Tooling Product Guide - XYZ Machine Tools Ltdspares.xyzmachinetools.com/pdfs/XYZ Tooling Guide - Web Edition - Oct19.pdf17 bison tool post spares & adjustable spindle back stop 18

Tooling

Product Guide

October 2019

Tel: 01823 674200 Fax: 01823 674201 Email: [email protected]

2

INDEX

Page No.

3 FAST TAP MACHINES

4 FAST TAP TOOLING ACCESSORIES

5 MANUAL HORIZONTAL BANDSAW

WORK HOLDING

6 HYDRAULIC MACHINE VICE

7 A-TYPE MACHINE VICE & KURT MACHINE VICE

8 K-TYPE MACHINE VICE & 52 PIECE MILL CLAMPING KIT

9 SEMI-UNIVERSAL DIVIDING HEAD

10 HORIZONTAL / VERTICAL ROTARY TABLE

11 ROCKSTEADY

MACHINE ACCESSORIES

12 RENISHAW PRIMO KIT & ACCESSORIES

13 HEIDENHAIN PROBE & ACCESSORIES

14 WORKLIGHTS, AIR POWERED DRAWBAR & POWERFEED’S

15 DRILLING ATTACHMENTS & GRIPPEX BAR PULLERS

LATHE TOOL HOLDING

16 BISON TOOL POST & HOLDERS

17 BISON TOOL POST SPARES & ADJUSTABLE SPINDLE BACK STOP

18 LATHE CENTRES

19 BISON LATHE CHUCKS

20 CHUCK SOFT JAWS

SPINDLE ACCESSORIES & TOOLING

21 MILLSTAR DIGITAL READOUT, RIGHT ANGLE & HORIZONTAL MILLING ATTACHMENTS

22 ER COLLETS

23 SPARES FOR COLLET CHUCKS & VERTEX ORTLIEB STYLE COLLETS (OZ25)

24 PRECISION COLLETS - R8

25 PRECISION COLLETS - 5C

26 CENTRELINE SPEED INCREASER

27 ER COLLET CHUCK SET, ER COLLET CHUCKS, FACE MILL ARBORS, & MORSE TAPER ARBORS & SLEEVES

28 BORING HEAD & FACING HEAD - BOXED SETS

29 TAPMATIC TAPPING ATTACHMENTS & ACCESSORIES, KEYLESS DRILL CHUCKS, & DRILL CHUCK ARBORS

30 TAPMATIC TAPPING ATTACHMENTS & ACCESSORIES, KEYLESS DRILL CHUCKS, & DRILL CHUCK ARBORS

31 TIGHTENING FIXTURE, PULL STUDS, JOB CONTACT PROBE, QUICK RELEASE QUILL NUT & HEIGHT PRE-SETTER

32 & 33 EASY CHANGE TOOLING SYSTEM

34 CTL ROTARY COOLANT ADAPTORS

35 CTL ANGLE HEAD

36 & 37 CHUCK & TAPPING SIZE CHARTS

Please Note: For same day dispatch, orders must be placed before the following times:

MONDAY—THURSDAY 15.00

FRIDAY 12.00

We have a 25% re-stocking fee for parts returned unused BUT we do not accept parts back that are to special order or for non-standard stock.

You must ensure the person fitting them is competent for the task and will leave the machine in a safe state. If you have any doubts we have fully trained service engineers to assist you in maintaining your machines ultimate performance.

Spares For Competitors Machines

XYZ Machine Tools understand the importance of having a large stock of spare parts to ensure the continued support for over 20,000 machines we have sold

in the UK. That is why we hold over £1,000,000 of stock here at our headquarters in the UK ready for despatch the same day.

However, we cannot guarantee our spares will suit machines not supplied by XYZ Machine Tools. Sometimes spares may appear similar to those from other

3

FAST TAP 1000, 800, 400 200 & 90

◼ Produces high quality threads

◼ Ideal for blind and through holes

◼ Can be used by unskilled labour

◼ Tap breakage drastically reduced

◼ Conventional taps or roll taps

◼ Free up your CNC machines

◼ Taps any material

◼ No indexing or moving workpieces

Each machine comes complete and ready for operation with:

◼ Parallel arm for vertical tapping with 48” (1200mm) reach

◼ Air preparation unit with mist lubricator, Water trap, pressure gauge and regulator

◼ Air driven reversible tapping motor

◼ Quick change tapholder (Bilz style)

◼ Exhaust noise muffler

A range of five Fast Tap machines taps threads up to M24 in steel and aluminium. Fast Tap consists of a similar pantographic arm carrying an air motor which will tap blind holes as well as through holes, both vertically and horizontally. The standard 48” (1200mm) reach of the arm can easily be extended by up to 20” (500mm) if required, ensuring fast positioning of the tap relative to the hole. This means that larger fabrications or plates can remain stationary whilst the tap can be positioned within an 11 ft (3400mm) circle. Taps are held in the widely available Bilz style quick change tap drivers but the machine is capable of other common operations such as reaming, chamfering, countersinking, spot facing, helicoil insertion and stud making as well as assembly work like screw and nut driving. Fast Tap realistically removes tapping from expensive CNC machines and is significally quicker than hand tapping without needing skilled labour.

XYZ Part No.

Max. Capacity Speed: RPM Air pressure flow

Max.

noise Price

Steel Aluminium No load PSI (CFM) (dBA)

2052 Fast Tap 1000 M6 M8 1200 90 (20) 85.0 £1940.00

2055 Fast Tap 800 M10 M12 700 90 (26) 85.1 £1940.00

2054 Fast Tap 400 M12 M14 300 90 (26) 84.2 £1940.00

2053 Fast Tap 200 M16 M24 250/800 90 (30) 84.1 £4210.00

2056 Fast Tap 90 M24 M24 90/250 90 (30) 84.1 £4210.00

Warranty: 12 months parts (and labour at our works)

FAST TAP MACHINES

4

FAST TAP ACCESSORIES

Torque limiting tap chucks for Fast Tap

XYZ Part No.

Size For Tap Size Price

2008 0 M1-M2 £88.20

2027 0 M2.2-M2.5 £88.20

2031 0 M3 £88.20

2011 1 M3 £88.20

2032 1 M3.5 £88.20

2013 1 M4 £88.20

2033 1 M4.5 £88.20

3065 1 M5 £88.20

2017 1 M6 £88.20

2019 1 M8 £88.20

2022 1 M10 £88.20

2023 1 M12 £88.20

2024 1 M14 £88.20

2025 2 M16 £88.20

2029 2 M20 £88.20

2030 2 M24 £88.20

Part numbers refer to ISO shanks (DIN shank chucks on request) For ISO & DIN Chuck and Tap Size Chart refer to page 40

FAST TAP CHUCKS

◼ Fast Tap uses the widely available Bilz style clutch driven tap chucks

Size 0 (FAST TAP 1000 ONLY)

M1-M8 (ISO Taps) and M1-M10 (DIN Taps)

Size 1 (FAST TAP 1000, 800, & 400)


Size 2 (FAST TAP 200 & 90 ONLY)


Reducer allows smaller taps to be used on Fast Tap 200 and Fast Tap 90

Optional Accessories

XYZ Part No.

