Embed Size (px)
Citation preview
Toad® Business IntelligenceSuite 2.2
Installation Guide
© 2013 Quest Software, Inc.
ALL RIGHTS RESERVED.
This guide contains proprietary information protected by copyright. The software described inthis guide is furnished under a software license or nondisclosure agreement. This softwaremay be used or copied only in accordance with the terms of the applicable agreement. Nopart of this guide may be reproduced or transmitted in any form or by any means, electronicor mechanical, including photocopying and recording for any purpose other than thepurchaser’s personal use without the written permission of Quest Software, Inc.
The information in this document is provided in connection with Quest products. Nolicense, express or implied, by estoppel or otherwise, to any intellectual property right isgranted by this document or in connection with the sale of Quest products. EXCEPT ASSET FORTH IN QUEST'S TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSEAGREEMENT FOR THIS PRODUCT, QUEST ASSUMES NO LIABILITYWHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORYWARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULARPURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL QUEST BE LIABLE FORANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTALDAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OFPROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OFTHE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF QUEST HAS BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Quest makes no representationsor warranties with respect to the accuracy or completeness of the contents of this documentand reserves the right to make changes to specifications and product descriptions at anytime without notice. Quest does not make any commitment to update the informationcontained in this document.
If you have any questions regarding your potential use of this material, contact:
Quest Software World HeadquartersLEGAL Dept5 Polaris WayAliso Viejo, CA 92656email: [email protected]
Refer to our Web site (www.quest.com) for regional and international office information.
Patents
Toad Intelligence Central and Toad Data Point contain patent pending technology.
Trademarks
Quest, Quest Software, the Quest Software logo, LiteSpeed, Simplicity at Work, Toad,TOAD, T.O.A.D., and TOAD WORLD are trademarks and registered trademarks of QuestSoftware, Inc. For a complete list of Quest Software’s trademarks, seehttp://www.quest.com/legal/trademark-information.aspx. Other trademarks and registeredtrademarks used in this guide are property of their respective owners.
Toad Business Intelligence Suite 2.2Installation GuideNovember 25, 2013
Table of Contents
Requirements 4
About Toad Business Intelligence Suite 4
System Requirements 5
Intelligence Central and Client System Requirements 5
Database and Data Source Requirements 7
Virtualization 11
User Requirements 11
Installation 12
Install Toad Business Intelligence Suite 12
Enter License Key 15
User Registration 15
Silent Installation 16
Install Suite Products Silently 16
Install Toad Data Point Silently 16
Silent Installation Prerequisites 16
Silent Installation Using the Microsoft Installer 16
Appendix: Contact Quest 21
Contact Quest Support 21
Toad Community 21
Contact Quest Software 22
About Quest Software 22
Index 23
Requirements
About Toad Business Intelligence SuiteThis guide is an executive overview of the Toad Business Intelligence Suite. It provides basicinformation about installing the products, including system requirements. See the specificInstallation Guide for each product for more information about each application, includingtroubleshooting information.
The Toad Business Intelligence Suite includes the following products:
Toad Business Intelligence Suite
l Toad Data Point Professional
l Toad Decision Point Professional
l Toad Intelligence Central
l Toad Intelligence Central Admin Console
1
Toad Business Intelligence Suite Installation GuideRequirements
5
System Requirements
Intelligence Central and Client System Requirements
Before installing Toad, ensure that your client system and Intelligence Central host systemmeet the following minimum hardware and software requirements:
Platform 1 GHz Processor (recommended minimum)Exception:Toad Intelligence Central: 2 GHz Multicore
Memory Toad Data Point: 512 MB of RAM minimum, 1 GB recommendedToad Decision Point: 2 GB of RAM minimum, 4 GB recommendedToad Intelligence Central: 4 GB RAMNote: The memory required may vary based on the following:
l Applications that are running on your system when using Toad
l Size and complexity of the database
l Amount of database activity
l Number of concurrent users accessing the database
Hard DiskSpace Toad Data Point 1.33 GB to install Toad, 475 MB to
run Toad
Toad Decision Point 500 MB
Toad IntelligenceCentral
400 MB for installation.200 MB for user data plus a smalloverhead for each snapshot anddataset. Allow for roughly 1 byte ofdisk space for every byte of datacontained within. Specify the userdata location during installation.
