Tips how to pass Computer Hardware Servicing National Certificate IIThis is the preparation for this coming NCII schedules on January and February.

Do I need to pass TESDA's Computer Hardware Servicing NC II Certification Exam?

Passing TESDAs Computer Hardware Servicing NC II Assessment Examination is really not necessary. But if you are aspiring to work abroad, consider your computer hardware servicing certification as your main portfolio. Countries abroad are strict regarding the quality of workers they hire and the only way for them to be able to screen the employees effectively is to ask for a certification. Most foreign employers really prefer potential employees to be at least NC II passers.

As for computer hardware servicing technicians, it is a MUST. If you are a self professed computer technician and wanting to have your own computer shop, you can not register your shop if you or your worker is not a TESDA Computer Hardware Servicing NC II certified. And if you want to get employed abroad, remember that foreign employers prefer CompTIA+ passer or equivalent like TESDA Computer Hardware Servicing NC II Certification. Since Computer Hardware Servicing NC II examination is readily available, take the exam today and be a computer hardware servicing nc ii certified technician!

Those aspiring trainees and students who want to pass the NC-II (National Certificate - Level II) of Technical Education and Skills Development Authority (TESDA), here are some few tips how to pass the Computer Hardware Servicing NC-II exam. Sirlon one of the passer in Computer Hardware Servicing NC-II, for me it was very easy to pass the examination for NC-II. The exam has three assessment methods or parts: Written Report (30 Minutes) Observation/Demo (4 hours) and the last is Oral/Interview (at least 1 hour).

First Tip: You must familiar yourself about all kinds of spare parts of computer

Second Tips: You need also know how to install an operating system such as windows 2000 and windows XP.

Third Tips: You must know how to install dual boot operating system.

Fourth Tips: You should know how to create a straight trough cable and crossover cable.

Fifth Tips: Connect the straight through cable from your PC to a server. After connecting you must have also familiar in putting up IP addresses. You must connect to the server and view the shared folder and its file. Once youve done that print a document that comes from the server.

Sixth Tips: Connect to other computer using crossover, view each other shared folder and file.

Here is a list of how things were laid for in the examination.

Written by Sirlon

For TEST I : Occupational Health and Safety Precautions - Observe this all throughout the examination

Give at least 6 occupational health and safety tips (Enumerate)

Minimum of 6

Maximum of 10

For TEST II: System Unit Assembly and Disassembly

Inventory (Enumarate)

a. Materials After you disassemble the computer, identify each parts in front of the assessor and list down all the parts of PC in your test paper and reassemble again then boot up the computer.

b. Tools Crimping Tools, UTP Cable, RJ45, Flat screw & Philip screw, etch.

c. Work Area Computer Laboratory

d. Equipment 1 set of computer for PC disassembly and assembly and 1 set of computer for installation of Windows 2000 and XP.

For TEST III: Operating System Installation

For TEST IV: Cabling

a. S.T. Create straight thru cable then test the cable using network tester or PC

b. C.O. Create crossover cable then test the cable using network tester or PC

For TEST V: Networking

a. File and Printing sharing Create a shared folder on a desktop, open notepad type some information and save it on a shared folder then access it into the other PC, connect the printer and printer the document.

For TEST VI: Theoretical Questions both written and oral

You will be asked about identification and functions of the system unit peripherals and components, troubleshooting techniques and approaches.

The End: GOOD LUCK GUYS!!!!

===========================

I just want to make clear that the list provided for is not definite as what will come out in the computer hardware servicing nc ii exam. But sure it does give you a little hunch how the examination will be.

During the examination, you are required to observe troubleshooting safety. Have your own tools and installers (best if you have utilities and driver packs alongside). Use proper troubleshooting attire. Befriend your assessor - he/she wants to help you pass if your deserving enough.

Last Updated (Wednesday, 05 November 2014 07:12)