Description Price

1978 Horizontal motor bracket for 1000, 800 & 400 £179.00

1979 Horizontal motor bracket for 200 & 90 £462.00

1971 20” (500mm) Extension arm £347.00

1977 9” (225mm) Extension arm £200.00

Reducers for Fast Tap

XYZ Part No.

For Chuck Size

Price

1995 1 to 0 £99.80

1994 2 to 1 £99.80

Pin wrenches for torque adjustment

XYZ Part No.

For Chuck Size

Price

2045 0 £17.85

2046 1 £17.85

2047 2 £18.90

Stub arbors for mounting drill chucks on Fast Tap

XYZ Part No.

Size Stub Taper Price

2000 1 (Jacobs) J6 £88.20

5

MANUAL HORIZONTAL BANDSAW

◼ One bimetal blade fitted to machine

◼ Rugged vertical blade guide arms carrying tungsten carbide faced blade guides and roller bearings for optimum squareness of cut

◼ Quick acting vice, with 90° to 45° mitreing

◼ Low voltage control with overload protection for motor

◼ Hydraulic control of downfeed rate

◼ Control panel conveniently placed on top of bow

◼ Moveable material length stop

◼ Fast and accurate ‘pointer to mark’ blade tensioning by large hand wheel

◼ Heavy duty cast iron construction

◼ Swarf brush

◼ Removable swarf tray for easy cleaning

◼ Automatic blade stop at end of cut

◼ Efficient coolant system with built-in tank and pump, supplies coolant directly onto blade, to each guide arm

◼ CE equipped with positive mode Interlocks on drum covers

XYZ Part No.

4632 £3200.00

XYZ 260 ● round ◼ rectangle

Cutting capacities at 90° ● 260mm

Cutting capacities at 90° ◼ 486 wide x 254 high mm

Cutting capacities at 45° ● 230mm

Cutting capacities at 45° ◼ 230 wide x 260 high mm

Blade size 3300 x 25 x 0.9mm

Blade speeds (50Hz) 21, 34, 43, 60m/min

Motor 1430rpm, 2hp, 4 pole

Floor space 1730 x 760 x 1130mm

Weight 390kg net

Spare Blades: 3300 x 25 x 0.9mm, M42 Bimetal

XYZ Part No. Description Price

8880 3-4 vari-pitch £52.50

3949 4-6 vari-pitch £52.50

6144 6 TPI £52.50

4778 6-10 vari-pitch £52.50

2973 10 TPI £52.50

Warranty: 12 months parts & labour

A guide to the selection of the correct blade pitch for metal

Tooth Pitch TPI - Bars Tubes Profiles

Cross Section

Regular Hook Variable Wall

Thickness Tooth Pitch

TPI Cross

Section Tooth Pitch

TPI

15mm 10 6/10 10mm 6/10 10mm 6/10

15-25mm 8 5/8 10-20mm 5/8 10-20mm 5/8

25-75mm 6-8 4/6 5/8 20-30mm 4/6 20-30mm 4/6

75-150mm 4-6 3-4 4/6

150-260mm 3 2/3

6

WORK HOLDING

6” & 8” HYDRAULIC MACHINE VICE (12” Opening)

◼ Rugged construction

◼ Body is made of high quality ductile cast iron for extra rigidity

◼ Sliding bedways flame hardened and ground

◼ Concealed spindle for extra protection

◼ Hydra booster system for extra clamping pressure

◼ Quick action clamping

◼ Swivel base

◼ Draw down jaws

Dimension A B C D E F G H

VH-6 150 51 800 620 240 133 82 125

VH-8 200 65 800 710 280 158 100 180

Dimension X Y Z Max clamp force G.W.Kg

VH-6 0-100 98-200 195-300 4500 kgs 65

VH-8 0-100 98-200 195-300 6500 kgs 110

XYZ Part No. Description Jaw Width Max open Price

5523 Hydraulic 6” Vice (VH-6) 150mm 300mm £520.00

7580 Hydraulic 8” Vice (VH-8) 200mm 300mm £730.00

WORK HOLDING

7

WORK HOLDING

6” A-TYPE MACHINE VICE

◼ High grade iron vice body

◼ Low overall height

◼ Adjustable positioner

◼ Moving jaw runs in long prismatic slides with provision for new adjustment

◼ Hardened and ground steel jaw plates

◼ Enclosed ACME screw with phosphor bronze nut

◼ Optional swivel base

◼ Drop forged handle

◼ Leadscrew protected against dirt and swarf


6071 6” A-Type Vice 150mm 165mm £410.00

1766 Swivel base for above £120.00

13576 Swivel Handle £48.00

3711 Vice Nut £46.00

3712 Vice Screw £49.00

Optional Swivel Handle Part No. 13576

Jaw

Width Max Jaw Opening

Jaw Depth

Overall Base Size

Overall Height

Clamp Bolt Centre

Weight

Dimensions 150mm 165mm 50mm 400 x 220mm 100mm 195 x 395mm 35kg

KURT MACHINE VICE

◼ Large 8.8” jaw opening

◼ Outside rail edges of the body are machined

◼ Vice nut does not extend beyond the end of the vice body

◼ Patented o ring pull down feature

◼ Approximately a 20% increase in clamping pressure

◼ Quick action clamping

◼ Sealed needle thrust bearing used at hex end of screw to reduce clamping friction

◼ Distinctive design of the Kurt look


4982 D688 Kurt Vice 6” 8.8” £670.00

13991 3600V Kurt Vice For 2-OP Machine 6” 8.8” £860.00

14879 Standard Hard Jaws To Suit Kurt 6" Vice D688 (Pair) 6” £108.00

15268 Soft Jaws For Kurt Vice D688 3600V (Pair) 6” £104.00

Vice Nut Part No. 3711

8

WORK HOLDING

K-TYPE MACHINE VICE

◼ Body and moveable jaw made of close grained high tensile iron castings

◼ Built for heavy duty machining with retained accuracy

◼ Jaw plates of hardened and ground tool steel

Dimension E A B H R S a b h1 h2 g1 g2 G.W.kg

200 576 215 144 150 620 230 230 58 45 18 18 (W) 58

XYZ Part No.

Description Jaw

Width Max

Open Price

5528 8” K-Type Vice 200mm 150mm £441.00

52 PIECE STEEL CLAMPING KITS (For King Rich mills, Mini Mills & VMC’s)

Heat treated steel black oxide finish. Block size 25mm. Set in rack consists of: 24 pcs Stud (75, 100, 125, 150, 175 and 200mm)

◼ 6 pcs T-nuts

◼ 4 pcs Coupling nuts

◼ 6 pcs Flange nuts

◼ 6 pcs Step clamps

◼ 6 pcs Step blocks

◼ Can be wall mounted for tidy and compact storage


1839 52 piece steel clamping kit (for 16mm slots) M12 studs £99.80

1840 52 piece steel clamping kit (for 18mm slots) M16 studs £126.00

9

WORK HOLDING

SEMI-UNIVERSAL DIVIDING HEAD (includes chuck and tailstock)

◼ Dividing heads can divide in any angle by direct, indirect, or differential methods. The ratio between the worm and the worm gear is 40:1.

◼ Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground.

◼ The swivel head can be locked in any angle from 10° below horizontal to 90° vertical. Precision fitting to base assures smooth rotation.

◼ All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2, 3, 4, 6, 8, 12 and 24.

◼ Easy indexing of all numbers from 2 to 50 and many from 52 to 380. Model BS-2 is also equipped for differential indexing of all numbers from 2 to 380, and for spiral cutting.

