TOOLS NEWS B089A ; CVD Coated Grade for Steel Turning UE6110 · 2013. 8. 9. · 1 1 2 CVD Coated Grade for Steel Turning Features High Crater Wear Resistance High Flank Wear Resistance

TOOL NEWS

Series

Expansion

B089A2013.4 Update

CVD Coated Grade for Steel Turning

UE6110Excellent stability in wide range of applications!

1

1 2


Features

High Crater Wear Resistance High Flank Wear ResistanceThe gold Ti compound coating on the rake face exhibits exceptionally high crater wear resistance. This outer coating layer further enhances the crater wear resistance of the nano-texture Al2O3, making it suitable for high-speed, high performance machining.

Mitsubishi Materials unique, new coating technology consisting of nano-texture TiCN and Al2O3 offers a coating that has both high fracture and wear resistance.

An extremely smooth coating surface inhibits wear propagation during machining to achieve high quality surface fi nishes and prevents welding and chipping.

Special Ti compound layer Smooth surface

Nano-texture Al2O3 Nano-texture Al2O3

Nano-texture TiCN Nano-texture TiCN

Carbide substrate Carbide substrate

Coating structure of the rake face

Crater Wear Comparison Flank Wear Comparison

Coating structure of the fl ank face

The black coating on the fl ank face has an extremely smooth surface that prevents abnormal wear and weld chipping. Combined with the nano-texture coating improved surface finishes and stable tool life can be achieved.

Insert : CNMG432-MAWork piece : AISI 4340Cutting Conditions : Cutting speed 820 SFM, Feed .012 inch/rev, Depth of cut .059 inch, Dry cutting, Cutting time 7min

Insert : CNMG432oo

Work piece : AISI 5120Cutting Conditions : Cutting speed 655 SFM, Feed .012 inch/rev, Depth of cut .059 inch, Dry cutting, Cutting time 2min

With a Ti compound layer Smooth surface of UE6110Without a Ti compound layer Competitor's

Less crater wear Smooth, stable wearLarge crater wear Rough, uneven wear

Newly developed “Nano-texture coating” Newly developed “Black super-even coating”

Comparison of crystalline microstructureNano-texture coating Black super-even coatingConventional coating

Even on a nano-level grains are fi nely refi ned

Conventional coating

Comparison of coating surface

State-of-the-art coating featuring 2 in 1 technology

Superior machining performance achieved using 2 in 1 technology

UE6110

2 in 1 technology for stable cutting with high wear and fracture resistance

2

P01P10P20P30P40

UE610

5

UE611

0

MC6025

UE6020

UE6035

UH6400

M

LP .157.118.079.039

0 .004 .012 .02011°

.008

15°.004

M

MP .197.157.118.079.039

0 .004 .012 .020

15°

11°

.006

.008

M

RP .276

.197

.118

.0390 .004 .012 .020 .028

.013

3°.013

M

FP.118

.079

.039

0 .004 .008 .012 .0166°

6°

M

LP.118

.079

.039

0 .004 .008 .012 .016

18°

8°

M

MP .118

.079

.039

0 .004 .008 .012 .016

18°

18°

.004

.0047°5°

7°5°

7°5°

Application RangeUE6110 is the fi rst recommendation for steel turning.Suitable for machining mild, carbon, alloy, bearing and lead free steels.

Application Range

ISO Steel

Breaker system for steel cutting (Negative inserts)

App

licat

ion

Tole

ranc

e

Breaker Name and

PictureFeatures Cross Section

Geometry

Ligh

t Cut

ting First recommendation for light cutting of carbon steel

and alloy steelStable chip control in the light cutting range.The curved edge allows smooth chip discharge.

Med

ium

Cut

ting First recommendation for medium cutting of carbon steel

and alloy steelSuitable for medium to light cutting.Breaker geometry suitable for copying and back turning.Cutting edge geometry for an optimum balance of sharpness and fracture resistance.

Rou

gh C

uttin

g First recommendation for rough cutting of carbon steel and alloy steelFor interrupted cuts and removing scale.Good balance of cutting edge strength and low cutting resistance because of a suitable rake angle.

Carbon Steel • Alloy Steel

ap ( i

nch)

f (IPR)

Nose

Flank


ap ( i

nch)

f (IPR)

Nose

Flank


ap ( i

nch)

f (IPR)

Nose

Flank

Breaker system for steel cutting (Positive inserts)

App

licat

ion

Tole

ranc

e

Breaker Name and

PictureFeatures Cross Section

Geometry

Fini

sh C

uttin

g First recommendation for fi nish cutting of carbon steel and alloy steelThe peninsula at the tip of the breaker controls chips even at small depths of cut.Corner strength is maintained to prevent abnormal fracturing.

Ligh

t Cut

ting First recommendation for light cutting of carbon steel

and alloy steelExcellent cutting edge sharpness due to the large rake angle.Prevents chip welding of the insert to ensure good surface fi nishes.Optimized breaker provides a wide range of chip control.

Med

ium

Cut

ting First recommendation for medium cutting of carbon

steel and alloy steelThe fl at land produces excellent wear resistance and superior fracture resistance.The wide pocket reduces vibration and chip jamming and also prevents increases in cutting resistance even at high depths of cut.


ap ( i

nch)

f (IPR)

Nose

Flank

Nose

Flank

Nose

Flank



ap ( i

nch)

ap ( i

nch)

f (IPR)

f (IPR)

Positive Insert

Positive Insert

Positive Insert

FH

FH

FH

LP

LP

LP

MP

MP

MP

RP

RP

RP

HX

HX

HX

AP25N

MP3025

UE6110

UE6105

UE6110

MC6025

UE6105

UE6110

MC6025

UE6105

UE6110

MC6025

UE6110

UE6020

UH6400

FP MPLP

FP MPLP

FP MPLP

NX2525 NX2525

UE6110 UE6110

MC6025 MC6025

NX2525

UE6110

MC6025

R-R/L

R-R/L

R-R/L

NX2525

NX2525

UTi20T

NX2525NX2525

UE6110UE6110

UE6020UE6020

RR--RR//LLRNX252525 UEUE6161101061UEUE6161101061

3

P


CUTTING CONDITIONS

Stable CuttingContinuous CuttingConstant Depth of CutPre-MachinedSecurely Clamped Component Cutting

General Cutting

Unstable CuttingHeavy Interrupted CuttingIrregular Depth of CutLow Clamping Rigidity Cutting

