Upload
hanhu
View
229
Download
0
Embed Size (px)
Citation preview
Set the stage for higher yields—with the strength and durability of New Holland Earth Metal® disk blades and sweeps. With tough, flexible alloy-steel construction—based on years of in-depth research on tillage and planting agronomics—these disk blades handle even the toughest residue. Thorough testing ensures superior durability and long life—saving you unnecessary downtime. And, with one of the largest selections in the industry, there’s an Earth Metal blade or sweep for every equipment brand and application.
VISIT YOUR NEW HOLLAND DEALER OR GO ONLINE TO THE PARTSTORE TO VIEW THE ENTIRE EARTH METAL LINE.
EARTH METAL® LONG-LASTING STRENGTH
FORM THE FOUNDATION FOR SUCCESS WITH SMART SOLUTIONS FROM NEW HOLLAND.From unpredictable weather patterns to new techniques, successful tillage is a moving target. At New Holland, we strive to help you stay on top of these challenges—with the right technologies, parts and service for your farming needs.
The genuine New Holland parts and expert tips throughout this book aim to help you achieve higher yields and greater success by getting the right start with your tillage efforts. In fact, the only parts and kits you’ll see in this book are those that meet our rigorous engineering and testing standards.
Quality parts aside, your dealer is always ready to assist you with Certified Maintenance Inspections, Planned Maintenance Agreements, extended warranties, and sound advice when it comes to the health and performance of your equipment. Consider this book a supplement to their expertise.
.
TABLE OF CONTENTS
Brian SpencerParts Marketing ManagerTillage, Planting and Seeding ProductsCNH Industrial Parts & Service
CULTIVATORS 6
DISK HARROW 10
VERTICAL TILLAGE 26
DEEP TILLAGE 27
CHISEL PLOW SWEEPS 28
COULTERS 30
MOLDBOARD PLOWS 32
PLANTERS 34
AIR HOE DRILLS 36
DISK DRILLS 39
SEED LUBE/PAINT 40
HITCH PARTS 42
PLOW BOLTS 44
PRECISION FARMING 46
REMAN 49
SHOP PRODUCTS 50
INDEX 52
EARTH METAL® LONG-LASTING STRENGTH
SAVE TIME, INCREASE PRODUCTIVITY
Thanks to the superior strength and flexibility of Earth Metal, producers can avoid unnecessary downtime—sometimes as much as the half-day it takes to change out wear parts. In addition to resisting stress fractures that might otherwise shatter conventional blades and sweeps, Earth Metal disk blades are measurably stronger and last significantly longer.
SMART TIP
Not all sweeps and disk blades are created equal. The stronger, sharper and longer-wearing they are, the fewer headaches in the field—and the fewer unnecessary drains on your profit. Less breakage and more efficient seedbed preparation and planting mean higher yields.
But what goes into a better sweep, opener or disk blade? The superior design of New Holland Earth Metal® ground-engaging components is based on years of in-depth research on tillage and planting agronomics—the science behind maximum yields.
The resulting product is tougher, longer-lasting and significantly more durable in the face of harsh field and crop conditions.
EARTH METAL®
PROVEN. PREFERRED. POWERFUL.
EARTH METAL®4
WHAT GOES INTO BETTER DISK BLADES? A LOT.Here’s an inside look at the Earth Metal manufacturing and testing process.
The Earth Metal factory is one of the most advanced in the world; material-handling robots assure quality control and consistency to give you the best product for your farm.
A 25-ton decoiler feeds steel through a leveler to a 2,000-ton press, which stamps out disk blanks. These blanks then undergo further processing, including edging, notching, shaping and heat-treating. The cutting edges of the disk blades are precision-machined using automated edge-turning equipment to create the optimal combination of edge sharpness and strength.
After emerging from the heat-treatment process, disk blades are water quenched while firmly locked in their dies. This allows for a shape that eliminates up to 90 percent of “disk wobble” and contributes to the overall toughness and durability of the blades.
In the finishing process, disk blades undergo shot blasting to remove scale. They are then coated with high-gloss enamel, which is baked to a smooth, hard finish that improves surface appearance and provides rust protection. An inline oven draws each blade individually, which relieves internal stresses and improves ductility and quality.
The process doesn’t end after production. Brinell or Rockwell tests measure hardness to ensure the disk blade is resistant to wear. The Ball test measures toughness by forcing a polished steel ball through the disk blade; the length and shape of the resulting fractures are measures of the disk blade’s ability to resist cracking.
Disk blades are also tested for elasticity under load. This test applies pressure to the blade—the propensity of the blade to return to its original shape afterward is a measure of its ability to resist impact.
EARTH METAL®
EARTH METAL®
1
2
3
4
5
6
WE’VE GOT A DISK BLADE FOR THAT.The Earth Metal line is one of the largest in the industry—with disk blade options for nearly every equipment brand and application. The Super Sharp™ edges on our latest disk blades, for example, are ideal for tough field conditions and genetically modified crops. See page 10 to learn more about choosing the right disk blade, and ask your dealer for a full selection.
5
CULTIVATORS – SWEEPS
CULTIVATORS – SWEEPS6
EARTH METAL® SWEEPS—MADE TO LASTAvailable for nearly every cultivator and field condition, our patented, heavy-duty Earth Metal sweeps are made to last—with an agronomic design for superior strength and optimum wear patterns. The high-strength alloy steel and superior heat treatment of Earth Metal sweeps promote better scouring and longer wear life. Refer to our Field Cultivator Application Chart to find the sweep that’s right for your application.
MAXXI-POINT™
• Constant-width wing design for maximum performance
• Heavy-duty extended nose with ½-inch wear point for increased wear life and penetration
PART NO. SIZE
372560A1 7 3⁄10"
372561A1 9 3⁄10"
372562A1 11 3⁄10"
PART NO. SIZE
380434A1 8" full
380435A1 9" full
380436A1 10 ½" full
400309A1 Adapter
MAXXI-GRIP™
• 20 percent heavier than Maxxi-Width sweep for increased wear life
• Mounts to heavy-duty cast adapter—easy to install, easy to replace
• Neoprene gripper strips on the side of the casting hold sweep firmly in place
MAXXI-WIDTH™
• Constant-width wing design for maximum performance• Heavy-duty, 1-inch reinforced wear tip for improved
penetration and less draft• Fits New Holland and most other makes of field cultivators
PART NO. SIZE
1547100C2 12 ½" full
1547101C2 7 ½" LWC
1547102C2 7 ½" RWC
1547103C2 9" LWC
1547104C2 9" RWC
PART NO. SIZE
1547095C2 4 ½" full
1547096C2 6" full
1547097C2 7 ½" full
1547098C2 9" full
1547099C2 10 ½" full
CULTIVATORS – SWEEPS
Earth Metal heavy-duty
Maxxi-Width™ and
Maxxi-Point™ sweeps
have 1¾-inch hole
centers. Each series
has a 7⁄16-inch bolt
hole to accommodate
cultivators with 7⁄16-inch holes.
To accommodate
field cultivators with 3⁄8-inch bolt holes,
use adapter bolt,
part number 810220C1
(7⁄16-inch head and 3⁄8-inch shaft).
MAKE/MODEL
HOLE SIZE
HOLE CENTERS
STEM ANGLE
Anderson 3⁄8" 1 ¾" 47°
Baker 7⁄16" 1 ¾" 47°
Bourgault 7⁄16" 1 ¾" 47°
Brady (prior to '70 – '71) 3⁄8" 1 ¾" 40°
Brady (after '70 – '71) 3⁄8" 1 ¾" 40°
Bush Hog 3⁄8" 1 ¾" 47°
Caulkins 3⁄8" 1 ¾" 47°
CASE, FC, FCM, FCSW 3⁄8" 1 ¾" 47°
Case IH and IH 7⁄16" 1 ¾" 47°
C.C.I.L. 3⁄8" 1 ¾" 47°
Cockshutt 285, 485 3⁄8" 1 ¾" 47°
Crustbuster 7⁄16" 1 ¾" 47°
Deere 1000 Series 3⁄8" 1 5⁄8" 43°
Deere 960 7⁄16" 1 ¾" 47°
Deere CCA, CC10, CC20 3⁄8" 1 ¾" 47°
Degelman 3000 Series 7⁄16" 1 ¾" 47°
DMI 7⁄16" 1 ¾" 47°
Ezee-On ½" 1 ¾" 47°
Flexi-Coil 200, 400 7⁄16" 1 ¾" 47°
MAKE/MODEL
HOLE SIZE
HOLE CENTERS
STEM ANGLE
Ford 208 3⁄8" 1 ¾" 47°
Frontier 7⁄16" 1 ¾" 47°
Glencoe, FC, MFC, FCSW 3⁄8" 1 ¾" 47°
Hesston 7⁄16" 1 ¾" 47°
Hiniker 7⁄16" 1 ¾" 47°
Kent 7⁄16" 1 ¾" 47°
Kewanee 3⁄8" 1 ¾" 47°
Krause 3⁄8" 1 ¾" 47°
Landoll 7⁄16" 1 ¾" 47°
Massey Ferguson 160 3⁄8" 1 ¾" 47°
Moline FT200 3⁄8" 1 ¾" 47°
Morris L240, L320 3⁄8" 1 ¾" 47°
Oliver 285,385,485 3⁄8" 1 ¾" 47°
Rhino/Athens 7⁄16" 1 ¾" 47°
Sunflower 7⁄16" 1 ¾" 47°
Taylor 3⁄8" 1 ¾" 47°
Wil-Rich 7⁄16" 1 ¾" 47°
Win Power 1500 7⁄16" 1 ¾" 47°
White Farm Equipment 3⁄8" 1 ¾" 47°
FIELD CULTIVATOR APPLICATION CHART
MAXXI-POINT PLUS™
• Same outstanding design and manufacturing features as the Maxxi-Point sweeps
• Mounts to heavy-duty cast adapter—easy to install, easy to replace
PART NO. SIZE
87460413 7 3⁄10"
87460414 9 3⁄10"
400309A1 Adapter
MAXXI-GRIP ADAPTERPART NO. 400309A1 (SINGLE) PART NO. 400309A1E (BULK PACK) PART NO. B96705NH (FOUR ADAPTERS WITH HARDWARE)
CULTIVATORS – SWEEPS 7
PART NO. B96705NH
PART NO. 400309A1
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
CULTIVATORS
CULTIVATORS8
NON-EARTH METAL® MISCELLANEOUS SWEEPS
PART NO. SIZE THICKNESS TYPE ANGLE HOLES HOLE SPACING
479005R2 6" 3⁄16" Full 57° 3 1"
479006R2 8" 3⁄16" Full 57° 3 1"
479009R2 8" 3⁄16" LH 57° 3 1"
479010R2 8" 3⁄16" RH 57° 3 1"
479007R2 10" 3⁄16" Full 57° 3 1"
479011R2 10" 3⁄16" LH 57° 3 1"
479012R2 10" 3⁄16" RH 57° 3 1"
479008R2 12" 3⁄16" Full 57° 3 1"
ALL-PURPOSE SWEEPS
UNIVERSAL ECONOMY SWEEPSPART NO. SIZE THICKNESS ANGLE HOLES HOLE SPACING BOLT SIZE
6083BA 4" ¼" 55° 3 2 ¼" 7⁄16"
6078BB 6" ¼" 55° 3 2 ¼" 7⁄16"
6079BC 8" ¼" 55° 3 2 ¼" 7⁄16"
6080BC 10" ¼" 55° 3 2 ¼" 7⁄16"
6081BC 12" ¼" 55° 3 2 ¼" 7⁄16"
PART NO. SIZE THICKNESS ANGLE HOLES HOLE SPACING BOLT SIZE
87589793 9" ¼" 47° 2 1 ¾" 7⁄16"
4497 11" ¼" 47° 2 1 ¾" 7⁄16"
5786 11" ¼" 47° 2 1 ¾" 7⁄16"
4498 12" ¼" 47° 2 1 ¾" 7⁄16"
FIELD CULTIVATOR SWEEPS
CULTIVATORS 9
CULTIVATORS
DANISH TINE SWEEPS• ¼-inch thickness
PART NO. SIZE
1547180C1 2 ½" full
1547181C1 4 ½" full
1547182C1 7" full
1547183C1 9" full
811191C1 1 3⁄8" reversible
PART NO. (WHITE) PART NO. (SILVER) DESCRIPTION
73342628 73342629 1 ½" x 9" shank protector - package of 100
73342634 73342635 1 ½" x 9" shank protector - package of 25
73342630 73342631 1 ¾" x 9" shank protector - package of 100
73342636 73342637 1 ¾" x 9" shank protector - package of 25
73342632 73342633 2" x 12" shank protector - package of 100
73342638 73342639 2" x 12" shank protector - package of 25
POLY SHANK PROTECTORS – WHITE AND SILVERPrevent residue build-up and protect against wear with New Holland poly shank protectors. The non-stick poly surface allows the shank and attached shovel to glide through soil and resists friction when cultivating and digging.
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
DISK BLADE SELECTION TOOL NOW AVAILABLE
WITH MY SHED™ MOBILE APPEnter diameter, thickness and bolt size to find the best blade for your application. Visit Partstore.Agriculture.NewHolland.com to download the My Shed mobile app.
DISK HARROW – DISK BLADES
DISK HARROW – DISK BLADES10
STEPS TO SELECTING THE RIGHT BLADE
STEP 1You must first identify the size of the disk blade you need. For illustrative purposes, we will assume that you’re looking for a 20-inch x 4.5-millimeter-thick disk blade.
STEP 3Finally, you need to decide if you are looking for a solid blade or a notched blade. In this case, we’ll assume it’s a solid blade.
STEP 2The size and shape of the center hole depends on the arbor bolt size. As an example, let’s say you’re looking for the disk blade size listed above with a 1 ½-inch round arbor bolt.
TOUGH CROP RESIDUE? GO SUPER SHARP
With edges up to five times sharper than conventional blades, our Super Sharp™ edge blades are designed to process and size residue of the toughest BT genetic crops. They also stand up under rocky conditions, without chipping or cracking, thanks to superior Earth Metal alloy steel. Be sure to use Kevlar gloves to install your Super Sharp edge blades, part number 87299086.
SMART TIP
STEP 4The following pages contain charts to help you identify the proper blades based upon the dimensional preferences identified in steps one through three. If you are fitting disk blades to a New Holland machine, you will need to refer to the chart titled “Crimp Centered Disk Blades” on page 14. If you are looking for full concave disk blades to fit any other make and model, you need to refer to the “Full Concavity Disk Blades” chart on page 13.
EXAMPLEBased on the above example, you would choose part number 87618056. Need some extra tilling power? Go with our Super Sharp™ edge notched blades, part number 87618057.
BLADE SIZE ARBOR BOLT SIZE CNH PART NO.
DIA (IN)
THICKNESS (MM)
7⁄8"SQ.
1" SQ.
1" RD.
1-1⁄8" SQ.
1-1⁄8" RD.
1-¼" SQ.
1-½" SQ.
1-½" RD.
1-5⁄8" RD.
1-¾" SQ.
1-¾" RD.
2" RD.
2-¼" SQ.
