TM series TM series - Tecmaco...The TM-ZE360/300 series, with a lifting capacity of 3.03 tons, and a choice of 4 different lengths of the boom are available to meet your lifting solutions

TRUCK LOADER CRANETRUCK LOADER CRANE

TM seriesTM series

TRUCK LOADER CRANE

STRONGER AND LIGHTER BOOMTadano’s unique pentagonal boom is made of high-tensile steel and a section of boom is structure of bended one piece steel plate for lighter boom weight and powerful lifting capability.Special valves enable smooth boom extension and retraction for smoother operation to reduce a shock when telescoping the boom.

The undercoating of the crane is done by Cationic Electro-deposition coating. Soaking each materials and even the narrow inner booms and frames are thoroughly undercoated.

Installed on both sides of the slewing post is the centralized control panel where operating switches and the lifting chart needed for crane operation are grouped together and arranged on a single panel.

CENTRALIZED CONTROL PANEL

The advantages from the enlarged winch drum and plunger motor are evident during start-up when maximum power is required. Re-hoisting with a load on the hook can also be handled with ease.The winch reduction gear comes equipped with a failsafe automatic brake.From the pitch of the drum grooves to the fitting of the guide sheave, cable winding has been improved in every detail so as to prevent the cable from winding off position.

GREATER WINCH

Equipped with an optimally matched, high-performance control valve, the operating levers provide improved responsiveness and fine-tuned control. Operation is fast or slow in accordance with operator’s command.The stainless rods between left and right operation levers are provided as standard.

RESPONDING TO OPERATOR’ S COMMAND

Tadano's Equalizer Crane Support protects the truck frame from stress. The crane is mounted to the truck chassis with the Equalizer Crane Support that evenly distributes the load to prevent excessive stress concentration at any one point.

THREE-POINT SUPPORT SYSTEM (Equalizer Crane Support)

The newly designed compact slewing post improves performance providing FULL CIRCLE, continuous rotation for more efficient operations.AUTOMATIC SLEWING LOCK: The boom is mechanically locked at the slewing post base which prevents boom rotation during vehicle travel.

FULL CIRCLE, CONTINUOUS SLEWING

LOAD METER

LEVEL GAUGENEW LOCK SYSTEM

LEFT-HAND SIDE RIGHT-HAND SIDE

The outrigger beams can be easily operated, using a grip to lock or release and extend or retract.Further more safety, new lock system prevents the outrigger from extending during vehicle travel.A level gauge is provided as standard equipment.

QUICKER WORK WITH OUTRIGGER MECHANISM

photo: TM-ZE364MH

The ZE features all the Tadano Cargo Crane technology

that is recognized the world over.

The key development concepts remain:

EXCELLENT QUALITY,

EASY OPERATION AND EASY MAINTENANCE.

The TM-ZE360/300 series, with a lifting capacity of 3.03

tons, and a choice of 4 different lengths of the boom are

available to meet your lifting solutions.

IDEAL Cargo Crane, TADANO ZE CATIONIC ELECTRO-DEPOSITION COATING

5 m 10 m

3,030 kg at 1.5 m

3,030 kg at 1.5 m

3,030 kg at 1.4 m

3,030 kg at 1.4 m

Max. load

TM-ZE293MH

TM-ZE294MH

TM-ZE295MH

TM-ZE296MH

3,030 kg at 1.5 m 3,030 kg at 1.5 m 3,030 kg at 1.5 m

TM-ZE293MHTM-ZE293MH







17

16

15

14

13

12

11

10

9

8

7

6

5

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Lifti

ng h

eigh

t (m

)

Load radius (m)

TM-ZE296MH 12.8-m BOOM


TM-ZE294MH 8.9-m BO

OM

TM-ZE293MH 6.6-m B

OO

M

76˚ 70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚

MODEL TM-ZE293MH TM-ZE294MH TM-ZE295MH TM-ZE296MH

CRANE CAPACITY 3,030 kg at 1.5 m 3,030 kg at 1.5 m 3,030 kg at 1.4 m 3,030 kg at 1.4 m (4-part lines) (4-part lines) (4-part lines) (4-part lines)BOOM Fully powered telescoping boom of pentagonal box construction. Sections 3 4 5 6 Length 2.85 m - 6.6 m 3.17 m - 8.9 m 3.13 m - 10.8 m 3.23 m - 12.8 m Extending speed 3.75 m / 10.5 s 5.73 m / 13 s 7.67 m / 15.5 s 9.57 m / 17 s Elevation range/speed 1˚ to 76˚ / 6 s Max. lifting height* Approx. 7.8 m* Approx. 10.0 m* Approx. 11.8 m* Approx. 13.8 m* Max. load radius* 6.4 m* 8.7 m* 10.6 m* 12.6 m* WINCH Hydraulic motor driven. Spur gear speed reduction, provided with mechanical brake. Max. single line pull 7.45 kN {760 kgf} Max. single line speed 68 m/min. (at 4th layer) Wire rope (Diameter x length) 8 mm x 45 m 8 mm x 56 m 8 mm x 66 m 8 mm x 75 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm} OUTRIGGERS Manually extended sliders and hydraulically extended jacks Integral with crane frame Power up and down Extended width Max. : 3.4 m, Mid. : 2.9 m / 2.4m, Min. : 1.72 m HYDRAULIC SYSTEM Control valves Multiple control valves with integral safety valvesSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hoisting limiter •P.T.O. indicator lamp •Hook safety latch •Hydraulic safety valves •Level gauge SUITABLE TRUCKS Gross vehicle mass (including crane mass) 4,500 to 8,000 kg

TECHNICAL SPECIFICATIONS NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 53 L/min.2. * No allowance made for boom deflection under laden conditions.RATED LIFTING CAPACITIES NOTE:The mass of hook (30 kg), slings and all similarly used load handling devices must be added to the mass of the load.

NOTE: Lifting heights and boom angles are based on a straight (unladen) boom, and allowance should be made for boom deflection obtaind under laden conditions.

HOOK INThe TM-ZE290MH feature the "Hook-In" system to further enhance work efficiency. A pull of a lever and the crane hook is stowed automatically. No more manual belaying.

Table A Table D

Table C

TM-ZE293MH

• 2.85m/4.74-m boom Load radius (m) 1.5 2.0 2.5 3.0 3.5 4.0 4.54 Rated lifting capacity (kg) 3,030 2,280 1,730 1,230 930 730 630

• 6.6-m boom Load radius (m) 2.2 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.4 Rated lifting capacity (kg) 1,880 1,630 1,230 930 730 580 480 430 380 350

TM-ZE294MH

• 3.17m/5.12-m boom Load radius (m) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 4.92 Rated lifting capacity (kg) 3,030 2,280 1,730 1,180 880 680 580 530


• 8.9-m boom Load radius (m) 3.0 3.5 4.0 5.0 6.0 7.0 8.0 8.7 Rated lifting capacity (kg) 980 830 680 450 350 280 230 200

TM-ZE293MH

• 2.85m/4.74-m boom Load radius (m) 1.5 2.0 2.5 3.0 3.5 4.0 4.54 Rated lifting capacity (kg) 3,030 2,330 1,880 1,500 1,250 1,080 980

• 6.6-m boom Load radius (m) 2.2 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.4 Rated lifting capacity (kg) 1,880 1,680 1,430 1,230 1,080 950 830 730 650 580

TM-ZE294MH

• 3.17m/5.12-m boom Load radius (m) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 4.92 Rated lifting capacity (kg) 3,030 2,330 1,880 1,500 1,250 1,080 930 850


• 8.9-m boom Load radius (m) 3.0 3.5 4.0 5.0 6.0 7.0 8.0 8.7 Rated lifting capacity (kg) 1,030 930 830 680 580 480 400 350

TM-ZE293MH

• 2.85m/4.74-m boom Load radius (m) 1.5 2.0 2.5 3.0 3.5 4.0 4.54 Rated lifting capacity (kg) 3,030 2,280 1,830 1,430 1,080 830 730

• 6.6-m boom Load radius (m) 2.2 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.4 Rated lifting capacity (kg) 1,880 1,630 1,330 1,030 830 680 580 530 480 430

TM-ZE294MH

• 3.17m/5.12-m boom Load radius (m) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 4.92 Rated lifting capacity (kg) 3,030 2,280 1,830 1,380 1,030 830 680 580



TM-ZE295MH

• 3.13m/5.07-m boom Load radius (m) 1.4 2.0 2.5 3.0 3.5 4.0 4.5 4.87 Rated lifting capacity (kg) 3,030 2,130 1,730 1,330 980 780 630 550



• 10.8-m boom Load radius (m) 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.6 Rated lifting capacity (kg) 480 430 380 300 260 230 200 180 150

TM-ZE296MH



• 9.0-m boom Load radius (m) 3.0 3.5 4.0 5.0 6.0 7.0 8.0 8.8Rated lifting capacity (kg) 930 830 730 580 480 380 280 230



TM-ZE295MH





TM-ZE296MH






and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

and below

Maximum 3,400 mmRATED LIFTING CAPACITIES - Empty Chassis

WORKING RANGE

TECHNICAL SPECIFICATIONS

TM-ZE290 series

PARABOX OUTRIGGER (TM-ZE290 series)




Except 6 section boomThe cables and sheaves are all internal - for a clean, clutter - free appearance.

