Embed Size (px)
Citation preview
TOOLS AND SUPPLIES
Hand ToolsErem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2331Molex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2330TE Connectivity/AMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2329WIHA Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2331
Soldering Tools & ProductsAIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2337Kester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2338Metcal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2332Weller/Xcelite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2333, 2334, 2335, 2336
Bench Top SuppliesTechspray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2339, 2340, 2341, 2342
Supplies3M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2343, 2344Desco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2345MG Chemicals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2346, 2347, 2348, 2349
PrototypingSchmartBoard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2350, 2351Twin Industries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2352Vector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2353
Hand Tools
TE Connectivity
2329
AMP Tools and Accessories
Pistol Grip Hand ToolTOOLS FOR MTA SERIES
MOUSERSTOCK NO. Fig. Description Price
Each571-580741 C Pistol Grip Hand Tool for MTA Series 103.11
JACKNACK TELECOMMUNICATIONS CABLE PREPARATION TOOL• Cable Jack Stripper• Cable Filler Sheer
• JacKnack Clamp• Wire Placement Tool
MOUSERSTOCK NO. Fig. Description Price
Each571-2119000-1 A Cable Preparation Tool for Unshielded Twisted Pair Cable (Cat. 3-6) 49.23
CONTACT INSERTION/EXTRACTION TOOLSMOUSER
STOCK NO. Fig. Description PriceEach
571-910672 F Insertion/extraction, size 20, 22 contacts 8.13571-3188311 G Extraction, .062 Pin and Socket 256.19571-1804030-1 G Extraction, Universal Mate-N-Lok® 46.57571-4558301 H Insertion, Universal Mate-N-Lok® and MR 32.42571-4656441 I Extraction, Commercial Mate-N-Lok® 26.77571-305183 J Extraction, size 16 CPC contacts 16.66571-912851 K Insertion/extraction, size 20, 22 contacts 22.50571-910193 L Extraction, type XII series 3 CPC contacts 278.42571-911241 M Extraction, type XII series 4 CPC contacts 55.04
Interchangeable Head for Pistol Grip Hand Tool571-58246-1 D MTA .100 Series 196.02571-582471 D MTA .156 Series 182.08
“T” Handle Maintenance Tool571-598031 E For MTA .100 Series 30.16571-598041 E For MTA .156 Series 39.15
Professional Hand Tool Kits
571-12316661 - 4-position handset, 4, 6, and 8-position die sets, set ofreplacement strip blades and small screwdriver
366.58
571-2316625 - (1) set of strip blades 5.68
Die Sets Only for Professional Hand Tool
MOUSERSTOCK NO. Fig. Description Price
Each571-8534001 - 8-position line 59.18571-8534003 - 4-position handset 59.18571-8534007 - 6-position long body 192.20571-853400-8 - 4, 6-position line 59.18
TOOLS FOR PCB CONNECTORS AND PIN AND SOCKET CONNECTORSPro Crimper III Hand Tool• Field repair/prototyping• Ratchet control
• Brush/bellmouth control• Precision crimp height control
571-908701 B .062" Pin and Socket cont. 30-24 AWG 282.87571-585141 B Miniature rectangular connectors 270.07571-905741 B Commercial Mate-N-Lok® 24-18 AWG 318.87571-905481 B Universal Mate-N-Lok® 24-18 AWG 257.00571-905461 B Universal Mate-N-Lok® 20-14 AWG 251.88571-584951 B "Series 1" CPC size 16 contacts 212.57571-584482 B "Series 2" CPC size 20 contacts 286.77571-3549401 B Pro-Crimper III frame 102.66571-584231 B Die set for solderless terminals 79.07
“Category 5” High Performance Crimp ToolTOOLS FOR MODULAR PLUGS
MOUSERSTOCK NO. Fig. Description Price
Each571-32316520 N 8-position modular crimp tool with die 170.51
• For use with modular plugs• Cuts, strips, and terminates cable
• All plug sizes, except 10-position, are accommodated using interchangeable die sets
Professional Hand Tools with Die Sets
571-22316521 N 8-position line 171.25571-22316523 N 4-position handset 182.34571-22316527 N 6-position long body 182.22571-22316528 N 4, 6-position line 173.60
• For use with modular plugs• Cuts, strips, and terminates cable
• All plug sizes, except 10-position, are accommodated using interchangeable die sets
A B
C D
E F
G H
I J
K L
M N
mouser.com/te-connectivity (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
Han
d To
ols
Mol
ex
2330
MOLEX Tools
INSERTION AND EXTRACTION TOOLS
TOOLS FOR PCB ANDPIN AND SOCKET CONNECTORS
TOOL MATRIX
MOUSERSTOCK NO. Fig. Description Price
Each538-11-02-0001 A .062" Pin and Socket Insertion Tool 22.10538-11-03-0002 B .062" Pin and Socket Extraction Tool 15.12538-11-01-0168 C .084" Pin and Socket Extraction Tool 27.00538-11-02-0003 A .093" Pin and Socket Insertion Tool 22.28538-11-03-0006 B .093" Pin and Socket Extraction Tool 20.19538-11-02-0022 D 2.54mm SL™ Insertion Tool 15.30538-11-03-0036 B 2.54mm SL™ Extraction Tool 15.30538-11-03-0037 B Disk Drive Extraction Tool 34.32538-63812-0000 B KK-100 Insertion Tool 41.58538-11-03-0022 E KK-100 Extraction Tool 11.97538-11-03-0016 F KK-156 Extraction Tool 15.30538-11-03-0043 G Micro-Fit 3.0™ Extraction Tool 16.20538-11-03-0044 G Mini-Fit™ Jr. Extraction Tool 16.50538-63813-0400 H Mini-Fit™ Sr. Extraction Tool 69.30538-63813-1500 I MX150L™ Extraction Tool 22.28538-63813-2700 F Sabre™ 7.5mm (Female) Extraction Tool 48.51538-63813-0800 J Sabre™ 7.5mm (Male) Extraction Tool 105.96
MOUSERSTOCK NO. Fig. Description Price
Each538-63819-0300 K 1.25mm Crimp Terminal 32-26AWG 237.01538-63811-4800 K 1.27mm Micro-D 28-26AWG 324.50538-63819-0800 K .062" Pin and Socket 30-22AWG 296.26538-63819-1300 L .062" Pin and Socket 24-18AWG 269.00538-63811-1000 M .062" and .093" Pin and Socket 24-14AWG 45.90538-63811-6800 N .084" Pin and Socket 20-14AWG 223.83538-63819-1200 L .093" Pin and Socket 22-14AWG 296.26538-63819-0100 K 2mm Crimp Terminal 296.26538-63819-0500 K 2mm Crimp Terminal 289.42538-63819-0100 K 2mm Milli-Grid™ Crimp Terminal 30-24AWG 296.26538-63811-5200 K 2.50 Spox Crimp Terminal 237.01538-63811-8700 K 2.54mm SL™ 24-22AWG 296.26538-63811-7000 K Disk Drive 22-14AWG 247.50538-63811-7500 K KK-156 24-18AWG 237.01538-63811-6600 K KK-156 30-18AWG 247.02538-63819-0000 K Micro-Fit 3.0™ 30-20AWG 296.26538-63811-2875 - Crimp Tool Locator for 538-63811-2800 35.07538-63819-0900 K Mini-Fit™ Jr. 24-18AWG 236.48538-63819-1000 K Mini-Fit™ Jr. 28-22AWG 237.01538-63811-1500 O Mini-Fit™ Sr. 8AWG 486.00538-63811-1600 O Mini-Fit™ Sr. 12-10AWG 367.20538-63811-4400 O MX150L™ 22-14AWG 316.01538-63811-7200 N Sabre™ 7.5mm (Female) 18-14AWG 320.67
CrimpingTool
InsertionTool
ExtractionTool
Use WithConnector Series
63811-020063811-0300 - 57072-6000 1.25mm Crimp Terminal63811-4800 - - 1.27mm Micro-D11-01-018563811-330063811-1000
11-02-0001 11-03-0002 .062" Pin and Socket
63811-6800 - 11-01-0168 .084" Pin and Socket63811-100063811-3200 11-02-0003 11-03-0006 .093" Pin and Socket11-01-0204 - - 2mm Milli-Grid™ Crimp Terminal63811-870011-01-0209 11-02-0022 11-03-0036 2.54mm SL™11-01-0206 - 11-03-0037 Disk Drive11-01-0185 63812-0000 11-03-0022 KK-10011-01-018563811-750011-01-0203
- 11-03-0016 KK-156
63811-2800 - 11-03-0043 Micro-Fit 3.0™6381-500011-01-019711-01-0198
- 11-03-0044 Mini-Fit™ Jr.
63811-150063811-1600 - 63813-0400 Mini-Fit™ Sr.63811-4400 - 63813-1500 MX150L™63811-7200 - 63813-0500 Sabre™ 7.5mm (Female)63811-0600 - 63813-0800 Sabre™ 7.5mm (Male)
A B
C D
E F
G H
I J
K L
M N
O
mouser.com/molex (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
Hand Tools
2331
ESD Safe Cutters and Tweezers
ESD SAFE CUTTERS
ESD SAFE TWEEZERS• ESD Safe• Anti Static Conductive
• Hypo Allergenic Coated• Textured Gripping Surface
• Anti Magnetic• Acid Resistant
• Made from Vommaloy
“N” SERIES DIAGONAL CUTTERS
CUTTING TWEEZERS
TWEEZERS
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. Size Cut Price Each Mfr. Mfr. Part No.
578-522N A 4 1/2" Medium oval head, Full-Flush 62.40578-612N A 4 1/4" Small oval head, Semi-Flush 68.70578-622N A 4 1/4" Small oval head, Full-Flush 57.20578-622NA A 4 1/4" Tapered head, Full-Flush 67.60578-622NB A 4 1/4" Tapered relieved head, Full-Flush 58.30578-632N A 4 1/4" Small head, Super Full-Flush 62.40
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Length Price
Each Mfr. Mfr. Part No.596-32703 B Side cutters, Small Tapered Head, Form 1-Semi Flush 115mm 54.24596-32705 B Side cutters, Small Tapered Head, Form 2 Flush 115mm 57.20596-32702 B Side Cutters Small Tapered Head with Hollow Ground
Back, Form 3- Semi Flush115mm 55.62
596-32704 B Side cutters, Small Tapered Head with Hollow Ground Back, Form 4-Flush
115mm 55.62
596-32710 B Side Cutters, Wide Tapered Head, Form 3-Full Flush 115mm 59.66596-32712 C Side cutters, Slim Oval Head, Form 1-Flush 115mm 54.24596-32714 C Side cutters, Slim Oval Head, Form 2-Full Flush 115mm 60.98596-32720 C Side cutters, Wide Oval Head, Form 3-Flush 115mm 53.60596-32728 D Oblique Front Cutters, Very Small Head, 40°, Form
4-Flush110mm 62.98
596-32732 E End Cutters, Extra Slim, Form 1-Flush 110mm 64.90596-32734 F End Cutters, Wide Head, Form 2-Flush 115mm 65.44
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Length Price
Each Mfr. Mfr. Part No.596-44501 G Universal Fine Point 130mm 23.10596-44503 H Long Narrow Body Low Force 135mm 28.82596-44505 I Flat Round Tip Smooth Sides ESD safe 120mm 25.60596-44506 G Fine Round Points for Assembly 120mm 25.94596-44508 J Very Fine Points/Tapered to Tip ESD Safe 110mm 26.58596-44509 J Extra Fine Points/Tapered To Tip ESD Safe 110mm 27.86596-44510 K Curved Extra Fine Rounded Tips 120mm 34.70596-44518 L Narrow Rounded Tip Serrated, Guide Pin 150mm 28.44596-44523 G Long Rounded to 1.0mm Wide Serrated 125mm 25.06596-44525 M Curved Extra Fine, 3mm Long Straight Tip 120mm 42.02596-44529 N MicroTip Bent 30° 1mm Wide 120mm 32.12596-44531 G General Purpose Fine Point 120mm 26.56596-44532 G Heavy Duty Strong Tapered to Strong Point 120mm 36.78
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Length Price
Each Mfr. Mfr. Part No.578-2SA O 4.5" medium point - 22.50578-EROP2ASA P 4.5" round point - 3.90578-3SA G 4.75" popular fine point for microelectronics - 27.20578-EROP3SA G 4.5" popular fine point for microelectronics - 3.90578-EROP3CSA G 4.25" popular fine point for microelectronics - 3.90578-5SA G 4.5" superfine point, special shaping - 34.60578-EROP5SA G 4.5" superfine point, special shaping - 3.90578-7SA K 4.75" curved point easy access-confined areas - 29.90578-EROP7SA K 4.75" curved point easy access-confined areas - 3.90578-AASA G 5.0" straight point, hardened tips - 11.60578-EROPAASA G 4.75" strong but fine point - 3.90578-OOSA G 4.75" flat inside edges, general purpose - 21.30578-EROPOOSA G 4.75" flat inside edges, general purpose - 3.90
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. Description Length Price Each Mfr. Mfr. Part No.
578-15AGW Q 4.5" oblique head, long life, soft wire cutting - 31.80578-15AGS Q 4.25" oblique fine head, long life, soft wire cutting - 34.60
• Swiss made• High grade tool steel
• ESD safe• Low fatigue operation
• Guaranteed for over 1 million openings
• Cutting edges are induction hardened at a hardness of Approx. 64°HRC.
• Two component non-slip soft grip handle
• Material: “non-magnetic”, anti-acid alloy • Temperature resistance: 300°C
A B
C D
E F
G H
I J
K L
M N
O P
Q
mouser.com (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Sold
erin
g To
ols
Met
cal
2332
METCAL Solder Systems
Solder Tips For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Size
(mm/in.)Price Each
Mfr. Mfr. Part No. 1 5 10745-SFV-CH20 Chisel Solder Tip 1.80/.04" 10.52 9.98 9.49745-SFV-CH25 Chisel Solder Tip 2.5/.07" 10.30 9.77 9.29745-SFV-CH50 Extra Large Chisel Solder Tip 5.0/.20" 11.66 11.09 10.53745-SFV-CH10A Chisel Solder Tip 1/.039" 14.97 14.22 13.52745-SFV-CH15A Chisel Solder Tip 1.5/.059" 14.97 14.22 13.52745-SFV-CH50A Extra Large Chisel Solder Tip 5/.197" 14.96 14.22 13.52745-SFV-CHB15 Chisel Bent 30° Solder Tip 1.5/.06" 11.66 11.09 10.53745-SFV-CHL24 Chisel Solder Tip 2.4/.094" 14.31 13.59 12.91745-SFV-CN05 Conical Solder Tip 0.5/.02" 11.43 10.87 10.32745-SFV-CNB05 Conical Bent Solder Tip 0.5/.02" 10.50 9.97 9.48745-SFV-CNL04 Conical Long Solder Tip 0.4/.16" 11.66 11.09 10.53745-SFV-CNL10 Conical Long Solder Tip 1.0/.04" 11.43 10.87 10.32745-SFV-CNL14 Conical Log Tip 1.4/.055" 11.43 10.87 10.32745-SFV-DRH20 Conical Solder Tip 1.80/.07" 11.43 10.87 10.32745-SFV-CN05A Conical Solder Tip .5/.02" 12.80 12.16 11.55745-SFV-CNB04A Conical Solder Tip .4/.016" 12.80 12.16 11.55745-SFV-CNL20 Conical Solder Tip 2/.079" 11.66 11.09 10.53745-SFV-DRH20CP Hoof Solder Tip, Drag 2/.079" 20.21 19.20 18.26745-SFV-DRH30CP Hoof Solder Tip, Drag 3/.118" 20.21 19.20 18.26745-SFV-DRH420A Hoof Solder Tip, Drag 2/.079" 16.30 15.48 14.72745-SFV-DRH630A Hoof Solder Tip, Drag 3/.118" 14.97 14.22 13.52745-SFV-DRK45A Knife Solder Tip 4.5/.177" 14.67 13.94 13.25745-SFV-DRK50 Knife Solder Tip 5.0/.20" 11.66 11.09 10.53745-SFV-DRK50S Knife Solder Tip 5/.197" 11.66 11.09 10.53
The HCT-900 is supplied with a standard single jet H-D50 (0.2", 5.0 mm) nozzle.In addition two rework nozzle kits, predefined for specific applications, are available.
HCT Nozzles
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. Chain Type SizePrice Each
Mfr. Mfr. Part No. 1 5 50745-H-D25 B - 2.5 Dia. 21.76 21.22 21.15745-H-P20 B PLCC-20 11.9 x 11.9 108.55 103.38 100.44745-H-S16 B SOIC 14, 16 6.8 x 10.2 87.33 85.42 79.30745-H-SL16 B SOL 14, 16 10.6 x 10.8 85.70 81.62 79.30745-H-BQ38 B BQFP-196 37.7 x 37.7 108.55 103.38 100.44745-H-SL28 B SOL 28 10.6 x 18.4 85.70 81.62 79.30745-H-TS48 B TSOP 48 21.0 x 13.3 85.70 81.62 79.30
HCT-900 SYSTEM CONVECTION REWORK SYSTEMS
The HCT-900 Hand Held Convection Tool offers a low cost, versatile rework solution for a wide variety of production and rework application challenges. It has a compact, robust design comprising of analog controls for both airflow and heat. A closed loop feedback circuit controls the temperature allowing the desired temperature to be achieved and maintained regardless of changes in the volume of airflow.
The HCT-900 can be used for the removal and replacement of electronic components, including lead-free, from 0201 up to 304-Pin QFP. It is also effective at reworking pin-hole devices such as sockets and connectors. And, using it with solder braid and flux is a fast and efficient way to remove solder shorts and splashes. It can also be used in plastic applications such as applying shrink wrap to components or the formation of plastic rivets.
HCT Hand Held Convection Tool
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. DescriptionPrice Each
Mfr. Mfr. Part No. 1 5 10745-HCT-900-11 A 100/120VAC, AC Input 115VAC 690.25 656.14 622.91
A B C D E
F G H I J
K L M N O
MX-5000 SERIES REWORK AND SOLDER SYSTEMS
The MX-5000 Soldering, Desoldering and Rework Systems is the next generation of the trusted Metal Soldering Systems that enable increased productivity and process control for a wide range of applications. Building on the renowned strength of its popular MX-500 predecessor, the MX-5000 Series increased output power, adds process feedback, and improves application flexibility with new hand-pieces.
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Price
EachMfr. Mfr. Part No.745-MX-5050 C MX-DS010 Hand-Piece Workstand and ACC 877.35745-MX-H1-AV D ADV Hand Piece STTC SMTC Cartridges 116.23745-MX-PTZ E Precision Tweezers HP PTTC Cartridges 309.95745-MX-DS1 - Desoldering HP STDC Cartridges 325.58745-MX-TALON - Talon Hand Piece TATC Cartridges 299.21745-MX-RM3E - Soldering HP STTC Cartridges 103.10745-MX-W1AV F Workstand For Metcal ADV And Ultrafine HP 86.82745-MX-W5DS - Workstand For Metcal MX-DS1 86.82745-MX-UK1 G Upgrade Kit ADV HP Tipsaver Workstand 204.89745-MX-UK4 H UPG Kit Precision TW HP Tipsaver WK SD 390.70
PS-900 SOLDERING SYSTEMSPS-900 Solar Soldering SystemOK International has launched a new soldering system for PV tabbing and bussing applications proven to reduce micro cracking. The PS‐900 with specially designed hoof tip geometry optimizes the power delivered to the solder joint while it’s temperature‐sensitive heater ensures low temperature soldering thus minimizing thermally induced stresses on cell surfaces.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
EachMfr. Mfr. Part No.745-PS-900-SOLAR N PS-900-SOLAR Soldering System 260.13
PS-900 Soldering System
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
EachMfr. Mfr. Part No.745-PS-900 O PS-900 Soldering System 260.13
The PS-900 increases productivity by performing a wide range of applications. It is suited for lead-free soldering processes, multilayer boards and thermally demanding components. What's more, SmartHeat technology enables the PS-900 to solder at lower temperatures, even for such demanding applications as lead-free soldering processes. This means operators are more productive and materials are safe from damaging temperatures.
System Includes PS-PW900 Power Supply With Power Cord, PS-HC3 Hand-Piece With Coil Assembly, WS2-NS Workstand With Sponge And AC-CP2 Tip Removal Pad.
For quantities greater than listed, call for quote.MOUSER STOCK NO.
