Upload
vanminh
View
258
Download
3
Embed Size (px)
Citation preview
TISI Library Accession List (Oct-Dec 2010) Page 1
TISI Library Accession List (October-December 2010)
ACCEPTANCE SPECIFICATION ISO
ISO 10360-2 2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - P. CMMs used for measuring linear dimensions /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
ACOUSTICS ISO ISO 11201 2010 Acoustics - Noise emitted by machinery and equipment - Determination of
emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 11202 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 11204 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
AGRICULTURAL PRODUCTS ISO
ISO 6571 2008 Spices, condiments and herbs - Determination of volatile oil content
(hydrodistillation method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 2
AIR ISO
ISO 16000-23 2009 Indoor air - P. 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 16000-24 2009 Indoor air - P. 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
AIR-CONDITIONING EQUIPMENT ISO
ISO 5151 2010 Non-ducted air conditioners and heat pumps - Testing and rating for performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
AIR FILTERS - CLASSIFICATION SYSTEMS BSI
BS EN 1822-1 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 1: Classification, performance testing, marking /By British Standards Institution (BSI). London: BSI, 2009.
AIR FILTERS - PERFORMANCE TESTING BSI
BS EN 1822-1 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 1: Classification, performance testing, marking /By British Standards Institution (BSI). London: BSI, 2009.
AIR FILTERS - TESTING CONDITIONS BSI
BS EN 1822-2 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 2: Aerosol production, measuring equipment, particle counting statistics /By British Standards Institution (BSI). London: BSI, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 3
BS EN 1822-3 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 3: Testing flat sheet filter media /By British Standards Institution (BSI). London: BSI, 2009.
ANCHORS BSI BS 7883 2005 Code of practice for the design, selection, installation, use and maintenance of
anchor devices conforming to BS EN 795 /By British Standards Institution (BSI). London: BSI, 2007.
ANIMAL FEED ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the
application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the
preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
BAR CODES ISO ISO/IEC 15417 2007 Information technology - Automatic identification and data capture
techniques - Code 128 bar code symbology specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
ISO/IEC 16390 2007 Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification /By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
BIOLOGICAL ANALYSIS AND TESTING ISO ISO 10993-10 2010 Biological evaluation of medical devices - P. 10: Tests for irritation and skin
sensitization /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 4
BOARD (PAPER) ISO ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor -
P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 2470-2 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 2: Outdoor daylight conditions (D65 brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ISO 5631-1 2009 Paper and board - Determination of colour by diffuse reflectance - P. 1: Indoor daylight conditions (C/2 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 5631-2 2008 Paper and board - Determination of colour by diffuse reflectance - P. 2:
Outdoor daylight conditions (D65/10 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ISO 11476 2010 Paper and board - Determination of CIE whiteness, C/2º (indoor illumination conditions) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
BREAKING LOAD ISO
ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
CEMENTS BSI
BS EN 634-2 2007 Cement-bonded particleboards - Specifications - P. 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions /By British Standards Institution (BSI). London; BSI, 2007.
TISI Library Accession List (Oct-Dec 2010) Page 5
CEREAL PRODUCTS ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the
application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
ISO 24333 2009 Cereals and cereal products - Sampling /By International Organization for
Standardization (ISO). Geneva: ISO, 2009.
CEREALS ISO ISO 12099 2010 Animal feeding stuffs, cereals and milled cereal products - Guidelines for the
application of near infrared spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
ISO 24333 2009 Cereals and cereal products - Sampling /By International Organization for
Standardization (ISO). Geneva: ISO, 2009.
CETANE NUMBER
ISO ISO 4264 2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by
the four-variable equation /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2007.
CHEMICAL ANALYSIS AND TESTING AOAC International
630.243 A363O Official methods of analysis of AOAC International /By William Horwitz editor, AOAC International and George W. Latimer editor. 18th ed. Gaithersburg: AOAC International, 2010.
ISO
ISO 9026 2007 Raw rubber or unvulcanized compounds - Determination of green strength /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
TISI Library Accession List (Oct-Dec 2010) Page 6
CHEMISTRY - ANALYSIS
AOAC International
630.243 A363O Official methods of analysis of AOAC International /By William Horwitz editor, AOAC International and George W. Latimer editor. 18th ed. Gaithersburg: AOAC International, 2010.
COATED FABRICS ISO
ISO 6179 2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.
COLOUR ISO
ISO 5631-1 2009 Paper and board - Determination of colour by diffuse reflectance - P. 1: Indoor daylight conditions (C/2 ) /By International Organization for Standardization (ISO). Geneva: ISO,
2009.
ISO 5631-2 2008 Paper and board - Determination of colour by diffuse reflectance - P. 2: Outdoor daylight conditions (D65/10 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
COMPRESSED-AIR SYSTEMS ISO
ISO 7183 2007 Compressed-air dryers - Specifications and testing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
COOLING SYSTEMS ISO
ISO 4081 2010 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 7
ISO 5151 2010 Non-ducted air conditioners and heat pumps - Testing and rating for performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
CREEP TESTING ISO
ISO 8013 2006 Rubber, vulcanized - Determination of creep in compression or shear /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
DANGEROUS MATERIALS ISO
ISO 23667 2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
DATA LAYOUT ISO
ISO/IEC 19794-7 2007 Information technology - Biometric data interchange formats - P. 7: Signature/sign time series data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
ISO/IEC 19794-9 2007 Information technology - Biometric data interchange formats - P. 9: Vascular image data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
ISO/IEC 19794-10 2007 Information technology - Biometric data interchange formats - P. 10: Hand geometry silhouette data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
DATA PROCESSING ISO
ISO/IEC TR 15504-7 2008 Information technology - Process assessment - P. 7: Assessment of
organizational maturity /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 8
DENTAL PROSTHESIS ISO
ISO 20795-2 2010 Dentistry - Base polymers - P. 2: Orthodontic base polymers /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
DENTISTRY ISO
ISO 9917-2 2010 Dentistry - Water-based cements - P. 2: Resin-modified cements /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 10451 2010 Dentistry - Contents of technical file for dental implant systems /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 20795-2 2010 Dentistry - Base polymers - P. 2: Orthodontic base polymers /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
ISO 28158 2010 Dentistry - Integrated dental floss and handles /By International Organization
for Standardization (ISO). Geneva: ISO, 2010.
