2
total aspect marine restoration and protection of marine glass Just like metal, glass corrodes, even new glass, chemically attacked by alkaline, seawater deposits, salt spray, lime scale, metal oxides and solvent based abrasive cleaning products. Total Aspect Marine uses the ClearShield ™ Easy Clean ‘Non-Stick’ Glass Surface Renovation and Protection System to rectify all of the above glass related problems. ClearShield ™ chemically bonds with the glass surface, it is non toxic, chemically inert, non hazardous and will not peel, crack or flake. ClearShield ™ also creates ‘greener’ glass, requiring the use of less water, no harsh cleaning products, takes less time and energy to clean the glass, producing a sparkling finish for satisfied owners, guests and crew. The hygiene and sand blasted grades are also excellent for use on inner areas such as, shower rooms and galley areas where glass and ceramic surfaces can also be treated. Available as a specialist service to the luxury yacht and super yacht owner and as a DIY kit for those with smaller craft or craft with a lesser glass surface area. •’Non-Stick’ easy clean glass •Specialist on site application •Aftercare product for long life For more information or to book an on site test please contact total aspect marine PO Box 836 Apartado 410 Horsham 07700 Mahón RH12 9FJ Menorca 07879 612249 670 222187 [email protected]

Total Aspect marine

Embed Size (px)

DESCRIPTION

Total Aspect Marine

Citation preview

Page 1: Total Aspect marine

total aspect marine

restoration and protectionof marine glass

Just like metal, glass corrodes, even new glass, chemically attacked by alkaline, seawater deposits, salt spray, lime scale, metal oxides and solvent based abrasive cleaning products.

Total Aspect Marine uses the ClearShield ™ Easy Clean ‘Non-Stick’ Glass Surface Renovation and Protection System to rectify all of the above glass related problems.

ClearShield ™ chemically bonds with the glass surface, it is non toxic, chemically inert, non hazardous and will not peel, crack or flake. ClearShield ™ also creates ‘greener’ glass, requiring the use of less water, no harsh cleaning products, takes less time and energy to clean the glass, producing a sparkling finish for satisfied owners, guests and crew.

The hygiene and sand blasted grades are also excellent for use on inner areas such as, shower rooms and galley areas where glass and ceramic surfaces can also be treated.

Available as a specialist service to the luxury yacht and super yacht owner and as a DIY kit for those with smaller craft or craft with a lesser glass surface area.

•’Non-Stick’ easy clean glass•Specialist on site application•Aftercare product for long life

For more information or to book an on site test please contacttotal aspect marinePO Box 836 Apartado 410Horsham 07700 MahónRH12 9FJ Menorca07879 612249 670 222187

[email protected]

Page 2: Total Aspect marine

Protection

The prepared surface is neutralised, removing all the moisture from the glass. ClearShield ™ ‘Non-Stick’ Glass Surface Protection is then applied. A totally clear bonding less than a micron thick. After a short curing period the glass is cleaned off leaving a sparkling finish.

Restoration

The glass is first tested and prepared using pre-cleaner and lime scale remover. Then it is chemically renovated, removing all the organic and in-organic contamination leaving a pure surface ready for the protection to be applied.

Maintenance

To keep the level of protection at its optimum performance, using the recommended after care solution on a regular basis will keep the ‘easy clean’ property of the glass for many years. No abrasive or chemical cleaning products are required, simply wash down with the diluted after care solution and dry off with lint free paper towel.