Tool Storage Solutions - Fall 2015 / Spring 2016

THE JOB’S NOT FINISHED UNTIL YOU PUT YOUR TOOLS AWAY!

2

PIT BOXES / ROAD BOXES

70” 7 DRAWER/2 COMPARTMENT PIT BOXES• 2 Large storage compartments have 1 adjustable shelf in each to store large items• Heavy duty pneumatic tires and hand-controlled disc brake• Raise and Release drawer handles lock each drawer in place for secure traveling;

full-extension, ball-bearing drawer glides are load rated 100-200* lbs per drawer• Stainless steel top provides a heavy duty work surface no matter where you go• Overall dimensions: 70”W x 24”D x 48”H, • Tool Box dimensions: 64”W x 24”D x 43.5”HThe newest Extreme Tools® mobile tool storage is here! With seven big drawers and two large side compartments, you can hit the road with everything you need! The heavy duty wheels and disc brake make traveling with your tools easy.

EXTTXPIT7009BK - BLACKEXTTXPIT7009RD - RED

EXTTXPIT7009BL- BLUE

ASK YOUR DEALERABOUT TECHNICIAN

FINANCING

3

TRIPLE BANK TOOL BOXES

76” 12 DRAWER PROFESSIONAL ROLLER CABINETS• 12 Drawers—2 extra wide, 1 extra deep and Vertical Power Tool Drawer with peg board, 2 heavy duty adjustable shelves, built-in power strip

• Full-extension, ball-bearing glide drawers for smooth opening and closing load rated 300--600* lbs per drawer• Double steel wall drawer fronts and back panels provide extra strength and stability so your drawers will never warp, twist or sag

• Double channel spot welded support brackets on underside of each drawer make your drawers the strongest, sturdiest drawers possible

• Super, heavy-duty 11 gauge steel frame makes it one of the strongest boxes on the market

The Extreme Tools 76” Professional Roller Cabinet has enough room to store even your biggest tools! With 12 large drawers, it is easy to keep your tools organized. Open the huge Vertical Power Tool Drawer to find 2 adjustable shelves, peg board for hanging tools and power strip for charging your power tools.

EXTEX7612RCBK - BLACKEXTEX7612RCBL - BLUE

BUILT-INPOWERSTRIP

4


SIDE CABINETS FOR EXTREME TOOLS 72” TOOL BOX SERIES• Support bracket mounts under toolbox to give added support• 2 adjustable roller bearing shelves• 4 drawers with roller bearing glides• Cabinet and door can be rotated from left or right side• No visible spot welds on side cabinet front and drawers

Cabinet features an high gloss powder coat finish and theft proof lock system. Dimensions: 24”W x 30”D x 63-3/4”H.

EXTEX2404SCBK - BLACKEXTEX2404SCBL - BLUE

72” 18 DRAWER TRIPLE BANK ROLLER CABINETS• 50,343 cubic inches of storage• Six 6” x 2” casters rated at 950 lbs. each (4 swivel, 2 rigid)• Full extension drawers• Ball bearing drawer slides with 250-lb. load rating per set• Stainless steel top

Handle included fits either end. High gloss powder coat finish. Drawers with ball bearing glides, 18 drawers - one extra wide and one extra deep.


5


72” 19 DRAWER ROLLER CABINETS• Patent-pending, quick release self-latching drawer pulls keep drawers closed even when moving• Drawers use ball bearing slides load rated 100-200*lbs per drawer (double slides)• 3 Extra long drawers with added support bar to accommodate large tools• Full-width, extruded, polished aluminum drawer pulls• Durable high gloss powder coat finish

Extreme Tools® RX Series RX722519RC 72” 19 Drawer Roller Cabinet is the latest in our RX Series. This professional quality tool box features 3 extra long drawers with a support bar to provide strength and prevent warping or twisting. Patent-pending, self-latching, quick release drawer pulls keep drawers closed even when moving. Each drawer uses full-extension ball bearing slides that let you load 100 to 200 lbs per drawer (drawers with double slides.) Includes drawer liners. This huge roller cabinet gives you loads of space at an affordable price with the assurance of Extreme Tools® quality.

EXTRX722519RCBL - BLUEEXTRX722519RCBK - BLACK

EXTREME TOOLS 19” 7-DRAWER SIDE BOXES • Big 19” wide and a full 25” deep• Patented, Quick Release self-latching drawer pulls• Drawers load rated 100-200* lbs per drawer - *drawers with double slides• Full-extension ball bearing slides used on drawers• Fits RX Series RX722519RC and RX552512RC

RX Series 19” wide side box gives you the extra room you need for additional tool storage. The 7-drawer side box is a full 47” tall and fits on the RX722519RC or RX552512RC roller cabinets. Full-extension 100 lb slides let you load up your drawers - deep drawers with double slides hold up to 200 lbs of your tools! It’s the perfect addition to your tool storage system.

EXTRX192507SBBL - BLUEEXTRX192507SBBK - BLACK

6


MST7235CLLIMITED EDITION 72” CART LOCKER AND 35” FLIP-TOP SERVICE CART COMBO• 35” Service Cart fits inside 72” Cart Locker• HMC High Security Tubular Locking System• Removable, 500 mm ball-bearing drawer glides• Heavy-duty 6” x 2” Roller Bearing Casters: 4 Swivel with Locking

Levers and 2 Fixed. 550 lb. capacity per caster• Large, brushed Stainless Steel work surface• Heavy-duty, contoured grip push handle & full-length

aluminum drawer pulls• 3.2 mil epoxy-polyester powder coat satin paint finish• Metal Thickness: Service Cart - Lid 1.5 mm, Frame 1.2 mm, Drawers 1.0

mm, Legs 2.0 mm; Cart Locker - SS Top 0.8 mm, Cabinet Top 1.2 mm, Cabinet Frame 1.2 mm, Drawers 1.2 mm

• Maximum Capacities: Service Cart - Slide Pair 88 lbs./pair, Casters 330 lbs./caster; Cart Locker - Slide Pair 75 lbs.; Casters 550 lbs.

• Service Cart Dimensions: 31” W x 20-1/2” D x 39-1/2” H, Weighs 184 lbs.; 2 Small Drawers 11-5/8” W x 17-1/4” D x 2-1/4” H; 4 Medium Drawers 25-3/8” W x 17-1/4” D x 2-1/4” H; 1 Large Drawer 25-3/8” W x 17-1/4” D x 5-5/8” H; Top Till 30” W x 19” D x 7-1/2” H

• Cart Locker Dimensions: 72” W x 26-7/8” D x 47-1/2” H, Weighs 419 lbs.; 1 Full-Width Drawer 16-3/8” W x 20-1/2” D x 2-3/8” H; 4 Full-Width Drawers 16-3/8” W x 20-1/2” D x 3-3/8” H; 1 Full-Width Drawer 16-3/8” W x 20-1/2” D x 5-1/4” H; 1 Full-Width Drawer 16-3/8” W x 20-1/2” D x 7-7/8” H; 2 Door Cart Locker 41-1/2” W x 25-3/4” D x 44” H

MST7217HBK17 DRAWER ROLLER CABINET WITH STAINLESS STEEL TOP - 72”W X 30”D X 45”H• Full extension ball bearing drawer slides with 175 lb. load rating

per set; oversized drawers have double slides• Heavy duty 1.0mm brushed stainless steel work surface over

38mm MDF board• HMC high security tubular locking system• More than 5,000 lbs. total caster capacity; 6” x 2” spring loaded

casters with 900 lb. load rating, 2 rigid; 4 swivel with lock• Double wall construction

This 72” 17 drawer roller cabinet features heavy gauge steel construction and provides an immense amount of storage space. The 6” x 2” spring loaded casters provide the mobility needed to maneuver this massive unit around your facility, while the heavy duty stainless steel work surface provides you with over 2,000 square inches of work area.

7


75” 15 DRAWER TOOL CABINET, W/ROLLER BEARINGS• Ball bearingslides on all drawers • Double slides on all 8” drawers (on 53” side only)• High gloss powder coat scratch resistant paint • Six 6” x 2” casters with load rating of 900 lbs each• Pre-cut anti skid drawer liners • Heavy duty 14 gauge caster channel• Chrome plated handles on both sides of cabinet • Full width aluminum drawer pulls• 3/8” Rubber top mat working surface • Drawers load rated at 100-lb.• Long top drawer, double sliders, with a load rating of 185-lb.• Three bottom drawers doubled sliders, with a load rating of 185-lb.• Aluminum corner trim provides added protection• Product Dimensions: 75-1/4” W x 24-1/2” D x 39-3/8” H

ITBVRB7515RD - REDITBVRB7515BK - BLACKITBVRB7515BU - BLUE

EXTREME TOOLS 19” 3-DRAWER AND 2-SHELF SIDE LOCKERS• Big 19” wide and a full 25” deep and 60.75” high includes 2 shelves and 3 drawers• Drawers load rated 100 lbs per drawer• 2 shelves in the locker section allow for lots of extra space for big and bulky items• Full-extension ball bearing slides used on drawers• Fits RX Series RX722519RC and RX552512RC

RX Series 19” wide side box gives you the extra room you need for additional tool storage. The 3-drawer and 2-shelf side locker is a big 60.75” tall and fits on the RX722519RC or RX552512RC roller cabinets. Full-extension 100 lb slides let you load up your drawers It’s the perfect addition to your tool storage system.