Mild Steel • Carbon Steel • Alloy SteelNEGATIVE INSERTS

Optimum Selection of Insert

Finish Cutting Light Cutting Medium Cutting Rough Cutting Heavy Cutting

Finish Cutting Light Cutting Medium Cutting

Finish Cutting Medium CuttingFinish Cutting Medium Cutting

StandardStandard

StandardStandard

StandardStandard

Light Cutting

7° POSITIVE INSERTS with hole

11° POSITIVE INSERTS without hole

4

P FH 755─1280 .003─ .008 .008─ .039

LP 690─1165 .004─ .016 .012─ .079

SH 690─1165 .004─ .016 .012─ .079

SA 690─1165 .004─ .016 .012─ .079

SW 690─1165 .004─ .020 .012─ .098

MP 620─1065 .006─ .020 .012─ .157

MA 620─1065 .008─ .020 .012─ .157

MH 620─1065 .008─ .022 .039─ .157

Std 620─1065 .010─ .024 .059─ .197

MW 620─1065 .008─ .024 .035─ .157

RP 590─1015 .010─ .024 .059─ .236

GH 590─1015 .010─ .024 .059─ .236

HX 525─900 .020─ .050 .118─ .433

HV 440─740 .028─ .051 .157─ .472

HZ 525─900 .016─ .047 .079─ .394

P FP 820─1395 .002─ .008 .008─ .035

LP 820─1395 .002─ .010 .008─ .039

MP 670─1150 .003─ .012 .012─ .079

FP 605─1015 .002─ .008 .008─ .035

LP 605─1015 .002─ .010 .008─ .039

MP 490─850 .003─ .012 .012─ .079

MP 360─605 .003─ .012 .012─ .079

P 670─1150 .003─ .012 .012─ .079

490─850 .003─ .012 .012─ .079

Negative Inserts (External turning tools)

5°/7° Positive Inserts (HSKT TOOLS, SP Holder)

11° Positive Inserts (MC Holder)

Work Material Hardness Cutting Mode Breaker Cutting Speed (SFM)

Feed (IPR)

Depth of Cut (inch)

Carbon Steel, Alloy Steel (1045, 4140 etc.) 180─280HB

General Cutting Finish Cutting

General Cutting

Light CuttingGeneral Cutting

General Cutting

General Cutting

General Cutting

Medium Cutting

General Cutting

General Cutting

General Cutting

General Cutting

General CuttingRough Cutting

General Cutting

Stable Cutting

Heavy CuttingStable Cutting

General Cutting


Feed (IPR)

Depth of Cut (inch)

Mild Steel (ASTM A283, 1010 etc.) <180HB


General Cutting Light Cutting

General Cutting Medium Cutting

Carbon Steel, Alloy Steel (1045, 4140 etc.) 180─280HB


General Cutting Light Cutting

General Cutting Medium CuttingCarbon Steel, Alloy Steel

(AISI 4340 etc.) 280─350HB General Cutting Medium Cutting


Feed (IPR)

Depth of Cut (inch)

Mild Steel (ASTM A283, 1010 etc.) <180HB General Cutting Medium Cutting Standard

Carbon Steel, Alloy Steel (1045, 4140 etc.) 180─280HB General Cutting Medium Cutting Standard

Recommended Cutting Conditions

(Note 1) Recommended cutting conditions for 5º/7º/11º positive inserts are provided as a guideline only. (Note 2) Verify the recommended conditions for each boring bar as cutting conditions for internal machining will vary depending on the length

of overhang.(Note 3) Please use with reference to the recommended conditions of the boring bar in internal machining.

5

UE6110 D1 S1 Re D2

CNMG430.5FH CNMG120402-FH a .500 .187 .008 .203

S1D1

Re

80°

øD2 431FH 120404-FH a .500 .187 .016 .203

432FH 120408-FH a .500 .187 .031 .203

CNMG431LP CNMG120404-LP a .500 .187 .016 .203

D1

Re

80° S1

øD2 432LP 120408-LP a .500 .187 .031 .203

433LP 120412-LP a .500 .187 .047 .203

CNMG32.51SH CNMG09T304-SH s .375 .156 .016 .150

80° S1D1

Re

øD2 32.52SH 09T308-SH s .375 .156 .031 .150

431SH 120404-SH a .500 .187 .016 .203 432SH 120408-SH a .500 .187 .031 .203 433SH 120412-SH a .500 .187 .047 .203

CNMG431SA CNMG120404-SA a .500 .187 .016 .203

S180°

Re

D1

øD2 432SA 120408-SA a .500 .187 .031 .203

433SA 120412-SA a .500 .187 .047 .203

CNMG431SW CNMG120404-SW a .500 .187 .016 .203

80° S1

Re

D1øD

2 432SW 120408-SW a .500 .187 .031 .203 433SW 120412-SW a .500 .187 .047 .203

CNMG431MP CNMG120404-MP a .500 .187 .016 .203

80° S1D1

Re

øD2 432MP 120408-MP a .500 .187 .031 .203

433MP 120412-MP a .500 .187 .047 .203 434MP 120416-MP a .500 .187 .063 .203 542MP 160608-MP a .625 .250 .031 .250 543MP 160612-MP a .625 .250 .047 .250 544MP 160616-MP a .625 .250 .063 .250CNMG431MA CNMG120404-MA a .500 .187 .016 .203

Re

D180° S1

øD2

432MA 120408-MA a .500 .187 .031 .203 433MA 120412-MA a .500 .187 .047 .203 434MA 120416-MA a .500 .187 .063 .203 542MA 160608-MA a .625 .250 .031 .250 543MA 160612-MA a .625 .250 .047 .250 544MA 160616-MA a .625 .250 .063 .250 643MA 190612-MA a .750 .250 .047 .312 644MA 190616-MA a .750 .250 .063 .312


a : Inventory maintained. s : Inventory maintained in Japan.

UE6110INSERTS

a Negative Inserts (With hole)

Shape Order Number (ISO) Number

Stock Dimensions (inch)

Geometry

FH

Finish Cutting

LP

Light Cutting

SH

Light Cutting

SA

Light Cutting

SW

Light Cutting(Wiper)

MP

Medium Cutting

MA

Medium Cutting

6

UE6110 D1 S1 Re D2

CNMG431MH CNMG120404-MH a .500 .187 .016 .203

S1

Re

D180°

øD2

432MH 120408-MH a .500 .187 .031 .203 433MH 120412-MH a .500 .187 .047 .203 434MH 120416-MH a .500 .187 .063 .203 542MH 160608-MH s .625 .250 .031 .250 543MH 160612-MH a .625 .250 .047 .250 544MH 160616-MH s .625 .250 .063 .250 643MH 190612-MH a .750 .250 .047 .312 644MH 190616-MH a .750 .250 .063 .312CNMG322 CNMG090308 a .375 .125 .031 .150

D1 S1

Re

80°

øD2

32.51 09T304 s .375 .156 .016 .150 32.52 09T308 s .375 .156 .031 .150 431 120404 a .500 .187 .016 .203 432 120408 a .500 .187 .031 .203 433 120412 a .500 .187 .047 .203 434 120416 a .500 .187 .063 .203 542 160608 a .625 .250 .031 .250 543 160612 a .625 .250 .047 .250 544 160616 a .625 .250 .063 .250 642 190608 a .750 .250 .031 .312 643 190612 a .750 .250 .047 .312 644 190616 a .750 .250 .063 .312CNMG432MW CNMG120408-MW a .500 .187 .031 .203 Re

D1 S180°

øD2

433MW 120412-MW a .500 .187 .047 .203

CNMG322MS CNMG090308-MS a .375 .125 .031 .150

S1

Re

D180°

øD2 32.52MS 09T308-MS s .375 .156 .031 .150

431MS 120404-MS a .500 .187 .016 .203 432MS 120408-MS a .500 .187 .031 .203 433MS 120412-MS a .500 .187 .047 .203

