Timbron International Webcast/Onsite Auction Brochure

Embed Size (px)

Citation preview

  • 8/6/2019 Timbron International Webcast/Onsite Auction Brochure

    1/5

    Hilc Iil, LLCwebCast / onsIte auCtIonBy order of the Secured Creditors, Complete Plant Shutdown, Assets of

    A u c t i o n e e r s L i q u i d a t o r s A p p r a i s e r s

    Hilco Industrial, LLC

    www.hilcoind.com

    Atlanta Birmingham Birmingham (UK) Boston Charlotte Chicago Connecticut Dallas Detroit Grand Rapid

    Guadalajara (MX) Hong Kong (Greater China) Irapuato (MX) Leeds (UK) London (UK) Los Angeles Mexico City

    Monterrey (MX) New York San Francisco Singapore Thailand Toronto Villahermosa (MX)

    Prucr f dcrtv n-structurw atrtv Pruct

    Fturg: Ptc extrur, Ptzr supprt equpmt

    wednesday, august 24thbeginning at 10am Pt

    sc, Ca

  • 8/6/2019 Timbron International Webcast/Onsite Auction Brochure

    2/5

    t chl ci, pl cll Hilc Iil, LLC 1-877-37-HILCo (44

    dIreCtIonsFrom saCramento InternatIonaL aIrPort (52 mILes / 45 mIn.): trave

    aIrPort bLvd to LIndbergH dr, straIgHt to stay on aIrPort bLvd, sLIgH

    stay on aIrPort bLvd, take tHe ramP onto I-5 s, exIt 476 For marCH Ln,

    marCH Ln, rIgHt at venezIa bLvd, rIgHt on grand CanaL bLvd.

    FurtHer InFormatIon an 18% buyer's PremIum wILL be CHarged on aLL assets. tHe

    PremIum wILL be reduCed to 16% For Payments made by CasH,

    CHeCk or wIre transFer. auCtIon wILL be ConduCted In

    aCCePtIng u.s. CurrenCy onLy.

    Removal deadline is august 31st witH HouRs of Removal betwee

    4pm monday tHRougH fRiday. afteR tHe noted deadline at

    macHineRy & equipment will be deemed abandoned and no Refu

    be issued. no eXceptions.

    For FurtHer InFormatIon on maCHInery & equIPment, PLease

    JoHn magnuson at 847.504.3204 or emaIL [email protected]

    For Payments PLease ContaCt LesIa JosePH at 616.732.1800 x19

    [email protected] or HILCo aCCounts reCeIva

    [email protected]

    For Customer servICe, PLease ContaCt sandI neeLy at 248.254.99

    emaIL [email protected]

    tH

    rd

    PleASe ContACtn At 847.504.3204 or eMAil

    ReCyCling lines1 DAVIS STANDARD MODEL 60IN60TPIH 6 EXTRU

    V7562, (1999), 34/1 L/D RATIO, 700-HP Max. Capacity11.29:1 Gearbox Ratio, 45 Degree Ram Feed AssemBarrel, 7 Zone Closed Loop Water System For Barrel, 14Eurotherm 2208 Temp Controls, (A) Shredder SurgeAgitation Including Horizontal Auger Discharge To The E

    Beringer 8" Hydraulic Screen Changer, Model U81005, (1Hydraulic Power Unit, (C) Beringer Water Ring PelletWRP 35, S/N 35P/27 (1998)

    1 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUD1671, (1999), 34/1 L/D Ratio, 700-HP Max. Capacity GeaGearbox Ratio, 400-HP DC Main Drive Motor, EurothermController, 45 Degree Ram Feed Assembly, 7 Zone WaBarrel, Vented, 14 Zone Eurotherm 2208 Temp Con(Machine Not In Service Parts Removed), (A) Barron SuWith Motorized Agitator and Horizontal Auger Conveyor T(B) Beringer 8" Slide Plate Screen Changer, S/N U810(Hydraulic Power Unit Not Complete), (C) Beringer WPelletizer, Model WRP35, S/N 35P136, (Not Complete)

    by order of the secured Creditor,

    Complete Plnt shutdown, aet of

  • 8/6/2019 Timbron International Webcast/Onsite Auction Brochure

    3/5F ifi, pl ii h b .hilci.c

    ProFILe LInes

    PROFILE LINE 1 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUDER, S/N X1763,

    (1998), 24/1 L/D Ratio, 250-HP DC Main Drive Motor With RelianceFlexpak SCR Controller, 17.21 :1 Gearbox Ratio, 5 Zone Closed LoopWater System For Barrel Cooling, Computer Temp Controls, Equippedwith (A) Conair 2 Component Blending System With Controls, (B)Greiner Model ECO CAL 6P/11.5 DE Vacuum Calibration / Water CoolingTable, S/N E0006539 (2000), (C) Greiner Model CATPUL 30/9-235-9-DS Puller / Saw Combination, S/N R0006544, 10/8 KW Drive System,9" x 8' Long Cleated Rubber Belts With (2) Upacting Slide Table Saws