EXTRX192503SLBL - BLUEEXTRX192503SLBK - BLACK

8

DOUBLE BANK TOOL BOXES

56" PROFESSIONAL HD SERIES 10 DRAWER CHEST• Full-extension 200 lb. ball bearing drawer slides

support drawers full of tools• Smooth-operating gas struts safely support the lid• SolidTrax™ drawer assembly adds stability and strength• Patented Posi-Latch® drawer latching system holds drawers

closed and prevents accidental opening• Full-width lid stiffener adds stability• Cable-activated tubular keyed locking system protects

valuable tool collections• Powder coat paint provides durable surface• Non-slip drawer liners protect surfaces and hold tools in place• Dimensions: 56" x 30" x 23.75"• 10 year limited warranty protects against defects

This 10 drawer chest allows the storage of almost 50% more tools in the same compact footprint, and stores tools of varying sizes and lengths. The convenient top tray accommodates long tools.

WATPCH-561030BK - BLACKWATPCH-561030RD - RED

56" PROFESSIONAL HD SERIES 12 DRAWER CABINET• Full-extension 200 lb. ball bearing drawer slides

support drawers full of tools• Double slides on 5" or deeper drawers support 400 lbs.• Patented Posi-Latch® drawer latching system holds

drawers closed and prevents accidental opening• SolidTrax™ drawer assembly adds stability and strength• Drawer dividers can be configured in any way to help

organize small tools or parts• Cable-activated tubular keyed locking system protects

valuable tool collections• Rugged roll cage construction supports heavy

loads without racking• Powder coat paint provides durable surface• Non-slip drawer liners protect surfaces• Heavy-duty 6" x 2" casters support 5,200 lbs.• Dimensions: 56” x 30” x 42.25”• 10 year limited warranty protects against defects

WATPCA-561230BK - BLACKWATPCA-561230RD - RED

DRAWER DIMENSIONS

Quantity Width Depth Height

1 51.38" 27.5" 4.13"

2 23.38" 27.5" 2"

4 23.38" 27.5" 3.13"

3 23.38" 27.5" 4.13"

1 23.38" 27.5" 8.5"

1 23.38" 27.5" 12.88"

DRAWER DIMENSIONS


4 23.75" 27.5" 2"

4 23.75" 27.5" 3.13"

2 23.75" 27.5" 4.13"

9


52" 11 DRAWER TOOL CABINET WITH LINERS AND UPGRADED CASTERS• Full-extension 75 lb. ball bearing drawer slides• Includes non-slip drawer liners• Patented Posi-Latch® latching system• Rugged sidewall-post construction• Upgraded casters offer 3,200 lb. load rating• Dimensions: 51.5"W x 20"D x 41"H


DRAWER DIMENSIONS


1 47.25" 18.5" 4.13"

2 22.38" 18.5" 2"

2 22.38" 18.5" 3.13"

6 22.38" 18.5" 6.38"

41" 11 DRAWER TOOL CABINET WITH LINERS AND UPGRADED CASTERS• Full-extension 50 lb. ball bearing drawer slides• Internal keyed locking system• Rugged internal construction• Includes non-slip drawer liners• Upgraded casters provide 1,100 lb. load rating• Dimensions: 41"W x 18"D x 37.3"H

WATWCA-4111BK - BLACKWATWCA-4111RD - RED

DRAWER DIMENSIONS


1 36.75" 16.5" 4.13"

1 22.38" 16.5" 2"

4 22.38" 16.5" 3.13"

1 22.38" 16.5" 6.38"

1 11.75" 16.5" 2"

2 11.75" 16.5" 3.13"

1 11.75" 16.5" 12.75"

10


46" PROFESSIONAL HD SERIES 10 DRAWER CHEST • Full-extension 200 lb. ball-bearing drawer slides• Smooth-operating gas struts safely support the lid• SolidTrax™ drawer assembly adds stability and strength• Patented Posi-Latch® drawer latching system holds drawers

closed and prevents accidental opening• Full-width lid stiffener adds stability• Cable-activated tubular keyed locking system• Powder coat paint provides durable surface• Non-slip drawer liners protect surfaces• Dimensions: 46"x 24"x 23.75"• 10 year limited warranty protects against defects

46" PROFESSIONAL HD SERIES 12 DRAWER CABINET • Full-extension 200 lb. ball-bearing drawer slides• Double slides on 5" or deeper drawers

support 400 lbs.• Patented Posi-Latch® drawer latching system holds

drawers closed and prevents accidental opening• SolidTrax™ drawer assembly adds stability and strength• Drawer dividers can be configured in any way to help

organize small tools or parts• Cable-activated tubular keyed locking system• Rugged roll cage construction supports heavy

loads without racking• Powder coat paint provides durable surface• Non-slip drawer liners protect surfaces• Heavy-duty 6" x 2" casters support 3,500 lbs.• Dimensions: 46" x 24" x 42.25"• 10 year limited warranty protects against defects

WATPCH-461024BK - BLACKWATPCH-461024RD - RED

DRAWER DIMENSIONS


1 41.88" 21.5" 4.13"

1 23.38" 21.5" 2"

2 23.38" 21.5" 3.13"

2 23.38" 21.5" 4.13"

1 23.38" 21.5" 8.5"

1 14.38" 21.5" 2"

2 14.38" 21.5" 3.13"

1 14.38" 21.5" 4.13"

1 14.38" 21.5" 12.88"

DRAWER DIMENSIONS


2 23.38" 21.5" 2"

2 23.38" 21.5" 3.13"

1 23.38" 21.5" 4.13"

2 14.38" 21.5" 2"

2 14.38" 21.5" 3.13"

1 14.38" 21.5" 4.13"



KDT8315742” 11 DRAWER ROLLER CABINET• Innovative Trigger Lock drawer system allows drawers

to naturally open and close• Heavy duty steel gauge for required strength and durability• Durable powder coating with additional full polish lacquer coating• Double Ball Bearing construction offers exceptional load capacity

and easy slide action• 5” X 2” heavy duty locking casters for easy maneuvering

KDT8315642” 8 DRAWER TOP CHEST• Innovative Trigger Lock drawer system allows

drawers to naturally open and close• Heavy duty steel gauge for required strength and durability• Durable powder coating with additional full polish lacquer• Double Ball Bearing construction offers exceptional load

capacity and easy slide action• 5” X 2” heavy duty locking casters for easy maneuvering

KDT8315853” 9 DRAWER ROLLER CABINET• Innovative Trigger Lock drawer system allows drawers

to naturally open and close• Heavy duty steel gauge for strength and durability• Double Ball Bearing construction offers exceptional

load capacity and easy slide action• Durable powder coating with additional full polished

lacquer coating• 5” X 2” heavy duty locking casters

11

12


41” DELUXE PORTABLE WORKSTATIONS (TOOLS NOT INCLUDED)• Organize your tools and take them with you: wrenches, SAE and metric

sockets, screwdrivers, ratchets, extensions, pliers, drill bits, specialty tools (tools not included)

• Two drawers with storage trays built into drawer fronts • Power tool rack compartment with built-in power strip• Pull-out side shelf gives you a convenient work surface; Pull-out

side drawer holds up to 17” laptop computer (computer not included)• 16 gauge steel construction with welded seams; textured finish

and weather stripping create tight seal against dust, moisture and the elements

The Extreme Tools 41” Deluxe Portable Workstation has everything any professional or handyman could want. It is an incredibly versatile tool storage and work center all-in-one. Organize your tools, charge your power tools, store and charge your computer and work on the pull-out shelf while staying in one spot!

EXTPWS4105TXBK - TEXTURED BLACKEXTPWS4105TXRD - TEXTURED RED

41” DELUXE 11 DRAWER 24” DEEP ROLLER CABINETS• Textured, weather-resistant finish• Drawers use ball bearing glides load rated 100-200* lbs / drawer (*dual sets of glides)• 5” x 2” Casters (2 swivel with brakes -2 rigid) load rated 550 lbs per caster• Full width polished aluminum raise and release drawer pulls• Tubular theft-resistant lock and keys• Dimensions: 41-1/2”W x 24”D x 41-1/2”H. Whether you want a really roomy 41” roller cabinet that’s a full 24” deep or you want a way to make your Extreme 41” Deluxe Portable Workstation even more portable, the PWS4124TXRC Extreme 41” 11 Drawer Extra Deep Roller Cabinet will suit your needs. The eleven drawers give you plenty of storage for all your tools including large tools which fit in the extra deep ones. Premium skid proof drawer liners are included/keep your tools from sliding around.