HOLE STYLE
SUPER SHARP SOLID
SUPER SHARP NOTCHED
20 4.5 • • SR4 87618056 87618057
DISK BLADE SELECTION TOOL NOW AVAILABLE
WITH MY SHED™ MOBILE APP
DISK HARROW – DISK BLADES
DISK HARROW – DISK BLADES 11
DISK BLADE CENTER HOLE REFERENCE GUIDE
HOLE SIZE
FITS ARBOR BOLT
CL1 7⁄8" square
CL2 1" square
CL3 1 1⁄8" square
CL4 1 ¼" square
CL5 1 ½" square
CL6 1 ¾" square
R1 1" round
R2 1 1⁄8" round
R3 1 ¼" round
R4 1 ½" round
R5 1 ¾" round
R6 2" round
R6.5 2 ¼" round
R7 2 ½" round
CLOVERLEAF OR SQUARE (CL)
ROUND (R)
HOLE SIZE
FITS ARBOR BOLT
SR1 7⁄8" square
SR2 1" square
SR3 1 1⁄8" square
SR4 1 ¼" square
SR4.5 1 ½" square
SR5 1 ½" square
SR6 1 ¾" square
SR7 2 ¼" square
DS1 7⁄8" square
DS2 1" square
DS3 1 1⁄8" square
DS4 1 ½" square
SQUARE ROUND (SR)
DUAL SQUARE (DS)
THICKNESS CONVERSION CHARTS FOR DISK BLADES:GAUGE/INCH TO METRIC
MM INCH
2 0.079
2.5 0.098
3 0.118
3.5 0.138
4 0.157
4.5 0.177
5 0.197
6.5 0.256
8 0.315
10 0.394
12 0.472
16 0.630
GAUGE INCH
14 0.083
13 0.095
12 0.109
11 0.120
1⁄8 0.125
10 0.134
9 0.148
8 0.165
7 0.180
6 0.203
¼ 0.250
5⁄16 0.312
1⁄8 0.375
½ 0.500
5⁄8 0.625
SQUARE (SQ)
HOLE SIZE
FITS ARBOR BOLT
SQ1 1" square
SQ1.5 1 ¼" square
SQ2 2 3⁄8" square
DISK HARROW – DISK BLADES
DISK HARROW – DISK BLADES12
DISK MANUFACTURER MODEL/APPLICATION BOLT SIZE
Allis Chalmers 2100 and 2300 series 1 ½" square
Amco WOD, WTD 1 1⁄8" square
WOE 1 3⁄8" round
WOF, WOJ, WTF, WTJ, F-15 1 ½" squareAthens 48 1" square
62 1 1⁄8" square
126, 131 1 ½" squareBlanton 4500 1 ½" square
B900, B1000 1 1⁄8" square
3000H 1 ½" square
Brent Brent CPC 1 ¾" round
Brillion Land Commander 1 ½" square
Burch Kwik Set, 209 1 1⁄8" square
208BW 1 ½" round
Tru-Cut 7⁄8" squareBush Hog 145, 146 reg 1 ¼" square
146 HD 1 ½" square
346 2 ¼" round
245 1 ¼" or 1 ½" square
1440, 1424, 1432, 1436, 1438, 1444 rolling bedder
1 1⁄8" square
1422 1" or 1 1⁄8" square
1437 1 1⁄8" or 1 ½" square
1445, 1450 1 1⁄8" or 1 ¼" squareDunham-Lehr GC 1 1⁄8" square
34 1 ½" roundFord 201, 202, 204 1" round
219, 236 1 ½" square
220, 222, 223, 240, 241 1 1⁄8" square
221 15⁄16" round
243 1 ½" roundHesston 2410 1 ¾" round
2420, 2440 1 1⁄8" squareGlencoe Soil finisher 1 ½" round
Yield Builder ripper 1 ½" roundIH/Case IH 122, 132, 350, 370, 470, 475,
480, 485, 4901 1⁄8" square
500, 501, 596, 610, 770 1 ½" square
630 1 ½" round
780 1 ¾" squareJohn Deere 100, 110, 200, 210, 220, 230,
310, 6371 1⁄8" square
115 1 1⁄8" round
105 1" round
1635, 1640, 2620, 2621 1 ½" square
215, 225, 425, 215, 235, 4000, 1630
1 ½" round
BWA, BWF, 525 1 ¼" square
DISK MANUFACTURER MODEL/APPLICATION BOLT SIZE
John Deere(continued)
2650, 2651 1 ¾" square
2700 2 ¼" square
510, 512 ripper 1 1⁄8" square
Kent Discovator, 6112D, 6118D, 6323D, 6327D
1 ½" round
7333D, 6540D, 7550D 1 ½" round
Kewanee 800 and 1000 series 1 1⁄8" square
Krause 1465, 1470, 1740, 1769, 3200 series
1 ¾" round
1952, 1956, 1960, 1970, 1968, 1969, 1979, 1965, 1966, 1976
1 ½" round
1901, 1904, 1907, 1922, 1925, 1928, 1921, 1924, 1927, 1959, 1963, 1973
1 ½" round
4995, 5800, 7300, 7400, 8200, 8300, 1498, 1499, 1580, 1912, 1915, 1918
1 ½" round
14801 ½" round or 1 ¾" round
1900, 1950, 2100, 2200, 2400, 3100 series
1 ½" round
2700 series 2 ½" roundLandoll Till-All 1 ¼" square
Weatherproofer ripper 1 ½" round
M&W Earthmaster (on a gang) 1 ½" square
MasseyFerguson
30, 40, 270 1 ½" square
21 1" square
25, 39 1" round
120, 220, 233, 213 1 1⁄8" square
52, 72 1 1⁄8" round
520, 620, 820 1 ¼" square
Miller Series 1 and series 2 1 ¾" round
New Holland OD100, OD200, TD100, TD200 1 ¾" round
OD300 2" roundRhino 127, 131, 137, 167, 177, 187 1 ½" square
Flex 90 1 1⁄8" square
Flex 90B 1 ¼" squareSchafer 355 1 ¾" round
555 2" roundSunflower 1210, 1230 1 ½" round
1211, 1231, 1233, 1300, 1320, 1330, 1321, 1331, 1430, 1440
1 ¾" round
1431, 1434, 1435, 1441, 1444, 1541, 1544, 4211, 6010, 6030, H3, H4
1 ¾" round
White 250, 251, 252, 253, 254, 255, 256, 263, 264, 265, 271, 272
1 1⁄8" square
273, 274 1 ½" round
281 1 ½" square
DISK BLADE CENTER HOLE REFERENCE GUIDE DISKS & RIPPERS
DISK HARROW – DISK BLADES
DISK HARROW – DISK BLADES 13
*NOT EARTH METAL
FULL CONCAVITY DISK BLADES FOR ALL MAKES
BLADE SIZE ARBOR BOLT SIZE CNH PART NO.
DIA. (IN)
THICKNESS (MM)
7⁄8"SQ.
1" SQ.
1 1⁄8" SQ
1 ¼" SQ
1 ½" SQ
1 ¾" SQ
2 3⁄8" SQ
1" RD
1 1⁄8" RD
1 ¼" RD
1 ½" RD
1 5⁄8" RD
1 ¾" RD
2" RD
HOLE STYLE
STANDARD EDGE SOLID
STANDARD EDGE NOTCHED
SUPER SHARP SOLID
SUPER SHARP NOTCHED
16 3 • • • DS2 963879R2
16 3 • CL3 121913A1
16 3 • CL2 MAG411D7988*
18 3 • CL2 MAG411D5921*
18 3.5 • CL3 121914A1
18 3.5 • • • DS2 963880R2
18 4 • • • DS3 87618050 87618051
18 4.5 • • SR4 87618052
20 4.5 • • SR1 87618053
20 4.5 • • • DS3 87618054 87618055
20 4.5 • • SR4 87618056 87618057
20 4.5 • CL3 87618058
22 4.5 • SQ2 87618059 87618060
22 5 • • SR4 87618068 87618069
22 5 • • SR5 87618064 87618065
22 5 • • SR4.5 87618070 87618071
22 5 • • • DS3 87618066 87618067
22 5 • CL3 73342886
22 6.5 • • SR4 87618074
22 6.5 • • SR5 87618075
24 5 • • SR4 956702R4
24 5 • • SR5 604858R3
24 5 • • • DS3 644011R5
24 5 • • SR6 998827R1
24 6.5 • • SR5 998865R2 998866R3
24 6.5 • • SR4 790-1000
24 6.5 • SQ2 963862R2 963863R2
24 6.5 • SQ1 407293R2 407428R2
24 8 • • SR5 2804227R2
26.5 6 • CL4 87585198 87585199
26.5 6 • • SR5 87585200 87585201
26.5 6.5 • R6 31332R2
26.5 6.5 • CL4 407298R3
26.5 6.5 • • SR5 407434R4 407431R4
26.5 6.5 • CL4 407429R3
26.5 8 • • SR6 31357R2 31356R2
26.5 8 • • SR5 2804228R3 87429148
28.5 6 • SQ1.5 87585810 87585811
28.5 6.5 • SQ1.5 407300R3 958243R4
28.5 8 • SQ1.5 339388A2 339389A2
32.5 10 • SQ1.5 998861R2
DISK HARROW – DISK BLADES
DISK HARROW – DISK BLADES14
BLADE SIZE ARBOR BOLT SIZE CNH PART NO.
DIA. (IN)
THICKNESS (MM)
7⁄8"SQ.
1" SQ.
1 1⁄8" SQ.
1 ¼ SQ.
1 ½" SQ.
1 ¾" SQ.
1" RD.
1 1⁄8" RD.
1 ¼" RD.
1 ½" RD.
HOLE STYLE
STANDARD EDGE SOLID
STANDARD EDGE NOTCHED
SUPER SHARP SOLID
SUPER SHARP NOTCHED
16 3 • • SR1 84192889
16 3 • • SR3 31022R1
16 3.5 • • SR3 651197R1
16 4.5 • • SR4 87442973
18 3.5 • • SR1 31018R1
18 4 • • • DS2 87618082
18 4 • • SR3 87618083
18 4.5 • • SR4 87442974 87442979
18 5 • • SR4 87442980
20 4 • • SR4 87442981
20 4.5 • • SR3 87618084 87618085
20 4.5 • • SR4 87442981 87442982
20 5 • • SR3 87618086
20 5 • • SR4 87442986
20 5 • • SR4 87442983 87442984
20 6.5 • • SR4 87442985
20 5 • CL5 87442998
22 4.5 • • SR4 87618094
22 4.5 • • SR4 87442991 87442992
22 4.5 • • SR3 87618087 87618088
22 5 • CL5 87442999
22 5 • • SR3 87618095 87618090
22 5 • • SR4 87442996
22 5 • • SR4 87442993 87442994
22 5 • • SR3 87618089
22 6.5 • CL5 87443000 87612754
22 6.5 • • SR4 87442995
22 6.5 • • SR3 87618093
24 5 • CL3 543437R1 543438R1
24 6.5 • • SR4 181605A1 87442997
24.3 5 • CL5 87443003
24.3 6.5 • CL5 549986R2 87443004
26.5 6 • CL5 87585196 87585197
26.5 6.5 • CL5 58934C3 58917C3
26.5 8 • CL5 28336R3 28345R3
28.5 6 • CL5 87585202 87585203
28.5 6.5 • CL5 27601R3 27600R3
28.5 8 • CL5 31224R3 31225R3
28.8 8 • CL6 60276C3
30 8 • CL6 60278C2
32.5 8 • CL6 130868A2 60279C3
CRIMP CENTER DISK BLADES
EDGE CARE™ PLUS: RESTORES EARTH METAL® TO FACTORY-APPROVED SHARPNESS
50 PERCENT IMPROVED SHARPENING TIME (2 TO 3 MINUTES PER DISK BLADE)
DISK HARROW – DISK BLADES
DISK HARROW – DISK BLADES 15
PART NO.DIA. (IN)
THICKNESS (MM)
CENTER HOLE DIA. (IN)
NO. OF HOLES
BOLT CIRCLE (INCHES/MM) EDGE
443623A1 14 2.5 2 ½ 4 101.6 Standard
84180366 18.1 3 2 ½ 4 127 Standard
443629A1 18.1 6.5 4 5 139.7 Standard
443630A1 18.1 3 1 ¾ 4 127 Notched
84380555 18.1 3 2 ½ 4 127 Standard
84380560 18.1 3 2 ½ 4 127 Notched
87443007 20.3 5 4 5 139.7 Super sharp
87443008 20.3 6.5 4 5 139.7 Super sharp
87443009 20.3 6.5 4 5 139.7 Super sharp notched
87443010 22.3 6.5 4 5 139.7 Super sharp
FLAT CENTER DISK BLADES
PART NO. DIA. (IN) THICKNESS (MM) HOLE STYLE ARBOR BOLT SIZE
87401019 20 5 CL5 1 ½" Sq
87415788 20 5 SR4 1 ¼" Sq.
1 ½" Rd.
THREE-SIDED BLADES
• Sharpen blades on the gang or sharpen individual, hub-mounted blades• Simple design allows quick and easy setup• Cold-sharpening technology extends disk blade life without sacrificing
blade diameter, ductility or hardness• Extra sharpening wheel included
EDGE CARE PLUS PART NO. 73341805
PART NO. 87401019
DISK HARROW – DISK BEARINGS16
DISK HARROW – DISK BEARINGS
NEW BLADES? TIME FOR NEW BEARINGS.When you invest in new blades—particularly our stronger, sharper and longer-wearing Earth Metal® blades—you’ll want new bearings as well. The following pages showcase your New Holland dealer’s extensive line of disk harrow bearings, sorted by manufacturer.