DescriptionPrice Each
Mfr. Mfr. Part No. 1 5 10745-NZKT-1 Nozzle Kit for Chip Resistors, SOIC and
TSOP Packages307.05 291.69 288.96
745-NZKT-2 Kit for PLCC, QFP and BQFP packages 400.26 383.82 374.50
HCT Nozzle Kits
mouser.com/metcal (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
MX-5200 DUAL SIMULTANEOUS SOLDERING, DESOLDERING AND REWORK SERIES
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
EachMfr. Mfr. Part No.745-MX-5210 C Dual-Simultaneous Solder Rework Station 699.00745-MX-5211 I Dual-Simultaneous Solder Rework Station 884.00745-MX-5220 C Dual-Simultaneous Ultra Fine Soldering 724.00745-MX-5241 J Dual-Simultaneous Tweezer Solder System 1059.00745-MX-5250 K Dual-Simultaneous Desoldering Station 914.00745-MX-5251 L Dual-Simultaneous Solder, Desoldering 1099.00745-MX-PS5200 M Dual-Simultaneous 100-240VAC Power Supply 514.00
The MX-5200 Soldering, Desoldering and Rework Series offers the same increased productivity and process control as the MX-5000 Series, now with dual-simultaneous ports. The MX-5200 can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed.
Soldering ToolsW
eller
2333
WELLER® Soldering StationsA B C D E F
G H I J K
DIGITAL SOLDERING STATIONSWD1001, Digital Soldering Station with WMP Soldering PencilFeatures:• Heating element is in the tip • Tip temperature is adjustable• Super fast heat up
• Superior thermal recovery • Non burnable silicone cord• ESD safe
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
EachMfr. Mfr. Part No.578-WD1001 I 85W Digital Station 354.70Soldering Pencil578-WMP - 65W Soldering Pencil 131.10NT Series Tips for WMP Pencil578-NTA - .063 x .331 Chisel Tip 10.80578-NTB - .094 x .289 Chisel Tip 10.80578-NTC - .126 x .305 Chisel Tip 10.80578-NTD - .157 x .305 Chisel Tip 21.20578-NTH - .031 x .331 Chisel Tip 11.30578-NTK - .047 x .331 Chisel Tip 11.30578-NT1 - .010 x .291 Micro Chisel Tip 10.80578-NT4 - .047 x .391 Round Tip 10.80578-NT6 - .063 x .372 Chisel Tip 10.80578-NTAX - .063 x .339 Bent Chisel Tip 15.30578-NTGW - .079 x .528 Cylindrical Tip 18.20578-NT1S - .0.10 x .333 Micro Tip 10.80578-NT1X - .016 x .321 Bent Round Tip 12.60
WD1002 Station Includes WP80 Pencil
Specifications:• 85 Watt • 120V (input)/24V (output)• Temperature Range: 150°F to 850°F
Features:• UL Listed, ESD Safe• Uses economical LT series tips
Quick heat up, fast recovery, and more reliable than ever. A new generation of digital electronically controlled soldering stations for fast efficient soldering.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
EachMfr. Mfr. Part No.578-WD1002 J 85W Digital Station 354.70Soldering Pencil578-WP80 - Soldering Pencil 131.09LT Series Tips for WP80 Iron578-LT-I - .25mm round 4.60578-LT-IS - .2mm round 4.60578-LT-AS - 1.6mm round 4.60578-LT-B - 2.4mm chisel 4.60578-LT-C - 3.2mm chisel 4.60578-LT-H - .8mm chisel 4.60578-LT-CS - 3.2mm round 4.60578-LT-D - 4.6mm chisel 4.80578-LT-K - 1.2mm chisel 4.50578-LT-A - 1.6mm chisel 4.60
WX2 SOLDERING STATIONSSpecifications:• Dimensions: (in.) 6.69 L x 5.94 W x 5.12 H• Power Watt: 240W
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Price
EachMfr. Mfr. Part No.578-WX2 F 120V, 240W High Powered Dual Port Digital Power Unit 424.20578-WX2020 G 120V, 200W High Powered Digital Soldering Station (2)
WXP120 Pencils815.60
578-WX2021 H 120V, 200W High Powered Digital Soldering Station WXMP and WXMT
929.00
Tweezers, Safety Rest, Soldering Pencil and Chisel Tips 578-T0051317799 - WXMT Micro-Desoldering Tweezers No Tip Cartridge 221.20578-T0051317899 - WXMT Micro-Desoldering Tweezers RTW2 Tip Set,
WDH 60 Stand269.69
578-T0051516999 - WDH60 Safety Rest for WXMT 110.09578-T0052920199 - WXP120 Solder Pencil, 120W,24V for WX1 and WX2 207.00578-T0052920299 - WXP120 Solder Pencil w/WDH10T Stand, 120W,24V for
WX1 and WX2 279.80
578-T0052920399 - WXMP Iron Micro-Soldering 186.20578-T0052920499 - WXMP With WDH 50 209.09578-T0052920699 - WXP 200 with WDH 31 290.20578-T0054480199 - XHT D Chisel 5x1.2 Tip 12.80578-T0054480299 - XHT E Chisel 7.6x1.5 Tip 12.80578-T0054480499 - XHT C Chisel 3.2x1.2 Tip 12.80
WX1 SOLDERING STATIONSSpecifications:• Main Voltage: 120V, 50Hz • Dimensions: (in.) 6.69 L x 5.94 W x 5.12 H• Temperature Range: 150°F to 999°F
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Price
EachMfr. Mfr. Part No.578-WX1 A 120V 120W Control Unit W/WX120 Soldering Pencil
with XTB Tip393.50
578-WX1010 B 120V WXP120 WDH10 Soldering Station 597.90578-WX1011 C 120V, WXMP, WDH50 Soldering Station 546.80578-WX1012 D 120V, WXP65, WDH10 Soldering Station 515.10578-WSM1 E WSM 1C Soldering Station Digital 392.50Soldering Iron and Tips578-T0052921199 - Soldering Iron WXP65 196.60578-T0052921299 - Soldering Iron WXP65/WDH10 269.39578-T0054485099 - Soldering Tip XNT, 1,0.25mm 7.69578-T0054485199 - Soldering Tip XNT, A,1.6mm 7.69578-T0054485299 - Soldering Tip XNT, 1S,0.20mm 7.69578-T0054485399 - Soldering Tip XNT ,D 4.0mm 15.80578-T0054485499 - Soldering Tip XNT GW 13.80578-T0054485599 - Soldering Tip XNT 4, 1.2mm 7.69578-T0054485699 - Soldering Tip XNT 6, 1.6mm 7.69578-T0054485799 - Soldering Tip XNT B, 2.4mm 7.69578-T0054485899 - Soldering Tip, XNT C, 3.2 mm 7.69578-T0054485999 - Soldering Tip XNT H, 0.8mm 8.50578-T0054486099 - Soldering Tip XNT K, 1.2mm 8.50578-T0054486299 - Soldering Tip XNT 1SC, 0.4x0, 15mm 14.90578-T0054486399 - Soldering Tip XNT KN, 2.0mm 14.90Accessory578-T0058765711 - Barrel for WXP120 27.09
mouser.com/weller (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
LED SOLDERING IRONSFeatures:• Three LED lights for limited application shadowing • Round Co-molded soft grip handle design for easy tip positioning• Triangular handle area for maximum tip control
• Stainless steel • US Cord Included• Use only Weller® tips
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
EachMfr. Mfr. Part No.578-SP15NUS K 15W Soldering Iron with LEDs, Light Duty 15.20578-SP25NUS K 25W Soldering Iron with LEDs, Standard Duty 17.20578-SP25NKUS K 25W Soldering Iron with LEDs Kit, Standard Duty 20.20578-SP40NUS K 40W Soldering Iron with LEDs, Medium Duty 20.20578-SP40NKUS K 40W Soldering Iron with LEDs Kit, Medium Duty 24.30578-SP80NUS K 80W Soldering Iron with LEDs, Heavy Duty 28.30
Sold
erin
g To
ols
Wel
ler
2334
WELLER® Digital Soldering Stations
WESD51 DIGITAL SOLDERING STATION Features:• Quick heat up and recovery • Temperature lockout • UL listed • Microprocessor controlled with digital LED display • ESD safe
Specifications:• Temperature Range: 300°F-850°F• Temperature Stability: +/- 10°F• Voltage 120V(input) 24V(output)
A
B
Features:• On/off switch with "power-on" indicator light • Variable power control produces 5-40W • Quality lightweight pencil iron • Natural sponge tip cleaning pad • ST3 iron plated copper tip • UL listed
WLC100 SOLDERING STATION AND TIPS
Features:• Special "closed loop" method of controlling maximum tip temperature• PT series soldering tips come in a variety of shapes and sizes in three temperature ranges
WTCPT SOLDERING STATION AND TIPS
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Price
Each Mfr. Mfr. Part No.578-WLC100 On/off switch, variable power control, lightweight
pencil iron, and ST3 iron plated copper tip51.60
578-SPG40 Replacement soldering iron 19.50578-HE40 Replacement heater element (40W) 16.20
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Size
(in.)Reach
(in.)PriceEach Mfr. Mfr. Part No.
578-ST-1 A Screwdriver tip .06 .75 3.69578-ST-2 B Screwdriver tip .09 .75 3.69578-ST-3 C Screwdriver tip .12 .75 4.69578-ST-4 D Screwdriver tip .18 .75 4.69578-ST-5 E Single flat tip .03 .75 3.69578-ST-6 F Screwdriver tip .03 .75 3.80578-ST-7 G Conical tip .03 .75 3.69578-ST-8 H Narrow SD tip .06 .75 3.80
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Price
Each Mfr. Mfr. Part No.578-WESD51 A 50W Digital Station 186.10578-PES51 B Soldering Iron 45.70
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Price
Each Mfr. Mfr. Part No.578-WTCPT WTCPT station/TC201T (42W) iron/PTA7 tip/stand 179.90
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Size
(in.)Reach
(in.)TempRating
Price Each Mfr. Mfr. Part No.
578-PTA6 A Screwdriver tip .06 .62 600°F 3.60578-PTA7 A Screwdriver tip .06 .62 700°F 3.60578-PTA8 A Screwdriver tip .06 .62 800°F 3.60578-PTD7 B Screwdriver tip .18 .75 700°F 3.60578-PTD8 B Screwdriver tip .18 .75 800°F 3.60578-PTH7 C Screwdriver tip .03 .62 700°F 3.60578-PTK7 D Screwdriver tip .04 1.00 700°F 3.69578-PTO7 E Long conical tip .03 1.00 700°F 3.60578-PTO8 E Long conical tip .03 1.00 800°F 3.60578-PTP7 F Conical tip .03 .62 700°F 3.60578-PTP8 F Conical tip .03 .62 800°F 3.20578-PTR7 G Narrow screwdriver .06 .62 700°F 3.60578-PTR8 G Narrow screwdriver .06 .62 800°F 3.60578-PTS7 E Long conical tip .01 1.00 700°F 3.60578-PTS-8 E Long conical tip .01 1.00 800°F 3.60
WLC100 Soldering Station
ST Series Tips for WLC100 Iron
PT Series Tips for TC201T (42W) Iron
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Price
Each Mfr. Mfr. Part No.578-TC201T Soldering iron used with WTCPT station 94.70578-SW60 Switch assembly for TC201T iron used with WTCPT station 33.60578-EC234 Heater assembly for EC1201A Iron used with WTCPT station 20.50578-BA60 Barrel Nut assembly for TC201T Iron used with WTCPT station 7.50
Replacement Parts (not illustrated)
WTCPT Station with 42W Iron
WES51 SOLDERING STATION
Features:• Quick heat up and recovery• Temperature lockout• 50W of power
Specifications:• Temperature Range: 350°F-850°F• Temperature Stability: ± 10°F
• ESD Safe• UL listed
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Description Price
Each Mfr. Mfr. Part No.578-WES51 A 50W Analog Station 129.80578-PES51 B Soldering Pencil 45.70
ET Series Tips for PES51 PencilFor quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Description Size(in.)
Reach(in.)
Price EachMfr. Mfr. Part No.
578-ETA C Screwdriver Tip .06 .62 3.60578-ETB C Screwdriver Tip .09 .62 4.00578-ETC C Screwdriver Tip .12 .62 4.00578-ETD C Screwdriver Tip .18 .75 4.00578-ETH C Screwdriver Tip .03 .62 4.00578-ETK D Long Screwdriver Tip .041 1.00 4.00578-ETR D Narrow Screwdriver Tip .06 .62 4.00578-ETO E Long Conical Tip .03 1.00 3.60578-ETS E Long Conical Tip .01 1.00 4.00578-ETP F Conical Tip .03 .62 4.00
A B C D E F
A B C D
E F G H
A B C D
E F G
mouser.com/weller (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
578-WAD101
C
B
A
B B
A A
A
Soldering ToolsW
eller
2335
DIGITAL SHOP AIR DESOLDERING STATION80 watts of power for faster heat up and better performance even on heavy ground planes and multi-layer boards. Higher power means less time spent on the PCB and less potential for damaging components.
Features:• Vacuum delay feature• Uses fast response shop air• ESD Safe• Programmable with WCB1Applications:Rework and repair through hole boards. Lead-free solder applications.
SELF-CONTAINED SOLDER/DESOLDERING STATIONS
400 watts of total power over three independently controlled channels, plus air and vacuum ports allows you to use up to three tools simultaneously.
Features:• Vacuum delay feature• Built in pump• ESD Safe
HOT AIR STATIONS
Features digital temperature control with easy to read LED display for fast and accurate temperature set of the hot air.
Features:•Airflowisadjustable• Compact design• Programmable with WCB1
Applications:Rework and repair of SMT boards.Sensitive applications requiringnon-contact hot air. Some groundplanes and multi-layer boards.
WELLER® Desoldering Stations and Rework Stations
Uses DX Series desoldering tiplets*
WRS3000X REWORK SYSTEMFeatures:• 400W total power over 3 independently controlled channels• Rework & repair of thru hole & SMT boards • Digital display• ESD safe• Built-in pump provides air for the hot air tool and vacuum for the desoldering tool
B
C
D
A
E
• Valuable repair tool for servicing printed circuit boards and solid state electronics• Allows components to be removed and replaced quickly with less chance of heat damage• Complete unit includes 50W tool, vacuum bulb,desoldering assembly with DST4 tiplet
DS40 DESOLDERING/REPAIR TOOL
WHA900 HOT AIR REWORK STATIONEconomical,yetcapableenoughtohandlemostbenchtopreworkjobs,this650-wattself-containedhotairstationhasacompactdesignwhichmaximizesworkspaceefficiency.
Features:• Controlled output maintains set temp regardlessofairflow setting.• Temperature Range: 122°F-1022°F
Applications:Weller nozzle technology safely removes QFPs, PGAs, and SMT bases.
A
B C D
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Includes: Price
EachMfr. Mfr. Part No. 578-WDD81X Power unit, DXV80 in-line desoldering pencil, & AKV80 stand 744.10
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Price
EachMfr. Mfr. Part No. 578-WR3000M WR3000M power unit, 80W 24V Soldering Iron,
HAP200 Hot Air Pencil, DXV80 Desoldering Pencil Set 80W2363.90
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Description Price
EachMfr. Mfr. Part No. 578-WHP80 A Preheating Plate (80W/24V) 466.20578-WR3M B Rework System Control Unit 1610.70578-WP80 C Soldering Pencil (80W) 131.09578-DXV80 D Desoldering Pencil 226.30578-WMRP E Chrome Plated Aluminum Pencil 142.50
For quantities greater than listed, call for quote.
MOUSER STOCK NO. Dimensions: mm Price EachMfr. Mfr. Part No. A B C
578-DX110 1.90 .70 23.00 13.80578-DX111 2.50 .70 23.00 13.80578-DX112 2.30 1.00 23.00 13.80578-DX113 2.50 1.20 23.00 14.49578-DX114 3.30 1.80 23.00 13.79578-DX115 1.90 .70 23.00 13.80578-DX116 2.70 1.20 29.00 13.80578-DX117 2.90 1.50 23.00 13.80578-DX118 1.50 .70 23.00 13.80578-DX119 1.10 .70 31.00 13.80578-DX120 2.50 1.10 22.00 13.80
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Price
EachMfr. Mfr. Part No.578-WAD101 ShopAirHAP1hotairpencil,PH60stand,and sponge 675.30
MOUSER STOCK NO.Fig.
Dimensions: mm PriceEachMfr. Mfr. Part No. A B
578-WHA900 A - - 702.20Round Nozzle578-0058736870 B 7.00 - 72.204-Sides Heated Nozzle578-0058736839 C 11.00 11.00 108.30578-0058736814 C 18.00 18.00 73.20578-0058736804 C 26.00 26.00 75.09578-0058736833 C 32.00 32.00 131.092-Sides Heated Nozzle578-0058736842 D 10.00 14.00 102.60578-0058736843 D 10.70 10.70 86.50
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Price
EachMfr. Mfr. Part No. 578-DS40 Desoldering/repair tool 105.50
DX Series Tips for DXV80 Iron
Applications:Rework and repair of mixed technology boards.
mouser.com/weller (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
Quick change knurled collar makeschanging heater simple
Small, lightweighthandle now withcushioned grip
Screwdrivertip
578-PH25 578-PH60
Deluxe
Straight Nose578-42HV
Curved Nose578-43HV
Sold
erin
g To
ols
Wel
ler
2336
WELLER® Soldering Irons, Tools, and Accessories
ST Series Tips For WP25P and WP35P Irons
WP25 AND WP35 SOLDERING IRONS AND TIPS
MARKSMAN® SOLDERING TIPS
A
B
C
SOLDERING TOOLS
A
D E
H
F
I
G
B C
SOLDERING TOOL STANDS578-8000 Features:• Attaches easily to work bench• Protects operator from burns• Prevents iron breakage
578-9800 Features:• Iron holder with stay cool ceramic mouthpiece, cast metal tray
A B
REPLACEMENT SPONGE
For all soldering stations and 578-PH60 stand
Seizers are 6", have 3-position snap lock, serrated jaws, & box-joint construction. Precision machined from perfectly tempered stainless steel.
Sponge and tray
SEIZER CLAMPSSOLDERING AIDSKleen-Tip
A specially processed sponge for cleaning tips of oxidation and prevents contamination.
For quantities greater than listed, call for quote.
MOUSER STOCK NO.
WellerPart No. Description Price
EachWP25 and WP35 Soldering Irons578-WP25 WP25 25W iron w/ST-3 tip 40.10578-WP35 WP35 35W iron w/ST-3 tip 55.20Soldering Tool Stands578-PH60 PH60 For WP35 iron 27.50Replacement Heaters Includes knurled collar only578-HE25 HE25 25W for WP25 iron 23.80578-HE35 HE35 35W for WP35 iron 29.40578-KN60 KN60 Knurled tip nut 3.60
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Description Size(in.)
Reach(in.)