    PROFILE LINE 2 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUDER, S/N X1777,

    (1998), 24/1 L/D Ratio, 250-HP DC Main Drive Motor With RelianceFlexpak SCR Controller, 17.21 :1 Gearbox Ratio, 5 Zone Closed LoopWater System For Barrel Cooling, Computer Temp Controls, Equippedwith (A) Conair 2 Component Blending System With Controls, (B)Greiner Model ECO CAL 6P/11.5 DE Vacuum Calibration / Water CoolingTable, S/N E0006536 (2000), (C) Greiner Model CATPUL 30/9-235-9-

    DS Puller / Saw Combination, S/N R0006542, 10/8 KW Drive System,9" x 8' Long Cleated Rubber Belts With (2) Upacting Slide Table Saws

    PROFILE LINE 3 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUDER, S/N X1791,

    (1998), 24/1 L/D Ratio, 250-HP DC Main Drive Motor With RelianceFlexpak SCR Controller, 17.21 :1 Gearbox Ratio, 5 Zone Closed LoopWater System For Barrel Cooling, Computer Temp Controls, Equippedwith (A) Conair 2 Component Blending System With Controls, (B)Greiner Model ECO CAL 6P/11.5 DE Vacuum Calibration / Water CoolingTable, S/N E0006534 (2000), (C) Greiner Model CATPUL 30/9-235-9-DS Puller / Saw Combination, S/N R0006545, 10/8 KW Drive System,9" x 8' Long Cleated Rubber Belts With (2) Upacting Slide Table Saws

    PROFILE LINE 41 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUDER,

    (1998), 24/1 L/D Ratio, 250-HP DC Main Drive Motor WitFlexpak SCR Controller, 17.21 :1 Gearbox Ratio, 5 Zone CWater System For Barrel Cooling, Computer Temp Controlswith (A) Conair 2 Component Blending System With Controls,Model ECO CAL 6P/11.5 DE Vacuum Calibration / Water CoS/N E9910217 (2000), (C) Greiner Model CATPUL 30/9-235-9Saw Combination, S/N R9910216, 10/8 KW Drive System, 9Cleated Rubber Belts With (2) Upacting Slide Table Saws

    PROFILE LINE 51 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUDER,

    (1998), 24/1 L/D Ratio, 250-HP DC Main Drive Motor WitFlexpak SCR Controller, 17.21 :1 Gearbox Ratio, 5 Zone CWater System For Barrel Cooling, Computer Temp Controlswith (A) Conair 2 Component Blending System With Controls,Model ECO CAL 6P/11.5 DE Vacuum Calibration / Water CoS/N E0002368, (2000), (C) Greiner Model CATPUL 30/9-235-9

    Saw Combination, S/N R9912267, 10/8 KW Drive System, 9Cleated Rubber Belts With (2) Upacting Slide Table Saws

    PROFILE LINE 61 DAVIS STANDARD MODEL 60IN60TPIH 6" EXTRUDER,

    (1998), 24/1 L/D Ratio, 250-HP DC Main Drive Motor WitFlexpak SCR Controller, 17.21 :1 Gearbox Ratio, 5 Zone CWater System For Barrel Cooling, Computer Temp Controlswith (A) Conair 2 Component Blending System With Controls,Model ECO CAL 6P/11.5 DE Vacuum Calibration / Water CoS/N N/A (2000), (C) Greiner Model CATPUL 30/9-235-9-DS PCombination, S/N R0002365, 10/8 KW Drive System, 9"Cleated Rubber Belts With (2) Upacting Slide Table Saws

    (6) PRoFile lines

  • 8/6/2019 Timbron International Webcast/Onsite Auction Brochure

    4/5

    ComPoundIng LInes sHredder granuLators PLant suPPo

    t chl ci, pl cll Hilc Iil, LLC 1-877-37-HILCo (44

    Plant suPPoRt equiPment1 CONAIR MODEL 34WOCD50 CHI

    TE-F-45772, With Water Tank and Pu

    1 TRANE MODEL RTWAO704XCHILLER, S/N U99F09178, With Pumps

    2 CONAIR REyMSA COOLING TOWE

    1 QUINCy MODEL QSB50ACA3COMPRESSOR, 50-HP, S/N 97616

    1 QUINCy MODEL QSB50ACACOMPRESSOR, 50-HP, S/N 94326H

    1 AIR DRyER / VACUUM TANK

    6 CONAIR PNEUMATIC PUMP STATDust Collector

    9 CONAIR HOPPERS3 10-HP VACUUM PUMPS FOR EXTR

    9 CONAIR 15-HP PNEUMATIC PUMP

    1 CONAIR GRINDER, 14" x 18", S/N(1998)

    5 A.O. SMITH SILOS, 12' x 41' H, S81847, 81846, 81845, 81844 (1998)Ft. Capacity

    1 TINIUS OLSEN MODEL MP 993 EPLASTOMETER

    ComPounding lines DAVIS STANDARD MODEL 60IN60, 6" EXTRUDER, S/N 01680, 34/1 L/D Ratio, 400-HP

