Atlas Evaluation & Inspection Services

943 E Hazelwood Ave, Rahway, NJ 07065 Ph: 732–388-7711 Fax: 732–388-7767 Website: www.aeisndt.com

ISO 17025

NYC SPECIAL INSPECTION

AGENCY

STATEMENT OF QUALIFICATION FOR ATLAS EVALUATION & INSPECTION SERVICES

AEIS LLC [dba Atlas Evaluation & Inspection Services] (AEIS) is a Disadvantaged Business Enterprise (DBE) and minority women owned business enterprise (MWBE) providing variety of services for inspection, testing, failure analysis, engineering and research of materials.

As an independent commercial inspection and testing agency, AEIS provides comprehensive Special Inspection Agency, Construction Material Testing, Non Destructive Testing and Metallurgical Laboratory Services to our clients.

AEIS is a dynamic, global organization that provides these services to the construction as well as aerospace, automotive, defense, electronic, manufacturing, marine, medical devices and petrochemical industries.

Our engineers and scientists have over 125 years of combined experience in failure analysis and prevention of failures. Their expertise is optimized by the addition of state-of-art equipment to our laboratories and inspection departments. Inspection and tests are conducted in accordance with ABS, AFNOR, AISC, API, ASME, ASTM, AWS, BIS, BS, BV, DIN, DNV, EN, JIS, Lloyd’s Register, NACE, NYSSCM, PANYNJ, SAE, SSPC, as well as clients’ and other agencies’ specifications/ criteria.

THE CORE TEAM

Our core team is comprised of the following industry experts:

Puja Goel— Owner and President: Started AEIS LLC, October 2008 in New York as Minority Women owned Disadvantaged Small Business Enterprise. BS Physics with expertise in various NDT Techniques. Trained in Mechanical Testing of Metals by ASM International. Responsible for all statistical analysis of testing data. Financial Head of the Organization.

Nagesh Goel—Vice President: Mechanical Engineer with specialization in Failure Analysis and NDT. ASNT ACCP NDT Level III certified. 20 years’ experience in inspection of components, assemblies and structures. Has extensive experience on Construction Code aspects.

Manan Shah, P.E—Technical Director: Registered Professional Civil Engineer with over 10 years’ experience in construction inspection, testing, and supervision. Having been involved with the MTA Capital Construction Projects, Mr. Shah’s expertise and responsibility lies in the areas of Soils, Concrete, Aggregate, Asphalt, and Masonry Inspections/ Tests.

Page 2 of 10

Welding and Non-Destructive Testing and Inspections. Herb Goldenberg, P.E—Senior Technical Director: Registered Professional Mechanical Engineer with over 50 years of experience in failure analysis and engineering investigations. This core team is supported by myriad of experts throughout the globe whose specializations include composites, ceramics, nano-materials, polymers, and disciplines range from metallurgical engineering to electronics and instrumentation. The work is executed by a dedicated team of engineers, scientists, and technicians with the necessary training, certifications, and qualifications. As is required for a comprehensive inspection and testing program, we take an interdisciplinary approach to solve complex problems.

ACCREDITATIONS AND CERTIFICATIONS

EIS MAINTAINS AN EXEMPLARY QUALITY SYSTEM BASED UPON CONTINUAL IMPROVEMENT, REFLECTED BY THE MANY COMPANY ACCREDITATIONS AND PERSONNEL CERTIFICATIONS.

Page 3 of 10

SCOPE OF SERVICES

TYPES OF REPRESENTATION—AEIS LLC performs services for its clients in one or more of the following ways:

1. SPECIAL INSPECTION AGENCY SERVICES 2. CONSTRUCTION MATERIALS LABORATORY 3. NON DESTRUCTIVE TESTING SERVICES 4. METALLURGICAL TESTING LABORATORY

SPECIAL INSPECTION AGENCY SERVICES

SPECIAL INSPECTION AGENCY—AEIS is accredited as a Class I Special Inspection Agency in New York City, New Jersey and able to operate in other jurisdictions, as needed. Our Scope of Accreditation is as follows:

STRUCTURAL MATERIALS AND CONSTRUCTION OPERATIONS STRUCTURAL STEEL – WELDING STRUCTURAL STEEL DETAILS STRUCTURAL STEEL HIGH STRENGTH BOLTING STRUCTURAL STEEL COLD FORMED STEEL HIGH-PRESSURE STEAM PIPING (WELDING) HIGH-PRESSURE HOT WATER PIPING (WELDING) HIGH-PRESSURE GAS PIPING (WELDING) ALUMINUM WELDING NON DESTRUCTIVE TEST INSPECTION

ULTRASONIC INSPECTION MAGNETIC PARTICLE INSPECTION LIQUID DYE PENETRANT INSPECTION RADIOGRAPHIC INSPECTION

CONCRETE CAST-IN-PLACE CONCRETE PRECAST MASONRY SUBGRADE INSPECTION SUBSURFACE CONDITIONS- FILL PLACEMENT AND IN PLACE DENSITY SUBSURFACE INVESTIGATIONS (BORINGS/ TEST PITS) DEEP FOUNDATION ELEMENTS HELICAL PILES VERTICAL MASONRY FOUNDATION ELEMENTS UNDERPINNING STRUCTURAL STABILITY-EXISTING BUILDINGS EXCAVATIONS - SHEETING, SHORING, AND BRACING