No. of holes per dividing plate

PLATE A 15 16 17 18 19 20

PLATE B 21 23 27 29 31 33

PLATE C 37 39 41 43 47 49

Semi-universal index B & S Type No. 0, No. 1 (Headstock)

Type A B H h a b g Taper of centre

Diameter of spindle hole

BS-0 (mm) 189 140 173 100 160 91 13 B & S No. 7 18

BS-1 (mm) 293 158 220 128 207 114 16 B & S No. 9 20

BS-2 Universal dividing head with 132.7mm centre height

Semi-universal index B & S Type No. 0, No. 1 (Tailstock)

Type A1 B1 H1 h a1 b1 g1

BS-0 (mm) 167 80 107.5 100 130 92 13

BS-1 (mm) 191 88 137 128 150 108 16

BS-2 Universal dividing head with 132.7mm centre height


1811 BS0 Dividing head with 125mm chuck and tailstock £750.00



10

WORK HOLDING

HORIZONTAL / VERTICAL ROTARY TABLE

◼ Table is made of high density Meehanite grade iron.

◼ Worm is hardened and ground.

◼ Ratio of 90:1.

◼ Work table is graduated a full 360° so one turn of handle move table 4°.

◼ Micro collar graduated in steps of 1' min.

◼ Vernier scale makes quick settings.

◼ Excellent performance, practical design and reasonable cost

◼ Perfect for circular work, angle setting, boring, spot facing etc.

Item No. Testing objective Variation-maximum tested

Item No. 1 Flatness of clamping surface (Concave) 0.0006”/0.015mm

Item No. 2 Parallelism of clamping surface to base 0.0008”/0.020mm

Item No. 3 Squareness of clamping surface 0.0006”/0.015mm

Item No. 4 True running of clamping surface 0.0006”/0.015mm

Item No. 4 True running of centre hole, measured at hole edge 0.0008”/0.020mm

Item No. 4 True running of centre hole, measured at Arbor 4-in long 0.0006”/0.015mm

Item No. 5 Indexing accuracy of direct indexing mechanism maximum 45°

HV-10 HV-12 HV-14 HV-16

Table: Outer diameter - A1 110mm 130mm 130mm 150mm

Table: Outer diameter - D 250mm 300mm 350mm 406mm

Table: Height - H 115mm 135mm 140mm 155mm

Base dimension - H1 165mm 195mm 230mm 255mm

Base dimension - A 325mm 388mm 450mm 500mm

Base dimension - B 280mm 330mm 380mm 430mm

Width of T-slot - e 14mm 16mm 16mm 16mm

T-slots type

Bolt slots - g 17mm 18mm 18mm 18mm

Centre sleeves MT-3 MT-4 MT-4 MT-4

Gross weight wooden case 45kg 85kg 100kg 135kg


2109 10” Horizontal/vertical rotary table - HV 10 £570.00



2112 16” Horizontal/vertical rotary table - HV16 £1820.00

11

WORK HOLDING


14931 SLX 425 Range 15-280mm

£1880.00

16684 SLX 555 1.75 Range 15-280mm

£3470.00

16685 SLX 555 3 Metre Range 15-280mm

£3570.00

16686 XL 1100 Range 15-280mm

£3990.00

12

MACHINE ACCESSORIES

RENISHAW ACCESSORIES

◼ Reduces scrap

◼ Lower costs reduce the number of skilled operators

◼ Reduce setting times

◼ Higher utilisation of machines

◼ Improve forecasting predit how long setting will take and plan accordingly

◼ Shorten manufacturing lead times

◼ Greater agility

◼ Protect revenues & margins


14491 Renishaw 6 Months Primo Token (Includes Primo Total Protect) £494.00

14492 Renishaw Lifetime Primo Token (Excludes Primo Total Protect) £2780.00

7447 Renishaw Job Contact Probe £378.00

815 Stylus For Renishaw OMP 40 Length 100mm Probe Tc/Sp £66.20

1986 Stylus For Renishaw OMP 40 Length 50mm Probe Tc/Sp £63.00

12116 Lithium cell, DL CR2 Battery For Primo £9.45

13

MACHINE ACCESSORIES

HEIDENHAIN PROBE & ACCESSORIES


16732 TS 460 & TT 160 Job And Datum Setting Probe (WIRED) £4580.00

16733 TS 460 & TT 460 Job And Datum Setting Probe (WIRELESS) £5850.00

16734 TS 460 Job And Datum Setting Probe Only £3450.00

17501 TT 160 Tool Setting & Broken Tool Detection System (WIRED) £1320.00

16736 TT 460 Job & Datum Setting Spindle Probe (Wireless) £3410.00

XYZ Part No.

Description Price

16739 Stylus For TS460 40mm Long x 4mm Ball

£60.10

16740 Stylus For TS460 60mm Long x 4mm Ball

£60.10

16741 Disc / Contact For TT 160 / TS 460 40mm dia

£155.00

16742 Break Stem For TT160 / TS 460

£36.96

8874 Battery For TS 460 £22.34

17209 CR 2450 For TNC Buffer

£11.13

HEIDENHAIN Spares

14

MACHINE ACCESSORIES

HALOGEN WORK LIGHTS

◼ Dust proof luminaire head

◼ Articulated arm 190 x 280mm

◼ Universal base


15824 LED Worklight - ( For VL / SLX lathes) £168.00

16176 LED Worklight 110V - ( For SMX 3500, 4000 & 5000 Bed Mills) £168.00

16177 LED Worklight 24V - ( For SMX Turret Mills) £168.00

4471 Halogen Worklight - 110 VOLT ( For VM / SMX Bed Mills) £147.00

4874 Halogen Worklight Extended Arm - 24 VOLT 70W £147.00

AIR POWERED DRAWBARS

◼ Suits all turret mills.

◼ Available for R8, ISO 30, ISO 40 spindles.

◼ High torque air motors.

◼ Complete with air regulators

◼ Increase productivity with only 5 seconds tool change.


10000 Powered Drawbar - R8 £800.00

10987 Powered Drawbar ISO 30 - M12 £800.00

10988 Powered Drawbar ISO 40 - M16 £800.00

ELECTRONIC POWER FEED UNITS FOR MANUAL MILLING MACHINES

Electronic variable speed power feeds.

◼ Available to fit X, Y, or Z axis

◼ Smooth variable speed control.

◼ Rapid override.

◼ Thermal cut-out to prevent damage.