TM-ZE294MH

Table A

Table D

Table CTM-ZE303MH


• 7.71-m boom Load radius (m) 2.7 3.2 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 Rated lifting capacity (kg) 2,330 1,650 1,380 1,080 880 730 630 580 530 480 430

TM-ZE304MH



• 10.0-m boom Load radius (m) 4.0 5.0 6.0 7.0 8.0 9.0 9.8 Rated lifting capacity (kg) 1,030 730 530 430 330 280 250

TM-ZE305MH





TM-ZE306MH

• 3.65m/5.87-m boom Load radius (m) 2.3 2.5 3.0 3.5 4.0 4.5 5.0 5.67Rated lifting capacity (kg) 3,030 2,780 1,880 1,330 980 830 680 580

• 8.07-m boom Load radius (m) 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.87Rated lifting capacity (kg) 2,230 1,830 1,330 980 830 680 550 480 400 330 280

• 10.2-m boom Load radius (m) 3.9 5.0 6.0 7.0 8.0 9.0 10.05Rated lifting capacity (kg) 1,030 650 480 330 280 230 180


• 14.6-m boom Load radius (m) 4.9 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.4Rated lifting capacity (kg) 330 280 250 230 180 150 130 100 80 50

TM-ZE303MH

• 3.28m/5.51-m boom Load radius (m) 2.5 3.0 3.5 4.0 4.5 5.0 5.3 Rated lifting capacity (kg) 3,030 2,580 2,180 1,880 1,680 1,480 1,380

• 7.71-m boom Load radius (m) 2.7 3.2 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 Rated lifting capacity (kg) 2,330 2,030 1,830 1,630 1,480 1,330 1,230 1,130 1,050 980 930

TM-ZE304MH




TM-ZE303MH


• 7.71-m boom Load radius (m) 2.7 3.2 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 Rated lifting capacity (kg) 2,330 1,880 1,580 1,250 1,030 880 730 660 580 540 500

TM-ZE304MH

• 3.34m/5.57-m boom Load radius (m) 2.5 3.0 3.5 4.0 4.5 5.0 5.37 Rated lifting capacity (kg) 3,030 2,080 1,580 1,230 980 830 780



TM-ZE305MH





TM-ZE306MH





• 14.6-m boom Load radius (m) 4.9 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.4 Rated lifting capacity (kg) 330 280 250 230 210 190 170 130 130 80

TM-ZE305MH

• 3.52m/5.75-m boom Load radius (m) 2.3 2.5 3.0 3.5 4.0 4.5 5.0 5.55 Rated lifting capacity (kg) 3,030 2,830 2,430 2,030 1,730 1,480 1,330 1,150

• 7.95-m boom Load radius (m) 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.00 6.5 7.0 7.75 Rated lifting capacity (kg) 2,330 2,130 1,830 1,630 1,480 1,330 1,150 1,050 950 850 730



TM-ZE306MH

• 3.65m/5.87-m boom Load radius (m) 2.3 2.5 3.0 3.5 4.0 4.5 5.0 5.67 Rated lifting capacity (kg) 3,030 2,830 2,380 1,980 1,680 1,450 1.280 1,080





andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

5 m 10 m 15 m

3,030 kg at 2.5 m

3,030 kg at 2.5 m

3,030 kg at 2.3 m

3,030 kg at 2.3 m


TM-ZE303MH

TM-ZE304MH

TM-ZE305MH

TM-ZE306MH

TM-ZE304MH


Lifti

ng h

eigh

t (m

)

Load radius (m)

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

TM-ZE306MH 14.6-m BOOM TM-ZE305MH 12.3-m BOOM


TM-ZE303MH 7.71-m BO

OM

78˚ 70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚

WORKING RANGE

NOTE:Lifting heights and boom angles are based on a straight (unladen) boom, and allowance should be made for boom deflection obtaind under laden conditions.

TECHNICAL SPECIFICATIONS NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60 L/min.2. * No allowance made for boom deflection under laden conditions.RATED LIFTING CAPACITIES NOTE:The mass of hook (30 kg), slings and all similarly used load handling devices must be added to the mass of the load.

RATED LIFTING CAPACITIES - Empty Chassis

TM-ZE300 series

Max. load


CRANE CAPACITY 3,030 kg at 2.5 m 3,030 kg at 2.5 m 3,030 kg at 2.3 m 3,030 kg at 2.3 m (4-part lines) (4-part lines) (4-part lines) (4-part lines)BOOM Fully powered telescoping boom of pentagonal box construction. Sections 3 4 5 6 Length 3.28 m - 7.71 m 3.34 m - 10.0 m 3.52 m - 12.3 m 3.65 m - 14.6 m Extending speed 4.43 m / 12 s 6.66 m / 14 s 8.78 m / 18 s 10.95 m / 19 s Elevation range/speed 1˚ to 78˚ / 7.5 s Max. lifting height* Approx. 9.2 m* Approx. 11.4 m* Approx. 13.7 m* Approx. 15.9 m* Max. load radius* 7.5 m* 9.8 m* 12.1 m* 14.4 m* WINCH Hydraulic motor driven. Spur gear speed reduction, provided with mechanical brake. Max. single line pull 7.45 kN {760 kgf} Max. single line speed 76 m/min. (at 4th layer) Wire rope (Diameter x length) 8 mm x 51 m 8 mm x 63 m 8 mm x 74 m 8 mm x 85 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm} OUTRIGGERS Manually extended sliders and hydraulically extended jacks Integral with crane frame Power up and down Extended width Max. : 3.4 m Mid. : 2.7 m Min. : 2.0 m HYDRAULIC SYSTEM Control valves Multiple control valves with integral safety valvesSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hoisting limiter •P.T.O. indicator lamp •Hook safety latch •Hydraulic safety valves •Level gauge SUITABLE TRUCKS Gross vehicle mass (including crane mass) 8,000 to 14,500 kg

Maximum 3,400 mm


5 m 10 m 15 mTM-ZE363MH

TM-ZE364MH

TM-ZE365MH

TM-ZE366MH


CRANE CAPACITY 3,030 kg at 2.6 m 3,030 kg at 2.5 m 3,030 kg at 2.3 m 3,030 kg at 2.3 m (4-part lines) (4-part lines) (4-part lines) (4-part lines)BOOM Fully powered telescoping boom of pentagonal box construction. Sections 3 4 5 6 Length 3.28 m - 7.71 m 3.34 m - 10.0 m 3.52 m - 12.3 m 3.65 m - 14.6 m Extending speed 4.43 m / 12 s 6.66 m / 14 s 8.78 m / 18 s 10.95 m / 19 s Elevation range/speed 1˚ to 78˚ / 7.5 s Max. lifting height Approx. 9.2 m Approx. 11.4 m Approx. 13.7 m Approx. 15.9 m Max. load radius 7.5 m 9.8 m 12.1 m 14.4 m WINCH Hydraulic motor driven. Spur gear speed reduction, provided with mechanical brake. Max. single line pull 7.45 kN {760 kgf} Max. single line speed 76 m/min. (at 4th layer) Wire rope (Diameter x length) 8 mm x 51 m 8 mm x 63 m 8 mm x 74 m 8 mm x 85 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle swing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm} OUTRIGGERS Manually extended sliders and hydraulically extended jacks Integral with crane frame Power up and down Extended width Max.: 4.2 m, Mid.: 3.4 m / 2.7 m, Min.: 2.0 m HYDRAULIC SYSTEM Control valves Multiple control valves with integral safety valveSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hoisting limiter •P.T.O. indicator lamp •Hook safety latch •Hydraulic safety valves •Level gauge SUITABLE TRUCKS Gross vehicle mass (including crane mass) 8,000 to 15,000 kg

TECHNICAL SPECIFICATIONS NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60 L/min.2. *No allowance made for boom deflection under laden conditions.RATED LIFTING CAPACITIES NOTE:The mass of hook (30 kg), slings and all similarly used load handling devices must be added to the mass of the load.