Page 4 of 10

POST–INSTALLED ANCHORS

FIRE PROTECTION SYSTEMS AND FIRE-RESISTANT CONSTRUCTION SPRAYED FIRE-RESISTANT MATERIALS

MASTIC AND INTUMESCENT FIRE RESISTANT COATINGS SPRINKLER SYSTEMS STANDPIPE SYSTEMS FIRE-RESISTANT PENETRATIONS AND JOINTS

EMERGENCY AND STANDBY POWER SYSTEMS (GENERATORS)

PLUMBING AND MECHANICAL SYSTEMS MECHANICAL SYSTEMS FUEL-OIL STORAGE AND FUEL OIL PIPING SYSTEMS HEATING SYSTEMS

GENERAL BUILDING CONSTRUCTION WALL PANELS, CURTAIN WALLS AND VENEERS EXTERIOR INSULATION FINISH SYSTEMS (EIFS) CHIMNEYS FLOOD ZONE COMPLIANCE LUMINOUS EGRESS PATH MARKINGS

Our strength comes from skilled and qualified personnel using calibrated and proper inspection equipment while working under the supervision of highly qualified and conscientious management. Online access to expeditious reports and deficiency logs provides you the tools necessary to expedite activities on your project.

CONSTRUCTION MATERIAL LABORATORY

SOILS TESTING This lab is equipped with modern furnaces, automatic sieve shakers, compactors and other equipment. AMRL accreditation for the lab is awaited shortly. Tests are performed per ASTM D1557, D1140, D6913, D4643, D422, D854, D1721, C97, C99, D1883, D2166, D2080, D12487, D2488, , and other applicable codes/ standards/ specifications. CONCRETE TESTING The fully equipped laboratory has a 250K and 500K testing machines, a misting concrete curing room and other equipment for running operations per code requirements. This lab is accredited by CCRL and is awaiting a NYCDOB Audit. Tests are performed per ASTM C39, C42, C293, C918, C496, C457. C1723, C856, C1202, C157, C780, C140, and other applicable codes/ standards/ specifications. MASONRY/ MORTAR/ GROUT TESTING Tests are performed per ASTM C1314, C109, C90, C140, C129, C952, E515 and other applicable codes/ standards/ specifications.

Page 5 of 10

AGGREGATE TESTING Tests are performed per ASTM C88, C117, C123, C127, C128, C566, C535, C780 and other applicable codes/ standards/ specifications. ASPHALT TESTING Tests are performed per ASTM D979, D2041, D2172, D2726, D5444 and other applicable codes/ standards/ specifications. FIRECODE TESTING Tests are performed per ASTM E605 and other applicable codes/ standards/ specifications.

NON DESTRUCTIVE TESTING SERVICES

AEIS Specializes in Welding and NDT Inspections. Our strong management team and dedicated personnel can take up projects of any size in the field and fabrication shops around the globe. Specifically, our NDT Personnel are ACCP/ ASNT Level III, Level II and EN473 Level III, Level II certified for performing NDT. Our personnel are trained and tested on a vast array of real flaw samples, calibration blocks and reference specimens. The equipment utilized is state-of-art digital equipment with the necessary accessories.

COATINGS INSPECTIONS—As the only independent SSPC QP5 accredited Coating Inspection Agency in the NY Metro Area, we are uniquely positioned to perform thorough and comprehensive coatings inspections on your projects. Inspectors scheduled have NACE I/ II/ III certifications as required. ULTRASONIC TESTING—Our capabilities with this technique extend beyond the standard UT, where by materials such as martensitic and duplex stainless steels, cast irons, copper, aluminum and alloy steels are inspected in various shapes: Structural, Pipe, Bars Sheets etc. ULTRASONIC PHASED ARRAY INSPECTIONS—Using advanced Omniscan MX2 32:128 Array instruments, cobra, hydroform, pipe scanners, and trained personnel, we are making inroads on this new and emerging technique. Our personnel are ready to perform PAUT per the latest AWS D1.1:2015 Code. NYSDOT UT—AEIS can provide Ultrasonic Testing by NYSDOT qualified UT Technicians. ULTRASONIC THICKNESS SURVEY—Our highly skilled personnel utilize Olympus NDT 38DL Plus digital instrument with an on-board waveform display allowing its operator to instantly evaluate the validity of each and every wall thickness measurement taken. The equipment also has ID oxide scale, thru paint thickness and data logging capability. Detailed Reports and analysis accompany the thickness Survey Data RADIOGRAPHIC TESTING—Our In-house personnel perform radiography using an X-Ray Cabinet and Digital Film based systems. Field radiographic operations are expected to start in the spring of 2016. MAGNETIC PARTICLE TESTING—Portable Yokes, Prods to Bench Units; all types of instrumentation is available to our qualified personnel. MT inspections are carried out on variety of applications, from Roadway tankers (fluorescent) to amusement park rides to structural welds and crane components. PENETRANT TESTING—Large stainless tankers, copper bus bars, aluminum stair treads and welds in ferrous and non-ferrous metals are routinely inspected by our personnel.