CNMG432RP CNMG120408-RP a .500 .187 .031 .203

80° S1D1

Re

øD2 433RP 120412-RP a .500 .187 .047 .203

434RP 120416-RP a .500 .187 .063 .203 543RP 160612-RP a .625 .250 .047 .250 544RP 160616-RP a .625 .250 .063 .250 643RP 190612-RP a .750 .250 .047 .312 644RP 190616-RP a .750 .250 .063 .312CNMG432GH CNMG120408-GH a .500 .187 .031 .203

D1 S1

Re

80°

øD2

433GH 120412-GH a .500 .187 .047 .203 434GH 120416-GH s .500 .187 .063 .203 543GH 160612-GH a .625 .250 .047 .250 544GH 160616-GH a .625 .250 .063 .250 643GH 190612-GH a .750 .250 .047 .312 644GH 190616-GH a .750 .250 .063 .312



Geometry

MH

Medium Cutting

Standard

Medium Cutting

MW

Medium Cutting(Wiper)

MS

Medium Cutting

RP

Rough Cutting

GH

Rough Cutting

7

UE6110 D1 S1 Re D2

CNMM432HZ CNMM120408-HZ a .500 .187 .031 .203

S1

Re

D180°

øD2 433HZ 120412-HZ a .500 .187 .047 .203

543HZ 160612-HZ a .625 .250 .047 .250 544HZ 160616-HZ a .625 .250 .063 .250 643HZ 190612-HZ a .750 .250 .047 .312 644HZ 190616-HZ a .750 .250 .063 .312CNMM643HX CNMM190612-HX a .750 .250 .047 .312

S1D180°

Re

øD2 644HX 190616-HX a .750 .250 .063 .312

646HX 190624-HX a .750 .250 .094 .312 866HX 250924-HX a 1.000 .375 .094 .359

CNMM644HV CNMM190616-HV a .750 .250 .063 .312

D1 S180°

Re

øD2 646HV 190624-HV a .750 .250 .094 .312

866HV 250924-HV a 1.000 .375 .094 .359

DNMG430.5FH DNMG150402-FH a .500 .187 .008 .203

D155°

Re

S1

øD2 431FH 150404-FH a .500 .187 .016 .203

432FH 150408-FH a .500 .187 .031 .203 440.5FH 150602-FH a .500 .250 .008 .203 441FH 150604-FH s .500 .250 .016 .203 442FH 150608-FH s .500 .250 .031 .203DNMG331LP DNMG110404-LP a .375 .187 .016 .150

S1D155°

Re

øD2

332LP 110408-LP a .375 .187 .031 .150 431LP 150404-LP a .500 .187 .016 .203 432LP 150408-LP a .500 .187 .031 .203 433LP 150412-LP a .500 .187 .047 .203 441LP 150604-LP s .500 .250 .016 .203 442LP 150608-LP s .500 .250 .031 .203 443LP 150612-LP a .500 .250 .047 .203DNMG331SH DNMG110404-SH a .375 .187 .016 .150

S1D155°

Re

øD2

332SH 110408-SH a .375 .187 .031 .150 431SH 150404-SH a .500 .187 .016 .203 432SH 150408-SH a .500 .187 .031 .203 433SH 150412-SH a .500 .187 .047 .203 441SH 150604-SH s .500 .250 .016 .203 442SH 150608-SH s .500 .250 .031 .203 443SH 150612-SH s .500 .250 .047 .203DNMG431SA DNMG150404-SA a .500 .187 .016 .203

S155° D1

Re

øD2 432SA 150408-SA a .500 .187 .031 .203

433SA 150412-SA a .500 .187 .047 .203 441SA 150604-SA s .500 .250 .016 .203 442SA 150608-SA s .500 .250 .031 .203 443SA 150612-SA s .500 .250 .047 .203



UE6110INSERTS




Geometry

HZ

Heavy Cutting

HX

Heavy Cutting

HV

Heavy Cutting

FH

Finish Cutting

LP

Light Cutting

SH

Light Cutting

SA

Light Cutting

8

UE6110 D1 S1 Re D2

DNMX431SW DNMX150404-SW a .500 .187 .016 .203

øD2

D155° S1

Re 432SW 150408-SW a .500 .187 .031 .203 433SW 150412-SW a .500 .187 .047 .203 441SW 150604-SW a .500 .250 .016 .203 442SW 150608-SW a .500 .250 .031 .203 443SW 150612-SW a .500 .250 .047 .203DNMG431MP DNMG150404-MP a .500 .187 .016 .203

S155° D1

Re

øD2

432MP 150408-MP a .500 .187 .031 .203 433MP 150412-MP a .500 .187 .047 .203 434MP 150416-MP a .500 .187 .063 .203 441MP 150604-MP s .500 .250 .016 .203 442MP 150608-MP s .500 .250 .031 .203 443MP 150612-MP s .500 .250 .047 .203 444MP 150616-MP s .500 .250 .063 .203DNMG331MA DNMG110404-MA a .375 .187 .016 .150

S1D1

Re

55°

øD2

332MA 110408-MA a .375 .187 .031 .150 333MA 110412-MA s .375 .187 .047 .150 431MA 150404-MA a .500 .187 .016 .203 432MA 150408-MA a .500 .187 .031 .203 433MA 150412-MA a .500 .187 .047 .203 441MA 150604-MA a .500 .250 .016 .203 442MA 150608-MA a .500 .250 .031 .203 443MA 150612-MA a .500 .250 .047 .203 444MA 150616-MA s .500 .250 .063 .203DNMG431MH DNMG150404-MH a .500 .187 .016 .203

D1 S155°

ReRe

øD2 432MH 150408-MH a .500 .187 .031 .203

433MH 150412-MH a .500 .187 .047 .203 441MH 150604-MH s .500 .250 .016 .203 442MH 150608-MH s .500 .250 .031 .203 443MH 150612-MH s .500 .250 .047 .203DNMG332 DNMG110408 a .375 .187 .031 .150

øD2

D1 S155°

Re

431 150404 a .500 .187 .016 .203 432 150408 a .500 .187 .031 .203 433 150412 a .500 .187 .047 .203 434 150416 a .500 .187 .063 .203 441 150604 s .500 .250 .016 .203 442 150608 a .500 .250 .031 .203 443 150612 s .500 .250 .047 .203 444 150616 a .500 .250 .063 .203DNMX432MW DNMX150408-MW a .500 .187 .031 .203

Re

D155° S1

øD2 433MW 150412-MW a .500 .187 .047 .203

442MW 150608-MW a .500 .250 .031 .203 443MW 150612-MW a .500 .250 .047 .203



Geometry

SW


MP

Medium Cutting

MA

Medium Cutting

MH

Medium Cutting

Standard

Medium Cutting

MW


9

UE6110 D1 S1 Re D2

DNMG332MS DNMG110408-MS a .375 .187 .031 .150

S155° D1

ReRe

øD2 431MS 150404-MS a .500 .187 .016 .203

432MS 150408-MS a .500 .187 .031 .203 433MS 150412-MS s .500 .187 .047 .203 441MS 150604-MS s .500 .250 .016 .203 442MS 150608-MS s .500 .250 .031 .203 443MS 150612-MS s .500 .250 .047 .203DNMG432RP DNMG150408-RP a .500 .187 .031 .203