◼ Feed range 8-800mm/min


4894 Align Power Feed AL400S - X AXIS £441.00

4895 Align Power Feed AL400S - Y AXIS (Cross) £780.00

4896 Align Power Feed AL400S - Z AXIS (Knee) £570.00

13900 Align Power Feed x Axis For SLV £530.00

15

MACHINE ACCESSORIES

DRILLING ATTACHMENTS

◼ Holds larger drills & boring bars

◼ Precise accuracy for drilling & boring

◼ Fixes to the cross slide so easy to fit and very secure allowing no movement during machining

XYZ Part No. Bore Description Price

7725 40mm Drilling Attachment 40mm Bore For 355 Lathe £790.00



11319 75mm Drilling Attachment 75mm Bore For 555 x 3M ONLY £1310.00

13795 40mm Drilling Attachment 40mm Bore For XL 780 Lathe £1560.00

GRIPPEX AUTO BAR PULLERS

◼ The bar puller makes your CNC lathe more effective right away

◼ Instant setup– gripping Is secured without any Adjustment

◼ Compact and light adjacent turret tool positions need not be vacated


7195 Grippex Auto Bar Puller 2-60mm Cap VDI30 for CT 52 £1250.00

15875 Grippex Auto Bar Puller 3-80mm to suit CT 65 £1340.00

2747 Grippex Auto Bar Puller 3-80mm For XYZ TC 250, 320LTY, 400 £1250.00

12643 Grippex Gripping Fingers 2-60mm capacity £105.00

17514 Grippex Gripping Fingers 3-80mm capacity £111.00

7138 Grippex 115 Gripping Insert Tips 2-60mm / 3-80mm £111.00

17515 Grippex GPX-II-1 Shaft for 3-80mm Capacity £308.00

Shanks

• Straight 25, 32, 40mm

• VDI 30, VDI 40

Shanks


• VDI 20, VDI 30

Shanks


• VDI 16, VDI 20

Gripping Fingers

• 2 - 60mm

• 3 - 80mm

• 7 - 105mm

Gripping Fingers

• 2 - 52mm

Gripping Fingers

• 0 - 38mm (with gripping fingers)

• 0 - 38mm (with robot fingers)

Inserts

• Gripping Inserts (IF)

Inserts

• Gripping Inserts (IF)

Option Inserts

• Robot Inserts (RI)

Option Inserts

• Robot Inserts (RI)

• Robot Jaws (RJ) for 3 - 80mm • Robot Jaws (RJ-M) for robot fingers

Grippex Large Grippex Small Grippex Mini

16

LATHE TOOL HOLDING

BISON TOOL POST AND HOLDERS

Bison T1T Quick Change Toolposts for manual machines


5647 Toolpost set c/w 4 Standard, 1 Vee and 1 MT1 Holder 63.5mm £680.00

6957 Extra standard holder 22mm Gap £72.50

8205 Extra vee Holder £87.20

7339 Extra morse taper 1 holder £97.70

10631 Extra plain bore holder 25mm £94.50

Bison T2T Quick Change Toolposts for manual machines and ELX 1440, SLX1630 & SLX355


4929 Toolpost set c/w 4 Standard, 1 Vee and 1 MT2 Holder 76mm £830.00

4938 Extra standard holder (Gap 28.5mm) £85.10

4939 Extra vee holder £87.20



Bison T3 Quick Change Toolposts for manual machines and SLX425 & SLX555


4928 Toolpost set c/w 4 standard, 1 Vee and 1 MT3 Holder 95.5mm £830.00

4930 Extra standard holder (Gap 35mm) £111.00

4931 Extra vee holder (Gap 35mm) £124.00



17

LATHE TOOL HOLDING

BISON TOOL POST SPARES

Description Axis Part

No. Code No. Used ON Price

HEX WRENCH

10879 446 100 T0, T1, T1X £16.80

10880 446 201 T2, T2T £18.90

10881 446 303 T3, T3HX £23.10

CLAMP BOLT

10882 441 207 T0, T1, T1X £34.65

10883 441 400 T2, T2T £44.10

10884 441 502 T3, T3HX £44.10

STOP

10885 449 102 T0, T1, T1X £16.28

10886 449 204 T2, T2T £16.28

10887 449 306 T3, T3HX £18.00

LOCATION PIN

10888 442 300 T1, T1X £13.13

10889 442 401 T2, T2T £13.13

10890 442 503 T3 £14.80

CLAMP PAD

10894 440 206 T0, T1, T1X £15.50

10895 440 400 T2T £17.33

10896 440 501 T3, T3HX £14.80

STOP SCREW

10900 U-6877/1 T0, T1, T1X £2.73

10901 U-7386/1 T2, T2T £4.10

10902 U-6881/1 T3, T3HX £5.36

T-WRENCH

10903 700 201 T0, T1, T1X £21.53

10904 700 507 T2, T2T £22.58

10905 700 802 T3, T3HX £24.15

SPRING

10891 443 107 T0, T1, T1X £2.31

10892 443 209 T2, T2T £1.68

10893 443 300 T3, T3HX £2.52

ADJUSTABLE SPINDLE BACKSTOP

◼ Spindle Backstop for main machine spindle

◼ For repeated positioning of bar type work pieces

◼ Easy to fit, remove or re-position the stop

This product is essential for every “Turner”. It fits into the spindle tube and is locked into the required position by means of an extended hexagon key.

Supplied complete with extended hexagon key and instructions for use.

XYZ Part No. Bore Description Price

8435 42mm Adjustable Spindle Backstop - VL300 £294.00

7566 52mm Adjustable Spindle Backstop - SLX 355 & CT52 £294.00

10283 54mm Adjustable Spindle Backstop - SLX 1630 & PRO350 £294.00

7567 80mm Adjustable Spindle Backstop - SLX 425 & PRO410 £294.00

8957 104mm Adjustable Spindle Backstop - SLX 555 £326.00

15884 65mm Adjustable Spindle Backstop - CT 65 £294.00

18

LATHE TOOL HOLDING


5200 Carbide tip dead centre (60°) MT2 £16.80




2646 Revolving centre (60°) MT3 £116.00




5204 Interchangeable Point Set c/w 7 various points MT3 £189.00



Specification 2646 2670 2686 5204 5205 5206 10981

Centre position 0.003mm 0.003mm 0.005mm 0.01mm 0.01mm 0.015mm 0.01mm

Overall length 165mm 200mm 265mm 165mm 200mm 270mm 333mm

Body diameter 42mm 47mm 65mm 42mm 47mm 83mm 130mm

Maximum RPM 3000 2500 2000 3000 2500 2500 2000

Maximum load 400kg 700kg 1500kg 400kg 700kg 1800kg 3500kg

LATHE CENTRES (PRECISION ACCURACY)

Revolving Centres

◼ Hardened and precision ground.

◼ Thrust bearings for axial load.

◼ Roller bearings for centrifugal load.

◼ Hardness 60 HRC

Interchangeable Point Centre Sets


◼ Complete with a selection of various points

Carbide Tipped Dead centres


◼ Concentricity within 0.005mm.

◼ Point hardness 70 HRC

19

LATHE TOOL HOLDING

LATHE CHUCKS

◼ 3 Jaw Chucks

◼ 4 Jaw Chucks

Please Note: XYZ can supply soft jaws and hard jaws for Lathe Chucks. See our web shop for more details.