Page 6 of 10

WELD INSPECTION—AEIS has AWS Certified Welding Inspectors who are available for code inspections in the field and your facility, globally. WELDER QUALIFICATION—Welder qualification to all national and international codes and specification is performed. All tests are witnessed by a Certified Welding Inspector and welding variables monitored using NIST traceable calibrated equipment. AEIS is an AWS Accredited Test Facility (Structural Welds) and NYC OTCR Approved Agency for qualifying Pipe Welders. VERIFICATION AT VENDOR PREMISES—Inspections at vendors’ premises of items such as Castings, Forging components, valves, piping components, pumps, finished and semi-finished components etc. PORTABLE HARDNESS TESTING SURVEY—Portable Rockwell, Brinell, Leeb, Ultrasonic Hardness Testers. COUPON EXTRACTION (MECHANICAL PROPERTIES AND WELDABILITY)—Our trained technicians aim to extract the smallest possible coupons from structures, thereby maintaining the structural integrity of an existing structure to determine weldability and mechanical properties. INSPECTION OF CRANES AND DERRICKS—Typical Inspection on Cranes requires Magnetic Particle Testing. However, our qualified and trained welding/ NDT inspectors make determinations if other inspections are necessary, thereby reducing the liability of all concerned parties. RESIDUAL STRESS MEASUREMENT—AEIS utilizes special strain gage rosettes and miniature blind hole drilling (0.03”-0.16”) per ASTM E837 to evaluate residual stresses in structures. PRESSURE VESSELS AND PIPING—Inspection of welded pipelines, piping, pressure vessels, other weldments by qualified Inspectors. EQUIPMENT INSPECTIONS—Inspection of new and installed equipment by experienced engineers and technicians for verifying compliance to specifications/ standards. BORESCOPE INSPECTION—Inspection of piping internal surfaces for damage, flaw size measurement and obstructions are provided. POSITIVE MATERIAL IDENTIFICATION—Our state of the art Niton XL3t 700 and qualified personnel can provide accurate and fast analysis of your components for Positive Material Identification. HYDROSTATIC TESTING—Witnessing of Hydrostatic tests on pressure piping is provided. Where, necessary, this is supplemented by providing ISO17025 calibrated gages. RESIDUAL LIFE ASSESSMENT STUDIES—The actual life of a component may be more than the design life if the properties assumed were lower or the factor of safety was higher or if the plant was operated conservatively or the oxidation effects were over estimated. AEIS performs periodic examination of critical components to provide RLA. These studies are carried out by performing various routine NDT techniques such as Visual examination, Dimensional measurement, Ultrasonic thickness gauging, Penetrant testing, Magnetic particle inspection using wet fluorescent method, and special techniques such as Eddy current testing, fiber optics, in-situ replica technique to study the material degradation and the presence of micro cracks, ultrasonic testing using high frequency pulser and transducer for measurement of oxide scale, ultrasonic attenuation measurement to detect hydrogen damage, boresonic inspection using multi probes with special attachment to detect cracking in rotor bores and special eddy current technique to detect turbine blade root cracks. GROUND PENENTRATING RADAR SURVEY—AEIS utilizes very high resolution scanning radar and experienced technicians for performing GPR surveys.

Page 7 of 10

TESTING LABORATORY SERVICES (SEE ATTACHED FOR ISO17025 SCOPE)