OperatingSystem Toad Data Point Windows Server 2003
Windows XP Professional (32-bit or64-bit)Windows Vista (32-bit or 64-bit)Windows Server 2008 (32-bit or 64-bit)Windows 7 (32-bit or 64-bit)Windows Server 2012Windows 8 (32-bit or 64-bit)
Toad Business Intelligence Suite Installation GuideRequirements
6
Toad Decision Point Windows XP Professional SP3 orhigher (32-bit or 64-bit)Windows Server 2008 (64-bit)Windows Server 2008 R2 (64 bit)Windows 7 (32-bit and 64-bit)Windows 8 (32-bit or 64-bit)
Toad IntelligenceCentral,Toad IntelligenceCentral Admin Console
Windows Server 2003 (32-bit and 64-bit)Windows XP Service Pack 3 (32-bitand 64-bit)Windows Server 2008 (64-bit)Windows Server 2008 R2 (64-bit)Windows 7 (32-bit and 64-bit)Windows Server 2012 (64-bit)Windows 8 (32-bit and 64-bit)
.NETFramework
Toad Data Point:The .NET Framework is required. The version is dependent on theoperating system.
.NET 4.5 Windows Vista SP2, Windows 7, Windows 8,Windows Server 2008 (SP2 or earlier), WindowsServer 2008 R2, Windows Server 2012
.NET 4.0Full Profile
Windows XP, Windows Vista (SP1 or earlier),Windows Server 2003Note: The .NET Framework 4 Client Profile is notsupported.
Teradata .NET Data Provider—You must install the Teradata .NETData Provider (13.10 or later) to use a Teradata native connection inToad.Toad Decision Point:The .NET Framework 4.0 Full Profile is required.Toad Intelligence Central:The .NET Framework is required. The version is dependent on theoperating system.
.NET 4.5 Windows 7, Windows 8, Windows Server 2008SP2, Windows Server 2008 R2, Windows Server2012
Toad Business Intelligence Suite Installation GuideRequirements
7
.NET 4.0Full Profile
Windows XP Pro SP3, Windows Server 2003,Windows Server 2008
DatabaseClient
The following requirements apply to Toad Data Point:DB2 ClientToad installs a DB2 10.1 client as part of the installation process.Existing 64-bit DB2 Client (DB2 native provider only)If you have a 64-bit DB2 client installed, you must install Toad usingthe ToadDataPoint_64bit_Client.exe.Oracle ClientToad can connect to Oracle using Direct Connect (no need for anOracle Client) or can connect using an Oracle Client or Oracle InstantClient. However, if you want to use LDAP, you must install an OracleClient. Toad supports 9i or later Oracle Clients and Oracle InstantClients.Notes:
l You cannot use Oracle Direct Connection in a cross-connectionquery.
l To use an Oracle connection in a cross-connection query, youmust install an Oracle Client (full install) or you must installthe Oracle Instant Client plus the Oracle ODBC driver.
AdditionalRequirements Toad Data Point Microsoft Internet Explorer 6.0 or later
Toad Decision Point Windows XP Requirements: MicrosoftVisual C++ 2008 SP1 runtimelibraries with ATL security update -download.
Toad IntelligenceCentral
To connect to ODBC data sources,install supporting ODBC drivers inthe same machine as Toad IntelligenceCentral. See following section onODBC drivers for details.MS C++ 2008 runtime libraries arerequired on Windows XP platforms.
Toad IntelligenceCentral Admin Console
Adobe PDF Reader and Internetaccess to open the Quick Start Guide.