Bison 3 Jaw Chucks with Internal / External Hard Jaws

XYZ Part No. Description Body Type Max RPM Price

7511 160mm Chuck with D1-4 Camlock Steel 4600 £680.00



12013 250mm Chuck with D1-8 Camlock 76.9mm Bore Steel 3500 £1130.00

13081 250mm Chuck with D1-8 Camlock 91mm Bore Cast Iron 2500 £880.00




13770 500mm Chuck with A2-11 Mount Steel 1300 £6620.00

Bison Independant 4 Jaw Cast Iron Chucks

XYZ Part No. Description Max RPM Price

878 200mm Chuck with D1-5 Camlock 1800 £550.00




13840 630mm Chuck with A2-11 Mount 550 £3940.00

Pratt Independant 4 Jaw Cast Iron Chucks

XYZ Part No. Description Max RPM Price

12738 200mm Independent Chuck 4 Jaw with D1-4 Camlock 2300 £670.00

20

LATHE TOOL HOLDING

◼ Pratt Chuck Soft Jaws


7783 Soft Jaws for 160 mm Dia 3 Jaw Chuck £38.85





◼ Bison Chuck Soft Jaws









◼ Strong Chuck Soft Jaws


7991 Soft Jaws for 250 mm Dia. 3 Jaw Chuck £57.30

7992 Soft Jaws for 200 mm Dia. 3 Jaw Chuck £68.30

◼ Hydraulic Chuck Soft Jaws


9976 Soft Jaws for 160 mm Dia Chuck for CT52 & 150TC £39.90

3097 Soft Jaws for 200 mm Dia Chuck for 200 TC £68.00

3098 Soft Jaws for 250 mm Dia Chuck for 250 TC £68.30

11925 Soft Jaws for 315 mm Dia Chuck for 320 TC LTY £71.40

21


MILL STAR DIGITAL READOUT KIT

Included in the kit: cast arm, 3 sized adjustable quill brackets, bolts, fitted digital scale, battery and instructions.

◼ Travel: 153mm (6”)

◼ Resolution: 0.01mm (0.0005”)

◼ LCD Display: 10mm character height

◼ Battery: 1.5V SR44

◼ Working temperature: 0 - +40°C

Mill Star digital readout kit offers an easy fitment to some of the most common machine quills, including the Bridgeport vertical milling machines. The kit is supplied with several different fittings and instructions, allowing for a quick installation. The Mill Star is constructed from a heavy duty cast fixing arm with a hard wearing powder coating finish. The cast arm is secured to the machine secured to the rear of the display head. This attaches to the existing quill providing the drive for the reading head. The easy to read LCD display will switch between metric and imperial reading. The unit can be set to zero in any position allowing easy depth setting. A data value can also be entered using the arrow keys on the display. Compatible machines: XYZ 1500, 2000, 3000 series machines, most Bridgeports and similar turret mills. XYZ Part No. Price

4577 £273.00

RIGHT ANGLE ATTACHMENT FOR MILLING MACHINES WITH QUILLS

◼ Adds a new dimensions to the turret mill.

◼ Available to suit R8 and ISO 40 spindles.

XYZ Part No.

Description Price

4843 R8 Right angle milling attachment, for quills 3.3/8” diameter £540.00

5924 ISO 40 Right angle milling attachment, for quills 4.1/2” diameter £780.00

5925 ISO 40 Right angle milling attachment, for quills 4.1/8” diameter £780.00

HORIZONTAL MILLING ATTACHMENT FOR MILLING MACHINES WITH QUILLS

◼ Complete with Arbor, collars, Arbor support and right angle attachment, for slitting saws, side and face cutters etc.

◼ Available to suit R8 and ISO 40 spindles.

XYZ Part No.

Description Price

453 R8 Horizontal milling attachment £770.00

676 ISO 40 Horizontal milling attachment £1000.00

22


ER COLLETS TO DIN 6499

◼ Precise accuracy.

◼ Powerful clamping.

◼ Full 1mm collapse without loss of concentricity.

◼ Use for milling, drilling, rigid tapping and reaming etc.

◼ No need to hold a special collet for a fractional size or 1/2mm increment.

L mm D mm DIN 6343 standard

precision mm XYZ standard precision mm

6 1.0-1.4 0.02 0.015

10 1.5-2.9 0.02 0.015

16 3.0-5.9 0.02 0.015

25 6.0-9.9 0.02 0.015

40 10.0-17.9 0.03 0.02

50 18.0-26.0 0.03 0.02

Type A B

ER 16 17 27

ER 32 33 40

ER 40 41 46

ER 16 ER 32 ER 40

Collet size Ref No. XYZ Part

No. Price Ref No.

XYZ Part No.