MECHANICAL TESTING The Mechanical Laboratory in Rahway, NJ has a fully equipped machine shop capable of complete specimen and fixture preparation. We can perform routine tensile and compression tests up to 400,000 pounds on our equipment, and higher capacity testing can be performed using customized solutions. Some of testing performed by the mechanical lab are: Tensile Tests, Load Tests, Bend Tests, Wedge Tensile Tests, Nick Break, Charpy and Izod Impact test, Drop Weight Tear Test, Elastomeric Bridge Bearing Tests, Hardness (Brinell, Rockwell, Vickers, Micro, Leeb, Shore), Macro-etch etc. CHEMICAL ANALYSIS Our fully equipped Chemical laboratory in Rahway, NJ is capable of performing analysis on metals and liquids. We utilize Optical emission spectroscopy, atomic absorption spectroscopy, X-Ray Fluorescence, Combustion analysis and Wet Chemical Analysis, as required in order to achieve the desired results. WELDABILITY STUDIES AND ANALYSIS—Our routine weldability reports have information regarding the chemical composition, Carbon equivalent and recommendation of electrodes that may be utilized. In addition, we also perform fabrication weldability tests such as Varestraint Hot cracking Test; Lehigh restraint/ Controlled Thermal severity/ Cruciform delayed cracking Tests METALLURGICAL INVESTIGATIONS METALLOGRAPHIC STUDIES—Light Microscopy, Particle Analysis (Identification, Size, Distribution), Metallurgical Evaluation (Microstructure, Grain Size, Inclusion Rating, Heat Treat Analysis, Plating Thickness, Intergranular Attack, Porosity of Metals, Ceramics, & Composites), Coating Analysis, Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS), Physical Metallurgy Analysis, X-Ray Fluorescence (XRF), Quantitative Image Analysis & Surface Topography, Fractography. FAILURE ANALYSIS—Metallographic Examination, chemical and Mechanical Testing, Non-Destructive Testing, Fracture Mechanics and Simulated-Service Condition Testing. REVERSE ENGINEERING—When documentation or knowledge of the original design or manufacture is lost or not available in the company, reverse engineering may be done to fabricate a replacement component. This is not meant to copy or do illegal things. As an example, if a shaft fails in machinery, if replacement is not available from the original equipment supplier, by studying the shaft and its material properties one can fabricate a substitute. DEFORMULATION—This is the separation, identification and quantification of various components in a formulation. If any unknown material is given, by carrying out suitable tests, it may be possible to catalogue the various material components. FINITE ELEMENT ANALYSIS—Finite Element Method (FEM) analysis is used both for design and for failure analysis. Finite element analysis can be applied to stress analysis and heat transfer. The main advantage of FEM is that it can be applied to complex industrial components where the regular closed form solutions

Page 8 of 10

cannot be applied satisfactorily. Optimization of a structural design or a product design can be attempted in FEM analysis. This saves time and expenditure. COMPREHENSIVE TESTING PROGRAMS We provide comprehensive testing programs for many applications that require a muti-disciplinary approach WELDING PROCEDURE/ PERFORMANCE QUALIFICATION TESTING—Our Laboratory is completely geared to perform all your PQR/ WPQR testing in-house: Radiography, Ultrasonic, Magnetic Particle, Penetrant, Transverse Tensile, All Weld Metal Tensile, Charpy V Notch Impact, Macroetch, Macro and Micro Hardness Survey, Bends, Rupture, Break, Peel, Nick Break, Weld Metal Chemical Analysis. CALIBRATION SERVICES AEIS performs NIST traceable calibration of NDT equipment (UT Flaw Detectors, UT Thickness Meters, Magnetic Yoke), Skidmore Bolt tensioning devices and Torque wrenches to conform to AWS, ASME and ASTM Codes/ Standards. PRODUCT TESTING Testing of product components and assemblies to verify compliance to stated requirements. CORROSION ANALYSIS Salt Spray, CASS, coating thickness, and corrosion analysis studies on materials.

CONSULTING SERVICES

Welding Consultation—Our experienced Welding consultants and certified welding inspectors provide a wide array of services related to weld inspection and testing:

• Welding Procedures—AEIS can prepare welding procedures for commonly used materials and processes as well as exotic alloys and emerging welding processes. The WPS and PQR can be written to comply with AWS, ASME, API, NAVSEA, SAE or virtually any code/ specification. Where possible, we recommend the use of AWS SWPSs to provide cost savings to the client by eliminating procedure qualification testing.

• Heat treatment procedures—Generic and specific heat treatment guidelines and procedures are written to meet ASME and AWS requirements. This includes pre-heating, post-heating, PWHT and heat straightening procedures.

NDT Consultation—NDT consultation in conventional as well as emerging techniques can be provided almost anywhere in the world. Work performed from back office or on-site, as required:

• NDT Program Development—We can assist you in developing and maintaining your in-house NDT Program in accordance with ASNT SNT-TC 1A, ANSI CP 189, NAS 410 or other certification standards. This may involve preparation of written practice and/ or NDT procedures.

• Audits—AEIS can perform Quality Audit of your NDT Program, your systems and services, and/ or

Page 9 of 10

your NDT Level I, II and III personnel. GAP Analysis for NADCAP/ PRI Audit can also be performed. • Examinations—We administer Level I, II and III examinations in accordance with your company

written practice. Specific exams are prepared for the AWS, ASME, and API Codes • Consultation—AEIS is always keen on finding solutions to unique NDT problems. We provide

interface with manufacturing representatives for developing product specific NDT equipment/ application and evaluate emerging NDT techniques for your application. We also provide “Outside Agency” Services, as defined in SNT-TC-1A.

Audits—We can perform Quality audits of Welding Inspection and NDT operations on your projects to ensure integrity of the structures. Additionally, audit consultation, procedure preparation, technical guidance and auditor interaction can be provided for various technical and management audits such as ISO 9001, ISO 17025, ISO 17020/ International Accreditation Services AC 89/ 98/ 172/ 204/ 291, AISC, NADCAP, ASME Code Stamps, ASME NQA-1 and 10CFR50 Appendix B. We also perform initial and periodic audits on non-AISC certified Structural Steel shops to comply with ICC requirements.