S1D1

Re

55°

øD2 433RP 150412-RP a .500 .187 .047 .203

434RP 150416-RP a .500 .187 .063 .203 442RP 150608-RP a .500 .250 .031 .203 443RP 150612-RP a .500 .250 .047 .203 444RP 150616-RP a .500 .250 .063 .203DNMG432GH DNMG150408-GH a .500 .187 .031 .203

55° D1 S1

Re

øD2 433GH 150412-GH a .500 .187 .047 .203

442GH 150608-GH a .500 .250 .031 .203 443GH 150612-GH a .500 .250 .047 .203

DNMM432HZ DNMM150408-HZ a .500 .187 .031 .203

55° S1D1

Re

øD2 433HZ 150412-HZ a .500 .187 .047 .203

442HZ 150608-HZ a .500 .250 .031 .203 443HZ 150612-HZ a .500 .250 .047 .203

RNMG43 RNMG120400 a .500 .187 ─ .203

D1 S1øD

2

SNMG431FH SNMG120404-FH s .500 .187 .016 .203

øD2

D1 S1

Re 432FH 120408-FH a .500 .187 .031 .203

SNMG431LP SNMG120404-LP a .500 .187 .016 .203

S1D1

Re

øD2

432LP 120408-LP a .500 .187 .031 .203 433LP 120412-LP a .500 .187 .047 .203

SNMG431SH SNMG120404-SH s .500 .187 .016 .203 Re

D1 S1

øD2

432SH 120408-SH a .500 .187 .031 .203 433SH 120412-SH s .500 .187 .047 .203



UE6110INSERTS




Geometry

MS

Medium Cutting

RP

Rough Cutting

GH

Rough Cutting

HZ

Heavy Cutting

Standard

Medium Cutting

FH

Finish Cutting

LP

Light Cutting

SH

Light Cutting

10

UE6110 D1 S1 Re D2

SNMG431SA SNMG120404-SA a .500 .187 .016 .203

S1

Re

D1

øD2

432SA 120408-SA a .500 .187 .031 .203 433SA 120412-SA a .500 .187 .047 .203

SNMG431MP SNMG120404-MP a .500 .187 .016 .203

S1D1

øD2Re

432MP 120408-MP a .500 .187 .031 .203 433MP 120412-MP a .500 .187 .047 .203

SNMG431MA SNMG120404-MA a .500 .187 .016 .203

S1

Re

D1

øD2

432MA 120408-MA a .500 .187 .031 .203 433MA 120412-MA a .500 .187 .047 .203 542MA 150608-MA a .625 .250 .031 .250 543MA 150612-MA s .625 .250 .047 .250 544MA 150616-MA s .625 .250 .063 .250 643MA 190612-MA a .750 .250 .047 .312 644MA 190616-MA a .750 .250 .063 .312SNMG432MH SNMG120408-MH a .500 .187 .031 .203

S1

Re

D1

øD2

433MH 120412-MH a .500 .187 .047 .203 643MH 190612-MH a .750 .250 .047 .312 644MH 190616-MH a .750 .250 .063 .312

SNMG321 SNMG090304 a .375 .125 .016 .150

Re

D1 S1

øD2

322 090308 a .375 .125 .031 .150 431 120404 a .500 .187 .016 .203 432 120408 a .500 .187 .031 .203 433 120412 a .500 .187 .047 .203 434 120416 a .500 .187 .063 .203 543 150612 a .625 .250 .047 .250 643 190612 a .750 .250 .047 .312 644 190616 a .750 .250 .063 .312SNMG431MS SNMG120404-MS s .500 .187 .016 .203

S1D1

Re

øD2 432MS 120408-MS a .500 .187 .031 .203

433MS 120412-MS s .500 .187 .047 .203

SNMG432RP SNMG120408-RP a .500 .187 .031 .203

D1

Re

S1

øD2 433RP 120412-RP a .500 .187 .047 .203

434RP 120416-RP a .500 .187 .063 .203 543RP 150612-RP a .625 .250 .047 .250 544RP 150616-RP a .625 .250 .063 .250 643RP 190612-RP a .750 .250 .047 .312 644RP 190616-RP a .750 .250 .063 .312



Geometry

SA

Light Cutting

MP

Medium Cutting

MA

Medium Cutting

MH

Medium Cutting

Standard

Medium Cutting

MS

Medium Cutting

RP

Rough Cutting

11

UE6110 D1 S1 Re D2

SNMG432GH SNMG120408-GH a .500 .187 .031 .203Re

D1 S1

øD2 433GH 120412-GH a .500 .187 .047 .203

434GH 120416-GH a .500 .187 .063 .203 543GH 150612-GH a .625 .250 .047 .250 544GH 150616-GH a .625 .250 .063 .250 643GH 190612-GH a .750 .250 .047 .312 644GH 190616-GH a .750 .250 .063 .312SNMM432HZ SNMM120408-HZ a .500 .187 .031 .203

S1

Re

D1

øD2

433HZ 120412-HZ a .500 .187 .047 .203 543HZ 150612-HZ a .625 .250 .047 .250 643HZ 190612-HZ a .750 .250 .047 .312 644HZ 190616-HZ a .750 .250 .063 .312SNMM643HX SNMM190612-HX a .750 .250 .047 .312

øD2

S1

Re

D1

644HX 190616-HX a .750 .250 .063 .312 646HX 190624-HX a .750 .250 .094 .312 856HX 250724-HX a 1.000 .313 .094 .359 866HX 250924-HX a 1.000 .375 .094 .359SNMM644HV SNMM190616-HV a .750 .250 .063 .312

øD2Re

D1 S1

646HV 190624-HV a .750 .250 .094 .312 856HV 250724-HV a 1.000 .313 .094 .359 866HV 250924-HV a 1.000 .375 .094 .359

TNMG330.5FH TNMG160402-FH a .375 .187 .008 .150

øD2

S1D1

Re 331FH 160404-FH a .375 .187 .016 .150 332FH 160408-FH a .375 .187 .031 .150

TNMG331LP TNMG160404-LP a .375 .187 .016 .150

D1

Re

S1

øD2 332LP 160408-LP a .375 .187 .031 .150

333LP 160412-LP a .375 .187 .047 .150 432LP 220408-LP a .500 .187 .031 .203 433LP 220412-LP a .500 .187 .047 .203

TNMG331SH TNMG160404-SH a .375 .187 .016 .150

S1D1

Re

øD2 332SH 160408-SH a .375 .187 .031 .150

432SH 220408-SH a .500 .187 .031 .203

TNMG331SA TNMG160404-SA a .375 .187 .016 .150

S1

Re

D1

øD2 332SA 160408-SA a .375 .187 .031 .150

333SA 160412-SA a .375 .187 .047 .150 432SA 220408-SA a .500 .187 .031 .203 433SA 220412-SA a .500 .187 .047 .203


UE6110INSERTS




Geometry

GH

Rough Cutting

HZ

Heavy Cutting

HX

Heavy Cutting

HV

Heavy Cutting

FH

Finish Cutting

LP

Light Cutting

SH

Light Cutting

SA

Light Cutting

a : Inventory maintained.