3,030 kg at 2.6 m

3,030 kg at 2.5 m

3,030 kg at 2.3 m

3,030 kg at 2.3 m

Max. load


TM-ZE364MH

Table A

Table D

Table CTM-ZE363MH

• 3.28m/5.51-m boom Load radius (m) 2.6 3.0 3.5 4.0 4.5 5.0 5.3 Rated lifting capacity (kg) 3,030 2,480 1,930 1,480 1,230 1,030 980


TM-ZE364MH




TM-ZE365MH




• 12.3-m boom Load radius (m 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.1 Rated lifting capacity (kg) 760 630 480 400 350 310 280 250 230

TM-ZE366MH






TM-ZE363MH



TM-ZE364MH




TM-ZE363MH

• 3.28m/5.51-m boom Load radius (m) 2.6 3.0 3.5 4.0 4.5 5.0 5.3Rated lifting capacity (kg) 3,030 2,480 2,030 1,730 1,430 1,180 1,080

• 7.71-m boom Load radius (m) 2.7 3.2 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 Rated lifting capacity (kg) 2,330 2,030 1,780 1,480 1,280 1,130 1,030 880 780 700 650

TM-ZE364MH


• 7.78-m boom Load radius (m) 2.7 3.2 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.58 Rated lifting capacity (kg) 2,330 2,030 1,730 1,430 1,230 1,080 980 830 730 650 600


TM-ZE365MH

• 3.52m/5.75-m boom Load radius (m) 2.3 2.5 3.0 3.5 4.0 4.5 5.0 5.55 Rated lifting capacity (kg) 3,030 2,780 2,280 1,930 1,630 1,330 1,080 930




TM-ZE366MH

• 3.65m/5.87-m boom Load radius (m) 2.3 2.5 3.0 3.5 4.0 4.5 5.0 5.67 Rated lifting capacity (kg) 3,030 2,780 2,280 1,930 1,630 1,330 1,080 880





TM-ZE365MH





TM-ZE366MH






andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

andbelow

PARABOX OUTRIGGER (TM-ZE360 series)

Maximum 4,200 mm

RATED LIFTING CAPACITIES - Empty Chassis

Lifti

ng h

eigh

t (m

)

Load radius (m)

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16



TM-ZE364MH 10.0-m BO

OM

TM-ZE363MH 7.71-m B

OO

M

78˚ 70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚

NOTE:Lifting heights and boom angles are based on a straight (unladen) boom, and allowance should be made for boom deflection obtaind under laden conditions.

WORKING RANGE TECHNICAL SPECIFICATIONS

TM-ZE360 series

The boom is locked securely to prevent accidental boom slewing out during driving.

FULL CIRCLE, CONTINUOUS SLEWING

QUICKER WORK WITH OUTRIGGER MECHANISM

AUTOMATIC SWING LOCK SYSTEM

NEW LOCK SYSTEM

The newly designed compact slewing post improves performance providing FULL CIRCLE, continuous rotation for more efficient operations.AUTOMATIC SLEWING LOCK: The boom is mechanically locked at the slewing post base which prevents boom rotation during vehicle travel.

The equalizer crane support system protects the chassis frame by evenly distributing the load applied to the frame during vehicle travel to prevent excessive stress concentration at any one point.

The outrigger beams can be easily operated, by a finger to lock or release and extend or retract.Further more safety, new lock system prevents the outrigger from extending during vehicle travel.A level gauge is provided as standard equipment. NEW LOCK SYSTEM

to lock or release

THREE-POINT SUPPORT SYSTEM (Equalizer Crane Support)

HOOK IN (TM-ZT500H, TM-ZT820H only)

BIGGER HYDRAULIC TANK

The TM-ZT500MH and TM-ZT820H feature the "Hook-In" system to further enhance work efficiency. A pull of a lever and the crane hook is stowed automatically. No more manual belaying.

OPERATING LEVER OF THE HORIZONTAL

New Cargo Crane TM-ZT Series

SPEEDY AND POWERFUL

WORKING RANGE

RATED LIFTING CAPACITIES NOTE:The mass of hook (30 kg), slings and all similarly used load handling devices must be added to the mass of the load.

Lifti

ng h

eigh

t (m

)

Load radius (m)0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

19

18

17

16

15

14

13

12

11

10

9

8

7

6

78˚70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚

TM-ZT404 10.8-m BOOM



WORKING RANGE


TM-ZT500 series

RATED LIFTING CAPACITIESCrane strength rated capacities


TECHNICAL SPECIFICATION NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60 L/min.2. ** No allowance included for boom deflection under loaded conditions.

* HOOK STOWING DEVICE. Mechanically stowed beneath boom top portion.

Lifti

ng h

eigh

t (m

)

Load radius (m)0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

19

18

17

16

15

14

13

12

11

10

9

8

7

6

78˚70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚




MODEL TM-ZT503 TM-ZT503H* TM-ZT504 TM-ZT504H* TM-ZT505 TM-ZT505H*CRANE CAPACITY 5,050 kg at 2.35 m (5-part lines) 5,050 kg at 2.25 m (5-part lines) BOOM Fully hydraulic telescoping boom of Fully powered partly synchronized telescoping boom of pentagonal box construction pentagonal box construction Sections 3 4 5 Length 3.47 m-8.31 m 3.55 m-10.8 m 3.77 m-13.34 m Extending speed 4.84 m / 18 s 7.25 m / 21 s 9.57 m / 25 s Elevation range/speed 1˚ to 78˚ / 12 s Max. lifting height** Approx. 10.2 m** Approx. 12.7 m** Approx. 15.2 m** Max. load radius** 8.09 m** 10.58 m** 13.12 m**WINCH Hydraulic motor driven. Hydraulic motor driven. Spur gear Spur gear speed reduction, speed reduction, provided with provided with mechanical brake. mechanical brake and cable follower. Max. Single line pull 9.90 kN {1,010 kgf} Max. Single line speed 66 m/min. (at 4th layer) Wire rope (Diameter x length) 8 mm x 67 m 8 mm x 82 m 8 mm x 97 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm}OUTRIGGERS Manually extended sliders and hydraulically extended jacks. Integral with crane frame. Power up and down. Extended width Max. : 3.8 m Mid. : 3.0 m Min. : 2.20 mHYDRAULIC SYSTEM Pump Single gear pump Control valves Multiple control valves with integral safety valveSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hoisting limiter** •Hook safety latch •Level gauge •Hydraulic safety valves, check valves and holding valvesSUITABLE TRUCKS Gross vehicle mass 12,000 kg or more

TM-ZT400 series


TM-ZT405

TM-ZT404

TM-ZT403

TECHNICAL SPECIFICATIONSMODEL TM-ZT403 TM-ZT404 TM-ZT405

TECHNICAL SPECIFICATION NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60 L/min.2. * No allowance included for boom deflection under loaded conditions.

NOTE:Lifting heights and boom angles are based on a straight (unloaded) boom, and allowance should be made for boom deflection under loaded conditions.

• 3.47/5.91-m boomLoad radius (m) 2.95 3.8 4.1 4.5 5.0 5.69Rated lifting capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,950• 8.31-m boomLoad radius (m) 3.8 4.1 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.09Rated lifting capacity (kg) 3,130 2,930 2,580 2,280 2,030 1,830 1,680 1,550 1,430 1,280

andbelow

andbelow

• 3.55m/5.99-m boomLoad radius (m) 2.95 3.8 4.1 4.5 5.0 5.77Rated lifting capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,900• 8.39-m boomLoad radius (m) 3.8 4.1 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.17Rated lifting capacity (kg) 3,130 2,930 2,580 2,280 2,030 1,830 1,680 1,550 1,430 1,280• 10.8-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.58Rated lifting capacity (kg) 2,030 1,830 1,480 1,230 1,080 980 880 830

andbelow

andbelow

andbelow

• 3.77m/6.21-m boomLoad radius (m) 2.85 3.6 3.9 4.5 5.0 5.5 5.99Rated lifting capacity (kg) 4,050 3,180 2,930 2,430 2,130 1,880 1,650• 8.59-m boomLoad radius (m) 3.6 3.9 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.37Rated lifting capacity (kg) 3,130 2,930 2,430 2,130 1,880 1,650 1,480 1,350 1,230 1,080• 10.97-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.75Rated lifting capacity (kg) 2,030 1,830 1,480 1,230 1,030 880 780 730• 13.34-m boomLoad radius (m) 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.12Rated lifting capacity (kg) 1,330 1,100 950 830 730 650 600 550 500

andbelow

andbelow

andbelow

andbelow

CRANE CAPACITY 4,050 kg at 2.95 m (4-part lines) 4,050 kg at 2.85 m (4-part lines) BOOM Fully hydraulic telescoping boom of Fully powered partly synchronized telescoping boom of pentagonal box construction pentagonal box construction Sections 3 4 5 Length 3.47 m-8.31 m 3.55 m-10.8 m 3.77 m-13.34 m Extending speed 4.84 m / 18 s 7.25 m / 21 s 9.57 m / 25 s Elevation range/speed 1˚ to 78˚ / 12 s Max. lifting height* Approx. 10.2 m* Approx. 12.7 m* Approx. 15.2 m* Max. load radius* 8.09 m* 10.58 m* 13.12 m*WINCH Hydraulic motor driven. Hydraulic motor driven. Spur gear Spur gear speed reduction, speed reduction, provided with provided with mechanical brake. mechanical brake and cable follower. Max. single line pull 9.92 kN {1,012 kgf} Max. single line speed 66 m/min. (at 4th layer) Wire rope (Diameter x length) 8 mm x 56 m 8 mm x 69 m 8 mm x 81 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm}OUTRIGGERS Manually extended sliders and hydraulically extended jacks. Integral with crane frame. Power up and down. Extended width Max. : 3.8 m Mid. : 3.0 m Min. : 2.20 mHYDRAULIC SYSTEM Pump Single gear pump Control valves Multiple control valves with integral safety valvesSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hook safety latch •Level gauge •Hydraulic safety valves, check valves and holding valvesSUITABLE TRUCKS Gross vehicle mass 12,000 kg or more