Price Each
578-ST-1 ST-1 A Screwdriver tip .06 .75 3.69578-ST-2 ST-2 B Screwdriver tip .09 .75 3.69578-ST-3 ST-3 C Screwdriver tip .12 .75 4.69578-ST-4 ST-4 D Screwdriver tip .18 .75 4.69578-ST-5 ST-5 E Single flat tip .03 .75 3.69578-ST-6 ST-6 F Screwdriver tip .03 .75 3.80578-ST-7 ST-7 G Conical tip .03 .75 3.69578-ST-8 ST-8 H Narrow SD tip .06 .75 3.80
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No.PriceEach
578-EC205 EC205 2.70
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No.PriceEach
578-400 400 13.20Replacement Sponge578-455 455 3.50
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Xcelite
Part No.Price Each
578-42HV 42HV 8.60578-43HV 43HV 8.70
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Price Each
578-8000 8000 A 25.80578-9800 9800 B 29.20
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Description Price Each
578-7760 7760 A Red; 6', 2-wire cord with cool, soft 17.00578-7770 7770 A Blue; touch acid and flux resistant grips 16.10
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Description Price Each
578-100 100UG B Adapts to 1/8" thread-in tiplets and nibs 6.90
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Rated Description Price Each(W) (V)
578-4033-S 4033-S C 45 120 Tellurium copper, iron clad, silver plated 33.60
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Rated TipTemp. Description Price
Each(W) (V)578-535-S 535-S D 23 120 700 Heaters for 1/8" thread-in tips 25.80578-1235-S 1235-S D 33 120 800 Heaters for 1/8" thread-in tips 25.80578-4035-S 4035-S D 45 120 900 Heaters for 1/8" thread-in tips 29.20
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Rated TipTemp. Description Price
Each(W) (V)578-537-S 537-S E 23 120 700 Heaters for 1/4" thread-on tips 23.00578-1237-S 1237-S E 33 120 800 Heaters for 1/4" thread-on tips 23.39578-4037-S 4037-S E 45 120 900 Heaters for 1/4" thread-on tips 24.80
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Description Price Each
578-PL-111 PL-111 F Pencil; 3/4" long, 1/8" dia. 5.70578-PL-113 PL-113 G Chisel; 3/4" long, 1/8" dia. 5.80578-PL-151 PL-151 H Screwdriver; 3/4" long, 1/8" dia. 6.30
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Description Price Each
578-PL-331 PL-331 I Pencil 1" (L) x 1/8" (D) 5.20
For quantities greater than listed, call for quote.MOUSER
STOCK NO.Weller
Part No. Fig. Description Price (2 Per Pkg)
578-MT-1 MT-1 A SP23 .125" cone tip 4.90578-MT-2 MT-2 B SP23 .125" screwdriver tip 4.90578-MT-10 MT-10 C SP40 .25" chisel tip 8.80578-MTG20 MTG-20 C SP80 .375" chisel tip (1) 8.30
MT Series Tips For Marksman® Irons
For use with the 1/8" standard line thread-in heating elements and fits 1/4" by using adapter no. 578-100 (Fig. B)
1/8" Thread-In Tips
For use on thread-on heating elements with standard line handles and soldering system UTC-100 (copper alloy, iron clad, silver plated)
1/4" Thread-On Tips
Interchangeable 1/4" thread-on heating elements for standard line handles
Interchangeable 1/8" thread-in heating elements for standard line handles
Heating Elements and Tips for Standard Line Handles• Chisel tip, long taper • Tip Temp.: 100
Adapter (Fits 1/4" Thread-On Heating Elements)
Provides choice of handles and a selection of interchangeable heating elements and tips for combinations to match particular soldering requirements.
Standard Line Handles
A B C D
E F G H
mouser.com/weller (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
Solder ProductsA
IM
2337
AIM Solder ProductsWIRE SOLDER
Rosin Activated Wire SolderFeatures: • Fully Activated Flux• Excellent Wetting Properties• Glycol Free• Excellent Thermal Transfer• Leaves slight to moderate post-process residues that may be left on non-critical applications
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price Each
Mfr. Mfr. Part No. 1 10 25738-13286 60/40 0.020 1.0 29.82 25.57 22.23738-13287 60/40 0.025 1.0 19.20 18.67 17.80738-13288 60/40 0.032 1.0 17.06 16.67 16.30738-13290 60/40 0.050 1.0 16.41 16.10 15.68738-13291 60/40 0.062 1.0 16.03 15.59 14.75738-14080 60/40 0.093 1.0 17.97 16.82 15.94
Lead-Free Rosin Activated Wire Solder 2%
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price Each
Mfr. Mfr. Part No. 1 10 25738-14315 SAC305 0.032 1.0 52.96 51.79 49.65
This part is 2% flux, all others are 3%*
Rosin Mildly Activated Wire Solder
Features: • Mildly Activated Flux• Good Wetting Properties• Glycol Free• Good Thermal Transfer• Meets mil-spec cleanliness requirements without cleaning
RMA Wire is a mildly activated, general purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints.
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25
738-13772 62/36/2 0.025 1.0 36.11 33.54 31.95738-14320 63/36/2 0.050 1.0 34.88 32.44 30.98738-13560 63/37 0.020 1.0 30.50 26.16 22.74738-13427 63/37 0.015 1.0 17.66 16.05 15.17738-13562 63/37 0.025 1.0 23.37 22.73 21.73738-13563 63/37 0.032 1.0 17.53 16.87 16.52
* 738-13541 63/37 0.032 1.0 17.53 16.88 16.52
BAR SOLDER
Electropure Bar Solder
AIM’s Electropure Bar Solder is processed from virgin or better metals in a proprietary method that removes impurities and oxides. The result is a lower dosing rate, as well as a decrease in defects while using no-clean, RMA or water soluble flux chemistries
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Weight
(lbs.)Price Each
Mfr. Mfr. Part No. 1 10 25738-5040 SN63/PB37 Bar 1.0 21.98 20.42 19.45
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description Weight
(lbs.)Price Each
Mfr. Mfr. Part No. 1 10 25738-5225 SAC305 LF Bar 2.5 109.30 101.43 95.02738-5202 SN100C LF Bar 2.5 62.62 60.45 57.41
No-Clean Wire SolderFeatures: • Tin-Lead and Lead-Free Compatible • Low Post-Process Residues• Good Wetting• Drop-In For No-Clean Applications• Cleanable With Saponifier• IPC Compliant
GLOW CORE is a no-clean, resin based flux cored wire solder designed to offer excellent wetting characteristics and lead-free compatibility. This product is very active and is recommended for fast cycle time soldering. GLOW CORE flux promotes good thermal transfer, offering better solder penetration into plated through holes and surface mount interconnections. GLOW CORE cored wire produces low-to-medium post-processes residues that are electrically safe and do not require cleaning for most applications.
***
GLOWCORE 2%GLOWCORE 2.5%
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25
738-13368 63/37 0.015 0.5 18.47 18.01 17.57738-13283 63/37 0.020 1.0 30.50 26.15 22.74738-13308 63/37 0.025 1.0 23.38 22.73 21.73
* 738-13426 63/37 0.032 1.0 17.53 16.88 16.52** 738-13977 63/37 0.032 1.0 17.53 16.87 16.52
738-15033 63/37 0.040 1.0 20.95 20.35 19.84738-13211 63/37 0.050 1.0 20.26 19.18 17.13738-13223 63/37 0.062 1.0 19.71 19.26 17.53
Lead Free No-Clean Wire Solder
GLOW CORE is a lead-free and tin-lead compatible no-clean flux core that offers very good wetting and low residues.
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price Each
Mfr. Mfr. Part No. 1 10 25738-14054 SAC305 0.020 1.0 43.94 40.47 38.83738-14048 SAC305 0.032 1.0 52.96 51.79 49.65738-14111 SAC305 0.050 1.0 37.53 36.48 35.58738-14050 SAC305 0.062 1.0 46.71 42.38 38.90
Water Soluble Wire Solder
Features: • Highly activated water soluble flux cored wire• High Activity Level and Very Good Wetting• Good thermal transfer reduces oxidation of solder iron tip
• Post-process residues easily cleaned in hot water
Water soluble cored wire features a halide-activated system that has been neutralized with an amine. The amine hydrohalide provides a high activation level that produces excellent tarnish or oxide removal, and maximum capillary action, leading to faster wetting, and reducing the chances of thermal degradation of the boards materials. Any flux residue from this solder is readily soluble in hot water.
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25738-13236 63/37 0.015 1.0 17.66 16.05 15.17738-13154 60/40 0.032 1.0 17.06 16.67 16.30
Lead-Free Bar Solder
Lead Free Water Soluble Wire Solder
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Diameter
(in.)Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25738-13951 SAC305 0.020 1.0 43.94 40.47 38.83738-13949 SAC305 0.032 1.0 63.81 55.72 48.74738-13963 SAC305 0.062 1.0 46.70 42.39 38.89
WS482 is a water soluble, halide-free flux cored wire designed for lead-free applications. Post-process residues are non-corrosive.
mouser.com/aim (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
Sold
er P
rodu
cts
Kes
ter
2338
KESTER Solder Products
Developed to reduce bottom side micro-solder balling and survive SMT dual wave soldering systems. May be applied by spray or wave. Size: 1 gallon
LIQUID FLUX
For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Price Each
Mfr. Mfr. Part No. 1 6 12 24533-63-0000-0977 977 VOC-Free No-Clean 43.47 41.11 39.12 36.05
FLUX-PEN ®For rework and touch-up soldering. The chisel point allows work in confined spaces. Spring valve prevents the flux inside of the pen from “drying out”.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Price Each
Mfr. Mfr. Part No. 1 5533-0186 #186 RMA flux 4.78 4.64533-952D6 952-S Low solids, no clean flux pen 6.72 6.38533-2331 2331-ZX Water soluble flux 4.78 4.64
BAR SOLDER
For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Price EachMfr. Mfr. Part No. 1 10 25533-04-6337-0050 SN63PB37 Ultrapure, 1 2/3 lbs. 44.54 41.47 37.00
ACTIVATED ROSINS FLUXKester Activated Rosin Flux has been developed forfluxing applications where non-activated and mildly activated rosin fluxes are too inactive to remove metal oxides, where proper and complete residue removal of potentially corrosive water-soluble organic acid flux is not possible, and where soldering of electronic assemblies requires instant wetting and excellent capillary flow.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Dia.
(in.)Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25533-24-7068-1401 Sn96.5/3.0Ag/0.5 Cu 0.020 1 123.97 109.06 100.67533-24-7068-1406 Sn96.5/3.0Ag/0.5 Cu 0.025 1 112.01 102.68 94.78533-24-7068-1402 Sn96.5/3.0Ag/0.5 Cu 0.031 1 97.01 87.18 76.08533-24-7068-1404 Sn96.5/3.0Ag/0.5 Cu 0.050 1 112.61 103.22 95.28
LEAD-FREE SOLDER
For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Dia.
(in.)Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25No Clean533-24-7068-7600 Sn96.5/3.0Ag/0.5Cu 0.031 1 106.71 87.67 75.15Water Soluble533-24-7068-6401 Sn96.5/3.0Ag/0.5Cu 0.020 1 118.97 109.06 100.67533-24-7068-6403 Sn96.5/3.0Ag/0.5Cu 0.031 1 111.75 102.44 94.56
ULTRAPURE® K100 LEAD FREE BAR SOLDER Designed specifically as a low-cost alternative to traditional lead-free alloys, This is a near-eutectic tin/copper alloy with controlled metallic dopants to manage the grain structure within the solder joint. The improved grain structure also results in completely filled and shinier solder joints than traditional lead-free alloy alternatives.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Description Weight
(lbs.)Price Each
Mfr. Mfr. Part No. 1 10 25533-04-7068-0000 Sn96.6/3.0Ag/0.5Cu Lead Free Bar 1.66 126.13 96.17 92.00
“245” No-Clean Core Solder
For quantities greater than listed, call for quote.MOUSER STOCK NO. Alloy Core
SizeFlux by Weight
Dia. (in.)
Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25533-24-6337-8806 63/37 50 1.10% 0.015 1 55.46 51.39 47.93533-24-6337-8807 63/37 50 1.10% 0.02 1 85.21 76.19 67.16533-24-6337-8834 63/37 58 2.20% 0.02 1 50.28 47.03 44.91533-24-6337-8809 63/37 50 1.10% 0.025 1 40.92 38.21 35.35533-24-6337-8800 63/37 50 1.10% 0.031 1 59.09 53.09 47.27533-24-6337-8801 63/37 58 2.20% 0.031 1 50.01 41.10 35.23533-24-6337-8802 63/37 66 3.30% 0.031 1 36.70 34.02 31.35533-24-6337-8813 63/37 50 1.10% 0.04 1 41.68 38.19 34.52533-24-6337-8814 63/37 50 1.10% 0.05 1 38.53 35.61 33.21533-24-6337-8817 63/37 50 1.10% 0.062 1 45.47 37.36 32.01
A mild, low residue core solder for electronic assembly. The residues from “245” are designed to be left on with no post soldering cleaning.
“285” Rosin, Mildly Activated Rosin Core Solder
For quantities greater than listed, call for quote.MOUSER STOCK NO. Alloy Core
SizeFlux by Weight
Dia. (in.)
Weight (lbs.)
Price EachMfr. Mfr. Part No. 1 10 25533-24-6337-9703 63/37 66 3.30% 0.015 1 56.23 51.97 48.38533-24-6337-9702 63/37 66 3.30% 0.02 1 52.24 45.67 39.34533-24-6337-9718 63/37 66 3.30% 0.025 1 48.89 43.68 37.86533-24-6337-9713 63/37 58 2.20% 0.031 1 37.95 32.18 28.73533-24-6337-9710 63/37 66 3.30% 0.031 1 36.23 34.13 32.91
Conforms to type RMA of FED SPEC QQ-SS-571 and is on the qualified products list. High mobility and fast spreading action is comparable to RA fluxes. It is less corrosive and conductive than “44” rosin and is commonly used without subsequent flux removal.
“331” Water Soluble Core Solder
For quantities greater than listed, call for quote.MOUSER STOCK NO. Alloy Dia. (in.) Weight
(lbs.)Price Each
Mfr. Mfr. Part No. 1 10 25533-24-6337-6422 63/37 0.015 1 58.33 53.88 50.05533-24-6337-6401 63/37 0.02 1 52.65 46.33 43.88533-24-6337-6417 63/37 0.025 1 40.04 37.07 34.57533-24-6337-6403 63/37 0.031 1 46.37 38.10 32.66533-24-6337-6411 63/37 0.062 1 34.36 31.90 30.13533-24-6040-6403 60/40 0.031 1 41.27 34.59 29.86533-24-6040-6411 60/40 0.062 1 56.85 46.73 40.05
It is more effective and heat stable than rosin fluxes in soldering difficult metals. Soldering with “331” should always be followed with a water wash to remove the residues which are conductive and can absorb moisture. Flux by weight: 3.3%
WATER SOLUBLE FLUX
For quantities greater than listed, call for quote.533-24-7068-6417 Sn96.5/3.0Ag/0.5 Cu 0.025 0.025 102.97 93.36 86.96
Kester water soluble fluxes are high activity, organic fluxes designed for automated soldering of circuit board assemblies where more aggressive fluxes are required, but reliability considerations are paramount. The residues after soldering are effectively removed in standard water cleaning systems. Although possessing high activity, boards exhibit high ionic cleanliness after water cleaning.
NO-CLEAN FLUXFor cored solder wire was developed to provide superior wetting performance for hand soldering.
For quantities greater than listed, call for quote.533-24-7068-7603 Sn96.5/3.0Ag/0.5 Cu 0.020 1 117.93 107.49 100.53533-24-7068-7617 Sn96.5/3.0Ag/0.5 Cu 0.025 1 116.61 106.88 98.66533-24-7068-7601 Sn96.5/3.0Ag/0.5 Cu 0.031 1 78.01 71.78 69.49533-24-7068-7606 Sn96.5/3.0Ag/0.5 Cu 0.050 1 106.88 96.91 90.27533-24-7068-7607 Sn96.5/3.0Ag/0.5 Cu 0.062 1 102.71 93.12 86.73
Standard Performance Characteristics: • Colorless translucent residues • Improves wetting performance • Excellent solderability and fast wetting to a variety of surface finishes
• Low smoke • Low odor • Low spattering
“44” Rosin, Activated Rosin Core Solder
WIRE SOLDERProduct Use: Soldering flux in cored solder for electrical or electronic applications.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Alloy Dia. (in.) Weight
(lbs.)Price Each
Mfr. Mfr. Part No. 1 10 25533-24-6337-07 63/37 0.015 1 54.36 50.82 42.44533-24-6337-0010 63/37 0.02 1 73.25 65.77 58.22533-24-6337-18 63/37 0.025 1 49.51 40.66 34.88533-24-6337-27 63/37 0.031 1 31.40 30.46 29.54533-24-6337-39 63/37 0.04 1 39.08 35.97 33.55533-24-6337-53 63/37 0.05 1 57.81 52.02 46.24533-24-6337-61 63/37 0.062 1 47.36 34.36 28.70533-24-6040-0010 60/40 0.02 1 46.85 43.11 41.34533-24-6040-18 60/40 0.025 1 38.50 36.50 33.76533-24-6040-27 60/40 0.031 1 40.50 37.43 35.85533-24-6040-39 60/40 0.04 1 38.76 34.94 32.56533-24-6040-53 60/40 0.05 1 34.82 32.14 29.96533-24-6040-61 60/40 0.062 1 37.96 34.86 32.26533-24-6040-66 60/40 0.093 1 36.14 33.92 31.54533-24-7150-18 62/36/2 0.025 1 88.62 72.81 62.41533-26-6040-0061 60/40 0.062 5 167.38 156.42 144.75
“44” Rosin is a general purpose industrial and electrical wire solder. The flux residue is non-conductive and non-corrosive. Flux by weight: 3.3%
mouser.com/kester (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Bench Top Supplies
Techspray
2339
TECHSPRAY Solder Products, Cleaners and DefluxersECO-LINE™ CLEANERS AND DEFLUXERS
Unique blend of hydrocarbons offers new, viable alternatives to CFC cleaning without depleting the ozone. Excellent cleaning ability, rapid evaporation, safe on plastic, ideal for lead-free applications, and is low cost.
AK225 CLEANERS AND DEFLUXERS
DESOLDERING FINE BRAID
Features:• Prevents ionic residue• Recommended for lead-free processes• Cleanest no-clean wick in the industry• Meets MIL Spec MIL-F-14256F
Blue Shower® G3™ Cleaner/DegreaserThis innovative, non-flammable blend is designed for precision cleaning of polar and non-polar soils including hand and solder oils, greases, silicones, fluxes, and other similar contaminants. Blue Shower® G3™ is effective in cleaning electronic equipment, machinery, metal parts, and other general cleaning applications.
• Non-ozone depleting • Non-flammable • Safe on most plastics • Rapidly evaporating • Patented formula • Ideal for Lead-Free processes
Flux Remover G3™Non-flammable defluxer designed specifically for removing R, RA, RMA, and SA type flux residues after high temperature reflow. This flux remover can also be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases, and other similar contaminants often found in electronics manufacturing.
Contact Cleaner G3™This non-flammable, precision blend is the optimal choice for removing oils, greases, silicones, dirt, and grime from all types of switches, relays, contact pads, and other electrical connections.
G3 is by far the best HCFC-141b replacement on the market. No other non-flammable precision cleaner can match G3s price/performance. G3 has 32% better cleaning ability than HCFC-141b, making G3 products the ideal choices for electronic cleaning.
G3 CLEANERS, DEFLUXERS, AND CONTACT CLEANERS
Designed specifically for removing R, RA, RMA, and SA type flux residues after high temperature reflow. Can be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases, and similar contaminants often found in electronics manufacturing.
No Clean Flux Remover G3™
No Clean Wick with Static Dissipative Bobbin Pro-Wick with Static Dissipative Bobbin
• 25F, 50F, 100F sizes available with 25', 50', 100', and 500' length spools available for most sizes -- call for quote• 100% pure copper with advanced braid design • Vacuum sealed to prevent oxidation
Features:• Fast wicking action• Meets MIL Spec MIL-F-14256F, NASA NHB5300.4, NPC200-4, SP5002
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price
EachMfr. Mfr. Part No.577-1630-16S 16 oz. Aerosol 29.56
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 5577-1632-16S 16 oz. Aerosol 28.07 26.71
For quantities greater than listed, call for quote.MOUSER STOCK NO.
SizePrice Each
Mfr. Mfr. Part No. 1 5577-1631-16S 16oz. aerosol 28.30 26.41577-1631-5S 5oz. with brush attach. 18.09 17.22
For quantities greater than listed, call for quote.MOUSER STOCK NO.
SizePrice Each
Mfr. Mfr. Part No. 1 5577-1634-12S 12oz. aerosol 25.70 24.47
Contains a hexane mixture. Ideal for switches, relays, contact pads, and other places of electrical connections.
Contact Cleaner
• Ozone depleting factor: 0 • Rapid evaporation
For quantities greater than listed, call for quote.MOUSER STOCK NO.
SizePrice Each
Mfr. Mfr. Part No. 1 5577-1622-10S 10 oz. aerosol 14.24 13.79577-1622-13S 13 oz. aerosol 15.98 15.23
Ecoline Flux Remover
• Ideal for sensitive plastics• Safe on electronics
• Rapid evaporation• Non-ozone depleting
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 12577-1621-10S 10 oz. aerosol 15.04 14.21
A blend of isopropanol and ethanol. Designed for cleaning electronic and electrical equipment, machinery, and metal parts.
Ecoline Blue Shower Maintenance Cleaner
• Ozone depleting factor: 0 • Rapid evaporation • Safe on most plastics
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 5577-1620-10S 10 oz. aerosol 14.76 14.28
Non-flammable, rapidly evaporating AK 225 blend designed for the removal of No-clean flux and white residue. Aggressively removes grease, oil, and soils from contacts, PCBs, connectors, and relays.
No-Clean Flux Remover
For quantities greater than listed, call for quote.MOUSER STOCK NO.