DESIGN ISO ISO 9809-1 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction
and testing - P. 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 9809-2 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 9809-3 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction
and testing - P. 3: Normalized steel cylinders /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2010.
TISI Library Accession List (Oct-Dec 2010) Page 9
DIESEL FUELS ISO
ISO 12156-1 2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - P. 1: Test method /By International Organization for Standardization (ISO). 2nd ed. Geneva:
ISO, 2006.
DIMENSIONAL TOLERANCES ISO
ISO 8062-3 2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - P. 3: General dimensional and geometrical tolerances and machining allowances for castings /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
DISHWASHING MACHINES ISO
ISO 6804 2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and
dishwashers - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
ELECTRIC CABLES BSI
BS 7846 2009 Electric cables - Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V, having low emission of smoke and corrosive gases when affected by fire - Specification /By British Standards Institution (BSI). 3rd ed. London: BSI, 2009.
BS 8434-2 2003 Methods of test for assessment of the fire integrity of electric cables - P. 2:
Test for unprotected small cables for use in emergency circuits - BS EN 50200 with a 930 C flame and with water spray /By British Standards Institution (BSI). London: BSI, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 10
ELONGATION ISO
ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester /By International Organization for
Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
EQUIPMENT SAFETY ISO
ISO 13857 2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ESSENTIAL OILS ISO
ISO 3053 2004 Oil of grapefruit (Citrus x paradisi Macfad), obtained by expression /By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.
FILTRATION ISO ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1: Determination
by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
FIRE HOSES ISO ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1:
Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 11
ISO 4642-2 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
FIRE RESISTANCE BSI BS 7846 2009 Electric cables - Thermosetting insulated, armoured, fire-resistant cables of
rated voltage 600/1 000 V, having low emission of smoke and corrosive gases when affected by fire - Specification /By British Standards Institution (BSI). 3rd ed. London: BSI, 2009.
BS 8434-2 2003 Methods of test for assessment of the fire integrity of electric cables - P. 2: Test for unprotected small cables for use in emergency circuits - BS EN 50200 with a 930 C flame and with water spray /By British Standards Institution (BSI). London: BSI, 2009.
FIREFIGHTING EQUIPMENT ISO
ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1: Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO,
2009.
ISO 4642-2 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
FLEXIBLE PIPES ISO
ISO 1436 2009 Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification /By International Organization for Standardization (ISO).
4th ed. Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 12
ISO 3862 2009 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification /By International Organization for
Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
ISO 4081 2010 Rubber hoses and tubing for cooling systems for internal-combustion engines -
Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.
ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1:
Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO,
2009.
ISO 4642-2 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles /By International Organization for
Standardization (ISO). Geneva: ISO, 2009.
ISO 5771 2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia -
Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.
ISO 6804 2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva:
ISO, 2009.
ISO 8789 2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor
vehicles - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
FLOW MEASUREMENT ISO
ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.
FOOD ANALYSIS AOAC International
630.243 A363O Official methods of analysis of AOAC International /By William Horwitz editor, AOAC International and George W. Latimer editor. 18th ed. Gaithersburg: AOAC International, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 13
FOOD CONTROL ISO
ISO 22006 2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
FOOD PRODUCTS ISO
ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
FOOD TECHNOLOGY ISO
ISO 22006 2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
FUEL OIL ISO ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1:
Determination by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva:
ISO, 2009.
ISO 10307-2 2009 Petroleum products - Total sediment in residual fuel oils - P. 2: Determination using standard procedures for ageing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
FUELS ISO
ISO 8216-1 2010 Petroleum products - Fuels (class F) classification - P. 1: Categories of marine fuels /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 14
ISO 8217 2010 Petroleum products - Fuels (class F) - Specifications of marine fuels /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.
FURNITURE BSI
BS EN 12520 2010 Furniture - Strength, durability and safety - Requirements for domestic seating /By British Standards Institution (BSI). London: BSI, 2010.
GAS CYLINDERS ISO
ISO 9809-1 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 9809-2 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to
1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 9809-3 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction
and testing - P. 3: Normalized steel cylinders /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2010.
GAS PERMEABILITY
ISO
ISO 2782 2006 Rubber, vulcanized or thermoplastec - Determination of permeability to gases /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.
GLASS BSI BS 2975-2 2008 Sampling and analysis of glass-making sands - P. 2: Methods for chemical
analysis /By British Standards Institution (BSI). London: BSI, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 15
GYPSUM PLASTER BSI
BS EN 520 2004 Gypsum plasterboards - Definitions, requirements and test methods /By British Standards Institution (BSI). London: BSI, 2010.
HARDNESS MEASUREMENT ISO
ISO 48 2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.
HEAT PUMPS ISO
ISO 5151 2010 Non-ducted air conditioners and heat pumps - Testing and rating for performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
IDENTIFICATION METHODS ISO
ISO 2076 2010 Textiles - Man-made fibres - Generic names /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.
ISO/IEC 18000-1 2008 Information technology - Radio frequency identification for item management - P. 1: Reference architecture and definition of parameters to be standardized /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-2 2009 Information technology - Radio frequency identification for item
management - P. 2: Parameters for air interface communications below 135 kHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 16
ISO/IEC 18000-3 2008 Information technology - Radio frequency identification for item management - P. 3: Parameters for air interface communications at 13,56 MHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-4 2008 Information technology - Radio frequency identification for item
management - P. 4: Parameters for air interface communications at 2,45 GHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-7 2009 Information technology - Radio frequency identification for item management - P. 7: Parameters for active air interface communications at 433 MHz /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
IDENTITY CARDS ISO
ISO/IEC 10373-7 2008 Identification cards - Test methods - P. 7: Vicinity cards /By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 7816-2 2007 Identification cards - Integrated circuit cards - P. 2: Cards with contacts
- Dimensions and location of the contacts /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
IMPLANTS (SURGICAL) ISO ISO 13958 2009 Concentrates for haemodialysis and related therapies /By International
Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009. ISO 13959 2009 Water for haemodialysis and related therapies /By International Organization
for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
INFORMATION EXCHANGE ISO
ISO 7372 2005 Trade data interchange - Trade data elements directory /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005.