• 3.77-m boomLoad radius (m) 2.25 2.85 3.55

Rated lifting capacity (kg) 5,050 4,050 3,230

• 6.21-m boomLoad radius (m) 2.85 3.6 3.9 4.5 5.0 5.5 5.99

Rated lifting capacity (kg) 4,050 3,180 2,930 2,430 2,130 1,880 1,650

• 8.59-m boomLoad radius (m) 3.6 3.9 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.37

Rated lifting capacity (kg) 3,130 2,930 2,430 2,130 1,880 1,650 1,480 1,350 1,230 1,080

• 10.97-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.75

Rated lifting capacity (kg) 2,030 1,830 1,480 1,230 1,030 880 780 730

• 13.34-m boomLoad radius (m) 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.12

Rated lifting capacity (kg) 1,330 1,100 950 830 730 650 600 550 500

andbelow

andbelow

andbelow

andbelow

andbelow

TM-ZT505

TM-ZT504

TM-ZT503 • 3.47-m boomLoad radius (m) 2.35 2.95 3.25


• 5.91-m boomLoad radius (m) 2.95 3.8 4.1 4.5 5.0 5.69

Rated lifting capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,950



andbelow

andbelow

andbelow

• 3.55-m boomLoad radius (m) 2.35 2.95 3.33


• 5.99-m boomLoad radius (m) 2.95 3.8 4.1 4.5 5.0 5.77

Rated lifting capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,900



• 10.8-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.58

Rated lifting capacity (kg) 2,030 1,830 1,480 1,230 1,080 980 880 830

andbelow

andbelow

andbelow

andbelow

WORKING RANGE


18

17

16

15

14

13

12

11

10

9

8

7

6

TM-ZT635 13.34-m BOOMTM-ZT634 10.8-m BOOMTM-ZT633 8.31-m BOOM

78˚70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚

Lifti

ng h

eigh

t (m

)

Load radius (m)0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

WORKING RANGE

RATED LIFTING CAPACITIES NOTE:The mass of hook (TM-ZT653: 65 kg, TM-ZT654/355: 90 kg), slings and all similarly used load handling devices must be added to the mass of the load.

TM-ZT630 series



TECHNICAL SPECIFICATION NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 60 L/min.2. *No allowance included for boom deflection under loaded conditions.


MODEL TM-ZT633 TM-ZT634 TM-ZT635CRANE CAPACITY 6,350 kg at 1.85 m (6-part lines) 6,350 kg at 1.8 m (6-part lines) BOOM Fully hydraulic telescoping boom of Fully powered partly synchronized telescoping boom of pentagonal box construction pentagonal box construction Sections 3 4 5 Length 3.47 m-8.31 m 3.55 m-10.8 m 3.77 m-13.34 m Extending speed 4.84 m / 18 s 7.25 m / 21 s 9.57 m / 25 s Elevation range/speed 1˚ to 78˚ / 12 s Max. Hook height* Approx. 10.2 m* Approx. 12.7 m* Approx. 15.2 m* Max. Load radius* 8.09 m* 10.58 m* 13.12 m*WINCH Hydraulic motor driven. Hydraulic motor driven. Spur gear Spur gear speed reduction, speed reduction, provided with provided with mechanical brake. mechanical brake and cable follower. Max. Single line pull 10.37 kN {1,058 kgf} Max. Single line speed 66 m/min. (at 4th layer) Wire rope (Diameter x length) 8 mm x 56 m 8 mm x 69 m 8 mm x 81 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm}OUTRIGGERS Manually extended sliders and hydraulically extended jacks. Integral with crane frame. Power up and down. Extended width Max. : 3.8 m Mid. : 3.0 m Min. : 2.20 mHYDRAULIC SYSTEM Pump Single gear pump Control valves Multiple control valves with integral safety valveSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hook safety latch •Level gauge •Hydraulic safety valves, check valves and holding valvesSUITABLE TRUCKS Gross vehicle mass 12,000 kg or more

TM-ZT650 series




82˚70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚


22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

Load radius (m)

Lifti

ng h

eigh

t (m

)

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

TM-ZT654 12.91-m BOOMTM-ZT653 9.5-m

BOO

M

TM-ZT653

TM-ZT654

TM-ZT655

4.2m/6.86-m boomLoad Radius (m) 2.25 3.1 3.5 4.0 4.5 5.0 6.0 6.61Rated Lifting Capacity (kg) 6,000 4,900 4,200 3,700 3,300 2,900 2,250 2,0009.5-m boomLoad Radius (m) 4.5 5.0 6.0 7.0 8.0 9.25Rated Lifting Capacity (kg) 3,000 2,900 2,250 1,850 1,550 1,300

andbelow

andbelow

4.31m/7.19-m boomLoad Radius (m) 2.25 3.1 3.5 4.0 4.5 5.0 6.0 6.94Rated Lifting Capacity (kg) 6,000 4,900 4,200 3,700 3,300 2,900 2,200 1,80010.05-m boomLoad Radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 9.8Rated Lifting Capacity (kg) 3,000 2,900 2,200 1,800 1,550 1,350 1,20012.91-m boomLoad Radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.66Rated Lifting Capacity (kg) 3,000 2,650 2,200 1,800 1,500 1,300 1,100 950 700

andbelow

andbelow

andbelow

4.4m/7.28-m boomLoad Radius (m) 2.25 3.1 3.5 4.0 4.5 5.0 6.0 7.03Rated Lifting Capacity (kg) 6,000 4,900 4,200 3,700 3,300 2,900 2,200 1,70010.16-m boomLoad Radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 9.91Rated Lifting Capacity (kg) 3,000 2,700 2,200 1,750 1,350 1,100 95013.04-m boomLoad Radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.00 12.0 12.7Rated Lifting Capacity (kg) 3,000 2,600 2,000 1,700 1,350 1,100 950 850 700 60015.92-m boomLoad Radius (m) 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.67Rated Lifting Capacity (kg) 2,600 2,000 1,650 1,350 1,100 950 850 700 600 500 400

andbelow

andbelow

andbelow

andbelow

MODEL TM-ZT653 TM-ZT654 TM-ZT655

TECHNICAL SPECIFICATION NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 85 L/min.2. *No allowance included for boom deflection under loaded conditions.

MAXIMUM LIFTING CAPACITY 6,000 kg at 2.25 m (4-part line)CRANE CAPACITY 4,900 kg at 3.1 m (4-part lines) BOOM Fully hydraulic telescoping boom Fully powered partly synchronized telescoping boom Sections 3 4 5 Length 4.20 m-9.50 m 4.31 m-12.91 m 4.40 m-15.92 m Extending speed 5.3 m / 17 s 8.6 m / 23 s 11.5 m / 30 s Elevation range/speed 1˚ to 82˚ / 13 s Max. lifting height* Approx. 11.5 m* Approx. 11.5 m* Approx. 18 m* Max. load radius* 9.25 m* 9.25 m* 15.67 m*WINCH Hydraulic motor driven. Hydraulic motor driven. Spur gear Spur gear speed reduction, speed reduction, provided with provided with mechanical brake. mechanical brake and cable follower. Max. single line pull 14.72 kN {1,500 kgf} Max. single line speed 64 m/min. (at 4th layer) Wire rope (Diameter x length) 10 mm x 63 m 10 mm x 80 m 10 mm x 95 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm}OUTRIGGERS Manually extended sliders and hydraulically extended jacks. Integral with crane frame. Power up and down. Extended width Max. : 3.9 m Mid. : 3.1 m Min. : 2.25 mHYDRAULIC SYSTEM Pump Single gear pump Control valves Multiple control valves with integral safety valvesSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Over-winding alarm •Hook safety latch •Level gauge •Hydraulic safety valves, check valves and holding valvesSUITABLE TRUCKS Gross vehicle mass 20,000 kg or more