Database and Data Source Requirements
Before installing Toad, ensure your system meets the following minimum requirements:
Toad Business Intelligence Suite Installation GuideRequirements
8
Native Database Server Toad Data Point supports the following databases:Oracle 9i, 10g, 11g, 11g R2Toad has been tested on Oracle Exadata 2.0 runningOracle database 11g R2.Limited support of SQL Server 2000 (Service Pack 3 orlater)Note: The following features are not available:
l Index Defragmentation
l Storage Management
l Performance Monitor
l Project Lucy Performance Analytics
l Altering procedures, functions, views in the Editor
l Version Control
SQL Server 2005 (Service Pack 2 or later) and SQL Server2005 ExpressSQL Server 2008 and SQL Server 2008 ExpressSQL Server 2008 R2 and SQL Server 2008 R2 ExpressSQL Server 2012 and SQL Server 2012 ExpressNotes:
l SQL Server Compact Edition is not supported.
l Storage Management is not available on SQLServer Express.
IBM DB2 for LUW 9.1, 9.5, 9.7, 10.1, 10.5IBM DB2 for z/OS 9, 10, 11Note: Toad may support IBM DB2 Express and SWE inaddition to listed above servers, but note that no testingwas performed on it.MySQL 4.1, 5.0, 5.1, 5.6Sybase ASE 12.5, 15.0.2, 15.0.3, 15.5Sybase IQ 15Sybase SQL Anywhere 12Teradata 12.0, 13.0, 13.10Access 2003, 2007, 2010Excel 2003, 2007, 2010
Toad Business Intelligence Suite Installation GuideRequirements
9
ODBC Database Server Toad Data Point allows you to create a connection to adatabase that supports an ODBC 3.0 or later driver. ODBCconnectivity provides basic querying capability, but maynot be as full-featured as a native connection in Toad.Toad has been tested on the following databases, using anODBC connection:
l DB2 for i5/OS V5R4 and IBM i 6.1
l Informix Dynamic 10.00, 11.0 (limited testing)
l Ingres Community Edition 2006 R2 on Windows32-bit (limited testing)
l Netezza Data Warehouse Appliance 4.6.6, 6.0
l PostgreSQL 8.3.4
l Vertica 4.1, 5.0, 5.1 (with 4.0, 4.1 ODBC driver),6.0 (with 6.0 ODBC driver)
Note: For a list of databases that are not supported, seeKnown Issues in the Release Notes.Toad Intelligence Central supports ODBC-compliantdatabases. See following section on ODBC drivers fordetails.
Cloud Database Service Toad Data Point:Oracle databases running on Amazon EC2SQL AzureNote: To be able to utilize a majority of Toadfunctionality, please grant VIEW DEFINITION on theSQL Azure databases you want to work with.SQL Server databases running on Amazon EC2Amazon RedshiftToad can manage Amazon RDS and any other cloud orservice offering compatible with MySQL.Toad Intelligence Central:Cloud database connections can be made via the AdminConsole with views and snapshots published to theIntelligence Central Server. This release supportsconnections to:
l Azure Table Services
l Cassandra
l SimpleDB
l Hadoop HBase
l MongoDB
Toad Business Intelligence Suite Installation GuideRequirements
10
l DynamoDB
Toad Data Point QuestData ServicesPremium ConnectionsandToad IntelligenceCentral Data SourceConnections
Toad Data Point and Toad Intelligence Central support thefollowing:
l Business Objects XI 3.0, 3.1 - Query as a WebService (QAAWS)
l Hive
l Oracle Business Intelligence Enterprise Edition 11g
l Salesforce.comNote: Toad does not support single sign-on forSalesforce.com at this time.
l Microsoft SQL Server Analysis Services
In addition, Toad Intelligence Central also supports thefollowing:
l Windows Azure DataMarket
l Oracle Business Intelligence Enterprise Edition 10g
l SharePoint Lists using Data Services overSharePoint Server 2010 and later via OData
l OData - Generic for any OData service
Toad Business Intelligence Suite Installation GuideRequirements
11
Virtualization
ApplicationVirtualization
On Toad Data Point, limited testing has been performed for CitrixXenApp 5.0 on Windows Server 2003 and Citrix XenApp 6.5 onWindows Server 2008 R2.
DesktopVirtualization(VDI)
Toad Data Point has been tested with Quest vWorkspace 7.0running on Windows XP Professional 32-bit (Service Pack 2).