TECHNICAL TRAINING

Technical Training— Technical training is provided in welding, inspection and Nondestructive Testing. We also conduct several code clinics to discuss various construction code aspects.

• Engineering/ Technical Information Courses—These courses were started at the request of the professionals in the industry with whom we had spirited discussions about the topics. These are typically 6 hour sessions, held on Fridays at our laboratory in Rahway, NJ. In the near future PDH shall be available through NYSED. All proceeds from these courses are donated to the charity “Girl Rising”.

• Code Clinics—AWS D1.1, AWS D1.1/ Section 6 (Inspection), AWS D1.1/ Section 7 (Stud Welding), AWS D1.2 (Structural Welding Code - Aluminum), AWS D1.3 (Structural Welding Code - Sheet Steel), AWS D1.4 (Structural Welding Code - Reinforcing Steel), AWS D1.6 (Structural Welding Code-Stainless Steel), API 1104, ASME B 31.9 (Building Services Piping), and ASME B 31.1 (Power Piping)

• Certification Training (NDT) —Training and Certification for ASNT NDT Level I/ II/III in Radiographic Testing, Ultrasonic Testing, Magnetic Particle Testing and Penetrant Testing (IAW SNT-TC-1A/ NAS410 and Employer’s Written Practice).

• Exam Prep Courses—Preparation for AWS CWI, and ICC High Strength Bolting Exam is provided.

WHY AEIS?

Atlas Evaluation & Inspection Services is striving to bring the latest in technological advancement for the services provided. The professionals at AEIS are committed to our client’s success. We believe in providing quality services of unmatched value. Many characteristics have given AEIS the edge over many other service providers in the industry, including the following:

Page 10 of 10

• Comprehensive One Stop Shop for all your Inspection and Testing Needs • Industries’ leading experts in Metallurgy, Welding and NDT are a phone call away • Specialization in an extremely wide array of Non-Destructive Testing Techniques • Metallurgists with vast experience • Latest technological support from our offices worldwide • Dedicated Customer Service • Online Project Deficiency Tracking System with Client Access • Online Access of Inspection Reports for Clients • Knowledgeable, skilled and dependable inspectors • Competitive Pricing • NYC Special Inspection Agency Accreditation (See Certificate for Scope) • ISO 17025 Laboratory (See Certificate for Scope) • CCRL approved Concrete Testing Laboratory • SSPC approved QP5 Coating Inspection Agency • Our international locations are approved by many large domestic & foreign customers as

well as government installations and subcontractors • Numerous Value Added Services • No Minimum Service Orders

If you are looking for committed professionals for technical consulting, training, inspection, and research in the areas mentioned above, please call Atlas Evaluation and Inspection Services. You will be sure to find competitive pricing along with the quality service that you deserve. Best Regards, AEIS LLC Nagesh Goel Vice President

ATTACHMENTS:

1. ACCREDITATIONS PACKAGE

NYC Department of Buildings

License Details=== SPECIAL INSPECTION AGENCY ===

AEIS LLCDate Registered: 07/08/2014 License #: 000280Status: A - ACTIVE Expiration: 10/02/2018Office Address: 943 E HAZELWOOD AVE RAHWAY, NJ 07065Business Phone: 732-388-7711 Agency Information

Agency Name: AEIS LLCOwner Name: GOEL PUJA

Owner Phone:Agency Address: 943 E HAZELWOOD AVE RAHWAY NJ 07065

E-Mail:

Director InformationLicense Type: PROFESSIONAL ENGINEER License No: 091740

Title: DIRECTORName: MANAN SHAH

Technical Director InformationLicense Type: PROFESSIONAL ENGINEER License No: 048527

Title: SENIOR TECHNICAL DIRECTORName: HERBERT GOLDENBERG

License Type: PROFESSIONAL ENGINEER License No: 091740 Title: DIRECTOR

Name: MANAN SHAHLicense Type: PROFESSIONAL ENGINEER License No: 088499

Title: TECH DIRECTORName: ELIZABETH MATTFIELD

Special InspectionsClass Number Special Inspections Code/Section

01 - CLASS 1 RC1002 LUMINOUS EGRESS PATH MARKINGS BC 1704.30, BC 1024.801 - CLASS 1 RC1003 EMERGENCY & STANDBY POWER SYSTEMS (GENERATORS) BC 1704.13 / BC 270201 - CLASS 1 RC1004 STRUCTURAL STEEL - WELDING BC 1704.3.101 - CLASS 1 RC1005 STRUCTURAL STEEL - HIGH STRENGTH BOLTING BC 1704.3.301 - CLASS 1 RC1006 STRUCTURAL COLD-FORMED STEEL BC 1704.3.401 - CLASS 1 RC1007 CONCRETE - CAST-IN-PLACE BC 1704.401 - CLASS 1 RC1008 CONCRETE - PRECAST BC 1704.401 - CLASS 1 RC1009 CONCRETE - PRESTRESSED BC 1704.401 - CLASS 1 RC1012 MASONRY BC 1704.502 - CLASS 2 RC1014 WOOD - INSTALLATION OF HIGH-LOAD DIAPHRAGMS BC 1704.6.1