3.47-m boomLoad Radius (m) 1.85 2.35 2.95 3.25Rated Lifting Capacity (kg) 6,350 5,050 4,050 3,7005.91-m boomLoad Radius (m) 2.95 3.8 4.1 4.5 5.0 5.69Rated Lifting Capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,9508.31-m boomLoad Radius (m) 3.8 4.1 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.09Rated Lifting Capacity (kg) 3,130 2,930 2,580 2,280 2,030 1,830 1,680 1,550 1,430 1,280

andbelow

andbelow

andbelow

3.55-m boom

Load Radius (m) 1.85 2.35 2.95 3.33

Rated Lifting Capacity (kg) 6,350 5,050 4,050 3,6305.99-m boom

Load Radius (m) 2.95 3.8 4.1 4.5 5.0 5.77

Rated Lifting Capacity (kg) 4,050 3,130 2,930 2,580 2,280 1,9008.39-m boom

Load Radius (m) 3.8 4.1 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.17

Rated Lifting Capacity (kg) 3,130 2,930 2,580 2,280 2,030 1,830 1,680 1,550 1,430 1,28010.8-m boom

Load Radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.58

Rated Lifting Capacity (kg) 2,030 1,830 1,480 1,230 1,080 980 880 830

andbelow

andbelow

andbelow

andbelow

3.77-m boom

Load Radius (m) 1.8 2.25 2.85 3.55

Rated Lifting Capacity (kg) 6,350 5,050 4,050 3,2306.21-m boom

Load Radius (m) 2.85 3.6 3.9 4.5 5.0 5.5 5.99

Rated Lifting Capacity (kg) 4,050 3,180 2,930 2,430 2,130 1,880 1,6508.59-m boom

Load Radius (m) 3.6 3.9 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.37

Rated Lifting Capacity (kg) 3,130 2,930 2,430 2,130 1,880 1,650 1,480 1,350 1,230 1,08010.97-m boom

Load Radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 10.75

Rated Lifting Capacity (kg) 2,030 1,830 1,480 1,230 1,030 880 780 73013.34-m boom

Load Radius (m) 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.12

Rated Lifting Capacity (kg) 1,330 1,100 950 830 730 650 600 550 500

andbelow

andbelow

andbelow

andbelow

andbelow

TM-ZT635

TM-ZT634

TM-ZT633

WORKING RANGE


82˚70˚

60˚

50˚

40˚

30˚

20˚

10˚

1˚


22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

Load radius (m)

Lifti

ng h

eigh

t (m

)

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

TM-ZT824 12.91-m BOOMTM-ZT823 9.5-m BOOM

Power for versatilityGood for a small to large size truck mount.

MAXIMUM LIFTING CAPACITY: 8.2 tonEXTENDED BOOM LENGTH: 15.92 m

TM-ZT820 series



* HOOK STOWING DEVICE. Mechanically stowed beneath boom top portion.

MODEL TM-ZT823 TM-ZT823H* TM-ZT824 TM-ZT824H* TM-ZT825 TM-ZT825H*MAXIMUM LIFTING CAPACITY 8,200 kg at 1.8 m (6-part lines) CRANE CAPACITY 4,900 kg at 3.1 m (4-part lines) BOOM Fully hydraulic telescoping boom Fully powered partly synchronized telescoping boom Sections 3 4 5 Length 4.20 m-9.50 m 4.31 m-12.91 m 4.40 m-15.90 m Extending speed 5.3 m / 17 s 8.6 m / 23 s 11.5 m / 30 s Elevation range/speed 1˚ to 82˚ / 13 s Max. lifting height** Approx. 11.5 m** Approx. 15 m** Approx. 18 m** Max. load radius** 9.25 m** 12.66 m** 15.67 m**WINCH Hydraulic motor driven. Hydraulic motor driven. Spur gear Spur gear speed reduction, speed reduction, provided with provided with mechanical brake. mechanical brake and cable follower. Max. single line pull 14.72 kN {1,500 kgf} Max. single line speed 64 m/min. (at 4th layer) Wire rope (Diameter x length) 10 mm x 63 m 10 mm x 80 m 10 mm x 95 mSLEWING Hydraulic motor driven. Worm gear speed reduction. Continuous 360˚ full circle slewing on ball bearing slew ring. Automatic slewing lock. Speed 2.5 min-1 {rpm}OUTRIGGERS Manually extended sliders and hydraulically extended jacks. Integral with crane frame. Power up and down. Extended width Max. : 3.9 m Mid. : 3.1 m Min. : 2.25 mHYDRAULIC SYSTEM Pump Single gear pump Control valves Multiple control valves with integral safety valvesSTANDARD SAFETY EQUIPMENT •Load meter •Load indicator •Hoisting limiter* •Over-winding alarm •Hook safety latch •Level gauge •Hydraulic safety valves, check valves and holding valvesSUITABLE TRUCKS Gross vehicle mass 20,000 kg or more

TECHNICAL SPECIFICATION NOTE:1. Operating speeds of the crane are guaranteed under the conditions that the pump delivery is 85 L/min.2. ** No allowance included for boom deflection under loaded conditions.

4.2-m boomLoad radius (m) 1.8 2.25 3.1 3.5 3.95Rated lifting capacity (kg) 8,200 6,000 4,900 4,200 3,7506.86-m boomLoad radius (m) 2.25 3.1 3.5 4.0 4.5 5.0 6.0 6.61Rated lifting capacity (kg) 6,000 4,900 4,200 3,700 3,300 2,900 2,250 2,0009.5-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.25Rated lifting capacity (kg) 3,000 2,900 2,250 1,850 1,550 1,300

andbelow

andbelow

andbelow

4.31-m boomLoad radius (m) 1.8 2.25 3.1 3.5 4.06Rated lifting capacity (kg) 8,200 6,000 4,900 4,200 3,6507.19-m boomLoad radius (m) 2.25 3.1 3.5 4.0 4.5 5.0 6.0 6.94Rated lifting capacity (kg) 6,000 4,900 4,200 3,700 3,300 2,900 2,200 1,80010.05-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 9.8Rated lifting capacity (kg) 3,000 2,900 2,200 1,800 1,550 1,350 1,20012.91-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.66Rated lifting capacity (kg) 3,000 2,650 2,200 1,800 1,500 1,300 1,100 950 700

andbelow

andbelow

andbelow

andbelow

4.4-m boomLoad radius (m) 1.8 2.25 3.1 3.5 4.15Rated lifting capacity (kg) 8,200 6,000 4,900 4,200 3,5507.28-m boomLoad radius (m) 2.25 3.1 3.5 4.0 4.5 5.0 6.0 7.03Rated lifting capacity (kg) 6,000 4,900 4,200 3,700 3,300 2,900 2,200 1,70010.16-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 9.91Rated lifting capacity (kg) 3,000 2,700 2,200 1,750 1,350 1,100 95013.04-m boomLoad radius (m) 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 12.7Rated lifting capacity (kg) 3,000 2,600 2,000 1,700 1,350 1,100 950 850 700 60015.92-m boomLoad radius (m) 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.67Rated lifting capacity (kg) 2,600 2,000 1,650 1,350 1,100 950 850 700 600 500 400

andbelow

andbelow

andbelow

andbelow

andbelow

TM-ZT825

TM-ZT824

TM-ZT823

MAXIMUM LIFTING CAPACITY: 17.0 tonEXTENDED BOOM LENGTH: 25.1 m

The first 6 sections boom on Boom TruckKnown World Wide, TADANO Quality on your hand.

MAXIMUM LIFTING CAPACITY: 18,000 kgEXTENDED BOOM LENGTH: 33.5 m

Reach New Heights with the longest boomavailable in a 18 ton boom truck

BOOM TRUCK

HYDRAULIC Hydraulic motor Axial piston type for winch and slewing Control valves Multiple control valves with integral safety valve Recommended Hydraulic pump Pressure : Max. 20.6 Mpa Delivery : Max. 60 L/min Reserve tank 90 L capacity *PTO/Mounting not includedELECTRICAL SYSTEM Power supply DC24 V SAFETY DEVICE Pendant type over - winding cutout Load meter Load indicator Hook safety latch Level gauge Hydraulic safety valves, check valves and holding valvesBOOM REST No required LOCALLY PROVIDED EQUIPMENT Crane mounting parts (Include P.T.O, P.T.O Mounting) CRANE WEIGHT Approx. 3,135 kg (crane bare)REAR OUTRIGGERS WEIGHT Approx. 281 kg (Outriggers, mountings, etc. included)

MAXIMUM LIFTING CAPACITY8,200 kg at 1.8 m (6-part lines)BOOM 5-sectioned, fully powered partly synchronized telescoping boom of pentagonal box construction Retracted length 4.40 m Extended length 15.92 m Extended speed 11.52 m / approx. 32 s Elevation Elevated by double-acting hydraulic cylinder Elevation speed 1˚ to 82˚ / approx. 14 s NOTE: Extended speed and elevation speed are calculated under the condition that the flow is 80 L/min. Boom point 3 sheaves WINCH Hydraulic motor driven, planetary gear speed reduction, provided with automatic brake and cable follower Single line pull 14.7 kN {1,500 kgf} Single line speed 60 m/min (at 4th layer) NOTE: Single line speed is calculated under the condition that the flow is 15.8 GPM Wire rope Diameter x length 10 mm x 95 m Breaking strength 73.5 kN {7.5 tf} Hook block 3 sheaves (For maximum lifting load)SLEWING Hydraulic motor driven, Worm gear speed reduction, Continuous 360˚ full circle slewing on ball bearing slew ring, Automatic slewing lock Slewing speed 2.5 min-1 {rpm} OUTRIGGERS <CAB BACK MOUNTED> Outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,250 mm Mid. 3,300 mm Max. 4,300 mm Rear stabilizers (Straight Down type) *OPTIONAL ITEM Hydraulically extended jacks, integral with chassis frame Span 2,250 mm <REAR MOUNTED> Rear outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,250 mm Mid. 3,300 mm Max. 4,300 mm

Yellow: Extended Mid.