ServerVirtualization
Toad Data Point has been tested with the following:
l Oracle VM 3.1 running on Red Hat Enterprise Linux 64-bitwith Oracle 11gR2
l Oracle VM 2.2 running on Windows 2008 32-bit withOracle 11gR2
Note: Toad may work in virtualization environments other than the ones in which it wastested.
User RequirementsOnly Windows Administrators and Power Users can install Toad.
Note: The following exceptions exist for Power Users:
l A Power User cannot install Toad on a computer running Windows Vista Enterprise.This is a Windows limitation because Vista does not support Power User mode.
l (DB2 only) A Power User can install Toad as long as this user belongs to theDB2ADMNS or DBUSERS group.
If an Administrator installs Toad, the Administrator can share the Toad shortcut icon on thedesktop and menu items with any user—a Power User, Restricted User, Vista standard user—on the computer.
If a Power User installs Toad, a Restricted User cannot do the following:
l Associate file extensions.
l View the Toad shortcut icon on the desktop or the Toad menu options in theWindows Start menu. As a workaround, Restricted Users can create a shortcut to Toadfrom the install directory and place the shortcut on their desktop.
Installation
Install Toad Business Intelligence SuiteYou can install any or all of the products included in the Toad Business Intelligence Suiteusing the Toad Business Intelligence Suite Installer.
Toad Data Point users with 64-bit IBM DB2 Client
For Toad Data Point users who have a 64-bit IBM DB2 Client currently installed, an installerthat includes the 64-bit DB2 Client (ToadDataPoint_64bit_Client.exe) is available throughthe Support Portal at www.quest.com/support.
Microsoft .NET Framework Requirements
When running the installer, if your system does not meet the .NET Framework requirementfor the product currently installing, installation stops and you are prompted to download andinstall the required version of .NET. See System Requirements (page 5) for the .NETrequirements for each product.
Notes: After installing the Intelligence Central server, the installer automatically installs acopy of Toad Data Point Professional to enable the execution of Automation scripts and toenhance the ODBC library available to Toad Intelligence Central.
To install Toad Business Intelligence Suite
1. Run the ToadBISuiteInstaller.exe.
2. Click Install (Upgrade) next to the product you would like to install or upgrade.
3. The installer for that individual product opens. Complete the installation steps forthe product.
4. After the product is installed, select another product to install by clicking its Install(Upgrade) button in the open Toad Business Intelligence Suite installer.
5. Repeat until all desired products are installed.
To see detailed installation instructions for an individual product, see the product'sInstallation Guide available through the Support Portal at www.quest.com/support.
To install the Toad Intelligence Central Server
1. Run the ToadBISuiteInstaller.exe.
2. Click the Install (Upgrade) button beside Toad Intelligence Central. The ToadIntelligence Central Setup Wizard opens.
3. Accept the license agreement when prompted.
2
Toad Business Intelligence Suite Installation GuideInstallation
13
4. If connections to data sources outside your organization need to go through a proxyserver, provide details of the proxy server.
Field Description
Proxy host address Type the DNS or IP address of the proxy server withinyour organization. HTTP and HTTPS secure proxyservers are supported.
Proxy port number Type the port on which the proxy server operates. Thestandard proxy port number is 8080. Sometimes port 80is used. Less commonly an entirely different port maybe used.
5. Enter port numbers. Make a note of the Intelligence Central server port number.
Field Description
Intelligence Centralserver Port number
This port connects Toad Intelligence Central to ToadIntelligence Central Admin Console. Make sure younote down what the port number is. You will berequired to enter this number into Toad IntelligenceCentral Admin Console in order to connect to ToadIntelligence Central.
Internal port number This is an internal port used by Toad IntelligenceCentral and should only be changed in the case of portnumber conflicts.
Application serverport number
This port can be used to connect Toad IntelligenceCentral to client applications. Clients may be used topublish visualizations to Toad Intelligence Central andconsume data from Toad Intelligence Central.
6. Create a password to connect to Toad Intelligence Central. This is theadministrator password to the Intelligence Central server in Toad IntelligenceCentral Admin Console.