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Allis Chalmers
DC211TT3 1 ½ sq. W211PP3 K7 disk
AMCO
10272 DS208TT5 1 1⁄8 sq. W208PPB5 WTD5, WTD6, LFD2, LFDB2 disks DS80MS
10333 DS208TT8 1 1⁄8 sq. W208PPB8 WTD10, WTD3, WTD4 disks
11052 DC210TT2 1 15⁄16 rd. W210PP2 Disk harrows with 1 15⁄16"-axle
11071 DC211TT3 1 ½ sq. W211PP3 516, 517, 518, F15 disk harrows
11078 DS210TT4 1 1⁄8 sq. W210PP4 Disk harrows with 1 1⁄8"-axle DS90MS
11079 DS208TT6 1 sq. W208PPB6 LFBD2, LFB2, LTB2
11503 DC211TTR4 1 ½ sq. GW211PP4
11504 DC214TTR3 2.688 rd. GW214PP3 Disk harrows with 2.688"-axle
G10218 DC214TTR2 2 ¾ rd. GW214PP2 WTF2, WOJ10, WOF10 disks
G10333 DS208TTR8 1 1⁄8 sq. GW208PPB8 13 ½ pulverizing disk DSG80MSA
G10446 DC210TTR4 1 1⁄8 sq. GW210PP4 Disk harrows with 1 1⁄8"-axle
G10771 DS210TTR2 1 15⁄16 rd. GW210PPB2 Disk harrows with 1 15⁄16"-axle DSG90MSA
G10906 DS211TTR3 1 ½ sq. GW211PPB3 Disk harrows with 1 ½"-axle DSG100MSA
G10272 1 1⁄8 sq. GW208PPB5 Disk harrows with 1 1⁄8"-axle
G11071 DC211TTR3 1 ½ sq. GW211PP3 WOF3, WOF5, WOF6, WOJ3, WOJ4, offset disks
G11078 DC210TTR4 1 1⁄8 sq. GW210PP4 RB1, 2, 3, 4, 5, 6, WOD2, 341, 342, 343, 344, disk harrows
Athens
DC208TT5 1 1⁄8 sq. W208PP5 Ridger
DS208TT5 1 1⁄8 sq. W208PPB5 Ridger DS80MS
1 1⁄8 sq. GW208PPB5
DS208TT6 1 sq. W208PPB6
DC211TT3 1 ½ sq. W211PP3 Levee plow, 1st series
DC211TTR2 2 3⁄16 rd. GW211PP2 All Case IH disk harrows
DC211TTR3 1 ½ sq. GW211PP3 All Case IH disk harrows
DS211TT6 1 ½ sq. W211PPB6 Levee plow, 2nd series DS100MS
DS211TTR3 1 ½ sq. GW211PPB3 Disk harrows, new ground disks DSG100MSA
Bingham
GA15 DC208TT5 1 1⁄8 sq. W208PP5 Bedder
DISK HARROW – DISK BEARINGS 17
DISK HARROW – DISK BEARINGS
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Blanton
1023 DS208TT12 1 1⁄8 sq. W208PPB12 Square axle disks
7129 DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows
BC1 DC208TT8 1 1⁄8 sq. W208PP8
L512B 7⁄8 sq. W208PPB11 Square axle disks
Brent
DS211TTR13 1 ¾ rd. GW211PPB3 Front gang. Early Riser CPC and Earthquake with 4-bolt flange DSG100MSA
DS209TT2 1.7717 rd. W209PPB2 Rear gang. Early Riser CPC and Earthquake with 4-bolt flange DS85MS
FD211RE 1 ¾ rd. DHU1-3/4S211 Rear gang. Late CPC and Earthquake with 4-bolt flange
Brillion
2J516 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
3J131 DS211TT3 1 ½ sq. W211PPB3 DS100MS
9C16 DC208TT8 1 1⁄8 sq. W208PP8
FD211RM 1 ½ sq. DHU1-3/4S211 Land Commander I and II disk gangs
Burch
DS210TT2 1 15⁄16 rd. W210PPB2 EZ, EZ-A, EZ-B, 145 disks. Kwik set, hippers, ridgers DS90MS
201A56 DS208TT13 7⁄8 sq. W208PPB13 Harrow DS80MS
203214 DS211TT3 1 ½ sq. W211PPB3 Offset disk DS100MS
204-82 DS211TT6 1 ½ sq. W211PPB6 Super Tandem built in 1973 and after DS100MS
208-12 DS209TTR2 1 ¾ sq. GW109PPB2 DSG85MSA
78672A DS211TTR3 1 ½ sq. GW211PPB3 Offset disks, Super Tandem DSG100MSA
9554A DC208TT5 1 1⁄8 sq. W208PP5 Ridger, 8 row
J9373 DS208TT5 1 1⁄8 sq. W208PPB5 Ridger, E-Z set E-2GO, Early Riser DS80MS
Bush Hog
1100082475 DS208TT2A 1 ½ rd. W208PPB2 Disk harrows with 1 ½" axle DS80MS
11142416 DS208TT12A 1 1⁄8 sq. W208PPB19 Disk harrows with 1 1⁄8" axle
14-6-244 DC211TTR2 2 3⁄16 rd. GW211PP2 Disk harrow with 2 3⁄16" axle
14-36-183 DC208TTR17 1 1⁄8 sq. GW208PP17 1424, 1426, 1432, 1436, 1438, 1439, 1444, with 1 1⁄8" gang bolt
14-22-63 DS208TT6 1 sq. W208PPB6 Disk harrows with 1"-axle DS80MS
14-24-26 DS208TT12 1 1⁄8 sq. W208PPB12 All Case IH disk harrows
14-24-63 DC208TTR17 1 1⁄8 sq. GW208PP17 1422, 1423 disks with 1"-gang bolt
14-4-5 DS209TT2 1.7717 rd. W209PPB2 1432, 1436 disks DS85MS
14-5-109 DS210TT2 1 15⁄16 rd. W210PPB2 145 DS90MS
14-6-430 DC211TTR3 1 ½ sq. GW211PP3 145, 146, 246, 1435, 1437 with 1 ½"-gang bolt
16-11-176/7950006 DC208TT5 1 1⁄8 sq. W208PP5 Bedder and ridger
Caldwell
DS208TT5 1 1⁄8 sq. W208PPB5 1 1⁄8 axle models DS80MS
DISK HARROW – DISK BEARINGS
DISK HARROW – DISK BEARINGS18
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Calkins
5449031 DS209TTR5 1 ¼ sq. GW209PPB5 DSG85MSA
CASE
270061503 DC214TTR3 2.688 rd. GW214PP3
H747139 DC208TT5 1 1⁄8 sq. W208PP5 Trencher boom end sprockets
H747303 DC208TT10 1 ½ rd. W208PP10 TF300 trencher boom end sprockets
H747394 DC211TT2 2.188 rd. W211PP2 Trencher boom end sprockets
H747410 DS209TT2 1.7717 rd. W209PPB2 CASE Davis 700 chain drive DS85MS
H747444 DC211TT3 1 ½ sq. W211PP3 CASE, CASE Davis trenchers
T14116 DC208TT2 1 sq. W208K2-E9003
T15820 DS208TT6 1 sq. W208PPB6 Small ridger DS80MS
T16288 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
T25486 DS208TT8 1 1⁄8 sq. W208PPB8 630210R91 DS80MS
T28503 DS208TT12 1 1⁄8 sq. W208PPB12 All Case IH disk harrows
T34178 DS209TT6 1.535 rd. W209PPB6 B, BW, WB series disks T29920*
T51610 DS211TTR3 1 ½ sq. GW211PPB3 K23, K23A, G59 disks (sperical O.D.) DSG100MSA
T51653 DC211TTR3 1 ½ sq. GW211PP3 E30, G109, G110, G119, K23, K23A, disk harrows
T53781 DS210TTR2 1 15⁄16 rd. GW210PPB2 F21, F21H disk harrows DSG90MSA
T54897 DS210TTR5R 1.785 rd. GW210PPB5 Dot B, 25, 28, and 31 disk harrows DSG90MSA
T56688 DC211TTR4 1 ½ sq. GW211PP4 K23B disk harrows
T57559 DS211TTR2 2 3⁄16 rd. GW211PPB2 DSG100MSA
Case IH and International Harvester
1251062C91 DS209TT2 1.7717 rd. W209PPB2 DS85MS
ST491A 1 ¾ rd.
ST627A DS211TT4 2.19 rd. 500 disks DS100MS
ST740B 2 3⁄16 rd. FD211RBA 500, 501, 596, 700, 770, MRX690, RMX370, RMX790
Chas Machine
DC208TT5 1 1⁄8 sq. W208PP5 Trencher
Chattanooga
DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
DS211TT6 1 ½ sq. W211PPB6 Levi, Levi-Dyke plow DS100MS
Deutz-Allis
DC211TT3 1 ½ sq. W211PP3 K7 disk
430478 DS209TT2 1.7717 rd. W209PPB Disk harrows DS85MS
430796 DS208TT7 1 3⁄16 rd. W208PP7 DS80MS
70583939 DS211TTR3 1 ½ sq. GW211PPB3 2600 disk DSG100MSA
DISK HARROW – DISK BEARINGS 19
DISK HARROW – DISK BEARINGS
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Domries
K85 DC210TT2 1 15⁄16 rd. W210PP2 1 1⁄8-axle series
DC211TT3 1 ½ sq. W211PP3 1 ½-axle series
DMI
21842400 DS209TTR4 1.535 rd. GW209PPB4
Dunham
DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows (wide O.R.)
GK260 DS208TT5 1 1⁄8 sq. W208PPB5 Disk harrows DS80MS
Eversman
261750 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
266740 DS208TT12 1 1⁄8 sq. W208PPB12
Ezee On
DS214TTR3 2.312 rd. GW214PPB3 Disk harrows
11504 DC214TTR3 2.688 rd. GW214PP3
10771 DS210TT2 1 15⁄16 rd. W210PPB2 DS90MS
1A64318 FD209RB 1 ½ rd. DHU1-1/2R209 Disk harrows
1R41009 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
310072 DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS
340103 DS209TT4 1.535 rd. W209PPB4 Disk harrows DS85MS
7377-1 DS211TT3 1 ½ sq. W211PPB3 216 and 100 beet harvest DS100MS
EP5403 DC211TTR4 1 ½ sq. GW211PP4
EP6576 DS209TTR4 1.535 rd. GW209PPB4
G10771 DS210TTR2 1 15⁄16 rd. GW210PPB2 Disk harrows
G11078 DC210TTR4 1 1⁄8 sq. GW210PP4
FMC
15148 DC208TT10 1 ½ rd. W208PP10
15617 DS208TT2A 1 ½ rd. W208PPB2 Disk harrows DS80MS
Ford
113903 DS209TT2 1.7717 rd. W209PPB2 204, 210, 224, 230 disks DS85MS
177849 DC210TT2 1 15⁄16 rd. W210PP2
7200460 DS209TTR2 1 ¾ rd. GW209PPB2 230, 201, 202, E, J, L disk harrows DSG85MSA
MULCB112SG DS211TT3 1 ½ sq. W211PPB3 236 cutting disks DS100MS
MULCBB112 DC211TT3 1 ½ sq. W211PP3 219, 223 cutting disks
NDAS4508BJ DS208TT5 1 1⁄8 sq. W208PPB5
SBP238481B DS208TTR8 1 1⁄8 sq. GW208PPB8 241, 242M 243M 246 disk harrows DSG80MSA
SFL2042 DS211TTR13 1 ¾ rd. GW211PPB13 251 disk harrows DSG100MSA
DISK HARROW – DISK BEARINGS
DISK HARROW – DISK BEARINGS20
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Forest City
DC208TT5 1 1⁄8 sq. W208PP5 Ridgers
GANDM
DS210TT2 1 15⁄16 rd. W210PPB2 3-pt. vineyard disks DS90MS
Glencoe
YB8400 DS209TTR4 1.535 rd. GW209PPB4 Yield builder disk gangs and baskets
YB8500 FD209RB 1 ½ rd. DHU1-1/2R209 Yield builder disk gangs with riveted flange
Great Plains
822-208C FD209RB 1 ½ rd. DHU1-1/2R209 Ultra-till disk gangs, turbo-chopper baskets
822-209C FD209RK 1 ¼ sq. DHU1-1/4S209 Turbo-till tolling spike harrows
FD211RE 1 ¾ rd. DHU1-3/4S211 4360A, 5300A, 6360A, 7225A, 7300A, 9225A
Greenline
DS211TTR3 1 ½ sq. GW211PP3 Disk harrows DSG100MSA
Hardee
DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows
Hesston
700700613 FD209RB 1 ½ rd. DHU1-1/2R209 2540 soil saver
700710152 DS208TT6 1 sq. W208PPB6 Disk harrows DS80MS
Hester
DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows
Hiniker
DS211TTR2 2.19 rd. Coulter chisels DSG100MSA
IMCO
DS208TT12 1 1⁄8 sq. W208PPB12 Wheel disks
John Deere
A20175 1 1⁄8 sq. GW208PPB5 100, 110 disks
A20649 DS209TTR10 1 ¾ rd. GW209PPB11 210, 220, 230 disks DSG85MSA
AA14878 DC208TT8 1 1⁄8 sq. W208PP8 101 chisel plows, WDC, 23, 2FK, F871, F901, F902, F984, bedders
AK32778 DC211TT2 2.188 rd. W211PP2
AK33797 DC210TT 1 15⁄16 rd. W210PP10 80, 100, 225, 325, 414, 414A, 416, 1200, 1400, 2200, 2400, 3000, 4000
AK3892B DC208TT2 1 sq. W208K2-E9003 K, KBA, KBL, KBY, FW, RW, GR, GRL, disk harrows
AN240220 DS209TTR4 1.535 rd. GW209PPB4 Disk harrows with 1.535"-axle
AN240221 DS211TTR13 1 ¾ rd. GW211PPB13 Disk harrows with 1 ¾"-axle DSG100MSA
AW20540 DS208TT2A 1 ½ rd. W208PPB2 Disk harrows with 1 ½"-axle DS80MS
B34215 DS211TTR9 2 3⁄16 rd. GW211PPB9300, 310, 315, 330, 331, 335, 340, 350, 355, 360 disks; 1700, 1710, 1710
DSG100MSA
GZ379381 FD211RJA 1 15⁄16 rd. DHU11516R211 400, 600, 610, 810 harrows
JD8656 DC211TTR2 2 3⁄16 rd. GW211PP2 Disk harrows with 2 3⁄16"-axle
DISK HARROW – DISK BEARINGS
DISK HARROW – DISK BEARINGS 21
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
JD8664 1 ¼ sq. W209PPB5 9000 drill, 4400 combine
JD8664 DS209TT8A 1 ¼ sq. W209PPB8 9000 drills, 4400 combines narrow O.R. brg. DSG85MSA
JD9248 DS208TT5 1 1⁄8 sq. W208PPB5 8500, F810H, F850H, 4, 5, and 6 tillers DS80MS
JD9338 HPC100GP 1 sq. 206KKR6 450, 515, 520, 8000 grain drills, 50 series corn head
JD9350 DC208TT5 1 1⁄8 sq. W208PP5 F871, F901, F984, F981, F982 bedders, 2700 BSN 1199
Johnson
275776 DS216TTR3 3 rd. GW216PPB3 Disk harrows
Kelly
05A51001 DS209TTR4 1.535 rd. GW209PPB4
06A51001 DS208TT5 1 1⁄8 sq. W208PP5 DS80MS
06A51-001 DC208TT5 1 1⁄8 sq. W208PP5 Coulters
Kent
FC0481 FD209RB 1 ½ rd. DHU1-1/2R209 Disk harrows
Kewanee
B2055 DC211TT3 1 ½ sq. W211PP3 Disk harrows with 1 ½" axle
B2151 DS208TTR8 1 1⁄8 sq. GW208PPB8 100, 200, 170, 236, 300, 500, 600, 700, 900 series DSG80MSA
B2246 DS210TTR4 1 1⁄8 sq. GW210PPB4 1000, 1025, 1100, 1200 built before 1978 DSG90MSA
B2725 FD209RM 1 1⁄8 sq. DHU1-1/8S209 1000 series built after 1978, 1025, 1030, 1100, 1175 series
B3587 FD211RM 1 ½ sq. DHU1-3/4S211 1200 series
B3625 DC208TT10 1 ½ rd. W208PP10 Disk harrows
B7778 DS209TTR2 1 ¾ rd. GW209PPB2 209, 218 disk DSG85MSA