EXTPWS4124RCTXBK - TEXTURED BLACKEXTPWS4124RCTXRD- TEXTURED RED

41” PORTABLE WORKSTATION, TEXTURED• 16 gauge steel construction with welded seams• Power tool rack with built-in power strip• Holds and organizes your most needed tools• Lockable lid secures tools in place when closed• Heavy duty side handles make moving easy

Dimensions: 41”W x 17-3/8”D x 21-1/2”H. Wrench rack holds 17 SAE and 22 metric combination wrenches, screwdriver/nut driver holders, (64) 1/4” deep and standard socket pegs, (66) 3/8” deep socket pegs, (28) 3/8” shallow socket pegs, (64) 1/2” deep and shallow socket pegs, (47) screwdriver/ ratchet drivers and extensions; socket tray lifts to access more tool storage underneath; gas spring raises lid when unlatched for easy access; weather stripping creates tight seal against dust and moisture; textured finish is weather-resistant.

EXTPWS4100TXBK - BLACKEXTPWS4100TXRD - RED


13

56” 11 DRAWER PROFESSIONAL ROLLER CABINET• 11 drawers with roller bearing glides• 100 lb. to 200 lb. rating per drawer• Six 5” x 2” casters (4 swivel, 2 rigid)• Handle included fits either end• Drawer lock bar assembly uses single cylinder lock design


EXTREME TOOLS 55” 12-DRAWER ROLLER CABINETS• Heavy duty 12 gauge steel frame construction• 3 extra long drawers with added support bar to fit large tools• Patented Quick Release self-latching drawer pulls keep drawers closed

even when moving• Full-extension ball bearing slides on drawers allow drawers to open and

close smoothly• Drawers load rated 100-200* lbs per drawer - *drawers with double slides

Extreme Tools® RX Series RX552512RC 55” 12-Drawer Roller Cabinet is the latest in our RX Series. This professional quality tool box features 3 extra long drawers with a support bar to provide strength and prevent warping or twisting. Patented self-latching, Quick Release drawer pulls keep draw-ers closed even when moving. Each drawer uses full-extension ball bear-ing slides that let you load 100-200* lbs per drawer (*drawers with double slides.) This huge roller cabinet gives you loads of space at an affordable price with the assurance of Extreme Tools® quality.

EXTRX552512RCBL - BLUEEXTRX552512RCBK - BLACK

14


55” 11 DRAWER PROFESSIONAL ROLLER CABINETS• 11 full-extension drawers with ball bearing glides• 300 lbs - 600* lbs/drawer *double glides• Polished aluminum full-width handle fits either side• Four 6” x 2” standard casters rated at 950 lbs. each (2 swivel, 2 rigid)• Frame is 11 gauge steel for strong chassis and supports use of heavy-duty casters

The Extreme Tools® EX Professional Tool Box Series gives you the ULTIMATE tool storage. We have taken great care in designing the features you really want. The 55” 11 Drawer Professional Roller Cabinet includes exclusively patented features which cannot be found anywhere else and give you the most for your hard-earned money. Whether you have screwdrivers and ratchets or a 48” pry bar, there is a place for every-thing. When it is time to lock up, you can leave knowing that the coded tubular lock will keep your tools safe and secure.

The 30” deep roller cabinet has a self-adjusting spring lever action that allows the latch lever to go up into the lock bar for increased security and smoother drawer action. The tool box uses single cylinder lock design for quick access. Our exclusive modular drawer design allows the drawer configuration to be rotated and arranged to suit your needs. Double-channel spot-welded support brackets on the underside of each drawer reinforce the bottom panel and prevent sagging. Top sub-weldment keeps the top of the box rigid and stable. We have included a locking safety drawer to keep your valuables safe while the rest of your tool box is unlocked. The extra deep, high gloss powder coat AKZO paint finish is scratch, chemical and stain resistant. The roller cabinets come standard with an upgraded 304 grade, 16 gauge stainless steel top work surface.



EXTREME TOOLS 55” 8-DRAWER TOP CHESTS• Self-latching, Quick Release drawer latching system• Full-width, polished solid aluminum drawer pulls• Full-extension ball bearing slides load rated 100-200* lbs• Large open till area under the lid for storing large and bulky tools• 2 deep drawers for big tools

Extreme Tools RX Series 55” 8-Drawer Top Chest features our patented Quick Release heavy duty self-latching drawer pull system. See and feel the difference when you use our drawer pull! We also designed this top chest to have a large open till area under the lid to make seeing and storing large tools easy. We also included 2 deep drawers for even more big space. The heavy duty ball bearing slides allow your drawers to hold 100-200* lbs per drawer. (*drawers with double slides.) The high gloss AkzoNobel powder coat finish will keep your tool box looking great! All that with the quality you’ve come to expect from an Extreme Tools tool box!

EXTRX552508CHBL - BLUEEXTRX552508CHBK - BLACK

16


42” 11 DRAWER TOOL CABINET WITH HEAVY DUTY BALL BEARING DRAWER SLIDES• The 45mm ball bearing drawer slides with strong detent to prevent drawers from accidentally opening• 5-Inch by 2-Inch Heavy Duty Casters secured to a reinforced undercarriage; 2 swivel, 2 fixed• All drawers come equipped with pre cut drawer liners• Full length brushed aluminum drawer trim• Aluminum corner trim provides added protection Drawers dimensions: Top Shelf: 40-1/4” W x 3-9/16” H x 17-5/8” D. Left Bank: 3 drawers 23” W x 1-7/8” H x 16-1/4” D. 2 drawers 23” W x 3” H x 16-1/4” D.Right Bank: 3 drawers 10-7/8” W x 1-7/8” H x 16-1/4” D. 2 drawers 10-7/8” W x 3” H x 16-1/4” D. Full extension 100 lb load rated ball bearing drawer slides for ease of use. 16 inch Deep drawers with a total storage capacity of 8,606 cubic inches. Keyed locking system for added security of contents. Numerous drawer sizes and configurations to accommodate all your storage needs. Protective aluminum corners on the front of the unit. Dimensions: 18-3/4”D x 42”W x 38-1/8”H. Item Weight: 171 lbs.

ITBVRB-4211RD - REDITBVRB-4211BK - BLACKITBVRB-4211BU - BLUEITBVRB-4211OR - ORANGE

42” 10 DRAWER RED TOOL CHEST WITH HEAVY DUTY BALL BEARING DRAWER SLIDES• Product Dimensions: 40-7/8” W x 17-7/8” D x 19-1/4” H• Drawers load rated at 100-Pound• All drawers come equipped with pre cut drawer liners• Full length brushed aluminum drawer trim• Aluminum corner trim provides added protection

ITBVRT-4210RD - REDITBVRT-4210BK - BLACKITBVRT-4210BU - BLUEITBVRT-4210OR - ORANGE

42” 20 DRAWER TOOL WALL TOWERS WITH CANOPY• The Wall Tower provides storage and functionality in one tool box• One piece construction provides extra storage and features a practical work

surface in the middle of the unit• Locking canopy has electrical knockouts so cordless tool chargers can be kept secure• 9 1/2” canopy in top is good for holding larger tools and materials• Pre-cut anti skid drawer liners are included• Ball bearing slides• Dimensions: 41-1/2” W x 18-3/4” D x 61-5/16” H (1054 mm x 476 mm x 1557 mm)• Ship Weight: 300 lbs. (136.4 kg)

ITBVRA-4220RD - REDITBVRA-4220BK - BLACKITBVRA-4220BU - BLUEITBVRA-4220OR - ORANGE

17


55-1/2” 6 DRAWER CHEST • 6 drawer top chest is 24” deep, 55-1/2” wide.• Gas struts in lid for easy accessibility• Roller bearing slides for ease in opening & closing drawers• Drawer liners included• High gloss powder coated paint - durable• Drop Ship Only

ITBVRT-5606RD - REDITBVRT-5606BK - BLACKITBVRT-5606BU - BLUEITBVRT-5606OR - ORANGE

56” VALUE SERIES 10 DRAWER TOOL CABINETS• 45mm ball bearing drawer slides with strong detente to prevent drawers from accidentally opening

• Six 5” by 2” casters: 4 swivel, 2 fixed• Thick rubber work surface• Pre-cut drawer liners• Aluminum corner trim provides added protection

This Canadian made 10 drawer 56” tool cabinet has become a popular item with mechanics for its rugged construction at an affordable price. Features include: Heavy duty ball bearing drawer slides with 120 lb per drawer load rating; 6 Heavy duty 5” by 2” casters, 4 swivel and 2 fixed, with toe locks; double wall construction; rubber work surface, brushed aluminum drawer trim; pre-cut drawer liners; durable and scratch resistant powder coat paint finish, and a full chrome side handle.