7. Accept or change the installation folder.
8. Accept or change the data folder.
Note: All Toad Intelligence Central data will be stored in the data folder. The datafolder will potentially grow quite large if there are lots of snapshots and datasets.
Toad Data Point
If not installed already, the current release of Toad Data Point is installed after ToadIntelligence Central. The current release of Toad Data Point is required to take advantage ofthe latest Automation Script enhancements. If an earlier version of Toad Data Point is already
Toad Business Intelligence Suite Installation GuideInstallation
14
installed, then it will not be replaced. Both installations of Toad Data Point will run side byside.
Additional Steps After Installing Toad Intelligence Central Server
Install ODBC drivers
For the data source type you will be using, ensure that the following ODBC drivers andnecessary client files are installed on the same computer as Toad Intelligence Central.
Note: In order for Toad Data Point users to successfully publish data to Intelligence Central,the Intelligence Central server must have the same ODBC driver, DSN name, and necessaryclient files that exist on the Toad Data Point user’s computer. These files are used by ToadData Point to create the data source connection.
DB2 DB2 ODBC driver (included in the Toad Data Point install)DB2 clientDB2 catalog
MySQL MySQL Connector/ODBC 5.1.6
Oracle Oracle (32bit and 64 bit): 11g instant client plus ODBC supplementOCI clientTnsnames.ora file
SQL Azure SQL Server Native Client 10.0
SQL Server SQL Server Native Client 10.0
Sybase Sybase ODBC driver (included in the Toad Data Point install)
Teradata Teradata ODBC driverTeradata .Net Data Provider
Other ODBC 32-bit, System DSN
If the proxy server is authenticated
Follow this step after Toad Intelligence Central is installed if the machine on which ToadIntelligence Central is installed connects to the Internet via a proxy server and the proxyserver is authenticated.
Execute this SQL statement. You can execute this statement in Toad Intelligence CentralAdmin Console.
INSERT INTO hub_information_schema.hub_proxies VALUES ('http','http://proxyAddress:proxyPort/', 'username', 'password');
Toad Business Intelligence Suite Installation GuideInstallation
15
Variable Value
http The protocol under which the proxy server operates. The protocol maybe http or https or both http and https. If both http and https are usedthen execute the SQL statement twice, once per protocol.
proxyAddress The IP address of the proxy server.
proxyPort The port on which the proxy server operates.
username The username to the proxy server.
password The password to the proxy server.
Enter License KeyTo enter a license key
1. Use one of the following methods to enter your license key:
l In Toad Data Point, select Help | Licensing.
l In Toad Decision Point, select Help | Enter License Key.
l In Toad Intelligence Central Admin Console, select Help | Licensing. Thenclick Enter License.
2. Enter your license key and the site message that was included with your license key.
User RegistrationDuring installation you have the opportunity to register with Quest Software as a Toad user.Just enter your e-mail address and job role in the Product Registration page of the Installer.
Registration has its benefits. You will get product updates, the monthly Toad WorldNewsletter, and a Tips and Tricks guide, among other benefits.
After you register, Quest sends a copy of the Toad World Newsletter to the e-mail addressyou provided. In addition, you will be registered at the Quest Software Support Portal athttp://support.quest.com.
Silent Installation
Install Suite Products SilentlySilent installation provides a convenient method for deploying the Toad BusinessIntelligence Suite products to multiple machines. With some customization, you can alsodeploy the license key and settings at the same time.
Use each product's .msi file to perform a silent install for that product.
Install Toad Data Point Silently
Silent Installation Prerequisites
Before you perform a silent installation, you must install the following software on everycomputer where you are installing Toad:
l Microsoft .NET Framework 4.5
Silent Installation Using the Microsoft Installer
Perform Silent Installation Using MSI
To perform a silent install using msi
1. For a standard installation with all features enabled, run the ToadInstaller.msi usingthe following command:
msiexec /i “ToadInstaller.msi” /q
For a read-only installation with create, alter, and drop functionality disabled, enterthe following command:
msiexec /i “ToadInstaller.msi” /q READONLY=TRUE
You can customize command-line options and overrides for your installation similarto the following:
msiexec /i “ToadInstaller.msi” INSTALLDIR= “Drive:\your_install_path” /q USERNAME=”someone” COMPANYNAME=”your_company” ALLUSERS=1
3
Toad Business Intelligence Suite Installation GuideSilent Installation
17
Command-Line Options
The following MSIEXEC command-line options are used in this example:
Option Description
/i Run the installation.