12

UE6110 D1 S1 Re D2

TNMX331SW TNMX160404-SW a .375 .187 .016 .150

S1D1

Re

øD2 332SW 160408-SW a .375 .187 .031 .150

TNMG331MP TNMG160404-MP a .375 .187 .016 .150Re

S1D1

øD2 332MP 160408-MP a .375 .187 .031 .150

333MP 160412-MP a .375 .187 .047 .150 432MP 220408-MP a .500 .187 .031 .203 433MP 220412-MP a .500 .187 .047 .203

TNMG331MA TNMG160404-MA a .375 .187 .016 .150Re

S1D1

øD2

øD2

332MA 160408-MA a .375 .187 .031 .150 333MA 160412-MA a .375 .187 .047 .150 432MA 220408-MA a .500 .187 .031 .203 433MA 220412-MA a .500 .187 .047 .203 542MA 270608-MA a .625 .250 .031 .250 543MA 270612-MA a .625 .250 .047 .250TNMG331MH TNMG160404-MH a .375 .187 .016 .150

Re

D1 S1

øD2 332MH 160408-MH a .375 .187 .031 .150

333MH 160412-MH a .375 .187 .047 .150 432MH 220408-MH a .500 .187 .031 .203 433MH 220412-MH a .500 .187 .047 .203

TNMG221 TNMG110304 a .250 .125 .016 .089

S1

Re

D1

øD2

222 110308 a .250 .125 .031 .089 321 160304 a .375 .125 .016 .150 322 160308 a .375 .125 .031 .150 331 160404 a .375 .187 .016 .150 332 160408 a .375 .187 .031 .150 333 160412 a .375 .187 .047 .150 334 160416 a .375 .187 .063 .150 431 220404 a .500 .187 .016 .203 432 220408 a .500 .187 .031 .203 433 220412 a .500 .187 .047 .203 434 220416 a .500 .187 .063 .203 542 270608 a .625 .250 .031 .250 543 270612 a .625 .250 .047 .250 544 270616 a .625 .250 .063 .250TNMX332MW TNMX160408-MW a .375 .187 .031 .150

Re

S1D1

øD2 333MW 160412-MW a .375 .187 .047 .150



Geometry

SW


MP

Medium Cutting

MA

Medium Cutting

MH

Medium Cutting

Standard

Medium Cutting

MW


13

UE6110 D1 S1 Re D2

TNMG331MS TNMG160404-MS a .375 .187 .016 .150

øD2

Re

D1 S1

332MS 160408-MS a .375 .187 .031 .150 333MS 160412-MS s .375 .187 .047 .150 432MS 220408-MS a .500 .187 .031 .203

TNMG332RP TNMG160408-RP a .375 .187 .031 .150

S1D1

Re

øD2

333RP 160412-RP a .375 .187 .047 .150 432RP 220408-RP a .500 .187 .031 .203 433RP 220412-RP a .500 .187 .047 .203 434RP 220416-RP a .500 .187 .063 .203 543RP 270612-RP a .625 .250 .047 .250 544RP 270616-RP a .625 .250 .063 .250TNMG332GH TNMG160408-GH a .375 .187 .031 .150

Re

D1 S1

øD2

333GH 160412-GH s .375 .187 .047 .150 432GH 220408-GH a .500 .187 .031 .203 433GH 220412-GH a .500 .187 .047 .203 434GH 220416-GH a .500 .187 .063 .203 543GH 270612-GH a .625 .250 .047 .250 544GH 270616-GH a .625 .250 .063 .250TNMM332HZ TNMM160408-HZ s .375 .187 .031 .150

øD2

S1

Re

D1

432HZ 220408-HZ a .500 .187 .031 .203 433HZ 220412-HZ a .500 .187 .047 .203 434HZ 220416-HZ a .500 .187 .063 .203

VNMG330.5FH VNMG160402-FH a .375 .187 .008 .150

øD2

D1

Re

S135°

331FH 160404-FH s .375 .187 .016 .150 332FH 160408-FH s .375 .187 .031 .150

VNMG331LP VNMG160404-LP a .375 .187 .016 .150

S1D135°

Re

øD2

332LP 160408-LP a .375 .187 .031 .150

VNMG331SH VNMG160404-SH s .375 .187 .016 .150

D1

Re

S1

35°

øD2

332SH 160408-SH s .375 .187 .031 .150

VNMG331MP VNMG160404-MP a .375 .187 .016 .150

S1

Re

D135°

øD2

332MP 160408-MP a .375 .187 .031 .150 333MP 160412-MP a .375 .187 .047 .150



UE6110INSERTS




Geometry

MS

Medium Cutting

RP

Rough Cutting

GH

Rough Cutting

HZ

Heavy Cutting

FH

Finish Cutting

LP

Light Cutting

SH

Light Cutting

MP

Medium Cutting

14

UE6110 D1 S1 Re D2

VNMG331MA VNMG160404-MA a .375 .187 .016 .150

D1 S135°

Re

øD2

332MA 160408-MA a .375 .187 .031 .150

VNMG331MH VNMG160404-MH a .375 .187 .016 .150

D1 S1

35°

Re

øD2

332MH 160408-MH a .375 .187 .031 .150

VNMG331 VNMG160404 a .375 .187 .016 .150

D1 S1

Re

35°

øD2

332 160408 a .375 .187 .031 .150 333 160412 a .375 .187 .047 .150

VNMG331MS VNMG160404-MS a .375 .187 .016 .150

øD2

Re

D1 S135°

332MS 160408-MS a .375 .187 .031 .150

WNMG431FH WNMG080404-FH a .500 .187 .016 .203

øD2

S1

80°

D1Re

432FH 080408-FH a .500 .187 .031 .203

WNMG32.51LP WNMG06T304-LP a .375 .156 .016 .150

S1

80°

D1Re

øD2

32.52LP 06T308-LP a .375 .156 .031 .150 331LP 060404-LP a .375 .187 .016 .150 332LP 060408-LP a .375 .187 .031 .150 431LP 080404-LP a .500 .187 .016 .203 432LP 080408-LP a .500 .187 .031 .203 433LP 080412-LP a .500 .187 .047 .203WNMG32.51SH WNMG06T304-SH a .375 .156 .016 .150

S1D1Re

80°

øD2

32.52SH 06T308-SH a .375 .156 .031 .150 331SH 060404-SH a .375 .187 .016 .150 332SH 060408-SH a .375 .187 .031 .150 431SH 080404-SH a .500 .187 .016 .203 432SH 080408-SH a .500 .187 .031 .203 433SH 080412-SH a .500 .187 .047 .203WNMG431SA WNMG080404-SA a .500 .187 .016 .203

