirrorbrite finish provides excellent optical control

•Reflectors overlap to provide visually continuous system, no need for separate end caps or couplers

•Ideally suited to high mounting in industrial and lower retail areas with demanding visibility requirements

•Wall washer for uniform vertical illumination



76

129

51

78

239

51

72

113

51

96

175

51

92 50

51

141 215

110

51

315

85

51

115

66

240

51

T16 (T5) aluminium wide beam reflector, single or twin

T16 (T5) aluminium narrow beam reflector, single or twin

T26 (T8) aluminium wide beam reflector, single

T26 (T8) aluminium wide beam reflector, twin

T26 (T8) aluminium narrow beam reflector, single

T26 (T8) aluminium reflector, wallwasher, single

T26 (T8) aluminium narrow beam reflector, twin

T16 (T5) aluminium reflector, wallwasher, single or twin

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II Basic housing with mirror optics

Materials/Finish Housing: sheet steel, white pre-painted.Integrated reflector: roll-formed Satinbrite aluminium. End caps and couplers: injection moulded white plastic.

Installation/Mounting Unique‘snap-in’mechanismenables easy tool-free installation onto luminaire.

•SuitableforT16(T5)and/or T26 (T8) single and twin lamp luminaires

•Choiceofwide,asymmetricor double-sided asymmetric reflectors

•Whiteplasticcouplersandend caps available to provide neat appearance

•Idealsolutionsforsupermarkets and hyper-markets applications and shelf lighting

Basic housing with mirror optics Ordering GuideDescription Wt (Kg) SAP CodeBasic housing with wide beam opticsFor use with single T26 luminairesPR2 HWB 1X36 2.5 96502792PR2 HWB 1X58 3.0 96502793For use with twin T26 luminairesPR2 HWB 2X36 3.4 96502794PR2 HWB 2X58 4.3 96502795For use with single or twin T16 luminairesPR2 HWB 1/2X28/54 2.0 96502796PR2 HWB 1/2X35/49/80 2.4 96502797Basic housing with asymmetric mirror optics (single T26 only)PR2 HA 1X36 2.5 96502798PR2 HA 1X58 3.0 96502799Basic housing with double sided asymmetric mirror (twin T26 only)PR2 HAD 2X36 3.4 96502800PR2 HAD 2X58 4.3 96502801

Specification – wide beam To specify state: White basic housing with integrated wide beam Satinbrite aluminium reflector for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II HWB.

Specification – asymmetric To specify state: White basic housing with integrated asymmetric Satinbrite aluminium reflector for single T26 (T8) luminaires for use with trunking system. As Thorn Primata II HA.

Specification – double sided asymmetric. To specify state: White basic housing with integrated double-sided asymmetric Satinbrite aluminium reflector for twin T26 (T8) luminaires for use with trunking system.

As Thorn Primata II HAD.



66

113

51

173

95

283

95

51

173

95

51

283

95

51

T16 (T5) wide beam mirror, single or twin

T26 (T8) wide beam mirror, single

T26 (T8) double sided asymmetric mirror, twin

T26 (T8) wide beam mirror, twin

T26 (T8) asymmetric mirror, single

Coupler for basic housing optics

•Whiteplasticcouplerforall basic housing optics to provide neat appearance and perfect alignment

•Simple,tool-freeassembly

•Onepairneededperjunction

End cap for basic housing optics

•Whiteplasticendcapsforall basic housing optics to provide neat appearance and perfect alignment


•Onepairneededperhousingor uninterrupted continuous run

Basic housing accessories Ordering GuideDescription SAP CodeCoupler for all basic housing optics (one pair needed per junction)For use with single T26 versionsPR2 H-C 1XT26 PAIR 96502849For use with twin T26 versionsPR2 H-C 2XT26 PAIR 96502850For use with single or twin T16 versionsPR2 H-C 1/2XT16 PAIR 96502851Endcaps for all basic housing optics (one pair needed per housing or uninterrupted continuous run)For use with single T26 versionsPR2 H-EC 1XT26 PAIR 96502852For use with twin T26 versionsPR2 H-EC 2XT26 PAIR 96502853For use with single or twin T16 versionsPR2 H-EC 1/2XT16 PAIR 96502854