/q Specify the user interface (UI) that displays during installation.You can append other options, such as n to hide the UI or bto hide the Cancel button during the installation.
Note: All command-line options are case-insensitive. Seehttp://msdn2.microsoft.com/en-us/library/aa367988.aspx for a complete list ofcommand-line options.
Toad Default Installation Option Overrides
You can specify the following values to override Toad’s default installation options.Enclose each value in double quotations.
Option Description
INSTALLDIR (Optional) Specify the absolute path for the directory inwhich you want to install Toad. If you do not include thispath, the installation program defaults to: C:\ProgramFiles\Quest Software\Toad Data Point <version number>.
ALLUSERS (Optional) Specify one of the following:
l For a per-machine installation, specify 1. Thisvalue allows any user to use the Toad shortcut onthe desktop after the installation completes.
l For a per-user installation, enter the empty stringvalue (“”) This value allows only the userspecified for USERNAME (and the user thatinstalled Toad) to see the Toad shortcut on thetarget desktop. If USERNAME is omitted, only theuser that installed Toad sees the shortcut.
Note: If you do not specify this property, the installationprogram defaults to a per-user installation.
USERNAME (Optional) Specify the user that intends to use Toad onthe target computer.Notes:
l If ALLUSERS is omitted or defined with theempty string value (""), only the user specifiedhere (and the user that installed Toad) can see the
Toad Business Intelligence Suite Installation GuideSilent Installation
18
Option Description
Toad shortcut on the desktop after the installationcompletes.
l If ALLUSERS is omitted or defined with theempty string value ("") and you omit theUSERNAME option, only the user that installedToad sees the Toad shortcut on the desktop.
l If ALLUSERS is 1, the USERNAME value isignored during installation.
COMPANYNAME (Optional) Specify the name of the company that ownsthis installation.
Notes:
l All default installation option overrides are case-sensitive.
l Enclose all values (except for the ALLUSERS value) in double quotations.
Note: During installation, if the user overrides the default installation directory location, thedirectory path cannot contain Unicode characters. This is due to the fact that we install aDB2 LUW client in the user specified Toad Installation directory and the DB2 installationdoes not support such characters.
Create Transform (MST) Files
You can create a Microsoft transform (.mst) file that deploys the license key, custom settings,and connections for users when performing a silent install using the .msi file. You can alsouse the .msi file to perform a basic silent install using the default directory (or install to adifferent directory) and to specify command-line options and default installation overrides.See "Perform Silent Installation Using MSI" (page 16) for more information if you are notcreating a transform file.
Note: (MSI installs on Windows Vista and 7) If you are using MSI to install Toad onWindows Vista or 7 with UAC enabled, you can install a file that adds a "Run asadministrator" option when right-clicking the MSIfile: http://www.symantec.com/connect/downloads/msi-run-administrator-context-menu-vista.
The following procedure uses the Wise Installer to create the transform file.
To create a transform file that includes custom Toad settings
1. Save and install the ToadInstaller.msi file on a computer where the Wise for WindowsInstaller is installed. After customizing Toad settings, you will use the Wise Installerto create the transform file.
Toad Business Intelligence Suite Installation GuideSilent Installation
19
2. Open Notepad, and do the following:
a. Enter the license key in the first line.
b. Enter the site message in the second line. The file should look similar to thefollowing:
AAABBBBCCCCCCEDXDWLMV0WJ9-123-45678-B2
Quest Software
c. Save the file with license.key as the file name in the Toad install directory.Make sure the file extension is .key not .txt.
3. Launch Toad. The application should open without prompting you to enter alicense key.
4. Select Tools | Configuration Wizard from the Toad menu and complete theConfiguration wizard. This wizard creates an initial settings file (Settings.xml).