ITBVRB-5610RD - REDITBVRB-5610BK - BLACKITBVRB-5610BU - BLUEITBVRB-5610OR - ORANGE

18


MST5610HBK10 DRAWER ROLLER CABINET- 56”W X 24”D X 47-1/2”H• Full extension ball bearing drawer slides with load rating of 175 lbs. per set• Full length aluminum drawer pulls• 6” x 2” Spring loaded casters with 900 lb. capacity per caster• HMC high security tubular locking system• Metal thickness: 1.5mm on the frame, 1.5mm on the top of cabinet, 1.2mm on the drawers• EVA drawer liners protect your tools and drawers

This heavy duty 56” wide x 24” deep roller cabinet provides ample storage space for all your tools and diagonstic equipment. It includes 6” x 2” spring loaded casters, along with a durable side handle allowing you to easily transport the cabinet throughout your workspace.

MST5612HBK12 DRAWER TOP CHEST - 56”W X 24”D X 21”H• Full extension ball bearing drawer slides

with load rating of 175 lbs. per set• Full length aluminum drawer pulls• Full extension gas struts• HMC high security tubular locking system• Metal thickness: 1.5mm on the frame, 1.5mm

on the lid, 1.2mm on the drawers

The full extension lid allows easy access to your tools and the dual gas struts assist in opening the lid. Durable, long lasting powder coated finish with EVA drawer liners for added protection of your tools and drawers.

MST1606HBK6 DRAWER SIDE LOCKER WITH POWER DRAWER - 16”W X 24”D X 61”H• Full extension ball bearing drawer slides with load rating of 175 lbs. per set• Power drawer features power strip to keep power tools charged• Full length aluminum drawer pulls• EVA drawer liners to protect your tools and drawers• Power tool hooks included

19

SINGLE BANK TOOL BOXES

EXTPWS4111RCTXRDEXTREME 41” 11 DRAWER ROLLER CABINET - TEXTURED RED• Ball bearing glides on drawers load rated 100 lbs per set• Full width polished aluminum self-latching drawer pulls• 5” x 2” Casters (2 swivel with brakes -2 rigid) load rated 550 lbs per caster• Tubular theft-resistant lock and keys• Premium skid-proof drawer liners included

Dimensions: 41-1/2”W x 18-1/8”D x 41-1/2”H. The Extreme Tools® PWS Series 41” Standard tool boxes are a popular choice especially when a high quality, professional tool box is needed. Each standard drawer uses special self-latching pulls which keep them securely closed until you lift the handle to open the drawer. Each drawer can hold up to 100 lbs. and deep drawers with two sets of glides can hold up to 200 lbs. of your tools and equipment. The extra wide top drawer gives you room for long tools and the extra deep bottom drawers can hold your bulky tools. The handle is designed to fit on either side of the tool box making it easy to move around wherever you need it. The textured finish is weather-resistant.

KDT8315426” 4 DRAWER TOP CHEST• Innovative Trigger Lock drawer systems allows

drawers to naturally open and close• Heavy duty steel gauge for required strength

and durability• Durable powder coating with additional full

polished lacquer coating• Double Ball Bearing construction offers

exceptional load capacity and easy slide action

KDT8315526” 7 DRAWER ROLLER CABINET• Innovative Trigger Lock drawer system allows

drawers to naturally open and close• Heavy duty steel gauge for required strength

and durability• Durable powder coating with additional full

polished lacquer coating• Double Ball Bearing construction offers

exceptional load capacity and easy slide action• 5 X 2 heavy duty locking casters for easy maneuvering

20

26” BLACK TOOL CABINETS• Full-extension 25 lb. ball-bearing drawer slides• Keyed external lock bar• Full-width drawer pulls• Sturdy 4” x 2” casters offer 500 lb. load rating• Detent drawer latching systemDesigned to provide an exceptional value at an economical price. Offered in a selection of mix-and-match sizes and drawer configurations, the Wa-terloo shop series is available in black (ball-bearing) or red (friction).

WATSCA-264BK-B - 4-DRAWER WATSCA-265BK-B - 5-DRAWER

40” PRO HD SERIES ROLLER CABINET WITH 5 DRAWERS• 40” wide with 5 full width full extension steel drawers• 200 lbs. rated ball bearing slides• Patented Posi-Latch® drawer latching system prevents accidental

opening and holds drawers closed• HD 6” x 2” Casters• Overall dimensions 40” x 24” x 41.5”

• 10 year limited warranty


46” PRO HD SERIES ROLLER CABINET WITH 6 DRAWERS• 46” wide with 6 full width full extension steel drawers• 200 lbs. rated ball bearing slides• Patented Posi-Latch® drawer latching system prevents accidental opening and holds drawers closed• HD 6” x 2” Casters• Overall dimensions 46” x 24” x 40.5”• 10 year limited warranty



24” HOMEOWNERS 8 DRAWER COMBO TOOL BOX • Flat key locking system• Two front locking bars to secure top drawers• Bottom storage cabinet• 3.2 Mil Epoxy-Polyester powder coat finish• 3” x 1” casters with Zinc finish

This 24” Homeowners 8 Drawer Combo Tool Box makes cleaning up and organizing your garage or workshop tools a breeze. This economical, but sturdy steel tool chests offers a secure system to keep your tools together so that you can find what you need, when you need it. Homak Homeowners combo tool box features tubular locks, friction glides in each drawer, locking lid hinges, a bottom storage cabinet, zinc finished casters, and a powder coated finish.

HOMRD07062400 - REDHOMBK07062400 - BLACK


21

22

WATWFC-32BK32” BLACK STEEL LOCKING FLOOR CABINET• Black steel construction• 3 steel adjustable shelves• Two point locking system• Adjustable feet• Dimensions: 32” W x 18” D x 74” H

72” WORKBENCHES• Black steel construction• Two 20” locking drawers with ball bearing slides• Stainless steel top• Adjustable feet• 1500 lb. rated• Dimensions 72” W x 24” D x 41”H

WATWWB-72BKSS - STAINLESS STEEL TOPWATWWB-72BKBB - BUTCHER BLOCK TOP

WATWWC-28BK28” BLACK STEEL LOCKING WALL CABINET• Black steel construction• 1 adjustable steel shelf• 2 point locking system• Dimensions: 28” W x 12” D x 28” H

WORKSPACE ORGANIZATION

41-Inch 8-Drawer ChestWATWCH-418RD (Red) WATWCH-418BK (Black)

41-Inch 11-DrawerCabinetWATWCA-4111RD (Red)WATWCA-4111BK (Black)

52-Inch 8-Drawer ChestWATPCH-528RD (Red) WATPCH-528BK (Black)

52-Inch 11-DrawerCabinetWATPCA-5211RD (Red)WATPCA-5211BK (Black)

WATERLOOINDUSTRIES.COMWaterloo Industries, Inc., 1500 Waterloo Dr., Sedalia, MO 65301

800-833-8851 | [email protected]

PROFESSIONALS DON’T COMPROMISE.

NEITHER DOES WATERLOO.Waterloo Industries manufactures the broadest offering of tool storage products. Our solutions are:• Built to last• Intelligently designed for professional use• Tested and protected by warranties• Available with short lead times• Supported with outstanding customer service• Competitively priced

WATPCH-528RDWATPCA-5211RD

WATPCH-528BK WATPCA-5211BK

WATWCH-418RDWATWCA-4111RD

YEAR WARRANTY

YEAR LIMITED WARRANTY

24

SERVICE CARTS

4 DRAWER HEAVY DUTY SERVICE CARTS• Two gas struts in the top storage tray for easy opening and closing• Heavy-duty 5” x 2” casters for improved mobility• One-handed drawer locks that operate only when the top lid is closed• Drawers feature steel ball bearing slides for smooth, quiet operation• Plenty of storage in fully-lined drawers and storage trays, a top-locking tray,

a large bottom storage tray and 22-slot screwdriver/prybar holder

KTI’s storage cart is built for rugged, professional environments and features all-steel construction. Two gas struts in the top storage tray make it easy to open and close the lid. Cart rolls smoothly, even at maximum weight, on four heavy-duty 5” x 2” swivel casters (brakes on two wheels). Large storage drawers with all-steel ball bearing slides for smooth, quiet operation, are lined with non-toxic EVA. All drawers come equipped with one-handed drawer locks that operate only when the top lid is closed. Cart features 22 screwdriver/prybar holder holes, allowing handles to be stowed in top locking tray. Cart also features an additional side storage tray and large bottom storage area for oversized items. Unit holds up to 540 lbs. Powder coat finish. Overall dimensions: 33-1/2” W x 19-1/2” D x 35-1/2” H.