Price Ref No. XYZ Part

No. Price

1 to 0.5 ER 16010 4991 £16.00

2 to 1 ER 16020 4992 £16.00

3 to 2 ER 16030 4993 £16.00 ER 32030 5002 £16.00

4 to 3 ER 16040 4994 £16.00 ER 32040 5003 £16.00

5 to 4 ER 16050 4995 £16.00 ER 32050 5004 £16.00 ER 40050 5020 £18.00

6 to 5 ER16060 4996 £16.00 ER 32060 5005 £16.00 ER 40060 5021 £18.00

7 to 6 ER 16070 4997 £16.00 ER 32070 5006 £16.00 ER 40070 5022 £18.00

8 to 7 ER 16080 4998 £16.00 ER 32080 5007 £16.00 ER 40080 5023 £18.00

9 to 8 ER 16090 4999 £16.00 ER 32090 5008 £16.00 ER 40090 5024 £18.00

10 to 9 ER 16100 5000 £16.00 ER 32100 5009 £16.00 ER 40100 5025 £18.00

11 to 10 ER 32110 5010 £16.00 ER 40110 5026 £18.00

12 to 11 ER 32120 5011 £16.00 ER 40120 5027 £18.00

13 to 12 ER 32130 5012 £16.00 ER 40130 5028 £18.00

14 to 13 ER 32140 5013 £16.00 ER 40140 5029 £18.00

15 to 14 ER 32150 5014 £16.00 ER 40150 5030 £18.00

16 to 15 ER 32160 5015 £16.00 ER 40160 5031 £18.00

17 to 16 ER 32170 5016 £16.00 ER 40170 5032 £18.00

18 to 17 ER 32180 5017 £16.00 ER 40180 5033 £18.00

19 to 18 ER 32190 5018 £16.00 ER 40190 5034 £18.00

20 to 19 ER 32200 5019 £16.00 ER 40200 5035 £18.00

21 to 20 ER 40210 5036 £18.00

22 to 21 ER 40220 5037 £18.00

23 to 22 ER 40230 5038 £18.00

24 to 23 ER 40240 5039 £18.00

25 to 24 ER 40250 5040 £18.00

26 to 25 ER 40260 5041 £18.00

23


SPARES FOR COLLET CHUCKS

Locknuts

XYZ Part No. For collet chucks Price

5207 ER 16 £15.00

5209 ER32 £19.00

5210 ER 40 £24.00

Wrenches

XYZ Part No. For collet chucks Price

5243 ER 16 £8.00

5071 ER32 £12.00

5072 ER 40 £15.00

VERTEX ORTLIEB STYLE COLLETS (OZ25) TO DIN 6388

XYZ Part No. Size XYZ Part No. Size Price Price

5492 3mm 5491 9/16” £19.95 £19.95

5483 1/8” 5504 15mm £19.95 £19.95

5493 4mm 5488 5/8” £19.95 £19.95

5484 3/16” 5505 16mm £19.95 £19.95

5494 5mm 5506 17mm £19.95 £19.95

5495 6mm 5477 11/16” £19.95 £19.95

5482 1/4” 5507 18mm £19.95 £19.95

5496 7mm 5508 19mm £19.95 £19.95

5487 5/16” 5485 3/4” £19.95 £19.95

5497 8mm 5509 20mm £19.95 £19.95

5498 9mm 5478 13/16” £19.95 £19.95

5486 3/8” 5510 21mm £19.95 £19.95

5499 10mm 5511 22mm £19.95 £19.95

5500 11mm 5490 7/8” £19.95 £19.95

5489 7/16” 5512 23mm £19.95 £19.95

5501 12mm 5479 15/16” £19.95 £19.95

5481 1/2” 5513 24mm £19.95 £19.95

5502 13mm 5514 25mm £19.95 £19.95

5503 14mm 5480 1” £19.95 £19.95

24


PRECISION COLLETS, R8

Model Size Threads for drawbar

R8 Fractional 1/16” to 3/4” Metric 2mm to 20mm

7/16” UNF x 20

XYZ Part No. Size Price XYZ Part No. Size Price

5380 1/16” £51.50 5388 7/16” £16.80

5393 2mm £51.50 5403 12mm £16.80

5394 3mm £16.80 5387 1/2” £16.80

5381 1/8” £16.80 5404 13mm £16.80

5395 4mm £16.80 5405 14mm £16.80

5382 3/16” £16.80 5389 9/16” £16.80

5396 5mm £16.80 5406 15mm £16.80

5397 6mm £16.80 5390 5/8” £16.80

5383 1/4” £16.80 5407 16mm £16.80

5398 7mm £16.80 5408 17mm £16.80

5385 5/16” £16.80 5391 11/16” £16.80

5399 8mm £16.80 5409 18mm £16.80

5400 9mm £16.80 5410 19mm £16.80

5386 3/8” £16.80 5392 3/4” £16.80

5401 10mm £16.80 5411 20mm £16.80

5402 11mm £16.80

25


PRECISION COLLETS, 5C

Model Size Threads for drawbar

5C Fractional 1/4” to 1.1/8”

Metric 3mm to 25mm 1.5/16” UNF x 20

XYZ Part No. Size XYZ Part No. Size Price Price

5372 3mm 5346 5/8” £23.10 £23.10

5338 1/8” 5361 16mm £23.10 £23.10

5373 4mm 5362 17mm £23.10 £23.10

5339 3/16” 5347 11/16” £23.10 £23.10

5374 5mm 5363 18mm £23.10 £23.10

5375 6mm 5364 19mm £23.10 £23.10

5340 1/4” 5348 3/4” £23.10 £23.10

5376 7mm 5366 20mm £23.10 £23.10

5341 5/16” 5349 13/16” £23.10 £23.10

5377 8mm 5367 21mm £23.10 £23.10

5378 9mm 5368 22mm £23.10 £23.10

5342 3/8” 5350 7/8” £23.10 £23.10

5355 10mm 5369 23mm £23.10 £23.10

5356 11mm 5351 15/16” £23.10 £23.10

5343 7/16” 5370 24mm £23.10 £23.10

5357 12mm 5371 25mm £23.10 £23.10

5344 1/2” 5352 1” £23.10 £23.10

5358 13mm 5353 1.1/16” £23.10 £23.10

5359 14mm 5354 1.1/8” £23.10 £23.10

5345 9/16” 5379 Emergency £23.10 £32.44

5360 15mm £23.10

26


SPEED INCREASERS

The CTL Centreline speed increaser.

◼ 4:1 ratio

◼ ER 16 collet chuck.

◼ 10mm cutter capacity.

◼ Speeds up to 20,000 RPM

◼ Enables high speed machining techniques on traditional mills.

The CTL Centreline Speed Increaser allows users of turret mills and older machine tools to increase spindle speeds up to the levels required by modern tooling at an affordable price. The speed increaser represents a small investment that brings big returns in higher productivity and improved surface finish, giving new life to the one million turret mills in use worldwide that would otherwise be unable to meet the requirements of mod-ern machining techniques. Available in versions to suit all major makes of machine tool, the Centreline Speed increaser can be supplied with R8, ISO30, ISO40 tapers and other drives for both manual and automatic tool change. The unit is factory sealed for a maintenance free life.

Why invest in a Speed Increaser?

◼ EGI-Milling aluminium slot with SMX3500 Mill (top speed 5000rpm, max feed 2540mm/min) using three flute car-bide end mill.

Without Speed Increaser @ 3600rpm, max feed = 756mm/min With Speed Increaser 4:1 Speed Increaser 3000rpm in/12000rpm out, max feed = 2520mm/min

◼ EG-2 Engraving tool steel with SMX2000 Mill (top speed 4200rpm, max feed 2540mm/min) using 1.5mm carbide slot drill.

Without Speed Increaser @ 4200rpm, max feed = 126mm/min With Speed Increaser 4:1 Speed Increaser 3000rpm in/12000rpm out, max feed = 360mm/min

XYZ Part No. Shank Price

5281 R8 £2610.00

5087 ISO 30 £2610.00

5121 ISO 40 £3070.00

4971 BT 40 £3420.00

27


ER SPRING COLLET CHUCK SET

Collet chuck kits R8

◼ Includes shank, full set of collets, wrench and case.

◼ For milling and drilling.

◼ ER16 set for 1mm-0mm to 10mm-9mm.



◼ Full 1mm collapse of collet with concentricity maintained.

XYZ Part No. Shank Collet size Collet range No. of collets

5322 R8 ER 16 1-0 to 10-9 10 £200.00

5323 R8 ER 32 3-2 to 20-19 18 £305.00

5324 R8 ER 40 5-4 to 26-25 23 £431.00

Boxed set with holder, collets and wrench

ER COLLET CHUCKS

XYZ Part No. Shank Collet size Gauge length Collet range Price

5277 R8 ER 16 32mm 1-0 to 10-9 £73.50

5278 R8 ER 32 50mm 3-2 to 20-19 £78.80

5280 R8 ER 40 76mm 5-4 to 26-25 £84.00

FACE MILL ARBORS

◼ Holding indexable face mills and HSS shell mills.

◼ 22mm dia, 27mm dia spigots

XYZ Part No. Shanks Spigot Dia Gauge length For cutter dia Price

5285 R8 22mm 15mm 50mm, 63mm £66.20

5286 R8 27mm 15mm 80mm £66.20

XYZ Part No. Shanks Inside MT Number Gauge length Price

5282 R8 1 15mm £50.40

5423 R8 2 20mm £50.40

5424 R8 3 40mm £50.40

5222 MT2 1 £8.40

5230 MT3 2 £8.40

5233 MT4 3 £18.90

5239 MT5 4 £21.00

MORSE TAPER ADAPTORS AND SLEEVES

28


PRECISION BORING HEAD SETS

◼ Simple to use, yet very rigid construction.

◼ Perfectly balanced for high speed operation.

◼ 0.01mm resolution (dia) adjustment.

◼ All parts hardened, all working surfaces ground.

Set consists of:

• Adjustable boring head C/W shank.

• 2 off end holes 20mm dia. (1 x centred, 1 x offset)

• 1 off crosshole 20mm dia.

• 3 off boring tools.

• 1 off square brazed carbide tool bit.

• Offset arms and reduction bushes.

• Durable plastic case. Boring head sets

XYZ Part No. Shanks Diameter Range Gauge length Price

5441 R8 5 - 250mm 102mm £570.00

5440 ISO 40 Tapped M16 5 - 250mm 106mm £570.00

5439 ISO 40 Tapped 5/8” UNC 5 - 250mm 106mm £570.00

4953 BT 40 5 - 250mm 106mm £570.00

PRECISION BORING AND FACING HEAD SETS

◼ Simple to use, yet very rigid construction.

◼ Perfectly balanced for high speed operation.

◼ 0.01mm resolution (dia) adjustment.