S1D1Re

80°

øD2

432SA 080408-SA a .500 .187 .031 .203 433SA 080412-SA a .500 .187 .047 .203



Geometry

MA

Medium Cutting

MH

Medium Cutting

Standard

Medium Cutting

MS

Medium Cutting

FH

Finish Cutting

LP

Light Cutting

SH

Light Cutting

SA

Light Cutting

15

UE6110 D1 S1 Re D2

WNMG331SW WNMG060404-SW a .375 .187 .016 .150

S1

80°

D1Re

øD2

332SW 060408-SW a .375 .187 .031 .150 431SW 080404-SW a .500 .187 .016 .203 432SW 080408-SW a .500 .187 .031 .203 433SW 080412-SW a .500 .187 .047 .203

WNMG32.51MP WNMG06T304-MP a .375 .156 .016 .150

Re

80°

S1D1

øD2

32.52MP 06T308-MP a .375 .156 .031 .150 32.53MP 06T312-MP a .375 .156 .047 .150 331MP 060404-MP a .375 .187 .016 .150 332MP 060408-MP a .375 .187 .031 .150 333MP 060412-MP a .375 .187 .047 .150 431MP 080404-MP a .500 .187 .016 .203 432MP 080408-MP a .500 .187 .031 .203 433MP 080412-MP a .500 .187 .047 .203 434MP 080416-MP a .500 .187 .063 .203WNMG32.51MA WNMG06T304-MA a .375 .156 .016 .150

S1D1Re

80°

øD2

32.52MA 06T308-MA a .375 .156 .031 .150 32.53MA 06T312-MA a .375 .156 .047 .150 331MA 060404-MA s .375 .187 .016 .150 332MA 060408-MA s .375 .187 .031 .150 333MA 060412-MA a .375 .187 .047 .150 431MA 080404-MA a .500 .187 .016 .203 432MA 080408-MA a .500 .187 .031 .203 433MA 080412-MA a .500 .187 .047 .203 434MA 080416-MA s .500 .187 .063 .203WNMG431MH WNMG080404-MH a .500 .187 .016 .203

S1D1Re

80°

øD2

432MH 080408-MH a .500 .187 .031 .203 433MH 080412-MH a .500 .187 .047 .203

WNMG431 WNMG080404 a .500 .187 .016 .203

D1 S1Re

80°

øD2

432 080408 a .500 .187 .031 .203 433 080412 a .500 .187 .047 .203

WNMG332MW WNMG060408-MW a .375 .187 .031 .150 80°

D1 S1Re

øD2

333MW 060412-MW s .375 .187 .047 .150 432MW 080408-MW a .500 .187 .031 .203 433MW 080412-MW a .500 .187 .047 .203



UE6110INSERTS




Geometry

SW


MP

Medium Cutting

MA

Medium Cutting

MH

Medium Cutting

Standard

Medium Cutting

MW


16

UE6110 D1 S1 Re D2

VBMT220.5FP VBMT110302-FP a .250 .125 .008 .114Re

øD2

5°S1

35° D1

221FP 110304-FP a .250 .125 .016 .114 222FP 110308-FP a .250 .125 .031 .114 331FP 160404-FP a .375 .187 .016 .173 332FP 160408-FP a .375 .187 .031 .173VBMT221LP VBMT110304-LP a .250 .125 .016 .114

D1

Re

øD2

7°S1

35°


VBMT331MP VBMT160404-MP a .375 .187 .016 .173

øD2

5°S1

35° D1

Re 332MP 160408-MP a .375 .187 .031 .173

VBMT331 VBMT160404 a .375 .187 .016 .174

S1

Re

35° D1

øD2

5°

332 160408 a .375 .187 .031 .174

UE6110 D1 S1 Re D2

WNMG32.51MS WNMG06T304-MS a .375 .156 .016 .150

øD2

S1D1Re

80° 32.52MS 06T308-MS a .375 .156 .031 .150 331MS 060404-MS a .375 .187 .016 .150 332MS 060408-MS a .375 .187 .031 .150 431MS 080404-MS a .500 .187 .016 .203 432MS 080408-MS a .500 .187 .031 .203 433MS 080412-MS s .500 .187 .047 .203WNMG432RP WNMG080408-RP a .500 .187 .031 .203 80°

D1 S1Re

øD2

433RP 080412-RP a .500 .187 .047 .203

WNMG432GH WNMG080408-GH a .500 .187 .031 .203

D1 S1Re

80°

øD2

433GH 080412-GH a .500 .187 .047 .203

Shape Order Number

Stock Dimensions (mm)

Geometry

FP

Finish Cutting

LP

Light Cutting

MP

Medium Cutting

Standard

Medium Cutting

a 5° Positive inserts (With hole)



Geometry

MS

Medium Cutting

RP

Rough Cutting

GH

Rough Cutting

17

UE6110 D1 S1 Re D2

CCMT21.50.5FP CCMT060202-FP a .250 .094 .008 .110

S1

Re

80° D17°

øD2

21.51FP 060204-FP a .250 .094 .016 .110 32.50.5FP 09T302-FP a .375 .156 .008 .173 32.51FP 09T304-FP a .375 .156 .016 .173 32.52FP 09T308-FP a .375 .156 .031 .173CCMT21.51LP CCMT060204-LP a .250 .094 .016 .110 Re

80° D1

øD2

7°S1

21.52LP 060208-LP a .250 .094 .031 .110 32.51LP 09T304-LP a .375 .156 .016 .173 32.52LP 09T308-LP a .375 .156 .031 .173

CCMT21.50.5SW CCMT060202-SW a .250 .094 .008 .110

7°

80° D1

Re

S1

øD2

21.51SW 060204-SW a .250 .094 .016 .110 32.50.5SW 09T302-SW a .375 .156 .008 .173 32.51SW 09T304-SW a .375 .156 .016 .173

CCMT21.51MP CCMT060204-MP a .250 .094 .016 .110

Re

80° D1

øD2

7°S1

21.52MP 060208-MP a .250 .094 .031 .110 32.51MP 09T304-MP a .375 .156 .016 .173 32.52MP 09T308-MP a .375 .156 .031 .173 431MP 120404-MP a .500 .187 .016 .217 432MP 120408-MP a .500 .187 .031 .217 433MP 120412-MP a .500 .187 .047 .217CCMT21.50.5 CCMT060202 a .250 .094 .008 .110

S1D180°

Re

7°øD

2

21.51 060204 a .250 .094 .016 .110 21.52 060208 a .250 .094 .031 .110 2.520.5 080302 s .313 .125 .008 .134 2.521 080304 s .313 .125 .016 .134 2.522 080308 s .313 .125 .031 .134 32.50.5 09T302 a .375 .156 .008 .173 32.51 09T304 a .375 .156 .016 .173 32.52 09T308 a .375 .156 .031 .173 431 120404 a .500 .187 .016 .217 432 120408 a .500 .187 .031 .217 433 120412 a .500 .187 .047 .217CCMT21.52MW CCMT060208-MW a .250 .094 .031 .110

7°

80° D1

Re

S1

øD2

32.51MW 09T304-MW a .375 .156 .016 .173 32.52MW 09T308-MW a .375 .156 .031 .173 431MW 120404-MW a .500 .187 .016 .217 432MW 120408-MW a .500 .187 .031 .217