5. Select Tools | Options from the menu in Toad to open the Options window.
6. Select each page in the window and set any options you want to deploy. Theseoptions create a module settings folder and files.
7. Select View | Connection Manager from the menu in Toad to open theConnection Manager.
8. Create any connections you want to deploy.
9. Exit Toad. Upon exiting, a Connections file is created.
10. Create the Microsoft Transform file, using any appropriate tool. The following stepsdescribe how to use the Wise for Windows Installer to create the file.
a. Select File | New.
b. Select Custom Templates under Categories, and then select the Transformtemplate in the New Installation File window.
c. Select the ToadInstaller.msi file in the Select the .MSI file to base thistransform on window.
d. Save the project.
e. Select Files from the Feature Details view.
f. Locate the following files and click Add to add them to the project:
File to Add Location
Settings.xml This file is located in the following directory:
l Windows XP, Windows Server 2003—C:\Documents andSettings\username\Application Data\QuestSoftware\ Toad Data Point <version number>.
Toad Business Intelligence Suite Installation GuideSilent Installation
20
File to Add Location
l Windows Vista, Windows Server 2008,Windows 7—C:\Users\username\AppData\Roaming\ QuestSoftware\Toad Data Point <version number> .
ModuleSettingsfolder and files
This folder and related files are located in thefollowing directory:
l Windows XP, Windows Server 2003—C:\Documents andSettings\username\Application Data\QuestSoftware\Toad Data Point <version number>\ModuleSettings.
l Windows Vista, Windows Server 2008,Windows 7—C:\Users\username\AppData\Roaming\ QuestSoftware\Toad Data Point <versionnumber>\ModuleSettings.
Connections.xml This file is located in the following directory:
l Windows XP, Windows Server 2003—C:\Documents andSettings\username\Application Data\QuestSoftware\Toad Data Point <version number> .
l Windows Vista, Windows Server 2008,Windows 7—C:\Users\username\AppData\Roaming\ QuestSoftware\Toad Data Point <version number>.
g. Save the project and compile it to create the transform (MST) file.
11. Perform a silent install. See "Perform Silent Installation Using MSI" (page 16) for moreinformation.
Appendix: Contact Quest
Contact Quest SupportQuest Support is available to customers who have a trial version of a Quest product or whohave purchased a Quest product and have a valid maintenance contract. Quest Supportprovides unlimited 24x7 access to our Support Portal at www.quest.com/support.
From our Support Portal, you can do the following:
l Retrieve thousands of solutions from our online Knowledge Base
l Download the latest releases and service packs
l Create, update and review Support cases
View the Global Support Guide for a detailed explanation of support programs, onlineservices, contact information, policies and procedures. The guide is available at:www.quest.com/support.
Toad Community
Get the latest product information, find helpful resources, and join a discussion with the ToadBusiness Intelligence team and other community members.
Join the Toad Business Intelligence Suite communities.
l Toad Business Intelligence Suite community:http://www.toadworld.com/products/toad-bi-suite/default.aspx
l Toad Data Point community: http://www.toadworld.com/products/toad-data-point/default.aspx
Toad Business Intelligence Suite Installation GuideContact Quest Support
22
Contact Quest Software
Email [email protected]
Quest Software, Inc.World Headquarters5 Polaris WayAliso Viejo, CA 92656 USA
Web site www.quest.com
See our web site for regional and international office information.
About Quest SoftwareEstablished in 1987, Quest Software (Nasdaq: QSFT) provides simple and innovative ITmanagement solutions that enable more than 100,000 global customers to save time andmoney across physical and virtual environments. Quest products solve complex IT challengesranging from database management, data protection, identity and access management,monitoring, user workspace management to Windows management. For more information,visit www.quest.com.
IndexA
About Business Intelligence Suites 4
application virtualization 11
C
contact Quest Software 22
contact support 21
D
desktop virtualization 11
I
install 12
silent 16
L
license keys 15
M
mst file 18
O
ODBC, install drivers 12
R
requirements
system requirements 5
S
server virtualization 11
silent install 16
create transform file 18
Microsoft installer (MSI) 16
system requirements 5
T
transform file 18
V
virtualization support 11