◼ All parts hardened, all working surfaces ground.

Use for: Boring, Facing (inside to out), Taper turning, Recessing, Facing (outside to in), Taper boring, Over turning, Back facing.

Set consists of:

• Adjustable boring and facing head C/W shank.

• 3 off end holes 18mm dia. (1 x centred, 2 x offset)

• 1 off crosshole 18mm dia.

• 4 off boring tools.

• 1 off square HSS toolbit.

• Offset arms and reduction bushes.

• Stop arm (for facing).

• Durable plastic case.

XYZ Part No. Shanks Diameter Range Gauge length Price

5269 R8 5 - 250mm 118mm £1020.00

5096 ISO 40 Tapped M16 5 - 250mm 116mm £1080.00

4952 BT 40 5 - 250mm 164mm £1080.00

Universal boring and facing master head sets

29


TAPMATIC TAPPING ATTACHMENTS

Self reversing tapping attachments for:

◼ Manual drills and manual mills with a manual quill feed.

◼ CNC mills with a manual quill feed.

XYZ Part No. Tapping capacity Style Mount Collets Price

4813 M1.4 to M6 RX30 J6 J116, J117 £560.00

4815 M3 to M12 RX50 J6 J421, J422 £740.00

40 M5 to M18 RX70 Threaded 7/8” x 20 J443, J440 £1100.00

PLEASE NOTE: Remember to add the Arbor & Collets to the price of this tapping attachment.

See page 26 for taper arbors and for collets

Non reversing tapping attachments for:

◼ Machining centres (ALL VMC’s) and CNC mills with rigid tapping


4826 M3 to M12 SM42 20mm sidelock J421, J422 £147.00




See page 26 for collets

Self reversing tapping attachments for:

CNC mills with powered Z axis feed (SM / SMX2500)


4817 M1.4 to M6 SPD 3 J6 J116, J117 £690.00

4818 M3 to M12 SPD 5 J6 J421, J422 £740.00

4819 M5 to M18 SPD 7 Threaded 7/8” x 20 J443, J440 £1010.00


See page 26 for collets

Self feed (tension compression) attachments for:

For CNC machines with spindle reversal (VM / SMX 3500, 4000, 5000) & Proturn Lathes

XYZ Part No. Tapping capacity Style Collets Side Lock

Or Morse Taper

Price

9584 M1.4 to M7 SM2 J115, J443 MT2 - 20mm £315.00

2746 M3 to M12 SM4 J421, J422 MT2 - 20mm £347.00

6093 M5 to M18 SM6 J443, J440, J445 MT3 - 25mm £410.00


30


KEYLESS DRILL CHUCKS

XYZ Part No.

Clamping Range

Female taper

Body Dia

(mm)

Length WT

gram Torque KgF-CM

Max run out

Price Open Closed DIA (mm) L (mm) Max

1853 0-13mm J6 51.5 92 103 1030 400 13 75 0.05 £80.00

5422 3-16mm J6 58 95 108 1450 480 16 80 0.05 £79.80

DRILL CHUCK ARBORS

For mounting drill chucks and tapping attachments.

◼ Choice of Stub Tapers Jacobs (J.T)

XYZ Part No. Shank Stub taper Gauge length Price

5414 R8 JT6 10 mm £60.00

5221 MT2 JT6 £8.40

5220 MT2 B16 £8.40

5228 MT3 JT6 £8.40

5226 MT3 JT3 £8.40

5227 MT3 JT4 £8.40

5232 MT4 JT6 £10.50

5235 MT5 JT6 £31.50

TAPMATIC TAPPING ACCESSORIES

Rubberflex Collets for Tapmatic attachments

XYZ Part No. Collets Price For tap shank diameter

5136 J116 £50.40 2.5mm - 4.5mm

5137 J117 £50.40 4.5mm - 6.5mm

5138 J421 £50.40 3.5mm - 6.5mm

5139 J422 £50.40 6.5mm - 10.0mm

5141 J443 2.8mm - 7.0mm £52.50

5140 J440 7.0mm - 13.0mm £52.50

12615 J445 9.0mm - 15.0mm £57.80

5142 J461 9.1mm - 16.0mm £116.00

5143 J462 16.0mm - 23.0mm £116.00

Threaded Arbors for tapping heads

XYZ Part No. Shank Collets Price

4822 R8 Threaded 7/8” x 20 £126.00

4823 ISO 40 tapped M16 Threaded 7/8” x 20 £137.00

31


TIGHTENING FIXTURE PULL STUD

XYZ Part No.

For shank Price

5449 ISO 40, BT 40 £126.00

XYZ Part No.

For shank Price

13631 BT 30 For 2 OP (Set of 8) £116.00

4977 MAS 1 for BT 40 £17.85

7910 BT 40 for “through spindle coolant” £17.85

15665 BT 40 For UMC-5X / UMC 4+1 £13.65

XYZ Part No.

Description Price

9622 Height Tool Length Setting Gauge £189.00

4576 2 x Spare battery for above £4.20 each

JOB CONTACT PROBE

◼ Touch point sensor.

◼ High sensitivity location sensor.

◼ Battery operated red pilot light and ‘beeper’

◼ Detects locations of end surface, outside diameters and inside diameters.

◼ Beeper is audible when light not visible e.g inside of deep bore.

◼ Body diameter 20mm - fits into a collet chuck or 20mm R8 precision collet.

◼ Ball diameter 10mm - Spindle centre line is 5mm from contact surface.

◼ Ball is spring loaded to avoid damage by overwinding.

◼ Works on continuity


2127 Job contact probe £94.50

9530 Spare battery for above £4.89

HEIGHT PRESETTER

◼ Height 50mm

◼ The red lamp will be lit when touched

◼ Accuracy 0.005mm

◼ Combined vertical and horizontal in a unit

◼ Weight 0.7kgs

XYZ Part No.

Description Price

15453 Quick Release Quill Nut

For 1500 / 2000 / 3000 / 3500 £49.35

15454 Quick Release Quill Nut

For 4000 / 5000 £49.35

32


‘EASY CHANGE’ Tooling System

◼ Suitable for manual machines with R8, ISO 30, ISO 40 and Morse Taper Spindles

◼ Less wear on machine spindle due to master holder staying in place

◼ Rapid change over between tools in just a few seconds

◼ Very accurate - Run-out better than 0.02mm

◼ Single handed operation to remove and fit tools

◼ Allow pre-set tooling to be used

◼ No machine modification required

◼ Variety of tool adaptors available

2) Insert tool and collar automatically returns to closed position and locks.

3) Remove tool with one hand by twisting collar to release tool.

4) Load new tool as before in seconds.