SizePrice Each
Mfr. Mfr. Part No. 1 5577-1660-6S 6 oz. aerosol, w/ brush
attach.25.04 23.83
Flux Remover AMS
Mixture of AK225 and methanol. Superior flux removal for type R, RMA, RA, and synthetic fluxes.
• Non-flammable• Rapid evaporation
• Ozone depleting factor: .03• Safe on most plastics
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 5577-1665-18S 18oz. aerosol 55.37 52.85
Blue Shower II, Degreaser/Defluxer
The standard for precision cleaning of polar and non-polar soils.
• Non-flammable• Ozone depleting factor: .03
• Rapid evaporation• Safe on most plastics
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 5577-1667-18S 18oz. aerosol 55.30 52.69
Contact Cleaner II
The choice solvent for precision cleaning and degreasing of electrical contacts.
• Non-flammable • Ozone depleting factor: .03• Rapid evaporation
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 5577-1668-18S 18 oz. aerosol 60.42 51.91
MOUSER STOCK NO. ColorCode
Width(in.)
Price EachMfr. Mfr. Part No. 1 105 Foot Spools577-1820-5F White 0.035 3.37 3.04577-1821-5F Yellow 0.055 3.59 3.02577-1822-5F Green 0.075 3.77 3.18577-1823-5F Blue 0.098 4.08 3.75577-1824-5F Brown 0.13 4.66 3.88577-1825-5F Red 0.193 5.39 4.7710 Foot Spools577-1820-10F White 0.035 6.63 5.40577-1821-10F Yellow 0.055 6.84 5.75577-1822-10F Green 0.075 6.69 5.57577-1823-10F Blue 0.098 7.29 6.00
MOUSER STOCK NO. ColorCode
Width(in.)
Price EachMfr. Mfr. Part No. 1 105 Foot Spools577-1808-5F White 0.035 3.10 2.57577-1809-5F Yellow 0.055 3.07 2.55577-1810-5F Green 0.075 3.01 2.89577-1811-5F Blue 0.098 3.34 3.17577-1812-5F Brown 0.13 3.82 3.16577-1813-5F Red 0.193 4.24 4.0610 Foot Spools577-1808-10F White 0.035 5.29 5.10577-1809-10F Yellow 0.055 5.32 5.13577-1810-10F Green 0.075 5.41 5.22577-1811-10F Blue 0.098 5.99 4.94
WonderMask P Temporary Solder Mask
• Non-ammoniated• Non-flammable
• Non-corrosive• Compatible with gold and copper leads
For quantities greater than listed, call for quote.MOUSER STOCK NO. Size Price EachMfr. Mfr. Part No. 1 5577-2211-8SQ 8 oz. tube 13.08 12.53
mouser.com/techspray (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Ben
ch T
op S
uppl
ies
Tech
spra
y
2340
TECHSPRAY Dusters, Freezers, Cleaners, and Tester
HIGH VELOCITY VORTEX DUSTERVortex duster provides a high-powered blast to remove contaminants, lint, and dust. Formulated with HFC-134a, this exceptionally pure, moisture free, inert gas removes particles without the use of harmful solvents.
DUSTER100% HFCs, no CFCs, no HCFCs.
Formulated with HFC-134a, this exceptionally pure, moisture free, inert gas removes particles without the use of harmful solvents. Because HFCs do not harm the ozone, this product has a zero ozone depletion factor. This product removes microscopic contaminates, lint, dust, metallic oxide deposits, and other soils.
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-1671-10S A 10oz. aerosol 15.62 15.23577-1671-10RS B 10oz. aerosol refill for 577-1671-10SK 17.89 17.25577-1671-15S A 15oz. aerosol 22.43 22.17
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-1697-8S C 8oz. aerosol, invertible 20.48 16.81577-1697-10S A 10oz. aerosol 17.60 17.04
CIRCUIT BOARD REPAIR PENS - TRACE TECHNOLOGIES
Provides a convenient method for touch-up cleaning of flux residues.Flux Remover Pen
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-2506-N D 11.5ml pen 9.43 8.43
Conductive PenRepair traces and link components with fast drying silver ink.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-2505-N D 4.89ml pen 47.66 45.40
Designed to insulate PCB traces and components against high voltage arcing and repair solder resist.Overcoat Pen
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-2509-GN D 5ml pen, green 15.30 13.92
No-clean Flux Dispensing PenFor quantities greater than listed, call for quote.
MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-2507-N D 11.5ml pen 7.29 6.54
FREEZE SPRAY
A HFC-134a based, rapidly evaporating liquid that chills to minus 62°F. Zero ozone depletion factor. Used as a trouble shooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. Also detects cold solder joints, cracks in PCB's, and oxidized junctions.
100% HFCs, no CFCs, no HCFCs
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-1672-10S E 10oz. aerosol 15.83 15.39577-1672-15S E 15oz. aerosol 24.16 23.30
ANTI-STATIC FREEZE SPRAY
A rapidly evaporating HFC-134a product that contains an anti-static agent. Zero ozone depletion factor. Used as a trouble shooting aid in static sensitive areas for intermittently faulting capacitors, resistors, semiconductors, and other defective components. Also detects cold solder joints and oxidized junctions.
100% HFCs, no CFCs, no HCFCs
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-1747-10S E 10oz. aerosol 21.85 21.07
Label and adhesive remover is a specially designed, hydrocarbon cleaner that safely removes labels and adhesive gums from equipment and products. Effectively removes gummy residues, labels, stickers, ink marks, beverage spills and other contaminants commonly found on equipment housings without damaging plastics. Solvent has a pleasant citrus odor.
LABEL AND ADHESIVE REMOVER
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-1613-6S F 4.5oz. aerosol 13.67 13.05
No CFCs, contains HCFCs. Quickly penetrates and flushes away grease, dirt, oil, dust, and oxidized surface metals leaving a thin protective coating of silicone to lubricate and protect.
CLEANER - LUBRICANT -KLEEN-IT G3
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-2421-12S F 12oz. aerosol 21.57 20.52
SURFACE CLEANING
2 wipes per package. Soft and low-linting microfiber terry cloth. Ideal for cleaning and polishing LCD and screens, plexi-glass, chrome and other sensitive surfaces. Effective wet or dry. Washable.
LCD/Plasma Screen Cleaning Wipes
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-2368-2 G 16"x16" dry wipes 7.40 6.80
50 wipes per package. Cleans and polishes glass or plastic. Ideal for removing fingerprints and light oils without the us of solvent cleaners. Low-Linting. Washable.
Glass and Plastic Cleaning Wipes
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price EachMfr. Mfr. Part No. 1 5577-2363-50 G 8"x8" dry wipes 72.30 64.21
A B
C D
E F
G
mouser.com/techspray (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Bench Top Supplies
Techspray
2341
TECHSPRAY Brushes, Wipes, Swabs, and CleanersSTATIC SENSITIVE BRUSHESUse these brushes for your specific needs, whether you are cleaning sensitive optics or scrubbing heavy soils. The bristle cut is designed to offer optimum cleaning with minimum effort.• ESD Safe stainless steel or natural horsehair• Anodized aluminum handles
MOUSERSTOCK NO.
Tech SprayPart No. Fig. Bristle Material Bristle Width Price Each
1 12577-2040 2040-1 A Horse Hair 1/8" 14.89 13.35577-2042 2042-1 A Horse Hair 3/8" 23.85 21.67577-2043 2043-1 A .003 Stainless Steel 3/8" 24.70 22.89
GENERAL CLEANING BRUSHES• Non-Static Bristles • Easy-Grip Handles
MOUSERSTOCK NO.
Tech SprayPart No. Fig. Handle
MaterialBristle
MaterialBrushFace
Price Each1 12
577-2020 2020-1 A Wood Horse hair 1/4" x 1 3/8" 3.67 3.41577-2021 2021-1 A Wood Hog's hair 1/4" x 1 3/8" 5.55 5.28577-2022 2022-1 A Wood Hog's hair 7/8" x 2 1/8" 11.95 11.39
Whether you are cleaning sensitive optics or scrubbing heavy soils, this bristle cut brush is designed to offer optimum cleaning with minimum effort. Handles are designed for a comfortable fit.
TECHNICAL CLEANING BRUSHES
MOUSERSTOCK NO.
Tech SprayPart No. Fig. Handle
MaterialHandleLength
BristleLength
Price Each1 12
577-2030 2030-1 B Stainless Steel 3 1/2" 1/8" 9.58 8.82577-2031 2031-1 C Stainless Steel 4 1/2" 1/4" 10.51 9.99577-2032 2032-1 D Zinc Plated Steel 4 1/2" 1/2" 10.10 9.60577-2033 2033-1 E Zinc Plated Steel 4 1/2" 7/16" 7.34 6.78
Features:• 2350 Techclean Wiper - General-purpose cellulose/polyester wipe - high absorbency, and low linting• 2351/2352 Techclean Absorbwipe - Soft polyester wipe for sensitive surfaces• 2353/2354 Techclean Ultrawipe - Textured cellulose/polyester wipe for more aggressive cleaning• 2355 Techclean Purwipe - Very low lint, reusable polyester wipe• 2357 Techclean Twillwipe - Tough cotton twill wipe for abrasive surfaces• 2359 Techclean SMT Blue Wipe - Economical cellulose/polyester wipe for general maintenance• 2362 Anti-Static Wipe - ESD-safe wipe for static-controlled environments
TECHCLEAN WIPES
Not Folded*MOUSER
STOCK NO.Tech Spray
Part No. Fig. Description Size Price Each1 6 12
* 577-2350-100 2350-100 F General Purpose, 100pk 9" x 9" 24.26 22.91 21.87* 577-2351-100 2351-100 F Absorbwipe, 100pk 4" x 4" 8.96 8.54 8.02* 577-2352-100 2352-100 F Absorbwipe, 100pk 9" x 9" 25.43 24.10 22.91* 577-2355-100 2355-100 F Purwipe, 100pk 9" x 9" 44.80 42.46 40.36* 577-2357-100 2357-100 F Twillwipe, 100pk 6" x 6" 28.92 28.18 27.54* 577-2359-300 2359-300 F Bluewipe, 300pk 9" x 9" 45.83 43.55 41.25
577-2362-150 2362-150 F Anti-static wipe, 150pk 9" x 9" 113.81 108.53 103.25
TECH SWABSMOUSER
STOCK NO.Tech Spray
Part No. Fig. Description SizePrice Each
1 6 12577-2300-100 2300-100 G Double Tip Cotton, 100pk 3/16" 5.63 4.89 4.51577-2300-1000 2300-1000 G Double Tip Cotton, 1000pk 3/16" 38.32 36.75 35.52577-2301-100 2301-100 H Single Tip Cotton, 100pk 3/16" 4.33 4.08 3.86577-2301-1000 2301-1000 H Single Tip Cotton, 1000pk 3/16" 27.24 25.72 24.56577-2302-50 2302-50 I Broad Tip Foam, 50pk 7/16" 22.65 21.62 21.06577-2302-1000 2302-1000 I Broad Tip Foam, 1000pk 7/16" 276.30 255.50 244.50577-2303-50 2303-50 J Narrow Tip Foam, 50pk 1/4" 21.61 20.58 19.55577-2306-50 2306-50 K Super-Tip Foam, 50pk 1/2" 20.71 19.68 19.02577-2306-1000 2306-1000 K Super-Tip Foam, 1000pk 1/2" 280.56 264.97 252.85577-2313-30 2313-30 L Double-Tip Pointed, 30pk 1/8" 7.08 6.90 6.75
RENEW™ ECO-FRIENDLY CLEANERS AND WIPESIntroducing TECHSPRAY RENEW™ branded cleaners, innovative solutions that combine the best of current “green” technologies to make the most powerful green cleaners on the market.
MOUSERSTOCK NO.
Tech SprayPart No. Fig. Size Price
Each577-1500-QT 1500-QT A 1 quart 9.94577-1500-G 1500-G - 1 gallon 23.18
Eco-Shower Degreaser
577-1505-100DSP 1505-100DSP B 100pk pre-saturated wipes 9.41
Eco-Shine Glass and Surface Cleaner
577-1570-100DSP 1570-100DSP B 100pk pre-saturated wipes 18.95577-1570-QT 1570-QT A 1 quart 13.80577-1570-G 1570-G - 1 gallon 25.94
Eco-Stencil SMT Cleaner
577-1573-G 1573-G - 1 gallon 25.95
Eco-Oven Cleaner
577-2340-100 2340-100 C 100pk Cotton Wipers-9" x 9" 24.65577-2342-300 2342-300 D 300pk Task Wipers-4.4" x 8.3" 4.18
Eco-Cleaning Wipes
A B
C D
E F
G H
I J
K L
A B
C D
mouser.com/techspray (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Ben
ch T
op S
uppl
ies
Tech
spra
y
2342
TECHSPRAY Cleaners, Static Control and Coatings
CONFORMAL COATINGS
ZERO CHARGE™ STATIC CONTROL PRODUCTS
Isopropyl Alcohol99% pure, anhydrous isopropanol for all purpose cleaning. Excellent for tape head cleaning, removal of fluxes, light oils, polar soils, and white mineral residue. Can be used as a thinner for most fluxes.
IPA Cleaning Wipes Blue Maintenance WipesSMT STENCIL CLEANING
Low-linting wipes saturated with 70% IPA, 30% Di water. Ideal for effective and economical cleaning. Clean SMT stencils, electrical contact, equipment surfaces, circuit boards and more. Folded for convenient packaging.
Hydroentangled cellulose/polyester wipe with high absorbency and durable wet or dry. Ideal for production and maintenance applications.
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-1608-100DSP A 100 ct pop-up
wipes24.54 23.47
For quantities greater than listed, call for quote.MOUSER STOCK NO.
Fig. SizePrice Each
Mfr. Mfr. Part No. 1 5577-2364-50 B 12" x 12" (50 ct.) 10.63 9.42577-2365-300 B 9" x 9" (300 ct.) 31.13 28.73
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Fig. Size
Price EachMfr. Mfr. Part No. 1 5577-1610-50PK C 50 packets 38.45 34.37577-1610-100DSP - 100 pkg. wipes 27.21 26.02577-1610-P D 1 pt. plastic 11.00 10.57577-1610-PT D 1 pt. trigger 13.14 12.88
A B C D
F G H I J
mouser.com/techspray (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
A B C D E
Mat and Table Top CleanerRemoves insulating contaminants such as flux residues, oils, greases, nicotine, dirt, and grime. Eliminates charge and prevents static charge build-up. For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1733-QT A 1qt. trigger 14.54
Removes hand oils, ink marks, dust, fingerprints, nicotine, syrup, carbon, and other soils from work areas. Safe on most plastics.
Screen and Keyboard Cleaner
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1743-50PK B 50 pkg box 25.38
Hand LotionFormulated with aloe vera for a deep, penetrating, soothing action. Contains no silicone or lanolin. Non-greasy, non-sticky, odorless, and fast absorbing. For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1702-8FP C 8oz. pump 7.54
Eliminates static charge and reduces triboelectric generation from most surfaces. Recommended for applications that experience flexing and movement and for plastics such as polyethylene, polypropylene, and other similar surfaces.
Anti-Static Coating
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1726-QT A 1qt. trigger 14.85
GLASS CLEANERRemoves hand oils, ink marks, dust, finger prints, nicotine, syrup, carbon and other soils from work area. Safe on most plastics. For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1625-18S D 18oz. 4.78
CONFORMAL COATING REMOVERRemoves most conformal coatings, including: acrylic, epoxy, urethane, and some silicones. It can also be used to remove enamels, paints, varnishes, and lacquers. Quickly removes tar, adhesives, crayon, rubber, and carbon.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2510-N - 10ml pen 10.92
TURBO-COATAn acrylic conformal coating dries tack-free in 3 minutes. Thick Coating, One-Pass Application. Available in spray or brush on.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2108-12S E 12oz. aerosol 24.22577-2108-P - 1 pint. Glass 27.61
Fine-L-Kote™ SRFlexibility allows for vibration, movement, and rapid changes in temperature. Offers chemical resistance and is recommended for harsh environments. Can be reworked by applying soldering iron, or complete removal by using the conformal coating remover (577-2510-P).
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2102-12S D 12oz. 32.57
Fine-L-Kote™ ARProvides insulation against high voltage arcing and corona shorts. Product offers limited resistance to common alcohols, ketones, and esters.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2103-12S D 12oz. 25.48
Fine-L-Kote™ URUrethane conformal coating. Highly resistant to most solvents, moisture, and fungus. Can be reworked by applying soldering iron, or complete removal using conformal coating remover (577-2510-P).
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2104-12S D 12oz. 29.12
Fine-L-Kote™ HTA silicone resin, conformal coating exhibiting excellent adhesion properties. Fine-L-KoteTM HT coating offers complete versatility. Removal can be accomplished with conformal coating remover (577-2510-P).
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2106-12S D 12oz. 28.29
CONFORMAL COATINGS (CONT.)
TECHCLEAN™ CARD READER CLEANERA one time use, pre-saturated card. Removes dirt, magnetic oxides, and other contaminates from credit card readers, ATM/POS terminals, and other magnetic or photo card reading apparatus.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1603 F 1 card 1.80
TRANSISTOR SILICONE GREASEUsed to coat the bases of power transistors as they are connected to heat sinks. Heat conductive grease will draw heat away from the transistor allowing it to run cooler. For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1977-DP G 4oz. tube 15.89
HEAT SINK COMPOUNDA silicone-free compound applied under power transistors and other devices that generate heat to assist in transferring heat from generating objects to metal chassis for dissipation. Temperature range from -40°C to +200°C.
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-1978 H 4oz. tube 28.76577-1978-1 I 1lb. tub 60.02
Single component cyanoacrylate adhesive that exhibits high strength, fast bonding, and high impact holding. Having a medium viscosity, flows into small openings (up to .004 inches).
TECH HOLD™ GENERAL PURPOSE ADHESIVE
For quantities greater than listed, call for quote.MOUSER STOCK NO. Fig. Size Price
EachMfr. Mfr. Part No.577-2503 J 3 gram 3.09
This page of product is RoHS compliant.
Conductive layer (metallized fabric)
Adhesive layer (acrylic conductivepressure sensitive adhesive)Release paper
Supplies
2343
Tapes and EMC Products3M™ HIGH PERFORMANCE ADHESIVE TRANSFER TAPES - 200MPADHESIVEPopular choice for graphic attachmentand membrane switch applications.
• Excellent diecut and process
3M™ XYZ-AXIS ELECTRICALLY CONDUCTIVE ADHESIVE TRANSFER TAPES
• 24 month shelf life
For reliable and effective attachment of EMI/RFI shields and gaskets to electronic devices.
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Size Price Each1 10
517-9712-1 1" x 36yds 59.78 56.75517-9712-1/2 1/2" x 36yds 45.65 43.17517-9712-1/4 1/4" x 36yds 26.36 24.00517-9713-1 1" x 36yds 103.42 96.34517-9713-1/2 1/2" x 36yds 60.25 57.24
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Size Price Each1 10
517-467MP-2 2" X 60yds 46.88 42.16517-467MP-3 3" x 60yds 56.90 47.68517-468MP-2 2" X 60yds 57.51 51.25517-468MP-3 3" x 60yds 82.32 76.55517-468MP-3/4 3/4" x 60yds 18.41 17.62
3M™ ASSORTED TAPESFor quantities greater than listed, call for quote.
MOUSERSTOCK NO. Backing Adhesive Size Price Each
1 10Polyimide Film Tape for Insulating and Motor Applications517-92-50/36 Polyimide Film Thermosetting Silicone .50" x 36yds 27.42 26.06517-92 Polyimide Film Thermosetting Silicone .75" x 36yds 45.49 43.19Polyimide Film Tape - Solvent-Resistant517-01205-50/36 Polyimide Film Thermosetting Silicone .50" x 36yds 23.63 21.99517-01205 Polyimide Film Thermosetting Silicone .75" x 36yds 41.58 37.71Conductive Anti-Static Tape with Symbol517-40PR-75/36 Polyester Film Antistatic Polymer .75" x 36yds 11.42 10.64517-40PR-75/72 Polyester Film Antistatic Polymer .75" x 72yds 21.15 20.09517-40PR-50/72 Polyester Film Antistatic Polymer .50" x 72yds 13.29 12.38
• Adhesive: Water soluble synthetic• Color: Hazy, transparent• 12 month shelf life
3M™ ALUMINUM FOIL TAPESTapes 425 and 427 are 5 mil nominal dead soft aluminum foil backing combined with a transparent acrylic adhesive. Tape 427 offers an easy-release liner.