Extended Max.Extended Mid.Extended Min.

White: Extended Max.

<CAB BACK MOUNTED>

Extension Mark for Cab Back Mout

Outriggers Mid.

Outriggers Max. Outriggers Min.

<REAR MOUNTED>





Outriggers Mid.

8,200 6,000 5,000 4,200 3,550 (4.15 m)

6,000 6,000 5,000 4,200 3,700 3,200 3,100 2,700 2,000 1,550 (7.03 m)

3,000 3,000 3,000 3,000 3,000 2,700 1,900 1,500 1,200 1,000 850 (9.91 m)

3,000 3,000 3,000 3,000 2,900 2,600 1,900 1,500 1,200 1,000 850 750 650 600 (12.7 m)

2,600 2,600 2,600 2,600 2,600 1,900 1,500 1,200 1,000 850 750 650 550 500 400

Load radius Boom

Notes: Bare Chassis Rated capacities on this chart are maximum allowable loads with the outriggers properly extended on a firm level surface and the crane leveled and mounted on a factory recommended truck. All capacities incluide mass of hook block (90 kg), sling, etc. Load radii mean actual ones including effects of loaded boom deflection. For operation forward of outriggers, reduce load values to 25% of Bare Chassis Rated Capacities. For boom length not shown, use rating of next longer boom. For boom length longer than 10.16 m extend outriggers to max. position 13.04-m boom means mark on 4th boom section side plate is half seen. Standard number of part lines for each boom length is as shown the below table. The single line load shall not exceed 14.7 kN (1,500 kg)

Notes: Rated Lifting Capacities are based on crane strength only. Capacities based on stability may be lower than those in above table depending on loading conditions and types of chassis. Bare Chassis Rated capacities on this chart are maximum allowable loads with the outriggers properly extended on a firm level surface and the crane leveled and mounted on a factory recommended truck. All capacities incluide mass of hook block (90 kg), sling, etc. Load radii mean actual ones including effects of loaded boom deflection. For operation forward of outriggers, reduce load values to 25% of Bare Chassis Rated Capacities. For boom length not shown, use rating of next longer boom. For boom length longer than 10.16 m extend outriggers to max. position 13.04-m boom means mark on 4th boom section side plate is half seen. Standard number of part lines for each boom is as shown the below table. The single line load shall not exceed 14.7 kN (1,500 kgf).

RATED LIFTING CAPACITY (IN KILOGRAMS) CAPACITY CHART; B

CAPACITY CHART; D

Outriggers Outriggers Extended Max. (Over side and rear)

1.8 2.4 2.9 3.5 4.0 4.5 4.6 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.67and below

4.4-m Boom

7.28-m Boom

10.16-m Boom

13.04-m Boom

15.92-m Boom

8,200 6,000 5,000 4,200 3,550 (4.15 m)

6,000 6,000 5,000 4,200 3,700 3,300 3,200 2,900 2,200 1,750 (7.03 m)

3,000 3,000 3,000 3,000 3,000 2,700 2,200 1,800 1,400 1,150 1,000 (9.91 m)

3,000 3,000 3,000 3,000 2,900 2,600 2,000 1,700 1,400 1,150 1,000 900 750 650 (12.7 m)

2,600 2,600 2,600 2,600 2,600 2,000 1,650 1,400 1,150 1,000 900 750 650 550 450

Load radius Boom

Outriggers Outriggers Extended Max. (Over side and rear)

1.8 2.4 2.9 3.5 4.0 4.5 4.6 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.67and below

4.4-m Boom

7.28-m Boom

10.16-m Boom

13.04-m Boom

15.92-m Boom







Boom Length 4.4 m 7.28 m 10.16 m 13.04 m 15.92 mNo. of part lines 6 4 4 4 4

Over-front area

Over-side area

Full capacity work area

Over-rear area

Over-side area

Center of rotation

Over-front area

Over-side area

Full capacity work area

Over-rear area

Over-side area

Center of rotation

Extension Mark

Extension Mark

TM-1052 [8.2 ton] crane specifications

Boom Length 4.4 m 7.28 m 10.16 m 13.04 m 15.92 mNo. of part lines 6 4 4 4 4

TM-1882 (17 ton) crane specifications

MAXIMUM LIFTING CAPACITY 17,000 kg@ 1.5 m (6-part lines) BOOM 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal box construction Retracted length 5.6 m Extended length 25.1 m Extended speed 19.5 m / 59 s @ 2,430 rpm pump or 72s @ 2,000 rpm pump Elevation Elevated by double-acting hydraulic cylinder Elevation speed -7˚ to 80˚ / 20 s @ 2,430 rpm pump or 24 s @ 2,000 rpm pump NOTE: Extended speed and elevation speed are calculated under the condition that the flow is 95 L/min Boom point 2 sheaves WINCH Hydraulic motor driven, Planetary gear speed reduction, provided with automatic break Single line pull 3,265 kg 4,400 kg (Winch capacity of permissible line pull at 1st layer) Single line speed 85 m/min (@ 3rd layer) @ 2,430 rpm pump or 70 m/min @ 2,000 rpm pump NOTE: Single line speed is calculated under the condition that the flow is 216 L/min Wire rope diameter x length 14 mm x 85 m breaking strength 134 kN SLEWING Hydraulic motor driven, Planetary gear speed reduction Continuous 360˚ full circle slewing (Standard) Slewing speed 360˚ / 37 s @ 2,430 rpm pump or 45 s @ 2,000 rpm pump Non-Continuous 375˚ rotation on ball bearing slew ring (Option) Slewing speed 375˚ / 38 s @ 2,430 rpm pump or 47 s @ 2,000 rpm pumpOUTRIGGERS <TRACTOR MOUNTED> Outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm Rear stabilizers Hydraulically extended jacks, Integral with chassis frame Span 2,250 mm Single front stabilizer Hydraulic extended jack in front of bumper for 360˚ lifting operations

<CAB BACK MOUNTED> Outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm Rear stabilizers Hydraulically extended jacks, Integral with chassis frame Span 2,250 mm

Single front stabilizer Hydraulic extended jack in front of bumper for 360˚ lifting operations

<REAR MOUNTED> Rear outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm Front outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm

WORKING RANGE

RATED LIFTING CAPACITY (IN KILOGRAMS) SAE85% / ISO4305

Max. of load 3,200 kg 6,000 kg 12,000 kg 17,000 kg1 2 4 6No. of part lines

The above lifting heights and boom angles are based on a straight (unladen) boom, and allowance should be made for boom deflection obtained under laden condition.

Load radius (m)

Lifti

ng h

eigh

t (m

)

Notice : The chart is only for reference and should not be used for operation. Maintain a clearances at least 3m between any part of the crane, load line or load and any electrical line carrying up to 50,000 volts. 0.3 m additional clearance is required for every additional 30,000 volts or less.

5.6-m Boom 9.5-m Boom 13.4-m Boom 17.3-m Boom 21.2-m Boom 25.1-m Boom

Max. Mid. Min. Max. Mid. Min. Max. Mid. Max. Mid. Max. Max.