02 - CLASS 2 RC1015 WOOD - INSTALLATION OF METAL-PLATE-CONNECTED TRUSSES BC 1704.6.2

02 - CLASS 2 RC1016 WOOD - INSTALLATION OF PREFABRICATED I-JOISTS BC 1704.6.301 - CLASS 1 RC1017 SUBGRADE INSP / SOILS-SITE PREP BC 1704.7.101 - CLASS 1 RC1018 SUBSURFACE / SOILS-FILL PLACEMENT IN-PLACE DENSITY BC 1704.7.2 / BC 1704.7.301 - CLASS 1 RC1019 SUBSURFACE / SOILS INVESTIGATION (BORINGS/TEST PITS) BC 1704.7.401 - CLASS 1 RC1020 DEEP FOUNDATIONS / PILES BC 1704.801 - CLASS 1 RC1021 VERTICAL MASONRY FOUNDATION ELEMENTS/PIERS BC 1704.901 - CLASS 1 RC1022 UNDERPINNING BC 1704.20.3, BC 181401 - CLASS 1 RC1023 WALL PANELS, CURTAIN WALLS, AND VENEERS BC 1704.1001 - CLASS 1 RC1024 SPRAYED FIRE-RESISTANT MATERIALS BC 1704.1101 - CLASS 1 RC1025 EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) BC 1704.1301 - CLASS 1 RC1026 SMOKE CONTROL SYSTEMS BC 1704.1501 - CLASS 1 RC1027 MECHANICAL SYSTEMS BC 1704.1601 - CLASS 1 RC1028 FUEL-OIL STORAGE AND FUEL-OIL PIPING SYSTEMS BC 1704.1701 - CLASS 1 RC1029 HIGH-PRESSURE STEAM PIPING (WELDING) BC 1704.1801 - CLASS 1 RC1030 FUEL-GAS PIPING (WELDING) BC 1704.1901 - CLASS 1 RC1031 STRUCTURAL STABILITY - EXISTING BUILDINGS BC 1704.20.1

Page 1 of 2License Details

9/17/2015file:///Z:/011%20AEIS%20Certificates/NYC%20DOB/License%20Details.html

01 - CLASS 1 RC1032 MECHANICAL DEMOLITION BC 1704.20.401 - CLASS 1 RC1033 EXCAVATION - SHEETING, SHORING, AND BRACING BC 1704.20.201 - CLASS 1 RC1034 SOIL PERC. TEST-STORM WATER SYSTEM (DRYWELL) BC 1704.21.1.2

01 - CLASS 1 RC1035 SOIL PERC. TEST-INDIVID ON-SITE PRIVATE SEWAGE DISP.(SEPTIC) BC 1704.22

01 - CLASS 1 RC1036 ON-SITE STORM WATER DRAIN. DISP. /DETENT INSTALL (DRYWELL) BC 1704.21.2

02 - CLASS 2 RC1037 INDIVIDUAL ON-SITE PRIVATE SEWAGE DISP INSTALL (SEPTIC) BC 1704.2201 - CLASS 1 RC1038 SPRINKLER SYSTEMS BC 1704.2301 - CLASS 1 RC1039 STANDPIPE SYSTEMS BC 1704.2401 - CLASS 1 RC1040 HEATING SYSTEMS BC 1704.2501 - CLASS 1 RC1041 CHIMNEYS BC 1704.2601 - CLASS 1 RC1042 FIRE-RESISTANT PENETRATIONS AND JOINTS (FIRESTOP) BC 1704.2701 - CLASS 1 RC1043 ALUMINUM WELDING BC 1704.2801 - CLASS 1 RC1044 SEISMIC ISOLATION SYSTEMS BC 1707.802 - CLASS 2 RC1047 RAISING AND MOVING OF A BUILDING BC 1704.20.501 - CLASS 1 RC1048 STRUCTURAL STEEL - DETAILS BC 1704.3.201 - CLASS 1 RC1049 HELICAL PILES BC 1704.8.501 - CLASS 1 RC1050 MASTIC AND INTUMESCENT FIRE-RESISTANT COATINGS BC 1704.1201 - CLASS 1 RC1051 HIGH TEMPERATURE HOT WATER PIPING (WELDING) BC 1704.1801 - CLASS 1 RC1052 POST-INSTALLED ANCHORS BC 1704.32

If you have any questions please review these Frequently Asked Questions, the Glossary, or call the 311 Citizen Service Center by dialing 311 or (212) NEW YORK outside of New York City.