KTI75140 - REDKTI75141 - BLUE

KTI75142 - TEALKTI75143 - YELLOW

KTI75145 - BLACK

KTI75105TWO-SHELF, ONE-DRAWER SERVICE TOOL CART• Fully-lined drawer with lock to securely store tools when not in use• Large, fully-lined top and bottom storage trays to organize tools• Drawer features all steel ball bearing slides for smooth, quiet operation• Four casters allow steady, quick movement• Two casters feature easy-to-operate locking mechanism to keep cart from rolling

Durable construction for rugged shop environments. Drawer features all steel ball bearing slides for smooth, quiet operation. Sturdy, one-piece drawer handle. Cart provided ample storage. Large, fully-lined top and bottom storage trays to organize tools, shop accessories and parts for greater accessibility. Fully-lined drawer with lock to securely store tools when not in use. Four casters allow steady, quick movement. Two casters feature easy-to-operate locking mechanism to keep cart from rolling. Easy-to-assemble. Cart ships complete with all necessary hardware and instructions. Available in red only.

25

SERVICE CARTS

KTI751464 DRAWER LOCKING SERVICE CART• 500 lb. load capacity• Ball bearing drawer slides. Drawer liners for all drawers and trays• 5 “ Heavy-duty casters• Side impact bumpers• Gas shocks for lid• Cart dimensions: 148 lbs, 35.2” length, 20.6” width, 40.3” height. Top

drawer depth (2) 3”, Middle drawer depth 3”, Bottom drawer depth 6”• 1 Year Warranty on material and workmanship

OME974312 DRAWER TOOL CART WITH SLIDING TOP• 350 lbs capacity• Powder coated steel frame• 2 Drawers and a deep top storage area• Sliding top for access top storage without having to remove tools• Rubber lined drawers

The new 97431 two drawer Tool Cart with sliding top from Omega has a 350 lbs capacity with a powder coated steel frame. Sliding top gives easy access to storage without having to remove tools. Rubber lined drawers and a deep storage area makes this the perfect tool cart.

26

SERVICE CARTS

PROTECTIVE CORNER

BUMPERS

5 INCH

DEEPBOTTOM DRAWER

6 FULL DRAWER PROFESSIONAL CART• Professional grade full drawer service cart• 6 drawers and 1 lockable top bin• Full extension roller bearing drawer slides• Gas shocks raise and support the lid when unlocked• Load Capacity 500 lbs.; • Dimensions: 39.5” H x 33.75”W x 20”D

Specs:• Lockable top bin 5” deep • Top 3 drawers – 3” deep• Drawers 4 and 5 – 4” deep • Bottom drawer – 6” deep• Ergonomic push handle • Material: Heavy Gauge Steel• 5” x 2” heavy duty casters – 2 locking and 2 non-locking

• Shipping Weight 244 lbs.

SUN8057 - REDSUN8057BK - BLACK

LIMITED EDITION MONSTER CART WITH 4 DRAWERS AND BUMPERS• 500 lbs capacity• Four 5” x 2” HD swivel casters• Four protective bumpers• Lid Includes two gas struts• Cart Dimensions:

Height 39.5”; Length 33.25”; Width 20”; Weight 117 lbs.

• Drawer/Shelf Dimensions: Depth Top Bin 5”; Twin Drawer 3.25”; Middle Drawer 4.25”; Bottom Drawer 5”; Bottom Shelf 3”

MST3304G - GREENMST3304BK - BLACK

SERVICE CARTS

27

6 FULL DRAWER PROFESSIONAL CARTS• Colors and graphics are inspired by classic

American muscle cars• Comes assembled – just attach the handle• Dimensions: 39.5”H x 33.75”W x 20”D• 500 lbs. capacity• Lockable top bin - 5” deep

Drawers feature full extension roller bearing drawer slides. Top 3 drawers are 3” deep; Drawers 4 and 5 are 4” deep; Bottom drawer is 6” deep. 5” x 2” heavy duty casters – 2 locking and 2 non-locking. Gas shocks raise and support the lid when unlocked. Ergonomic push handle included.

SUN8057O - HUGGER ORANGESUN8057G - GO GREENSUN8057S - SILVERSUN8057MB - MATTE BLACK

MST3706HBK37” 6 DRAWER FLIP-TOP SERVICE CART• Full extension ball bearing drawer slides with 100 lb. load rating per set• Full-extension gas shocks for easy lid opening• HMC high security tubular locking system• Four 5” x 2” Casters: 2 swivel with brakes and 2 rigid• Metal thickness: 1.5mm on the lid, 1.2mm on frame, 1.0mm on

drawers, 2.0mm on legs

This Flip-Top 37” 6 drawer service cart has full-extension gas shocks for easy opening. The swivel casters provide for great mobility, while still allowing the cart to become stationary when the brakes are engaged. This comes equipped with full length aluminum drawer pulls and full extension drawers that include EVA liners in each drawer to protect both your tools and drawers and will store up to 100 lbs.

EXCLUSIVEINSPIRED BYAMERICANMUSCLE

MST3507G35" PRO 7 DRAWER FLIP-TOP SERVICE CART, GREEN• Full-extension gas struts support till compartment lid • HMC high security tubular locking system with keys• 3.2 mil epoxy-polyester powder coat paint finish • Four 5" x 2" swivel casters: 2 with wheel brakes• Removable 416mm ball-bearing drawer glides • Full-length, aluminum drawer pulls• Foam drawer liners included • Heavy-duty push handle• Metal Thickness: Lid - 1.5 mm; Frame - 1.2 mm; Drawers - 1.0 mm; Legs - 2.0 mm• Maximum Capacities: Casters - 330 lbs./Caster, Slide Pair - 88 lbs./Pair• Top Till Dimensions: 30" W x 19" D x 7-1/2" H• Drawer Dimensions: 2 Small - 11-5/8" W x 17-1/4" D x 2-1/4" H;

4 Medium - 25-3/8" W x 17-1/4" D x 2-1/4" H; 1 Large - 25-3/8" W x 17-1/4" D x 5-5/8" H• Total Dimensions: 31" W x 20-1/2" D x 39-1/4" H. Weight: 184 lbs.

28

SERVICE CARTS

COMPACT SLIDE TOP UTILITY CARTS• Locking slide top provides greater work surface reach• 450 lbs. rated capacity• Includes 2, 3” deep matching drawers• Heavy duty• Oversized 5” casters and wheels• Dimensions: 31.9”L x 22.4”W x 20.9”H, weight: 123.2 lbs.

In an effort to meet the growing demand among technicians for a compact utility cart able to be maneuvered in the confined spaces common in smaller garages and service bays; the new Sunex 8035 series is just the right mix of storage space and maneuverability. It’s rugged construction provides a rated capacity of 450 pounds and enough tool storage space to accommodate the tools to complete any job.

SUN8035 - BLACKSUN8035R - RED

4 DRAWER PROFESSIONAL SERVICE CARTS WITH LOCKING TOP• 5” oversized casters:

2 locking, 2 non-locking• Gas shocks to support lid with locking top• 500 lb. load capacity• Ergonomic grip handle• Bottom Large Drawer: 5” • Bottom Shelf: 3”• Depth: 20” • Height: 39.5”• Length: 33.25”• Top Bin: 5” • Middle Large Drawer: 4.25” • Twin Small Drawers: 3.25”


SUN8005SC30” SERVICE CART• 3” deep shelves• Large, easy to maneuver 4” wheels: 2 locking and 2 standard

• Load capacity: 350 lbs.• Height: 35.3”• Length: 30”

SERVICE CARTS WITH LOCKING TOP AND DRAWER• Clip-on roller-bearing slides on drawer• Large, easy to maneuver 4” wheels:

2 locking and 2 standard• 3” deep shelves• Locking top are keyed the same,

so the user only has one set of keys

Efficiency saves you valuable time and money. This service cart brings you and your tools the mobility you crave and flexibility you need. The service cart comes with a locking top and drawer, It’s made with chrome 16 gauge steel frame, with a durable powder coated finish.

SUN8013ABL - BLUESUN8013ABK - BLACKSUN8013A - RED

29

SERVICE CARTS

SUN8019HEAVY DUTY ADJUSTABLE WORK TABLE WITH DRAWER• Top tray dimensions are 29” x 20” x 1” with a new

feature designed to house air tools, also with a standard screwdriver and pry bar holder

• New drawer 1” in depth• Capacity: 220 lbs.• Adjustable from 34” to 47.75”• Large swivel casters and a wide stable base

Efficiency saves you valuable time and money. Bring your tools closer to you and keep them there! With this heavy-duty adjustable work table with drawer. Also includes rubber bumpers on all four corners to protect car finishes and other surfaces from being damaged. Table liner is included.