DCMT21.50.5FP DCMT070202-FP a .250 .094 .008 .110

S1

øD2

55° D17°

Re 21.51FP 070204-FP a .250 .094 .016 .110 32.50.5FP 11T302-FP a .375 .156 .008 .173 32.51FP 11T304-FP a .375 .156 .016 .173 32.52FP 11T308-FP a .375 .156 .031 .173



UE6110INSERTS




Geometry

FP

Finish Cutting

LP

Light Cutting

SW


MP

Medium Cutting

Standard

Medium Cutting

MW


FP

Finish Cutting

18

UE6110 D1 S1 Re D2

DCMT21.50.5FV DCMT070202-FV s .250 .094 .008 .110

S1

øD2

55° D1

Re

7°

21.51FV 070204-FV s .250 .094 .016 .110 32.51FV 11T304-FV s .375 .156 .016 .173 32.52FV 11T308-FV s .375 .156 .031 .173

DCMT21.51LP DCMT070204-LP a .250 .094 .016 .110

øD2

55° D17°

Re

S1

21.52LP 070208-LP a .250 .094 .031 .110 32.51LP 11T304-LP a .375 .156 .016 .173 32.52LP 11T308-LP a .375 .156 .031 .173

DCMT21.51SV DCMT070204-SV s .250 .094 .016 .110

S155° D1

7°

Re

øD2 21.52SV 070208-SV s .250 .094 .031 .110

32.50.5SV 11T302-SV s .375 .156 .008 .173 32.51SV 11T304-SV s .375 .156 .016 .173 32.52SV 11T308-SV s .375 .156 .031 .173

DCMT21.51MP DCMT070204-MP a .250 .094 .016 .110

øD2

55° D17°

Re

S1

21.52MP 070208-MP a .250 .094 .031 .110 32.51MP 11T304-MP a .375 .156 .016 .173 32.52MP 11T308-MP a .375 .156 .031 .173 431MP 150404-MP a .500 .187 .016 .217 432MP 150408-MP a .500 .187 .031 .217DCMT21.50.5 DCMT070202 a .250 .094 .008 .110

S155° D1

7°

Re

øD2

21.51 070204 a .250 .094 .016 .110 21.52 070208 s .250 .094 .031 .110 32.50.5 11T302 a .375 .156 .008 .173 32.51 11T304 a .375 .156 .016 .173 32.52 11T308 a .375 .156 .031 .173 32.53 11T312 s .375 .156 .047 .173 431 150404 a .500 .187 .016 .217 432 150408 a .500 .187 .031 .217 433 150412 s .500 .187 .047 .217DCMT21.50.5MV DCMT070202-MV s .250 .094 .008 .110

S155° D1

Re

øD2

7°

21.51MV 070204-MV s .250 .094 .016 .110 21.52MV 070208-MV s .250 .094 .031 .110 32.50.5MV 11T302-MV s .375 .156 .008 .173 32.51MV 11T304-MV s .375 .156 .016 .173 32.52MV 11T308-MV s .375 .156 .031 .173RCMT0602M0 RCMT0602M0 a .236 .094 ─ .110

D1 S1

øD2

7°

0803M0 0803M0 a .315 .125 ─ .134



Geometry

FV

Finish Cutting

LP

Light Cutting

SV

Light Cutting

MP

Medium Cutting

Standard

Medium Cutting

MV

Medium Cutting

Standard

Medium Cutting

19

UE6110 D1 S1 Re D2

RCMX1003M0 RCMX1003M0 a .394 .125 ─ .142

D1 S1

øD2

7°

1204M0 1204M0 a .472 .187 ─ .165 1606M0 1606M0 a .630 .250 ─ .205 2006M0 2006M0 a .787 .250 ─ .256 2507M0 2507M0 s .984 .313 ─ .283 3209M0 3209M0 s 1.260 .375 ─ .374RCMX1606M0-RR RCMX1606M0-RR s .630 .250 ─ .205

S1

øD2

7°D1

2006M0-RR 2006M0-RR s .787 .250 ─ .256 2507M0-RR 2507M0-RR s .984 .313 ─ .283 3209M0-RR 3209M0-RR s 1.260 .375 ─ .374

SCMT32.51FP SCMT09T304-FP a .375 .156 .016 .173

S1D1

Re

7°

øD2

32.52FP 09T308-FP a .375 .156 .031 .173

SCMT32.51LP SCMT09T304-LP a .375 .156 .016 .173

D1

Re

S1

7°

øD2

32.52LP 09T308-LP a .375 .156 .031 .173

SCMT32.51MP SCMT09T304-MP a .375 .156 .016 .173

D1

Re

S1

7°

øD2

32.52MP 09T308-MP a .375 .156 .031 .173 431MP 120404-MP a .500 .187 .016 .217 432MP 120408-MP a .500 .187 .031 .217

SCMT32.51 SCMT09T304 a .375 .156 .016 .173

S1D1

Re

7°

øD2 32.52 09T308 a .375 .156 .031 .173

431 120404 a .500 .187 .016 .217 432 120408 a .500 .187 .031 .217 433 120412 s .500 .187 .047 .217

TCMT1.81.50.5FP TCMT090202-FP a .219 .094 .008 .098

S1D1

7°

øD2Re

1.81.51FP 090204-FP a .219 .094 .016 .098 21.50.5FP 110202-FP a .250 .094 .008 .110 21.51FP 110204-FP a .250 .094 .016 .110 32.51FP 16T304-FP a .375 .156 .016 .173

TCMT1.81.51LP TCMT090204-LP a .219 .094 .016 .098

D1

7°

S1

øD2Re 1.81.52LP 090208-LP a .219 .094 .031 .098 21.51LP 110204-LP a .250 .094 .016 .110 21.52LP 110208-LP a .250 .094 .031 .110 32.51LP 16T304-LP a .375 .156 .016 .173 32.52LP 16T308-LP a .375 .156 .031 .173



UE6110INSERTS




Geometry

Standard

Medium Cutting

RR

Medium Cutting

FP

Finish Cutting

LP

Light Cutting

MP

Medium Cutting

Standard

Medium Cutting

FP

Finish Cutting

LP

Light Cutting

20

UE6110 D1 S1 Re D2

TCMT1.81.51MP TCMT090204-MP a .219 .094 .016 .098

D1

7°

øD2Re

S1

1.81.52MP 090208-MP a .219 .094 .031 .098 2.521MP 130304-MP a .313 .125 .016 .134 21.51MP 110204-MP a .250 .094 .016 .110 21.52MP 110208-MP a .250 .094 .031 .110 32.51MP 16T304-MP a .375 .156 .016 .173 32.52MP 16T308-MP a .375 .156 .031 .173 32.53MP 16T312-MP a .375 .156 .047 .173TCMT1.81.51 TCMT090204 a .219 .094 .016 .098

S1D1

Re

7°

øD2

21.50.5 110202 a .250 .094 .008 .110 21.51 110204 a .250 .094 .016 .110 21.52 110208 a .250 .094 .031 .110 2.521 130304 a .313 .125 .016 .134 32.51 16T304 a .375 .156 .016 .173 32.52 16T308 a .375 .156 .031 .173 32.53 16T312 s .375 .156 .047 .173VCMT220.5FP VCMT110302-FP a .250 .125 .008 .110