Page 2 of 2License Details

9/17/2015file:///Z:/011%20AEIS%20Certificates/NYC%20DOB/License%20Details.html

(see attached scope of accreditation for field(s) of inspection, including type, range, methods or procedures) Print Date: 8/20/2015 Page 1 of 4

This is to signify that

AEIS, LLC. 943 EAST HAZELWOOD AVENUE

RAHWAY, NEW JERSEY 07065-5633

Special Inspection Agency SIA-222-NY

has demonstrated compliance with the IAS Accreditation Criteria for Special Inspection Agencies (AC291), (with the exception that Section 6 of AC291 is replaced by Rules of City of New York, 1RCNY 101-06, Appendix A, 2014 New York City Building Code

® Chapter 17, Section BC 1704), and has been accredited commencing May 5, 2015, for a one-year period, to provide inspection services within the approved scope of accreditation. The agency identified in this certificate has demonstrated that it has the competence to provide inspections during construction for the types of inspections identified in the Scope of Accreditation. Patrick V. McCullen C. P. Ramani, P.E. Vice President, Chief Technical Officer President

AEIS, LLC. SIA-222-NY

May 5, 2015 Commencement Date C. P. Ramani, P.E. President Print Date: 8/20/2015 Page 2 of 4

SIA Owner: Puja Goel SIA Director: Manan Shah, P.E AEIS, LLC. Technical Director 943 E. Hazelwood Ave. (732) 388-7711 Rahway, NJ 07065

FIELD AND TYPES OF

INSPECTION INSPECTION PROCEDURES AND

REFERENCE DOCUMENTS General Building Construction:

Wall Panels, Curtain Walls and Veneers Exterior Insulation Finish Systems (EIFS) Chimneys Flood Zone Compliance Luminous Egress Path Markings

Quality Management Manual, Rev. 3, 12/5/2014 for NYC BC Sections: 1704.10 1704.13 1704.26 1704.29, G 105 1704.30,1024.8

Fire Protection Systems and Fire-Resistant Construction

Sprayed Fire-resistant Materials Mastic and Intumescent Fire resistant Coatings Sprinkler Systems Standpipe Systems Fire-resistant Penetrations and Joints Emergency and Standby Power Systems (Generators)

Quality Management Manual, Rev. 3, 12/5/2014 for NYC BC Sections: 1704.11 1704.12 1704.23 1704.24 1704.27 1704.31

AEIS, LLC. SIA-222-NY

May 5, 2015 Commencement Date C. P. Ramani, P.E. President Print Date: 8/20/2015 Page 3 of 4

FIELD AND TYPES OF

INSPECTION INSPECTION PROCEDURES AND

REFERENCE DOCUMENTS Plumbing and Mechanical Systems:

Mechanical Systems Fuel-Oil Storage and Fuel Oil Piping Systems. Heating Systems

Quality Management Manual, Rev. 3, 12/5/2014 for NYC BC Sections: 1704.16 1704.17 1704.25

Structural Materials and Construction Operations:

Structural Steel Welding Structural Steel Details Structural Steel High Strength Bolting Structural Cold-formed Steel High pressure Steam Piping High temperature Hot Water Piping( Welding) High pressure Fuel Gas piping ( Welding) Aluminum Welding Non Destructive Test Inspection

Ultrasonic Inspection Magnetic Particle Inspection Radiographic Examination Liquid Dye Penetrant Inspection

Quality Management Manual, Rev. 3, 12/5/2014 for NYC BC Sections: 1704.3.1 1704.3.2 1704.3.3 1704.3.4 1704.18 1704.18 1704.19 1704.28 1704.3.1 1704.3.1 1704.3.1 1704.3.1 1704.3.3

AEIS, LLC. SIA-222-NY

May 5, 2015 Commencement Date C. P. Ramani, P.E. President Print Date: 8/20/2015 Page 4 of 4

FIELD AND TYPES OF

INSPECTION INSPECTION PROCEDURES AND

REFERENCE DOCUMENTS Structural Materials and Construction Operations: (continued) Concrete – Cast-in-place Concrete Precast Masonry Subgrade Inspection Subsurface Conditions- Fill placement and In Place Density Subsurface Investigations ( Boring/Test Pits) Deep Foundation Elements Helical Piles Vertical Masonry Foundation Elements Underpinning Structural Stability-Existing Buildings Excavations - Sheeting, Shoring, and Bracing Post–installed Anchors ( BB#2014-018, 2014-019)

Quality Management Manual, Rev. 3, 12/5/2014 for NYC BC Sections: 1704.4 1704.4 1704.5 1704.7.1 1704.7.2, 1704.7.3 1704.7.4 1704.8 1704.8.5 1704.9 1704.20.3,1814 1704.20.1 1704.20.2 1704.32

Others (Optional) (Progress Inspections)

See 1RCNY 101-07 (c )(3)iii)

Fire-Resistance Rated Construction

Quality Management Manual, Rev. 3, 12/5/2014 for NYC BC Sections: 110.3.4

NOTE: Corresponding 2008 NYCBC Sections applies for each category of Special Inspection (See BB 2014-015 and 2014-017)

American Association of State Highway and Transportation Officials

AASHTO Accreditation Program Certificate of Accreditation

This is to signify that

AEIS, LLC in

Rahway, New Jersey

has demonstrated proficiency for the testing of construction materials and has conformed to the minimum requirements established in AASHTO R 18 set forth by the AASHTO Highway Subcommittee on Materials (HSOM).