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II Basic housing with louvre optics

•SuitableforT16(T5)and T26 (T8) single and twin lamp luminaires

•Choiceofwhitepaintedsteel,perforated white steel or Satinbrite aluminium louvres to control glare

•Satinbritelouvrescomplywithguidelines for modern VDT screens (depending on the wattage used with the optic)

•Whiteplasticcouplersandend caps available to provide neat appearance

•Ideallysuitedtoretail,commercial and production areas with VDT screens

•Microperforatedversionscreate a more comfortable environment with additional ambient lighting

Materials/Finish Housing: sheet steel, white pre-painted with roll-formed aluminium reflector inserts.Louvre: Satinbrite aluminium or white painted steel or perforated.End caps and couplers: injection moulded white plastic.

Basic housing with louvre optics Ordering GuideDescription Wt (Kg) SAP CodeBasic housing with Satinbrite louvresFor use with single T26 (T8) luminairesPR2 HLS 1X36 2.7 96502814PR2 HLS 1X58 3.4 96502815For use with twin T26 (T8) luminairesPR2 HLS 2X36 3.8 96502816PR2 HLS 2X58 4.6 96502817For use with single or twin T16 (T5) luminairesPR2 HLS 1/2X28/54 2.0 96502818PR2 HLS 1/2X35/49/80 2.4 96502819Basic housing with White louvresFor use with single T26 (T8) luminairesPR2 HLW 1X36 3.2 96502802PR2 HLW 1X58 4.1 96502803For use with twin T26 (T8) luminairesPR2 HLW 2X36 5.4 96502804PR2 HLW 2X58 6.2 96502805For use with single or twin T16 (T5) luminairesPR2 HLW 1/2X28/54 2.5 96502806PR2 HLW 1/2X35/49/80 2.9 96502807Perforated basic housing with white perforated louvreFor use with single T26 (T8) luminairesPR2 HLW PF 1X36 3.1 96502808PR2 HLW PF 1X58 4.0 96502809For use with twin T26 (T8) luminairesPR2 HLW PF 2X36 5.3 96502810PR2 HLW PF 2X58 6.1 96502811For use with single or twin T16 (T5) luminairesPR2 HLW PF 1/2X28/54 2.4 96502812PR2 HLW PF 1/2X35/49/80 2.8 96502813

Installation/Mounting Uniquesnap-inmechanismenables easy tool-free installation onto luminaire.

Specification – satinbrite To specify state: White basic housing with Satinbrite louvre for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II HLS.

Specification – standard To specify state: White basic housing with white painted steel louvre for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II HLW.

Specification – perforated To specify state: White perforated basic housing with white perforated steel louvre for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II HLW PF.



66

113

51

67

113

51

66

113

51

283

95

51

173

95

51

173

95

51

283

95

51

T16 (T5) Mirrorbrite louvre, single or twin

T16 (T5) white louvre single

T16 (T5) Satinbrite louvre, single or twin

T26 (T8) Satinbrite louvre twin

T26 (T8) Mirrorbrite louvre single T26 Mirrorbrite louvre twin T26 white or perforated housing with white or perforated louvre, singleT26 white or perforated housing with white or perforated louvre, twin

T16 (T8) perforated and white perforated louvre single or twin

T26 (T8) Satinbrite louvre single

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



Primata II Optional extras

96

75

51

96

75

51

205

75

51

1175/1475 - T161226/1526 - T26

570/760

Spotlight modules

•Modulewithintegrated three-phase track in modular lengths

•Standardspotlightsfor three-phase track can be installed

•Simplephaseselectionfor power supply


•Thornturnbucklesforone-stepelectrical and mechanical connection

Materials/Finish Body: pre-painted white roll-formed sheet steel, injection moulded white plastic end parts.

Installation/Mounting Module prepared for easy installation into pre-wired trunking, unit attaches to trunking by two turnbuckles, providing instant electrical connection via fixed plug and socket system, phase selection at connector, spotlights to be installed as in any standard three-phase track system.

Specification To specify state: Three-phase track module in modular lengths, for use on 5 or 7-pole trunking system. As Thorn Primata II TM.

