Upload
duongdung
View
329
Download
13
Embed Size (px)
Citation preview
-1/7-
MES TECHNOSERVICE CO., LTD. TECHNICAL DEPARTMENT / DIESEL PRODUCT GROUP
No.029 GENARAL MANAGER K. Katayama
MANAGER K. Higasa
Alpha Lubricator System ( For Retrofitting )
STAFF T. Matsubara
ENGINE TYPE 60,70,80,90MC / MC-C DATE 2002/09/19
Development & Set up Electronic controlled Alpha Lubricator System
High cost saving for cylinder oil consumption of diesel engine ― Great contribution of operation cost for fleet -
Mitsui Engineering & Shipbuilding Co., Ltd. has started the sale of newly developed electronic
control cylinder oil lubricating system named Alpha Lubricator System, which effects reducing much of cylinder oil consumption for diesel engine under the MAN B&W license agreement. Cylinder oil is essential for the two-stroke marine diesel engine operation; accordingly reduction of the cylinder oil consumption is most effective for saving operation cost of the fleet.
Cylinder oil consumption by the Alpha Lubricator System is lower than by the conventional
lubricator because it can feed cylinder oil quickly at precise timing by electronic control. By this improvement, cylinder oil consumption can be reduced by 20 to 30% approximately.
The Alpha Lubricator System can be installed to two-part type cylinder liner without modification
of the liner. Meanwhile, conventional lubricator being used can be used for an emergency backup device as a fail-safe in case the Alpha system does not work.
The Alpha Lubricator System is functional and comparatively easy installation, therefore high
economical effect is expected such as initial investment cost can be recovered within 1.5 to 2 years in case of 10K90MC engine.
On after-sale service organization for Alpha Lubrication System, we have cooperated with MAN
B&W; therefore, it is possible to provide quick response in the world.
We would like to recommend you adopting the Alpha Lubricator System in this opportunity. In enquiry and quotation, please contact our technical group or local sales office.
PRIORITY
IMMEDIATELY EARLIEST CHANCE DRY DOCK
ADDRESS
1-1, Tama 3-Chome, Tamano, Okayama Japan TEL : +81-863-23-2385 / FAX : +81-863-23-2349
E-mail : [email protected]
TECHNO NEWS
-2/7-
We would introduce particulars, function, reliability and economical effect as follows, and recommend adopting the Alpha Lubricator System to your vessels.
The particular of Alpha Lubricator Layout for Retrofitting
The system layout is shown on the figure right, and has function mentioned below. 1. High-speed Lubrication 2. Intermittent Lubrication 3. Accurate Timing Lubrication 4. Easy Priming 5. Flexible Feed Rate Control by
Various Parameter -Load Change Dependent Control -Mean Effective Pressure control
6. With the Backup function
High Reliability The system has high reliability as mentioned below in addition to above-mentioned functional particularity.
1. The solid structure of piston with plungers. 2. The sensor for detecting the lubrication timing at every stroke.
3. The reliable / durable solenoid valve.
4. The vibration proof type control device.
5. Combination with conventional lubricator resulting the automatic backup in case
of the alarm. 6. Backup function combined with conventional lubricator.
-3/7-
Performance Comparison for Alpha lubricator and Conventional lubricator
Conventional Lubricator ( Oil injection at every Rev. )
Oil amount to be injected from #1 to #4 piston ring position:38%
Alpha lubricator ( In case of oil injection at every 4 Rev. )
Oil amount to be injected from #1 to #4 piston ring position: 71%
Cylinder oil feed rate 1.02 g/PS/h 1.38 g/kW/h
Cylinder oil feed rate 1.02 g/PS/h 1.38 g/kW/h
Cylinder oil feed rate can be reduced byimproved effective lubrication.
-4/7-
Structure of Lubricator Unit for Alpha lubricator
Test result of High Pressure Lubrication
The lubrication timing is controlled by checking the piston movement of lubricator with motion sensor to meet the piston crown top ring position at every stroke.
-5/7-
Quill Arrangement of Cylinder Liners
Mono-block Cylinder liner Dual-cast Cylinder Liner
※ Additional modification is necessary on mono-block cylinder liner at oil groove and injector hole; also non-return valve must be changed to injector for Alpha system. However, Dual-cast cylinder liner does not require such modification because of its structure.
Contents of Alpha Lubricator Installation Following work is necessary for installation of Alpha Lubricator System.
1. Installation of the Lubrication Unit
-6/7-
2. Installation of the Pump Station
3. Installation of the Control Unit
4. Modification of Cylinder Liner ( If necessary ) 5. Piping Work 6. Electric wiring work
-7/7-
Economical Gain for Alpha Lubricator System (Example of 10K90MC Engine)
Estimated Gain: Case 1 : 235,000 L/ 1.5year ( Saving by 29% )
Case 2 : 319,600 L/ 1.5year ( Saving by 39% ) Maintenance Items
1 Year 2 Year 3 Year 4 Year 5 Year Replenishment of Nitrogen ● ● ● ● ● Exchange of Magnetic valve ● Exchange of Bladder ● System Check ●
※ All accumulators on each lubricator require replacement of Nitrogen every year, and
replacement of Bladder every five years. ※ All Magnetic valves on each lubricator require replacement every five years though it
has high reliability.