    DC Main Drive Motor, Eurotherm 590 SCR Controller, 17.21:1 Gearbox Ratio, Vented andPlugged Barrel, 7 Zone Closed Loop Water System, 14 Zone Eurotherm 2208 Temp ControlPanel, (A) Conair 4 Component Blending System With Controls, (B) Beringer Model WRP35, 8" Hydraulic Slide Plate Screen Changer, S/N 8UL158 (1998), 2-HP Hydraulic PowerUnit, (C) Beringer Water Ring Pelletizer, Model WRP 35, S/N 35P137 (1999)

    DAVIS STANDARD MODEL 60IN60TPIH, 6" EXTRUDER, S/N X0704, 34/1 L/D Ratio,400-HP DC Main Drive Motor, Eurotherm 590 SCR Controller, 17.21:1 Gearbox Ratio,Vented and Plugged Barrel, (Water Cooling System Not Complete), 14 Zone Eurotherm

    2208 Temp Control Panel, (Not Complete), (A) Beringer Model WRP 35, Hydraulic ScreenChanger, S/N 8UL156, (1998), 5-HP Hydraulic Power Unit, (B) Beringer Water RingPelletizer, Model WRP 35, S/N 35P215 (1998), (Not Complete)

    shReddeR UNI-SHRED SINGLE ROTOR SHREDDER 36" Wide Approx. 50-HP Main Drive Motor,

    Ram Feed Assembly, 5-HP Blower Discharge (A) TITAN 36" x 16' Incline Rubber BeltFeed Conveyor, (B) 4' x 6' Hydraulic Lift Table

    gRanulatoRs2 COMAV S.R.L. TyPE EP BALE BREAKER TyPE GRANULATORS, S/N 1463.99

    (1999), 17.97 KW Main Drive Motor, Includes Densifying Baler Discharge

  • 8/6/2019 Timbron International Webcast/Onsite Auction Brochure

    5/5

    Headquarters

    31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995

    www.hilcoind.com

    Forwarding Service Requested

    PresorteFirst Class U.S. Posta

    PAIDDetroit, M

    Permit No.

    Hilco Industrial, LLCA u c t i o n e e r s L i q u i d a t o r s A p p r a i s e r s

    HILCo Iil, LLC i ivii f Hilc ti, LLC Hq 5 rv div, s. 206 nhk, IL 60062 all ih vPi i usa tImbron IL Lic #444.000215 Pl vii i .hilci.c vi cpl cii.

    Atlanta Birmingham Birmingham (UK) Boston Charlotte Chicago Connecticut Dallas Detroit Grand Rapids Guadalajara (MX) Hong Kong (Greater

    Irapuato (MX) Leeds (UK) London (UK) Los Angeles Mexico City (MX) Monterrey (MX) New York San Francisco Singapore Thailand Toronto Villaher

    tr sAn 18% buyer's premium will be charged on buyers premium will be reduced to 16% made by cash, company check or wire transwill be sold to the highest bidder for cash, with the Auctioneers customary Terms of Swhich will be posted on the premises of subject to additional terms announced the d

    items will be sold as is, where-is without aexpressed or implied. Although obtained deemed reliable, the Auctioneer makes nguarantee to the accuracy of the informatiotained. Bidders are encouraged to thoroughitems on which they intend to bid prior to sano items will be removed until the day after of the sale and payment is made in full. Sutions, deletions and prior sale.

    p: ALL PURCHASES MUST BE PAITHE DAY OF THE AUCTION. If you intend ttransfer, we will accept payment the day ONLY IF a deposit of 25% of total purchasthe day of the sale. Contact our office foinstructions. Only cash, wire transfer or cepayable to Hilco Industrial, LLC will be accepchecks payable to Hilco Industrial, LLC wilonly if accompanied by a bank letter of gsample letter below). All sales are subjectPurchasers claiming exemptions from taxesproof satisfactory to the Auctioneer of their claim such exemptions.

    s bk lr(Bank Name) unconditionally guaranteeHilco Industrial, LLC from (Company guarantee will be valid for purchases Auction of Timbron International on Aug

    HILCo webCast / onsIte auCtIo

    FollowUs on:

    By order of the Secured Creditors, Complete Plant Shutdown, Assets of

    Prcr f dcrv n-srcrw arv PrcFr: Pc exrr, Pzr sppr ep

    wednesday, august 24th at 10am Pt

    stoCkton, Ca