• Color: Shiny silver• Adhesive: Acrylic• 24 month shelf life
3M™ WATER-SOLUBLE WAVE SOLDER TAPETape 5414 has a poly-vinyl alcohol backing which is water soluble and a synthetic water soluble adhesive to mask gold fingers on printed circuit boards during wave soldering.
For quantities greater than listed, call for quote.517-5414 1/2" x 36yds 53.96 41.15
For quantities greater than listed, call for quote.517-425-1 1" x 60yds 32.46 32.46517-425 2" x 60yds 61.61 53.57517-427 2" x 60yds 76.98 70.54
Provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. They can replace rivets, spot welds, liquid adhesives and other permanent fasteners.
3M™ VHB™ TAPES
• Solvent and moisture resistance• Made with acrylic foam
• Excellent durability
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Color AdhesiveType
FoamType Size Price Each
1 10517-4941-1 Gray Multi Purpose Conform 1" x 36yds. 149.16 138.68517-4941-1/2 Gray Multi Purpose Conform 1/2" x 36yds. 69.50 65.25517-4950-1 White Gen Purpose Firm 1" x 36yds. 143.61 124.68517-4950-1/2 White Gen Purpose Firm 1/2" x 36yds. 62.62 59.48517-4950-3/4 White Gen Purpose Firm 3/4" x 36yds. 92.76 88.12517-4949-3/4 Black Gen Purpose Firm 3/4" x 36yds. 115.08 106.95517-4951-1 White Low Temp Apply Firm 1" x 36yds. 172.68 160.56517-4945-1 White Multi Purpose Firm 1" x 36yds. 171.68 162.25517-4910-1/2 Clear Gen Purpose - 1/2" x 36yds. 50.92 48.34517-4952-1 White Low Surf Energy Firm 1" x 36yds. 166.91 155.21517-4611-1 Dark Gray Gen Purpose Firm 1" x 36yds. 62.55 59.43517-4611-1/2 Dark Gray Gen Purpose Firm 1/2" x 36yds. 44.25 42.05517-4611-3/4 Dark Gray Gen Purpose Firm 3/4" x 36yds. 48.78 46.35517-4622-1 White Gen/Multi Purpose Conform 1" x 36yds. 60.73 56.47517-4622-1/2 White Gen/Multi Purpose Conform 1/2" x 36yds. 32.16 32.11517-5952-1/2 Black Modified Very Conform 1/2" x 36yds. 63.54 59.11517-5952-3/4 Black Modified Very Conform 3/4" x 36yds. 42.25 38.02
3M™ LOW STATIC POLYIMIDE FILM TAPETranslucent, polyimide film-backed silicone adhesive tape with unique and extremely low electrostatic discharge properties.• Shelf life - 12 months• Mask for protection for PCB during wave solder or solder dip process• Used as release surface in fabrication of parts cured at elevated temperatures
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Color AdhesiveType
FoamType Size Price Each
1 10Series 5419517-5419-1/4 Gold Silicone Polyimide 1/4" x 36yds. 20.74 19.68517-5419-1/2 Gold Silicone Polyimide 1/2" x 36yds. 37.75 35.11517-5419-3/4 Gold Silicone Polyimide 3/4" x 36yds. 53.88 51.19517-5419-1.5 Gold Silicone Polyimide 1 1/2" x 36yds. 119.39 113.43517-5419-2 Gold Silicone Polyimide 2" x 36yds. 141.50 134.44Series 5433, Linered Version517-5433-1 Amber Silicone Polyimide 1" x 36yds. 74.54 70.82
3M™ METALLIZED POLYESTER CLOTH TAPE
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Description Size Price Each1 10
517-2191FR Nickel on Copper Plated Ripstop .75" x 21.8yds. 90.77 80.39517-CN-3190 Nickel on Copper Plated Ripstop .75" x 54.5yds. 136.40 120.78
• Adhesive-Acrylic Conductive
Lightweight, conformable oxidation resistant and high strength for EMI shielding and grounding.
3M™ EMI/RFI FOIL SHIELDING TAPES
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Description SizeW x L: in.
Price Each1 10
517-1170 3.2 Mil Aluminum Foil, Conductive Acrylic 1" x 18yds. 54.33 50.53517-1170-50/18 2.0 Mil Aluminum Foil, Acrylic Conductive .50" x 18yds. 26.67 24.53517-1181-1.0 1.4 Mil Copper Foil, Acrylic Conductive 1" x 18yds. 50.75 47.76517-1181-1/2 1.4 Mil Copper Foil with smooth finish .5" x 18yds. 23.69 22.03
† 517-1182 1.4 Mil Copper Foil, Acrylic Conductive Coated .75" x 18yds. 40.52 37.70517-1183 1.4 Mil Tin Plated Copper Foil, Acrylic Conductive .75" x 18yds. 38.38 35.70517-1194 1.4 Mil Copper Foil, Acrylic Non-Conductive .75 x 18yds. 37.09 34.49517-1245-1.0 Embossed Copper Foil, Acrylic Non-Conductive 1" x 18yds. 41.76 38.84517-1245-1/2 Embossed Copper Foil, Acrylic Non-Conductive .5" x 18yds. 21.04 19.58517-1345 Embossed Tin-Plated Copper Foil, Acrylic
Non-Conductive.75" x 18yds. 40.72 37.02
Coated on Both Sides†
Copper foil electrical tapes provide an easy-to-apply, timesaving, cost-effective way to shield against EMI/RFI radiation. Foil tapes are conductive through the adhesive and offer mechanical, electrical and thermal values to meet your shielding effectiveness and frequency requirements.
• Meets UL 510 requirements for flame retardency
3M™ EMI ABSORBING MATERIALSEMI Absorbing can suppress radiated noise in broadband frequency. Thin, flexible, and easily die cut.
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Specifications Size Price Each1 10
517-AB5010 0.1mm, [email protected] to >6GHz 8.26 x 10.0" 9.05 8.52517-AB5020 0.2mm, -3dB@825MHz to >6MHz 8.26 x 10.0" 99.96 90.86517-AB5030 0.3mm, -3dB@800MHz to >6GHz 8.26 x 10.0" 10.78 10.09517-AB5100S-210MM 1.0mm, -3dB@600MHz to >6MHz 8.26 x 10.0" 67.89 63.55517-AB5010S 0.1mm, -3dB@850MHz to >6GHz 8.26 x 11.8" 9.43 6.97
• Backing: Silicone rubber with magnetic filler• Self-adhesive sheet allows easy prototyping for EMC solutions • Nonconductive Acrylic • New, larger sizes available
Transparent†
3M™ SERIES 851 CIRCUIT PLATING TAPE
For quantities greater than listed, call for quote.MOUSER
STOCK NO. Color AdhesiveType
FoamType Size Price Each
1 10517-851-1/2 Green † Silicone / Rubber Polyester † 1/2" x 144yds. 15.38 14.62517-851-1 Green † Silicone / Rubber Polyester † 1" x 144yds. 26.33 25.03
• For printed circuit board masking• Shelf life - 12 months• Unique conformable adhesive
mouser.com (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
LAIRD TECHNOLOGIES NI/CU POLYESTER CONDUCTIVE FABRIC TAPE, ECOGREENFor quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Tensile Strength(Kgf/mm)
Size Price EachLength
(m)Width(mm)
Thickness(mm) 1 10 25 50
739-46X1N01320.NN00 7/25 20 13 0.06 62.14 60.28 57.37 55.46739-46X1N01920.NN00 7/25 20 19 0.06 62.14 60.28 57.37 55.46739-46X1N02520.NN00 7/25 20 25 0.06 96.68 93.80 89.26 86.29739-46X7401320.NN00 7.5/25 20 13 0.075 62.14 60.28 57.37 55.46739-46X7401920.NN00 7.5/25 20 19 0.075 62.14 60.28 57.37 55.46739-46X7402520.NN00 7.5/25 20 25 0.075 62.14 60.28 57.37 55.46739-46X7501320.NN00 7.5/25 20 13 0.075 62.14 60.28 57.37 55.46739-46X7501920.NN00 7.5/25 20 19 0.075 62.14 60.28 57.37 55.46739-46X7502520.NN00 7.5/25 20 25 0.075 68.94 66.88 63.65 61.53
• Adhesive Type: Pressure Sensitive Acrylic• Color: Gray• Material: Nickel, Copper Coated Polyester
2391, 2392, 2393
2360R, 2370R2371R
2360, 2370, 2371
Supp
lies
3M
2344
3M™ Cleaners and Protection SuppliesADJUSTABLE FABRIC WRIST STRAPSThe front line of defense in all static control processes. One size adjusts to any size wrist to provide reliable, 360 degree protection.
74P7
4600 SERIES COST EFFECTIVE WRIST BANDS & CORDS
A B
These wrist bands consist of a molded insulative thermoplastic colored exterior with an integrally molded conductive interior insert and 4mm metal male snap.
STATIC-DISSIPATIVE FIELD SERVICE KITSStatic-safe workstations in a portable format for the field service technician.
8501 Portable Field Service Kit 8505 Portable Field Service Kit
WORKSTATION MONITOR• Continuously monitors the resistance of the work surface, operator, and wiring connections• Monitors a visitor to the workstation as well as the primary operator• Uses 2300 Series wrist straps
WRIST STRAP MONITOR• Small and compact• Battery operated
• Continuously monitors one worker• Uses 2300 Series wrist straps
• Clip on belt
• Adjustable fabric wrist band• Heavy-duty static-dissipative work surface (.021" x 22" x 24") with two 8" x 11" pockets and 5 ft. coiled ground cord• Common-point ground cord system with 10' section for wrist band and 5' section for mat
• Static-dissipative work surface (.015" x 15" x 20") with pocket• Adjustable wrist band• Wrist strap, 5 ft. ground cord, 5 ft. extension ground cord, 5 ft work surface ground cord
A powerful unit for high efficiency clean up of most business equipment.
Features:• 1 HP motor• 3 year warranty• Stretch hose extends from 2" to 10'
ELECTRONICS VACUUM
Replacement Filter
• Comes complete with wand, crevice tool, crevice brush, dusting brush, needle nozzle, and Type 2 filter• Attachments and power cord store inside door of high impact plastic case• Portable, quick set up and efficient safe operation
• Includes alligator clip
2300 SERIES DUAL CONDUCTOR CORDS3M™ Dual Conductor Ground Cord is part of a personnel ground monitoring system. The 3M™ Workstation Monitors Models 724, 725, and 790 use a dual conductor type wrist strap system consisting of a dual conductor wristband and ground cord. The dual system allows for a monitored loop resistance measurement, which includes the wristband contact to the wearer and a redundant grounding path. If one conductor of the system fails, the other can still function maintaining the grounding of the person. As a result, this prevents static from being generated by the person, eliminating possible exposure to static-sensitive electronic components. The 2300 series are compatible with all existing 3M dual conductor fabric, metal, and thermoplastic wristbands.
NOVEC™ AEROSOL CLEANERS
3M™ SCC INSTRUMENTATIONCombination wrist strap/tester allows associates to test their own wrist straps, heel grounders or shoes. Wrist strap monitors measures the resistance of the wrist strap and person to ensure proper operation of the wrist strap and connection of the grounding product to a person.Features:• Compatible with standard single wire wrist straps• Easy to use• Audible and visual alarm
3M™ SCC GROUND CORDS AND GROUND BLOCK• Table mat ground cord LPCGC151M connect a mat and two wrist straps.• Floor mat ground cord FGC151M has domed profile to help avoid tripping.• Ground block WSGR2 mounts to bench and connects two wrist straps to ground. Two parking studs reduce damage to cords left at the bench. No resistor.
* Includes one MΩ resistor and #10 ring terminal
WSMONITOR2
For quantities greater than listed, call for quote.
MOUSERSTOCK NO. Description
Price Each1 5
517-32917 Flux Remover 12 oz. 23.69 21.63517-32925 Electronic Degreaser 12 oz. 24.40 22.28517-32933 Contact Cleaner 11 oz. 24.65 23.81
MOUSERSTOCK NO.
3MPart No. Description
Price Each1 5
517-724 724 Workstation monitor with 732 remote input jack and mounting hardware
172.81 162.01
MOUSERSTOCK NO.
3MPart No. Description
Price Each1 5
Straight Connection517-4720 4720 Dual Conductor wrist band, blue 8.03 7.79517-23600 2360 Coiled, 5 ft. working length 26.62 24.71517-23700 2370 Coiled, 10 ft. working length 29.97 28.47517-2371 2371 Coiled, 20 ft. working length 37.95 35.04517-23680 2368 Dual conductor adj. wrist band 12.88 11.88Right Angle Connection517-2360R 2360R Coiled, R/A connection, 5 ft. length 27.72 26.35517-2370R 2370R Coiled, R/A connection, 10 ft. length 34.59 32.88517-2371R 2371R Coiled, R/A connection, 20 ft. length 41.02 38.98
MOUSERSTOCK NO.
3MPart No. Description Price Each
1 5517-725 725 725 Portable wrist strap monitor 100.66 94.38
MOUSERSTOCK NO.
Price Each1 5
517-8501 69.61 66.98
MOUSERSTOCK NO.
Price Each1 5
517-8505 146.05 142.45
For quantities greater than listed, call for quote.
MOUSERSTOCK NO. Description Price
Each517-497AJM 115V electronics vacuum, 5.0 Amps 282.51Replacement Filters517-SF1 Small Particle: traps extremely fine particles in the range of .3-.5 microns from highly sensitive equipment. 29.44517-MF2 Medium Particle: traps toner and dust from copiers, laser printers, and other office equipment. 13.98
MOUSERSTOCK NO.
3MPart No. Description
Price Each1 5
517-COMBOTESTER COMBOTESTER Heel grounder/Wriststrap Tester with stand
453.84 413.26
517-WSMONITOR1 WSMONITOR1 Wrist strap monitor - 1 Wrist strap 65.07 60.52517-WSMONITOR2 WSMONITOR2 Wrist strap monitor - 1 Wrist strap
and 1 Mat115.60 107.50
MOUSERSTOCK NO.
3MPart No. Description
Price Each1 10
* 517-FGC151M FGC151M Floor Ground Cord, 15' cord, 3/8" stud 18.54 13.98* 517-LPCGC151M LPCGC151M Low Profile Ground Cord, 3/8" stud 11.84 11.48
517-WSGR2 WSGR2 Bench Ground Block, 10' cord 13.37 12.66
MOUSERSTOCK NO. Fig. Description
Price Each1 5
517-4610 A 5 foot lightweight coiled cord, 4mm snap end 10.39 9.65517-4611 A 10 foot lightweight coiled cord,4mm snap end 12.77 11.67517-4620 B Blue wrist band with 4mm stud 3.70 3.59
For quantities greater than listed, call for quote.
MOUSERSTOCK NO. Description
Price Each1 5
517-2214 Adjustable band, 5 foot coiled cord 24.48 21.97517-2204 Adjustable band only 7.86 6.91517-2210C 5 foot coiled cord only 20.22 18.91517-22240 Adjustable band, 10 ft coiled cord 32.12 27.53517-2271 Economy adjustable strap 4.12 3.92517-2272 Econo. adj. strap w/ 5' coiled cord 10.41 9.32
• Non-ozone depleting• Contains no nPB, HFCs, or HAPS• HCFC-141b alternative
• Non-Corrosive• Non-Flammable
• Includes alligator clip• Single Conductor
mouser.com/3m (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
SuppliesD
esco
2345
COMBO TESTER
Features:• Tests wrist straps and foot grounders• Positive rocker switch actuation• LED's display test results• Battery powered with low-battery indicator
DESCO Static Control and Lead Free Products
STATFREE T2™ - DISSIPATIVE DUALLAYER RUBBER
Features:• Durable rubber material, dissipative (106 -108 Ω) on one side and conductive on the other• Versatile and long-lasting product; use as a dissipative work surface table mat• Bottom conductive layer provides reliable path to ground, compatible for use with continuous monitors• Superior heat, chemical, and wear resistance
† Includes groundcord
MOUSERSTOCK NO.
DescoPart No. Description Price
Each† 809-66050 66050 Dark Gray, 0.060" x 24" x 36" 88.41† 809-66055 66055 Dark Gray, 0.060" x 24" x 48" 109.77
STATFREE® CONDUCTIVEFOAM
Features:• Antistatic, low tribo-charging• Dissipative - corrosion resistant• Uniform protection• 103 - 105 Ω
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-12660 12660 Cross Linked, 1/4" x 24" x 35" 75.20809-12250 12250 High Density, 1/4" x 24" x 36" 22.90809-12350 12350 High Density, 3/8" x 24" x 36" 40.37809-12450 12450 High Density, 1/2" x 24" x 36" 64.31
ESD SUSCEPTIBILITYLABELS
Features:• Identifies that ESD controls are required to protect items.• 500 labels per roll
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-06722 06722 2" x 2", roll 15.09809-06730 06730 2" x 2" Reusable, roll 16.38
STATFREE T2™ LEAD-FREE AREA DISSIPATIVE DUAL LAYER RUBBER MATSThese green mats are laser engraved "Lead-Free Workstation" to identify the workstation as a Lead-Free work area.
Features:• Superior heat, chemical and wear resistance• Dissipative work surface• Lightly embossed surface • Durable rubber material, dissipative on one side and conductive on the other• Non-humidity dependence• Dimensionally stable and lays flat• Lifetime warranty (limited to Electrical)
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-66057 66057 .060" x 24" x 36", Green 105.77809-66058 66058 .060" x 24" x 48", Green 126.40
ESD STACKING BOARD HANDLER TRAY
Features:• Trays that can stack and nest together for improved use of space• Great container for Kanban
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-37750 37750 18" x 11-3/8” x 1-3/4" 15.66
ANTISTATIC CLEAR CELLULOSE TAPE
Features:• Ideal in packaging for container sealing, static shielding bag closure, and holding DIP tubes• Prevents damage to sensitive electronic components in manufacturing
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-79210 79210 Cellulose with symbols .75" x 72 yards 7.59809-79211 79211 Cellulose with symbols 1" x 72 yards 9.41
STATSHIELD® TRANSPARENTMETAL IN STANDARD ESDSHIELDING BAGS
Features:• 40% light transmission• Integral antistatic, low tribo-charging properties• Polycarbonate compatible containing no amines or N-octanic acid
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-13415 13415 4" x 6" 100-pack 7.13809-13430 13430 5" x 8" 100-pack 11.31809-13445 13445 6" x 10" 100-pack 13.61809-13465 13465 8" x 12" 100-pack 22.46809-13470 13470 10" x 12" 100-pack 25.92
MOUSERSTOCK NO.
DescoPart No. Description Price
Each809-19250 19250 Combo Wrist and Footground NIST 285.26
mouser.com/desco (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Supp
lies
MG
Che
mic
als
2346
MG CHEMICALS Cleaners, Degreasers and Cold Sprays
Used to locate thermal intermittent electronic components, PCB cracks, cold solder joints, and oxidized junctions. Freezes gum and adhesives for easy removal. Protects heat-sensitive components during soldering. Chills to- 51°C (-60°F)
SUPER COLD 134A Features:• 100% HFC 134A gas • 100% Ozone safe• Zero residue• Variable valve allows greater user control
For quantities greater than listed, call for quote.590-403A-285G 403A-285G B Aerosol 285G (10oz.) 11.38 11.25590-403A-400G 403A-400G B Aerosol 400G (14oz.) 16.61 16.48
Cleans and protects with electronic grade silicones for lubrication. Suitable for use on tuners, switches, locks, contacts, office equipment, keyboards, and plastic parts.
Contact Cleaner with Electronic Grade Silicones
For quantities greater than listed, call for quote.590-404B-140G 404B-140G G Aerosol 140G (5oz.) 7.39 7.03590-404B-340G 404B-340G G Aerosol 340G (12oz.) 12.87 12.22
Use when requiring a contact cleaner with lubrication that offers long-term protection from oxidation. Reduces contact scrubbing and reduces connection wear and abrasion failures. Protects, lubricates and deoxidizes ICs, connectors, jacks, relays, controls, potentiometers and more. Safe on plastics.
Super Contact Cleaner
For quantities greater than listed, call for quote.590-801B-125G 801B-125G H Aerosol 125G (4.5oz.) 14.55 13.82
Heavy Duty Flux RemoverPenetrates to quickly remove all non-ionic and ionic soils found in post-solder applications. Will harm delicate plastic components. Excellent for dissolving flux on the solder side of PC boards. Evaporates quickly.