Fixing kit for fluorescent fittings

•Fixingkitforotherfluorescentfittings on unwired trunking (FF)

Wire guard

•SuitableforT16(T5)and T26 (T8) single and twin lamp luminaires

•Canbehingedforlampreplacement

•Formechanicallampprotection – ideal in low storage areas

Materials/Finish Rods: polished galvanised steel.Fixing brackets: aluminium.

Installation/Mounting Tool-free fixing via two aluminium brackets.

Specification To specify state: Wire guard made of polished galvanised steel for single/twin T16 (T5) and T26 (T8) luminaires for use with trunking system. As Thorn Primata II WG.

Spotlight not supplied

T26 wire guard, single

T26 wire guard, twin

T16 Wire guard, single/twin



288

74

90

167

240

99

51

4 00

2 4 6 8 10 12 14 16m

m

1.2m

2.5

Presence detector module

•Modulewithanintegratedpresence detector

•Switchingcapacity 1200 - 2000W

•Surveillancerange:220°

•MaxDistance:16metres

•6timestagesfrom1sec.up to approx. 8mins


Materials/Finish Body: pre-painted white roll-formed sheet steel, injection moulded white plastic end parts.

Installation/Mounting Module prepared for easy installation onto trunking, electrical connection via piano key terminal block.

Specification To specify state: Presence detection module for use on trunking system. As Thorn Primata II SLDP.

Industrial unit IP60

•Completesingleortwin58Wfitting (no separate luminaire needs to be ordered)


•Integratedaluminiumreflector for symmetrical or asymmetrical distribution

•IP60(dust-tight)protectedlamp/reflector area to avoid a decrease in LOR due to dust

•Convenienttool-freephase selection

•Plasticcoverpanel(PC)held by galvanised frame

•One-stepelectricalandmechanical connection via external turnbuckle

•Idealsolutionfordustyindustrial applications and automotive industry

Materials/Finish Housing: white painted sheet steel with plastic cover panel (polycarbonate) held by galvanised metal frame.

Installation/Mounting Tool-free installation onto trunking system via external turnbuckle mechanism.

Specification To specify state: Complete 1/2x58W luminaire, highfrequencyballast,IP60,integrated aluminium reflector for symmetrical/asymmetrical distribution, polycarbonate cover panel held by galvanised frame for tool-free installation for use with trunking system. As Thorn Primata II I PC.

Optional Extras Ordering GuideDescription Wt (Kg) SAP CodeWire GuardsFor use with single T26 luminairesPR2 WG 1X36 1.1 96502838PR2 WG 1X58 1.5 96502839For use with twin T26 luminairesPR2 WG 2X36 1.7 96502840PR2 WG 2X58 1.9 96502841For use with single or twin T16 luminairesPR2 WG 1/2X28/54 1.0 96502842PR2 WG 1/2X35/49/80 1.4 96502843

Industrial Optic Ordering Guide complete fitting – no separate luminairerequired.T26(T8)Lampstobeorderedseparately.Description Ilcos Code Socket Wt (Kg) SAP CodeSymmetricPR2 I PC 1X58W HF SYM IP60 FD G13 7.9 96502826PR2 I PC 2X58W HF SYM IP60 FD G13 8.2 96502828AsymmetricPR2 I PC 2X58W HF ASYM IP60 FD G13 7.9 96502829PR2 I PC 1X58W HF ASYM IP60 FD G13 8.2 96502827

Description Wt (Kg) SAP CodeSpotlight modules3-PHASE MODULE 1226 PR2 TM 36 1.2 965026313-PHASE MODULE 1526 PR2 TM 58 1.5 965026713-PHASE MODULE 1175 PR2 TM 28/54 1.1 965026333-PHASE MODULE 1475 PR2 TM 35/49/80 1.4 96502672PRESENCE DETECTOR MODULE PR2 SLDP 0.7 96502673FIXING KIT FOR OTHER FLUORESCENT FITTINGS PR2 FF 96502667

IND

OO

R C

OM

MER

CIA

L LIG

HTI

NG

FLU

ORE

SCEN

T BA

TTEN

S A

ND

TRU

NKI

NG

SYS

TEM

S



IGA

, Sta

fford

, QLD

Documents

Thorn - Fluorescent Battens and Trunking Systems