B7980/G0052604 DS208TT5 1 1⁄8 sq. W208PPB5 206, 400 disk DS80MS
B8018 DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows with 1 1⁄8"-axle
G1046244 DC211TTR2 2 3⁄16 rd. GW211PP2 Disk harrows with 2 3⁄16"-axle
G1046430 DC211TTR3 1 ½ sq. GW211PP3 Disk harrows with 1 ½"-axle
G1436183 DC208TTR17 1 1⁄8 sq. GW208PP17 Disk harrows with 1 1⁄8"-axle
King Plows
BB-2 7⁄8 sq. W208PPB11 CFB disk harrows
BB-2N DS208TT12 1 1⁄8 sq. E208PPB12 KGB, WGH, EZB, MFB, disk harrows
Krause
1927-11-0 CDS209TTR 1.530 rd. 1900-1928, 2135-2166, 2200, 4900 series rock flex
2410-11-0 CDS211TTR 1 ¾ rd. 2400 series rock flex gang
40102/P-212-10-2 DS208TT7 1 3⁄16 rd. W208PPB7 405-408 DS80MS
40-103/P350-10-1 DS210TT5 1 ¾ rd. W210PPB5 Disk harrows DS90MS
40-104/P412-10-2 DS209TT4 1.535 rd. W209PPB4408A-412, 610-629, 636-641, 900-908, 952-969, 1144-1156, 1401-1428, 1576-1592A, 1900-1928, 1952-1979, 2135-2166
DS85MS
40-105/612-10-2 DS209TTR4 1.535 rd. GW209PPB4 900-908, 952-969, 1144-1156, 1401-1428
40-109/1934-12-0 FD209RB 1 ½ rd. DHU1-1/2R2091590, 1576-1592A, 1900-1928, 1952-1979, 2100-2166, 2190-2196, 2200-2244, 3948-3957, 3990-3994, 4900-4945, 4900A-4927A, 4950-4994
DISK HARROW – DISK BEARINGS
DISK HARROW – DISK BEARINGS22
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
40-114 FD211RE 1 ¾ rd. DHU1-3/4S211 1740-1767, 2400-2495, 4995, 5812-5824
40-119 DS209TTR6P 1.530 rd. Disk harrows
2410-11-0/40-173 DS211TTR23 1 ¾ rd. GW211PPB21 1740-1767, 2400-2495, 5812-5824 DSG100MSA
40-128 FD209RK 1 ¼ sq. DHU1-1/4S209 Disks with 1 ¼"-axle
612-10-2 DS209TTR4 1.535 rd. GW209PPB4 Disk harrows
Landoll
1065010003 DS209TTR4 1.535 rd. GW209PPB4
1065010011 FD209RB 1 ½ rd. DHU1-1/2R209 Weather proofer disk gang, harrows
140464 DC211TTR21 1 ¾ rd. GW211PP25 6230, 7410VT, 7430VT, 7431VT, 7450VT
DS211TTR23 1 ¾ rd. GW211PPB21 8300 weather proofer DSG100MSA
Lillisont
37-61-001 DS208TT12 1 1⁄8 sq. W208PPB12
40-61-001 DS209TT7 1 ¼ sq. W209PPB7
40-61-005 DS209TTR8 1 ¼ sq. GW208PPB8 DSG85MSA
Lockwood
202112 DC208TT10 1 ½ rd. W208PP10
Long
9-90092 DS208TT12 1 1⁄8 sq. W208PPB12 958, 959 disks
9-90093 7⁄8 sq. W208PPB11 953, 956 disks
9-90155 DS209TT7 1 ¼ sq. W209PPB7 Disk harrows
9-90241 DS211TT6 1 ½ sq. W211PPB6 958, 959, 960, 1090, disk harrows DS100MS
9-92088 DS211TTR3 1 ½ sq. GW211PPB3 DSG100MSA
MANDW
2436003 DC211TTR3E 1 ½ sq. Earthmaster
Massey Ferguson
1905678M1 DC211TT3 1 ½ sq. W2112PP3 Disk harrows with 1 ½"-axle
447899M1 DS208TT12 1 1⁄8 sq. W208PPB12 34MTD and 33 rev. disks
449432M1 DS211TTR3 1 ½ sq. GW211PPB3 30, 40, 520, 620, 720 disk harrows DSG100MSA
8311103M1 832634M2 DS208TT2A 1 ½ rd. W208PPB2 36, 52, 75 disk harrows DS80MS
831960M3 DS210TT2 1 15⁄16 rd. W210PPB2 Plows DS90MS
832540M1 DS211TT3 1 ½ sq. W211PPB3 38 41 42 disk harrows DS100MS
834367M1 1025130M1 DS208TT6 1 sq. W208PPB6 21 disk harrows
835050M1 DS209TT2 1.7717 rd. W209PPB2 28, 33, 34, 39, 68 disk harrows DS85MS
842303M1 1 ¼ sq. W209PPB5 520, 620, 820 disk harrows
842323M1 1066086M1 DS209TTR5 1 ¼ sq. GW209PPB5 520, 620, 820 disk harrows-relube bearings DSG85MSA
843638M1 1905666M1 DS208TT5 1 1⁄8 sq. W208PPB5 Disk harrows with 1 1⁄8" axle DS80MS
DISK HARROW – DISK BEARINGS
DISK HARROW – DISK BEARINGS 23
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
McClesky
DS208TT12 1 1⁄8 sq. W208PPB12 F228, L150 harrows
McFarlane
RT2274 DS211TTR3 1 ½ sq. RD4000 BSN 12946, RT2000, RT3000 DSG100MSA
RD4498 FD211RM 1 ½ sq. RD4000 ASN 12947
DRB3826 FD209RB 1 ½ rd. RD4000 rolling basket ASN 12756
Melroe
6510628 DC211TT3 1 ½ sq. W211PP3
6519831 DS208TT6 1 sq. W208PPB6 DS80MS
Midland
15620 DS209TTR8 1 ¼ sq. GW209PPB8 Disks DSG85MSA
Miller
4000044 DS211TTR13 1.785 rd. GW211PPB13 Series I, II and heavy-duty disks with 24"- and 26"-disks DSG100MSA
4000005 DS211TTR2 2.19 rd. GW211PPB2 Early models with cast spools DSG100MSA
Minn-Moline
DC208TT5 1 1⁄8 sq. W208PP5 Hipper, ridger
20H2152 DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS
20H5836 DS208TTR6 1 sq. GW208PPB6 KA disk harrows DS80MS
Multi-Purpose
DC208TT5 1 1⁄8 sq. W208PP5 Ridger
42424 7⁄8 sq. W208PPB11
New Holland
276882 DS209TTR2 1 ¾ rd. GW209PPB2 DSG85MSA
NDAS4508BJ DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
NDAS4508FF DS208TT13 7⁄8 sq. W208PPB13 DS80MS
SPB238481B DS208TTR8 1 1⁄8 sq. GW208PPB8 DSG80MSA
Oliver
237092B DS208TT7 1 3⁄16 rd. W208PPB7 241, 352, 250 series wheel disk harrows DS80MS
238481B DS208TTR5 1 1⁄8 sq. GW208PPB8 263 disks DSG80MSA
30-1005197 DS208TT5 1 3⁄16 rd. W208PPB7 DS80MS
Pico
4404-P DC211TT3 1 ½ sq. W211PPB3 HD Levee plows, WO series disk harrows DSG85MSA
744-P DC208TT5 1 1⁄8 sq. W208PPB5 LO, 175, 185, 200, 206, 250, 300, LT400, 720
Piper
DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows and ridger
1 ¼ sq. W209PPB5 Do-all
DISK HARROW – DISK BEARINGS24
DISK HARROW – DISK BEARINGS
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Rome
DS208TT12 1 1⁄8 sq. W208PPB12 7 ½ disk harrows
Shaffer
DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS
DS210TT2 1 15⁄16 rd. W210PPB2 Disk harrows DS90MS
Strathmore
3055 DC210TT2 1 15⁄16 rd. W210PP2
3056 DS210TT2 1 15⁄16 rd. W210PPB2 DS90MS
Southern
DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows, 13"-pulverizing disks
Sunflower
1186 DS208TT7 1 3⁄16 rd. W208PPB7 DS80MS
1829 DS209TTR4 1.535 rd. GW209PPB4
2042 DS211TTR13 1 ¾ rd. GW211PPB13 Disk harrows DSG100MSA
24A5301 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS
SN3091 DC211TTR21 1 ¾ rd. GW211PP25
Disks 1130, 1211, 1212, 1231, 1232, 1233, 1234, 1321, 1331, 1431, 1432, 1433, 1434, 1435, 1441, 1442, 1443, 1444, 1541, 1543, 1544, 1550, 6630, 6631, disk rippers 4306, 4310, 4311, 4410, 4411, 4511, soil conditioners 7212, 7232, 7252
FK311007 FD209RK 1 ¼ sq. DHU1-1/4S209 Disk harrows
YYB3471 FD209RM 1 1⁄8 sq. DHU1-1/8S209 Disk harrows
Talbot
T151 DS208TT8 1 1⁄8 sq. W208PPB8 DS80MS
Taylor
DS209TTR5 1 ¼ sq. GW209PPB5 Disk harrows DSG85MSA
204147 DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows light duty, 12 ½, 19, 21
204147G DS208TT12A 1 1⁄8 sq. W208PPB19 Disk harrows
204679 DS211TT6 1 ½ sq. W211PPB6 Disk harows, extra heavy duty DS100MS
206090 7⁄8 sq. W208PPB11 Disk harrows
207022 DS211TTR3 1 ½ sq. GW211PPB3 Disk harows, heavy duty DSG100MSA
207359 DS208TTR8 1 1⁄8 sq. GW208PPB8 200000, series disks DSG80MSA
34392 DS208TT13 7⁄8 sq. W208PPB13 DS80MS
606793 DC208TT5 1 1⁄8 sq. W208PP5
Towner
7906 DS208TT8 1 1⁄8 sq. W208PPB8 101 ridgers DS80MS
7992 DC208TT5 1 1⁄8 sq. W208PP5 100, 101 ridger
15013 DS208TT12 1 1⁄8 sq. W208PPB12 101 ridgers, 420, 425 disks
18300 DS211TT6 1 ½ sq. W211PPB6 510, 515, 577, 532, 534, 535, 560, 600, 620, 621, 630 DS100MS
DISK HARROW – DISK BEARINGS 25
DISK HARROW – DISK BEARINGS
MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE
Tufline
T60 DS208TT5 1 1⁄8 sq. W208PPB5 Disk harrows, 1 1⁄8 gang bolts DS80MS
T602 DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows, 1 1⁄8
T603 7⁄8 sq. W208PPB11 Disk harrows with 7⁄8 gang bolt
Tye
552207 DS208TT6 1 sq. W208PPB6 DS80MS
552209 DC208TT5 1 1⁄8 sq. W208PP5
Unverferth
7044 DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS
91134 FD209RB 1 ½ rd. DHU1-1/2R209 Disk harrows
Wanda MFG
481202 DC208TT5 1 1⁄8 sq. W208PP5 Ridger and more
481213 DC211TTR3 1 ½ sq. GW211PP3
481217 DC208TTR17 1 1⁄8 sq. GW208PP17
White
213778B 1 1⁄8 sq. GW208PPB5 Disk harrows with 1 1⁄8"-axle
237092B DS208TT7 1 3⁄16 rd. W208PPB7 251, 252, 253 DS80MS
237909B DS211TTR3 1 ½ sq. GW211PPB3 265, 281 DSG100MSA
238799B FD209RM 1 1⁄8 sq. DHU1-1/8S209 LATE 271, 272 disks
408808D DC210TT2 1 15⁄16 rd. W210PP2 Disk harrows with 1 15⁄16"-axle
W238481B DS208TTR8 1 1⁄8 sq. GW208PPB8 254, 255, 256 DSG80MSA
W238813 FD209RB 1 ½ rd. DHU1-1/2R209 273, 274
Wilrich
24022 DS211TTR2 2 3⁄16 rd. GW211PPB2 Disk harrows DSG100MSA
24677 DC208TTR17 1 1⁄8 sq. GW208PP17
25703 FD211RM 1 ½ sq. DHU1-1/2S211 Disk harrows
30185 FD211RJA 1 15⁄16 rd. DHU11516R211 Do-all seed bed, 1400, 1403
34002 DS209TT4 1.535 rd. W209PPB4 DS85MS
26
VERTICAL TILLAGE – ALL-MAKES
VERTICAL TILLAGE – ALL-MAKES
ALL-MAKES EARTH METAL® COULTERS
17.2-INCH X 4.5-MMPART NO. 87400930
Application: Salford RTS• More aggressive 8-wave design stands up to rugged high-speed
applications, cuts and distributes the soil to prepare the soil bed
20-INCH X 4.5-MMPART NO. 73340375
Application: Salford RTS• Very aggressive 8-wave design stands up to rugged high-speed
applications, cuts and distributes the soil to prepare the soil bed
18-INCH X 4.5-MMPART NO. 87400936
Application: Salford RTS• Less aggressive 13-wave design stands up to rugged high-speed
applications, cuts and distributes the soil to prepare the soil bed
20-INCH X 4.5-MMPART NO. 87400937
Application: Salford RTS• Less aggressive 13-wave design stands up to rugged high-speed
applications, cuts and distributes the soil to prepare the soil bed
22-INCH X 4.5-MMPART NO. 73341695
Application: Salford RTS• Very aggressive 8-wave design stands up to rugged high-speed
applications, cuts and distributes the soil to prepare the soil bed
22-INCH X 6.5-MMPART NO. 73341304
Application: Landoll Vertical Tillage
• Full concavity with R46 center (1.765"/1.826" diameter)• Interchangeable with Landoll part no. 155617
ALL-MAKES EARTH METAL COULTER FOR LANDOLL VT PLUS
SALFORD IS A REGISTERED TRADEMARK OF ©SALFORD FARM MACHINERY LTD.LANDOLL IS A REGISTERED TRADEMARK OF ©LANDOLL CORPORATION
REVERSIBLE POINTS FOR CHISEL PLOWS
14" 2" 5⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 5787
15 ¾" 4 ½" 5⁄16" 2 2 ¼" to 2 ½" ½" no. 3 plow (2) Chisel 602595R3
15 ¾" 4 ½" 5⁄16" 2 2 ¼" to 2 ½" ½" no. 3 plow (2) Chisel 602595R3N
16" 2" 5⁄8" 2 2 ¼" to 2 ½" 7⁄16" no. 3 plow (2) Chisel 87589836
16 7⁄8" 2" 5⁄8" 2 2 ½" ½" no. 3 plow (2) Chisel 601986R1
16 7⁄8" 2" 5⁄8" 2 2 ½" ½" no. 3 plow (2) Spike 602594R1
18" 2" 1" 2 2 ½" Hex ½"x 2 ¾" Chisel 193054A1
19 ½" 2" 7⁄8" 2 2 ½" Hex ½" x 2 ½" Chisel B93368
19 ½" 2" 7⁄8" 2 2 ½" Hex ½" x 2 ½" Chisel B93369*
19 ½" 2" 7⁄8" 2 2 ½" Hex ½" x 2 ½" Chisel B93370
*USE ON HIGH CLEARANCE SHANKS ONLY.
LENGTH SIZE WIDTH THICKNESS NO. OF HOLES HOLE SPACING BOLTS USED STYLE PART NO.
POINTS AND SHOVELSChoose from a complete line of shovels and points—manufactured from durable, high-carbon steel and uniformly heat-treated for superior wear and toughness. They are available in single and double points, heavy-duty spikes, chisels, twisted shovels and heavy-duty, double-pointed shovels.
TWISTED SHOVELS FOR CHISEL PLOWSLENGTH SIZE WIDTH THICKNESS NO. OF HOLES HOLE SPACING BOLTS USED STYLE PART NO.