For quantities greater than listed, call for quote.590-413B-425G 413B-425G J Aerosol 425G (15oz.) 16.82 15.98
A special blend of ethyl alcohol, isopropanol and ethyl acetate. Excellent for removing rosin, non-rosin, no clean fluxes, and ionic contamination. Safe on plastic components. Moderate evaporation.
Flux Remover For PC Boards
For quantities greater than listed, call for quote.590-4140-400G 4140-400G K Aerosol 400G (14oz.) 13.95 13.25
Use for leaded and lead free soldering. Fully activated. Offers superior fluxing ability. Instant wetting. After soldering, the rosin residue is non-corrosive, non-conductive, moisture and fungus resistant.
FLUX AND FLUX REMOVERSRosin Flux
For quantities greater than listed, call for quote.
MOUSER STOCK NO.
MG Chemicals Part No. Fig. Description
Price Each1 5
590-835-100ML 835-100ML I Liquid 125ml (4.2oz.) 8.41 8.16
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Fig. Description Price Each1 5
590-408A-125ML 408A-125ML M Liquid 125ml (4.2oz.) 8.24 7.81
Rejuvenates and conditions rubber. Apply with a cloth, brush or swab to bring belts, platens, rollers, and rubber parts back to life. Use with adequate ventilation.
Rubber Renue
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Fig. Description Price Each1 5
590-8361-140G 8361-140G L Aerosol 140G (5oz) 10.64 10.11
SPECIALIZED CLEANERS
Easy to use on most surfaces to remove gummy residues from unwanted labels.Label and Adhesive Remover
LCD Cleaning Wipes Non-streaking • Anti-static • GermicidalGentle formulation safely cleans LCD and plasma screens, including laptops. Also effective for killing germs on telephones, keyboards, peripherals, or desktops. (90 wipes)
For quantities greater than listed, call for quote.590-8242-RTS 8242-RTS N 50 wipe container 5.95 5.65590-8242-W 8242-W - 25 Individually Per Box 17.26 16.34
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Fig. Description Price Each1 5
590-8243-W 8243-W O Presaturated, 25 per box 17.26 16.34
SPECIALTY WIPES
Individually packaged wipe is formulated to clean lenses, glasses, goggles, and other optics. It has a special anti-fog formula to give you longer lasting clarity. Streak free and safe on anti-glare screens.
Optical Wipe
A B C D E F G H
I J K L M N O P
SUPER DUSTER 134A
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
MG Chemicals Part No. Fig. Description
Price Each1 5
590-402A-285G 402A-285G A Aerosol 285G (10oz.) 10.11 10.00590-402A-450G 402A-450G A Aerosol 450G (16oz.) 15.32 15.21
Removes microscopic dust, lint, and foreign particles. Cleans computers and keyboards, photographic and audio/video equipment, coin counters, printers, timing devices, cash machines, optical equipment, fax machines and other electromechanical instruments.
Features:• 100% HFC 134A gas• Ozone safe• Zero residue
CLEANER AND DEGREASERSIsopropyl Alcohol
For quantities greater than listed, call for quote.590-824-100ML 824-100ML C Liquid 100ml (3.5oz.) 5.94 5.64590-824-500ML 824-500ML C Liquid 500ml (16oz.) 8.94 8.51590-824-450G 824-450G - Aerosol 450G (16oz.) 12.61 11.98590-824-1L 824-1L C Liquid 1L (35oz.) 12.49 11.86590-824-W 824-WX50 - 50 per bag 25.83 24.89590-8241-T 8241-T - 75 wipes in tub 8.95 8.50590-8241-W 8241-W - 25 per Box 70/30 IPA Wipes 17.26 16.34
Used as a general all-purpose cleaner. Very effective as a flux remover. Also used on cleaning PC boards, Fiber optics, Semi-conductors and Connectors and contacts. Safe on plastics. 99.953% Pure Anhydrous
For quantities greater than listed, call for quote.590-4050A-450G 4050A-450G D Aerosol 450G (16oz.) 14.73 13.80
Super WashUse when a rapidly drying cleaner degreaser is required. Perfect for quickly cleaning PC boards. Rapid dry time makes this product an excellent product for rinsing away other slower drying solvents. Also great for rinsing dissolved flux. Extremely flammable.
Safety Wash
For quantities greater than listed, call for quote.590-406B-425G 406B-425G E Aerosol 425G (16oz.) 14.92 14.21
Effective at removing oils, greases, inorganic and organic soils, smoke, flux, and ionic residues from PC boards, office and medical equipment, connectors, electronic or mechanical parts, relays and semi-conductors. Flammable.
CONTACT CLEANERSElectrosolve Contact Cleaner
For quantities greater than listed, call for quote.
MOUSER STOCK NO.
MG Chemicals Part No. Fig. Description
Price Each1 5
590-409B-140G 409B-140G F Aerosol 140G (5oz.) 7.39 7.02590-409B-340G 409B-340G F Aerosol 340G (12oz.) 12.95 12.30
Use when a zero residue contact cleaner is required. An effective and powerful cleaner that quickly penetrates and dissolves most soil types. For use on most electronic parts and equipment including connectors, contacts, LED's, PCB's components, circuit breakers, tuners and microprocessors.
Kimberly-Clark KIMTECH SCIENCE Delicate Task Wipers
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Fig. Description Price Each1 5
590-830-34133 830-34133 P 11.8" x 11.8" 196 wipes per box 12.00 11.36590-830-34155 830-34155 P 4.4" x 8.4" 280 wipes per box 5.78 5.46
KIMTECH SCIENCE KIMWIPES Delicate Task Wiper is a light duty wiper that can handle a variety of delicate tasks. Easily wipes up liquid and dust. Anti-stat dispensing reduces lint and electrostatic discharge, controls usage and portability reduces waste.
mouser.com/mgchemicals (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
SuppliesM
G C
hemicals
2347
MG CHEMICALS Silicones, Epoxies, and KitsGE RTV SILICONESTheir primary uses are for adhering, bonding part together; sealing out moisture, environmental contaminants and UV; insulating against mechanical stress, vibration and the effects of thermal cycling; providing electrical protection; and for formed-in-place gasketing (FIPG).
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
MG ChemicalsPart No. Size Type Color Features
Price Each
1 5590-RTV102-85ML RTV102-85ML 85ml (2.8oz.), Tube Paste White High Performance 13.08 11.79590-RTV103-85ML RTV103-85ML 85ml (2.8oz.), Tube Paste Black High Performance 14.20 12.79590-RTV106-85ML RTV106-85ML 85ml (2.8oz.), Tube Non-Conductive Paste Red High Temperature 53.15 50.45590-RTV108-85ML RTV108-85ML 85ml (2.8oz.), Tube Paste Translucent High Temperature 12.12 10.93590-RTV118-85ML RTV118-85ML 85ml (2.8oz.), Tube Flowable Translucent High Temperature 41.16 40.12590-RTV162-300ML RTV162-300ML 300ml (10oz.), Cartridge Non-Conductive Paste White Mil Spec and UL recognized 45.71 44.69590-RTV162-85ML RTV162-85ML 85ml (2.8oz.), Tube Non-Conductive Paste White Mil Spec and UL recognized 27.29 26.68590-RTV11-1P RTV11-1P 1 pint, 1 lb. Flowable-SS4155 Primer Req. White Potting High Voltage App 113.19 109.30590-RTV60-1P RTV60-1P 1 pint, Pail Pourable Paste Red Extreme High Temp, two part 179.92 171.89
SUPER SHIELD SILVER COATED COPPER CONDUCTIVE COATINGA highly conductive acrylic paint designed to reduce electromagnetic or radio frequency interface (EMI/RFI). It may also act as a conductive base for low temperature electroplating process or for any other manufacturing process where it is necessary to impart conductivity to a surface.
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Size Price Each
590-843-140G 843-140G 140g (5oz.) Aerosol 40.58590-843-340G 843-340G 340g (12oz.) Aerosol 91.95
THERMAL MANAGEMENT GREASES AND LUBRICANTS
Lubricate and protect connections from moisture and corrosion. Formulated to improve electrical and thermal conductivity.
MOUSERSTOCK NO.
MG ChemicalsPart No. Size Type
Price Each1 5
590-846-80G 846-80G 80g (5oz.) Tube Carbon Conductive Grease
14.95 14.20
590-8461-85ML 8461-85ML 85ml (3oz.) Liquid Tube White Lithium Grease 6.95 6.65590-8462-85ML 8462-85ML 85ml (3oz.) Liquid Tube Translucent Silicone
Grease13.46 12.78
590-860-150G 860-150G 150g (5oz.) Tube Silicone Heat Transfer Compound
16.95 16.10
ENCAPSULATING AND POTTING EPOXY COMPOUNDSProtects sensitive components from impact, vibration, heat, shock, conductivity, moisture, chemicals, and analysis.
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
MG ChemicalsPart No. Size Color
Price Each1 5
590-832B-375ML 832B-375ML 375ml (12oz.) Black 34.82 33.19590-832B-3L 832B-3L 3L (0.8gal.) Black 154.96 151.13590-832C-375ML 832C-375ML 375ml (12oz.) Clear 33.53 31.91590-832C-3L 832C-3L 3L (0.8gal.) Clear 149.96 146.25590-832-TC-450ML 832-TC-450ML 450ml (16oz.) Black 46.40 44.20590-832HT-375ML 832HT-375ML Liquid 375ml (12oz.) - 49.70 48.24590-832HT-3L 832HT-3L Liquid 3L (0.8gal.) - 204.95 199.88590-833FRB-375ML 833FRB-375ML Liquid 375ml (12oz.) Black 48.01 45.62
Features:• Non-conductive• Water and chemical resistant• Type: 832B and 832C-General Purpose, 832FRB-Flame Retardant, 832-TC-Thermally Conductive
EPOXIES
Silver Conductive Epoxy
Fast Set Epoxy
Provides 2300 psi bonding strength to paper, wood, metal, and ceramics. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents. Easy 1:1 mixing ratio. Fast setting (5 minutes).
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
MG ChemicalsPart No. Size
Price Each1 5
590-8331-14G 8331-14G Two 7g syringes, 3ml each 56.42 54.33
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
MG ChemicalsPart No. Size
Price Each1 5
590-8332-25ML 8332-25ML Dual Syringe 25ml (1oz.) 7.39 7.03
This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards.
THREADLOCKERS
Features: • One drop prevents loosening and ensures a secure hold• Pick the strength you need, stop corrosion, seal threads, improve torque control, reduce galling, and minimize inventories
For quantities greater than listed, call for quote.
MOUSER STOCK NO.
MG ChemicalsPart No. Description Size Price
Each590-8701-10ML 8701-10ML Low Strength for fasteners up to 1/4" 10ml (0.2oz.) 8.24590-8702-10ML 8702-10ML Medium Strength for fasteners up
to 3/4"10ml (0.2oz.) 8.24
590-8703-10ML 8703-10ML High strength, permanent for fasteners up to 1"
10ml (0.2oz.) 9.27
590-8704-10ML 8704-10ML High strength, wicking for fasteners up to 1"
10ml (0.2oz.) 9.27
590-8704-50ML 8704-50ML High strength, wicking for fasteners up to 1"
50ml (2oz.) 29.95
SILVER CONDUCTIVE GREASE
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Description Price Each1 5
590-8463-7G 8463-7G Silver Conductive Grease 24.71 24.35
This Silver Grease provides maximum electrical and thermal conductivity between sliding surfaces, while providing protection frommoisture and corrosion. Typical applications include lubrication of substation switches or circuit breakers, heat dissipation from transformers, or static grounding on seals or O-rings.
LUBRICANTNu-trol Control CleanerCleans and lubricates controls, locks, hinges, selector switches, office equipment, power tools, clock mechanisms, and delicate mechanical equipment. Fast dry. Safe on plastics.
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Size Price Each1 5
590-401B-140G 401B-140G Aerosol 140g (5oz.) 7.92 6.92590-401B-340G 401B-340G Aerosol 340g (12oz.) 12.86 12.22
Penetrating OilRapidly dissolves corrosion and rust. Quickly releases seized nuts, bolts, and other mechanical parts. Cleans and lubricates metal parts.
For quantities greater than listed, call for quote.MOUSER
STOCK NO.MG Chemicals
Part No. Size Price Each1 5
590-8472-450G 8472-450G Aerosol 450g (16oz.) 13.46 12.73
mouser.com/mgchemicals (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
Supp
lies
MG
Che
mic
als
2348
• Meets J-STD-004 and QQ-S-571• Melting Point: 183°C/361°F• Standard Flux Core percentage at 2.2%
• RA Flux Core• Standard Flux Core percentage at 2.2%
Excellent wettability, no clean, non-conductive, non-tacky residues, compatible with lead free and leaded solder systems, thixotropic paste.
• RA Flux Core• Meets J-STD-004 and J-STD-006• Standard Flux Core percentage at 2.2%• Melting Point: 183°C/361°F
MG CHEMICALS Solder Products
This No Clean formula uses synthetically refined resin and an effective activator. This no clean formula wets and spreads like normal RA flux and does not splatter.
Sn63/Pb37 Leaded Solder - No CleanLead Free Solder - Sn96 (SAC305)
Lead Free Solder - Sn99
Super Wick Desoldering Braid (No Static and No Clean)
Super Wick for Lead Free Solder
TIP TINNER
Sn60/Pb40 Leaded Solder - No Clean
Sn63/Pb37 Leaded Solder
Sn60/Pb40 Leaded Solder
No Clean Flux Paste
This No Clean Lead-Free Solder was designed with Sn/Ag/Cu alloys as a lead-free alternative for the stand Tin and Lead solder. These alloys conform to the impurity requirements of J-Std-006 and RoHS.
WIRE SOLDER WIRE SOLDER (LEAD FREE)
FINE BRAID SUPER WICK
• Meets J-STD-004 and QQ-S-571• Melting Point: 183°C/361°F• Standard Flux Core percentage at 2.2%
• Hard non-conductive residues• Exceeds the impurity requirements of J-Std-006• Excellent wettability
• Oxide-free clean copper• Static free bobbins
• Hard non-conductive residues• Exceeds the impurity requirements of J-Std-006• Excellent wettability
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Dia.
(in.)Weight(lbs.)
Price EachMfr. Mfr. Part No. 1 10 25590-4860-18G 63/37 .032 6 oz. 3.18 2.99 2.79590-4865-227G 63/37 .032 0.5 20.74 19.45 18.16590-4865-454G 63/37 .032 1.0 31.86 29.88 27.87
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Dia.
(in.)Weight(lbs.)
Price Each
Mfr. Mfr. Part No. 1 5590-4900-35G SAC305 .032 6 oz. 6.32 6.07590-4900-112G SAC305 .032 0.25 29.15 28.14590-4900-227G SAC305 .032 0.5 47.73 46.55
For quantities greater than listed, call for quote.
MOUSER STOCK NO. Width (in.)
ColorCode
Spool Length (ft.)
Price Each
Mfr. Mfr. Part No. 1 5590-423 .025 White 5 2.85 2.70590-424 .050 Yellow 5 2.85 2.70590-425 .075 Green 5 2.95 2.79590-426 .100 Blue 5 3.15 2.99590-427 .125 Brown 5 3.81 3.62590-442 .050 Yellow 25 13.33 12.67590-443 .075 Green 25 13.33 12.67590-444 .100 Blue 25 14.45 13.72590-452 .050 Yellow 50 25.71 24.42590-453 .075 Green 50 25.71 24.42590-454 .100 Blue 50 26.98 25.64590-462 .050 Yellow 100 51.01 48.45590-463 .075 Green 100 51.01 48.45590-464 .100 Blue 100 52.82 50.18590-474 .100 Blue 500 186.63 181.10
For quantities greater than listed, call for quote.
MOUSER STOCK NO. Width (in.)
ColorCode
Spool Length (ft.)
Price Each
Mfr. Mfr. Part No. 1 5590-424-NS .050 Yellow 5 3.15 2.99590-425-NS .075 Green 5 3.27 3.10590-426-NS .100 Blue 5 3.62 3.43590-453-NS .050 Yellow 50 29.37 27.91590-454-NS .100 Blue 50 31.37 29.78
For quantities greater than listed, call for quote.
MOUSER STOCK NO. Width (in.)
ColorCode
Spool Length (ft.)
Price Each
Mfr. Mfr. Part No. 1 5590-424-LF .050 Yellow 5 3.65 3.46590-425-LF .075 Green 5 3.84 3.65590-426-LF .100 Blue 5 4.30 4.09
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description
Price Each
Mfr. Mfr. Part No. 1 10590-4910-28G 28G (1 oz.) Solid 10.02 9.39
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Dia.
(in.)Weight(lbs.)
Price Each
Mfr. Mfr. Part No. 1 5590-4901-112G SN99 .032 0.25 15.95 15.55590-4901-227G SN99 .032 0.5 28.75 28.03590-4901-2LB SN99 .032 2.0 43.13 41.93
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Dia.
(in.)Weight(lbs.)
Price Each
Mfr. Mfr. Part No. 1 10 25590-4870-18G 60/40 .032 6 oz. 3.18 2.99 2.79590-4875-227G 60/40 .032 0.5 20.09 18.86 17.59590-4875-454G 60/40 .032 1.0 31.86 29.88 27.87
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Dia.
(in.)Weight(lbs.)
Price Each
Mfr. Mfr. Part No. 1 10 25590-4880-18G 63/37 .032 6 oz. 3.18 2.99 2.79590-4884-227G 63/37 .025 0.5 18.84 18.20 17.58590-4884-454G 63/37 .025 1.0 33.53 31.44 29.34590-4885-227G 63/37 .032 0.5 21.21 19.91 18.56590-4885-454G 63/37 .032 1.0 31.85 29.85 27.86590-4886-227G 63/37 .040 0.5 21.20 19.89 18.56590-4886-454G 63/37 .040 1.0 31.85 29.86 27.87590-4887-227G 63/37 .050 0.5 21.20 19.89 18.56590-4887-454G 63/37 .050 1.0 33.53 31.44 29.32590-4888-227G 63/37 .062 0.5 21.20 19.89 18.56
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Alloy Dia.
(in.)Weight(lbs.)
Price Each
Mfr. Mfr. Part No. 1 10 25590-4890-18G 60/40 .032 6 oz. 3.18 2.99 2.79590-4894-227G 60/40 .025 0.5 20.09 18.84 17.59590-4894-454G 60/40 .025 1.0 33.53 31.41 29.32590-4895-227G 60/40 .032 0.5 20.08 18.84 17.58590-4895-454G 60/40 .032 1.0 31.85 29.87 27.86590-4896-227G 60/40 .040 0.5 21.20 19.89 18.56590-4896-454G 60/40 .040 1.0 31.85 29.86 27.87590-4897-227G 60/40 .050 0.5 21.20 19.89 18.56590-4897-454G 60/40 .050 1.0 33.53 31.41 29.32590-4898-227G 60/40 .062 0.5 21.20 19.89 18.56590-4898-454G 60/40 .062 1.0 33.51 31.44 29.34
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description
Price Each
Mfr. Mfr. Part No. 1 10 25590-8341-10ML 10mL/8G/10CC Syringe 9.75 9.49 9.18
mouser.com/mgchemicals (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
This page of product is RoHS compliant.
PrototypingM
G C
hemicals
2349
A B
C D
MG CHEMICALS Copper Clad Boards & Prototyping Products
Ideal for extreme conditions. It is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.
URETHANE CONFORMAL COATING
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Size
Price EachMfr. Mfr. Part No. 1 5590-4223-55ML Bottle 55mL (2 oz.) 11.95 11.35
Use to protect electric circuits against moisture, dirt, dust, thermal shocks, and scratches that could corrode, short circuit or otherwise damage the electric component. Super fast cure.
ACRYLIC CONFORMAL COATING
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Size
Price Each
Mfr. Mfr. Part No. 1 5590-419C55ML Bottle 55mL (2oz.) 11.94 11.18590-419C-340G Aerosol 340G (12 oz.) 18.96 17.98590-419C-1L Liquid 1L (35 oz.) 50.11 47.58
Ideal for high temperature environments. It is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.
SILICONE CONFORMAL COATING
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Size
Price Each
Mfr. Mfr. Part No. 1 5590-422B-55ML Bottle 55mL (2 oz.) 11.95 11.35590-422B-340G Aerosol 340G (12 oz.) 22.45 20.71590-422B-1L Liquid 1L (35 oz.) 78.23 75.04
Lint free, synthetic suede bonded to a bendable handle allowing access to hard to reach areas. Great for cleaning rotary audio, video and computer tape backup heads. Available single headed or double headed for economy.
CHAMOIS SWABS
For quantities greater than listed, call for quote.