SIDE WORK BENCH FOR SUN8013A• Durable powder coated red finish• Folds down when not in use• The new 8004 mounting design

is “L” shaped and easily mounted to the side of 8013A and uses the same two bolts attaching the leg supports to the cart.

• 30 lb. capacity

This is a side work bench for the 8013A. It’s easy to install and makes a work area of 14” X 16”. Made with quality and the durability to last!


EXTRA LARGE LOCKING SCREWDRIVER/PRY BAR HOLDER FOR SERVICE CART • Attaches to SUN8003SC, SUN8005SC and SUN8013A and most other carts• Holds up to 26 items• 3 different hole sizes• Locking lid for security• Durable powder coat finish•Dimensions: 16” x 11” x 3.75”; weight: 8.5 lbs.

SUN8011 - REDSUN8011BL - BLUESUN8011BK - BLACK

OPTIONAL STORAGE DRAWER FOR SERVICE CART • Clip-on roller-bearing slides• Durable powder coated finish• Attaches to 8003SC, 85SC & 813A

and most other carts with an inner leg length of at least 26”

SUN8006CRBL - BLUESUN8006CRBBK - BLACK

KDT83153GEARWRENCH® XL 4 DRAWER TOOL CART• Innovative Trigger Lock drawer

system allows drawers to naturally open and close

• Heavy duty steel gauge for required strength and durability

• Durable powder coating with additional full polished lacquer coating

• Double Ball Bearing construction offers exceptional load capacity and easy slide action

• 5” X 2” heavy duty locking casters for easy maneuvering

KDT83152GEARWRENCH® XL 2 DRAWER TOOL CART• Innovative Trigger Lock drawer system

allows drawers to naturally open and close• Heavy gauge steel provides strength and durability• Durable powder coating with additional full polished

lacquer coating• Double Ball Bearing construction offers exceptional

load capacity and easy slide action• 5” X 2” heavy duty locking casters for easy maneuvering

30

SERVICE CARTS

LUXTC1113 SHELF PLASTIC SERVICE CART• Retaining lip around the back and sides of flat shelves• Includes four heavy duty 4” casters, two with brake• Has a push handle molded into the top shelf• All shelves are reinforced with two aluminum bars• 32”W x 24”D shelvesThis TC111 cart is three tub shelves 24”D x 32”W x 37-1/4”H. Clearance between shelves is 10-3/4”. Easy assembly. Made in USA.

LUXEC111LUXOR E SERIES THREE SHELF UTILITY CART• 4” Full swivel casters, two with locking brake• 400 lb. weight capacity (evenly distributed)• Lifetime warranty• Three tub shelves (18” D x 32” W per shelf)• Ergonomic push handle molded into top shelf• 33% more capacity than our 18 x 24 tub cart• Dimensions: 18” D x 35-1/4” W x 36-1/4” H (width includes handle); 2-1/2” deep tub shelves are 10-1/2” apart

The Luxor E Series utility carts are made of high density polyethylene structural foam molded plastic shelves and legs that won’t stain, scratch, dent, or rust. Easy assembly. Made in USA.

LUXTC112-SHELF PLASTIC UTILITY CART• Retaining lip around the back and sides of flat shelves• Includes four heavy duty 4” casters, two with brake• Has a push handle molded into the top shelf• All shelves are reinforced with two aluminum bars• 24”D x 32”W x 37-1/4”H.Clearance between shelves is 24-3/4”. Easy assembly. Made in USA.

LUXEC11LUXOR E SERIES TWO SHELF UTILITY CART• 400 lb. weight capacity (evenly distributed)• 4” full swivel casters, two with locking brake• Ergonomic push handle molded into top shelf• Two Shelves; 2-1/2” deep tub shelves are 22-1/2” apart 33% more

capacity than our 18 x 24 tub cart• Dimensions: 18”D x 35-1/4”W x 34-1/4”H (width includes handle)• Lifetime WarrantyThe Luxor E Series utility carts are made of high density polyethylene structural foam molded plastic shelves and legs that won’t stain, scratch, dent, or rust.

PLASTIC UTILITY CARTS• Retaining lip around the back and sides of flat shelves

• Includes four heavy duty 4” casters, two with brake

• Has a push handle molded into the top shelf

• Easy assembly• 24” x 32”

LUXTC11 - 2 Shelf Utility Cart

LUXTC111 - 3 Shelf Utility Cart

LUXOR E SERIES UTILITY CARTS• 400 lb. weight capacity (evenly distributed)• 4” full swivel casters, two with locking brake• Ergonomic push handle molded into top shelf• 33% more capacity than our 18 x 24 tub cart• Lifetime Warranty

The Luxor E Series utility carts are made of high density poly-ethylene structural foam molded plastic shelves and legs that won’t stain, scratch, dent, or rust.

LUXEC11 - 2 Shelf Utility Cart

LUXEC111 - 3 Shelf Utility Cart

Luxor | H. Wilson has been a leader in designing and manufacturing top of the line specialty carts since the 1950’s.

Today, we bring our USA made standard to the automotive market with quality plastic utility carts available in many sizes and configurations. Whether you are stocking parts, storing tools, cleaning up the shop, or transporting materials; our carts have been made to withstand it all.

www.luxorfurn.com

31

FLM6520ZR20" ZERUST® TOOL BRUTE™ TOOL BOX• Blue with Zerust® corrosion inhibitor; rugged and durable tongue

and groove construction adds strength and keeps water out• Quick access lids enhance appearance while providing

additional storage space• Built-in top lid tray provides a place for small parts

while working on projects• Over molded handle provides a comfortable non-slip grip

FLM6518ZR17" ZERUST® TOOL BRUTE™ TOOL BOX

FLM6520TH20" TOOL BRUTE WITH LIFT-OUT TRAY• The utility box offers a spacious, open interior and is manufactured

from lightweight copolymer resins that are non-conductive, dent-proof, rustproof and scratch resistant. It features a textured finish, tongue-and-groove construction, brass hinge and latch pins and durable, recessed handles.

• Outside Dimensions: 20" x 9-3/4" x 9-3/4"• Inside Dimensions: 17-1/4" x 9" x 9"

ITBB52819" METAL HAND TOOL BOX W/TRAY• 24 and 26 gauge all durable steel construction • 741 cubic in (12,138 cm) storage capacity • Powder coat paint and a full width piano hinge on lid • Hasp for locking and two latches• Heavy plated latches and durable plastic top handle • 50 lbs. (22,7 kg) load rating for easy transportation

32

ACCESSORIES

LOCK-A-SOCKET • Will accommodate all types of sockets, swivels, impacts, shallows, deeps• Locks sockets in place by a simple twist to the right• Has a high energy magnetic strip on the back so it can be mounted to metal surfaces

MTSLAS251/4” LOCK-A-SOCKET 13 PIECE / 14” LONGMTSLAS383/8” LOCK-A-SOCKET 14 PIECE / 18” LONGMTSLAS501/2” LOCK-A-SOCKET 16 PIECE / 22” LONG

3 ROW LOCK-A-SOCKET TRAYS• Features the famous Lock-A-Socket technology• Made of 16 gauge powder coated steel • Accommodates 51, 1/4” drive sockets• Overall size is 17-1/2” long x 5-1/4” wide• Rubber pegs located underneath for surface protection

The 1/4” drive Lock-A-Socket Tray allows you to securely organize all of your 1/4” drive sockets on one heavy duty tray. This allows you to take your sockets with you to the work area.

MTSLASTRAY25 - 1/4” DRIVE • Accommodates 51



HNE9302 - METRIC • 1/4” Tray holds 28 Sockets - Sizes 4mm to 15mm• 3/8” Tray holds 30 Sockets - Sizes 6mm to 20mm• 1/2” Tray holds 34 Sockets - Sizes 10mm to 25mm and 27mm

3 PIECE SOCKET TRAY SETS• Hansen socket trays straighten out toolbox clutter and chaos• Patented socket trays are made of tough ABS Plastic that resists gas,

oil and abuse• Provides easy access and organization for individual sockets• Post bases are beefed up and designed to hold sockets more securely• Lifetime warranty and made in the U.S.A.