21 ½" 3" 3⁄8" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, V point 594545R1
21 ½" 3" 3⁄8" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, V point 594546R1
22" 3" ½" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, V point B95242
22" 3" ½" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, V point B95243
26 ½" 3 ½" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, slash point 812384C3
26 ½" 3 ½" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, slash point 812385C3
26 ½" 4" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, slash point 1995505C1
26 ½" 4" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, slash point 1995506C1
PART NO. B95242
REVERSIBLE SHOVELS FOR CULTIVATORS
6 7⁄8" 2" 5⁄16" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 594227R1**
8" 2" 3⁄16" 1 - 3⁄8" no. 3 plow (2) Chisel 25332BA
10" 2 ½" 5⁄16" 2 1 ¼"-2 ¼" 7⁄16" no. 3 plow (2) Chisel 130384
10 1⁄8" 1 ¾" ¼" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 596623R1
11" 2" 3⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 87546271
11" 2 ½" ¼" 2 2"-2 ¼" 7⁄16" special sweep (2) Chisel 25702BA
11 ½" 2" 3⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 811799C3
11 ¾" 2" 3⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel-flared ends 86990834
12" 2" 5⁄16" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 811889C1
14" 2" 5⁄16" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 547188R2
**SINGLE POINT, NOT REVERSIBLE
LENGTH SIZE WIDTH THICKNESS NO. OF HOLES HOLE SPACING BOLTS USED STYLE PART NO.
DEEP TILLAGE 27
DEEP TILLAGE
CHISEL PLOW SWEEPS
CHISEL PLOW SWEEPS28
OLDER NEW HOLLAND MODELS AND SOME ALL-MAKES APPLICATIONS
SIZE THICKNESS PART NO. HOLE SPACING STEM ANGLE
8" ¼" 1547105C1 2 ¼" to 2 ½" 43°
10" ¼" 1547106C1 2 ¼" to 2 ½" 43°
12" ¼" 1547107C1 2 ¼" to 2 ½" 43°
14" ¼" 1547108C1 2 ¼" to 2 ½" 43°
16" ¼" 1547109C1 2 ¼" to 2 ½" 43°
18" ¼" 1547110C1 2 ¼" to 2 ½" 43°
12" 5⁄16" 248517A1 2 ¼" to 2 ½" 43°
14" 5⁄16" 248518A1 2 ¼" to 2 ½" 43°
16" 5⁄16" 248519A1 2 ¼" to 2 ½" 43°
18" 5⁄16" 248520A1 2 ¼" to 2 ½" 43°
CURRENT NEW HOLLAND MODELS AND MOST ALL-MAKES APPLICATIONS
SIZE THICKNESS PART NO. HOLE SPACING STEM ANGLE
8" ¼" 133765A1 2 ¼" to 2 ½" 50°
10" ¼" 133766A1 2 ¼" to 2 ½" 50°
12" ¼" 133767A1 2 ¼" to 2 ½" 50°
14" ¼" 133768A1 2 ¼" to 2 ½" 50°
16" ¼" 133769A1 2 ¼" to 2 ½" 50°
18" ¼" 133770A1 2 ¼" to 2 ½" 50°
12" 5⁄16" 248523A1 2 ¼" to 2 ½" 50°
14" 5⁄16" 248524A1 2 ¼" to 2 ½" 50°
16" 5⁄16" 248525A1 2 ¼" to 2 ½" 50°
18" 5⁄16" 248526A1 2 ¼" to 2 ½" 50°
New Holland chisel
plow sweeps have
2 ¼-inch – 2 ½-inch
combination hole
centers with ½-inch
bolt holes. To
accommodate
chisel plows with 7⁄16-inch bolt holes,
use adapter bolt,
part no. 594243R1
(bolt has ½-inch
head and 7⁄16-inch
shank).
CHISEL PLOW (WHEATLAND) SWEEPS APPLICATION CHART
EARTH METAL CHISEL PLOW SWEEPS
MAKE/MODELHOLE SIZE
HOLE CENTERS
STEM ANGLE
Allis Chalmers 22" – 32" 7⁄16" 2 ¼" 43°
Anderson 7⁄16" 2 ¼" 50°
Brady 7⁄16" 2 ¼" 50°
CASE (some) ½" 2 ¼" 47°
CASE (later models) 7⁄16" 2 ¼" 50°
Case IH and IH ½" 2 ½" 43°
C.C.I.L. 1" thick shank 7⁄16" 2 ¼" 50°
C.C.I.L. 1-¼" thick shank ½" 2 ½" 43°
Crown ½" 2 ¼" 50°
DMI ½" 2 ¼" 50°
Degelmen 7⁄16" 2 ¼" 50°
Edwards 7⁄16" 2 ¼" 50°
Flexi-Coil (2" x 1" shank) ½" 2 ¼" 50°
Ford ½" 2 ¼" 47°
Ford 131 7⁄16" 2 ¼" 50°
Friggstad 7⁄16" 2 ¼" 50°
Glencoe ½" 2 ¼" 47°
Glencoe (high clearance) 7⁄16" 2 ¼" 50°
Graham (high clearance) 7⁄16" 2 ¼" 50°
Hiniker ½" 2 ¼" 50°
Ingham 7⁄16" 2 ¼" 43°
Jeoffery – 16" 7⁄16" 2 ¼" 50°
Jeoffery – 22" – 32" 7⁄16" 2 ¼" 43°
John Deere 7⁄16" 2 ¼" 50°
John Deere (some) ½" 2 ¼" 47°
Kewanee 7⁄16" 2 ¼" 50°
MAKE/MODELHOLE SIZE
HOLE CENTERS
STEM ANGLE
Kilbery 7⁄16" 2 ¼" 50°
Krause (low clearance) ½" 2 ¼" 47°
Krause (high clearance) 7⁄16" 2 ¼" 50°
Leon ½" 2 ¼" 50°
Massey Harris 7⁄16" 2 ¼" 43°
Massey “Trash King” 7⁄16" 2 ¼" 50°
Mel-Cam 7⁄16" 2 ¼" 50°
Mel-Cam Cultiweeder 7⁄16" 2 ¼" 43°
Case IH – 5800 C.P. ½" 2 ½" 50°
Melroe (Clark) ½" 2 ¼" 47°
Minneapolis Moline T600, 1500, 1800
7⁄16" 2 ¼" 50°
Morris 220 7⁄16" 2 ¼" 43°
Morris MP 912 and Magnum ½" 2 ¼" 50°
Noble XR-20 7⁄16" 2 ¼" 50°
Oliver 247, 248, 347 U.S. 7⁄16" 2 ¼" 43°
Oliver 500, 3500 7⁄16" 2 ¼" 43°
Robin-Nodwell 7⁄16" 2 ¼" 50°
Rogin 7⁄16" 2 ¼" 50°
Roll-O-Cone ½" 2 ¼" 50°
Roll-O-Flex 7⁄16" 2 ¼" 50°
Schulte 300 ½" 2 ¼" 50°
Sunflower 7⁄16" 2 ¼" 50°
Versatile 7⁄16" 2 ¼" 50°
Victory 7⁄16" 2 ½" 50°
Wil-Rich ½" 2 ½" 43°
Wil-Rich (early) 7⁄16" 2 ¼" 43°
Long-life, true-width, low-crown design; constant-width wing design maintains cutting width longer that conventional wing sweeps; low-crown for reduced draft and excellent residue flow.
CHISEL PLOW SWEEPS
CHISEL PLOW SWEEPS 29
NON-EARTH METAL® MISCELLANEOUS CHISEL PLOW SWEEPS
PART NO. SIZE THICKNESS ANGLE HOLES HOLE SPACING BOLT SIZE
87589822 14" ¼" 50° 2 2 ¼" ½"
4499 16" ¼" 50° 2 2 ¼" ½"
DART CHISEL PLOW SWEEPS
PART NO. SIZE THICKNESS ANGLE HOLES HOLE SPACING BOLT SIZE
9686 12" ¼" 50° 2 2 ¼" ½"
5785 16" ¼" 50° 2 2 ¼" ½"
294957A1 22" ¼" 43° 2 2 ½" ½"
PENETRATOR DART CHISEL PLOW SWEEPS
PART NO. SIZE THICKNESS ANGLE
87515418 2" ¼" 47°
21460 4" ¼" 47°
21461 5 ½" ¼" 47°
9026 9" ¼" 47°
8503 11" ¼" 47°
SLIMWEDGE™ QUICK CHANGE CHISEL PLOW SWEEPS
QUICK CHANGE ADAPTERPART NO. 87625317
COULTERS
COULTERS30
EARTH METAL® COULTERSYour New Holland dealer offers a full line of fluted, wavy, and straight coulters—allowing for implement customization
to match any trash-cutting requirements, and soil and speed conditions. What’s more, they’re made from durable
Earth Metal steel, making them the toughest coulters on the market.
8 wave deep 87400930 17.6 4.5 4 4 5.25 (133.4) 1.85 (47) Rawson, Salford
73340375 20 4.5 4 4 5.25 (133.4) 2.17 (55) Salford
73341695 22 5 4 5 5.25 (133.4) 2.3 (58) Salford - NEW
8 wave 130800A2 14.3 4 4 8 5 (127) 0.75 (19)
87400932 15.8 4 4 8 5 (127) 0.87 (22) Kinze DG7803
87400933 17.6 4 4 8 5 (127) 1 (26) Great Plains 820-019C
140447A2 18.1 4 4 8 5 (127) 1.06 (27)
13 wave 87400934 14.3 4 4 8 5 (127) 0.63 (16)
87400935 15.8 4 4 8 5 (127) 0.63 (16) Kinze GD9254
87298834 16 4 4 4 5.25 (133.4) 0.63 (16) Kinze GD9255
129195A2 17.6 4 4 8 5 (127) 0.75 (19) Great Plains 820-082C
87400941 17.6 4 3.78 6 5 (127) 0.78 (20)
87400936 18 4.5 4 8 5 (127) 0.75 (19) Salford
87400937 20.4 4.5 4 8 5 (127) 0.87 (22) Salford
443637A1 22 4.5 3.65 4 5 (127) 1.2 (30)
20 wave 87299953* 16 4 4 4 5.25 (133.4) 0.35(9) Kinze, Deere, Great Plains
25 wave 87413627 14.33 4 4 8 5 (127) 0.59 (15)
431542A1* 14.7 4 4 4 5.25 (133.4) 0.63 (16) Yetter 2571-166
87413628 15.8 4 4 8 5 (127) 0.63 (16) Krause 30-228
321165A2 17.6 4 4 8 5 (127) 0.63 (16) Yetter 2571-179
Bubble fluted 140450A2 15.8 4 4 8 5 (127) 0.75 (19) Kinze GD7804
COULTER TYPE PART NO.
DIAMETER (IN.)
THICKNESS (MM)
CENTER HOLE DIA. (IN) NO. OF HOLES
BOLT CIRCLE (INCHES/MM)
CUTTING WIDTH (IN/MM) TYPICAL USES
Straight coulter disk
87584040 15 5 1 ½ 4 4 (101.1) Straight
31399R1 17 4 1 ½ 4 4.5 (114.3) Rippled
1344516C1* 17 4 4 4 5.25 (133.4) Rippled Yetter 2571-158
87299128 17 4.5 2 6 3.5 (88.9) Notched Kinze GD12676
SBP220303B* 18.1 4 4 4 5.25 (133.4) Rippled White/Ford Plows
141205C2 18.4 4 2.6 4 4.25 (108) Straight
443627A1 20.4 4.5 3.6 4 5 (127) Rippled
443626A1 20 4.5 3.6 4 5 (127) Straight
28341R1 20.4 4.5 1 ½ 4 4.5 (114.3) Rippled
T54196 20.4 4.5 4 4 5.25 (133.4) Rippled White/Ford Plows
SBP219537B* 20 4.5 3.5 4 5.25 (133.4) Rippled White/Ford Plows
122567C1 22.6 4.5 1 ½ 4 4.5 (114.3) Rippled
443635A1 22.6 4.5 3.6 4 5 (127) Straight
443638A1 24.8 4.5 3.6 4 5 (127) Straight
COULTER TYPE PART NO.DIAMETER
(IN.)THICKNESS
(MM)CENTER HOLE
DIA. (IN) NO. OF HOLESBOLT CIRCLE (INCHES/MM)
EDGE TYPICAL USES
*NOT EARTH METAL
COULTERS
COULTERS 31
Straight coulter disk (two sets of holes) 87400939 16 4 4
4 5 (127)
8 5.25 (133.4)
140445A2 17 4 44 5 (127)
8 5.25 (133.4)
Straight coulter (center hole only)
812362C1 20.4 4.5 1.25 - -28597R1 20.4 5 1.5 - -790-1002 20.4 6.5 1.5 - -
COULTER TYPE PART NO.DIAMETER
(IN.)THICKNESS
(MM)CENTER HOLE
DIA. (IN) NO. OF HOLESBOLT CIRCLE (INCHES/MM)
PLOW THROUGH THE FIELD IN NO TIMEWhen it comes to seedbed preparation, we are the perfect partner—helping you find the right tool for your application. We offer an extensive line of durable, high-performance moldboards, shares, shins and landsides that can cut your plowing work in half. Only we have access to a full line of parts for plows that will keep you moving this harvest.
MOLDBOARD PLOWS
MOLDBOARD PLOWS32
MOLDBOARDS
MAKE DESCRIPTIONPLOW
BOTTOM PART NO.
Ford 14" general purpose R.H. 251440DS
Ford16" general purpose - R619 series
R.H. 251441DS
Ford 16" general purpose R.H. 251442DS
Ford18" general purpose - R619H series
R.H. 251443DS
Ford18" general purpose - R619 series
R.H. 251444DS
Ford 18" general purpose L.H. 251574DS
IH/Case IH 14" R.H. ST462313DS
IH/Case IH 16"-18" R.H. ST462314HXDS
Massey Ferguson 16"-18" heavy duty R.H. ST660204DS
White/Oliver 16" R.H. 251441DS
White/Oliver 18" R.H. 251444DS
White/Oliver 18" R.H. 251443DS
Wil-Rich 16"- 18" R.H. ST14258
PLOW SHARES
MAKE DESCRIPTIONPLOW
BOTTOM PART NO.
2- AND 3-BOLT SHARES
Ford 12" R.H. 251419DS
Ford 14" R.H. 251421DS
Ford 16" R.H. 251424DS
4-BOLT SHARES
Ford 12" R.H. 251422DS
Ford 14" heavy duty R.H. 251423DS
Ford 16" short, heavy curve R.H. 251430DS
Ford 16" R.H. 251426DS
Ford 16" heavy curve R.H. 251427DS
Ford 16" heavy duty R.H. 251428DS
Ford 16" heavy curve L.H. 251565DS
Ford 16" heavy duty L.H. 251429DS
IH/Case IH 14" full upset R.H. ST463236R1
IH/Case IH 16" full upset R.H. ST463237R1
IH/Case IH 18" full upset R.H. ST463238R1
IH/Case IH 16" deep suck R.H. ST463253R1
IH/Case IH 18" deep suck R.H. ST463254R1
IH/Case IH 18" deep suck L.H. ST464591R1
IH/Case IH 16" full upset R.H. ST464582R1
IH/Case IH 18" full upset R.H. ST464583R1
Massey Ferguson 16" ribbed R.H. STMF164RSDS
Melroe/Morris 18" for 806 RR Plows R.H. STP6526829
Melroe/Morris 16" for 806 RR Plows R.H. STP6526832
White/Oliver 18" full curve L.H. 251566DS
White/Oliver 16" full, heavy curve R.H. 251427DS
White/Oliver 16" narrow, heavy curve R.H. 251430DS
White/Oliver 16" hard-surfaced, heavy curve R.H. 251427HDS
White/Oliver 16" heavy curve R.H. STRD16RDS
Wil-Rich 18" R.H. ST14255
5-BOLT SHARES
Ford 18" heavy curve R.H. 251431DS
Ford 18" short, heavy curve R.H. 251434DS
Ford 18" heavy curve L.H. 251566DS
White/Oliver 18" full, heavy curve R.H. 251431DS
White/Oliver 18" narrow, heavy curve R.H. 251434DS
White/Oliver 18" hard-surfaced, heavy curve R.H. 251431HDS
White/Oliver 18" hard-surfaced, heavy curve L.H. 251566HDS
MOLDBOARD PLOWS
MOLDBOARD PLOWS 33
LANDSIDES / WEARPADS
MAKE DESCRIPTIONPLOW
BOTTOM PART NO.
