Upload
others
View
9
Download
2
Embed Size (px)
Citation preview
PROGNOST®-NT V18Enhancements to Version 17
Automated Reports User-friendlinessSoftware Upgrade
Why upgrade your software?
It is essential that the monitoring technology of your rotating
equipment is always up to date. The annual Upgrade of your
PROGNOST®-NT software delivers all advantages of our ongo-
ing product developments.
In this brochure, we will introduce you to all of our important
innovations and feature enhancements which will help you
carry out your monitoring tasks faster and more effectively.
Please note: Some new functions require appropriate system
capabilities. If you are using older Monitoring Units, some
new functions may have to be deactivated or may only be
used to a limited extent.
All Upgrades at a glance
User benefits
Enhancements to improve the ease of use of your
PROGNOST®-NT software.
Automated compilation of meaningful reports
Machine Protection Report
Cylinder Diagnostic Report
Optimized diagnostics for Rider Ring Wear
New quick access functions via context menus
Seperate entry for filtered signal
Optimized User-friendliness
System improvements
Enhancements for ensuring IT security and future usability of
the PROGNOST®-NT system.
Enhanced system performance
Software version for 64 Bit operating systems
New system requirements
Overview of the automatically generated reports with indication
of affected components
Automated compilation of meaningful reports
Beginning in Version 16, the first step of this integration was
done with the Condition Reports. Those manually generated
reports are supplemented in Version 18 with the automated
compiled Machine Protection and Cylinder Diagnostic
Reports. The data and analyses behind these reports are
based on decades of monitoring expertise of the PROGNOST
Systems experts.
Differences between both types of reports are the type of
request and the structure. To avoid overloading the Monitor-
ing Unit data storage, a maximum limit of 200 reports per
category is set as default. When the limit is exceeded, the
oldest reports will be deleted and substituted with the new-
est.
Machine Protection Reports
The automated creation of Machine Protection Reports is
initiated by a Safety Limit violation (ALERT or SHUTDOWN).
Contents of the report are possible causes of the ALERT/
SHUTDOWN. Also the online signal together with the
analysis of the last three revolutions of the critical signal are
included. This provides all information to efficiently inspect
and replace the affected component. The report is also a
failure record to be saved locally and forwarded by mail as a
PDF file.
Cylinder Diagnostic Report
The Cylinder Diagnostic Report is triggered manually. The
report lists all important performance details and shows also
the individual p-V diagram analysis of each compression
chamber. Users receive a complete overview of the main
performance figures and findings. Detected failures such as
valve failures or packing leakages are pinpointed based on
the PROGNOST® pattern recognition technology.
Separate entry for filtered signal
The result of a filtered signal is from now shown as own
signal line and list entry in the online-view. It will be updated
automatically with the signals and is available until the
online-view is closed or a new filtering for the source signal
is done.
New quick access functions with context menus
A few function is available via the machine tree and the
online-view to enhance the software usability. This is espe-
cially usefull for the following points.
Open 3D waterfall plot via machine tree
Open online p-V diagram via machine tree
Show inertia load in the online-view
Optimized diagnostics for Rider Ring Wear
New function to straighten the trend plot of the Rider Ring
Wear analysis and generate a separate trend line. This ad-
ditional trend line allows a convenient monitoring. This deliv-
ers closer inspection details to set more acurate warning
thresholds for the Rider Ring Wear diagnostics.
Trend of Rider Ring Wear
Machine Measuring Point Data name TAG-Name Value Unit11KB201 V Cor. P2 Vib. cross head slide 11XT_113 0.02747 g11KB201 V Cor. P2, Filt Filt 11XT_113 -0.1160 g
Machine Measuring Point Data name TAG-Name Value Unit11KB201 V Cor. P2 Amplitude spectrum 11XT_113 0.00076 g11KB201 V Cor. P2, Filt Amplitude spectrum 11XT_113 0.001�3 g
-2�
-20
-1�
-10
-�
0
�
10
1�
20
27g
0 1� 30 4� 60 7� �0 10� 120 13� 1�0 16� 1�0 1�� 210 22� 240 2�� 270 2�� 300 31� 330 � CA 360
TDC BDC TDC �n line
0.00
0.0�
0.10
0.1�
0.20
0.2�
0.30
0.3�
0.42g
0.00 0.30 0.60 0.�0 1.20 1.�0 1.�0 2.10 2.40 2.70 3.00 3.30 3.60 3.�0 4.20 4.�0 4.�0 �.10 �.40 �.70 6.00 6.30 ��� 6.�0
FFT Anal�sis
Enhanced system performance
Growing demands regarding the visualization software are
a result of changing operating systems and new computer
generations.
This effects two major changes within the VISU 18 software.
Software Version for 64 Bit operating systems
Starting with version 18 a own software version for 64 Bit
computers is available. This helps especially if storage inten-
sive work processes need to be executed, what will be more
effective using the 64 Bit technology.
New System requirements
Starting with VISU 18 Windows® XP and Windows® Vista are
no longer supported. Windows® 7 (SP1) is the minimum re-
quirement to use the VISU functions in an effective manner.
New designs for icons and toolbars
Optimized User-friendliness
Icons and toolbars have been overhauled to support the
intuitive usage of the PROGNOST® software. To ensure a clear
and meaningful machine icon, the standards ISO 10628 and
ISO 14617 are used as reference.
Regarding the trayicon in the status bar a new funcion is
integrated which allows to switch between one icon for all
machines to one icon for every connected machine.
www.prognost.com
PROGNOST Systems GmbH
Daimlerstraße 10
48432 Rheine
Germany
+49 (0)59 71 - 8 08 19.0
+49 (0)59 71 - 8 08 19.42
PROGNOST Systems, Inc.
1018 Hercules Ave.
Houston, TX, 77058
USA
+1 - 281 - 480 - 9300
+1 - 281 - 480 - 9302