HNE9301 - SAE• 1/4” Tray holds 26 Sockets - Sizes 1/8” to 5/8”• 3/8” Tray holds 26 Sockets - Sizes 1/4” to 1”• 1/2” Tray holds 28 Sockets - Sizes 3/8” to 1 1/4”

MTSLASTRAY 5 ROW LOCK-A-SOCKET TRAY• 76 Lock-A-Socket posts allow you to have 1/4, 3/8, and 1/2” Dr. Lock-A-Sockets• Heavy duty powder coated steel• Swiveling handles for easy transporting• Carry 5 sets of sockets at one time• Rubber feet for a non-skid grip

This new design uses the same concept as the popular Lock-A-Socket. To lock the socket, just turn the socket to the right 90 degrees. To unlock it, simply turn the socket back to the left 90 degrees. The LAS TRAY is made form 16 gauge powder coated steel, for long-lasting durability. The LAS TRAY comes equipped with two swivel handles for easy carrying, and also rubber pegs on the bottom, to keep the tray from sliding and scratching painted surfaces. The LAS TRAY has two rows of 1/2” drive locking posts. Each row consisting of 14 posts. Two rows of 3/8” drive Locking posts, each row consisting 14 posts. One row of 1/4” drive Locking posts consisting of 20 posts.

HANSEN® SOCKET TRAYS• Organize your sockets for quick, easy identification by size and style• See which socket is missing at a glance• Each post is marked for socket size• Each tray holds from 26 to 34 Standard and deep sockets• Made of tough ABS plastic that resists oil & grease• Fit most U.S. and foreign made sockets• Fit most standard tool boxes• Holds standard & deep sockets• High impact plastic• Resists oil and grease • Made in the U.S.A.• Sockets and ratchets NOT included

HNE14011/4” DRIVE FRACTIONAL TRAY 1/8” TO 9/16”HNE14021/4” DRIVE METRIC TRAY 4MM-14MMHNE38013/8” DRIVE FRACTIONAL TRAY 1/4” TO 1”HNE38023/8” DRIVE METRIC TRAY 6MM-20MMHNE12011/2” DRIVE FRACTIONAL TRAY 3/8” TO 1-1/4”HNE1202

1/2” DRIVE METRIC TRAY 10MM-27MM

ACCESSORIES

SOCKET CADDYThis organizer allows users to customize the storage and organization of some of the messiest areas of the average tool box, such as the socket drawer. The base of this product is made out of a high impact plastic magnetic grid. Use with additional Power Pegs (sold separately) in any combination of 3 drive sizes to customize your workspace.

Other Features:• Shallow or deep sockets• Standard or metric sockets• Will not magnetize sockets• Magnets retain strength permanently• Grease, oil and chemical resistant• Tough polymer base• Rust resistant

Includes 28 interchangeable Power Pegs.

MCP72421- 1/4” drive

MCP72422 - 3/8” drive

MCP72423 - 1/2” drive

33

MAGNETIC MATThe mat is a magnetic, convertible and interchangeable means for storing and organizing sockets. Customize any tool box and utilize storage space in the most unlikely areas.. Versatile enough to be used in drawers to organize sockets or simply flip the mat over to the rubber side and store a variety of other tools in a vertical position. The flexible design makes the magnetic mats your most versatile tool...use it almost anywhere you can imagine. High powered magnets are imbedded in a flexible, high impact poly-pro body. May be used with Power Pegs (sold separately) in any combination of 3 drive sizes (1/4”, 3/8” or 1/2”) to customize your workspace.

MCP72424 - 2-panel MagKanic Mat MCP72425 - 3-panel Power Mat MCP72426 - 3-panel Power Mat with 84 assorted power pegs

MSTLAS25RH (1/4” DRIVE)• 14” long with 13 posts



LOCK-A-SOCKET WITH RATCHET HOLDER• Will accommodate all types of sockets, swivels, impacts, shallows, deeps• Locks sockets in place by a simple twist to the right• Locking Posts are interchangeable for customizing• Aluminum frame with magnetic backing so it can be mounted to metal surfaces• New Ratchet Holder included• 1 year warranty on material and workmanship

MSTLASTRAY5 ROW LOCK-A-SOCKET TRAY• Holds 3 socket sizes - 1/4”, 3/8”, and 1/2”• Holds a total of 76 sockets• Locks sockets in place• Locking posts are interchangeable• Swivel handles included for easy carrying

5 Row Lock-a-Socket Tray. 1 row of 1/4” posts (20 total), 2 rows of 3/8” posts (28 total), and 2 rows of 1/2” posts (28 total). Tray uses the same concept as the Lock-a-Socket. It allows you to have a variety of drive sizes on one tray. Locking posts are interchangeable for customization and are available separately. Rubber pegs underneath for surface grip and protection. Swivel handles included for easy carrying. Tray is made from 16 gauge powder coated steel for extra strength.

1/4” DRIVE

3/8” DRIVE

1/2” DRIVE

LIFETIMEWARRANTY*

34

ACCESSORIES

QUIK-PIK WRENCH RACKS• Sizes marked on tabs for instant identification• Patented spring tabs keep wrenches in place• Made of tough Polypropylene plastic• Low profile fits in 2 inch deep toolbox drawer• Lifetime Warranty - Made in the U.S.A.

Hansen Global’s Quik-Pik wrench racks organize wrenches while the clear labeling makes sizes easy to grab and go.

HNE5301 - SAE - REDEach tray pad printed with the following wrench sizes: 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” and 15/16”.

HNE5302 - METRIC - GREYEach tray pad printed with the following wrench sizes: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm and 18mm.

HNE5300HANSEN® WRENCH RACK (BLUE)• Organizes wrenches by size, fractional and metric• Angled wrench slots assure clearance in 2” deep toolbox drawers• Molded of ABS plastic• Rack has a molded-in carry handle and pegboard slots• Oil, grease and solvent resistant• Spring tabs hold wrenches in place• Angled slots allows clearance in 2 inch deep drawers• Each slot clearly marked with wrench size • Three styles available: fractional, metric & universal

MCP72460UNIVERSAL MAG-CLIPUse the Universal Mag-Clip Strip to hold wrenches, screwdrivers, pliers and other hand tools to keep them at your fingertips.

Other Features:• Mounts on any smooth metal surface• Holds tools tight and secure• Reverse polarity magnetic power• Magnets retain strength permanently• Grease, oil and chemical resistant• Tough polymer base• Rust resistant

POWER PEGSInterchangeable steel posts available in 1/4”, 3/8” and 1/2” drive sizes. Use Power Pegs with MagKanic Mat, Power Mat, Socket Caddy or Interchangeable Mag-Clip Strip for the ultimate storage system. 10 pack.

MCP72441- 1/4” driveMCP72442 - 3/8” driveMCP72443 - 1/2” drive

LIFETIMEWARRANTY*

MAG MOUNTThe Mag Mount is a magnetic tool storage and/or mounting system for use with pegboard. The Mag Mount will hold tools securely without the use of hooks or bars. This design will work with 1/8” and 1/4” pegboard and features “super duty” magnetic power. Includes screws for 1/8” and 1/4” pegboard.

MCP72453 - 3 pack MCP72455 - 5 pack

INTERCHANGEABLE MAG-CLIP STRIPMagnetic so cket holders hold sockets tight without magnetizing them. Use with additional Power Pegs (sold separately) in any combination of 3 drive sizes to customize your workspace.

Other Features:• Shallow or deep socket • Standard or metric sockets• Secures on any smooth metal surface• Magnets retain strength permanently• Grease, oil and chemical resistant• Tough polymer base• Rust resistant Includes 10 interchangeable Power Pegs.

MCP72400- 1/4” driveMCP72404 - 3/8” driveMCP72405 - 1/2” drive

ORIGINAL MAG-CLIP STRIPMagnetic socket holders hold sockets tight without magnetizing them. Hangs or mounts on any smooth metal surface.

Other Features:• Shallow or deep socket • Standard or metric sockets• Magnets retain strength permanently• Grease, oil and chemical resistant• Tough polymer base• Rust resistant

MCP72401 - 1/4” driveMCP72402 - 3/8” driveMCP72403 - 1/2” drive

1/4” DRIVE

3/8” DRIVE

1/2” DRIVE

LIFETIMEWARRANTY*

1/4” DRIVE

3/8” DRIVE

1/2” DRIVE

LIFETIMEWARRANTY* 1/4”

DRIVE3/8”

DRIVE1/2”

DRIVE

35

HEADER GOES HERE

MTSMPH10R MAGNETIC PLIERS HOLDER• Magnetically holds tools• Magnetically attaches to most metal surfaces• Holds up to 10 tools• Also good for ratchets and extensions• Perfect for service carts and tools boxes• The Magnetic Pliers organizer holds up to 10 pliers, ratchets,

extensions, and etc. with the full force of high powered magnets in a compact, efficient design. The magnetic backing secures the Magnetic Pliers Organizer onto most any metal surface making it easily accessible whether at the toolbox or under the hood.