The scope of accreditation can be viewed on the AAP Directory of

Accredited Laboratories on www.amrl.net.

Bud Wright, Executive Director Moe Jamshidi, AASHTO HSOM Chair

David Samson Chairman

tHE PORT AIRHORRY OF NY & NJ

Office of Business Diversity and Civil Rights

Certificate PA-31719

Patrick J. Foye Executive Director

JlP,IS d6aJltfas P,va[uation d Inspection Services

is certified as a MinoritylWoman-owned Business Enterprise and has met the criteria for ownership and control as established by the Port Authority.

This certification will remain in effect for five years from the date of notice and may be extended only upon your submission and the Port Authority's acceptance of a recertification package attesting that the ownership and control of the business, on which this certification is granted, has not changed. Please reference the above number on all correspondence.

;i1~~ Lash Green

~J:u I )4~

Fonn: 6/10/93

Atlas Evaluation & Inspection Services 943 E Hazelwood Ave, Rahway, NJ 07065 Ph: 732–388-7711 Fax: 732–388-7767 Website: www.aeis.com

Organizational Chart

Puja GoelPresident[SUB: VP]

Nagesh GoelVice President

Facility RepresentativeTQM: SSPC QP5

[SUB: QM, TD, TQM, LM, ISM, DIS]

Jagdish BhatiaQuality Manager

Elizabeth Mattfield, P.E.Technical Director

[PI-GEO/ SOI/ STR/ CNR/ MAS/ SSW/ GEN/ PRG/ MIS][SUB: QM, TQM, DIS]

Mamdouh ShohdyLaboratory Manager

[S LAB, C LAB]

SUB: SubstituteP: PresidentVP: Vice PresidentTD: Technical DirectorQM: Quality ManagerTQM: Technical Quality Manager [SSPC QP5]LM: Laboratory ManagerISM: Inspection Services ManagerDIS: Dispatch ManagerPI - Principal Inspector

QMS Exhibit1: AEIS Organization Chart – SIA and Construction Material Lab

Rev 18: Effective 2016.10.17

Manan Shah, P.E.Technical Director

[PI-GEO/ SOI/ STR/ CNR/ MAS/ SSW/ FPR/ GEN/ PRG/ ASP/ MIS]

[SUB: QM, DIS]

Maggie McKennaDispatch Manager

C Laboratory Team Inspection Services TeamAll Disciplines

DEPARTMENTS

SPECIAL INSPECTION AGENCY SERVICES (SIA)GEO: Subsurface/ Geotechnical InvestigationsSOI: SoilsSTR: Structural InspectionsCNR: ConcreteMAS: MasonrySSW: Structural Steel and WeldingFPR: Fire Protection Systems & Fire-Resistant ConstructionPMC: Plumbing and Mechanical SystemsELE: Electrical System InspectionsGEN: General Building ConstructionWOD: Wood Inspections/ Field TestsPRG: Progress InspectionsASP: AsphaltMIS: Miscellaneous/ Special Inspections and Field Tests

CONSTRUCTION MATERIALS LAB (CLAB)SOI: SoilsCNR: ConcreteMAS: MasonryAGR: AggregateASP: AsphaltWOD: WoodFPR: Fire Code

ENGINEERING LAB (SLAB)WTST: Weld Testing ServicesQUAL: Welder/ Welding Operator Qualification Test ServicesNDT: Non Destructive Testing LaboratoryMECH: Mechanical LabCHEM: ChemicalMETL: MetallurgicalCORR: CorrosionFAM: Failure Analysis and ModellingCAL: Calibration Laboratory ServicesPROD: Product TestingNAFS: Fenestration TestingMISC: Miscellaneous Laboratory Services

NON DESTRUCTIVE TESTING SERVICES (NDTS)NDT: METALS AND COMPOSITES NDTSSC: SUB-SURFACE AND CONCRETE NDTCOAT: COATING INSPECTIONS (QP5)

CONSULTATION SERVICES (CNS)WELD: Welding Consultation ServicesNDT: NDT Consultation ServicesAUD: Audit Consultation Services

ENGINEERING TECHNICAL TRAINING SERVICES (INDT)EInFo: Engineering Information CoursesLNL: Lunch and Learn CoursesNDT: Non Destructive Testing CoursesEXP: Exam Preparation Courses

Herb Goldenberg, P.E.Senior Technical Director

[PI-STR/ SSW/ FPR/ PMC/ ELE/ GEN/ PRG/ MIS]

[SUB: QM, TQM]

Jorge ZavaletaSupport and

Logistics

Viraj PavthawalaAssistant Quality

Manager

Andrew Szulczewski, P.E.Technical Director

[TD: C-LAB][SUB: QM, DIS]

Nagesh GoelTraining Manager

Andrew Szulczewski, P.E.Technical Director

[PI-GEO/ SOI/ STR/ CNR/ MAS/ SSW/ FPR/ GEN/ WOD/ PRG/ ASP/ MIS]

[SUB: QM, DIS]