Ford9 3⁄8" long with 7⁄16" bolt
Front R.H. 251448DS
Ford15 1⁄8" long with 7⁄16" bolt
Rear R.H. 251449DS
Ford14"-16"-18" landside
R.H. 251578DS
FordLandside pad for 251578DS
251579DS
IH/Case IH4 ½" x 5⁄8" x 12 5⁄8" landside
R.H. ST59057C1
IH/Case IH4 ½" x 6" landside pad
ST59058C1
Massey Ferguson 12"x 9⁄16" landside R.H. ST475937HXDS
Melroe/Morris ½" x 6" landside pad for 806 RR plows
STP6526852
White/Oliver 9⁄16" x 5" x 9⁄16" flat landside
251578DS
White/Oliver 7 ½" x ½" landside pad
251579DS
Wil-Rich 12" x 9⁄16" landside ST14253
Wil-Rich4 ½" x ½" x 6" landside pad
ST14256
PLOW SHINS
MAKE DESCRIPTIONPLOW
BOTTOM PART NO.
Ford 12" through 18" RH R.H. 251435DS
Ford14"-16"-18" general purpose - R619 series
R.H. 251437DS
Ford 20" general purpose R.H. 251439DS
Ford14"-16"-18" general purpose - R619 series
L.H. 251571DS
IH/Case IH 14"-16"-18" R.H. ST522325R12
Massey Ferguson 14" through 18" R.H. ST660020HXDS
Melroe/Morris 16"-16"-18" for 806 RR Plows
R.H. STP6522182
White/Oliver 12" through 18" R.H. 251437DS
White/Oliver 12" through 18" L.H. 251571DS
White/Oliver 20" R.H. 251439DS
Wil-Rich 16"- 18" R.H. ST14257
PART NO. STHS151DS
TRASHBOARDS
DESCRIPTION PART NO.
Case, Ford, Morris, Wil-Rich STHS151DS
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
EARTH METAL® DISK OPENERS FOR ALL-MAKESTRUST ONLY THE BEST FOR YOUR PLANTER OR DRILL
PLANTERS – OPENERS
HEAVY-DUTY DISK OPENER ASSEMBLY FOR KINZE PLANTERSPART NO. 428354A1
Application: Opener Disk Assembly – H.D.Size: 381mm (15") x 3.5mmManufacturer Part No. Reference: Kinze GA8324
TOP SELLER TO FIT GREAT PLAINS MODELSPART NO. 416443A1
Application: Opener Disk Assembly FlangeSize: 343mm (13-1/2") x 3mmManufacturer Part No. Reference: Great Plains 107-054S
HEAVY-DUTY DISK OPENER TO FIT SUNFLOWER & AG COPART NO. ZSN18358
Application: Opener Disk AssemblySize: 381mm (15") x 3.5mmManufacturer Part No. Reference: Sunflower/Agco SN9753N
PLANTERS – OPENERS34
PLANTERS – OPENERS
PLANTERS – OPENERS
PART NO. APPLICATION SIZE MANUFACTURER PART NO. REFERENCE ONLY
416443A1 Opener disk assembly 343mm (13 ½") x 3mm Lillison-Melrose 6603280/1
416010A1 (bearing kit 435483A1) Opener disk blade only 381mm (15") x 3.5mm Sunflower-Best 7176/DR800008
416015A1 (bearing kit 435483A1) Opener disk blade only 330mm (13") x 3mm Marliss, Sukup, Best, M&W
416442A1/B1980615C1 Opener disk 343mm (13 ½") x 3mm Tye-Uft 540-647/012
416015A1 (bearing kit 435483A1) Opener disk blade only 330mm (13") x 3mm Marliss-Sukup-M&W 701010
416442A1/B1980615C1 Opener disk assembly 343mm (13 ½") x 3mm Krause 5250-484-OALH
410526A1 Opener disk assembly 343mm (13 ½") x 3mm 5250-484-OARH
416442A1 Opener disk assembly L.H. 343mm (13 ½") x 3mm Crustbuster 863597LH
416442A1 Opener disk assembly R.H. 343mm (13 ½") x 3mm 863597RH
B500276 Opener disk assembly lead 381mm (15") x 3mm 859090
416443A1 Opener disk blade only plain 343mm (13 ½") x 3mm 863597
435480A1 Bearing kit (2 bearings and bolts) 400580/401042
141464C92 Opener disk assembly Fert. 343mm (13 ½") x 3mm John Deere AA27458
B500276 Opener disk assembly (AA20242) 381mm (15") x 3mm AA37474
133480A1 (bearing kit 419594A1) Opener disk – J.D. 750/1850 460mm (18 1⁄10") x 5mm Deere N283804
428354A1 Opener disk assembly – H.D. 381mm (15") x 3.5mm Kinze GA8324
B500276 Opener disk assembly 381mm (15") x 3mm GA2013
416443A1/B1980616C1 Opener disk assembly. New flange 343mm (13 ½") x 3mm Great Plains 107-054S
ZSN18358 Opener disk assembly 381mm (15") x 3.5mm Sunflower/Agco SN9753N
84389196 Disk assembly 356mm (14") x 3.5mm 800-955 Case IH planters
84389195 Disk assembly 356mm (14") x 3.5mm 800-955 Case IH planters
1344911C3 Opener disk assembly 366mm (14") x 2.5mm 5300, 5400, 5500 Case IH drills
603020R92 Grain drill opener disk assembly 14" x 3mm 5100, 5200, 6200, 6300, IH 10, 100, 510, 620
ALL-MAKES – EARTH METAL® OPENER ASSEMBLIES
PART NO. APPLICATION SIZE
84398745 Disk assembly 356mm (14") x 3.5mm
84398746 Disk assembly 356mm (14") x 3.5mm
84416318 Disk assembly 356mm (14") x 4.5mm
84416319 Disk assembly 356mm (14") x 4.5mm
141464C92 Fertilizer opener disk assembly 343mm (13 ½") x 2.5mm
1277891C91 Covering disk assembly 8" x 2mm
EARTH METAL® OPENER ASSEMBLIES FOR NEW HOLLAND SP PLANTERS
35
MINI HOPPER ENHANCEMENT KITSPART NO. 47532784 PART NO. 47556260 (SPLIT ROW)Application: SP580
• An easy-to-assemble, quick-attach snorkel that slows down seeds to prevent clogging.
• Fills automatically for normal field operation and manually for plot-planning
• Mini hopper enhancement kit tool sold separately (part no. 47532734)
NEW
• Places seed 1 inch above and 1 inch beside the fertilizer
• Wing forces soil into the fertilizer trench to provide separation from seed
• Can be used with all press wheels• Available in standard or long-life
carbide
SIDE BAND
PART NO. DESCRIPTION
Standard Carbide
87506407 22846 LH sideband
87506409 22847 RH sideband
AIR HOE DRILLS – STEALTH OPENERS
AIR HOE DRILLS – STEALTH OPENERS
The Stealth opener is a modular system that adds versatility to your row seeding. A choice of tips or attachments mount to the main body. Replaceable tips promote long-life and customization.
STEALTH® OPENERS
Stealth openers use replaceable tips that work for both narrow-row and spread-row seeding styles.
SINGLE SHOOT
Stealth double-shoot attachments allow one-pass placement of seed and fertilizer. Seed/fertilizer separation prevents seedling damage.
DOUBLE SHOOT
36
PART NO. DESCRIPTION
Standard Carbide
87506287 87505195 Gumbo
87506283 87506293 Standard
KNIFE TIPS• Low soil disturbance• Very narrow spread of 7⁄8 to 1 inch• For use with any press wheel• Heavy-duty, gumbo or carbide tips
match soil condition.
• Seed is placed 1 inch above and 1 to 2 ½ inches on both sides of the fertilizer
• 3-inch size available in HS format for heavy soils and gumbo, and in LS format for light soils and sandy loam
• 3-, 4- and 5-inch sizes available in carbide for extended wear that helps to maintain integrity of seedbed over the full life of the opener; designed to force soil into the fertilizer trench, providing separation from the seed
• For use with press wheels that match row widths
PAIRED ROW
PART NO. DESCRIPTION
Standard Carbide
87506291 87506295 3-inch paired row
87506292 N/A 3-inch paired row light soild
87506261 22848 4-inch paired row
87506294 22849 5-inch paired row
SPREAD TIPS• Designed for low-disturbance
seeding• Wider product spread allows more
fertilizer to be placed with the seed• Spread tips are available in
3-, 4- or 5-inch sizes• For use with press wheels that
match row widths
PART NO. DESCRIPTION
Standard Carbide
84193957 84193966 3-inch spread
84193961 84193981 4-inch spread
87506290 87563695 5-inch spread
PART NO. 87506290
The rugged C-shank and trip design allow for use with a wide range of opener styles. Choose 350-pound trips for most soil types, or 550-pound trips for rugged conditions and double-shoot applications. Mount an optional one-bar, ½-inch tine harrow behind the rear shanks for added leveling and row closing.
AIR HOE DRILLS – SEED METERING AND TRIPS
PART NUMBER
# OF RUNS EXTRA FINE FINE COARSE EXTRA COARSE
2 GL-512S.1 GL-522S.1 GL-532S.1 GL-992SV1
3 GL-513S.1 GL-523S.1 GL-533S.1 GL-993SV1
4 GL-514S.1 GL-524S.1 GL-534S.1 GL-994SV1
5 GL-515S.1 GL-525S.1 GL-535S.1 GL-995SV1
6 GL-516S.1 GL-526S.1 GL-536S.1 GL-996SV1
7 GL-563SV1 GL527SV1 GL-537SV1 GL-997SV1
8 GL-518S.1 GL-528S.1 GL-538S.1 GL-998SV1
PART NO. DESCRIPTION
TP-351A 350-lb trip
87686090 550-lb trip
PART NO. DESCRIPTION
87506241 50° no offset
87506243 50° - 2 ¼-inch-left offset
87506242 50° - 2 ¼-inch-right offset
87500716 50° - 3 1⁄8-inch-left offset
87500715 50° - 3 1⁄8-inch-right offset
87506280 47° - no offset
87506281 47° - 2 ¼-inch-left offset
87506282 47° - 2 ¼-inch-left offset
METER ROLLERS
SHANKS
SEED METERS
TRIPS
NEW HOLLAND AIR CART METERING SYSTEMS ENSURE ACCURATE SEEDING, EVERY TIME. What crops do you seed now? How will that change next year, or three years from now? Whatever your plan, a range of meter roller designs provide you with accurate metering and efficient operation. Meters accommodate products ranging in size from the smallest forage seed to the largest bean—inoculated, treated or not—plus a wide range of fertilizer applications.
SELECT FORM THESE ROLLER OPTIONS:
Extra Fine: for micronutrients or very small seeds such as alfalfa, grass, canola and grain sorghum, at very low rates
Fine: for wheat, barley, oats, flax, millet and moderate rates of fertilizer
Extra Coarse: for very large, fragile seeds such as peas and large beans, and high rates of fertilizer
Coarse: for solid-seeding, larger crops such as corn and beans at high rates
37
AIR HOE DRILLS – SEED METERING AND TRIPS
CHOOSE YOUR SHANK STYLES AND TRIPS
PART NO. ID (INCHES) COLOR
4726 1 Clear/white helix
86993485 1 Black
73342889 1 Black
412786A1 1.25 Clear
84346017 1.25 Black
73342890 1.25 Black
350447A1 1.5 Black
73358256 1.5 Clear
6401 1.75 Clear
86992281 1.75 Black
1018883 2 Clear/white helix
241305A1 2 Black
3680 2.5 Clear/white helix
86992286 2.5 Black
73342891 2.5 Black
1978963CX 2.5 Black/urethane lined, extended wear
Your New Holland dealer offers PVC, low-pressure hose, sold by the foot, in sizes from 1 inch to 2.5 inches in diameter for air seeder applications.
AIR SEEDER HOSES
FLAT-FACED PACKER TIREPART NO. 290719A1
• Preferred for its ability to leave the field exceptionally smooth
• 6.5 inches x 15 inches • Pack the entire width of the
ribbon or row • Sustains minimal stubble
damage due to the thicker rubber on the flat face and the four-ply side
FOUR-PLY PACKER WHEELPART NO. 47357837
Application: P2070 precision hoe• 4.8 inches x 8 inches,
smooth wheel
HEADER STAND ELBOW
PART NO. DESCRIPTION
GP-103 Standard elbow
GP-102 High abrasion elbow
AIR HOE DRILLS
AIR HOE DRILLS38
LOW DISTURBANCE NH3 KNIVESPART NO. 47433844 (L.H.)PART NO. 47433845 (R.H.)
• Hard surfaced for extended acreage
L.D. SWEEP OPTIONSPART NO. 1032199 PART NO. 1032199N (ECONOMICAL IMPORT OPTION)6-inch sweep
PART NO. 1027915 PART NO. 1027915N (ECONOMICAL IMPORT OPTION)11-inch sweep
PART NO. 1033379 PART NO. 1033379N (ECONOMICAL IMPORT OPTION)13-inch sweep
PART NO. 87298812 L.D. 11-inch hard-faced sweep
PART NO. 87298813 L.D. 13-inch hard-faced sweep
PART NO. 87298811 L.D. 6-inch hard-faced sweep
PART NO. DESCRIPTION
47446028 25- and 30-foot kit
47446031 40-foot kit
Our clear rain and debris kit protects seed meters from the
elements—shielding the meter area from rain, overspray during
power-washing, and tire spray during transport. It also keeps dirt
clods, crop residue, gravel and small stones from getting into the
meter rolls. Two rain and debris kits are required per disk drill.