TISI Library Accession List (Oct-Dec 2010) Page 17
ISO/IEC TR 15504-7 2008 Information technology - Process assessment - P. 7: Assessment of organizational maturity /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
INFORMATION TECHNOLOGY ISO
ISO/IEC 15417 2007 Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
ISO/IEC 18000-1 2008 Information technology - Radio frequency identification for item management - P. 1: Reference architecture and definition of parameters to be standardized /By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008. ISO/IEC 18000-2 2009 Information technology - Radio frequency identification for item
management - P. 2: Parameters for air interface communications below 135 kHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
ISO/IEC 18000-3 2008 Information technology - Radio frequency identification for item
management - P. 3: Parameters for air interface communications at 13,56 MHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-4 2008 Information technology - Radio frequency identification for item management - P. 4: Parameters for air interface communications at 2,45 GHz /By International
Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008. ISO/IEC 18000-7 2009 Information technology - Radio frequency identification for item
management - P. 7: Parameters for active air interface communications at 433 MHz /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
ISO/IEC 19794-1 2006 Information technology - Biometric data interchange formats - P. 1:
Framework /By International Organization for Standardization (ISO). Geneva: ISO, 2006. ISO/IEC 19794-10 2007 Information technology - Biometric data interchange formats - P. 10:
Hand geometry silhouette data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
ISO/IEC 19794-7 2007 Information technology - Biometric data interchange formats - P. 7: Signature/sign time series data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
TISI Library Accession List (Oct-Dec 2010) Page 18
ISO/IEC 19794-8 2006 Information technology - Biometric data interchange formats - P. 8: Finger pattern skeletal data /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
ISO/IEC 19794-9 2007 Information technology - Biometric data interchange formats - P. 9: Vascular image data /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
ISO/IEC TR 15504-7 2008 Information technology - Process assessment - P. 7: Assessment of organizational maturity /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ISO/IEC TR 20000-3 2009 Information technology - Service management - P. 3: Guidance
on scope definition and applicability of ISO/IEC 20000-1 /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
INTERNAL COMBUSTION ENGINES ISO
ISO 4081 2010 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.
LABELS BSI
BS EN 980 2008 Symbols for use in the labelling of medical devices /By British Standards
Institution (BSI). London: BSI, 2008.
LABORATORY EQUIPMENT ISO
ISO 648 2008 Laboratory glassware - Single-volume pipettes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
LABORATORY GLASSWARE ISO
ISO 648 2008 Laboratory glassware - Single-volume pipettes /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 19
LATICES ISO
ISO 2004 2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.
LIQUEFIED PETROLEUM GAS ISO ISO 8789 2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor
vehicles - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
LIQUID AMMONIA ISO ISO 5771 2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia -
Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.
LIQUID FUELS ISO ISO 4264 2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by
the four-variable equation /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2007.
MAN-MADE FIBRES ISO ISO 2076 2010 Textiles - Man-made fibres - Generic names /By International Organization for
Standardization (ISO). 5th ed. Geneva: ISO, 2010.
MANAGEMENT TECHNIQUES ISO ISO/IEC TR 20000-3 2009 Information technology - Service management - P. 3: Guidance on
scope definition and applicability of ISO/IEC 20000-1 /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 20
MEASURING INSTRUMENTS
ISO
ISO 10360-2 2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - P. CMMs used for measuring linear dimensions /By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
MEAT
ISO
ISO 13720 2010 Meat and meat products - Enumeration of presumptive pseudomonas spp. /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
MEAT PRODUCTS
ISO
ISO 13720 2010 Meat and meat products - Enumeration of presumptive pseudomonas spp. /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
MECHANICAL SHOCK
ISO ISO 8568 2007 Mechanical shock - Testing machines - Characteristics and performance /By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
MEDICAL EQUIPMENT
BSI BS EN 980 2008 Symbols for use in the labelling of medical devices /By British Standards
Institution (BSI). London: BSI, 2008.
ISO ISO 10993-10 2010 Biological evaluation of medical devices - P. 10: Tests for irritation and skin
sensitization /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 21
MICROBIOLOGICAL ANALYSIS
ISO
ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the
preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
MILK
ISO ISO 10932 2010 Milk and milk products - Determination of the minimal inhibitory concentration
(MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) /By
International Organization for Standardization (ISO). Geneva: ISO, 2010. ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples,
initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
MILK PRODUCTS
ISO ISO 10932 2010 Milk and milk products - Determination of the minimal inhibitory concentration
(MIC) of antibiotics applicable to bifidobacteria and non-enterococcal lactic acid bacteria (LAB) /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
ISO 29981 2010 Milk products - Enumeration of presumptive bifidobacteria - Colony count technique at 37 C /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
ISO 6887-5 2010 Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - P. 5: Specific rules for the preparation of milk and milk products /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 22
MOTOR VEHICLES
ISO
ISO 8789 2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,
2009.
NANOTECHNOLOGIES
ISO
ISO/TS 27687 2008 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
NATURAL RUBBER ISO
ISO 1658 2009 Natural rubber (NR) - Evaluation procedure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
ISO 2004 2010 Natural rubber latex concentrate - Centrifuged or creamed, ammonia-preserved types - Specifications /By International Organization for Standardization (ISO). 5th ed.
Geneva: ISO, 2010.
ISO 2930 2009 Rubber, raw natural - Determination of plasticity retention index (PRI) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2009.
OPEN CHANNEL FLOW
ISO
ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 23
PACKAGING ISO ISO 23667 2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and
plastics composite IBCs - Compatibility testing /By International Organization for Standardization (ISO). Geneva: ISO, 2007.
