Upload
trinhtuyen
View
215
Download
0
Embed Size (px)
Citation preview
��ea� ����i��, ��ea� �u��i��
Kick plates-Toe Boards
Lockinex®
Complies to BS EN ISO 14122-3:2001
Satis�es BS 4592-0:2006+A1:2012
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
Lockinex
INTRODUCTION
The Lockinex range of Kick Plate/Toe Board,fixing brackets and joints, incorporatestwo types of design.The Traditional “Flat” plate and our newlydeveloped “C” Section.Both products enable the quick and easyinstallation of an industrial robust system.Removing the necessity of detailed drawings,welding and fabrication, these products areavailable directly from stock.
APPLICATION
Regulatory requirements will dictate the use ofa safety Kick Plate/Toe Board.Many installations include, elevated walkways,edges of mezzanine floors, roof perimeter (See the Lockinex Roof Guardrailsystems section).
COMPOSITION, MANUFACTURE
Manufactured in mild steel, theKick Plate/Toe Boards and bracketsare then galvanised To BS EN 1461:2009
DESIGN
The unique designs of brackets and kick plate/Toe Board, ensure completecompliance with current UK & Europeanregulations.
Page 2
of 6
Forginex 11 used at London City Airport
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
150
3mtr lengths-Stock Items (6mtr lengths to order)
6
KP11 - 3mtr Length (stock item)-Weight is approximately 13kg.
KP12 - 6mtr Length (made to order)-Weight is approximately 26kg.
This product satis�es the CEN harmonised European standard BS EN ISO 14122-3:2001 when used with Lockinex Key Clamps and/or Ball Type Posts with horizontal rails set at 500mm centres max.
Galvanised 150mm x 6mm toe-board. Use KP07 and KP08 to make joins and corners.
2 x 8mm suspension holes used for the galvanising process.These holes are not used for any �xing, fastening or assembly
KP11- 3mtr Length (Stock item)KP12- 6mtr Length (Made to order)
3mm Thick steel
27 Nominal
16 Nominal
54 Nominal
Stainless steelgrub screw
KP07
90 Degree corner joiner. For use with KP11 and KP12 toe-board.
80 Nominal
27 Nominal
Stainless steelgrub screw
30 Nominal
16 Nominal
3mm Thicksteel
Straight joiner. For use with KP11 and KP12 toe-board.
KP08
Page 3
of 6
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Stainless steel grub screw.The KPO2 comes with 2 screws. One screw is 9mm long and the other is 16mm long. Use the longer to suit 42.4mm dia tube and the shorter one to suit 48.3mm dia tube.
58 Nominal
3mm Thick steel
25 Nominal
65 Nominal7 Nominal
12 Nominal
KP01 To suit 33.7mm dia. tubeKP02 To suit 42.4mm & 48.3mm dia. tube
Wraps around the upright post and retains KP11/KP12.
Wraps around the upright post and retains KP11/KP12. KPO5 consists of 2 grub screwswith di�erent lengths. Use longest grub screw to suit 42.4mm dia tube and shortest to suit 48.3mm dia tube.
Stainless steel grub screw.The KPO5 comes with 2 screws. Use the longer screw to suit 42.4mm dia tube and the shorter one to suit 48.3mm dia tube.
KP04 To suit 33.7mm dia. tubeKP05 To suit 42.4mm & 48.3mm dia. tube
Wraps around the upright post and retains KP11/KP12.
Wraps around the upright post and retains Forginex-11.
Page 4
of 6
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
25
150
3mtr lengths or 6mtr lengths
FORGINEX-11A-3mtr Length Weight is approximately 13kg.FORGINEX-11-6mtr Length Weight is approximately 26kg.Galvanised steel toe-board. Use Lockinex-07 to make in-line joins and corners or Lockinex-06 to cap o� the end.
This product satis�es the CEN harmonised European standard BS EN ISO 14122-3:2001 when used with Lockinex Key Clamps and/or Ball Type Posts with horizontal rails set at 500mm centres max.
Forginex-11A-3mtr Length
22 Nominal
25
24 Nominal
150Nominal
146 Nominal
Used to neatly cap the end of the Forginex 11.
Lockinex-06
146 Nominal
150Nominal
120 Nominal
Allows obtuse angles to be achieved
22 Nominal
40
24 Nominal
57
180
Lockinex-07
Joins the end of two Forginex 11, constructs a �exible joint.
Forginex-11 -6mtr Length
Page 5
of 6
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
11
12
100
3058
90
18mm Dia Holes
90
45
A13-7 To suit 42.4mm dia. tubeA13-8 To suit 48.3mm dia. tube
Generally used with KP11/KP12. Can also be used with Forginex 11.
18mm Dia.
Inserts into Forginex 11, a�x to either A12 Lockinex Key Clamp Base Plate, or HS1 base plate (The HS1 base plate is of a welded construction. This is a component of the Lockinex “Ball Type” Handrail System).
The kick plate/Toe Board & Lockinex-02 can be drilled through and either boltedto retain, or use self tapping screw to retain.
Lockinex-02
2
120 Nominal
15 Nominal
20Nominal
35 Nominal
A12 Base plate
HS1 Base plate
Page 6
of 6