P2080/P2085 DISK DRILLS
P2080/P2085 DISK DRILLS 39
PART NO. DESCRIPTION CROP TYPE
84389793 Extra-fine roller Sorghum/milo, canola
84389792 Fine roller Flax, sorghum/milo
84389771 Coarse roller Barley, oats, rice, soybeans, wheat
PART NO. DESCRIPTION
84327548 Double castor and fixed rear wheel
GD-161A Single castor
84472211 High-flotation double castor and rear wing
RAIN AND DEBRIS KITS
SEED METERS
SERVICE SPINDLE ASSEMBLIES
EARTH METAL® OPENER DISKPART NO. 87488385
Application: P2080/P2085• 18 inches x 5 millimeters
GAUGE WHEEL ASSEMBLIESPART NO. 21618
Application: P2080/P2085• 4 inches x 16 millimeters
SEED LUBE/PAINT
SEED LUBE/PAINT
PART NO. DESCRIPTION
1132221N 12 oz. / 340 g
991049R2 1 qt. / 946 ml
1131548R2 1 gal. / 3.78 L
PART NO. APPLICATION
407408R1 14 oz. aerosol - No. 3
547596R1 1 qt. / .95 L - No. 1
1131916R1 1 gal. / 3.79 L - No. 1
TILCOATTilcoat is a specialized, oil-based coating designed to protect valuable field equipment during non-use periods.• Formulated to release from tillage tools upon their insertion
and use in the ground• Lead-free formula that dries to a non-toxic film and provides
short-term protection• Fast scouring, resists rust and easy to apply• Suggested applications include
tillage equipment, moldboards, plow shares, disks, sweeps and shovels
PENETRATING OILPART NO. B505502 12 oz. / 340 g
• Loosens rusted parts• Prevents corrosion on tools
and other parts• Dries out wet
engine parts• Stops binding
and squeaks
CHAIN AND CABLE LUBEPART NO. B505500 12 oz. / 340 g
• For use on construction and agricultural equipment
• Helps protect against rust and corrosion
• Fast penetrating action• Reduces chain wear
and increase life of chain and cables
• Resists high-temperature breakdown
• Heavy viscosity reduces throw-off
TALC/GRAPHITE SEED LUBRICANTIronGard™ seed lubricant is available for any type of planter, whether gravity or airflow. The proper use of seed lubricant prevents bridging in the hopper and reduces wear on moving parts in the seed meter.
NON-STICK GRAPHITE LUBRICANTSpray, brush or roll non-stick graphite lubricants onto any metal or wood surface to reduce sliding friction on chains and sprockets, hitches, overhead door tracks, winches, and hinges. This lubricant also works for the seed drum seal wearing ring and marker alternator of Cyclo planters, and as a surface conditioner on gravity boxes, hoppers, chutes, moldboards, planters and markers, forage boxes and wagon beds.
PART NO. DESCRIPTION APPLICATIONS
73341461 1 lb. 100% graphite All makes
73341462 8 lb. 100% graphite All makes
73341463 1 lb. 80% talc, 20% graphite All makes
73341464 8 lb. 80% talc, 20% graphite All makes
407486R1 1 lb. 100% graphite, fine particle size All makes
73340733 8 lb. 100% graphite, fine particle size All makes
73340734 1 lb. 50% talc, 50% graphite, fine particle size New Holland SP planters
73340370 8 lb. 50% talc, 50% graphite, fine particle size New Holland SP planters
73340918 Dispensing cap 8 lb. container
40
SEED LUBRICANT
Graphite seed lubricant provides lubrication for the seed delivery and seed meter components. For best coverage and performance with bulk fill, apply graphite seed lubricant either with an applicator on the seed tender or as the seed enters the tank. Refer to the planter operator’s manual for lubricant application rates for new planter hoppers and first fill. Also, set vacuum only as high as necessary to hold seeds to the seed disk; excessive vacuum accelerates seed disk and seed meter housing wear, makes singulation more difficult, and requires more oil flow and power to operate the fan.
SMART TIP
SEED LUBE/PAINT
LIFEBLOODS FOR ALL EQUIPMENT—
BOTH LEGACY AND NEW.
©2014 CNH Industrial America LLC. New Holland is a registered trademark of CNH America LLC.
Simplify your shed with fluids for every application. New Holland lifebloods are the only fluids tested and recommended for your New Holland equipment by our expert engineers. New Holland fluids assure longer service intervals, higher performance and better-preserved machine equity. Don’t subject your equipment to the risk of unknown fluids—choose New Holland lifebloods.
PART NO. 87298942 73342896 73340374 73340677
Category 4 4 5 5
A= draw pin size 1 ½" or 2" 1 ½" or 2" 2 ¾" 2 ¾"
B= ball housing diameter 5 ½" 5 ½" 6 5⁄8" 6 5⁄8"
C= receiver width 4" 4" 4" 4"
D= draw pin to hole mtg 7" 7" 7 3⁄8" 6 5⁄8"
E= overall length 11" 11" 12" 12"
F= height (for drawbar strap) 2 ¾" 2 ¾" 3 3⁄8" 3 3⁄8"
G= bolt hole size 1" 1" 1" 1 5⁄8" pin
H= bolt hole distance 2 ¼" 2 ¼" 2 ¼" -
Number of bolt holes 2 3 2 1
J= receiver height 4 ½" 6 ¾" 4 ½" 4 ½"
K= hole center to back of receiver 1 ¼" 1 ¼" 1 ¼' 2"
L= ball housing thickness 2" 2" 2 3⁄8" 2 3⁄8"
Weight 31 lbs 37 lbs 35 lbs 35 lbs
HITCH PARTS
HITCH PARTS42
BULL PULL™
Give the connection between your tractor and implement the attention it deserves with Bull Pull: • Eliminates backlash for precise control• Heavy-duty for heavy loads• Easy to install• Increases the life of drawbars• Superior construction means
more pulls for your money
HARROW TEETHReplacement harrow teeth (shown in quantities of one) for a variety of implement manufacturers; heat-treated point.
PART NO. DESCRIPTION WIDTH LENGTH WEIGHT (LBS.)
SPC560216E Full diamond, 7⁄16" thread 5⁄8" x 7⁄8" 8" 0.6
SPC560217E Full diamond, ½" thread 5⁄8" x 7⁄8" 8" 0.6
SPC560218E Full diamond, 7⁄16" thread 5⁄8" x 7⁄8" 8 ½" 0.6
SPC560219E Full diamond, ½" thread 5⁄8" x 7⁄8" 8 ½" 0.6
SPC560220E Full diamond with head 5⁄8" x 7⁄8" 8" 0.62
SPC560221E Full diamond, no head 5⁄8" x 7⁄8" 8" 0.58
SPC560231E Square, no head 5⁄8" 8" 0.85
SPC560232E Square with head 5⁄8" 10" 1.05
SPC560234E Square with head 5⁄8" 12" 1.25
SPC560236E Square with head 5⁄8" 14" 1.45
SPC560240E Square, no head ¾" 8" 1.13
SPC560242E Square, no head ¾" 9" 1.25
SPC560245E Square with head ¾" 10" 1.45
SPC560247E Square with head ¾" 11" 1.52
SPC560249E Square with head ¾" 12" 1.8
SPC560251E Square with head ¾" 14" 2.1
H JF
D KG
E
LC
BA
FULL DIAMOND, NO HEAD
FULL DIAMOND WITH HEAD
FULL DIAMOND WITH THREAD
SQUARE, NO HEAD
SQUARE WITH HEAD
HITCH PARTS
HITCH PARTS 43
SIZE INDIVIDUAL COLOR CODE
½ inch 350704A1 Red5⁄8 inch 350703A1 Orange
¾ inch 350706A1 Yellow
1 1⁄8 inch 350747A1 Black
1 ¼ inch 350702A1 Green
1 7⁄16 inch 350701A1 Blue
1 ½ inch 350705A1 Silver
1 5⁄8 inch 350746A1 Black
4 inch 350845A1 Silver
HYDRAULIC CYLINDER DEPTH STOPSRustproof and lightweight stops are available for cylinder with shafts up to 2 ½ inches. Made from hardened,
high-density aluminum, these stops have an integral one-piece design that is easy to use and store. Our stops
are color coded to help with keeping things level from side to side.
HYDRAULIC HOSE ASSEMBLIESWHEN THE PRESSURE IS OFF, WHO DO YOU TRUST?When the loss of hydraulic pressure slows productivity, count on your New Holland dealer. He understands the pressure of your business, and stocks a wide range of OEM hose assemblies and bulk components.
CYLINDER STROKE CONTROL SEGMENTSDesigned to control the stroke on air or hydraulic cylinders; unique “Finger Tab” design on aluminum and steel models for easier installation and removal; clamshell package
PART NO. DESCRIPTION SEGMENTS PACAGE QTY.
87299447 Fits 1 3⁄8" and 1 ½" diameter shafts; aluminum; no finger tabs ¾", 1", 1 ¼", 1 ½" 1
87299448 Fits 1 1⁄8" and 1 ¼" diameter shafts; aluminum; no finger tabs ¾", 1", 1 ¼", 1 ½" 1
87299450 Fits 1 1⁄8", 1 ¼", 1 3⁄8" and 1 ½" diameter shafts; aluminum; finger tabs ¾", 1", 1 ¼", 1 ½" 1
87299451 Fits 1 ¾", 1 7⁄8" and 2" diameter shafts; aluminum; finger tabs 1", 1 ½", 2", 4" 1
87299447 87299448
87299450 87299451
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
PLOW BOLTS
PLOW BOLTS44
NO. 3 FLAT-HEAD PLOW BOLTS WITH SERRATED FLANGE NUTSPART NO. LENGTH SETS PER BOX
3⁄8 — 16P2024481 1 ¼" 50
P2024483 1 ½" 50
7⁄16 — 14
P2024490 1 ¼" 50
P2024492 1 ½" 50
P2024494 1 ¾" 50
P2024496 2" 50
P2024498 2 ¼" 50
P2024500 2 ½" 50
P2024502 3" 25
½ — 13
P2024503 2" 50
P2024504 2 ¼" 50
P2024506 2 ½" 50
PART NO. LENGTH SETS PER BOX
3⁄8 — 16
P2024470 1 ½" 50
P2024472 1 5⁄8" 50
P2024474 1 ¾" 50
CONTOUR-HEAD PLOW BOLTS WITH SERRATED FLANGE NUTS
For convenience, the most popular plow bolts are available in packages that include bolts and serrated flange nuts for field cultivator sweeps, chisel plow shovels, Danish tine sweeps and many other tillage applications.
WHY NEW HOLLAND PLOW BOLTS?• Competitive pricing• Hardware is coated in environmentally friendly trivalent
chromium, eliminating the health and environmental concerns of previous hexavalent coatings
• Bolts are heat-treated to SAE J429 Grade-5 specifications
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
Storing your machine models and accessing parts is made easier with My Shed and My Shed Mobile App 2.1. Our apps offer.
Machine Management: enter serial number, hours and notesParts Manuals: access assembly diagrams and create part pick lists24/7 Dealer Connection: email part pick lists to a dealer
Toolboxes: Disk Blade Selector, Preservative Calculator, Oil/fluid Guide and Battery FinderMachine Info: product alerts and videos
MAKE THE SMART CHOICE AND REGISTER TODAY AT: PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
Apple® Store for iPhone®
Google Play™ for Android™
©2014 CNH Industrial America LLC. New Holland is a registered trademark of CNH America LLC.
IN THE FIELD? NOT A PROBLEM.
ORDERING PARTS ONLINE COULDN’T BE EASIER.
EZ-GUIDE 250 FM-750 FM-1000 INTELLIVIEW IV
FEATURES
Size of color screen 4.3" 8.0" 12.1" 10.4"
Touchscreen - • • •
Video camera inputs - 2 4 3
GPS receiver 1 1 2 1
GLONASS compatibility - • • •
CORRECTION SERVICES
CenterPoint™ RTK <1" (2.5 cm) accuracy
- • • •
CenterPoint™ VRS™ <1" (2.5 cm) accuracy
- • • •
CenterPoint™ RTX™ 1.5" (3.8 cm) accuracy
- • • •
OmniSTAR® HP/XP 2-4" (5-10 cm) accuracy
- • • •
OmniSTAR® G2 3-4" (8-10 cm) accuracy
- • • •
RangePoint™ RTX™
6" (15 cm) pass-to-pass 20" (50 cm) repeatable
- • • •
SBAS (WAAS) 6-8" (15-20 cm) accuracy
- • • •
PRODUCT COMPATIBILITY
EZ-Steer® • • • -
EZ-Pilot™ - • • -
AutoPilot™ - • • -
Implement control - - • -
Row guidance - - • •
COMPARISON GUIDE: EZ-GUIDE® 250, FM-750™, FM-1000™ AND INTELLIVIEW IV DISPLAYS
CHOOSE FROM 7 DIFFERENT PATTERNS
Headland
Pivot
Identical curve
A-B pattern
FreeForm™
A+ pattern
Multi headlands
PRECISION FARMING
PRECISION FARMING46
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
ACCURACY: BIG PAYBACK ON YOUR TILLAGE INVESTMENT
Achieving lower operating costs is a multifaceted challenge—but precision farming can play a bigger part than you may think. Accuracy during tillage is often perceived as a lower priority than when seeding or planting, but it can still have a large impact on your overall costs. Less tilling overlap means less time in the field, which means less wear and tear on your machine and implement, and less fuel usage. The ultimate result? You guessed it: lower operating costs.
See below for some of the available accuracy options, and see the chart to the left for steering choices.
SMART TIP
PRECISION FARMING
47PRECISION FARMING
EZ-STEER® ASSISTED-STEERING SYSTEMThe EZ-Steer assisted-steering system provides simple, portable, hands-free farming for more than 1,200 vehicle models—old and new. The EZ-Steer system turns the steering wheel by combining a friction wheel and electric motor with guidance from an EZ-Guide® 250, FM-750™ or FM-1000™ display, giving you efficient, low-stress steering capabilities. It is ideal for broad-acre farming applications that don’t require extremely accurate positions.
EZ-STEER SYSTEM FEATURES:• Easy disengagement when you manually turn the steering
wheel for quick manual steering when desired
• The EZ-Steer system motor easily locks away from the steering wheel when not in use
• Easy installation and transferability from vehicle to vehicle
EZ-PILOT™
The EZ-Pilot assisted steering system turns the steering wheel for you with an electric motor drive using GPS guidance from the FM-750™ display and FM-1000™ display. While the EZ-Pilot system keeps you in line, you can focus on many different tasks, such as sprayer or planter performance, improving job quality and crop yields.
• T3™ enhances terrain compensation technology and immediately adjusts vehicle steering to compensate for rough terrain or slopes and hillsides
• Fast-reacting motor allows system to quickly get the vehicle in line and stay there
• Steering system can be installed onto existing steering wheels and used with telescoping steering wheels
• Allows for FreeForm™ steering
• Better steering of vehicles with more rigid power steering systems, such as floaters
• Motor integrated into the steering column provides clear access to all instrument panels without a decrease in cab legroom
AUTOPILOT™ AUTOMATED STEERING SYSTEMThe Autopilot™ automated steering system provides integrated, high-accuracy steering in any field type—hands-free. The Autopilot system automatically steers your vehicle—with speeds up to 30 mph (40 kph)—for maximum precision and increased productivity. It is ideal for the most demanding row crop farming applications.
THE AUTOPILOT SYSTEM:• Automatically steers your vehicle
• Integrates directly into your vehicle’s hydraulics for reduced clutter in cab
• Plugs in to many guidance-ready vehicles, minimizing the need for additional equipment
CenterPoint™ RTX™
1.5”OmniSTAR® XP/G2
3-5”RangePoint™ RTX™
6”SBAS (WAAS)
6-8”
From replacement engines to individual components, your New Holland dealer offers a wide range of remanufacturedparts for your New Holland equipment. All parts are re-engineered to meet or exceed
OEM specificationand cost 20 to 40 percent less than new parts. And we support each of our parts with an industry-leading warranty*. You’ll appreciate the value. Your equipment will appreciate the performance.
* When installed by a New Holland dealer.©2014 CNH Industrial America LLC. All rights reserved. New Holland is a registered trademark of CNH Industrial America LLC.