PAINTS ISO ISO 8501-4 2006 Preparation of steel substrates before application of paints and related
products - Visual assessment of surface cleanliness - P. 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting /By International Organization for
Standardization (ISO). Geneva: ISO, 2006.
PAPER ISO ISO 11476 2010 Paper and board - Determination of CIE whiteness, C/2º (indoor
illumination conditions) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 2470-2 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor -
P. 2: Outdoor daylight conditions (D65 brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ISO 5631-1 2009 Paper and board - Determination of colour by diffuse reflectance - P. 1: Indoor daylight conditions (C/2 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 5631-2 2008 Paper and board - Determination of colour by diffuse reflectance - P. 2: Outdoor daylight conditions (D65/10 ) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 24
PAPER PULPS ISO
ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 2470-2 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 2: Outdoor daylight conditions (D65 brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
PARTICLE BOARDS BSI
BS EN 634-2 2007 Cement-bonded particleboards - Specifications - P. 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions /By British Standards Institution (BSI). London; BSI, 2007.
PERFORMANCE TESTING BSI
BS EN 1822-1 2009 High efficiency air filters (EPA, HEPA and ULPA) - P. 1: Classification, performance testing, marking /By British Standards Institution (BSI). London: BSI, 2009.
PETROLEUM PRODUCTS ISO ISO 4264 2007 Petroleum products - Calculation of cetane index of middle-distillate fuels by
the four-variable equation /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2007.
ISO 8216-1 2010 Petroleum products - Fuels (class F) classification - P. 1: Categories of marine
fuels /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010. ISO 8217 2010 Petroleum products - Fuels (class F) - Specifications of marine fuels /By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 25
ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1: Determination by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
ISO 10307-2 2009 Petroleum products - Total sediment in residual fuel oils - P. 2: Determination using standard procedures for ageing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
ISO 12156-1 2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating
rig (HFRR) - P. 1: Test method /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
ISO 13739 2010 Petroleum products - Procedures for transfer of bunkers to vessels /By International Organization for Standardization (ISO). Geneva: ISO, 2010.
PHYSICAL TESTING BSI BS EN 539-2 2006 Clay roofing tiles for discontinuous laying - Determination of physical
characteristics - P. 2: Test for frost resistance /By British Standards Institution (BSI). London: BSI, 2008.
PIPE COATINGS BSI
BS EN 10300 2005 Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating /By British Standards Institution (BSI). London: BSI, 2005.
PIPETTES ISO ISO 648 2008 Laboratory glassware - Single-volume pipettes /By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
PLASTERBOARD BSI BS EN 520 2004 Gypsum plasterboards - Definitions, requirements and test methods /By
British Standards Institution (BSI). London: BSI, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 26
PLASTICITY TESTING ISO
ISO 2930 2009 Rubber, raw natural - Determination of plasticity retention index (PRI) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2009.
PNEUMATIC EQUIPMENT ISO
ISO 7183 2007 Compressed-air dryers - Specifications and testing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
PROTECTIVE EQUIPMENT BSI
BS EN 137 2006 Respiratory protective devices - Self-contained open-circuit compressed air
breathing apparatus with full face mask - Requirements, testing, marking /By British Standards Institution (BSI). London: BSI, 2006.
QUALITY ASSURANCE SYSTEMS ISO
ISO 22006 2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
RADIOFREQUENCIES ISO
ISO/IEC 18000-1 2008 Information technology - Radio frequency identification for item management - P. 1: Reference architecture and definition of parameters to be standardized /By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-2 2009 Information technology - Radio frequency identification for item management - P. 2: Parameters for air interface communications below 135 kHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 27
ISO/IEC 18000-3 2008 Information technology - Radio frequency identification for item management - P. 3: Parameters for air interface communications at 13,56 MHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-4 2008 Information technology - Radio frequency identification for item
management - P. 4: Parameters for air interface communications at 2,45 GHz /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
ISO/IEC 18000-7 2009 Information technology - Radio frequency identification for item management - P. 7: Parameters for active air interface communications at 433 MHz /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
REFLECTANCE FACTOR ISO ISO 2470-1 2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor -
P. 1: Indoor daylight conditions (ISO brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 2470-2 2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - P. 2: Outdoor daylight conditions (D65 brightness) /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
REFRIGERATORS BSI BS EN 153 2006 Methods of measuring the energy consumption of electric mains operated
household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics /By British Standards Institution (BSI). London: BSI, 2006.
RESPIRATORY SYSTEM BSI BS EN 137 2006 Respiratory protective devices - Self-contained open-circuit compressed air
breathing apparatus with full face mask - Requirements, testing, marking /By British Standards Institution (BSI). London: BSI, 2006.
TISI Library Accession List (Oct-Dec 2010) Page 28
ROAD VEHICLES ISO ISO 8092-2 2005 Road vehicles - Connections for on-board electrical wiring harnesses - P. 2:
Definitions, test methods and general performance requirements /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.
ISO 9158 1988 Road vehicles - Nozzle spouts for unleaded gasoline /By International
Organization for Standardization (ISO). Geneva: ISO, 1988.
ROBOTS
ISO
ISO 10218-1 2006 Robots for industrial environments - Safety requirements - P. 1: Robot /By
International Organization for Standardization (ISO). Geneva: ISO, 2006.
ROOFING TILES
BSI
BS EN 539-2 2006 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - P. 2: Test for frost resistance /By British Standards Institution (BSI). London: BSI, 2008.
RUBBER PRODUCTS
ISO
ISO 4642-1 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 1:
Semi-rigid hoses for fixed systems /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 4642-2 2009 Rubber and plastics hoses, non-collapsible, for fire-fighting service - P. 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 29
SAFETY MEASURES
ISO
ISO 10218-1 2006 Robots for industrial environments - Safety requirements - P. 1: Robot /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
SAMPLING METHODS
ISO
ISO 24153 2009 Random sampling and randomization procedures /By International Organization
for Standardization (ISO). Geneva: ISO, 2009.