PLIERS AND WRENCH RACKS• Keeps toolboxes neat and organized - by holding pliers and wrenches

vertically, tools take up less space in the toolbox while keeping them easy to identify, locate and grab

• Thirteen slots hold various shapes and sizes of wrenches and pliers• Only 1-5/8” tall - specially designed slot allows thinner pliers and wrenches to remain vertical• Also organizes open-end, box and ratcheting wrenches• Affix double-sided foam tape to hold rack in place in toolbox• Ten 5/8” wide slots for narrow tools and three 7/8” wide slots for

larger tools. Made of durable molded plastic.

LIS40460 - BLACKLIS40490 - RED

12 PIECE WRENCH HOLDERS• Holds 12 wrenches• Can be mounted on a wall or used in a drawer• Has a handle for carrying your wrenches• Durable, high impact plastic• Fuel and solvent resistant

MTSWH12B - BLUEMTSWH12BK - BLACKMTSWH12R - RED

LOCK-A-WRENCHES• Holds up to 12 wrenches• Holds up to a 1” or 24mm wrench• Twist one wrench to lock or unlock the entire set• Magnetic backing will

attach to most metal surfaces• Great for roll carts

This blue 12 piece wrench holder requires a simple twist of one wrench to lock or unlock the entire set. Magnetic backing allows this vertical organizer to conveniently attach to most metal surfaces. Designed to securely hold a variety of wrenches, SAE or Metric.

MTSLAW12B - BLUE MTSLAW12R - RED

MAGNETIC WRENCH HOLDERS • Holds 14 wrenches• Great for service carts • 2” x 12” x 2-1/8”• Powerful magnets pull the wrenches into the slot This magnetic wrench holder with 14 graduated slots was engineered to pull and align wrenches into place horizontally using magnets. Magnetic backing attaches this device inside a toolbox drawer and most metal surfaces.

MTSMWH14MBFOR METRIC SIZES 8MM - 21MMMTSMWH14SRFOR SAE SIZES 1/4” - 1”

ACCESSORIES

36

ACCESSORIES

HNE1001TOOLHANGER BOARD• Made of High-Grade polypropylene

plastic for interior and exterior use• Interlocking boards can be hung vertically or horizontally• Customizable with the six unique twist and lock hangers• Lifetime Warranty• Made in the USA

The ToolHANGER is a plastic organization board with twist and lock tool hangers to organize, display and hang your tools. Made in the USA this interlocking board is molded from a durable polypropylene for interior or exterior use. It has six unique twist and lock hangers designed not to break and to keep tools secure and right where you need them. The ToolHANGER can be hung horizontally or vertically to maximize your workspace and storage needs. Organize your garage, basement, shop or anywhere tools are needed. The organization possibilities are endless with The ToolHANGER.

MSTLAAT4MAGNETIC LOCKING AIR TOOL HOLDER• 4 Locking Air Tool Holders on 12” aluminum rail with magnet• Easily operated with one hand• Rail is designed to securely fit over most tool box and service carts• Easily add or remove individual holders as needed• Each Locking Air Tool Holder can be moved on the rail for

spacing needs

Magnetic Locking Air Tool Holder. 4 locking air tool holders on 12” aluminum rail with magnetic backing. Locks air tools in the holder. Reduces dirt, grime, and other contaminates while being stored. The rail is designed to securely fit over most tool boxes and service carts. The also has a magnetic backing to help hold the Locking Air Tool Holder in place. Made of durable, impact, and chemical resistant materials. Easily operated with one hand. Each Locking Air Tool Holder can be moved on the rail for spacing needs. Easily add or remove individual holders for your needs.

HNE8209TOOLHANGER 11 PC KIT• Made of High-Grade polypropylene

plastic for interior and exterior use• Interlocking boards can be hung vertically or horizontally• Comes with a variety of unique twist and lock hangers• Lifetime Warranty• Made in the USA

The ToolHANGER is a plastic organization board with twist and lock tool hangers to organize, display and hang your tools. Made in the USA this interlocking board is molded from a durable polypropylene for interior or exterior use. It has six unique twist and lock hangers designed not to break and to keep tools secure and right where you need them. The ToolHANGER can be hung horizontally or vertically to maximize your workspace and storage needs. Organize your garage, basement, shop or anywhere tools are needed. The organization possibilities are endless with The ToolHANGER.

*TOOLS NOT INCLUDED

*TOOLS NOT INCLUDED

www.HansenGlobalinc.com

With millions of trays sold, Hansenstands behind the quality of the

USA MADE PRODUCT with a Limited Lifetime Warranty.

The ToolHANGER is a plastic organization board with twist and lock tool hangers to organize, display and hang your tools. It has six unique twist and lock hangers designed not to break and to keep tools secure and right where you need them.

HNE8209TOOLHANGER 11 PIECE KIT• Made of High-Grade polypropylene plastic

for interior and exterior use• Interlocking boards can be hung vertically or horizontally • Comes with a variety of unique twist and lock hangers• Lifetime Warranty

Maximize your workspace and storage needs. Organize your garage, basement, shop or anywhere tools are needed.

HNE2007 HNE1001TOOLHANGER BOARD• Made of High-Grade polypropylene plastic for interior and exterior use• Interlocking boards can be hung

vertically or horizontally• Customizable with the six unique

twist and lock hangers• Lifetime Warranty

HNE6005HNE5003HNE3007 HNE7004HNE4006

2” HANGERS OVALHANGERS

HOOK HANGERS

3" HANGERS RECTANGLEHANGERS

4" HANGERS

Also sold separately

38

ACCESSORIES

STAINLESS STEEL MAGNETIC PARTS TRAYS• Stainless steel• Can be used horizontally, vertically, or upside down•Permanent magnet with rubber scratch guardThis stainless steel parts tray allows you to store nuts, bolts, tools, and etc magnetically.

MTS3510 - 6” DIAMETERMTS3520 - 9.5” X 5.5” MTS3540 - 11” X 11”

KTI72450MAGNETIC TOOL HANGER 11 LB. CAPACITY• Holds heavy and irregularly shaped

tools, such as hammers, mallets and wrenches.

• Ideal for storing cords, shovels, and more.

• Screw-hole design allow for easy mounting to nonferrous surfaces.

• Magnetic mount supports up to 11 lbs.

LIFETIMEWARRANTY*

KTI72460MAGNETIC TOOL BOX 33 LB. CAPACITY• Powder-coating finish protects holder

even in rugged, professional environments. • Chamfer design holds various tools, such as

cans, brushes and tape. • Organize workshops, garages and manufacturing sites. • Screw-hole design allows for easy mounting to

nonferrous surfaces. • Portable holder goes from job to job. • Holds up to 33 lbs.

LIFETIMEWARRANTY*

KTI72451MAGNETIC TOOL HANGER FOR AIR IMPACT 20 LB. CAPACITY• Effortlessly holds most pistol-type

impact wrenches. • Screw-hole design allow for easy

mounting to nonferrous surface. • Magnetic mount supports up to 20 lbs.

LIFETIMEWARRANTY*

KTI72465MAGNETIC TOOL HOLDER MULTIPURPOSE 15 LB. CAPACITY• Holds a variety of screwdrivers, pliers, sockets,

wrenches, hammers and more. • Firmly attaches to metal surface. • Extends up to 20” wide. • Each socket seat encases a powerful magnet. • Special hooks hold wrenches, keys and other hard

to store items. • Permanently mount using screw holes or built-in

magnets support up to 15 lbs.• Stores up to 71 tools.

LIFETIMEWARRANTY*

This Advertisement was Prepared in Advance, Therefore Merchandise Availability is Subject to Delivery by Manufacturers as Scheduled. All Advertised Items Are Not Stocked By All Stores. Not Responsible for Typographical or Pictorial Errors.

Always wear appropriate safety equipment and observe safety advice and proper use of equipment as instructed in warning and caution labels and operational instructions.

FREIGHT TERMS: • FedEx will be used for cartons/items weighing 70 lbs. or less.

• Items weighing over 70 lbs will be shipped via Freight Truck

• Freight delivery shipments must be inspected for damage and loss.

• Inspect for obvious damage and concealed damage.• Confirm carton/pallet count.• Refuse shipment or notate damage/loss on delivery document.

• Accepting and signing for a damaged or a short shipment releases the carrier and distributor from any claim responsibility.

• Additional services provided by the carrier such as, lift-gate, residential delivery or special handling will incur additional freight charges.

FACTORY DIRECT ITEMS: • Not all items are stocked by Tech’s Edge Distributors. Some items in this publication may be shipped directly from the manufactuer/factory.

TECHNICIAN LEASING:• Ask your Tool Dealer about attractive Lease Options.

P.O

Box

9000

9La

kela

nd, F

l 338

04

THE JOB’S NOT FINISHED UNTIL YOU PUT YOUR TOOLS AWAY!

Documents

Tool Storage Solutions - Fall 2015 / Spring 2016