FOR A COMPLETE LIST OF REMANUFACTURED PARTS,SEE YOUR LOCAL NEW HOLLAND DEALER OR VISITPARTSTORE.AGRICULTURE.NEWHOLLAND.COM TODAY.
HIGH QUALITY. LOW PRICE.
SMART VALUE.
CNH Industrial New Corporate logo
AW_CNHI_ Reman_CMYK.ai
AC
03 12 2013
CMYK0. 90. 100. 23
CMYK0. 0. 0. 100
REMAN
REMAN
WARRANTIES FOR NEW HOLLAND REMANUFACTURED PARTS
49
WARRANTY PERIOD
DEALER INSTALLED NOT DEALER INSTALLED
Parts Labor Parts Labor
Remanufactured products not listed below 6 months Yes Yes Yes No
REMAN ENGINES/COMPONENTS
Replacement engines 24 months Yes Yes Yes No
Long block engines 24 months Yes Yes Yes No
Short block engines 12 months Yes Yes Yes No
Cylinder heads 6 months Yes Yes Yes No
Connecting rods 6 months Yes Yes Yes No
Fuel injectors 12 months Yes Yes Yes No
Turbochargers 12 months Yes Yes Yes No
Fuel injection pumps 12 months Yes Yes Yes No
REMAN DRIVELINE
Clutches 12 months Yes Yes Yes No
Axles 12 months Yes Yes Yes No
Torque converters 12 months Yes Yes Yes No
Power shuttles 12 months Yes Yes Yes No
Power shifts 12 months Yes Yes Yes No
Manual transmission 12 months Yes Yes Yes No
REMAN GEARBOXES
Wobble boxes 12 months Yes Yes Yes No
Rotor drives 12 months Yes Yes Yes No
REMAN ELECTRICAL
Alternators 12 months Yes Yes Yes No
Starters 12 months Yes Yes Yes No
Generators 12 months Yes Yes Yes No
All other electronics 12 months Yes Yes Yes No
REMAN HYDRAULICS
Pumps 12 months Yes Yes Yes No
Motors 12 months Yes Yes Yes No
Cylinders 12 months Yes Yes Yes No
MISCELLANEOUS
A/C compressors 12 months Yes Yes Yes No
CNH Industrial New Corporate logo
AW_CNHI_ Reman_CMYK.eps
AC
03 12 2013
CMYK0. 90. 100. 23
CMYK0. 0. 0. 100
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM
SHOP PRODUCTS
SHOP PRODUCTS
NEW HOLLAND-BRANDED TOOLS
80-PIECE FIELD SERVICE KITPART NO. SN99980Kit includes:
• 32, 3⁄8-inch drive sockets • 31, ½-inch drive sockets • Two screwdrivers • 15 combination wrenches• Lifetime replacement warranty
45-PIECE BIT SETPART NO. SN18001A• Made from high-grade
chrome vanadium steel• Nickel chrome finish
for durability• Lifetime replacement warranty
AIR IMPACT WRENCHPART NO. SN17050• Steel-nose case with lightweight
aluminum housing• Rotary-action air motors—ball-bearing
mounted for balance, speed and power• Pressure feed grease lubrication• Five-position air speed regulator• Convenient side bar forward/reverse• Variable speed trigger—8,000 rpm• 425 feet per pound max torque forward/reverse• One-year warranty from date of purchase on parts and labor
8-PIECE WRENCH SETPART NO. SN70001• 15-degree offset on box end
provides knuckle clearance• Nickel chrome finish for durability• Dual-pawl ratcheting box end
provides smooth operation and maximum strength
• Lifetime replacement warranty
21-PIECE SOCKET SETPART NO. SN40001• Highly-polished chrome for
appearance and durability• Made from high-grade
chrome vanadium steel• Hardened for ultimate
strength and durability• Lifetime replacement warranty
ROBUST OFFERINGS AT YOUR DEALERSHIP OR
PARTSTORE.AGRICULTURE.NEWHOLLAND.COM50
SHOP PRODUCTS
SHOP PRODUCTS
GR-9 MULTI-PURPOSE GREASE• Formulated for extreme pressure wheel-bearing and chassis applications • Formulated with a lithium complex thickener, rust and oxidation
inhibitors, and extreme-pressure additives to provide exceptional protection from wear and oxidation
GREASE
HI-TEMP EP GREASE• Formulated to withstand high-heat applications and still provide
outstanding wear-protection and load-carrying capabilities • Excellent choice for high-speed bearing applications
MOLY GREASE GR-75• Fortified with molybdenum disulfide (moly) to provide
exceptional wear protection for slow-speed, severe-wear, high-torque applications
• Perfect fit for areas like rockshafts, loader pins and bushings
SYNTHETIC GREASE GR-1000 SSL• An NLGI No. 2 high-performance grease—combines a synthetic
base fluid with a calcium-sulfonate complex thickener• Thickener system provides a high dropping point, while
heavy-duty additives provide optimum extreme-pressure properties and excellent resistance to water wash, oxidation and outstanding protection against rust and corrosion
• Excellent performance properties at both high and low temperatures
SOIL COMPACTION TESTERPART NO. 73340410
• 24-inch, stainless steel rod with adjustable shock collar to prevent damage to the gauge during transport or storage
• Easy-to-read, color-coded, stainless steel dial that is liquid-filled to reduce shock
• Durable molded housing with rubber-grip handles• Large and small tip included with convenient storage in tester housing• Hanger hole with nail included for easy storage on wall or
above workbench
SPECIFICATIONSPenetration depth Up to 24 inches in 3-inch increments
Two tips included – ½-inch tip for firm soil – ¾-inch tip for soft soil
Green testing range (0-200 psi) Good growing conditions
Yellow testing range (200-300 psi) Fair growing conditions
Red testing range (300 psi and above) Poor growing conditions
51
PART NUMBER INDEX
PART NUMBER INDEX 53
PART NO. PAGE NO.
3680 38
4497 8
4498 8
4499 29
4726 38
5785 29
5786 8
5787 27
6401 38
8503 29
9026 29
9686 29
21460 29
21461 29
21618 39
130384 27
1018883 38
1027915 38
1032199 38
1033379 38
47357837 38
47433844 38
47433845 38
47446028 39
47446031 39
47532734 34
47532784 34
47556260 34
73340370 40
73340374 42
73340375 26, 30
73340410 51
73340677 42
73340733 40
73340734 40
73340918 40
73341304 26
73341461 40
73341462 40
73341463 40
73341464 40
73341695 26, 30
73341805 15
73342628 9
PART NO. PAGE NO.
73342629 9
73342630 9
73342631 9
73342632 9
73342633 9
73342634 9
73342635 9
73342636 9
73342637 9
73342638 9
73342639 9
73342889 38
73342890 38
73342891 38
73342896 42
73358256 38
84180366 15
84193957 36
84193961 36
84327548 39
84346017 38
84380555 15
84380560 15
84389195 35
84389196 35
84389771 39
84389792 39
84389793 39
84398745 35
84398746 35
84416318 35
84416319 35
84472211 39
86990834 27
86992281 38
86992286 38
86993485 38
87298811 38
87298812 38
87298813 38
87298834 30
87298942 42
87299128 30
87299447 43
PART NO. PAGE NO.
87299448 43
87299450 43
87299451 43
87299953 30
87400930 26, 30
87400932 30
87400933 30
87400934 30
87400935 30
87400936 26, 30
87400937 26, 30
87400939 31
87400941 30
87401019 15
87413627 30
87413628 30
87415788 15
87443007 15
87443008 15
87443009 15
87443010 15
87460413 6
87460414 6
87488385 39
87500715 37
87500716 37
87506241 37
87506242 37
87506243 37
87506261 36
87506280 37
87506281 37
87506282 37
87506283 36
87506287 36
87506290 36
87506291 36
87506292 36
87506294 36
87506407 36
87506409 36
87515418 29
87546271 27
87584040 30
PART NO. PAGE NO.
87589793 8
87589822 29
87589836 27
87686090 37
1027915N 38
1032199N 38
1033379N 38
1131548R2 40
1131916R1 40
1132221N 40
122567C1 30
1277891C91 35
129195A2 30
130800A2 30
133480A1 35
133765A1 28
133766A1 28
133767A1 28
133768A1 28
133769A1 28
133770A1 28
1344516C1 30
1344911C3 35
140445A2 31
140450A2 30
141205C2 30
141464C92 35
1547095C2 6
1547096C2 6
1547097C2 6
1547098C2 6
1547099C2 6
1547100C2 6
1547101C2 6
1547102C2 6
1547103C2 6
1547104C2 6
1547105C1 28
1547106C1 28
1547107C1 28
1547108C1 28
1547109C1 28
1547110C1 28
1547180C1 9
PART NUMBER INDEX
PART NUMBER INDEX54
PART NO. PAGE NO.
1547181C1 9
1547182C1 9
1547183C1 9
193054A1 27
197511A1 29
1978963CX 38
1995505C1 27
1995506C1 27
241305A1 38
248517A1 28
248518A1 28
248519A1 28
248520A1 28
248523A1 28
248524A1 28
248525A1 28
248526A1 28
251419DS 32
251421DS 32
251422DS 32
251423DS 32
251424DS 32
251426DS 32
251427DS 32
251427HDS 32
251428DS 32
251429DS 32
251430DS 32
251431DS 32
251431HDS 32
251434DS 32
251435DS 33
251437DS 33
251439DS 33
251440DS 32
251441DS 32
251442DS 32
251443DS 32
251448DS 33
251449DS 33
251565DS 32
251566DS 32
251566HDS 32
251571DS 33
PART NO. PAGE NO.
251574DS 32
251578DS 33
251579DS 33
25332BA 27
25702BA 27
28341R1 30
28597R1 31
290719A1 38
294957A1 29
31399R1 30
321165A2 30
350447A1 38
372560A1 6
372561A1 6
372562A1 6
380434A1 7
380435A1 7
380436A1 7
400309A1 6, 7
407408R1 40
407486R1 40
410526A1 35
412786A1 38
416010A1 35
416015A1 35
416442A1 34, 35
416442A1 35
416443A1 34, 35
428354A1 34, 35
431542A1 30
435480A1 35
443623A1 15
443626A1 30
443627A1 30
443629A1 15
443630A1 15
443635A1 30
443637A1 30
443638A1 30
479005R2 8
479006R2 8
479007R2 8
479008R2 8
479009R2 8
PART NO. PAGE NO.
479010R2 8
479011R2 8
479012R2 8
547188R2 27
547596R1 40
594227R1 27
594545R1 27
594546R1 27
596623R1 27
601986R1 27
602594R1 27
602595R3 27
602595R3N 27
603020R92 35
6078BB 8
6079BC 8
6080BC 8
6081BC 8
6083BA 8
790-1002 31
811191C1 9
811799C3 27
811889C1 27
812362C1 31
812384C3 27
812385C3 27
991049R2 40
B500276 35
B505500 40
B505502 40
B93368 27
B93369 27
B93370 27
B95242 27
B95243 27
CDS209TTR 21
CDS211TTR 21
DC208TT1018, 19, 21, 22
DC208TT2 18
DC208TT516, 17, 18, 20, 21, 23,
24, 25
DC208TT8 17, 20
DC208TTR17 17, 21, 25
PART NO. PAGE NO.
DC210TT 20
DC210TT216, 19, 24, 25
DC210TTR4 16, 19
DC211TT2 18, 20
DC211TT316, 18, 19, 21, 22, 23
DC211TTR216, 17, 20, 21
DC211TTR21 22, 24
DC211TTR316, 17,
18, 21, 25
DC211TTR3E 22
DC211TTR4 16, 18, 19
DC214TTR2 16
DC214TTR3 16, 18, 19
DS208TT1217, 18, 19, 20, 21, 22, 23, 24, 25
DS208TT12A 17, 24
DS208TT13 17, 23, 24
DS208TT2A17, 19, 20, 22
DS208TT516, 17, 18, 19, 21, 22, 23, 24, 25
DS208TT616, 17,
18, 20, 22, 23, 25
DS208TT718, 21,
23, 24, 25
DS208TT8 16, 18, 24
DS208TTR5 23
DS208TTR6 23
DS208TTR816, 19, 21, 23, 24, 25
DS209TT217, 18,
19, 22, 23, 24, 25
DS209TT4 19, 21, 25
DS209TT6 18
DS209TT7 22
DS209TT8A 21
DS209TTR10 20
DS209TTR217, 19, 21, 23
DS209TTR419, 20,
21, 22, 24
DS209TTR5 18, 22, 24
DS209TTR6P 22
DS209TTR8 22, 23
PART NUMBER INDEX
PART NUMBER INDEX 55
PART NO. PAGE NO.
DS210TT217, 19,
20, 22, 24
DS210TT4 16
DS210TT5 21
DS210TTR2 16, 18, 19
DS210TTR4 21
DS210TTR5R 18
DS211TT3 17, 19, 22
DS211TT4 18
DS211TT616, 17,
18, 22, 24
DS211TTR1317, 19,
20, 23, 24
DS211TTR218, 20, 23, 25
DS211TTR23 22
DS211TTR316, 17,
18, 20, 22, 23, 24, 25
DS211TTR9 20
DS214TTR3 19
DS216TTR3 21
FD209RB19, 20, 21, 22, 23, 25
FD209RK 20, 22, 24
FD209RM 21, 24, 25
FD211RE 17, 20, 22
FD211RJA 20, 25
FD211RM17, 21, 23, 25
GD-161A 39
GP-102 38
GP-103 38
HPC100GP 21
P2024470 44
P2024472 44
P2024474 44
P2024481 44
P2024483 44
P2024490 44
P2024492 44
P2024494 44
P2024496 44
P2024498 44
P2024500 44
P2024502 44
P2024503 44
P2024504 44
PART NO. PAGE NO.
P2024506 44
SBP219537B 30
SBP220303B 30
SN17050 50
SN18001A 50
SN40001 50
SN70001 50
SN99980 50
SPC560216E 42
SPC560217E 42
SPC560218E 42
SPC560219E 42
SPC560220E 42
SPC560221 42
SPC560231E 42
SPC560232E 42
SPC560234E 42
SPC560236E 42
SPC560240E 42
SPC560242E 42
SPC560245E 42
SPC560247E 42
SPC560249E 42
SPC560251E 42
ST14253 33
ST14255 32
ST14256 33
ST14257 33
ST14258 32
ST462313DS 32
ST462314HXDS 32
ST463236R1 32
ST463237R1 32
ST463238R1 32
ST463253R1 32
ST463254R1 32
ST464582R1 32
ST464583R1 32
ST464591R1 32
ST475937HXDS 33
ST522325R12 33
ST59057C1 33
ST59058C1 33
ST660020HXDS 33
PART NO. PAGE NO.
ST660204DS 32
STHS151DS 32
STMF164RSDS 32
STP6522182 33
STP6526829 32
STP6526832 32
STP6526852 33
STRD16RDS 32
T54196 30
TP-351A 37
ZSN18358 34, 35
SAFETY NEVER HURTS !™ Always read the Operator’s Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs, and use any safety features provided.
PM-17048A Issued 05/2014 Replaces: PM-17048
©2014 CNH Industrial America LLC. All rights reserved.
New Holland is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Reman is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. www.newholland.com
Any trademarks referred to herein, in association with goods and/or services of companies, other than owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the property of those respective companies.