SEASONINGS ISO
ISO 6571 2008 Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
SEATING BSI
BS EN 12520 2010 Furniture - Strength, durability and safety - Requirements for domestic seating /By British Standards Institution (BSI). London: BSI, 2010.
SEDIMENT ISO ISO 10307-1 2009 Petroleum products - Total sediment in residual fuel oils - P. 1:
Determination by hot filtration /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
ISO 10307-2 2009 Petroleum products - Total sediment in residual fuel oils - P. 2: Determination using standard procedures for ageing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 30
SOLID FUELS
BSI
BS EN 1860-1 2003 Appliances, solid fuels and firelighters for barbecueing - P. 1: Barbecues burning solid fuels - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2006.
BS EN 1860-3 2003 Appliances, solid fuels and firelighters for barbecueing - P. 3: Firelighters
for igniting solid fuels for use in barbecue appliances - Requirements and test methods /By British Standards Institution (BSI). London: BSI, 2006.
SPICES
ISO
ISO 6571 2008 Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
STATISTICAL METHODS OF ANALYSIS
ISO
ISO 24153 2009 Random sampling and randomization procedures /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
STEELS
ISO
ISO 8501-4 2006 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - P. 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TISI Library Accession List (Oct-Dec 2010) Page 31
STEELS - SURFACE TREATMENT ISO ISO 8502-2 2005 Preparation of steel substrates before application of paints and related
products - Tests for the assessment of surface cleanliness - P. 2: Laboratory determination of chloride on cleaned surfaces /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
SURFACE TREATMENT ISO ISO 8501-4 2006 Preparation of steel substrates before application of paints and related
products - Visual assessment of surface cleanliness - P. 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting /By International Organization for
Standardization (ISO). Geneva: ISO, 2006.
ISO 8502-2 2005 Preparation of steel substrates before application of paints and related
products - Tests for the assessment of surface cleanliness - P. 2: Laboratory determination of chloride on cleaned surfaces /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.
SYMBOLS BSI
BS EN 980 2008 Symbols for use in the labelling of medical devices /By British Standards Institution (BSI). London: BSI, 2008.
ISO ISO/IEC 16390 2007 Information technology - Automatic identification and data capture
techniques - Interleaved 2 of 5 bar code symbology specification /By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
TERMINOLOGY ISO ISO/TS 27687 2008 Nanotechnologies - Terminology and definitions for nano-objects -
Nanoparticle, nanofibre and nanoplate /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 32
TEST EQUIPMENT
ISO
ISO 8568 2007 Mechanical shock - Testing machines - Characteristics and performance /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
TESTING
BSI
BS EN 137 2006 Respiratory protective devices - Self-contained open-circuit compressed air
breathing apparatus with full face mask - Requirements, testing, marking /By British Standards Institution (BSI). London: BSI, 2006.
ISO
ISO 9809-1 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction
and testing - P. 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 9809-2 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - P. 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010.
ISO 9809-3 2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction
and testing - P. 3: Normalized steel cylinders /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO; 2010.
ISO 12156-1 2006 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - P. 1: Test method /By International Organization for Standardization (ISO). 2nd ed. Geneva:
ISO, 2006.
ISO/IEC 10373-7 2008 Identification cards - Test methods - P. 7: Vicinity cards /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2008.
TISI Library Accession List (Oct-Dec 2010) Page 33
TESTING CONDITIONS ISO ISO 11476 2010 Paper and board - Determination of CIE whiteness, C/2º (indoor
illumination conditions) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2010. ISO 13041-2 2008 Test conditions for numerically controlled turning machines and turning
centres - P. 2: Geometric tests for machines with a vertical workholding spindle /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ISO 13041-3 2009 Test conditions for numerically controlled turning machines and turning centres - P. 3: Geometric tests for machines with inverted vertical workholding spindles /By International
Organization for Standardization (ISO). Geneva: ISO, 2009. ISO 13041-5 2006 Test conditions for numerically controlled turning machines and turning
centres - P. 5: Accuracy of feeds, speeds and interpolations /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TEXTILE FIBRES ISO ISO 2076 2010 Textiles - Man-made fibres - Generic names /By International Organization for
Standardization (ISO). 5th ed. Geneva: ISO, 2010.
TEXTILES ISO
ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
THERMOPLASTIC POLYMERS ISO ISO 5774 2006 Plastics hoses - Textile-reinforced types for compressed-air applications -
Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.
TISI Library Accession List (Oct-Dec 2010) Page 34
TURNING TOOLS ISO ISO 13041-2 2008 Test conditions for numerically controlled turning machines and turning
centres - P. 2: Geometric tests for machines with a vertical workholding spindle /By International Organization for Standardization (ISO). Geneva: ISO, 2008.
ISO 13041-3 2009 Test conditions for numerically controlled turning machines and turning centres - P. 3: Geometric tests for machines with inverted vertical workholding spindles /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
ISO 13041-5 2006 Test conditions for numerically controlled turning machines and turning
centres - P. 5: Accuracy of feeds, speeds and interpolations /By International Organization for Standardization (ISO). Geneva: ISO, 2006.
TYRES ISO
ISO 28580 2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
VEHICLE COMPONENTS ISO
ISO 28580 2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance
- Single point test and correlation of measurement results /By International Organization for Standardization (ISO). Geneva: ISO, 2009.
VOLATILE MATTER DETERMINATION ISO
ISO 6179 2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 35
VULCANIZED RUBBER
ISO
ISO 48 2010 Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) /By International Organization for Standardization (ISO). 5th ed. Geneva: ISO, 2010.
ISO 2782 2006 Rubber, vulcanized or thermoplastic - Determination of permeability to gases /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.
ISO 6179 2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) /By International
Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2010.
ISO 8013 2006 Rubber, vulcanized - Determination of creep in compression or shear /By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.
ISO 9026 2007 Raw rubber or unvulcanized compounds - Determination of green strength /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.