Load radius

(m)

Load radius

(m)OutriggersExtended

OutriggersExtended

OutriggersExtended

OutriggersExtended

OutriggersExtended

OutriggersExtended

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

(5.15 m) (9.05 m) (12.95 m) (16.85 m) (20.75 m) (24.65m)

NOTE:1) Rated lifting capacities on this chart show maximum allowable loads with outriggers properly extended on a firm surface and the crane leveled and mounted on a factory recommended truck. The rated lifting capacities in shaded areas are based on crane strength and others, on its stability. 2) The weight of handling devices such as hook block, slings, etc., must be considered part of the load and must be deducted from the rated lifting capacities. 3) Weights of any accessories attached to the boom or loadline must be deducted from the rated lifting capacities.4) The operator must reduce loads to allow for such factors as wind, ground conditions, operating speed and the effects of freely suspended loads such as boom deflection.5) For full capacity 360°around the truck,the chassis requires the front stabilizer (ex. rear mounted) and additional counterweight in the underside of the bed. 6) For boom lengths or radius not shown, use the rated lifting capacity of next longer boom lengths or radius. 7) For boom lengths longer than 9.5 m, extend outriggers to max. or mid. 8) For boom lengths longer than 17.3 m, extend outriggers to max. 9) 17.3-m boom means 1st mark on 4th boom section side plate is half visible. 10) 21.2-m boom means 2nd mark on 4th boom section side plate is half visible.11) Winch wire rope: diameter × length 14 mm × 85m, breaking strength 134 kN 12) Keep at least 3 wraps of loadline on winch drum.13) Maximum load for number of part lines is as shown below.14) Part of lines are;

1.5 2.5 3.0 3.5 4.0 5.0 6.0 8.0

10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0

75˚63˚57˚51˚43˚21˚

17,00010,000

8,8007,8006,8005,600

3,810

13,60010,000

8,8007,8006,8005,500

3,810

10,0006,6004,6003,6002,8001,900

1,830

76˚73˚69˚66˚59˚51˚33˚

7,9007,9007,2006,4005,4004,4003,200

1,750

7,9007,9007,2006,4005,1003,6002,000

1,540

5,8004,0003,0002,4001,6001,100

500

270

78˚76˚74˚69˚65˚55˚43˚28˚

7,9007,0006,0005,0004,1003,1002,4001,700

830

7,9007,0006,0004,8003,6002,0001,200

800

80˚76˚73˚66˚58˚49˚40˚27˚

4,0004,0003,8002,9002,2001,7001,4001,000

490

4,0004,0003,6002,0001,200

800500350

310

78˚75˚70˚64˚58˚51˚44˚35˚25˚

4,0003,2002,6002,1001,7001,4001,000

800650

270

78˚74˚69˚64˚59˚53˚47˚41˚33˚24˚

1,8001,8001,8001,5001,2001,000

800650500350150

1.5 2.5 3.0 3.5 4.0 5.0 6.0 8.0

10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0

Extension Mark


Extended Max.

Outriggers Mid.

Extended Mid.Extended Min.


<CAB BACK MOUNTED><TRACTOR MOUNTED>

Extension Mark


Extended Max.

Outriggers Mid.


Extended Mid.Extended Min.


<REAR MOUNTED>

Outriggers Max. Outriggers Min.Outriggers Max. Outriggers Min.

Outriggers Mid.

Rear OutriggersFront Outriggers


Yellow: Extended Mid.White: Extended Max.


Extension Mark for Rear Mout


( ) ( ) ( ) ( )

( ) ( )

5

15

25

5 15 252010

20

30

0˚

5.6

0

10

9.5

13.4

17.3

21.2

25.1

10˚

20˚

30˚

40˚

50˚

60˚70˚

80˚

0

* Estimated axle scale weights prior to installation of crane and stabilizers for 78% stability. Include counterweight.


approx. 7,200 kgapprox. 15,400 kgapprox. 22,600 kg5,900 to 6,600 mm4,000 to 4,800 mm4,000 kg Min. (*)4,700 kg Min. (*)328 cm3 Min. per rail

35 cm3 Min. per rail


Approx. 390 N-m Min.Approx. 550 to 2,400 rpm.Approx. 1,400 mm Min.Approx. 915 mm Max.Approx. 1,060 mm Max.

Gross Axle Mass Rating (GAMR),front Gross Axle Mass Rating (GAMR),rear Gross Vehicle Mass Rating Wheelbase (WB)Cab to axleStability Mass, frontStability Mass, rearFrame Section Modulus (SM)758 MPa steelFrame Section Modulus (SM)at the front stabilizer attachment point,758 MPa steelFrame Section Modulus (SM)over rear stabilizers, 758 MPa steelPTO torquePTO revolutionWidth for crane mountingFrame width (outside)Frame height (ground to frame top)





Gross Axle Mass Rating (GAMR),front Gross Axle Mass Rating (GAMR),rear Gross Vehicle Mass Rating Wheelbase (WB)Cab to axleStability Mass, frontStability Mass, rearFrame Section Modulus (SM) under crane,758 MPa steelFrame Section Modulus (SM)over rear outriggers, 758 MPa steelPTO torquePTO revolutionWidth for crane mountingFrame width (outside)Frame height (ground to frame top)





Gross Axle Mass Rating (GAMR),front Gross Axle Mass Rating (GAMR),rear Gross Vehicle Mass Rating Wheelbase (WB)Cab to axleStability Mass, frontStability Mass, rearFrame Section Modulus (SM)under crane, 758 MPa steelFrame Section Modulus (SM)at the front stabilizer attachment point,758 MPa steelFrame Section Modulus (SM)over rear stabilizers, 758 MPa steelPTO torquePTO revolutionWidth for crane mountingFrame width (outside)Frame height (ground to frame top)

TM-1882 (17 ton) crane configurations

TM-1882 (17 ton) crane dimensional specifications

This mount requires front stabilizer, rear stabilizers, and additional counter-weight in the underside of the tractor frame for full capacity 360˚ around the truck.The complete unit must be istalled in accordance with factory requirements and a test performed to determine actual stability and counterweight requirements for variety of trucks.TRACTOR MOUNTED product can not convert to REAR MOUNTED configuration.

<TRACTOR MOUNTED> (mm)

(mm)

(mm)

6,350 MIN 6,600 MAX5,000 kg MIN 5,300 kg MIN

4,000 MIN 4,318 MAX

1,88

0MAX

1,0

67M

AX

1,168 MIN

<REAR MOUNTED>

<CAB BACK MOUNTED>

This mount requires front outriggers, torsion resisting box and additional counterweight in the underside of the bed for full capacity 360˚ around the truck.The complete unit must be istalled in accordance with factory requirements and a test performed to determine actual stability and counterweight requirements since individual truck chassis vary.REAR MOUNTED product can not convert to CAB BACK MOUNTED configuration.

3,600 kg MIN 4,540 kg MIN

CA: 3,250 MIN 3,500 MAX 5,000 MIN 5,258 MAX

1,

820

MAX

1,01

0 M

AX

This mount requires front stabilizer,rear stabilizers torsion resisting box and additional counterweight in the underside of the bed for full capacity 360˚ around the truck. The complete unit must be istalled in accordance with factory requirements and a test performed to determine actual stability and counterweight requirements for variety of trucks. CAB BACK MOUNTED product can not convert to REAR MOUNTED configuration.

Min 5,600 Max 25,100450

2,80

92,

143

stro

ke78

768

0

Min 2,180Mid 4,000Max 5,700

2,428

4,000 kg MIN

5,900 to 6,600

4,700 kg MIN

HYDRAULIC Hydraulic motor For winch and slewing Control valves Multiple control valves with integral safety valve Hydraulic pump 3-section gear pump Winch system : (20.6 Mpa) 121 L/min@ 2,430 rpm pump 99.6 L/min@ 2,000 rpm pump Boom and outriggers system : (21.1 MPa) 95 L/min@ 2,430 rpm pump 78.2 L/min@ 2,000 rpm pump Slewing system : (12.1 MPa) 25 L/min@ 2,430 rpm pump 20.6 L/min@ 2,000 rpm pump Reserve tank 295 L capacity *PTO/Mounting note included ELECTRICAL SYSTEM Power supply DC12 V with a converter (Step down converter from 24 V) SAFETY DEVICES Pendant type over-winding cut out Hook safety latch Level gauge Hydraulic safety valves, check valves and holding valves Over load shutoff with load indicator (TADANO’s exlusive “AMA” system) Load / Boom angle indication Audible warning External warning lampsBOOM REST Removable TORSION BOX <CAB BACK MOUNTED> The weight of 22 ft (6.7 m) standard torsion box is approx. 1,800 kg.

<REAR MOUNTED> The weight of 14 ft (3.6 m) torsion box is approx. 1,400 kg.CRANE WEIGHT Approx. 6,900 kg (bare), approx. 8,400 kg (include all items; crane, tank, oil, rear stabilizer, boom rest, etc.)OPTIONHook block Swivel hook with safety latch 1) 3,200 kg capacity ( for single line use, 60 kg) 2) 6,000 kg capacity ( for two part lines use, 100 kg) 3) 12,000 kg capacity ( for four part lines line use, 160 kg) 4) 18,000 kg capacity ( for six part lines use, 220.5 kg) *Note A crane does not come with a hook block as a standard item and shall be ordered out from the above.