MOUSER STOCK NO.Description
Price Each
Mfr. Mfr. Part No. 1 5590-810D-15 Double head (15 pack) 11.90 11.36590-810D-50 Double head (50 pack) 36.95 35.10
Shred resistant, 100% urethane foam heads with 100 PPI porosity over extra absorbent U.S.B pharmaceutical grade purified cotton. Bonded securely to a 6" birch staff. Compatible with most solvents.
FOAM OVER COTTON SWABS
For quantities greater than listed, call for quote.590-812-50 50 pack 20.95 19.91
Our presensitized boards provide high resolution and excellent fine line control. They are ideal for prototypes, small production runs, and student training. White protective peel-off liner is attached to protect board from incident light and scratching. We also offer a large thin (12 x 18 x 1/32 inch) cat#675 paper phenolic presensitized board (Easy Cutting!!), perfect for cutting into smaller boards with no special equipment. Perfect for the classroom.
POSITIVE PRESENSITIZED BOARDS
For quantities greater than listed, call for quote.
MOUSER STOCK NO. PCBThickness
Dimension(in.) Copper
Price Each
Mfr. Mfr. Part No. 1 5Single Sided590-603 1/16 3" x 5" 1oz. 7.95 7.26590-606 1/16" 4" x 6" 1oz. 8.75 7.99590-609 1/16" 6" x 6" 1oz. 9.95 9.26590-612 1/16" 6" x 9" 1oz. 14.65 12.99590-687 1/32" 4" x 6" 1oz. 8.95 8.25590-689 1/32" 6" x 9" 1oz. 14.65 12.99Paper Phenolic Single Sided590-675 1/32" 12" x 18" 1oz. 31.70 28.99Double Sided590-650 1/16" 6" x 6" 1oz. 13.70 12.64590-660 1/16" 6" x 9" 1oz. 18.75 17.78590-690 1/32" 6" x 9" 1oz. 18.75 17.78590-698 1/64" 6" x 9" 1oz. 18.75 17.78
COPPER CLAD BOARDS
For quantities greater than listed, call for quote.
MOUSER STOCK NO. PCBThickness
Dimension(in.) Copper
Price Each
Mfr. Mfr. Part No. 1 5Single Sided590-503 1/16" 3" x 5" 1oz. 3.45 3.37590-540 1/16" 3" x 5" 1oz. 4.94 4.70590-506 1/16" 4" x 6" 1oz. 4.64 4.41590-509 1/16" 6" x 6" 1oz. 5.94 5.60590-512 1/16" 6" x 9" 1oz. 8.94 8.48590-515 1/16" 8" x 10" 1oz. 11.95 11.25590-521 1/16" 12" x 12" 1oz. 15.75 14.59590-586 1/32" 4" x 6" 1oz. 4.94 4.70590-588 1/32" 6" x 9" 1oz. 8.94 8.47Double Sided590-550 1/16" 6" x 6" 1oz. 7.44 7.07590-555 1/16" 12" x 12" 1oz. 19.20 17.99590-587 1/32" 4" x 6" 1oz. 5.65 5.36590-589 1/32" 6" x 9" 1oz. 9.74 9.27
We offer 1/16, 1/32 and 1/64 FR4 laminate with 1 ounce copper per square foot. This flame retardant laminate is translucent in color and made of continuous woven glass cloth impregnated with epoxy resin. The copper on 1 ounce board is 1.34 mil thick (0.0341mm). The boards are made of FR4 which is a flame retardant version of G-10 material. Developed specifically for the circuit processing industries requirements. Complies with Mil-S-13949H-GFK. Provides ultraviolet blocking and fluorescence when using automated optical inspection (AOI). UL #E37002A
Economy Etching Process Kit: 416-ESIdeal for Students and hobbyists. Accommodates two 8" x 9" 2-sided CCBs
Includes:• 5 litre etching tank• Air pump and tubing
• Sparging unit• Vinyl gloves
• Complete instructions• Contains no chemical products
PROTOTYPING KITSProfessional Etching Process Kit: 416EEtches copper clad circuits professionally. Accommodates two 8" x 12" 2-sided CCBs
Includes:• 7 liter heavy duty Polyethylene etching tank• Sturdy mounting bracket• Clear acrylic lid• Heavy duty air pump• 3-way adjustable airline manifold• Triple line sparging unit
• 200 watt side mounting immersion heater with quartz element and adjustable temperature control• Adhesive digital thermometer• Bag of vinyl gloves• Complete instructions• Maximum board thickness: .062"• Contains no chemical products
• No printing or exposure required
Rub-On Etch Resistant Kit: 416ERIncludes 7 unique sheets of the most commonly used shapes in circuit board creation. Also comes with a sheet to custom cut your own shape.
Features:• Perfect finish every time• Sharp edges
MOUSERSTOCK NO.
MG ChemicalsPart No. Fig. Description Price
Each590-416ER 416ER A Rub-On Etch Resistant Kit 9.95590-416E 416-E B Professional Etching Process Kit 194.98590-416ES 416-ES C Economy Etching Kit 57.47590-416X 416-X D Exposure Kit 67.92
mouser.com/mgchemicals (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
Exposure Kit: 416-XConvenient kit includes major components required to expose presensitized copper-clad boards.
• Fluorescent light fixture with stand (brackets)Includes:• Exposure Tube• Clear acrylic weight for artwork• Complete instructions
Prot
otyp
ing
2350
Schm
artB
oard
SCHMARTBOARD Prototyping System
mouser.com/schmartboard (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
A B
C D
E F
G H
I J
K L
M N
O P
Q
MOUSERSTOCK NO.
SchmartBoardPart No. Fig. Description Size Price Each
1 5872-201-0110-01 201-0110-01 N USB Mini B Connector 0.5" x 2" 2.50 2.38
USB MINI CONNECTOR • Through Hole Board
SMT CONNECTOR BOARDS
MOUSERSTOCK NO.
SchmartBoardPart No. Fig. Description Size/Pitch Price Each
1 10872-202-0038-01 202-0038-01 O 1.25mm Pitch SMT Connector Board 1.25mm Pitch Connectors up to 72 Pins 9.99 9.49872-202-0039-01 202-0039-01 O 1.0mm Pitch SMT Connector Board 1.0mm Pitch Connectors up to 72 Pins 9.99 9.49872-202-0041-01 202-0041-01 O .5mm Pitch SMT Connector Board .5mm Pitch Connectors up to 72 Pins 9.99 9.49872-912-0041-01 912-0041-01 O 10 pack of part 202-0041-01 .5mm Pitch Connectors up to 72 Pins 80.00 76.00
• Supports all “Top Latch” FFC type SMT connectors. (Does not support “Bottom Latch” type) • For SMT connectors from companies like Hirose, Molex, Samtec, and Tyco
RASPBERRY PI BREADBOARDS AND SHIELD KITS
MOUSERSTOCK NO.
SchmartBoardPart No. Fig. Description Price Each
1 10Breadboards872-710-0010-01 710-0010-01 P Bare board only, T/H 10.00 9.50872-710-0010-02 710-0010-02 P Shld w/2 hdrs & board, SMT 13.00 12.35Shield Kits - SMT872-710-0010-03 710-0010-03 P ez SOT 23 & SC70 18.00 17.10872-710-0010-04 710-0010-04 P ez 1.27mm Pitch SOIC 18.00 17.10872-710-0010-06 710-0010-06 P ez .65mm Pitch SOIC 18.00 17.10872-710-0010-13 710-0010-13 P ez .635mm Pitch SOIC 18.00 17.10
MOUSERSTOCK NO.
SchmartBoardPart No. Fig. Description Price Each
1 10Shield Kits (Cont.) - ez 0.5mm Pitch, SMT872-710-0010-07 710-0010-07 P SOIC 18.00 17.10872-710-0010-15 710-0010-15 P 12/24P QFP/N 18.00 17.10872-710-0010-16 710-0010-16 P 16/20P QFP/N 18.00 17.10872-710-0010-17 710-0010-17 P 32P QFP/QFN 18.00 17.10872-710-0010-21 710-0010-21 P 8 Pin DFN 18.00 17.10872-710-0010-22 710-0010-22 P 10 Pin DFN 18.00 17.10872-710-0010-44 710-0010-44 P 40P QFP/QFN 18.00 17.10872-710-0010-45 710-0010-45 P 44P QFP/QFN 18.00 17.10
WIRE JUMPER HACKER KITS
MOUSERSTOCK NO.
SchmartBoardPart No. Fig. Color
Price Each1 10
872-920-0123-01 920-0123-01 Q Red 5.00 4.75872-920-0124-01 920-0124-01 Q Black 5.00 4.75
MOUSERSTOCK NO.
SchmartBoardPart No. Fig. Color
Price Each1 10
872-920-0125-01 920-0125-01 Q White 5.00 4.75872-920-0126-01 920-0126-01 Q Yellow 5.00 4.75872-920-0127-01 920-0127-01 Q Blue 5.00 4.75872-920-0128-01 920-0128-01 Q Green 5.00 4.75872-920-0129-01 920-0129-01 Q Clear 5.00 4.75872-920-0130-01 920-0130-01 Q Multi-Color 5.00 4.75
Change male to female, connect females to create a longer jumper, splice bare wires together, color code jumpers to differentiate signals and other modifications.
Each Kit Includes: 42 pcs of 1.0" heat shrink tubes & a row of extra-long headers
ADAPTERS
MOUSERSTOCK NO.
SchmartBoard Part No. Fig. Pitch
(mm) DescriptionPrice Each MOUSER
STOCK NO.SchmartBoard
Part No.Price Per 10 Pack
1 10 1 10872-204-0003-01 204-0003-01 A 0.95 SOT23 & SC70 SMT to DIP 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0004-01 204-0004-01 B 1.27 SOIC to DIP 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0006-01 204-0006-01 C 0.65 SOIC to DIP 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0007-01 204-0007-01 D 0.5 SOIC to DIP 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0013-01 204-0013-01 E 0.635 SOIC to DIP 6.00 5.70 872-914-0013-01 914-0013-01 48.00 45.60872-204-0014-01 204-0014-01 F 0.5 48 Pin QFP/QFN 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0015-01 204-0015-01 G 0.5 12 & 24 Pin QFP & QFN 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0016-01 204-0016-01 H 0.5 16 & 20 Pin QFP & QFN 6.00 5.70 - - - - - - - - - - - - - - - -872-204-0017-01 204-0017-01 I 0.5 32 Pin QFP and QFN 6.00 5.70 872-914-0017-01 914-0017-01 48.00 45.60872-204-0018-01 204-0018-01 F 0.5 64 Pin QFP/QFN 7.00 6.65 872-914-0018-01 914-0018-01 56.00 53.20872-204-0018-31 204-0018-31 F 0.5 (2) 204-0018-01 plus 830
Test Point BB14.00 13.30 - - - - - - - - - - - - - - - -
872-204-0019-01 204-0019-01 F 0.5 56 Pin QFP/QFN 6.00 5.70 872-914-0019-01 914-0019-01 48.00 45.60872-204-0019-31 204-0019-31 F 0.5 (x2) 204-0019-01 plus 830
Test Point BB12.00 11.40 - - - - - - - - - - - - - - - -
872-204-0021-01 204-0021-01 J 0.5 8 Pin DFN to DIP 6.00 5.70 872-914-0021-01 914-0021-01 48.00 45.60872-204-0022-01 204-0022-01 K 0.5 10 Pin DFN to DIP 6.00 5.70 872-914-0022-01 914-0022-01 48.00 45.60872-204-0044-01 204-0044-01 L 0.5 40 Pin QFP/QFN to DIP 6.00 5.70 872-914-0044-01 914-0044-01 48.00 45.60872-204-0045-01 204-0045-01 M 0.5 44 Pin QFP/QFN to DIP 6.00 5.70 872-914-0045-01 914-0045-01 48.00 45.60
• Each comes with a standard row of 40 headers
SCHMARTMODULEMOUSER
STOCK NO.Schmartboard
Part No. Description Price Each1 5
872-710-0001-01 710-0001-01 Populated RS-232 SCHMARTMODULE 15.00 14.25
MOUSERSTOCK NO. Type Size/Pitch Supported Components Price Each
1 5872-710-0006-01 QFP 4" x 4"/0.5mm 48 and 64-pin QFP chips from T.I.’s MSP430,
C2000, and Stellaris Cortex M330.00 28.50
872-710-0009-01 10-bit Analog/digital, a 32-bit multiplier 3" x 2" Fully populated except for the T.I. MSP430F5172 28.00 26.95872-710-0009-02 10-bit Analog/digital, a 32-bit multiplier 3" x 2" Fully populated including the T.I. MSP430F5172 35.00 33.50
TI SCHMARTMODULES
8 BIT PIC® MICROCONTROLLER SCHMARTMODULEMOUSER
STOCK NO. Type Size/Pitch Supported Components Price Each1 5
SOIC Packages/8 Pin Device872-710-0004-01 8 Bit PIC Microcontroller 2" x 2.5" 8, 14, 18, 20 and 28 Pin PIC MCU 15.00 14.258 Bit PIC® Accessory872-920-0055-01 10" PIC® Prog Cable RJ11 to 6pin Female 11" 8 Bit PIC® Cable Assembly 5.00 4.75
PrototypingSchm
artBoard
2351
SCHMARTBOARD Prototyping System
PROTOTYPING BOARDSMOUSER
STOCK NO. Description Supported Components Price Each1 5
SO/SOP Packages872-202-0004-01 SO, 4-56 pins, 2"x2" grid Size/Pitch: 1.27mm SO package, 0603, Through-hole passives 9.99 9.49872-202-0005-01 SOP, 4-72 pins, 2"x2" grid Size/Pitch: 0.8mm SO, SOP, QSOP, SSOP, TSSOP and PSSOP packages, 0603, Through-hole passives 9.99 9.49872-202-0006-01 SOP, 4-72 pins, 2"x2" grid Size/Pitch: 0.65mm SO, SOP, QSOP, SSOP, TSSOP and PSSOP packages, 0603, Through-hole passives 9.99 9.49872-202-0013-01 SOP, 4-72 pins, 2"x2" grid Size/Pitch: 0.635mm SO, SOP, QSOP, SSOP, TSSOP and PSSOP pkgs, 0603, 0805, Through-hole passives 9.99 9.49872-202-0007-01 SOP, 4-72 pins, 2"x2" grid Size/Pitch: 0.5mm SO, SOP, QSOP, SSOP, TSSOP and PSSOP pkgs, 0603, 0805, Through-hole passives 9.99 9.49872-202-0008-01 SOP, 4-72 pins, 2"x2" grid Size/Pitch: 0.4mm SO, SOP, QSOP, SSOP, TSSOP and PSSOP pkgs, 0603, 0805, Through-hole passives 9.99 9.49QFP Packages872-202-0009-02 QFP, 32-64 pins, 2"x2" grid Size/Pitch: 0.8mm QFP, TQFP and PQFP packages, 0603, Through-hole passives 9.99 9.49872-202-0011-01 QFP, 32-100 pins, 2"x2" grid Size/Pitch: 0.5mm QFP, TQFP and PQFP packages, 0603, Through-hole passives 9.99 9.49872-202-0014-01 QFP, 64-100 pins, 2"x2" grid Size/Pitch: 0.4mm QFP, TQFP and PQFP packages, 0603, Through-hole passives 9.99 9.49Chip Scale (QFN) Packages872-202-0016-01 12 to 24-pin, 2"x2" grid Size: 0.5mm/0.65mm QFN package, 0603, Through-hole passives 9.99 9.49872-202-0017-01 10 and 32-pin, 2"x2" grid Size/Pitch: 0.5mm QFN package, 0603, Through-hole passives 9.99 9.49872-202-0018-01 8 and 48-pin, 2"x2" grid Size/Pitch: 0.5mm QFN package, 0603, Through-hole passives 9.99 9.49872-202-0020-01 64-pin, 2"x2" grid Size/Pitch: 0.5mm QFN package, 0603, Through-hole passives 9.99 9.49872-202-0044-01 QFN 40 pins Size/Pitch: 0.5mm EZ, QFN 9.99 9.49872-202-0048-01 QFN 88 pins Size/Pitch: 0.4mm EZ, QFN 9.99 9.49Through Hole872-201-0001-01 0.1" Spacing with 0.05" offset, 2"x2" grid 100% of through hole components with 0.1" spacing pitch 5.00 4.75872-201-0002-01 2mm Spacing with 1mm offset, 2"x2" grid 100% of through hole components with 1mm spacing pitch 5.00 4.75872-201-0302-01 0.1" Spacing with 0.05" offset, 2"x2" grid ¾ of board with signature offset traced rows of holes, ¼ of board with untraced holes 15.00 14.25Universal - Through Hole and SMT872-201-0013-01 2"x2" grid, 19x19 Universal through-hole and surface mount Schmartboard 3.50 3.33EZ Discrete872-202-0034-01 EZ Discrete through hole board #1, 2” x 2” 0201, 0603, 0805, 1206, 1210, 1608, 1812, 2010, 2512, Case-A, B, C 9.99 9.49872-202-0035-01 EZ Discrete through hole board #2, 2” x 2” SOT23-3,5,6, SC70-5,6, DPAK, D2PAK, SOT223, TO263-7,SOT89,0805,1206,Case-A,B,C,D 9.99 9.49I/O and Power Boards (Through Hole)872-201-0100-01 Power and ground strip 0.5"x2" grid Connect the power source or ground 2.50 2.37872-201-0104-01 D-Sub connector 0.5"x2" grid D-sub connector from 9 to 25 pins 2.50 2.37872-201-0108-01 RJ11/45 and USB connector 0.5"x2" grid One RJ11 or one RJ45 connector and 1 USB type B connector 2.50 2.37
PSOC DEVELOPMENT BOARDSMOUSER
STOCK NO.Schmartboard
Part No. Description Price Each1 5
872-710-0008-01 710-0008-01 PSoC 3 and 5LP development board allows you to add PSoC processors and also an I2C EEPROM 18.75 18.75872-710-0008-05 710-0008-05 PSoC 5LP populated development board allows you to add PSoC processors and also an I2C EEPROM 35.00 33.25
mouser.com/schmartboard (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
ARDUINO PROTOTYPING SHIELDS
MOUSERSTOCK NO.
SchmartboardPart No. Type Size/Pitch Price Each
1 5872-206-0001-01 206-0001-01 Thru-hole Proto Shield for Arduino Mega Board Only 2.54mm 13.00 12.35872-206-0004-01 206-0004-01 SOIC SM Arduino Bare Board Only 1.27mm 10.00 9.50872-206-0006-01 206-0006-01 SOIC SM Arduino Bare Board Only 0.65mm 10.00 9.50872-206-0007-01 206-0007-01 SOIC SM Arduino Bare Board Only 0.5mm 10.00 9.50
PCBs & Breadboards
Component KitsMOUSER
STOCK NO.Schmartboard
Part No. Type Size/Pitch Price Each872-206-0001-02 206-0001-02 Thru-hole Proto Shield for Arduino Mega with components and breadboard 2.54mm 18.00 17.10872-206-0004-02 206-0004-02 SOIC SM Arduino Board Kit with Components 1.27mm 15.00 14.25872-206-0006-02 206-0006-02 SOIC SM Arduino Board Kit with Components 0.65mm 15.00 14.25872-206-0007-02 206-0007-02 SOIC SM Arduino Board Kit with Components 0.5mm 15.00 14.25872-206-0001-04 206-0001-04 SOIC/DIP Adapt S/M Arduino Kit 1.27mm 21.00 19.95872-206-0001-13 206-0001-13 SOIC/DIP Adapt S/M Arduino Kit 0.635mm 21.00 19.95872-206-0001-18 206-0001-18 64-pin QFP/QFN to DIP Adapt Arduino Mega Shield Kit 0.5mm 22.00 20.90872-206-0001-19 206-0001-19 56-pin QFP/QFN to DIP Adapt Arduino Mega Shield Kit 0.5mm 21.00 19.95
ACCESSORIESMOUSER
STOCK NO.SchmartBoard
Part No. DescriptionPrice Each
1 5872-920-0003-01 920-0003-01 Schmartbridges 20 pcs. (connect
Schmartboards together)5.00 4.75
872-920-0005-01 920-0005-01 3" Red Female Jumpers, 10 pcs. w/20 headers 6.00 5.70872-920-0006-01 920-0006-01 5" Yellow Fem. Jumpers, 10 pcs. w/20 headers 6.00 5.70872-920-0007-01 920-0007-01 7" Blue Female Jumpers, 10 pcs. w/20 headers 6.00 5.70872-920-0008-01 920-0008-01 3" Red Female Jumpers, 100 pieces 38.00 36.10872-920-0009-01 920-0009-01 5" Yellow Female Jumpers, 100 pieces 38.00 36.10872-920-0010-01 920-0010-01 7" Blue Female Jumpers, 100 pieces 38.00 36.10872-920-0089-01 920-0089-01 (10x) 7" Male-Female Jumpers and 40 headers 7.00 6.65872-920-0090-01 920-0090-01 (10x) 9" Male-Female Jumpers and 40 headers 8.00 7.60872-920-0091-01 920-0091-01 (10x) 12" Male-Female Jumpers & 40 headers 8.00 7.60872-920-0092-01 920-0092-01 7" Male to Female Jumpers (100 pcs.) 45.00 42.75872-920-0093-01 920-0093-01 9" Male to Female Jumpers (100 pcs.) 50.00 47.50872-920-0094-01 920-0094-01 12" Male to Female Jumpers (100 pcs.) 50.00 47.50872-920-0095-01 920-0095-01 25 ea 5", 7", 9" 12" Male-Female Jumpers 50.00 47.50872-920-0095-25 920-0095-25 5 ea 5", 7", 9" 12" Male-Female Jumpers 12.00 11.40872-920-0095-60 920-0095-60 15 ea 5", 7", 9" 12" Male-Female Jumpers 33.00 31.35872-920-0104-01 920-0104-01 (10x) 7" Red Female Jumpers/40 headers 6.00 5.70872-920-0105-01 920-0105-01 (10x) 7" White Female Jumpers/40 headers 6.00 5.70872-920-0106-01 920-0106-01 (10x) 7" Black Female Jumpers/40 headers 6.00 5.70
MOUSERSTOCK NO.