WASHING MACHINES
ISO
ISO 6804 2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
WATER
ISO ISO 13959 2009 Water for haemodialysis and related therapies /By International Organization
for Standardization (ISO). 2nd ed. Geneva: ISO, 2009.
ISO 19250 2010 Water quality - Detection of Salmonella spp. /By International Organization for
Standardization (ISO). Geneva: ISO, 2010.
TISI Library Accession List (Oct-Dec 2010) Page 36
WATER FLOW ISO ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs
/By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.
WATER - QUALITY ISO ISO 19250 2010 Water quality - Detection of Salmonella spp. /By International Organization for
Standardization (ISO). Geneva: ISO, 2010.
WEIRS ISO ISO 4360 2008 Hydrometry - Open channel flow measurement using triangular profile weirs
/By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2008.
YARN ISO ISO 2062 2009 Textiles - Yarns from packages - Determination of single-end breaking force
and elongation at break using constant rate of extension (CRE) tester /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2009.
TISI Library Accession List (Oct-Dec 2010) Page 37
มาตรฐานไทย กรด มอก. 2495 2553 กรดไขมนละหงขจดนาสาหรบอตสาหกรรมเรซน
กรดไขมน มอก. 2495 2553 กรดไขมนละหงขจดนาสาหรบอตสาหกรรมเรซน
กระสอบ มอก. 729 2553 กระสอบพลาสตก
การซกรด มอก. 766 2552 สญลกษณการซกรดผลตภณฑสงทอ
การทาความสะอาด มอก. 766 2552 สญลกษณการซกรดผลตภณฑสงทอ
การรบกวนคลนวทย มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย
การรบกวนทางแมเหลกไฟฟา มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย
ความเขากนไดทางแมเหลกไฟฟา มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย
ความปลอดภย
มอก. 1548 2551 เครองสบนาไฟฟา เฉพาะดานความปลอดภย มอก. 1552 2551 เครองฆาแมลง เฉพาะดานความปลอดภย
คเตาเชอมโยง มอก. 2404 2551 คเตาตอเครองใชสาหรบใชในทอยอาศย และจดประสงคทวไปทคลายกน
เลม 1-2551 ขอกาหนด เลม 2-2551 คเตาเชอมโยงสาหรบบรภณฑในทอยอาศยและบรภณฑทคลายกน
TISI Library Accession List (Oct-Dec 2010) Page 38
เครองฆาแมลง
มอก. 1552 2551 เครองฆาแมลง เฉพาะดานความปลอดภย
เครองใชไฟฟาในบาน มอก. 1548 2551 เครองสบนาไฟฟา เฉพาะดานความปลอดภย
มอก. 1552 2551 เครองฆาแมลง เฉพาะดานความปลอดภย
มอก. 2461 2552 ตนาเยนบรโภค เฉพาะดานความปลอดภย
เครองสบนา มอก. 1548 2551 เครองสบนาไฟฟา เฉพาะดานความปลอดภย
เครองหมายและสญลกษณ มอก. 766 2552 สญลกษณการซกรดผลตภณฑสงทอ
มอก. 2448 2552 ตวยด - สลกเกลยว หมดเกลยว สลกเกลยวปลอยสองขางและแปนเกลยว - สญลกษณและการระบขนาด
ดาย มอก. 121 ล.6 2552 วธทดสอบสงทอ เลม 6 ขนาดเสนดาย
ดนขาว มอก. 1058 2553 ดนขาวสาหรบอตสาหกรรมส
ตวยด มอก. 2443 2552 ตวยด - การเคลอบสงกะสโดยกรรมวธจมรอน
มอก. 2444 2552 ตวยด - การทดสอบหาความเปราะเพราะโฮโดรเจนโดยการโหลดกอน - วธผวรองรบอยในแนวขนาน
มอก. 2445 2552 ตวยด - การทดสอบแรงบด/แรงบบ
มอก. 2446 2552 การทาผวปองกนสาหรบตวยดเหลกกลาไรสนม ทนทานตอการกดกรอน
มอก. 2447 2552 ตวยด - ระบบประกนคณภาพ
TISI Library Accession List (Oct-Dec 2010) Page 39
มอก. 2448 2552 ตวยด - สลกเกลยว หมดเกลยว สลกเกลยวปลอยสองขางและแปนเกลยว - สญลกษณและการระบขนาด
มอก. 2451 ล.7 2552 สมบตทางกลสาหรบตวยด เลม 7 การทดสอบการบดและแรงบดตาสดสาหรบสลกเกลยวและหมดเกลยวทมขนาดเสนผานศนยกลางระบ 1 มลลเมตร ถง 10 มลลเมตร
มอก. 2453 สมบตทางกลสาหรบตวยดเหลกกลาไรสนมทนทานตอการกดกรอน เลม 1-2552 สลกเลยว หมดเกลยวและสลกเกลยวปลอยสองขาง
เลม 3-2552 หมดเกลยวยดหรอตวยดอนทคลายคลงกนทไมรบความเคนดง เลม 4-2552หมดเกลยวปลอย
มอก. 2457 ตวยด - รอยความไมตอเนองทผว เลม 1-2552 สลกเกลยว หมดเกลยวและสลกปลอยสองขางสาหรบใชงานทวไป เลม 3-2552 สลกเกลยว หมดเกลยวและสลกเกลยวปลอยสองขางสาหรบใชงานพเศษ
ตนาเยน
มอก. 2461 2552 ตนาเยนบรโภค เฉพาะดานความปลอดภย
นามนพช
มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน มอก. 2494 2553 นามนละหงขจดนาสาหรบอตสาหกรรมเรซน
นามนละหง
มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน มอก. 2494 2553 นามนละหงขจดนาสาหรบอตสาหกรรมเรซน
บรรจภณฑ
มอก. 729 2553 กระสอบพลาสตก
แปนเกลยว
มอก. 2448 2552 ตวยด - สลกเกลยว หมดเกลยว สลกเกลยวปลอยสองขางและแปนเกลยว - สญลกษณและการระบขนาด
TISI Library Accession List (Oct-Dec 2010) Page 40
ผารม
มอก. 529 2552 ผารม
เรซน - วตถดบ
มอก. 2494 2553 นามนละหงขจดนาสาหรบอตสาหกรรมเรซน มอก. 2495 2553 กรดไขมนละหงขจดนาสาหรบอตสาหกรรมเรซน
วสดและอปกรณกอสราง
มอก. 1514 2553 สารอดรองไม
วสดและอปกรณไฟฟา
มอก. 955 สายไฟฟาหมฉนวนยาง แรงดนไฟฟาทกาหนดไมเกน 450/750 โวลต
เลม 1-2551 ขอกาหนดทวไป เลม 3-2551 สายไฟฟาทนความรอนหมฉนวนยางซลโคน เลม 4-2551 สายออน และสายไฟฟาออน
มอก. 2404 คเตาตอเครองใชสาหรบใชในทอยอาศย และจดประสงคทวไปทคลายกน
เลม 1-2551 ขอกาหนดทวไป เลม 2-2551 คเตาเชอมโยงสาหรบบรภณฑในทอยอาศยและบรภณฑทคลายกน
วารนช - นามน มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน
วธทดสอบ
มอก. 121 ล.6 2552 วธทดสอบสงทอ
เลม 6-2552 ขนาดเสนดาย เลม 9-2552 แรงดงสงสดและการยดของผาทแรงดงสงสด โดยวธดงเตมหนากวางของชน
ทดสอบ เลม 26-2552 สวนผสมของเสนใย 2 ชนด
มอก. 2451 ล.7 2552 สมบตทางกลสาหรบตวยด เลม 7 การทดสอบการบดและแรงบดตาสดสาหรบสลกเกลยวและหมดเกลยวทมขนาดเสนผานศนยกลางระบ 1 มลลเมตร ถง 10 มลลเมตร
TISI Library Accession List (Oct-Dec 2010) Page 41
สลกเกลยว มอก. 2449 2552 สลกเกลยวและหมดเกลยวใชงานทวไป - อนกรมเมตรก - รศมใตหวเกลยว
มอก. 2450 2552 สลกเกลยวหมดเกลยวและสลกเกลยวปลอยสองขาง - ความยาวระบและความยาวเกลยวสาหรบสลกเกลยวใชงานทวไป
มอก. 2451 ล.7 2552 สมบตทางกลสาหรบตวยด เลม 7 การทดสอบการบดและแรงบดตาสดสาหรบสลกเกลยวและหมดเกลยวทมขนาดเสนผานศนยกลางระบ 1 มลลเมตร ถง 10 มลลเมตร
มอก. 2453 ล.1 2552 สมบตทางกลสาหรบตวยดเหลกกลาไรสนมทนทานตอการกดกรอน - เลม1 สลกเลยว หมดเกลยวและสลกเกลยวปลอยสองขาง
มอก. 2454 2552 สลกเกลยวหวหกเหลยมแบบมหนาแปลน - อนกรมขนาดเลก
มอก. 2456 2552 สลกเกลยวยดชนดมรองผาแบบปลายเรยบ
มอก. 2457 ตวยด - รอยความไมตอเนองทผว เลม 1-2552 สลกเกลยว หมดเกลยวและสลกปลอยสองขางสาหรบใชงานทวไป เลม 3-2552 สลกเกลยว หมดเกลยวและสลกเกลยวปลอยสองขางสาหรบใชงานพเศษ
สายไฟฟา มอก. 955 สายไฟฟาหมฉนวนยาง แรงดนไฟฟาทกาหนดไมเกน 450/750 โวลต
เลม 1-2551 ขอกาหนดทวไป เลม 3-2551 สายไฟฟาทนความรอนหมฉนวนยางซลโคน
เลม 4-2551 สายออน และสายไฟฟาออน
สารอดรองไม มอก. 1514 2553 สารอดรองไม
สงทอ มอก. 121 วธทดสอบสงทอ
เลม 6-2552 ขนาดเสนดาย เลม 9-2552 แรงดงสงสดและการยดของผาทแรงดงสงสด โดยวธดงเตมหนากวางของชน
ทดสอบ
เลม 26-2552 สวนผสมของเสนใย 2 ชนด
TISI Library Accession List (Oct-Dec 2010) Page 42
ส มอก. 1406 2553 สเคลอบดานแอลคด
ส - ตวเตม มอก. 1058 2553 ดนขาวสาหรบอตสาหกรรมส
ส - นามน มอก. 741 2553 นามนละหงสาหรบอตสาหกรรมเรซน
สเคลอบ มอก. 1406 2553 สเคลอบดานแอลคด
หมดเกลยว มอก. 2448 2552 ตวยด - สลกเกลยว หมดเกลยว สลกเกลยวปลอยสองขางและแปนเกลยว -
สญลกษณและการระบขนาด มอก. 2449 2552 สลกเกลยวและหมดเกลยวใชงานทวไป - อนกรมเมตรก - รศมใตหวเกลยว
มอก. 2450 2552 สลกเกลยวหมดเกลยวและสลกเกลยวปลอยสองขาง - ความยาวระบและความยาวเกลยวสาหรบสลกเกลยวใชงานทวไป
มอก. 2451 ล.7 2552 สมบตทางกลสาหรบตวยด เลม 7 การทดสอบการบดและแรงบดตาสดสาหรบสลกเกลยวและหมดเกลยวทมขนาดเสนผานศนยกลางระบ 1 มลลเมตร ถง 10 มลลเมตร
มอก. 2452 2552 หมดเกลยวพรอมกานไมมหวเกลยวชนดมรองผา มอก. 2453 สมบตทางกลสาหรบตวยดเหลกกลาไรสนมทนทานตอการกดกรอน
เลม1-2552 สลกเลยว หมดเกลยวและสลกเกลยวปลอยสองขาง เลม 3-2552 หมดเกลยวยดหรอตวยดอนทคลายคลงกนทไมรบความเคนดง
เลม 4-2552 หมดเกลยวปลอย
มอก. 2455 2552 หลมสแฉกสาหรบหมดเกลยว
มอก. 2457 ตวยด - รอยความไมตอเนองทผว เลม 1-2552 สลกเกลยว หมดเกลยวและสลกปลอยสองขางสาหรบใชงานทวไป เลม 3-2552 สลกเกลยว หมดเกลยวและสลกเกลยวปลอยสองขางสาหรบใชงานพเศษ
มอก. 2458 2552 หมดเกลยวหวกะทะกบหลมสแฉกชนด H หรอชนด Z - ผลตภณฑขน A
TISI Library Accession List (Oct-Dec 2010) Page 43
มอก. 2459 ล.1 2552 หมดเกลยวหวจมแบน (หวแบบทวไป) กบหลมสแฉก ชนด H หรอชนด Z - ผลตภณฑขน A เลม 1 เหลกกลาชนสมบต 4.8
อปกรณสองสวาง มอก. 1955 2551 บรภณฑสองสวางและบรภณฑทคลายกน: ขดจากดสญญาณรบกวนวทย