øD2

7°S1

35° D1

Re 221FP 110304-FP a .250 .125 .016 .110 331FP 160404-FP a .375 .187 .016 .173 332FP 160408-FP a .375 .187 .031 .173

VCMT331FV VCMT160404-FV s .375 .187 .016 .173

S1

7°

Re

35° D1

øD2

332FV 160408-FV s .375 .187 .031 .173

VCMT221LP VCMT110304-LP a .250 .125 .016 .110

D1

ReøD

2

7°S1

35°


VCMT331MP VCMT160404-MP a .375 .187 .016 .173

øD2

7°S1

35° D1

Re 332MP 160408-MP a .375 .187 .031 .173 333MP 160412-MP a .375 .187 .047 .173

VCMT221 VCMT110304 a .250 .125 .016 .110

7°

35° S1

Re

D1

øD2 331 160404 a .375 .187 .016 .173

332 160408 a .375 .187 .031 .173 333 160412 a .375 .187 .047 .173



Geometry

MP

Medium Cutting

Standard

Medium Cutting

FP

Finish Cutting

FV

Finish Cutting

LP

Light Cutting

MP

Medium Cutting

Standard

Medium Cutting

21

UE6110 D1 S1 Re D2

WCMT1.210.5 WCMT020102 a .156 .063 .008 .091

øD2

7°S1

80°

D1Re

1.211 020104 a .156 .063 .016 .091 1.51.50.5 L30202 a .187 .094 .008 .091 1.51.51 L30204 a .187 .094 .016 .091 21.50.5 040202 a .250 .094 .008 .110 21.51 040204 a .250 .094 .016 .110 32.51 06T304 a .375 .156 .016 .173 32.52 06T308 a .375 .156 .031 .173

UE6110 D1 S1 Re D2

CPMT21.51SQ CPMT060204-SQ a .250 .094 .016 .110Re

D180° S1

Re

11° 32.51SQ 09T304-SQ a .375 .156 .016 .173 32.52SQ 09T308-SQ a .375 .156 .031 .173

CPMT21.51MQ CPMT060204-MQ a .250 .094 .016 .110

11°

S180° D1

Re Re 21.52MQ 060208-MQ a .250 .094 .031 .110 32.51MQ 09T304-MQ a .375 .156 .016 .173 32.52MQ 09T308-MQ a .375 .156 .031 .173

CPMX2.51.51 CPMX080204 a .313 .094 .016 .138 Re

D180° S1

øD2

11°

2.51.52 080208 a .313 .094 .031 .138 321 090304 a .375 .125 .016 .181 322 090308 a .375 .125 .031 .181



UE6110



Geometry

SQ

MQ

Standard

Medium Cutting


INSERTSa 7° Positive inserts (With hole)



Geometry

Standard

Medium Cutting

22

UE6110 D1 S1 Re

SPMR321 SPMR090304 a .375 .125 .016

S1

Re

D1

11°

322 090308 a .375 .125 .031 421 120304 a .500 .125 .016 422 120308 a .500 .125 .031

SPMN322 SPMN090308 a .375 .125 .031

S1D1

Re

11°

421 120304 s .500 .125 .016 422 120308 a .500 .125 .031 423 120312 s .500 .125 .047

TPMT21.50.5SQ TPMT110202-SQ a .250 .094 .008

11°

S1D1

Re 21.51SQ 110204-SQ a .250 .094 .016 21.52SQ 110208-SQ a .250 .094 .031

TPMT21.51MQ TPMT110204-MQ a .250 .094 .016

11°

S1D1

Re 21.52MQ 110208-MQ a .250 .094 .031 32.51MQ 16T304-MQ a .375 .156 .016 32.52MQ 16T308-MQ a .375 .156 .031

TPMR221 TPMR110304 a .250 .125 .016

S1

11°

D1

Re 222 110308 a .250 .125 .031 321 160304 a .375 .125 .016 322 160308 a .375 .125 .031 323 160312 a .375 .125 .047

TPMN221 TPMN110304 a .250 .125 .016

Re

11°

S1D1

222 110308 a .250 .125 .031 321 160304 a .375 .125 .016 322 160308 a .375 .125 .031 323 160312 s .375 .125 .047 431 220404 a .500 .187 .016 432 220408 a .500 .187 .031 433 220412 a .500 .187 .047



Geometry

Standard

Light toMedium Cutting

Flat Top

SQ

MQ

Standard

Light toMedium Cutting

Flat Top

a 11° Positive inserts (Without hole)

300100 200

UE6110

2010

UE6110

CNMG434MA WNMG433MW TNMG332RP

785 690 820

.012 ─ .016 .012 .010

.118 ─ .157 .118 .079

Insert

Workpiece

52100 4140 4130

Cuttin

g Cond

itions Cutting Speed (SFM)

Feed (IPR)

Depth of Cut (inch)

Coolant Wet cutting Wet cutting Wet cutting

Results

UE6110 achieved 1.5 times longer tool life without any abnormal wear due to its excellent wear resistance compared to a competitor's product.

UE6110 achieved more than double tool life due to its excellent wear resistance compared to a competitor's product.

UE6110 prevented crater wear due to its excellent wear resistance compared to a competitor's product.

APPLICATION EXAMPLES

Pieces/corner

CompetitorʼsP10 coating

CompetitorʼsP10 coating

Pieces/corner UE6110 conventional

URL : (Tools specifications subject to change without notice.)

LOS ANGELES HEAD OFFICE11250 Slater Avenue, Fountain Valley, CA 92708TEL : 714-352-6100 FAX : 714-668-1320

CHICAGO OFFICE1314B North Plum Grove Road, Schaumburg, IL 60173TEL : 847-252-6300 FAX : 847-519-1732

TORONTO OFFICE6535, Millcreek Drive, Units, 63&64, Mississauga, Ontario L5N 2M2, CanadaTEL : 905-814-0240 FAX : 905-814-0245

MMC METAL DE MEXICO, S.A. DE C.V.Av. La Cañada No.16, Parque Industrial Bernardo Quintana,El Marques, Queretaro, CP76246, MexicoTEL : +52-442-221-6136 FAX : +52-442-221-6134

Customer Service : 800-523-0800Technical Service : 800-486-2341

EXP-12-E028Printed in U.S.A. 4/13

For your safetyaDon't touch breakers and chips without gloves. aPlease machine within recommended application range, and exchange expired tools with new parts in advance. aPlease use safety cover and wear safety glasses. aWhen using compounded cutting oils, please take fire prevention. aWhen attaching chips or spare parts, please use the attached wrench or driver. aWhen using tools in revolution machining, please make a trial run to check run-out, vibration, abnormal sounds etc.

Documents

TOOLS NEWS B089A ; CVD Coated Grade for Steel Turning UE6110 · 2013. 8. 9. · 1 1 2 CVD Coated Grade for Steel Turning Features High Crater Wear Resistance High Flank Wear Resistance