SchmartBoardPart No. Description
Price Each1 5
872-920-0107-01 920-0107-01 (10x) 7" Yellow Female Jumpers/40 headers 6.00 5.70872-920-0108-01 920-0108-01 7" Red Female Jumpers (100 pcs.) 38.00 36.10872-920-0109-01 920-0109-01 7" White Female Jumpers (100 pcs.) 38.00 36.10872-920-0110-01 920-0110-01 7" Black Female Jumpers (100 pcs.) 38.00 36.10872-920-0111-01 920-0111-01 7" Yellow Female Jumpers (100 pcs.) 38.00 36.10872-920-0112-50 920-0112-50 10 ea Yellow/Blue/Red/Black/White
Jumpers/200 headers25.00 23.75
1 10872-920-0031-01 920-0031-01 830 tie points including four independent
common bus lines 7.95 7.55
872-920-0065-01 920-0065-01 (10x) 9" Jumpers and 20 Headers 7.00 6.65872-920-0067-01 920-0067-01 Jumper Combo Kit: 20 ea. of 2", 3", 5", 7", 9" 40.00 38.00872-920-0079-01 920-0079-01 Two 3 prong Female/Female cable harness 12" 5.00 4.75872-920-0080-01 920-0080-01 5 (3) prong Female/Female cable harness 12" 10.00 9.50872-920-0101-01 920-0101-01 Blue BB 170 tie points with adhesive back 3.95 3.75872-920-0102-01 920-0102-01 (5x) 0.1" Spacing 40 extra long, single row 5.00 4.75872-920-0131-01 920-0131-01 (2x) Special 2x13 Stackable Headers, 26-pin 4.00 3.80872-920-0132-01 920-0132-01 (3x) Standard 2x13 Stackable Headers, 26-pin 5.00 4.75872-920-0133-01 920-0133-01 (4x) Short 2x10 Stackable Headers, 20-pin 3.00 2.85872-920-0134-01 920-0134-01 (4x) Short 2x13 Stackable Headers, 26-pin 3.00 2.85872-920-0135-01 920-0135-01 (4x) Short 2x20 Stackable Headers, 40-pin 3.00 2.85
.10 .10
.10.10
.035 .035
Side A Side B
.10 .10
.10 .10
.035 .035
Side A Side B
.10 .10
.10 .10
.035 .035
Side A Side B
.10
.10
.10
.10
.042 .042
Side A Side B
Prot
otyp
ing
Twin
Indu
strie
s
2352
TWIN INDUSTRIES Prototyping Boards
LEAD FREE GENERAL PURPOSE PROTOTYPING BOARDSSpecifications:• FR4 Material • Hole Size: 0.035” (Plated) • Gold Plating over Copper For quantities greater than listed, call for quote.589-8000-410-LF 8000-410-LF B 0.1" x 0.1" grid of non-committed plated through holes, no plane 4 x 10 25.50 23.06589-8000-45-LF 8000-45-LF B 0.1" x 0.1" grid of non-committed plated through holes, no plane 4 x 5 12.75 11.53589-8000-1010-LF 8000-1010-LF B 0.1" x 0.1" grid of non-committed plated through holes, no plane 10 x 10 63.75 60.56589-8100-45-LF 8100-45-LF C 0.1" x 0.1" grid of non-committed plated through holes, one plane 4 x 5 12.75 11.53589-8200-45-LF 8200-45-LF D 0.1" x 0.1" grid of plated through holes, two planes 4 x 5 12.75 11.53
GENERAL PURPOSE PROTOTYPING BOARDS
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Twin IndustriesPart No. Fig. Description Board Size
(in.)Price Each
1 10589-7100-062-4565 7100-062-4565 A 0.1" x 0.1" grid of non-plated .062" through holes 4.5 x 6.5 7.50 6.99589-7100-062-4585 7100-062-4585 A 0.1" x 0.1" grid of non-plated .062" through holes 4.5 x 8.5 11.25 10.47589-7100-45 7100-45 A 0.1" x 0.1" grid of non-plated through holes 4 x 5 4.99 4.74589-7100-410 7100-410 A 0.1" x 0.1" grid of non-plated through holes 4 x 10 9.00 8.38589-7100-1010 7100-1010 A 0.1" x 0.1" grid of non-plated through holes 10 x 10 22.50 20.95589-7100-1020 7100-1020 A 0.1" x 0.1" grid of non-plated through holes 10 x 20 45.00 41.90589-7100-4565 7100-4565 A 0.1" x 0.1" grid of non-plated through holes 4.5 x 6.5 7.50 6.99589-8000-2MM-3U 8000-2MM-3U B 2mm x 2mm grid of plated through holes, no plane 3.9 x 6.3 22.50 20.95589-8000-1020 8000-1020 B 0.1" x 0.1" grid of non-committed plated through holes, no plane 10 x 20 118.00 109.85589-8100-410 8100-410 C 0.1" x 0.1" grid of non-committed plated through holes, one plane 4 x 10 23.60 21.97589-8100-1010 8100-1010 C 0.1" x 0.1" grid of non-committed plated through holes, one plane 10 x 10 59.00 54.93589-8100-4565 8100-4565 C 0.1" x 0.1" grid of non-committed plated through holes, one plane 4.5 x 6.5 19.67 18.31589-8200-410 8200-410 D 0.1" x 0.1" grid of plated through holes, two planes 4 x 10 23.60 21.97589-8200-4565 8200-4565 D 0.1" x 0.1" grid of plated through holes, two planes 4.5 x 6.5 19.67 18.31
Specifications:• FR4 Material • Hole Size: 7050 Series = 0.028”/7100 Series = 0.042”/8000-8200 Series = 0.035” (Plated)
6U VME64/X PROTOTYPING BOARDDedicated probing points for all connector pinsFeatures:• Support for 160 pin DIN Connectors• Support for 2mm P0 Connector• Board Dimensions: 6U x 160MM
• Thickness - 0.062"• Prototyping area with 0.1" x 0.1" grid of plated holes
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Twin IndustriesPart No. Fig. Description
Price Each1 10
589-8198-200 8198-200 B 6U VME64/x prototyping board 149.00 141.55
MACHINE PIN JUMPER WIRES24AWG Jumper wires with machine pin ends. Easy insertion/extraction for repeat usage and quick design changes. Ideal for use with solderless breadboards.
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Twin IndustriesPart No. Fig. Description
Price Each1 10
589-TW-MP-5 TW-MP-5 C 5cm - 10 wires per pack 7.18 6.82589-TW-MP-10 TW-MP-10 C 10cm - 10 wires per pack 7.54 7.16589-TW-MP-20 TW-MP-20 C 20cm - 10 wires per pack 7.90 7.50
ABS PROJECT BOXESTwin Industries ABS Project boxes with custom-fit prototyping boards are sold together under a single part number, eliminating the need to find a compatible board and cut or shape the board to fit box dimensions. Mounting holes are provided to attach boards to lids. Uncommitted board area for mounting board edge connectors or components.Specifications:• Protoboard Material - FR4 laminate• Thickness of board - 0.062"• Box Material - ABS Plastic
• Prototyping holes spaced on 0.1" x 0.1" grid• Mounting holes to attached board to box lid
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
Twin IndustriesPart No. Fig. Description Box Size
(in.)Board Type
Price Each1 10
589-B10-7100 B10-7100 A Box and Prototyping board 4.5 x 2.3 x 1.7 Non-Plated 12.99 12.34589-B10-8000 B10-8000 A Box and Prototyping board 4.5 x 2.3 x 1.7 Plated 13.99 13.29589-B20-7100 B20-7100 A Box and Prototyping board 5.3 x 2.9 x 1.9 Non-Plated 15.99 15.19589-B20-8000 B20-8000 A Box and Prototyping board 5.3 x 2.9 x 1.9 Plated 16.99 16.14589-B30-7100 B30-7100 A Box and Prototyping board 6.3 x 3.7 x 2.4 Non-Plated 17.99 17.09589-B30-8000 B30-8000 A Box and Prototyping board 6.3 x 3.7 x 2.4 Plated 18.99 18.04589-B40-8000 B40-8000 A Box and Prototyping board 7.7 x 4.3 x 2.9 Non-Plated 22.75 22.06589-B45-8000 B45-8000 A Box and Prototyping board 7.7 x 4.3 x 1.4 Non-Plated 21.50 20.42
A
B
C
DIMENSIONS: in.
A B C D E
SOLDERLESS GENERAL PURPOSE BREADBOARDS For quantities greater than listed, call for quote.MOUSER
STOCK NO.Twin Industries
Part No. Fig. Description Board Size (in.)
Price Each1 10
589-TW-E40-510 TW-E40-510 E 1 terminal strip (400 tie points) and 2 distribution strips ( 30 tie points each) 2.14 x 3.3 7.18 6.82589-TW-E40-1020 TW-E40-1020 E 630 Tie Points Terminal Strip & 2 100 Tie Point Distribution Strips 2.14 x 6.5 7.99 7.35589-TW-E41-1020 TW-E41-1020 E 630 Tie Points Terminal Strip & 2 100 Tie Point Distribution Strips +70 Piece Wire Kit 2.14 x 6.5 11.99 11.39589-TW-E41-102B TW-E41-102B E 3 Binding Posts, 630 Tie Points Terminal Strip & 2 100 Tie Point Distribution Strips +70 Piece Wire Kit 2.14 x 6.5 16.99 16.04589-TW-E41-1060 TW-E41-1060 E 4 Binding Posts, 3 630 Tie Points Terminal Strip & 5 100 Tie Point Distribution Strips +140 Piece Wire Kit 5.7 x 6.9 30.98 30.01589-TW-E012-000 TW-E012-000 - 140 Piece Wire Kit with Case - 22AWG Wire - 7.11 6.99
mouser.com/twin (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
ELECTRONICS & TECHNOLOGY COMPANY
General Purpose
L
W
Circbord®
W
H
Plugboard™
W
H
3-Hole solder pad pattern
Zig-zag buses
.10
.042" Generalpurpose
prototyping
.10
.062" Generalpurpose
prototyping
.10
.10
"M" Pattern
.05
.05
.023±.027
Contacts only pattern
Interleaved bus pattern
Pad-per-hole pattern
PrototypingVector
2353
VECTOR Prototyping BoardsVECTORBORD® GENERAL PURPOSE PUNCH BOARDS• .062" thickness • .100" Grid
• Material: FR2 Phenolic, FR4 epoxy glass or CEM-1 epoxy glass composite
VECTORBORD® CIRCBORD® PRINTED CIRCUIT PROTOTYPING BOARDS
Eurocard Size Circbords
VECTORBORD® PLUGBORDS• All bus and circuit patterns are solder-coated• .042 hole diameter• .062" thickness
• .100" Grid• Material: FR4 epoxy glass or CEM-1 epoxy glass composite• Wire Wrap Terminals: T44, T46, T49, T68
• Wire Wrap Socket Pin: R32
• All bus and circuit patterns are solder-coated• .042 hole diameter• .062" thickness
• .100" Grid• Material: FR4 epoxy glass or CEM-1 epoxy glass composite• Wire Wrap Terminals: T44, T46, T49, T68
• Wire Wrap Socket Pin: R32
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
VectorPart No. Fig.
Dimensions: in.Material
Price EachWeight (W) Length (L) 1 10 25
574-64P44WE 64P44WE A1 4.5 6.5 FR4 8.01 7.61 7.23574-64P44XXXP 64P44XXXP A1 4.5 6.5 FR2 8.05 7.48 6.96574-64P44 64P44 A1 4.5 6.5 CEM-1 7.79 7.12 6.76574-84P44WE 84P44WE A1 4.5 8.5 FR4 12.30 11.25 10.03574-169P44C1 169P44C1 A1 4.5 17.0 CEM-1, 1 oz. unplated copper, 1 side 25.22 21.52 20.10574-169P44 169P44 A1 4.5 17.0 CEM-1 14.17 12.09 11.29574-169P44XXXP 169P44XXXP A1 4.5 17.0 FR2 14.87 12.71 11.88574-169P44WE 169P44WE A1 4.5 17.0 FR4 20.97 17.89 16.41574-169P44WEC1 169P44WEC1 A1 4.5 17.0 FR4, 1 oz. unplated copper, 1 side 21.88 18.65 17.43574-169P59032 169P59-032 A1 6.0 17.0 FR4 20.76 17.80 16.54574-169P59047 169P59047 A1 6.0 17.0 FR4 20.28 17.29 16.16574-169P59XXXP 169P59XXXP A1 6.0 17.0 FR2 16.54 15.65 14.31574-169P79WE 169P79WE A1 8.0 17.0 FR4 32.15 27.44 25.63574-169P84 169P84 A1 8.5 17.0 CEM-1 35.40 30.21 28.22574-169P84C1 169P84C1 A1 8.5 17.0 CEM-1, 1 oz. unplated copper, 1 side 41.04 35.03 32.72574-169P84WE 169P84WE A1 8.5 17.0 FR4 30.24 28.12 26.15574-169P84WEC1 169P84WEC1 A1 8.5 17.0 FR4, 1 oz. unplated copper, 1 side 34.91 29.79 27.83574-169P99 169P99 A1 10.0 17.0 CEM-1 43.37 37.01 34.57574-85H48WE 85H48WE A2 4.8 8.5 FR4 16.38 14.97 13.96574-170H48WE 170H48WE A2 4.8 17.0 FR4 30.73 26.22 24.50574-170H85WE 170H85WE A2 8.5 17.0 FR4 47.15 40.24 37.59574-126M76-032 126M76-032 A3 4.0 6.5 FR4 epoxy glass 24.33 20.74 19.34
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
VectorPart No. Fig.
Dimensions: in. 16 PinDIP Material Description Solder
TerminalsWire WrapSocket Pin
Price EachW H 1 10
574-8001 8001 B4 6.5 4.5 20 CEM-1 3-Hole Solder Pad single-sided T42-1,K24C,K31C R32 26.00 24.50574-8002 8002 B5 6.5 4.5 36 CEM-1 Interleaved Buses singled sided T42-1 R32 27.85 25.98574-8003 8003 B6 6.5 4.5 60 CEM-1 Pad Per Hole single-sided T42-1 R32 25.33 24.15574-8007 8007 B6 6.5 4.5 60 CEM-1 Pad Per Hole and Ground Plane T42-1 R32 27.02 26.40574-3677-6 3677-6 B4 8.1 4.5 21 CEM-1 3-Hole Solder Pad single-sided T42-1 R32 21.80 20.71574-45P80-1 45P80-1 B6 8.1 4.5 80 CEM-1 Pad Per Hole 2 sides T42-1 R32 28.05 26.08574-8010 8010 B6 13.0 4.0 124 FR4 Pad Per Hole 2 sides T42-1 R32 42.34 40.88574-8006 8006 B6 13.3 5.0 154 FR4 Pad Per Hole copper plated-thru holes T42-1 R32 45.22 43.18574-8012 8012 B6 11.0 9.2 283 FR4 Pad Per Hole plated-thru holes T42-1 R32 66.00 64.74574-8015 8015 B6 6.0 4.0 72 FR4 Pad Per Hole, 2 sides T42-1, K24C R32 12.79 12.11574-8016 8016 B6 9.0 6.0 165 FR4 Pad Per Hole, 2 sides T42-1, K24C R32 18.79 17.79574-8016-1 8016-1 B6 6.0 6.0 165 FR4 Pad Per Hole, 1 side, plated T42-1, K24C R32 11.75 11.13574-106P106-1 106P106-1 B6 10.6 10.6 275 CEM-1 Pad Per Hole and Ground Plane 2 sides T42-1 R32 59.29 54.31
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
VectorPart No. Fig.
Dimensions: in.Grid Description
Price EachWeight (W) Height (H) 1 10
574-8017 8017 B6 6.30 3.94 2mm x 2mm Pad Per Hole plated thru-holes 16.85 15.75574-8018 8018 B6 6.30 3.94 2mm and 0.100" Pad Per Hole and 2mm Combo 19.89 18.49574-8019 8019 B1 6.30 3.94 .100" x .100" 38 Tracks/63 Holes Per Track 20.81 20.40574-8021 8021 B6 6.30 3.94 .05" x .05" Pad Per Hole plated thru-holes 32.73 29.20
• Eurocard Size: 100mm x 160mm• 0.6mm hole diameter (Combo hole diameter 0.6mm and .042")
• 1.575mm thickness• Material: FR4 Epoxy glass
A
B
C
1
2
3
4
5
6
7
8
mouser.com/vector (800) 346-6873© Copyright 2015 Mouser Electronics© Copyright 2015 Mouser Electronics
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
VectorPart No. Fig.
Dimensions: in. 16 PinDIP Material Description Extender Recommended
Card CagePrice Each
W H 1 10574-3797-2 3797-2 C4 4.5 2.73 4 CEM-1 3-Hole Solder Pad 3690-10 CCK 12 Series 20.16 19.22
30 Contacts - .156" Spacing
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
VectorPart No. Fig.
Dimensions: in. 16 PinDIP Material Description Extender Recommended
Card CagePrice Each
W H 1 10574-3662-5 3662-5 C7 4.5 4.5 40 CEM-1 Plated Contacts Only 3690 CCK 13 Series 22.12 19.37574-4112-5 4112-5 C8 4.5 4.5 8 CEM-1 Zig-Zag Buses 3690 CCK 13 Series 28.71 27.71574-3662 3662 C5 6.5 4.5 50 CEM-1 Plated Contacts Only 3690 CCK 13 Series 25.12 23.78574-3677-2 3677-2 C4 6.5 4.5 12 CEM-1 3-Hole Solder Pad single-sided 3690 CCK 13 Series 26.57 26.11574-4112 4112 C4 9.6 4.5 40 FR4 3-Hole Solder Pad Zig-Zag Bus Pattern 3690-10 CCK 13 Series 38.85 36.05574-4112-4 4112-4 C8 6.5 4.5 25 CEM-1 3-Hole Solder Pad/Overall Ground Plane 3690 CCK 13 Series 31.46 29.73574-3677 3677 C4 9.6 4.5 21 CEM-1 3-Hole Solder Pad single-sided 3690 CCK 14 Series 32.10 29.58
44 Contacts - .156" Spacing
For quantities greater than listed, call for quote.
MOUSERSTOCK NO.
VectorPart No. Fig.
Dimensions: in. 16 PinDIP Material Description Extender Recommended
Card CagePrice Each
W H 1 10574-E160-3U-1 E160-3U-1 C6 6.3 3.94 35 FR4 Pad Per Hole - CCK160-3U 19.90 15.25574-4614 4614 C4 6.3 3.94 20 FR4 3-Hole Solder Pad - CCK160-3U 32.38 30.11574-4615 4615 C4 6.3 9.19 50 FR4 3-Hole Solder Pad - CCK160-3U 34.72 32.87
3Ux160mm, 6Ux160mm, and 9Ux280mm