Starter Kit Productivity Kit

R8 Adaptor 1 1

Storage Tray 1 1

Vice Mounted Tightening Fixture 1 1

Customer Choice of METRIC Tool Holders 3 6

Easy Change Voucher Options

XYZ Part No. Price

15819 Starter Kit £570.00

15820 Productivity Kit £800.00

1) Load R8 “Master” holder into machine spindle and set collar in open position

33


‘EASY CHANGE’ Tooling System

Easy Change Master Body

XYZ Part No. Mount Gauge Length Diameter Price

8069 QC 30 39mm 60mm £378.00

6796 QC 40 39mm 60mm £410.00

6795 R8 - 7/16” UNF 27mm 60mm £305.00

ER Collet Chuck XYZ Part No. Collet Type Capacity Gauge Length “A” Price

7604 ER16 1 - 10mm 40mm £116.00

11473 ER20 1 - 13mm 40mm £116.00

6038 ER25 1 - 16mm 45mm £116.00

6908 ER32 2 - 20mm 50mm £116.00

XYZ Part No. Bore Dia Dia “D” Gauge Length “L” Price

7605 6mm 30mm 35mm £90.30

7313 10mm 30mm 35mm £90.30

7314 12mm 30mm 35mm £90.30

7315 16mm 30mm 35mm £90.30

6037 20mm 45mm 55mm £93.50

6040 25mm 55mm 75mm £116.00

End Mill Adaptors

Jacobs Adaptors Morse Taper Adaptors

XYZ Part No. Taper Price

1345 JT3 £76.70

6910 JT6 £76.70

11136 JT33 £76.70

XYZ Part No. Taper Gauge Length Price

6041 MT1 51mm £116.00

6042 MT2 62mm £116.00

11135 MT3 117mm £116.00

Shell Mill Adaptor

XYZ Part No. Spigot Dia

“d” Gauge Length

“L” Spigot Length

“H” Price

Body Dia “D”

6036 16mm 15mm 17mm £116.00 44mm

6044 22mm 15mm 19mm £137.00 50mm

Tightening Fixture

XYZ Part No. Price

8185 £137.00

Tool Tray

XYZ Part No. Price

6909 £51.50

34


ROTARY COOLANT ADAPTORS

◼ Auto Tool Change capability

◼ Maintenance free sealed unit

◼ Variety of tool holding options

◼ 6000 RPM maximum speed

◼ Max coolant pressure 10 bar

The CTL Centreline Rotary Coolant Adaptors allow users of both manual and CNC machines to increase productivity of their machine tool by adding the option for through tool coolant. R.C.A’s can be supplied with either “side lock” or “collet chuck” tool mount in a variety of sizes. All units are designed for Auto Tool Change, but manual units are available.

XYZ Part No. Shank Output Type Price

12027 R8 EMA 16mm £780.00

12028 R8 EMA 20mm £780.00

12029 R8 EMA 25mm £780.00

12030 R8 ER32 CC £810.00

12031 ISO 30 EMA 16mm £780.00

12032 ISO 30 EMA 20mm £780.00

12033 ISO 30 EMA 25mm £780.00

12034 ISO 30 ER32 CC £810.00

12035 ISO 40 EMA 16mm £780.00

12036 ISO 40 EMA 20mm £780.00

12037 ISO 40 EMA 25mm £780.00

12038 ISO 40 ER32 CC £810.00

12039 BT 40 EMA 16mm £840.00

12040 BT 40 EMA 20mm £840.00

12041 BT 40 EMA 25mm £840.00

8710 BT 40 EMA 32mm £840.00

4602 BT 40 ER32 CC £970.00

35


ANGLE HEADS

◼ Auto Tool Change capability

◼ Maintenance free sealed unit

◼ 10mm cutter capacity via ER16 Collet Chuck

◼ 6000 RPM maximum speed

◼ 1:1 Speed Ratio

◼ Can be rotated through 360°

◼ Special applications also available

The CTL Centreline Angle Head allows users of both manual and CNC machines to increase productivity of their machine tool by taking away the need to re-fixture for additional milling or drilling operations. Angle heads can accommodate end mills, drills or taps for machining a variety of materials. All heads are designed for Auto Tool Change, where applicable. NOTE: A Quill clamp will be required for manual machines.

XYZ Part No. Shank Price

12042 R8 * £4750.00

12047 ISO 30 * £4750.00

12048 ISO 40 * £4750.00

12049 BT 40 £4750.00

* Quill clamp required for manual machines.

N.B NOT AVAILABLE ON WEB STORE

36

CHUCK & TAP SIZE CHART

ISO STANDARD TAPS

CHUCK SIZE

TAP SIZE SHANK SQUARE A/F

0

M1 - M2 10, 9 BA 2.50 2.00

M2.2 - M2.5 8, 7, 6 BA 2.80 2.24

M3 4 - 5 UNC / UNF 5 BA 3.15 2.50

M3.5 6 UNC / UNF 4 BA 3.55 2.80

M4 4.00 3.15

M4.5 8 UNC / UNF 3BA 4.50 3.55

M5 10 UNC / UNF 2 BA 5.00 4.00

12 UNC / UNF 1 BA 5.60 4.50

M6 1/4” UNC / UNF 0 BA 6.30 5.00

M7 7.10 5.60

M8 5/16” UNC / UNF 8.00 6.30

1

M4 4.00 3.15

M4.5 8 UNC / UNF 3BA 4.50 3.55

M5 10 UNC / UNF 2 BA 5.00 4.00

12 UNC / UNF 1 BA 5.60 4.50

M6 1/4” UNC / UNF 0 BA 6.30 5.00

M7 7.10 5.60

M8 5/16” UNC / UNF 8.00 6.30

M11 7/16” UNC / UNF 8.00 6.30

M12 1/2” UNC / UNF 9.00 7.10

M9 9.00 7.10

M10 3/8” UNC / UNF 10.00 8.00

M14 9/16” UNC / UNF 11.20 9.00

2

M7 7.10 5.60

M8 5/16” UNC / UNF 8.00 6.30

M11 7/16” UNC / UNF 8.00 6.30

M12 1/2” UNC / UNF 9.00 7.10

M9 9.00 7.10

M10 3/8” UNC / UNF 10.00 8.00

M14 9/16” UNC / UNF 11.20 9.00

M16 5/8” UNC / UNF 12.50 10.00

M18 3/4” UNC / UNF 14.00 11.20

M20 3/4” UNC / UNF 14.00 11.20

M22 7/8” UNC / UNF 16.00 12.50

M24 1” UNC / UNF 18.00 14.00

DIN STANDARD TAPS

CHUCK SIZE

TAP SIZE SHANK SQUARE A/F

0

M1 - M1.80 2.50 2.10

M3 2.50 2.10

M3.5 2.50 2.10

M2 2.50 2.10

M2.6 2.80 2.10

M4 2.80 2.10

M3 3.50 2.70

M5 3.50 2.70

M3.5 4.00 3.0

M4 4.50 3.40

M6 4.50 3.40

M7 5.50 4.30

M5 6.00 4.90

M6 6.00 4.90

M8 6.00 4.90

M10 7.00 5.50

1

M3 3.50 2.70

M5 3.50 2.70

M3.5 4.00 3.00

M4 4.50 3.40

M6 4.50 3.40

M7 5.50 4.30

M5 6.00 4.90

M6 6.00 4.90

M8 6.00 4.90

M10 7.00 5.50

M8 8.00 6.20

M12 9.00 7.00

M10 10.00 8.00

M14 11.00 9.00

2

M10 7.00 5.50

M8 8.00 6.20

M12 9.00 7.00

M10 10.00 8.00

M14 11.00 9.00

M16 12.00 9.00

M18 14.00 11.00

M20 16.00 12.00

M24 18.00 14.50

37

TAPPING DRILL SIZES

Documents

Tooling Product Guide - XYZ Machine Tools Ltdspares.xyzmachinetools.com/pdfs/XYZ Tooling Guide - Web Edition - Oct19.pdf17 bison tool post spares & adjustable spindle back stop 18