4
TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET AIM:-Making Connection of one Switch and one socket circuit board. Material Required:-1.One 6 Amp Switch 2.One 6 Amp Socket 3.One 3-Pin Plug 4.Flexible Electric wire 5.Switch Board Tools Required:- Plier and Screw Driver

TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET AIM:- Making Connection of one Switch and one socket circuit board. Material Required:- 1.One 6 Amp

Embed Size (px)

Citation preview

Page 1: TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET AIM:- Making Connection of one Switch and one socket circuit board. Material Required:- 1.One 6 Amp

TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET

AIM:-Making Connection of one Switch and one socket

circuit board.Material Required:-1.One 6 Amp Switch

2.One 6 Amp Socket 3.One 3-Pin Plug 4.Flexible Electric wire 5.Switch Board

Tools Required:- Plier and Screw Driver

Page 2: TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET AIM:- Making Connection of one Switch and one socket circuit board. Material Required:- 1.One 6 Amp

Diagrams of Material /Tools Required

On-Off-Switch

Socket

Electric WirePlier and Screw Driver

Page 3: TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET AIM:- Making Connection of one Switch and one socket circuit board. Material Required:- 1.One 6 Amp

METHOD

1.Fit the On-Off Switch and Socket on the Gang Box (switch board)2.Connect the Live wire (phase wire) with one point of on-off-switch3.Connect the other point of on-off-switch with one lower side point of the socket4.Connect the Neutral Wire with other side lower point of the socket.5.Connect the Earth wire with top point of the Socket.6.Take a three pin plug top and connect it with outside wire.

Page 4: TOPIC-MAKING CONNECTION OF ONE SWITCH AND ONE SOCKET AIM:- Making Connection of one Switch and one socket circuit board. Material Required:- 1.One 6 Amp