เอทานอล มอก. 640 2553 เอทานอล
เลม.1 2553 เอทานอลใชทางเภสชกรรม เลม.2 2553 เอทานอลใชทางอตสาหกรรม เลม.3 2553 เอทานอลใชเปนเชอเพลง
TISI Library Accession List (Oct-Dec 2010) Page 44
Alphabetical Subject Index Subject Page Acceptance specification 1
Acoustics 1
Agricultural products 1
Air 2
Air-conditioning equipment 2
Air filters - Classification systems 2
Air filters - Performance testing 2
Air filters - Testing conditions 2
Anchors 3
Animal feed 3
Bar codes 3
Biological analysis and testing 3
Board (paper) 4
Breaking load 4
Cements 4
Cereal products 5
Cereals 5
Cetane number 5
Chemical analysis and testing 5
Chemistry - Analysis 6
Coated fabrics 6
Colour 6
Compressed-air systems 6
Cooling systems 6
Creep testing 7
Dangerous materials 7
TISI Library Accession List (Oct-Dec 2010) Page 45
Subject Page Data layout 7
Data processing 7
Dental prosthesis 8
Dentistry 8
Design 8
Diesel fuels 9
Dimensional tolerances 9
Dishwashing machines 9
Electric cables 9
Elongation 10
Equipment safety 10
Essential oils 10
Filtration 10
Fire hoses 10
Fire resistance 11
Firefighting equipment 11
Flexible pipes 11
Flow measurement 12
Food - Analysis 12
Food control 13
Food products 13
Food technology 13
Fuel oil 13
Fuels 13
Furniture 14
Gas cylinders 14
Gas permeability 14
Glass 14
TISI Library Accession List (Oct-Dec 2010) Page 46
Subject Page Gypsum plaster 15
Hardness measurement 15
Heat pumps 15
Identification methods 15
Identity cards 16
Implants (surgical) 16
Information exchange 16
Information technology 17
Internal combustion engines 18
Labels 18
Laboratory equipment 18
Laboratory glassware 18
Latices 19
Liquefied petroleum gas 19
Liquid ammonia 19
Liquid fuels 19
Man-made fibres 19
Management techniques 19
Meat 20
Meat products 20
Mechanical shock 20
Medical equipment 20
Microbiological analysis 21
Milk 21
Milk products 21
Motor vehicles 22
Nanotechnologies 22
Natural rubber 22
TISI Library Accession List (Oct-Dec 2010) Page 47
Subject Page Packaging 23
Paints 23
Paper 23
Paper pulps 24
Particle boards 24
Performance testing 24
Petroleum products 24
Physical testing 25
Pipe coatings 25
Pipettes 25
Plasterboard 25
Plasticity testing 26
Pneumatic equipment 26
Protective equipment 26
Quality assurance systems 26
Radiofrequencies 26
Reflectance factor 27
Refrigerators 27
Respiratory system 27
Road vehicles 28
Robots 28
Roofing tiles 28
Rubber products 28
Safety measures 29
Sampling methods 29
Seasonings 29
Seating 29
Sediment 29
TISI Library Accession List (Oct-Dec 2010) Page 48
Subject Page Solid fuels 30
Spices 30
Statistical methods of analysis 30
Steels 30
Steels - Surface treatment 31
Surface treatment 31
Symbols 31
Terminology 31
Test equipment 32
Testing 32
Testing conditions 33
Textile fibres 33
Textiles 33
Thermoplastic polymers 33
Turning tools 34
Tyres 34
Vehicle components 34
Volatile matter determination 34
Vulcanized rubber 35
Washing machines 35
Water 35
Water flow 36
Water - Quality 36
Weirs 36
Yarn 36
TISI Library Accession List (Oct-Dec 2010) Page 49
ดรรชนหวเรอง หวเรอง หนา
กรด 37
กรดไขมน 37
กระสอบ 37
การซกรด 37
การทาความสะอาด 37
การรบกวนคลนวทย 37
การรบกวนทางแมเหลกไฟฟา 37
ความเขากนไดทางแมเหลกไฟฟา 37
ความปลอดภย 37
คเตาเชอมโยง 37
เครองฆาแมลง 38
เครองใชไฟฟาในบาน 38
เครองสบนา 38
เครองหมายและสญลกษณ 38
ดาย 38
ดนขาว 38
ตวยด 38
ตนาเยน 39
นามนพช 39
นามนละหง 39
บรรจภณฑ 39
แปนเกลยว 39
ผารม 40
เรซน - วตถดบ 40
วสดและอปกรณกอสราง 40
วสดและอปกรณไฟฟา 40
TISI Library Accession List (Oct-Dec 2010) Page 50
หวเรอง หนา วารนช - นามน 40
วธทดสอบ 40
สลกเกลยว 41
สายไฟฟา 41
สารอดรองไม 41
สงทอ 41
ส 42
ส - ตวเตม 42
ส - นามน 42
สเคลอบ 42
หมดเกลยว 42
อปกรณสองสวาง 43
เอทานอล 43