WORKING RANGE

RATED LIFTING CAPACITY (IN KILOGRAMS) SAE85% / ISO4305

NOTE:1) Rated lifting capacities on this chart show maximum allowable loads with outriggers properly extended on a firm surface and the crane leveled and mounted on a factory recommended truck. The rated lifting capacities in shaded areas are based on crane strength and others, on its stability.2) The weight of handling devices such as hook block, slings, etc., must be considered part of the load and must be deducted form the rated lifting capacities.3) Weights of any accessories attached to the boom or loadline must be deducted from the rated lifting capacities.4) The operator must reduce loads to allow for such factors as wind, ground conditions, operating speed and the effects of freely suspended loads such as boom deflection.5) For full capacity 360° around the truck, the chassis requires the front stabilizer (ex rear mounted) and additional counterweight in the underside of the bed.6) For boom length or radius not shown use the rated lifting capacity of next longer boom lengths or radius.7) For boom length longer than 14 m, extend outriggers to the Max. or Mid. Extended.8) For boom length longer than 23.8 m, extend outriggers to the Max. Extended.9) Keep at least 3 wraps of load line on winch drum.10) 14-m boom means 1st mark on 2nd boom section side plate is half visible.11) 18.9-m boom means 2nd mark on 2nd boom section side plate is half visible.12) 23.8-m boom means 3rd mark on 2nd boom section side plate is half visible.13) 28.6-m boom means 4th mark on 2nd boom section side plate is half visible.

1 2 4 6No. of part linesThe above lifting heights and boom angles are based on a straight (unladen) boom, and allowance should be made for boom deflection obtained under laden condition.

Load radius (m)

Lifti

ng h

eigh

t (m

)

TM-20110 (18 ton) crane capacity

< CAB BACK MOUNTED>

Rear OutriggersFront OutriggersRear StabilizersFront Outriggers




Extension Mark


Extended Max.

Outriggers Mid.

Outriggers Max. Outriggers Min. Outriggers Max. Outriggers Min.

Outriggers Mid.Extended Max.Extended Mid.

Extended Min. Extended Min.

White: Extended Max. White: Extended Max.

Extension Mark for Rear Mout

<REAR MOUNTED>


8.3-m Boom 14-m Boom 18.9-m Boom 23.8-m Boom 28.6-m Boom 33.5-m Boom

Max. Mid. Min. Max. Mid. Min. Max. Mid. Max. Mid. Max. Max.

Load radius

(m)

Load radius

(m)OutriggersExtended

OutriggersExtended

OutriggersExtended

OutriggersExtended

OutriggersExtended

OutriggersExtended

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

LoadedBoomAngle

Notice : The chart is only for reference and should not be used for operation. Maintain a clearances at least 3 m between any part of the crane, load line or load and any electrical line carrying up to 50,000 volts. 0.3 m additional clearance is required for every additional 30,000 volts or less.

1.5 2.5 3.0 3.5 4.0 5.0 6.0 8.0

10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0

1.5 2.5 3.0 3.5 4.0 5.0 6.0 8.0

10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0

18,000 11,300

9,900 8,800 7,900 6,400 5,200

12,70011,300

9,9008,8007,8005,4003,750

9,0006,5004,7003,5002,7501,8001,200

7,2007,2007,2006,2005,1003,7002,6001,800

7,2007,2007,2005,4003,8002,2001,450

900

4,3003,4002,7001,8501,300

650300

5,7004,7003,3002,5002,0001,5001,100

750

5,2003,6002,2501,5001,000

650400

77˚72˚67˚61˚56˚50˚41˚35˚21˚

77˚72˚67˚64˚58˚52˚48˚42˚35˚

75˚71˚69˚65˚60˚56˚52˚47˚42˚

4,3003,2002,4002,0001,6001,250

950700500

3,8002,2501,5001,050

700450250

2,4002,3001,9001,6001,3001,000

750550400

1,7001,5001,3001,100

900750600400250

79˚73˚68˚64˚60˚51˚41˚

78˚76˚73˚69˚65˚55˚44˚29˚

75˚73˚66˚59˚51˚44˚32˚10˚

2,900 2,100 550 1,000 650 250 0˚ (7.88 m) (13.57 m) (18.44 m)0˚ 0˚

35

25

30

20

15

10

5

020 25151050

0˚

10˚

20˚

30˚

40˚

50˚

60˚

70˚80˚

33.5

28.6

23.8

18.9

14.0

8.3

(m)MAXIMUM LIFTING CAPACITY 18,000 kg @ 1.5 m (6-part lines) BOOM 5-sectioned, fully powered synchronized telescoing boom of pentagonal box construction Retracted length 8.3 m Extended length 33.5 m Extended speed 25.2 m / 73 s @ 2,430 rpm pump or 89 s @ 2,000 rpm pump Elevation Elevated by double-acting hydraulic cylinder Elevation speed -5˚ to 80˚ / 23 s @ 2,430 rpm pump or 28 s @ 2,000 rpm pump NOTE: Extended speed and elevation speed are calculated under the condition that the flow is 95 L/min Boom point 2 sheaves WINCH Hydraulic motor driven, Planetary gear speed reduction, provided with automatic break Single line pull 3,265 kg 4,400 kg (Winch capacity of permissible line pull at 1st layer) Single line speed 85 m/min (@ 3rd layer) @ 2,430 rpm pump or 70 m/min @ 2,000 rpm pump NOTE: Single line speed is calculated under the condition that the flow is 216 L/min Wire rope diameter x length 14 mm x 96 m breaking strength 134 kN SLEWING Hydraulic motor driven, Planetary gear speed reduction Continuous 360˚ full circle Slewing (Standard) Slewing speed 360˚ / 37 s @ 2,430 rpm pump or 45 s @ 2,000 rpm pump Non-Continuous 375˚ rotation on ball bearing slew ring (Option) Slewing speed 375˚ / 38 s @ 2,430 rpm pump or 47 s @ 2,000 rpm pumpOUTRIGGERS <CAB BACK MOUNTED> Outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm Rear stabilizers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame Extend width Min. 2,250 mm Max. 3,500 mm Single front stabilizer Hydraulic extended jack in front of bumper for 360˚ lifting operations

<REAR MOUNTED> Rear outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm Front outriggers (Out & Down type) Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame Extend width Min. 2,180 mm Mid. 4,000 mm Max. 5,700 mm

Max. of load 3,200 kg 6,000 kg 12,000 kg 18,000 kg

STRUCTURE Guard frame is separated from floor board.CHASSIS INCLINATION ANGLE Approx. 7˚ to 13˚OUTRIGGERS Hydraulically extended jacks. Power up and down. Extending Extended by a double-acting hydraulic cylinder Stroke 1.4 m Extending speed 1.4 m / 21 s Width 2.14 mWINCH Hydraulic motor driven. Power / Free by means of clutch. Worm gear speed reduction, provided with worm self-lock brake. Capacity 78.5 kN {8000 kgf} (2-part line at 3rd layer) Single line speed 10 m/min (at 3rd layer) Wire rope Diameter x length 14 mm x 30 m Breaking strength 103.9 kN {10.6 tf} Construction 6 x 37 Hook block Single sheaveHYDRAULICS Hydraulic pump Single gear pump Hydraulic motor Gear motor Control valves Multiple control valves with integral safety valve Oil tank capacity approx. 36 LSAFETY DEVICES Hydraulic safety valves, check valves and holding valves Hook safety latch Warning alarm P.T.O indicator lamp Outrigger box lock Outrigger jacks synchronizing Winch clutch lamp Emergency stop switchGENERAL DATA FOR Gross vehicle mass (including self-loader mass)SUITABLE TRUCKS 7,500 to 25,000 kg

NOTE : Operating speeds of the self-loader are guaranteed under the condition that the pump delivery is 60 L /min.

Chassis Inclination Angle : Approx. 7˚ to 13˚General Data For Suitable Trucks : GVW15,000 to 25,000kg

Jacks Remote Controller

Operation box

Winch Capacity:78.5kN {8000kgf}


SL-150 SELF LOADER

Chassis Inclination Angle : Approx. 7˚ to 13˚General Data For Suitable Trucks : GVW15,000 to 25,000kg


CHASSIS INCLINATION ANGLE (REFERENCE)Self-loader

Hook block

Approx. 7˚ to 13˚ (This dimension depends on car model)

TADANO LTD. (International Division)4-12, Kamezawa 2-chome, Sumida-ku Tokyo 130-0014, JapanPhone: +81-3-3621-7750 Fax: +81-3-3621-7785E-mail: [email protected]

http://www.tadano.com/

2014-10 Printed in Japan

Tadano quality: the proof is in the production.No matter how well you design a product, it won't perform as it should unless it's built with the care and concern that you'll find at every Tadano production facility. Besides state-of-the-art production facilities, our quality control and attention to detail assure that every crane we build meets highest standards.

Shido, Japan Takamatsu, Japan

Rayong, Thailand Tadotsu, Japan

When it comes to performance, nothing pulls its weight better than a Tadano Hydraulic Crane.It makes a big difference to approach a tough job with the knowledge that you are working with the best. At Tadano, we've built a worldwide reputation for building the safest, most powerful, most comfortable cranes in the industry. Whatever the job, there's a Tadano Hydraulic Crane to meet your particular needs.

Memo

Memo

Documents

TM series TM series - Tecmaco...The TM-ZE360/300 series, with a lifting capacity of 3.03 tons, and a choice of 4 different lengths of the boom are available to meet your lifting solutions