FORD FIESTA ST

SHIFTER PLATE

8

Pry off the shifter cable from the shifterarm with the flat head screw drivers.

9

Boomba Shifter Plate ready forinstallation.The extra hole in the bottom plate shouldbe on the same side that the pivot ballduring installation.

10

Slide the Boomba Shifter Plate over theshifter arm.

11

Secure the shifter plate to the bottomplate with provided screws. Reconnect theshifter cable. 12

Reinstall the air supply tube, the vent lineand the air filter box. Tighten all hoseclamps and bolts. Reconnect the MAFsensor.

MATERIALS REQUIRED

None

TOOLS REQUIRED

M7 socket wrenchM10 socket wrenchT25 Torx bitLarge flat screw driver

Large flat screw drivers

1

Remove plastic vacuum hose from rubberadaptor on the top of valve cover (leaverubber adaptor in place).1

Disconnect the MAF sensor.

2Remove the air filter cover.

3

Remove the air filter.

4

Remove the vent line.

5

Loosen the air pipe clamp and remove theair pipe.

6

Snap off the air supply duct from the latch.

7

Remove the air box.